* g10/build-packet.c (do_key): Do not use the header length specified
by the public key packet from the keyring, but let 'write_header2'
compute the required length.
--
Specifically exporting RSA keys of length 1024 failed, as the encoded
public key packet requires 141 bytes a length that fits into one byte,
but the secret key is significantly larger, making the export fail.
GnuPG-bug-id: 2307
Signed-off-by: Justus Winter <justus@g10code.com>
* configure.ac (USE_GPG2_HACK): New ac_define am_conditional.
* common/homedir.c (gnupg_module_name): Replace use of macro
NAME_OF_INSTALLED_GPG.
* g10/keygen.c (generate_keypair): Ditto.
* g10/Makefile.am (bin_PROGRAMS): Remove.
(noinst_PROGRAMS): Add gpg or gpg2 and gpgv or gpg2.
(gpg2_hack_list): New.
(use_gpg2_hack): New.
(gpg2_SOURCES): Rename to gpg_SOURCES.
(gpgv2_SOURCES): Rename to gpgv_SOURCES.
(gpg2_LDADD): Rename to gpg_LDADD.
(gpgv2_LDADD): Rename to gpgv_LDADD.
(gpg2_LDFLAGS): Rename to gpg_LDFLAGS.
(gpgv2_LDFLAGS): Rename to gpgv2_LDFLAGS.
(install-exec-hook): Remove WinCE specific rules and add new rules.
(uninstall-local): Uninstall gpg/gpg2 and gpgv/gpgv2.
* tests/openpgp/Makefile.am (required_pgms): s/gpg2/gpg/.
* tests/openpgp/defs.inc: Ditto.
* tests/openpgp/gpgtar.test: Ditto.
* tests/openpgp/mkdemodirs: Ditto.
* tests/openpgp/signdemokey: Ditto.
* Makefile.am (DISTCHECK_CONFIGURE_FLAGS): Remove obsolete
--enable-mailto, add --enable-gpg2-is-gpg.
--
Although we need to duplicate some automake generated code this method
allows to easily switch the name of the installed target using the
configure option "--enable-gpg2-is-gpg".
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (opendb): Guard call to timeout function.
--
GnuPG-bug-id: 2294
Fix not tested but is pretty obvious.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (ask_key_flags): Improve message.
--
Because the curve is only selected after the capabilities are queried
we do not know whether ECDSA or EdDSA will eventually be used. When
printing the possible capabilities we now use print "ECDSA/EdDSA" for
the algorithm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (MY_USE_ECDSADH): New macro local to ask_curve.
(ask_curve): Use a fixed table of curve names and reserve a slot for
Curve448. Simplify CurveNNNN/EdNNNN switching.
(ask_curve): Remove the Curve25519 is non-standard prompt.
--
Given that ECC generation is only available in export mode and that
gpg will in any case support our current ed2559/cv25519 definition the
extra prompt does not make anymore sense.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/Makefile.am (EXTRA_DIST): Add t-stutter-data.asc.
(module_tests): Add t-stutter.
(t_stutter_SOURCES): New variable.
(t_stutter_LDADD): New variable.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Add a test to check that the Mister and Zuccerato attack described in
"An Attack on CFB Mode Encryption As Used by OpenPGP" works.
* g10/keygen.c (do_generate_keypair): Check for errors, in which case
'pri_psk' is NULL.
Fixes-commit: bf9d1248
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/packet.h: Include "util.h".
* g10/encrypt.c (encrypt_seskey): Don't mark as static.
* g10/gpgcompose.c: New file.
* g10/Makefile.am (noinst_PROGRAMS): Add gpgcompose.
(gpg2_SOURCES): Split everything but gpg.c into...
(gpg_sources): ... this new variable.
(gpgcompose_SOURCES): New variable.
(gpgcompose_LDADD): Likewise.
(gpgcompose_LDFLAGS): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/encrypt.c (write_pubkey_enc_from_list): Split the body of this
function out into...
(write_pubkey_enc): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/build-packet.c (do_plaintext): Change the semantics such that if
PT->BUF is NULL, it is the caller's responsibility to write the
content (and disable partial body length mode, if appropriate).
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/build-packet.c (sig_to_notation): Break printing of binary
notations into...
(notation_value_to_human_readable_string): ... this new function.
Provide a small preview of the binary data substituting non-printable
characters with '?'.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/sig-check.c (check_key_signature2): If SIG->CLASS is
unsupported, show some debugging information. Don't use BUG to fail.
Just return GPG_ERR_BAD_SIGNATURE.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/build-packet.c (write_header2): Make sure the length bits are
cleared. Fail if HDRLEN is set and the specified length can't be
encoded in the available space.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/build-packet.c (do_plaintext): Use ctb_new_format_p to check the
packet's format.
(write_header2): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/build-packet.c (sig_to_notation): Avoid an unnecessary copy of
the data: the size of the packet is fixed.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/build-packet.c (do_symkey_enc): Use iobuf_write instead of
iobuf_put in a loop. Use iobuf_copy instead of iobuf_read and
iobuf_write in a loop. Move the memory wiping from here...
* common/iobuf.c (iobuf_copy): ... to here.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keyedit.c (sig_comparison): New function.
(fix_key_signature_order): Merge functionality into...
(check_all_keysigs): ... this function. Rewrite to eliminate
duplicates and use a systematic approach to detecting and moving
signatures that are out of order instead of a heuristic.
(fix_keyblock): Don't call fix_key_signature_order. Call
check_all_keysigs instead after collapsing the uids.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2236
* g10/sig-check.c (hash_uid_node): Rename from this...
(hash_uid_packet): ... to this. Take a PKT_user_id instead of a
KBNODE.
(check_key_signature2): Split the basic signature checking
functionality into...
(check_signature_over_key_or_uid): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keyedit.c (print_and_check_one_sig): Split the print
functionality into...
(print_one_sig): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/sig-check.c (check_signature_end): Break the basic signature
check into...
(check_signature_end_simple): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keyedit.c (menu_addrevoker): Use format_keyid rather than
manually formatting the keyid.
* g10/keygen.c (card_write_key_to_backup_file): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keydb.h (keyid_cmp): New function.
* g10/keyid.c (pk_keyid): New function.
(pk_main_keyid): New function.
(keyid_copy): New function.
(pk_keyid_str): New function.
* g10/packet.h (PKT_public_key): Update comments for main_keyid and
keyid.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Before accessing pk->keyid, it is necessary to call keyid_from_pk (pk,
NULL) to ensure that pk->keyid is valid. Because it is easy to forget
to do this, these accessor functions take care of it.
* g10/keydb.h: Remove agent_open, agent_close declarations/
* g10/migrate.c: #include <unistd.h> for access()
--
agent_open() is only defined statically in common/simple-pw-query.c,
it is neither used nor referenced anywhere else. agent_close doesn't
exist anywhere. The removal of these declarations removes an
unecessary inclusion of libassuan.h.
migrate.c was relying on keydb.h -> libassuan.h -> unistd.h for the
declaration of access(), so we now handle that explicitly instead.
* g10/armor.c (radix64_read): If the = is followed by the string "3D",
check if the following four characters are valid radix 64 and are
followed by a new line. If so, warn and ignore the '3D'.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2250
* g10/build-packet.c (calc_header_length): Return the correct haeder
size when LEN is 0. Fix documentation.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2240
* g10/keyid.c (format_keyid): Return a char *, not a const char *. If
BUFFER is NULL, then set LEN to the static buffer's size.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tdbio.c (tdbio_set_dbname): Return earlier if !CREATE. Check
the directory and create it if none before calling take_write_lock.
--
Thanks to Marc Deslauriers for the bug report and his patch.
GnuPG-bug-id: 2246
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
Using "help" as value lists the options. Not having the current
options in the help text also makes it easier to keep translations
clean.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (learn_status_cb): Don't use NULL for strcmp.
--
With libgcrypt not supporting cv25519, gpg segfaults.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
Some of the options are too rarley used to deserve an entry in the
skeleton config file. Some are even the default for many years.
Added auto-key-locate because that is a very useful option.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (ask_user_id): Allow empty name.
--
The --quick-gen-key command allows this and further some mail
providers require that a key has only the mail address to allow for
anonymous accounts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/revoke.c (gen_standard_revoke): Improve header text for the
file. Add info output.
--
GnuPG-bug-id: 1724
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-dirmngr.c (gpg_dirmngr_ks_list): Make R_KEYSERVER optional.
* g10/keyserver.c (keyserver_any_configured): New.
(keyserver_put): Remove arg keyserver because this will always receive
opt.keyserver which is anyway used when connecting dirmngr. Do not
check opt.keyserver.
(keyserver_import_cert): Replace opt.keyserver by
keyserver_any_configured.
* g10/mainproc.c (check_sig_and_print): Ditto.
* g10/import.c (revocation_present): Ditto.
* g10/getkey.c (get_pubkey_byname): Ditto.
* g10/gpgv.c (keyserver_any_configured): Add stub.
* g10/test-stubs.c (keyserver_any_configured): Add stub.
--
The keyserver should be configured in dirmngr.conf and thus we can't
use opt.keyserver in gpg to decide whether a keyserver has been
configured.
GnuPG-bug-id: 2147
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (tdb_get_validity_core): Print message only in debug
mode.
--
This makes only sense for debugging.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c: Make use of print_further_info to reduce the number of
different error messages to be translated. Also streamline some
messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c: Include ttyio.h. Change many strings to help
translating. Make use of ngettext wehere needed.
(CONTROL_L): New.
(TIME_AGO_UNIT_SMALL_NAME): Remove this and all similar *_NAME macros.
(time_ago_unit): Remove.
(get_trust): Use tty_prints and cpr_get only for the actual prompt.
Add Ctrl-L hack.
(show_statistics): Use two English strings for singular and plural.
* po/POTFILES.in: Add tofu.c.
--
These changes are required for proper translation. More to changes
may be needed, though.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sig-check.c (check_signature_metadata_validity): Use days if
useful.
--
Using days instead of a high number of seconds is for the majority of
users a better measurement.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyring.c (keyring_lock) [W32]: Flush the close cache before
locking.
* kbx/keybox-init.c (keybox_lock) [W32]: Close the file before
locking.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-update.c (create_tmp_file): Move some code to...
* kbx/keybox-util.c (keybox_tmp_names): new.
* g10/keyring.c: Include keybox.h.
(create_tmp_file): Replace parts by keybox_tmp_names.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add LIST_SHOW_USAGE.
--
The usage flags are often useful and they don't take away much space
in a key listing. Thus it is better to have them enabled by default.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-init.c (keybox_register_file): Change interface to return
the token even if the file has already been registered.
* g10/keydb.c (primary_keyring): Rename to primary_keydb.
(maybe_create_keyring_or_box): Change return type to gpg_error_t.
(keydb_add_resource): Ditto. s/rc/err/.
(keydb_add_resource): Mark an already registered as primary.
* sm/keydb.c (maybe_create_keybox): Change return type to gpg_error_t.
(keydb_add_resource): Ditto. s/rc/err/.
(keydb_add_resource): Adjust for changed keybox_register_file.
--
This change aligns the registering of keyboxes with those of
keyrings. This fixes a potential bug:
gpg --keyring foo.kbx --keyring bar.gpg --keyring foo.kbx
would have marked bar.gpg as primary resource and thus inserting new
keys there. The correct and now fixed behavior is to insert to
foo.kbx.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
I am considering some changes and thus better start off by switching
to standard GNU indentation. This patch also changes comment lines
like
if (foo)
/* Comment on foo. */
{
to
if (foo)
{ /* Comment on foo. */
or
if (foo) /* Comment on foo. */
{
to make the brace of the opening block stand out immediately.
Further stars on the left are added to longer comments because that
makes the code easier to read by disabled hackers, when reading
without font locking, and for reading black-white printouts.
--
When using tags (e.g. GNU global) to navigate the source code it is
way easier to have the documentation close to the function we are
looking at. Having the documentation in the header file would require
an extra manual lookup to understand the function.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c: Allow arg RET_KEYBLOCK to be NULL.
--
This change adds the expected behavior for the getkey_next function
to fix this NULL de-ref.
GnuPG-bug-id: 2212
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c: Include membuf.h and host2net.h.
(key_to_sshblob): New.
(export_ssh_key): New.
* g10/gpg.c (aExportSshKey): New.
(opts): Add command.
(main): Implement that command.
--
GnuPG-bug-id: 2212
I have done only a few tests rights now and the ECDSA curves do not
yet work. However ssh-keygen -l accept RSA and ed25519 keys exported
using this command.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_WARNING): New.
* g10/call-agent.c (warn_version_mismatch): New.
(start_agent): Call warn function.
* g10/call-dirmngr.c: Include status.h.
(warn_version_mismatch): New.
(create_context): Call warn function.
* sm/call-agent.c (warn_version_mismatch): New.
(start_agent): Call warn function.
(gpgsm_agent_learn): Call warn function.
* sm/call-dirmngr.c (warn_version_mismatch): New.
(prepare_dirmngr): Call warn function.
--
We have seen too often bug reports which are due to still running old
versions of the daemons. To catch this problematic use we now print
warning messages and also provide the warning via the status
interface.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp.c: Include membuf.h.
(get_assuan_server_version): New.
* g10/call-agent.c (agent_get_version): Use new function.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyid.c (keygrip_from_pk): Return an error code.
--
The error was show but the function did not return it. This change
should improve error messages for unknown algorithms.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-dirmngr.c (dns_cert_status_cb): Store URL status in the URL
param. The old code was entirely buggy (c+p error).
--
Fixes-commit: 154f3ed2
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyid.c (keystrlen): If opt.keyid_format is KF_DEFAULT unset,
default to KF_SHORT.
(format_keyid): Default to KF_SHORT, not KF_0xLONG.
--
Without this fix, gpgv2 fails with:
gpgv: Ohhhh jeeee: ... this is a bug (keyid.c:342:keystrlen)
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/parse-packet.c (parse_key): Check for premature end of salt.
--
This has no security implications because an arbitrary salt could have
also been inset by an attacker.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (change_passphrase): Remove useless init of ANY.
(keyedit_quick_adduid): Remove useless setting of ERR.
* g10/parse-packet.c (parse_key): Remove PKTLEN from condition because
it has been checked before the loop.
(parse_plaintext): Remove useless init of PKTLEN.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (ask_keysize): Use 768 for the minimal value for DSA in
export mode. Improve readability.
--
GnuPG-bug-id: 2209
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkeys): Fix double free.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Fixes-commit: 7195b943
Note: this error is not a security problem, because this code path is
currently never executed.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Werner pointed out that a special error message is not needed: the
error code (as displayed by gpg_strerror) will indicate what went
wrong.
* g10/keyedit.c (keyedit_menu): Remove cmdCHECKBKUPKEY support.
--
GnuPG-bug-id: 2169
It was introduced by the commit 9e834047 in 2009. Then, we moved
private key handling to gpg-agent which broke this subcommand.
Note: This subcommand was not supported in 1.4 and 2.0.
--
I must have mixed the up during testing. The old one is just one
keyserver and the new one is the OnionBalance hidden service. See
https://sks-keyservers.net/overview-of-pools.php
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (struct pubkey): Rename to pubkey_s.
(pubkey_t): New. Change all struct pubkey_s to use this type.
* g10/getkey.c (get_pubkeys): Rename arg keys to r_keys.
--
It is common in GnuPG to use a suffix of _s for struct names. There
is no technical need for this (actually this pattern comes from pre
ANSI C compilers which had no separate namespaces) but it avoid
surprises when reading the code.
Adding the pubkey_t type is mainly to improve font locking by using
the common suffix _t for a typedefed type.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (card_write_key_to_backup_file): Simplify by using
hexfingerprint.
--
Note that the extra blank added to FPRBUF in the old code was not
needed because write_status_text_and_buffer already ensures that
there will be a space.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (parse_def_secret_key): Do not make strings passed to
log_debug translatable.
--
Debug output is intended to be used along with the source or to be
send to the developers. Thus translations are at best not helpful.
* g10/gpg.c (struct result): Move from here...
* g10/keydb.h (struct pubkey): ... to here. Update users.
* g10/gpg.c (check_user_ids): Move from here...
* g10/getkey.c (get_pubkeys): ... to here. Update users. Use
get_pubkey_byname to look up the keys (this also prunes invalid keys).
(pubkey_free): New function.
(pubkeys_free): New function.
* g10/gpg.c (main): Don't check for ambiguous key specifications.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Regression-due-to: e8c53fc
This change not only moves the checks for ambiguous key specifications
from gpg.c to getkey.c, it also disables the checks. The old code was
too divorced from the actual key lookups and, as such, it reproduced
the logic. Unfortunately, the reproduction was a poor one: despite
fixing some inconsistencies (e.g., 10cca02), it still didn't deal with
group expansion or the auto key lookup functionality. Given the
amount of instability introduced by this change, we (Neal & Werner)
decided it is better to defer introducing this functionality until
2.3.
* g10/gpg.c (main): If --encrypt-to-default-key is specified, don't
add --default-key's value to REMUSR here...
* g10/pkclist.c (build_pk_list): ... do it here.
* tests/openpgp/Makefile.am (TESTS): Add default-key.test.
* tests/openpgp/default-key.test: New file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/pkclist.c (build_pk_list): Remove parameter use, which is always
called set to PUBKEY_USAGE_ENC. Update callers.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (check_user_ids): When checking for ambiguous keys, ignore
encryption-only keys when a signing key is needed and vice-versa.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keydb.c (keydb_update_keyblock): Don't replace the record at the
current offset. After taking the lock, extract the fingerprint from
the keyblock, find it and then replace it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2193
Between locating the record to update and actually updating the
keyblock, it is possible that another process modifies the keyring,
which causes the update to corrupt the keyring. This is due to a time
of check to time of use bug. The fix is straightforward: both
operations must be done while holding the lock. This changes the
semantics of the function slightly, but no callers need to be
modified. Further, it now becomes impossible to replace key A with B;
this function will only ever update B.
* g10/getkey.c (parse_def_secret_key): Display the key that is
invalid, not the search description.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (main): When --default-key or --encrypt-to-default-key is
taken from the config file, note this.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Regression-due-to: 28311d1
* g10/keydb.h (PK_LIST_ENCRYPT_TO): Change from a macro to an enum.
(PK_LIST_HIDDEN): Likewise.
(PK_LIST_CONFIG): Likewise.
(PK_LIST_SHIFT): Likewise.n
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Using an enum has the advantage that the symbol can be used in gdb.
* g10/keygen.c (do_ask_passphrase, generate_raw_key)
(gen_card_key_with_backup, save_unprotected_key_to_card): Remove.
--
Now, key generation is done by gpg-agent. Asking passphrase is done
through pinentry invoked by gpg-agent. It is done by
new internal function of card_store_key_with_backup.
* g10/export.c (receive_seckey_from_agent): New.
(do_export_stream): Use it.
--
Also fixed a memory leak of WRAPPEDKEY on a successful path of
build_packet.
In the log message, key is now by a hexgrip instead of a format by
keystr_with_sub.
* g10/gpg.c (check_user_ids): When checking for ambiguous keys, ignore
disabled, revoked and expired keys (if appropriate for the provided
option).
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2186
* g10/getkey.c (parse_def_secret_key): Do not make debug messages
translatable. Make use of print_reported_error.
--
This patch also passes all required arguments to log_debug ;-).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (print_reported_error): New.
--
Often the user is only interested in a catch all error code like "not
found" but sometimes it is useful to also see the real reason. By
this function this can easily be achieved. Example:
err = search_for_key (keyid)
if (err)
{
log_info ("error locating key '%s': %s\n",
keyid, gpg_strerror (GPG_ERR_NOT_FOUND));
print_reported_error (err, GPG_ERR_NOT_FOUND);
}
results in
gpg: error locating key 'foobar': not found
gpg: (reported error: no keyring <keybox>)
where the second line is only printed in verbose mode and if ERR is
not GPG_ERR_NOT_FOUND.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search.c (keybox_seek): New function.
* g10/keydb.c (keydb_search): When reading from the cache, seek to
just after the cached record.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* kbx/keybox-search.c (keybox_offset): New function.
* g10/keydb.c (struct keyblock_cache): Add fields resource and offset.
(keyblock_cache_clear): Reset HD->KEYBLOCK_CACHE.RESOURCE and
HD->KEYBLOCK_CACHE.OFFSET.
(keydb_search): Don't use the cached result if it comes before the
current file position. When caching an entry, also record the
position at which it was found.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2187
* g10/keyedit.c: Print ownertrust in TOFU+PGP trust model.
--
The key editor currently prints out the ownertrust value assigned
to a key only when using the classic or PGP trust models; but
that value is also meaningful in the recently introduced TOFU+PGP
combined model.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* g10/getkey.c (parse_def_secret_key): Don't just check if a secret
key is available for the public key, also consider subkeys. Also
check that the key has the signing capability, is not revoked, is not
expired and is not disabled. Print a warning if there was a least one
value passed to --default-key and all were ignored.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Regression-due-to: e16d7168
* g10/import.c (struct stats_s): Rename to import_stats_s. Change all
users.
* g10/main.h (import_stats_t): New. Change fucntions to use this
instead of a void pointer.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_search_desc_dump): Fix buffer overflow.
--
Signed-off-by: Neal H. Walfield <neal@walfield.org>
Regression-due-to: 11ec478
Note: this buffer overflow will only occur if --debug=lookup is passed
to gpg and a search by fingerprint is done.
* g10/gpg.c (check_user_ids): Don't error out if a key occurs multiple
times in the keyring. Instead, print a warning. When printing out
fingerprint prints, use format_hexfingerprint to format them.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/delkey.c (do_delete_key): Write ERROR status code with the error
location "delete_key.secret", when the user cancelled the operation on
Pinentry.
--
I changed the original patch to emit the full gpg_error_t code. -wk
* g10/keydb.h (PK_LIST_ENCRYPT_TO, PK_LIST_HIDDEN, PK_LIST_CONFIG)
(PK_LIST_SHIFT): New.
* g10/pkclist.c (build_pk_list): Use them here.
* g10/gpg.c (check_user_ids, main): Ditto.
* g10/gpg.c (main): Set PK_LIST_CONFIG for REMUSR and LOCUSR.
(check_user_ids): Skip check for command line specified options.
--
If a key has been given on the command line and it has not been
given by one of the encrypt-to options, we now skip the checks. The
reason is that the actual key selection code does its own checks and
provides proper status message to the caller to detect the wrong keys.
Without this we would break most frontends because they expect for
example STATUS_INV_RECP.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp.c (start_new_gpg_agent): Do not i18n string.
(start_new_dirmngr): Ditto.
* g10/mainproc.c (proc_encrypted): Ditto. Print only if debug is
enabled.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_new): Print an error message if needed. Also use
xtrycalloc because we return an error anyway.
* g10/delkey.c (do_delete_key): Handle error retruned by keydb_new.
* g10/export.c (do_export_stream): Ditto.
* g10/getkey.c (get_pubkey): Ditto.
(get_pubkey_fast): Ditto.
(get_pubkeyblock): Ditto.
(get_seckey): Ditto.
(key_byname): Ditto.
(get_pubkey_byfprint): Ditto.
(get_pubkey_byfprint_fast): Ditto.
(parse_def_secret_key): Ditto.
(have_secret_key_with_kid): Ditto.
* g10/import.c (import_one): Ditto.
(import_revoke_cert): Ditto.
* g10/keyedit.c (keyedit_quick_adduid): Ditto.
* g10/keygen.c (quick_generate_keypair): Ditto.
(do_generate_keypair): Ditto.
* g10/trustdb.c (validate_keys): Ditto.
* g10/keyserver.c (keyidlist): Ditto.
* g10/revoke.c (gen_desig_revoke): Ditto.
(gen_revoke): Ditto.
* g10/gpg.c (check_user_ids): Ditto.
(main): Do not print an error message for keydb_new error.
* g10/keylist.c (list_all): Use actual error code returned by
keydb_new.
* g10/t-keydb-get-keyblock.c (do_test): Abort on keydb_new error.
* g10/t-keydb.c (do_test): Ditto.
* g10/keyring.c (keyring_new): Actually return an error so that the
existing keydb_new error checking makes sense for a keyring resource.
(keyring_rebuild_cache): Take care of keyring_new returning an error.
--
Commit 04a6b903 changed keydb_new to return an error. However the
error was not checked at most places which we fix with this patch. To
make things easier keydb_new prints an error message itself.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (parse_def_secret_key): Change error message. Replace
log_debug by log_info.
* g10/gpg.c (check_user_ids): Make function static. Change error
messages.
(main): Change error messages.
* g10/revoke.c (gen_revoke): Ditto.
--
There are other smaller changes not described above.
This change tries to avoid new error messages so not to increase the
the number of translated strings or break too many existing
translations. It also tries to use existing strings and changes the
quoting to the most common style used in gpg.
Key specifications should in general use double quotes. Other values
should use single quotes. However. sometimes it is not easy to
distinguish between values given on the command line and key
specifications. According to old GNU coding standards diagnostics
should not start capitalized - whether this is a good idea is a
different thing but we used this rules for most strings. However,
strings which are used interactively should be properly capitalized
and end with a dot.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (check_user_ids): If the search description is for an
exact match (a keyid or fingerprint that ends in '!'), then use the
matching key, not the primary key.
* tests/openpgp/Makefile.am (TESTS): Add use-exact-key.test.
(priv_keys): Add privkeys/00FE67F28A52A8AA08FFAED20AF832DA916D1985.asc,
privkeys/1DF48228FEFF3EC2481B106E0ACA8C465C662CC5.asc,
privkeys/A2832820DC9F40751BDCD375BB0945BA33EC6B4C.asc,
privkeys/ADE710D74409777B7729A7653373D820F67892E0.asc and
privkeys/CEFC51AF91F68A2904FBFF62C4F075A4785B803F.asc.
(sample_keys): Add
samplekeys/E657FB607BB4F21C90BB6651BC067AF28BC90111.asc.
* tests/openpgp/privkeys/00FE67F28A52A8AA08FFAED20AF832DA916D1985.asc:
New file.
* tests/openpgp/privkeys/1DF48228FEFF3EC2481B106E0ACA8C465C662CC5.asc:
New file.
* tests/openpgp/privkeys/A2832820DC9F40751BDCD375BB0945BA33EC6B4C.asc:
New file.
* tests/openpgp/privkeys/ADE710D74409777B7729A7653373D820F67892E0.asc:
New file.
* tests/openpgp/privkeys/CEFC51AF91F68A2904FBFF62C4F075A4785B803F.asc:
New file.
* tests/openpgp/samplekeys/E657FB607BB4F21C90BB6651BC067AF28BC90111.asc:
New file.
* tests/openpgp/use-exact-key.test: New file.
* tests/openpgp/version.test: Install the new private keys.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Reported-by: Reported-by: Kristian Fiskerstrand
<kristian.fiskerstrand@sumptuouscapital.com>
Fixes-commit: 10cca02
* g10/tofu.c (record_binding): Change policy_old's type from an enum
tofu_policy to a long: this variable is passed by reference and a long
is expected.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Reported-by: Justus Winter <justus@g10code.com>
Fixes-commit: f77913e
* dirmngr/dirmngr.h (opt): Turn field 'keyserver' into an strlist.
* dirmngr/dirmngr.c (parse_rereadable_options): Allow multiple
--keyserver options.
* dirmngr/server.c (server_local_s): Add field 'tor_state'.
(release_uri_item_list): New.
(release_ctrl_keyservers): Use it.
(start_command_handler): Release list of keyservers.
(is_tor_running): New.
(cmd_getinfo): Re-implement "tor" subcommand using new fucntion.
(ensure_keyserver): Rewrite.
* g10/dirmngr-conf.skel: Add two keyserver options.
--
This feature is independent of --use-tor and automagically uses Tor if
available. The dirmngr.conf file needs to specify two keyservers to
make this work. For new installations this is done using the skeleton
file. This feature requires the Libassuan 2.4.2 to work.
This patch also fixes a memory leak of opt.keyserver en passant.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (check_user_ids): If the search description describes a
keyid or fingerprint and ends in a '!', include the '!' in the
rewritten description.
* common/userids.c (classify_user_id): Accept keyids and fingerprints
ending in '!'.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Reported-by: Kristian Fiskerstrand
<kristian.fiskerstrand@sumptuouscapital.com>
Fixes-commit: f99830b7
Fixes-commit: e8c53fca
* g10/keyedit.c (menu_expire): Use only one prompt.
--
The old code was anyway not fully i18n because it did not used
ngettext. Further we ran into const char*/char* conflicts on Windows
where we use a different gettext implementation.
FWIW: A better pattern in the case of a static and a malloced string
w/o error return on malloc failure would be:
const char *s;
char *s_buf;
s_buf = xtryasprintf ("%d foo", n);
if (!s_buf)
s = "several foo";
else
s = s_buf;
bar (s);
xfree (s_buf);
* g10/keyedit.c (menu_select_key): Use spacep and hexdigitp instead of
inline tests. Don't compare P to the suffix of the fingerprint. If P
appears to be a keyid, do an exact compare against the keyid. If it
appears to be a fingerprint, do an exact compare against the
fingerprint.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* common/stringhelp.c (format_text): New function.
* common/t-stringhelp.c (stresc): New function.
(test_format_text): New function. Test format_text.
* g10/tofu.c (get_trust): Use format_text to reflow long texts.
(show_statistics): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* common/stringhelp.c (utf8_charcount): Take additional parameter,
len. Process at most LEN bytes.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keyedit.c (menu_expire): Allow updating the expiration time of
multiple subkeys at once.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1944
* g10/revoke.c (gen_revoke): Provide a more descriptive error message
if searching for a key fails.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1987
* g10/trust.c (clean_one_uid): Avoid a computation involving an
uninitialized value.
--
Found using the Clang Static Analyzer.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/keyedit.c (menu_select_key): Take an additional argument, p.
Update callers. If P is a hex string, then assume that P is a key id
or fingerprint and select subkeys with matching key ids or
fingerprints.
* doc/gpg.texi: Update documentation for the key subcommand.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1423
Debian-bug-id: 610336
* g10/keyring.c (keyring_get_keyblock): If we encounter a legacy
packet after already having some non-legacy packets, then treat the
legacy packet as a keyblock boundary, not as part of the keyblock.
* g10/t-keydb-get-keyblock.c: New file.
* g10/t-keydb-get-keyblock.gpg: New file.
* g10/Makefile.am (EXTRA_DIST): Add t-keydb-get-keyblock.gpg.
(module_tests): Add t-keydb-get-keyblock.
(t_keydb_get_keyblock_SOURCES): New variable.
(t_keydb_get_keyblock_LDADD): Likewise.
--
Signed-off-by: Neal H. Walfield
GnuPG-bug-id: 2151
* g10/keydb.c (dump_search_desc): Rename from this...
(keydb_search_desc_dump): ... to this. Only process a single search
descriptor. Improve output. Don't mark as static. Update callers.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/options.h (opt.keyid_format): Add new value KF_DEFAULT.
* g10/keyid.c (format_keyid): New function.
(keystr): Use it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (check_user_ids): Differentiate between a second result
and an error. If the key specification is ambiguous or an error
occurs, set RC appropriately.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Reported-by: Werner Koch <wk@gnupg.org>
Suggested-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/tofu.c (fingerprint_str): Remove.
(tofu_register): Take a public key instead of a fingerprint as arg.
Use hexfingerprint() to get a fpr from the PK.
(tofu_get_validity): Ditto.
(tofu_set_policy, tofu_get_policy): Simplify by using hexfingerprint.
* g10/trustdb.c (tdb_get_validity_core): Pass the primary key PK to
instead of the fingerprint to the tofu functions.
--
This change has the advantage that we are not bound to a specific
fingerprint length and will thus helps us to implement rfc4880bis.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (get_trust): For the UTK check lookup the key by
fingerprint.
--
Extracting the keyid form the fingerprint is not a good idea because
that only works for v4 keys. It is also better to first read the key
and then extract the keyid from the actual available key.
The entire trusted-key stuff should be reworked to make use of
fingerprints.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (getkey_ctx_s): Add field "extra_list".
(get_pubkey_byname): Store strings in the context.
(getkey_end): Free EXTRA_LIST.
--
This fixes a use-after-free bug. It showed up with:
gpg --auto-key-locate local --locate-key wk@gnupg.org
The key was shown but also all other following keys in the keyring.
Bisecting showed d47e84946ee010917cfc3501062721b74afbb771 as culprit
but the actual cause was a part of:
Regression-due-to: b06f96ba4f57f55194efcd37a0e3a2aa5450b974
Signed-off-by: Werner Koch <wk@gnupg.org>
g10/keyring.c (keyring_search): Only mark the cache as completely
filled if we start the scan from the beginning of the keyring.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Reported-by: NIIBE Yutaka <gniibe@fsij.org>
A new feature (e8c53fc) turned up a bug whereby checking if a search
term matches multiple keys in the keyring causes the cache to be
inconsistent.
When we look for a key on the keyring, we iterate over each of the
keyblocks starting with the keyblock following the last result. For
each keyblock, we iterate over the public key and any subkeys. As we
iterate over each key, we first insert it into the cache and then
check if the key matches. If so, we are done.
In pseudo code:
for (i = last_result + 1; i < num_records; i ++)
keyblock = get_keyblock (i)
for (j = 1; j < len(keyblock); j ++)
key = keyblock[j]
update_cache (key)
if (compare (key, search_terms))
return ok
cache_filled = true
return ENOFOUND
When we look for the next match, we start with the following keyblock.
The result is that any subkeys following the key that matched are not
added to the cache (in other words, when a keyblock matches, the inner
loop did not necessarily complete and the subsequent search doesn't
resume it).
This patch includes a straightforward fix: only indicate the cache as
complete if we started the scan from the beginning of the keyring and
really didn't find anything.
* g10/trustdb.c (init_trustdb): If we can't read the trust model from
the trust DB, default to TM_PGP, not TM_TOFU_PGP.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (opendbs): If the TOFU DB format is set to auto and there
is no TOFU DB, default to the flat format.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/options.h (opt): Add field only_sign_text_ids.
* g10/gpg.c (enum cmd_and_opt_values): Add value oOnlySignTextIDs.
(opts): Handle oOnlySignTextIDs.
(main): Likewise.
* g10/keyedit.c (sign_uids): If OPT.ONLY_SIGN_TEXT_IDS is set, don't
select non-text based IDs automatically.
(keyedit_menu): Adapt the prompt asking to sign all user ids according
to OPT.ONLY_SIGN_TEXT_IDS.
* doc/gpg.texi: Document the new option --only-sign-text-ids.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1241
Debian-bug-id: 569702
* g10/gpg.c (check_user_ids): New function.
(main): Check that any user id specifications passed to --local-user
and --remote-user correspond to exactly 1 user. Check that any user
id specifications passed to --default-key correspond to at most 1
user. Warn if any user id specifications passed to --local-user or
--default-user are possible ambiguous (are not specified by long keyid
or fingerprint).
* g10/getkey.c (parse_def_secret_key): Don't warn about possible
ambiguous key descriptions here.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1128
Debian-debug-id: 544490
* g10/decrypt-data.c (decrypt_data): If OPT.UNWRAP_ENCRYPTION is set,
copy the data to the output file instead of continuing to process it.
* g10/gpg.c (enum cmd_and_opt_values): Add new value oUnwrap.
(opts): Handle oUnwrap.
(main): Likewise.
* g10/options.h (opt): Add field unwrap_encryption.
* g10/plaintext.c (handle_plaintext): Break the output file selection
functionality into ...
(get_output_file): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1060
Debian-bug-id: 282061
* g10/tofu.c (fingerprint_str): Die with the error code returned by
the failed function.
(time_ago_str): Ditto. Do not make a comma translatable.
(fingerprint_format): Use "%zu" for a size_t.
--
Also wrapped some long strings.
In general we should not use log_fatal or use xmalloc functions but
properly return an error code and use xtrymalloc like functions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (show_statistics): Also show when the most recently
signed message was observed.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Suggested-by: MFPA <2014-667rhzu3dc-lists-groups@riseup.net>
* g10/tofu.c (show_statistics): Break the time delta to string code
into...
(time_ago_str): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (fingerprint_pp): Split this function into...
(fingerprint_str): ... this function...
(fingerprint_format): ... and this function.
(record_binding): Store the unformatted fingerprint in the DB. Only
use the formatting fingerprint when displaying a message to the user.
(get_trust): Likewise.
(show_statistics): Likewise.
(tofu_register): Likewise.
(tofu_get_validity): Likewise.
(tofu_set_policy): Likewise.
(tofu_get_policy): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/import.c (transfer_secret_keys): Return GPG_ERR_NOT_PROCESSED
when stub_key_skipped.
(import_secret_one): Notify a user, suggesting --card-status.
--
Migration to 2.1 might be confusing with smartcard. With this patch,
a user can learn to run gpg ---card-status.
Thanks to intrigeri for the report.
Debian-bug-id: 795881
* g10/sqlite.c (sqlite3_stepx): When making sure that there is no
second SQL statement, ignore newlines.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* common/util.h (zb32_encode): Move prototype to ...
* common/zb32.h: new. Include this for all callers of zb32_encode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (validate_keys): If tdbio_update_version_record fails,
RC does not contain the error code. Save the error code in rc2 and
use that.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keydb.c (keydb_rebuild_caches): Only mark the cached as prepared
if it is actually prepared, which it only is if the resource is a
keybox.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/sqlite.h (enum sqlite_arg_type): Add SQLITE_ARG_BLOB.
(sqlite3_stepx_callback): New declaration.
(sqlite3_stepx): Change the callback's type to sqlite3_stepx_callback,
which passes an additional parameter, the sqlite3_stmt *. Update
users.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (sqlite3_exec_printf): Move from here...
* g10/sqlite.c (sqlite3_exec_printf): ... to this new file. Don't
mark as static.
* g10/tofu.c (sqlite3_stepx): Move from here...
* g10/sqlite.c (sqlite3_stepx): ... to this new file. Don't
mark as static.
* g10/tofu.c (enum sqlite_arg_type): Move from here...
* g10/sqlite.h (enum sqlite_arg_type): ... to this new file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/mainproc.c (check_sig_and_print): Do not call the informational
get_validity if we are not going to use it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/main.h: Add rejection_shown flag to each weakhash struct
* g10/misc.c (print_digest_algo_note, additional_weak_digest): Do not
treat MD5 separately; (print_digest_rejected_note): Use
weakhash.rejection_shown instead of static shown.
* g10/options.h (opt): Change from additional_weak_digests to
weak_digests.
* g10/sig-check.c: Do not treat MD5 separately.
* g10/gpg.c (main): Explicitly set MD5 as weak.
* g10/gpgv.c (main): Explicitly set MD5 as weak.
--
Previously, only one weak digest rejection message was shown, of
whichever was the first type encountered. This meant that if "gpg
--weak-digest SHA224" encountered both an MD5 digest and a SHA224
digest, it would only show the user that the MD5 digest was rejected.
In order to let the user know which algorithms were rejected, we
needed to move the "shown" flag into a per-weak-algorithm location.
Given this additional complication, it made no sense to continue to
treat MD5 specially, so it is added as a default weak algorithm in the
same opt.weak_digests data structure as any other.
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/tofu.c: Include <sched.h>.
(batch_update_started): New variable.
(begin_transaction): If we've been in batch mode for a while, then
commit any extant batch transactions.
(tofu_begin_batch_update): If we are not in batch mode, initialize
batch_update_started.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (struct db): Rename begin_transaction to savepoint_batch.
Rename end_transaction to savepoint_batch_commit. Update users.
Remove field rollback. Add fields savepoint_inner and
savepoint_inner_commit. Add field batch_update.
(dump_cache): New function.
(batch_update): New variable.
(begin_transaction). New function.
(end_transaction): New function.
(rollback_transaction): New function.
(tofu_begin_batch_update): New function.
(tofu_end_batch_update): New function.
(closedb): End any pending batch transaction.
(closedbs): Assert that none of the DBs have a started batch
transaction if we not in batch mode.
(record_binding): Use the begin_transaction, end_transaction and
rollback_transaction functions instead of including the SQL inline.
Also start a batch mode transaction if we are using the flat format.
(tofu_register): Use the begin_transaction, end_transaction and
rollback_transaction functions instead of including the SQL inline.
* g10/gpgv.c (tofu_begin_batch_update): New function.
(tofu_end_batch_update): New function.
* g10/test-stubs.c (tofu_begin_batch_update): New function.
(tofu_end_batch_update): New function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c: Include <stdarg.h>.
(prepares_saved) [DEBUG_TOFU_CACHE]: New variable.
(queries) [DEBUG_TOFU_CACHE]: New variable.
(struct db): Add fields prevp, begin_transaction, end_transaction,
rollback, record_binding_get_old_policy, record_binding_update,
record_binding_update2, get_policy_select_policy_and_conflict,
get_trust_bindings_with_this_email, get_trust_gather_other_user_ids,
get_trust_gather_other_keys, register_already_seen, and
register_insert.
[DEBUG_TOFU_CACHE]: Add field hits.
(STRINGIFY): New macro.
(STRINGIFY2): New macro.
(enum sqlite_arg_type): New enum.
(sqlite3_stepx): New function.
(combined_db): Remove variable.
(opendb): Don't cache the combined db.
(struct dbs): New struct. Update users to use this as the head of the
local DB list rather than overloading struct db.
(unlink_db): New function.
(link_db): New function.
(db_cache): New variable.
(db_cache_count): New variable.
(DB_CACHE_ENTRIES): Define.
(getdb): If the dbs specific cache doesn't include the DB, look at
DB_CACHE. Only if that also doesn't include the DB open the
corresponding DB.
(closedb): New function.
(opendbs): Don't open the combined DB. Just return an initialized
struct dbs.
(closedbs): Don't close the dbs specific dbs. Attach them to the
front of DB_CACHE. If DB_CACHE contains more than DB_CACHE_ENTRIES,
close enough dbs from the end of the DB_CACHE list such that DB_CACHE
only contains DB_CACHE_ENTRIES. Don't directly close the dbs, instead
use the new closedb function.
[DEBUG_TOFU_CACHE]: Print out some statistics.
(record_binding): Use sqlite3_stepx instead of sqlite3_exec or
sqlite3_exec_printf.
(get_policy): Likewise.
(get_trust): Likewise.
(tofu_register): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* common/srv.c: Merge into dirmngr/dns-stuff.c. Delete file.
* common/srv.h: Merge into dirmngr/dns-stuff.h. Delete file.
* common/Makefile.am (common_sources): Remove srv.c and srv.h.
* g10/keyserver.c: Do not include srv.h. The code using it is anyway
disabled.
* dirmngr/http.c: Remove header srv.h and stubs.
* dirmngr/t-dns-stuff.c: Add option --srv.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (init_trustdb): If the saved trust model is unknown,
default to tofu+pgp instead of pgp.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/trustdb.c (validate_one_keyblock): When checking trust regular
expressions, treat the tofu+pgp trust model the same as the pgp trust
model.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (get_trust): If the policy is auto or none, check if the
key is ultimately trusted. If so, return that.
(tofu_register): If the key is ultimately trusted, don't show any
statistics.
(tofu_get_validity): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Suggested-by: Andre Heinecke <aheinecke@intevation.de>
* g10/trustdb.c (init_trustdb): Recognize tofu and tofu+pgp as
possibly saved trust models. Also register the ultimately trusted
keys if the trust model is tofu or tofu+pgp.
(check_trustdb): Don't skip if the trust model is tofu or tofu+pgp.
(update_trustdb): Likewise.
(tdb_check_trustdb_stale): Likewise.
(validate_keys): If the trust model is TOFU, just write out the
ultimately trusted keys.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (initdb): Make the version check and the database
initialization atomic.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Co-authored-by: Andre Heinecke <aheinecke@intevation.de>
* configure.ac: Add option --dsiable-tofu and --disable-sqlite.
(NEED_SQLITE_VERSION): New var.
(USE_TOFU): New ac_define and am_conditional.
* autogen.sh (build-w32): Add PKG_CONFIG_LIBDIR to configure so that
pkg-config find the correct .pc file.
* g10/Makefile.am (tofu_source): New. Build only if enabled.
* g10/gpg.c (parse_trust_model)[!USE_TOFU]: Disable tofu models.
(parse_tofu_policy)[!USE_TOFU]: Disable all.
(parse_tofu_db_format)[!USE_TOFU]: Disable all.
(main) <aTOFUPolicy>[!USE_TOFU]: Skip.
* g10/keyedit.c (show_key_with_all_names_colon)[!USE_TOFU]: Do not
call tofu functions.
* g10/keylist.c (list_keyblock_colon)[!USE_TOFU]: Ditto.
* g10/trustdb.c (tdb_get_validity_core)[!USE_TOFU]: Skip tofu
processing.
--
This allows to build a minimal version of GnuPG. It is also currently
required to build for Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (signature_stats_collect_cb): If the time_ago column is
NULL, then both time_ago and count should be 0.
(get_trust): Reverse the direction of the join so that we also get
statistics about bindings without any signatures.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (get_trust): Use the right variable to display the
conflicting key.
--
Signed-off-by: Neal H. Walfield <neal@walfield.org>
Reported-by: Andre Heinecke <aheinecke@intevation.de>
* g10/revoke.c (gen_desig_revoke): Add additional parameter ctrl.
Check that the secret key is available. If not, display an error
message.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Regression-due-to: 8459bcf9
* g10/main.h: Improve function documentation.
* g10/packet.h.h: Improve function documentation.
* g10/sig-check.c: Improve function documentation and some comments.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/misc.c (print_md5_rejected_note): Rename to ..
(print_digest_rejected_note): this. Parameterize function to take an
enum gcry_md_algos.
* g10/sig-check.c: Use print_digest_rejected_note() when rejecting
signatures.
--
76afaed65e3b0ddfa4923cb577ada43217dd4b18 allowed extra --weak-digests,
but removed the one call to print_md5_rejected_note(). This replaces
and generalizes that warning.
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/options.h: Add additional_weak_digests linked list to opts.
* g10/main.h: Declare weakhash linked list struct and
additional_weak_digest() function to insert newly-declared weak
digests into opts.
* g10/misc.c: (additional_weak_digest): New function.
(print_digest_algo_note): Check for deprecated digests; use proper
gcry_md_algos type.
* g10/sig-check.c: (do_check): Reject weak digests in addition to MD5.
* g10/gpg.c: Add --weak-digest option to gpg.
* doc/gpg.texi: Document gpg --weak-digest option.
* g10/gpgv.c: Add --weak-digest option to gpgv.
* doc/gpgv.texi: Document gpgv --weak-digest option.
--
gpg and gpgv treat signatures made over MD5 as unreliable, unless the
user supplies --allow-weak-digests to gpg. Signatures over any other
digest are considered acceptable.
Despite SHA-1 being a mandatory-to-implement digest algorithm in RFC
4880, the collision-resistance of SHA-1 is weaker than anyone would
like it to be.
Some operators of high-value targets that depend on OpenPGP signatures
may wish to require their signers to use a stronger digest algorithm
than SHA1, even if the OpenPGP ecosystem at large cannot deprecate
SHA1 entirely today.
This changeset adds a new "--weak-digest DIGEST" option for both gpg
and gpgv, which makes it straightforward for anyone to treat any
signature or certification made over the specified digest as
unreliable.
This option can be supplied multiple times if the operator wishes to
deprecate multiple digest algorithms, and will be ignored completely
if the operator supplies --allow-weak-digests (as before).
MD5 is still always considered weak, regardless of any further
--weak-digest options supplied.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Capitialized some comments, shorted a line in do_check, and changed
subject to name the option. -wk
* g10/tofu.c (get_trust): If a conflict occurs when MAY_ASK is false,
set conflict to the key. When prompting the user, don't show the
conflicting key if the conflicting key is the current key.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/trustdb.c (tdb_get_validity_core): Silence a warning.
* g10/tofu.c (tofu_register): Move SIG_DIGEST computation to the top
so that it is not uninitialized in case of an early error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Check for sqlite3.
(SQLITE3_CFLAGS): AC_SUBST it.
(SQLITE3_LIBS): Likewise.
* g10/Makefile.am (AM_CFLAGS): Add $(SQLITE3_CFLAGS).
(gpg2_SOURCES): Add tofu.h and tofu.c.
(gpg2_LDADD): Add $(SQLITE3_LIBS).
* g10/tofu.c: New file.
* g10/tofu.h: New file.
* g10/options.h (trust_model): Define TM_TOFU and TM_TOFU_PGP.
(tofu_db_format): Define.
* g10/packet.h (PKT_signature): Add fields digest and digest_len.
* g10/gpg.c: Include "tofu.h".
(cmd_and_opt_values): Declare aTOFUPolicy, oTOFUDefaultPolicy,
oTOFUDBFormat.
(opts): Add them.
(parse_trust_model): Recognize the tofu and tofu+pgp trust models.
(parse_tofu_policy): New function.
(parse_tofu_db_format): New function.
(main): Initialize opt.tofu_default_policy and opt.tofu_db_format.
Handle aTOFUPolicy, oTOFUDefaultPolicy and oTOFUDBFormat.
* g10/mainproc.c (do_check_sig): If the signature is good, copy the
hash to SIG->DIGEST and set SIG->DIGEST_LEN appropriately.
* g10/trustdb.h (get_validity): Add arguments sig and may_ask. Update
callers.
(tdb_get_validity_core): Add arguments sig and may_ask. Update
callers.
* g10/trust.c (get_validity) Add arguments sig and may_ask. Pass them
to tdb_get_validity_core.
* g10/trustdb.c: Include "tofu.h".
(trust_model_string): Handle TM_TOFU and TM_TOFU_PGP.
(tdb_get_validity_core): Add arguments sig and may_ask. If
OPT.TRUST_MODEL is TM_TOFU or TM_TOFU_PGP, compute the TOFU trust
level. Combine it with the computed PGP trust level, if appropriate.
* g10/keyedit.c: Include "tofu.h".
(show_key_with_all_names_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/keylist.c: Include "tofu.h".
(public_key_list): Also show the PGP stats if the trust model is
TM_TOFU_PGP.
(list_keyblock_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/pkclist.c: Include "tofu.h".
* g10/gpgv.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* g10/test-stubs.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* doc/DETAILS: Describe the TOFU Policy field.
* doc/gpg.texi: Document --tofu-set-policy, --trust-model=tofu,
--trust-model=tofu+pgp, --tofu-default-policy and --tofu-db-format.
* tests/openpgp/Makefile.am (TESTS): Add tofu.test.
(TEST_FILES): Add tofu-keys.asc, tofu-keys-secret.asc,
tofu-2183839A-1.txt, tofu-BC15C85A-1.txt and tofu-EE37CF96-1.txt.
(CLEANFILES): Add tofu.db.
(clean-local): Add tofu.d.
* tests/openpgp/tofu.test: New file.
* tests/openpgp/tofu-2183839A-1.txt: New file.
* tests/openpgp/tofu-BC15C85A-1.txt: New file.
* tests/openpgp/tofu-EE37CF96-1.txt: New file.
* tests/openpgp/tofu-keys.asc: New file.
* tests/openpgp/tofu-keys-secret.asc: New file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/encrypt.c (use_mdc): Make it a global func.
* g10/sign.c (sign_symencrypt_file): Use that function to decide
whether to use an MDC.
* tests/openpgp/conventional-mdc.test: Add a simple test case.
--
We used --force-mdc in sign+symenc mode (-cs) only with --force-mdc.
That broke our assumption from commit 625e292 (GnuPG 2.1.9) that all
uses of modern ciphers are using MDC.
Reported-by: Ben Kibbey <bjk@luxsci.net>
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Add field "print_dane_records".
* g10/gpg.c (oPrintDANERecords): new.
(opts): Add --print-dane-records.
(main): Set that option.
* g10/export.c (do_export): Remove EXPORT_DANE_FORMAT handling.
(do_export_stream): Add EXPORT_DANE_FORMAT handling.
* g10/keylist.c (list_keyblock_pka): Implement DANE record printing.
* g10/gpgv.c (export_pubkey_buffer): New stub.
* g10/test-stubs.c (export_pubkey_buffer): New stub.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (parse_rereadable_options): Do tilde expansion and
check for cert file existance in option --hkp-cacert.
--
GnuPG-bug-id: 2120
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Fail for modern messages w/o MDC.
--
This change turns the missing MDC warning into an error if the message
has been encrypted using a cipher with a non-64 bit block length cipher
and it is not Twofish.
We can assume that such messages are created by code which should have
been able to create MDC packets. AES was introduced with 1.0.3 on
2000-09-18 shortly after MDC (1.0.2 on 2000-07-12). We need to
exclude Twofish because that might have been used before MDC.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/dirmngr-conf.skel: New.
* g10/Makefile.am (EXTRA_DIST): Add file.
(install-data-local, uninstall-local): Install that file.
* g10/openfile.c (copy_options_file): Add arg "name", return a value,
simplify with xstrconcat, and factor warning message out to:
(try_make_homedir): here. Also install dirmngr.conf.
* g10/options.skel: Remove --keyserver entry.
--
The option --keyserver in gpg has been deprecated in favor of
--keyserver in dirmngr.conf. Thus we need to install a skeleton file
for dirmngr to set a default keyserver.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_refresh): Change return type to
gpg_error_t. Use gpg_dirmngr_ks_list to print the name of the
keyserver to use.
(keyserver_search): Do not print the "no keyserver" error
message. The same error is anyway returned from dirmngr.
* g10/call-dirmngr.c (ks_status_parm_s): Add field "keyword".
(ks_status_cb): Handle other status keywords.
(gpg_dirmngr_ks_list): New.
* tools/gpgconf-comp.c (gc_options_gpg): Deprecate "keyserver".
(gc_options_dirmngr): Add "Keyserver" group and "keyserver".
--
Along with the corresponding dirmngr change this option allows to
configure the keyserver only in dirmngr.conf. Existing
configurations will continue to work. However, GUIs using gpgconf
now the keyserver option under the dirmngr (aka Key Acquirer) tab
unless they are in export mode in which the keyserver option is also
show for gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (print_and_check_one_sig): Add arg "extended" and
print an asterisk for the chosen selfsig.
(check_all_keysigs): Add arg "only_selfsig"
(keyedit_menu) <cmdCHECK>: Add optional arg "selfsig".
--
Using "check selfsig" prints only the self-signatures and indicates
the chosen selfsig with an asterisk.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sig-check.c (signature_check2): Avoid copying PK to RET_PK.
Instead, directly use the provided storage. If none is provided
allocate some.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/sign.c (do_sign): Let verify signature by gpg-agent.
* agent/pksign.c (agent_pksign_do): Call gcry_pk_verify for RSA.
--
RSA signature verification should be done to prevent attacks against
RSA CRT implementations and not to return invalid signature to
adversary. Newer libgcrypt does so. For older libgcrypt and
smartcards, gpg-agent does signature verification.
* g10/call-dirmngr.c (create_context): Send option and print a verbose
error.
--
It is in general a bad idea to use honor-keyserver-url but if Dirmngr
is running in TOR mode we should not allow this option at all. We let
Dirmngr know about the use of this option and let Dirmngr tell use
whether TOR mode is active so that we can print a hint to disable that
keyserver option.
A future extension in gpgconf may disable that option directly but a
user may still override that and thus we better check.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (search_skipfnc): Fix dummy argument
--
This is required due to the prototype change in
commit 9acbeac23668a1d0dabca27d7825430d76e095c2
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (keyedit_menu): When complaining that a user ID or key
must be selected, indicate what command to use to do this.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (merge_selfsigs_main): Stop looking for self-signed
data belonging to the public key when we encounter an attribute packet
or a subkey packet, not just a user id packet. When looking for
self-signed data belonging to a user id packet, stop when we see a
user attribute packet.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (skip_unusable): Also mark the key as unusable if it
has been revoked or has expired.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c: Improve documentation and comments for most
functions. Move documentation for public functions from here...
* g10/keydb.h: ... to here.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (have_secret_key_with_kid): Once we find the relevent
key or subkey, stop searching.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Only a single key or subkey will ever be selected per keyblock.
* g10/getkey.c (lookup): Also don't skip legacy keys if the search
mode is KEYDB_SEARCH_MODE_NEXT.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
We currently don't skip keys if the search mode is
KEYDB_SEARCH_MODE_FIRST. Since we change KEYDB_SEARCH_MODE_FIRST to
KEYDB_SEARCH_MODE_NEXT (to avoid a reset), it only makes sense to have
the same semantics for KEYDB_SEARCH_MODE_NEXT.
* g10/keydb.h (get_seckey_byname): Rename from this...
(get_seckey_default): ... to this. Drop the parameter name. Update
users.
* g10/getkey.c (get_seckey_byname): Rename from this...
(get_seckey_default): ... to this. Drop the parameter name. Drop the
code which assumed that NAME is not NULL.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.h (get_keyblock_byfprint): Remove prototype. Replace use
of this function with get_pubkey_byfprint.
* g10/getkey.c (get_pubkey_byname): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (get_pubkey_byname): If R_KEYBLOCK is not NULL, return
the keyblock in R_KEYBLOCK independent of whether PK is set or not.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Currently, no caller invokes get_pubkey_byname with PK==NULL and
R_KEYBLOCK != NULL. Thus, this change does not change any behavior.
* g10/getkey.c (get_pubkey_byname): Remove function.
(lookup): Replace use of get_pubkey_byname by get_pubkey_byfprint.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.h (get_pubkey_end): Remove declaration. Replace use of
function with getkey_end.
* g10/getkey.c (get_pubkey_byname): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* kbx/keybox-search-desc.h (struct keydb_search_desc.skipfnc): Change
third parameter to be the index of the user id packet in the keyblock
rather than the packet itself. Update users.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
The keybox code doesn't work directly with keyblocks. As such, the
matched user packet is not readily available to pass to
DESC[n].SKIPFNC. But, we do know the index of the user id packet that
matched. Thus, pass that instead. If the skip function needs the
user id packet, it can use the key id to look up the key block and
find the appropriate packet.
* g10/getkey.c (struct getkey_ctx_s): Remove field found_key.
(lookup): Add argument ret_found_key. If not NULL, set it to the
found key. Update callers.
(pk_from_block): Add argument found_key. Use it instead of
CTX->FOUND_KEY. Update callers.
(finish_lookup): Return a KBNODE (the found key) instead of an int.
Don't set CTX->FOUND_KEY. Return the found key instead.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (struct getkey_ctx_s): Remove field keyblock.
(finish_lookup): Add parameter keyblock. Update caller to pass this.
(lookup): Add new local variable keyblock. Use this instead of
ctx->keyblock for referencing the keyblock.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/test.c: Include string.h.
(prepend_srcdir): New. Taken from Libgcrypt.
(test_free): New.
* g10/t-keydb.c (do_test): Malloc the filename.
* g10/Makefile.am (AM_CPPFLAGS): Remove -DSOURCE_DIR
(EXTRA_DIST): Add t-keydb-keyring.kbx.
--
Using SOURCE_DIR should in general work but we have seen problems when
doing this in Libgcrypt. Using the srcdir variable gives us anyway
more flexibility and aligns with the way we do it in tests/openpgp.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/test.c: Include stdio.h and stdlib.h.
(verbose): New.
(print_results): Rename to exit_tests.
(main): Remove atexit and call exit_tests. Set verbose.
(ASSERT, ABORT): Call exit_tests instead of exit.
--
Calling exit from an exit handler is undefined behaviour. It works on
Linux but other systems will hit an endless loop. That is indeed
unfortunate but we can't do anything about it. Calling _exit() would
be possible but that may lead to other problems. Thus we change to
call a custom exit function :-(.
Using "make check verbose=1" is supported by tests/openpgp and thus
we add the same mechanism here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keyblock_cache): Don't declare this variable. Instead...
(struct keyblock_cache): ... turn its type into this first class
object...
(struct keydb_handle): ... and instantiate it once per database
handle. Update all users.
(keydb_rebuild_caches): Don't invalidate the keyblock cache.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (keydb_get_keyblock): If the iobuf_seek fails when
reading from the cache, then simply clear the cache and try reading
from the database.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/gpg.c (opts): Remove --no-sig-create-check.
* g10/options.h (struct opt): Remove field no_sig_create_check.
* g10/sign.c (do_sign): Always check unless it is RSA and we are using
Libgcrypt 1.7.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_new): If we fail to open a keyring or keybox
correctly release all resources.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c: Improve code comments and documentation of internal
interfaces. Improve documentation of public APIs and move that to...
* g10/keydb.h: ... this file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (struct keydb_handle): Add new field is_reset.
(keydb_new): Initialize hd->is_reset to 1.
(keydb_locate_writable): Set hd->is_reset to 1.
(keydb_search): Set hd->is_reset to 0. Don't cache a key not found if
the search started from the beginning of the database.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (keydb_search_first): Reset the handle before starting
the search.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
This bug hasn't shown up yet in practice, because keydb_search_first
is always called immediately after a keydb_new. This changes cleans
up the semantics and will hopefully prevent future bugs.
* g10/keydb.c (struct kid_list_s): Rename from this...
(struct kid_not_found_cache_bucket): ... to this. Update users.
Remove field state.
(kid_list_t): Remove type.
(KID_NOT_FOUND_CACHE_BUCKETS): Define. Use this instead of a literal.
(kid_found_table): Rename from this...
(kid_not_found_cache_bucket): ... to this. Update users.
(kid_found_table_count): Rename from this...
(kid_not_found_cache_count): ... to this. Update users.
(kid_not_found_p): Only return whether a key with the specified key id
is definitely not in the database.
(kid_not_found_insert): Remove parameter found. Update callers.
(keydb_search): Only insert a key id in the not found cache if it is
not found. Rename local variable once_found to already_in_cache.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Commit e0873a33 started tracking whether key ids where definitely in
the database. This information is, however, never used and thus just
unnecessarily inflates the cache. This patch effectively reverts that
change (however, e0873a33 contains two separate changes and this only
reverts that change).
* g10/keyedit.c (sign_uids): Write an ERROR status for a signing
failure.
(menu_adduid, menu_addrevoker, menu_revsig): Ditto.
(menu_revuid, menu_revkey, menu_revsubkey): Ditto.
--
This change helps GPA to show better error messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_FAILURE): New.
* g10/cpr.c (write_status_failure): New.
* g10/gpg.c (main): Call write_status_failure for all commands which
print an error message here.
* g10/call-agent.c (start_agent): Print an STATUS_ERROR if we can't
set the pinentry mode.
--
This status line can be used similar to the error code returned by
commands send over the Assuan interface in gpgsm. We don't emit them
in gpgsm because there we already have that Assuan interface to return
proper error code. This change helps GPGME to return better error
codes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse): Use an int to compare to -1. Use
buf32_to_ulong.
--
Regression-due-to: 0add91ae1ca3718e8140af09294c595f47c958d3
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_signature): Change revkey's type from a struct
revocation_key ** to a struct revocation_key *. Update users.
--
revkey was a pointer into the raw data. But, C doesn't guarantee that
there is no padding. Thus, we copy the data.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse): We don't handle copying packets with a
partial body length to an output stream. If this occurs, log an error
and abort.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (dbg_copy_all_packets): Check that OUT is not
NULL.
(copy_all_packets): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse_signature): Make sure PKTLEN doesn't
underflow. Be more careful that a read doesn't read more data than
PKTLEN says is available.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/packet.h: Add documentation for functions defined in
parse-packet.c.
* g10/parse-packet.c: Improve comments for many functions.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/packet.h (enum_sig_subpkt): Remove argument RET_N. Update
callers.
* g10/parse-packet.c (enum_sig_subpkt): Remove argument RET_N.
--
Remove the RET_N argument, because it is unused and because it is
meaningless: it's not clear whether it is an offset into SIG->HASHED
or SIG->UNHASHED.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (mpi_read): Improve documentation. Correctly
handle an EOF. On overflow, correctly return the number of bytes read
from the pipeline.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (iobuf_open_fd_or_name): Remove prototype. Replace
use with either iobuf_open or iobuf_fdopen_nc, as appropriate.
* common/iobuf.c (iobuf_open): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* kbx/keybox.h (KEYBOX_WITH_X509): Do not define.
* sm/Makefile.am (AM_CPPFLAGS): Define it here.
(common_libs): Change to libkeybox509.a
* g10/Makefile.am (AM_CFLAGS): remove KSBA_CFLAGS.
(gpg2_LDADD, gpgv2_LDADD): Remove KSBA_LIBS
* kbx/Makefile.am (noinst_LIBRARIES): Add libkeybox509.a.
(libkeybox509_a_SOURCES): New.
(libkeybox_a_CFLAGS): New.
(libkeybox509_a_CFLAGS): New.
(kbxutil_CFLAGS): New.
* kbx/keybox-search.c (has_keygrip) [!KEYBOX_WITH_X509]: Declare args
as unused.
--
There is no real need to link to Libksba in gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (INQUIRE_MAXLEN): New.
* g10/call-agent.c (default_inquire_cb): Send STATUS_INQUIRE_MAXLEN.
client when inquiring a passphrase over pinentry-loopback.
--
This is to inform a user about the maximum length of a passphrase. The
limit is the same that gpg-agent uses.
* g10/gpg.c (main): test for --command-fd during --gen-key parse.
When --command-fd is set then imply --batch to let gpg inquire a
passphrase rather than requiring a pinentry.
* g10/keydb.h (KEYDB_RESOURCE_FLAG_GPGVDEF): New.
* g10/keydb.c (keydb_add_resource): Take care of new flag.
* g10/gpgv.c (main): Use new flag.
--
GnuPG-bug-id: 2025
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (list_keyblock_print): Do not print extra curve name.
--
This was cruft from the time before we changed to the new algo/size
string.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (list_keyblock_print): Change UID line indentation
* g10/mainproc.c (list_node): Ditto.
--
Due to the new keyalgo/size format the UID was not anymore printed
properly aligned to the creation date. Although we can't do that in
any case, this change does it for common algos like "rsa2048",
"dsa2048", and "ed25519".
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cvt-openpgp.c (get_keygrip): Handle Curve25519.
(convert_secret_key, convert_transfer_key): Ditto.
* common/openpgp-oid.c (oidtable): Add Curve25519.
(oid_crv25519, openpgp_oid_is_crv25519): New.
* common/util.h (openpgp_oid_is_crv25519): New.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Handle the case
with Montgomery curve which uses x-only coordinate.
* g10/keygen.c (gen_ecc): Handle Curve25519.
(ask_curve): Change the API and second arg is to return subkey algo.
(generate_keypair, generate_subkeypair): Follow chage of ask_curve.
* g10/keyid.c (keygrip_from_pk): Handle Curve25519.
* g10/pkglue.c (pk_encrypt): Handle Curve25519.
* g10/pubkey-enc.c (get_it): Handle the case with Montgomery curve.
* scd/app-openpgp.c (ECC_FLAG_DJB_TWEAK): New.
(send_key_attr): Work with general ECC, Ed25519, and Curve25519.
(get_public_key): Likewise.
(ecc_writekey): Handle flag_djb_tweak.
--
When libgcrypt has Curve25519, GnuPG now supports Curve25519.
* common/openpgp-oid.c (openpgp_oid_to_curve): Add CANON argument.
* common/util.h: Update.
* g10/import.c (transfer_secret_keys): Follow the change.
* g10/keyid.c (pubkey_string): Likewise.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Likewise.
* parse-packet.c (parse_key): Likewise.
* scd/app-openpgp.c (send_key_attr, get_public_key): Likewise.
--
Change the function so that caller can select canonical name of curve
or name for printing. Suggested by wk.
* g10/keydb.c (keydb_search_fpr): Skip legacy keys.
--
A test case for this problem can be found at
GnuPG-bug-id: 2031
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (lookup): Map GPG_ERR_LEGACY_KEY.
--
If an expired key is directly followed by a legacy key in the keyring,
the lookup function incorrectly returned "legacy key" instead of
"unusable key". We fix it by handling not found identical to a legacy
key if the last finish lookup failed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (sign_uids): Add arg "ctrl".
(show_key_with_all_names_colon): Ditto.
(show_key_with_all_names): Ditto.
* g10/keyedit.c (show_key_with_all_names): Print key record
indicators by checking with gpg-agent.
(show_key_with_all_names): Ditto. May now also print sec/sbb.
--
This also fixes a problem in the --with-colons mode. Before this
patch the --with-colons output of --edit-key always showed pub/sub
regardless of the old toogle state. Now it also prints sec/sbb.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (cmds): Remove helptext from "toggle".
(keyedit_menu): Remove "toggle" var and remove the sub/pub check
against toggle.
--
Because it is now easily possible to have only secret keys for some of
the main/subkeys the current check on whether any secret is available
is not really useful. A finer grained check should eventually be
implemented.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
* g10/call-agent.h (struct agent_card_info_s): Add curve field.
* g10/call-agent.c (learn_status_cb): Use curve name.
* g10/card-util.c (card_status): Show pubkey name.
* scd/app-openpgp.c (struct app_local_s): Record OID and flags.
(store_fpr): Use ALGO instead of key type.
(send_key_attr): Use curve name instead of OID.
(get_public_key): Clean up by OID to curve name.
(ecc_writekey): Support any curves in libgcrypt.
(do_genkey, do_auth, ): Follow the change.
(ecc_oid): New.
(parse_algorithm_attribute): Show OID here.
* g10/card-util.c (do_change_keysize): Put "rsa".
* scd/app-openpgp.c (change_keyattr, change_keyattr_from_string):
Change the command format.
(rsa_writekey): Check key type.
(do_writekey): Remove "ecdh" and "ecdsa" support which was available
in experimental libgcrypt before 1.6.0.
* g10/getkey.c (free_akl): If AKL is NULL, just return.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Reported-by: Sami Farin.
GnuPG-bug-id: 2045
* agent/gpg-agent.c (create_server_socket): Add arg "cygwin". Call
assuan_sock_set_flag if Assuan version is recent enough.
(main): Create ssh server socket with Cygwin flag set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse): Make the description more accurate when
listing packets: old format packets don't support partial lengths,
only indeterminate lengths (RFC 4880, Section 4.2).
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (opts): Change arg for oDebug to a string.
(debug_flags): New; factored out from set_debug.
(set_debug): Remove "--debug-level help". Use parse_debug_flag to
print the used flags.
(main): Use parse_debug_flag for oDebug.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (kid_list_s): Keep a state in the table.
(kid_not_found_table): Rename to kid_found_table.
(n_kid_not_found_table): Rename to kid_found_table_count.
(kid_not_found_p): Return found state.
(kid_not_found_insert): Add arg found.
(keydb_search): Store found state in the table.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (keylist_context): Add field good_sigs.
(list_keyblock_print): Updated good_sigs.
(print_signature_stats): Print number of good signatures and use
log_info instead of tty_printf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (kid_list_t): New.
(kid_not_found_table, n_kid_not_found_table): New.
(kid_not_found_p, kid_not_found_insert, kid_not_found_flush): New.
(keydb_insert_keyblock): Flush the new cache.
(keydb_delete_keyblock): Ditto.
(keydb_update_keyblock): Ditto.
(keydb_search): Use the new cache.
(keydb_dump_stats): New.
* g10/gpg.c (g10_exit): Dump keydb stats.
--
What we do here is to keep track of key searches by long keyids (as
stored in all signatures) so that we do not need to scan the keybox
again after we already found that this keyid will result in
not-found. As soon as we change gpg to run as a co-process we should
store this table per session because other instances of gpg may have
updated the keybox without us knowing.
On a test ring with
gpg: 94721 good signatures
gpg: 6831 bad signatures
gpg: 150703 signatures not checked due to missing keys
gpg: 5 signatures not checked due to errors
gpg: keydb: kid_not_found_table: total: 14132
this new cache speeds a --check-sigs listing up from 28 minutes to
less than 3 minutes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tdbio.c (tdbio_read_record): Fix returning of the error.
--
Actually the returned error will anyway be GPG_ERR_TRUSTDB but the old
code was not correct.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tdbdump.c (list_trustdb): Add arg FP and change callers to pass
es_stdout.
* g10/tdbio.c (upd_hashtable): On a corrupted trustdb call
list_trustdb only in verbose > 1 mode and let it dump to stderr.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/signal.c: Remove.
* g10/main.h: Remove old function API.
* g10/tdbio.c: Use new API, even in the dead code.
--
We use common/signal.c now. The file g10/signal.c has been useless
since 2003-06-27. Now, the removal.
* Makefile.am: Always build kbx/
* g10/Makefile.am (AM_CFLAGS): Include KSBA_CFLAGS.
--
Note that "make check" still prints a warning.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (validate_keys): Call dump_key_array only in debug
mode.
--
I guess that is a left-over from an early attempt to output
information on the trustdb for use by other tools. Maybe related to
the former --list-trust-path command. Sending it to stdout is
probably useful so we do this now only in debug mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_gpg_control): Replace puts by es_fputs to
LISTFP.
--
Reported-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
This was an oversight from the conversion to estream or a separate
listing stream.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_handle): Add field saved_found.
(keydb_new): Init new field.
(keydb_push_found_state, keydb_pop_found_state): New.
* g10/keyring.c (kyring_handle): Add field saved_found.
(keyring_push_found_state, keyring_pop_found_state): New.
--
We have the same feature in gpgsm. It is very useful to check for an
unambiguous user id with a follow up update of the keyblock.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (fix_keyblock): Rename to fix_key_signature_order.
(fix_keyblock): New. Call fix_key_signature_order and other fix
functions.
(keyedit_menu): Factor code out to new fix_keyblock.
(keyedit_quick_sign): Ditto. Check for primary fpr before calling
fix_keyblock.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (print_pubkey_info): Print either "pub" or "sub".
* g10/getkey.c (get_pubkey_byfprint): Add optional arg R_KEYBLOCK.
* g10/keyid.c (keyid_from_fingerprint): Adjust for change.
* g10/revoke.c (gen_desig_revoke): Adjust for change.
* g10/card-util.c (card_status): Simplify by using new arg. Align
card-no string.
* g10/card-util.c (card_status): Remove not used GnuPG-1 code.
--
This now prints "sub" if the first used card key is actually a subkey.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (keyinfo_status_cb): Detect KEYINFO.
--
This regression is due to
commit 585d5c62eece23911a768d97d11f159be138b13d
from February 2013!
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/free-packet.c (cmp_public_keys): Compare opaque
data at the first entry of the array when it's unknown algo.
--
(forwardported from 2.0 commit 43429c7869152f301157e4b24790b3801dce0f0a)
GnuPG-bug-id: 1962
* common/logging.h: Rename JNLIB_LOG_* to GPGRT_LOG_*.
* common/mischelp.h: Rename JNLIB_GCC_* to GPGRT_GCC_*.
--
JNLIB has no more meaning. Thus we switch to a GPGRT_ prefix in
anticipation that some code may eventually be moved to libgpg-error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/dns-cert.h: Move to ../dirmngr/.
* common/dns-cert.c: Move to ../dirmngr/. Change args to return the
key as a buffer.
* common/t-dns-cert.c: Move to ../dirmngr/.
* common/pka.c, common/pka.h, common/t-pka.c: Remove.
* dirmngr/server.c (data_line_cookie_write): Factor code out to
data_line_write and make it a wrapper for that.
(data_line_write): New.
(cmd_dns_cert): New.
(register_commands): Register new command.
* g10/Makefile.am (LDADD): Remove DNSLIBS.
* g10/call-dirmngr.c (dns_cert_parm_s): New.
(dns_cert_data_cb, dns_cert_status_cb): New.
(gpg_dirmngr_dns_cert): New.
(gpg_dirmngr_get_pka): New.
* g10/gpgv.c (gpg_dirmngr_get_pka): New dummy function.
* g10/keyserver.c (keyserver_import_cert): Replace get_dns_cert by
gpg_dirmngr_dns_cert.
(keyserver_import_pka): Replace get_pka_info by gpg_dirmngr_get_pka.
* g10/mainproc.c: Include call-dirmngr.h.
(pka_uri_from_sig): Add CTX arg. Replace get_pka_info by
gpg_dirmngr_get_pka.
--
With this patch gpg does not do any network access itself but uses
dirmngr for that. Note that we need to keep linking to NETLIBS due to
the logging code and because we need TCP for our socket emulation
under Windows. Probably also required for Solaris etc.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-dirmngr.c (dirmngr_local_s): Add field set_keyservers_done.
(create_context): Move keyserver setting to ...
(open_context): here.
(clear_context_flags): New.
(gpg_dirmngr_ks_get): Add arg override_keyserver.
* g10/keyserver.c (keyserver_refresh): Improve diagnostics.
(keyserver_get_chunk): Ditto. Pass OVERRIDE_KEYSERVER to ks_get.
--
It used to ignore the given server but showed a diagnostics that it
will be used.
* g10/options.h (KEYSERVER_HTTP_PROXY): New.
(KEYSERVER_USE_TEMP_FILES, KEYSERVER_KEEP_TEMP_FILES): Remove.
(KEYSERVER_TIMEOUT): New.
* common/keyserver.h (KEYSERVER_TIMEOUT): Remove.
* g10/keyserver.c (keyserver_opts): Remove obsolete "use-temp-files"
and "keep-temp-files". Add "http-proxy" and "timeout".
(parse_keyserver_options): Remove 1.2 compatibility option
"honor-http_proxy". Remove "use-temp-files" and "keep-temp-files"
code.
--
Note that many of these options where implicitly used by passing any
unknown option down to the former keyserver helpers. The don't exist
anymore thus we need to make them explicit. Another patch will convey
them to dirmngr. Temp files are not anymore used thus they can be
removed and will be ignored when used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/free-packet.c (my_mpi_copy): New.
(copy_public_key, copy_signature): Use instead of mpi_copy.
--
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (struct sig_stats): Rename to keylist_context and add
field check_sigs.
(keylist_context_release): New.
(list_all): Set listctx.check_sigs and call release func.
(list_one): Ditto.
(locate_one): Ditto.
(list_keyblock_print): Use .check_sigs field. Repalce arg opaque by
listctx.
(list_keyblock): Ditto. Make static.
(list_keyblock_direct): New.
* g10/keygen.c (do_generate_keypair): Replace list_keyblock by
list_keyblock_direct.
--
This is in preparation for the server mode and for a patch to speed up
--list-sigs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oDebugIOLBF): new.
(opts): Add --debug-iolbf.
(main): Set option.
--
This option is convenient for debugging to make sure that debug output
to stderr is synced with output to stdout.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (DBG_LOOKUP_VALUE): Change to 8192.
* g10/options.h (DBG_LOOKUP_VALUE, DBG_LOOKUP): New.
* g10/getkey.c: Use DBG_LOOKUP instead of DBG_CACHE at most places.
* g10/parse-packet.c (parse_key): Check PKTLEN before calling mpi_read
et al.
--
Due to the missing length checks PKTLEN may turn negative. Because
PKTLEN is an unsigned int the malloc in read_rest would try to malloc
a too large number and terminate the process with "error reading rest
of packet: Cannot allocate memory".
Reported-by: Hanno Böck.
Signed-off-by: Werner Koch <wk@gnupg.org>
g10/call-agent.h (agent_scd_learn): Add FORCE option.
g10/call-agent.c (agent_scd_learn): Implement FORCE option.
g10/keygen.c (gen_card_key): Follow the change of option.
g10/card-util.c (change_pin, card_status, factory_reset): Likewise.
g10/keyedit.c (keyedit_menu): Update private key storage by
agent_scd_learn.
--
This is not a perfect solution since there is a possibility user
unplug card before quitting 'gpg --keyedit' session. Usually,
it works well.
GnuPG-bug-id: 1846
* g10/call-dirmngr.c (record_output): New function.
(ks_put_inq_cb): Use it here to generate a --with-colons like output
instead of a custom format.
* dirmngr/ks-action.c: Include "ldap-parse-uri.h".
(ks_action_help): If the provided URI is an LDAP URI, then use
ldap_parse_uri to parse. Call ks_ldap_help.
(ks_action_search): If passed an LDAP URI, then call ks_ldap_search.
(ks_action_get): Likewise.
(ks_action_put): Likewise. Also, change data from a 'const void *' to
a 'void *' and add info and infolen parameters. Add note that
function may modify DATA.
* dirmngr/ks-action.h (ks_action_put): Update declaration accordingly.
* dirmngr/server.c: Include "ldap-parse-uri.h".
(cmd_keyserver): If ITEM->URI is an LDAP URI, parse it using
ldap_parse_uri.
(hlp_ks_put): Improve documentation.
(cmd_ks_put): Also pass info and infolen to ks_action_put. Improve
documentation.
* dirmngr/ks-engine.h (ks_ldap_help): New declaration.
(ks_ldap_search): Likewise.
(ks_ldap_get): Likewise.
(ks_ldap_put): Likewise.
* dirmngr/ks-engine-ldap.c: New file.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add ks-engine-ldap.c,
ldap-parse-uri.c and ldap-parse-uri.h.
(dirmngr_LDADD) [USE_LDAP]: Add $(ldaplibs).
--
Signed-off-by: Neal H. Walfield <neal@g10code.de>
* g10/mainproc.c (check_sig_and_print): Emit STATUS_NEWSIG.
--
gpgsm does this for a long time but somehow it never made it into gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (gpg_mpi_write): Strip leading zeroes.
--
This used not to work with opaque MPI as returned by Libgcrypt from
ECC operations. This patch fixes this.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (set_packet_list_mode): Set mpi_print_mode.
* g10/misc.c (mpi_print): Do not print an extra leading zero.
--
This was in older versions possible using "--debug 4" but that was
disabled in 2.1 due to a conflict using this values also for
Libgcrypt. Now the values are dumped either with --debug 4 or using
--list-packets along with --verbose.
Because OpenPGP only uses unsigned integers an extra leading zero will
not be printed anymore.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aPrintPKARecords): Rename to oPrintPKARecords and do not
use it as a command.
* g10/keylist.c (list_keyblock): List PKA rceords also for secret
keys.
--
An option allows to use it more flexible. For example to select only
secret keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (tdb_check_trustdb_stale): avoid log_info() when
opt.quiet
--
gpg(1) says:
-q, --quiet
Try to be as quiet as possible.
While the mentions about the stale trustdb information are edifying,
they aren't necessary, and shouldn't be emitted when the user requests
--quiet.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/dns-cert.c (get_dns_cert): Make r_key optional.
* common/pka.c: Rewrite for the new hash based lookup.
* common/t-pka.c: New.
* configure.ac: Remove option --disable-dns-pka.
(USE_DNS_PKA): Remove ac_define.
* g10/getkey.c (parse_auto_key_locate): Always include PKA.
--
Note that although PKA is now always build, it will only work if
support for looking up via DNS has not been disabled.
The new PKA only works with the IPGP DNS certtype and shall be used
only to retrieve the fingerprint and optional the key for the first
time. Due to the security problems with DNSSEC the former assumption
to validate the key using DNSSEC is not anymore justified. Instead an
additional layer (e.g. Trust-On-First-Use) needs to be implemented to
track change to the key. Having a solid way of getting a key matching
a mail address is however a must have.
More work needs to go into a redefinition of the --verify-options
pka-lookups and pka-trust-increase. The auto-key-locate mechanism
should also be able to continue key fetching with another methods once
the fingerprint has been retrieved with PKA.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/dns-cert.c (get_dns_cert): Add arg want_certtype. Change all
callers.
(CERTTYPE_): Move constants to ...
* common/dns-cert.h: here as DNS_CERTTYPE_.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mailbox.c: Move to ...
* common/mbox-util.c: new file.
* common/mbox-util.h: New. Include where needed.
* g10/t-mailbox.c: Move to ...
* common/t-mbox-util.c: new file.
--
This will make it easier to use the code by other modules in common/.
* g10/gpg.c (main): Add command --print-pka-records.
* g10/options.h (struct opt): Add field "print_pka_records".
* g10/keylist.c (list_keyblock_pka): New.
(list_keyblock): Call it if new option is set.
(print_fingerprint): Add mode 10.
--
This is a fist step towards a slightly updated PKA implementation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (sign_file): Use log_printf instead of stderr.
* g10/tdbdump.c (export_ownertrust): Use estream fucntions.
(import_ownertrust): Ditto.
* g10/tdbio.c (tdbio_dump_record): Ditto. Change arg to estream_t.
--
Reported-by: Guilhem Moulin <guilhem@fripost.org>
Needed for unattended key edits with --status-fd, because since 2.1
status prompts are preceded by es_fflush (in cpr.c:do_get_from_fd)
not fflush(3), so the standard output may not be flushed before each
prompt. (Which breaks scripts using select(2) to multiplex between
the standard and status outputs.)
His patch only affected print_and_check_one_sig_colon() but there are
many more places where stdio and estream are mixed. This patch now
replaces most of them in g10/. At some places stdio is still used,
but that is local to a function and should not have side effects.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
Commit 91b826a38880fd8a989318585eb502582636ddd8 was not enough to
avoid all sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that once and for
all almost all uses of "<< 24" and "<< 8" are changed by this patch to
use an inline function from host2net.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyring.c (keyring_get_keyblock): Whitelist allowed packet
types.
* g10/keydb.c (parse_keyblock_image): Ditto.
--
The keyring DB code did not reject packets which don't belong into a
keyring. If for example the keyblock contains a literal data packet
it is expected that the processing code stops at the data packet and
reads from the input stream which is referenced from the data packets.
Obviously the keyring processing code does not and cannot do that.
However, when exporting this messes up the IOBUF and leads to an
invalid read of sizeof (int).
We now skip all packets which are not allowed in a keyring.
Reported-by: Hanno Böck <hanno@hboeck.de>
Test data:
gpg2 --no-default-keyring --keyring FILE --export >/dev/null
With this unpacked data for FILE:
-----BEGIN PGP ARMORED FILE-----
mI0EVNP2zQEEALvETPVDCJDBXkegF4esiV1fqlne40yJnCmJeDEJYocwFPXfFA86
sSGjInzgDbpbC9gQPwq91Qe9x3Vy81CkyVonPOejhINlzfpzqAAa3A6viJccZTwt
DJ8E/I9jg53sbYW8q+VgfLn1hlggH/XQRT0HkXMP5y9ClURYnTsNwJhXABEBAAGs
CXRlc3QgdGVzdIi5BBMBCgAjBQJU0/bNAhsDBwsJCAcDAgEGFQgCCQoLBBYCAwEC
HgECF4AACgkQlsmuCapsqYLvtQP/byY0tM0Lc3moftbHQZ2eHj9ykLjsCjeMDfPx
kZUUtUS3HQaqgZLZOeqPjM7XgGh5hJsd9pfhmRWJ0x+iGB47XQNpRTtdLBV/WMCS
l5z3uW7e9Md7QVUVuSlJnBgQHTS6EgP8JQadPkAiF+jgpJZXP+gFs2j3gobS0qUF
eyTtxs+wAgAD
=uIt9
-----END PGP ARMORED FILE-----
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (write_fake_data): Take care of a NULL stored as
opaque MPI.
--
Reported-by: Hanno Böck <hanno@hboeck.de>
Test data:
gpg2 --no-default-keyring --keyring FILE --export
With this unpacked data for FILE:
-----BEGIN PGP ARMORED FILE-----
Version: GnuPG v2
Comment: Use "gpg --dearmor" for unpacking
mI0EGRkZGRkZGRkZGRkZGRkBGRkZGRkZGRkZGRkZGQAZGRkZGRkZGRkZGRkZGRkZ
GRkZInzgDbpa/9gQ4wq9////f3Vy81CkyVq3HQaqgZLZOeqPjM7XgGh5hJvAkpec
9wAAAgDHe0FVFbkppJZXP+gFs6z3gobS0qUFeyTtxs+wAgAD
=JDFT
-----END PGP ARMORED FILE-----
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.w32-manifest.in: New.
* g10/gpg-w32info.rc: Add manifest.
* g10/Makefile.am (EXTRA_DIST): Add manifest.
(gpg-w32info.o): Depend on manifest.
* configure.ac (BUILD_VERSION): New.
(AC_CONFIG_FILES): Add manifest.
--
There are no dependencies yet defined - we need to do this for the
libs first.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (MAX_KEY_PACKET_LENGTH): New.
(MAX_UID_PACKET_LENGTH): New.
(MAX_COMMENT_PACKET_LENGTH): New.
(MAX_ATTR_PACKET_LENGTH): New.
(parse_key): Limit the size of a key packet to 256k.
(parse_user_id): Use macro for the packet size limit.
(parse_attribute): Ditto.
(parse_comment): Ditto.
--
Without that it is possible to force gpg to allocate large amounts of
memory by using a bad encoded MPI. This would be an too easy DoS.
Another way to mitigate would be to change the MPI read function to
allocate memory dynamically while reading the MPI. However, that
complicates and possibly slows down the code. A too large key packet
is in any case a sign for broken data and thus gpg should not use it.
Reported-by: Hanno Böck
GnuPG-bug-id: 1823
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (list_config): Replace print_sanitized_string2 by
es_write_sanitized.
* common/stringhelp.c (print_sanitized_buffer2): Remove.
(print_sanitized_buffer, print_sanitized_utf8_buffer): Remove.
(print_sanitized_utf8_buffer, print_sanitized_utf8_string): Remove.
(print_sanitized_string): Remove.
* sm/certdump.c (print_dn_part, print_dn_parts): Remove arg FP.
(pretty_print_sexp, gpgsm_print_name2, gpgsm_print_name): Remove.
--
Mixing stdio and estream is never a good idea. This fix also allows
us to remove a lot of garbage.
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
GnuPG-bug-id: 1822
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_search_first, keydb_search_next): Skip legacy
keys.
* g10/keyring.c (keyring_get_keyblock): Handle GPG_ERR_LEGACY_KEY.
(prepare_search): Ditto.
(keyring_rebuild_cache): Skip legacy keys.
* g10/keyserver.c (keyidlist): Ditto.
* g10/trustdb.c (validate_key_list): Ditto.
--
This is not the most elegant way to handle it but it reduces the
chance for unwanted side effects.
GnuPG-bug-id: 1816
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.h (g10_errstr): Remove macro and change all occurrences by
gpg_strerror.
(G10ERR_): Remove all macros and change all occurrences by their
GPG_ERR_ counterparts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c: Include shareddefs.h.
(quick_generate_keypair): Support static passphrase.
(get_parameter_passphrase): New.
(do_generate_keypair): Use it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Fix order of args.
--
That bug has been here since the beginning. The entire function needs
a review or be be moved to Libgcrypt.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (GPG_ERR_OBJ_TERM_STATE): New.
* scd/iso7816.c (map_sw): Add this error code.
* scd/app-openpgp.c (do_getattr): Return the life cycle indicator.
* scd/app.c (select_application): Allow a return value of
GPG_ERR_OBJ_TERM_STATE.
* scd/scdaemon.c (set_debug): Print the DBG_READER value.
* g10/call-agent.c (start_agent): Print a status line for the
termination state.
(agent_scd_learn): Make arg "info" optional.
(agent_scd_apdu): New.
* g10/card-util.c (send_apdu): New.
(factory_reset): New.
(card_edit): Add command factory-reset.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (pct_expando): Reorder conditions for clarity.
* g10/sign.c (write_signature_packets): Fix notation data creation.
--
Also re-added the check for signature version > 3.
Reported-by: MFPA
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_learn): Add option --sendinfo.
* agent/learncard.c (agent_handle_learn): Add arg "send" andsend
certifciate only if that is set.
* g10/call-agent.c (agent_scd_learn): Use --sendinfo. Make INFO
optional.
(agent_learn): Remove.
* g10/keygen.c (gen_card_key): Replace agent_learn by agent_scd_learn.
--
The requirement of using --card-status on the first use of card on a
new box is a bit annoying but the alternative of always checking
whether a card is available before a decryption starts does not sound
promising either.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (can_handle_critical): Check content length
before calling can_handle_critical_notation.
--
The problem was found by Jan Bee and gniibe proposed the used fix.
Thanks.
This bug can't be exploited: Only if the announced length of the
notation is 21 or 32 a memcmp against fixed strings using that length
would be done. The compared data is followed by the actual signature
and thus it is highly likely that not even read of unallocated memory
will happen. Nevertheless such a bug needs to be fixed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Remove keyserver_options.other.
* g10/gpg.c (main): Obsolete option --honor-http-proxt.
* g10/keyserver.c (add_canonical_option): Replace by ...
(warn_kshelper_option): New.
(parse_keyserver_uri): Obsolete "x-broken-http".
--
Some of these options are deprecated for 10 years and they do not make
any sense without the keyserver helpers. For one we print a hint on
how to replace it:
gpg: keyserver option 'ca-cert-file' is obsolete; \
please use 'hkp-cacert' in dirmngr.conf
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import): Skip too large keys.
* kbx/keybox-file.c (IMAGELEN_LIMIT): Change limit from 2MB to 5MB.
--
The key which triggered the problem was 0x57930DAB0B86B067. With this
patch it can be imported. Keys larger than the now increased limit of
5MB will are skipped and the already existing not_imported counter is
bumped up.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (decrypt_data): Return an error code instead of
calling BUG().
--
This code path can be triggered by fuzzing gpg and thus with some
likeness also by corrupt messages for other reasons.
* g10/parse-packet.c (dump_sig_subpkt): Print regex subpacket
sanitized.
--
We may not use "%s" to print an arbitrary buffer. At least "%.*s"
should have been used. However, it is in general preferable to escape
control characters while printf user data.
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_attribute_subpkts): Check that the
attribute packet is large enough for the subpacket type.
--
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (get_parameter_algo): Map ECC algorithm strings
directly.
--
Interactive generation of the keys uses the OpenPGP algorithms numbers
but batch generation allows the use of strings.
Reported-by: Gaetan Bisson.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (stats_s): Add field v3keys.
(import): Update this field.
(import_print_stats): Print v3 key count.
(read_block): Skip v3 keys and return a count for them.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (sign_file): Use DSA or ECDSA and not DSA|EdDSA.
--
This error was introduced with
commit b7f8dec6325f1c80640f878ed3080bbc194fbc78
while separating EdDSA from ECDSA.
Found due to a related bug report from Brian Minton.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/openfile.c (open_sigfile): Factor some code out to ...
(get_matching_datafile): new function.
* g10/plaintext.c (hash_datafiles): Do not try to find matching file
in batch mode.
* g10/mainproc.c (check_sig_and_print): Print a warning if a possibly
matching data file is not used by a standard signatures.
--
Allowing to use the abbreviated form for detached signatures is a long
standing bug which has only been noticed by the public with the
release of 2.1.0. :-(
What we do is to remove the ability to check detached signature in
--batch using the one file abbreviated mode. This should exhibit
problems in scripts which use this insecure practice. We also print a
warning if a matching data file exists but was not considered because
the detached signature was actually a standard signature:
gpgv: Good signature from "Werner Koch (dist sig)"
gpgv: WARNING: not a detached signature; \
file 'gnupg-2.1.0.tar.bz2' was NOT verified!
We can only print a warning because it is possible that a standard
signature is indeed to be verified but by coincidence a file with a
matching name is stored alongside the standard signature.
Reported-by: Simon Nicolussi (to gnupg-users on Nov 7)
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/armor.c (parse_hash_header,carmor_filter): Ignore MD5 in hash
header.
(fake_packet): Remove pgp-2 workaround for white space stripping.
* g10/filter.h (armor_filter_context_t): Remove field pgp2mode.
* g10/options.h (opt): Remove field pgp2_workarounds.
* g10/gpg.c (main): Do not set this field.
* g10/gpgv.c (main): Ditto.
* g10/mainproc.c (proc_encrypted): Use SHA-1 as fallback s2k hash
algo. Using MD5 here is useless.
(proc_plaintext): Remove PGP-2 related woraround
(proc_tree): Remove another workaround but keep the one for PGP-5.
--
The removed code was either not anymore used or its use would have
caused an error message later anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_get): Factor all code out to ...
(keyserver_get_chunk): new. Extimate line length.
(keyserver_get): Split up requests into chunks.
--
Note that refreshing all keys still requires way to much memory
because we build an in-memory list of all keys first. It is required
to first get a list of all keys to avoid conflicts while updating the
key store in the process of receiving keys. A better strategy would
be a background process and tracking the last update in the key store.
GnuPG-bug-id: 1755
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_KEEP_OWNERTTRUST): New.
* g10/import.c (parse_import_options): Add "keep-ownertrust".
(import_one): Act upon new option.
--
This option is in particular useful to convert from a pubring.gpg to
the new pubring.kbx in GnuPG 2.1 or vice versa:
gpg1 --export | gpg2 --import-options keep-ownertrust --import
* gl/: Remove entire tree.
* configure.ac: Remove gnulib tests and the gl/ Makefile.
(setenv): Add to AC_CHECK_FUNCS.
* autogen.rc (extra_aclocal_flags): Set to empty.
* Makefile.am (ACLOCAL_AMFLAGS): Remove -I gl/m4
(SUBDIRS): Remove gl/.
* agent/Makefile.am (common_libs): Remove ../gl/gnulib.a
* common/Makefile.am (t_common_ldadd): Ditto.
* dirmngr/Makefile.am (dirmngr_LDADD): Ditto.
(dirmngr_ldap_LDADD, dirmngr_client_LDADD): Ditto.
* g10/Makefile.am (needed_libs): Ditto.
* g13/Makefile.am (g13_LDADD): Ditto.
* kbx/Makefile.am (kbxutil_LDADD): Ditto.
($(PROGRAMS)): Ditto.
* scd/Makefile.am (scdaemon_LDADD): Ditto.
* sm/Makefile.am (common_libs): Ditto.
* tools/Makefile.am (common_libs, commonpth_libs): Ditto.
* agent/gpg-agent.c: Remove "mkdtemp.h"
* g10/exec.c: Ditto.
* scd/scdaemon.c: Ditto.
* tools/symcryptrun.c: Ditto.
* common/sysutils.c: Remove "setenv.h"
* common/t-timestuff.c: Use putenv if setenv is not available.
--
gnulib has always been a cause of trouble in GnuPG because we used
only a very few functions and the complex include machinery of gnulib
is quite complex and the cause for many build problems for example on
OS X. This is not gnulib's fault but due to our limited use of gnulib
and that we only rarely update the gnulib code to avoid regressions.
In part two we will address the functions
mkdtemp
setenv
unsetenv
strpbrk
which may bot be implemented on all platforms. They are not required
on a libc based system.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Also fixed some of my own copyright notices due to the termination of
my assignment. The one displayed by --version is kept at FSF because
we had contributors in 2014 with FSF assignments and it gives the FSF
some visibility.
* agent/command.c (cmd_export_key): Actually implement the cache_nonce
feature.
* g10/export.c (do_export_stream): Make use of a cache_nonce.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkey_next): Divert to getkey_next.
(get_pubkey_end): Move code to getkey_end.
* g10/keydb.c (keydb_search_reset): Add a debug statement.
(dump_search_desc): Add arg HD and print the handle.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c: Remove unused PASSPHRASE related code.
(proc_parameter_file): Remove useless asking for a passphrase in batch
mode.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
--
The keys which may be used to sign GnuPG packages are:
rsa2048/4F25E3B6 2011-01-12 [expires: 2019-12-31]
D869 2123 C406 5DEA 5E0F 3AB5 249B 39D2 4F25 E3B6
Werner Koch (dist sig)
rsa2048/E0856959 2014-10-29 [expires: 2019-12-31]
46CC 7308 65BB 5C78 EBAB ADCF 0437 6F3E E085 6959
David Shaw (GnuPG Release Signing Key) <dshaw@jabberwocky.com>
rsa2048/33BD3F06 2014-10-29 [expires: 2016-10-28]
031E C253 6E58 0D8E A286 A9F2 2071 B08A 33BD 3F06
NIIBE Yutaka (GnuPG Release Key) <gniibe@fsij.org>
rsa2048/7EFD60D9 2014-10-19 [expires: 2020-12-31]
D238 EA65 D64C 67ED 4C30 73F2 8A86 1B1C 7EFD 60D9
Werner Koch (Release Signing Key)
These keys are all created and used on tokens. 7EFD60D9 is currently
not used but ready to replace 4F25E3B6 in case the former token break.
* kbx/keybox.h (keybox_blobtype_t): New.
* kbx/keybox-defs.h (BLOBTYPE_*): Replace by KEYBOX_BLOBTYPE_*.
* kbx/keybox-search.c (keybox_search): Add arg want_blobtype and skip
non-matching blobs.
* sm/keydb.c (keydb_search): Pass KEYBOX_BLOBTYPE_X509 to keybox_search.
* g10/keydb.c (keydb_search): Pass KEYBOX_BLOBTYPE_PGP to keybox_search.
--
Without this fix a listing of all keys would fail because the wrong
blob type would be returned for the gpg or gpgsm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_key): Store even unsupported packet
versions.
* g10/keyring.c (keyring_rebuild_cache): Do not copy keys with
versions less than 4.
--
That function, which is implicitly called while checking the keydb, led
to corruption of v3 key packets in the keyring which would later spit
out "packet(6)too short" messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (have_secret_key_with_kid): Do not change the search
mode.
--
The search mode was accidentally changed to search-next after finding
the first keyblock. The intention was to look for a duplicate keyid
in the keydb which works by not doing a keydb_search_reset.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (agent_scd_learn): Rename from agent_learn.
(agent_learn): New.
* g10/keygen.c (gen_card_key): Call new agent-learn.
--
Without a shadow key we can't create the self-signatures. Thus we
need to issue the learn command after each key generation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (do_key): Remove support for building v3 keys.
* g10/parse-packet.c (read_protected_v3_mpi): Remove.
(parse_key): Remove support for v3-keys. Add dedicated warnings for
v3-key packets.
* g10/keyid.c (hash_public_key): Remove v3-key support.
(keyid_from_pk): Ditto.
(fingerprint_from_pk): Ditto.
* g10/options.h (opt): Remove fields force_v3_sigs and force_v4_certs.
* g10/gpg.c (cmd_and_opt_values): Remove oForceV3Sigs, oNoForceV3Sigs,
oForceV4Certs, oNoForceV4Certs.
(opts): Turn --force-v3-sigs, --no-force-v3-sigs, --force-v4-certs,
--no-force-v4-certs int dummy options.
(main): Remove setting of the force_v3_sigs force_v4_certs flags.
* g10/revoke.c (gen_revoke, create_revocation): Always create v4 certs.
* g10/sign.c (hash_uid): Remove support for v3-signatures
(hash_sigversion_to_magic): Ditto.
(only_old_style): Remove this v3-key function.
(write_signature_packets): Remove support for creating v3-signatures.
(sign_file): Ditto.
(sign_symencrypt_file): Ditto.
(clearsign_file): Ditto. Remove code to emit no Hash armor line if
only v3-keys are used.
(make_keysig_packet): Remove arg SIGVERSION and force using
v4-signatures. Change all callers to not pass a value for this arg.
Remove all v3-key related code.
(update_keysig_packet): Remove v3-signature support.
* g10/keyedit.c (sign_uids): Always create v4-signatures.
* g10/textfilter.c (copy_clearsig_text): Remove arg pgp2mode and
change caller.
--
v3 keys are deprecated for about 15 years and due the severe
weaknesses of MD5 it does not make any sense to keep code around to
use these old and broken keys. Users who need to decrypt old messages
should use gpg 1.4 and best re-encrypt them to modern standards.
verification of old (i.e. PGP2) created signatures is thus also not
anymore possible but such signatures have no values anyway - MD5 is
just too broken.
We have also kept support for v3 signatures until now. With the
removal of support for v3 keys it is questionable whether it makes any
sense to keep support for v3-signatures. What we do now is to keep
support for verification of v3-signatures but we force the use of
v4-signatures. The latter makes the --pgp6 and --pgp7 switch a bit
obsolete because those PGP versions require v3-signatures for
messages. These versions of PGP are also really old and not anymore
maintained so they have not received any bug fixes and should not be
used anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (stats_s): Remove field "imported_rsa".
(import_print_stats): Do not print separate value for RSA.
(import_one): Remove the RSA counter.
--
RSA is the standard key format and thus there is no more need to have
a separate counter. This is a remain from the RSA patent times.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (keyid_list): Add field "fpr".
(cache_user_id): Store fpr and check for dups only by fpr.
(get_pubkey_byfpr): New.
(get_user_id_string): Make static and use xasprintf.
(get_long_user_id_string): Use xasprintf.
(get_user_id_byfpr): New.
(get_user_id_byfpr_native): New.
* g10/keyid.c (fingerprint_from_pk): Make arg RET_LEN optional.
* g10/import.c (import_one): Use get_user_id_byfpr_native.
--
We now cache the userids using the fingerprint. This allows to print
the correct user id for keys with a duplicated key id. We should
eventually start to retire the use of all the old keyid based
functions. However, at some places we only have the keyid and thus
some of them will need to be kept (maybe changed with an indication to
show that more than several user ids are matching).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_handle): Add field no_caching.
(keyblock_cache): Repalce field kid by fpr.
(keydb_disable_caching): New.
(keydb_search): Use the fingerprint as cache index.
* g10/import.c (import_one): Use the fingerprint and not the kid to
lookup the key. Call keydb_disable_caching beofre re-searching for
update.
* tests/openpgp/import.test: Add a test case.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Added --enable-large-secmem option.
* g10/options.h: Add opt.flags.large_rsa.
* g10/gpg.c: Contingent on configure option: adjust secmem size,
add gpg --enable-large-rsa, bound to opt.flags.large_rsa.
* g10/keygen.c: Adjust max RSA size based on opt.flags.large_rsa
* doc/gpg.texi: Document --enable-large-rsa.
--
This is a cherry-pick of 534e2876acc05f9f8d9b54c18511fe768d77dfb5 from
STABLE-BRANCH-1-4 against master
Some older implementations built and used RSA keys up to 16Kib, but
the larger secret keys now fail when used by more recent GnuPG, due to
secure memory limitations.
Building with ./configure --enable-large-secmem will make gpg
capable of working with those secret keys, as well as permitting the
use of a new gpg option --enable-large-rsa, which let gpg generate RSA
keys up to 8Kib when used with --batch --gen-key.
Debian-bug-id: 739424
Minor edits by wk.
GnuPG-bug-id: 1732
* kbx/keybox-search.c (keybox_search): Add arg r_skipped and skip too
long blobs.
* sm/keydb.c (keydb_search): Call keybox_search with a dummy param.
* g10/keydb.c (struct keydb_handle): Add field skipped_long_blobs.
(keydb_search_reset): Reset that field.
(keydb_search): Update that field.
(keydb_get_skipped_counter): New.
* g10/keylist.c (list_all): Print count of skipped keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-defs.h (struct keybox_handle): Add field for_openpgp.
* kbx/keybox-file.c (_keybox_write_header_blob): Set openpgp header
flag.
* kbx/keybox-blob.c (_keybox_update_header_blob): Add arg for_openpgp
and set header flag.
* kbx/keybox-init.c (keybox_new): Rename to do_keybox_new, make static
and add arg for_openpgp.
(keybox_new_openpgp, keybox_new_x509): New. Use them instead of the
former keybox_new.
* kbx/keybox-update.c (blob_filecopy): Add arg for_openpgp and set the
openpgp header flags.
* g10/keydb.c (rt_from_file): New. Factored out and extended from
keydb_add_resource.
(keydb_add_resource): Switch to the kbx file if it has the openpgp
flag set.
* kbx/keybox-dump.c (dump_header_blob): Print header flags.
--
The problem was reported by dkg on gnupg-devel (2014-10-07):
I just discovered a new problem, though, which will affect people on
systems that have gpg and gpg2 coinstalled:
0) create a new keyring with gpg2, and use it exclusively with gpg2
for a while.
1) somehow (accidentally?) use gpg (1.4.x) again -- this creates
~/.gnupg/pubring.gpg
2) future runs of gpg2 now only look at pubring.gpg and ignore
pubring.kbx -- the keys you had accumulated in the keybox are no
longer listed in the output of gpg2 --list-keys
Note that gpgsm has always used pubring.kbx and thus this file might
already be there but without gpg ever inserted a key. The new flag in
the KBX header gives us an indication whether a KBX file has ever been
written by gpg >= 2.1. If that is the case we will use it instead of
the default pubring.gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/Makefile.am: Avoid $(DNSLIBS) for dirmngr_ldap
* g10/Makefile.am: $(LIBREADLINE) is only for gpg2; gpgv2 does not
need $(LIBASSUAN_LIBS)
* sm/Makefile.am: gpgsm does not need $(ZLIBS)
* tools/Makefile.am: gpgconf does not need $(NPTH_LIBS)
--
In the course of building GnuPG 2.1.0 beta864 on debian, i found that
several of the installed executables were linked to libraries that
they did not need to be linked to, which would cause unnecessary
package dependencies at runtime.
The changeset here removes these unnecessary libraries from linking.
Something similar could possibly also be done by passing --as-needed
to the linker, but trimming the depenencies seems more parsimonious.
* g10/keyid.c (keygrip_from_pk): Use log_info and clear array on error.
--
This may happen due to algorithms or curves not supported by
Libgcrypt. We should only print a warning and not have gpg return
with failure for a secret key listing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c, g10/call-agent.h (agent_get_version): New.
* g10/migrate.c (migrate_secring): Abort migration if
agent_get_version returns not at least 2.1.0
--
GnuPG-bug-id: 1718
On the first installation of GnuPG 2.1 it is likely that an
old gpg-agent is still running in the environment. In that
case the migration would fail.
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* agent/agent.h (opt): Remove field use_standard_socket.
* agent/command.c (cmd_killagent): Always allow killing.
* agent/gpg-agent.c (main): Turn --{no,}use-standard-socket and
--write-env-file into dummy options. Always return true for
--use-standard-socket-p. Do not print the GPG_AGENT_INFO envvar
setting or set that envvar.
(create_socket_name): Simplify by removing non standard socket
support.
(check_for_running_agent): Ditto.
* common/asshelp.c (start_new_gpg_agent): Remove GPG_AGENT_INFO use.
* common/simple-pwquery.c (agent_open): Ditto.
* configure.ac (GPG_AGENT_INFO_NAME): Remove.
* g10/server.c (gpg_server): Do not print the AgentInfo comment.
* g13/server.c (g13_server): Ditto.
* sm/server.c (gpgsm_server): Ditto.
* tools/gpgconf.c (main): Simplify by removing non standard socket
support.
--
The indented fix to allow using a different socket than the one in the
gnupg home directory is to change Libassuan to check whether the
socket files exists as a regualr file with a special keyword to
redirect to another socket file name.
* g10/main.h (DEFAULT_DIGEST_ALGO): Use SHA256 in --gnupg and SHA1 in
strict RFC or PGP modes.
* g10/sign.c (make_keysig_packet): Use DEFAULT_DIGEST_ALGO also for
RSA key signatures.
* configure.ac: Do not allow to disable sha256.
* g10/gpg.c (aFullKeygen): New.
(opts): Add command --full-key-gen.
(main): Implement it.
* g10/keygen.c (DEFAULT_STD_ALGO): Replace wrong GCRY_PK_RSA although
the value is identical.
(DEFAULT_STD_CURVE): New.
(DEFAULT_STD_SUBALGO): New.
(DEFAULT_STD_SUBKEYSIZE): New.
(DEFAULT_STD_SUBCURVE): New.
(quick_generate_keypair): Use new macros here.
(generate_keypair): Add arg "full" and fix call callers. Do not ask
for keysize in non-full node.
(ask_user_id): Add arg "full" and simplify for non-full mode.
* g10/gpg.c (main): Pass option names to obsolete_option without
double dash.
* g10/misc.c (obsolete_option, obsolete_scdaemon_option): Print double
dash only for command line options.
* g10/gpg.c: Add config options that should belong in scdaemon.conf
* g10/main.h, g10/misc.c (obsolete_scdaemon_option): New.
--
In gpg2, the following options are only relevant for scdaemon:
reader-port
ctapi-driver
pcsc-driver
disable-ccid
but in gpg1, they are options for gpg itself.
Some users of gpg1 might have these options in their
~/.gnupg/gpg.conf, which causes gpg2 to fail hard if it reads that
config file.
gpg2 should not fail hard, though giving a warning (and suggesting a
move to scdaemon.conf) seems OK.
This patch does *not* reintroduce any documentation for these options
in gpg.texi, even to indicate that they are "dummy" options, since
scdaemon.texi contains the appropriate documentation.
Debian-bug-id: 762844
- Program names factored out from obsolete_scdaemon_option to make
reuse without new translations easier. -wk
* g10/keydb.c (maybe_create_keyring_or_box): Rename arg for clarity.
(keydb_add_resource): Fix order of args to maybe_create_keyring_or_box
and check and create .kbx.
* g10/gpg.c (print_mds): Replace openpgp_md_test_algo.
--
This is actually not required because as of now the used OpenPGP and
Gcrypt hash algorithm numbers are identical. But that might change in
the future.
This changes the behavior of GnuPG in case it has been build with
some algorithms disabled: If those algorithms are available in
Libgcrypt, their results will be used printed anyway.
* g10/keyedit.c (subkey_expire_warning): New.
(keyedit_menu): Call it when needed.
--
GnuPG-bug-id: 1715
The heuristic to detect a problem is not very advanced but it should
catch the most common cases.
* agent/cache.c (last_stored_cache_key): New.
(agent_get_cache): Allow NULL for KEY.
(agent_store_cache_hit): New.
* agent/findkey.c (unprotect): Call new function and try to use the
last stored key.
* g10/revoke.c (create_revocation): Add arg CACHE_NONCE and pass to
make_keysig_packet.
(gen_standard_revoke): Add arg CACHE_NONCE and pass to
create_revocation.
* g10/keygen.c (do_generate_keypair): Call gen_standard_revoke with
cache nonce.
--
This patch adds two features:
1. The key for the last passphrase successfully used for unprotecting
a key is stored away. On a cache miss the stored away passphrase is
tried as well. This helps for the common GPG use case of having a
signing and encryption (sub)key with the same passphrase. See the
code for more comments.
2. The now auto-generated revocation certificate does not anymore
popup a passphrase prompt. Thus for standard key generation the
passphrase needs to be given only once (well, two with the
confirmation).
* common/openpgpdefs.h (PUBKEY_ALGO_EDDSA): Change to 22.
* g10/keygen.c (ask_curve): Reword the Curve25519 warning note.
--
In the hope that the IETF will eventually assign 22 for EdDSA using
the draft-koch-eddsa-for-openpgp-01 specs we start using this number.
* g10/passphrase.c (passphrase_get): Replace sprintf by xasprintf.
--
Without that at least the French translation does not always work
because it requires positional parameters. Windows for example does
not support them as they are not defined by C99 but by POSIX.
* g10/main.h (DEFAULT_CIPHER_ALGO): Chhange to AES or CAST5 or 3DES
depending on configure option.
* g10/gpg.c (main): Set opt.s2k_cipher_algo to DEFAULT_CIPHER_ALGO.
* g10/main.h (import_screener_t): New.
* g10/import.c (import): Add screener callbacks to param list.
(import_one): Ditto.
(import_secret_one): Ditto.
(import_keys_internal): Ditto.
(import_keys_stream): Ditto.
* g10/keyserver.c (struct ks_retrieval_screener_arg_s): New.
(keyserver_retrieval_screener): New.
(keyserver_get): Pass screener to import_keys_es_stream().
--
These changes introduces import functions that apply a constraining
filter to imported keys. These filters can verify the fingerprints of
the keys returned before importing them into the keyring, ensuring
that the keys fetched from the keyserver are in fact those selected by
the user beforehand.
Signed-off-by: Stefan Tomanek <tomanek@internet-sicherheit.de>
This is an extended and fixed versions of Stefan's patch. In addition
to the changes done in gnupg 2.0, namely the commits
5e933008beffbeae7255ece02383606481f9c169
044847a0e2013a2833605c1a9f80cfa6ef353309
088f82c0b5e39687f70e44d3ab719854e808eeb6
the symbol names have been changed to "screener" to void mixing them
up with the iobuf filter feature and it has been changed to be used
with the dirmngr based keyserver lookup.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sig-check.c (do_check): Move some code to ...
* g10/misc.c (print_md5_rejected_note): new function.
* g10/mainproc.c (proc_tree, proc_plaintext): Enable MD5 workaround
only if option --allow-weak-digest-algos is used.
* g10/gpg.c (oRFC1991, oPGP2): Remove
(opts): Remove --pgp2 and --rfc1991.
* g10/options.h (CO_PGP2, CO_RFC1991): Remove. Remove all users.
(RFC2440, PGP2): Remove. Remove all code only enabled by these
conditions.
* tests/openpgp/clearsig.test: Remove --rfc1991 test.
--
The use of PGP 2.c is considered insecure for quite some time
now (e.g. due to the use of MD5). Thus we remove all support for
_creating_ PGP 2 compatible messages.
* g10/gpg.c (oCompressKeys, oCompressSigs): Remove.
(opts): Turn --compress-keys and --compress-signs in NOPs.
* g10/options.h (opt): Remove fields compress_keys and compress_sigs.
* g10/export.c (do_export): Remove compress_keys feature.
* g10/sign.c (sign_file): Remove compress_sigs feature.
--
These features are disabled in GnuPG since the very early days and
they fulfill no real purpose. For now we keep the command line
options as dummys.
* g10/gpg.c (aQuickKeygen): New.
* g10/misc.c (is_valid_user_id): New stub.
* g10/keygen.c (quickgen_set_para): New.
(quick_generate_keypair): New.
--
Note that the validation of the specified user id has not yet been
implemented.
* g10/parse-packet.c (parse_attribute): Avoid xmalloc failure and cap
size of packet.
--
Tavis Ormandy reported a fatal error for attribute packets with a zero
length payload. This is due to a check in Libgcrypt's xmalloc which
rejects a malloc(0) instead of silently allocating 1 byte. The fix is
obvious.
In addition we cap the size of attribute packets similar to what we do
with user id packets. OpenPGP keys are not the proper way to store
movies.
* common/iobuf.c (direct_open): Add arg MODE700.
(iobuf_create): Ditto.
* g10/openfile.c (open_outfile): Add arg RESTRICTEDPERM. Change call
callers to pass 0 for it.
* g10/revoke.c (gen_desig_revoke, gen_revoke): Here pass true for new
arg.
* g10/export.c (do_export): Pass true for new arg if SECRET is true.
--
GnuPG-bug-id: 1653.
Note that this works only if --output has been used.
* g10/keygen.c (gen_elg): Enforce keysize 1024 to 4096.
(gen_rsa): Enforce keysize 1024 to 4096.
(gen_dsa): Enforce keysize 768 to 3072.
--
It was possible to create 16k RSA keys in batch mode. In addition to the
silliness of such keys, they have the major drawback that under GnuPG
and Libgcrypt, with their limited amount of specially secured memory
areas, the use of such keys may lead to an "out of secure memory"
condition.
* agent/cvt-openpgp.c (convert_to_openpgp): Use the curve name instead
of the curve parameters.
* g10/export.c (canon_pubkey_algo): Rename to ...
(canon_pk_algo): this. Support ECC.
(transfer_format_to_openpgp): Expect curve name.
* g10/compress.c (do_uncompress): Limit the number of extra FF bytes.
--
A packet like (a3 01 5b ff) leads to an infinite loop. Using
--max-output won't help if it is a partial packet. This patch
actually fixes a regression introduced on 1999-05-31 (c34c6769).
Actually it would be sufficient to stuff just one extra 0xff byte.
Given that this problem popped up only after 15 years, I feel safer to
allow for a very few FF bytes.
Thanks to Olivier Levillain and Florian Maury for their detailed
report.
* g10/gpg.c: Add option --with-secret.
* g10/options.h (struct opt): Add field with_secret.
* g10/keylist.c (public_key_list): Pass opt.with_secret to list_all
and list_one.
(list_all, list_one): Add arg mark_secret.
(list_keyblock_colon): Add arg has_secret.
* sm/gpgsm.c: Add option --with-secret.
* sm/server.c (option_handler): Add option "with-secret".
* sm/gpgsm.h (server_control_s): Add field with_secret.
* sm/keylist.c (list_cert_colon): Take care of with_secret. Also move
the token string from the wrong field 14 to 15.
--
This option is useful for key managers which need to know whether a
key has a secret key. This change allows to collect this information
in one pass.
* g10/keyid.c (hash_public_key): Take care of NULL keys.
* g10/misc.c (pubkey_nbits): Ditto.
--
This problem was mainly due to our ECC code while checking for opaque
MPIs with the curve name.
* g10/parse-packet.c (mpi_read): Change error message on overflow.
--
This gets gpg 2.x in sync to what gpg 1.4 does. No need to die for a
broken MPI.
GnuPG-bug-id: 1593
Resolved conflicts:
g10/parse-packet.c - whitespaces fixes.
* g10/getkey.c (get_user_id): Do not call xmalloc with 0.
* common/xmalloc.c (xmalloc, xcalloc): Take extra precaution not to
pass 0 to the arguments.
--
The problem did not occur in 1.x because over there the xmalloc makes
sure to allocate at least one byte. With 2.x for most calls the
xmalloc of Libgcrypt is used and Libgcrypt returns an error insteead
of silent allocating a byte. Thus gpg 2.x bailed out with an
"Fatal: out of core while allocating 0 bytes".
The extra code in xmalloc.c is for more robustness for the other
xmalloc calls.
* kbx/keybox-search.c (keybox_search): Add arg R_DESCINDEX. Chnage
both callers.
* g10/keydb.c (keydb_search): Always set DESCINDEX.
--
This only affects the new keybox for OpenPGP keys in 2.1. The bug
exhibited itself by running GPA's backup command on Windows.
* g10/decrypt-data.c (decrypt_data): Do not distinguish between a bad
MDC packer header and a bad MDC.
--
The separate diagnostic was introduced for debugging a problems. For
explaining an MDC error a single error message is easier to
understand.
* g10/keygen.c (ask_expire_interval): Get the current time after the
prompt.
--
This almost avoid that an entered full ISO timestamp is not used as
given but off by the time the user required to enter the timestamp.
GnuPG-bug-id: 1639
* g10/mainproc.c (check_sig_and_print): Factor common code out to ...
(print_good_bad_signature): here.
--
P was not released if the key had no user id.
* agent/cvt-openpgp.c (try_do_unprotect_arg_s): Add field "curve".
(get_keygrip): Add and use arg CURVE.
(convert_secret_key): Ditto.
(convert_transfer_key): Ditto.
(get_npkey_nskey): New.
(prepare_unprotect): Replace gcrypt functions by
get_npkey_nskey. Allow opaque MPIs.
(do_unprotect): Use CURVE instead of parameters.
(convert_from_openpgp_main): Ditto.
(convert_to_openpgp): Simplify.
* g10/import.c (one_mpi_from_pkey): Remove.
(transfer_secret_keys): Rewrite to use the curve instead of the
parameters.
* g10/parse-packet.c (parse_key): Mark protected MPIs with USER1 flag.
* common/openpgp-oid.c (openpgp_curve_to_oid): Allow the use of
"NIST P-256" et al.
* g10/keygen.c (ask_curve): Add arg ALGO.
(generate_keypair): Rewrite the ECC key logic.
* tests/openpgp/ecc.test: Provide the "ecc" passphrase.
* agent/cvt-openpgp.c (get_keygrip, convert_secret_key)
(convert_transfer_key): Follow newer (>= 1.6) libgcrypt API, which
does not distinguish the detail.
(do_unprotect, convert_from_openpgp_main): Don't call
map_pk_openpgp_to_gcry, as it's the value of libgcrypt API already and
not the value defined by OpenPGP.
(convert_to_openpgp): It's "ecc".
* agent/gpg-agent.c (map_pk_openpgp_to_gcry): Remove.
* g10/call-agent.c (agent_pkdecrypt): Fix off-by-one error.
* g10/pubkey-enc.c (get_it): Fix swapping the fields error.
* g10/call-agent.c (check_hijacking): New.
(start_agent): Call it.
(membuf_data_cb, default_inq_cb): Move more to the top.
--
Note that GUIs may use the gpg status line
[GNUPG:] ERROR check_hijacking 33554509
to detect this and print an appropriate warning.
* g10/photoid.c (show_photos): Set namehash.
* g10/misc.c (pct_expando): Add "%U" expando.
--
This makes is possible to extract all photos ids from a key to
different files.
* agent/cvt-openpgp.c (convert_to_openpgp): Fix use
gcry_sexp_extract_param.
* g10/export.c (do_export_stream): Provide a proper prompt to the
agent.
--
NB: The export needs more work, in particular the ECC algorithms.
* g10/passphrase.c (gpg_format_keydesc): Add mode 2. Change strings.
* g10/keydb.h (FORMAT_KEYDESC_NORMAL, FORMAT_KEYDESC_IMPORT)
(FORMAT_KEYDESC_EXPORT): New. Use them for clarity.
--
The use of the term "certificate" was more confusing than helpful.
* dirmngr/ks-engine-hkp.c (ks_hkp_get): Allow exact search mode.
* g10/keyserver.c (keyserver_import_name): Implement.
(keyserver_get): Use exact mode for name based import.
(keyserver_get): Add args R_FPR and R_FPRLEN. Change all callers.
* dirmngr/ks-engine-hkp.c (ks_hkp_search, ks_hkp_get): Print SOURCE
status lines.
* g10/call-dirmngr.c (ks_status_parm_s): New.
(ks_search_parm_s): Add field stparm.
(ks_status_cb): New.
(ks_search_data_cb): Send source to the data callback.
(gpg_dirmngr_ks_search): Change callback prototope to include the
SPECIAL arg. Adjust all users. Use ks_status_cb.
(gpg_dirmngr_ks_get): Add arg r_source and use ks_status_cb.
* g10/keyserver.c (search_line_handler): Adjust callback and print
"data source" disgnostic.
(keyserver_get): Print data source diagnostic.
--
It has often been requested that the actually used IP of a keyservers
is shown in with gpg --recv-key and --search-key. This is helpful if
the keyserver is actually a pool of keyservers. This patch does this.
* dirmngr/cdblib.c (cdb_init) [W32]: Remove unused var.
* dirmngr/dirmngr-client.c (start_dirmngr): s/int/assuan_fd_t/.
* dirmngr/dirmngr.c (w32_service_control): Mark unused args.
(call_real_main): New.
(main) [W32]: Use new function to match prototype.
(real_main) [W32]: Mark unused vars.
(handle_signal) [W32]: Do not build the function at all.
(handle_connections) [W32]: Do not define signo.
* dirmngr/ldap-wrapper-ce.c (outstream_reader_cb): Remove used vars.
* g10/tdbio.c (ftruncate) [DOSISH]: Define only if not yet defined.
* agent/call-scd.c (start_scd): Replace int by assuan_fd_t.
(start_pinentry): Ditto.
* common/asshelp.c (start_new_gpg_agent): Replace int by assuan_fd_t.
* common/dotlock.c (GNUPG_MAJOR_VERSION): Include stringhelp.h for
prototypes on Windows and some other platforms.
* common/logging.c (fun_writer): Declare addrbuf only if needed.
* g10/decrypt.c (decrypt_message_fd) [W32]: Return not_implemented.
* g10/encrypt.c (encrypt_crypt) [W32]: Return error if used in server
mode.
* g10/dearmor.c (dearmor_file, enarmor_file): Replace GNUPG_INVALID_FD
by -1 as temporary hack for Windows.
* g10/export.c (do_export): Ditto.
* g10/revoke.c (gen_desig_revoke, gen_revoke): Ditto.
* g10/sign.c (sign_file, clearsign_file, sign_symencrypt_file): Ditto.
* g10/server.c (cmd_verify, gpg_server) [W32]: Return an error.
--
The gpg server mode is not actual working and thus we can avoid the
warnings by explicitly disabling the mode. We keep it working under
Unix, though.
* g10/tdbio.c (tdbio_set_dbname): Add arg R_NOFILE.
* g10/trustdb.c (trustdb_args): Add field no_trustdb.
(init_trustdb): Set that field.
(revalidation_mark): Take care of a nonexistent trustdb file.
(read_trust_options): Ditto.
(tdb_get_ownertrust): Ditto.
(tdb_get_min_ownertrust): Ditto.
(tdb_update_ownertrust): Ditto.
(update_min_ownertrust): Ditto.
(tdb_clear_ownertrusts): Ditto.
(tdb_cache_disabled_value): Ditto.
(tdb_check_trustdb_stale): Ditto.
(tdb_get_validity_core): Ditto.
* g10/gpg.c (main): Do not create a trustdb with most commands for
trust-model always.
--
This slightly changes the semantics of most commands in that they
won't create a trustdb if --trust-model=always is used. It just does
not make sense to create a trustdb if there is no need for it.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 1a0eeaacd1bf09fe5125dbc3f56016bc20f3512e)
Resolved conflicts:
NEWS
g10/trustdb.c: Manually apply changes due to changed
function names.
Note that this also includes the fix for clear_ownertrust, see
GnuPG-bug-id: 1622.
* g10/options.h (IMPORT_NO_SECKEY): New.
* g10/keyserver.c (keyserver_spawn, keyserver_import_cert): Set new
flag.
* g10/import.c (import_secret_one): Deny import if flag is set.
--
By modifying a keyserver or a DNS record to send a secret key, an
attacker could trick a user into signing using a different key and
user id. The trust model should protect against such rogue keys but
we better make sure that secret keys are never received from remote
sources.
Suggested-by: Stefan Tomanek
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit e7abed3448c1c1a4e756c12f95b665b517d22ebe)
Resolved conflicts:
g10/import.c
g10/keyserver.c
* g10/photoid.c (show_photos) [DISABLE_PHOTO_VIEWER]: Mark args as
unused.
* tools/gpgconf-comp.c (my_dgettext): Mark DOMAIN as unused if NLS is
not configured.
* configure.ac: Add option --disable-trust-models
(NO_TRUST_MODELS): New ac_define and am_conditional.
* g10/Makefile.am (trust_source): New.
(gpg2_SOURCES): Factor some files out to above. Add trust.c.
* g10/gpg.c [NO_TRUST_MODELS]: Disable options --export-ownertrust,
--import-ownertrust, --update-trustdb, --check-trustdb, --fix-trustdb,
--list-trustdb, --trustdb-name, --auto-check-trustdb,
--no-auto-check-trustdb, and --force-ownertrust.
(parse_trust_model) [NO_TRUST_MODELS]: Do not build.
(main) [NO_TRUST_MODELS]: Set trust_model to always and exclude all
trustdb related option code.
* g10/keyedit.c (cmds) [NO_TRUST_MODELS]: Remove menu items "trust",
"enable", and "disable".
* g10/keylist.c (public_key_list) [NO_TRUST_MODELS]: Do not print
"tru" record.
* g10/trust.c: New.
* g10/trustdb.c (struct key_item): Move to trustdb.h.
(register_trusted_keyid): Rename to tdb_register_trusted_keyid.
(register_trusted_key): Rename to tdb_register_trusted_key.
(trust_letter, uid_trust_string_fixed, trust_value_to_string)
(string_to_trust_value, get_ownertrust_with_min, get_ownertrust_info)
(get_ownertrust_string, get_validity_info, get_validity_string)
(clean_sigs_from_uid, clean_uid_from_key, clean_key): Move to trust.c.
(mark_usable_uid_certs): Move to trust.c and make global.
(is_in_klist): Move as inline to trustdb.h.
(trustdb_check_or_update): Rename to tdb_check_or_update
(revalidation_mark): Rename to tdb_revalidation_mark.
(get_ownertrust): Rename to tdb_get_ownertrust.
(get_min_ownertrust): Rename to tdb_get_min_ownertrust.
(update_ownertrust): Rename to tdb_update_ownertrust.
(clear_ownertrusts): Rename to tdb_clear_ownertrusts.
(cache_disabled_value): Rename to tdb_cache_disabled_value.
(check_trustdb_stale): Rename to tdb_check_trustdb_stale.
(get_validity): Rename to tdb_get_validity_core, add arg MAIN_PK and
factor some code out to ...
* trust.c (get_validity): ...new.
(check_or_update_trustdb): New wrapper.
(revalidation_mark): New wrapper.
(get_ownertrust): New wrapper.
(get_ownertrust_with_min): New wrapper.
(update_ownertrust): New wrapper.
(clear_ownertrusts): New wrapper.
(cache_disabled_value): New wrapper.
(check_trustdb_stale): New wrapper.
* tests/openpgp/defs.inc (opt_always): New. Use in all tests instead
of --always-trust.
* g10/gpg.c (oLegacyListMode, opts, main): Add --legacy-list-mode.
* g10/options.h (struct opt): Add field legacy_list_mode.
* g10/keydb.h (PUBKEY_STRING_SIZE): New.
* g10/keyid.c (pubkey_string): New.
* g10/import.c (import_one, import_secret_one): Use pubkey_string.
* g10/keylist.c (print_seckey_info): Ditto.
(print_pubkey_info, print_card_key_info): Ditto.
(list_keyblock_print): Ditto.
* g10/mainproc.c (list_node): Ditto.
* g10/pkclist.c (do_edit_ownertrust, build_pk_list): Ditto.
* g10/keyedit.c (show_key_with_all_names): Ditto. Also change the
format.
(show_basic_key_info): Ditto.
* common/openpgp-oid.c (openpgp_curve_to_oid): Also allow "ed25519".
(openpgp_oid_to_curve): Downcase "ed25519"
--
For ECC it seems to be better to show the name of the curve and not
just the size of the prime field. The curve name does not anymore fit
into the "<size><letter>" descriptor (e.g. "2048R") and a fixed length
format does not work either. Thus the new format uses
"rsa2048" - RSA with 2048 bit
"elg1024" - Elgamal with 1024 bit
"ed25519" - ECC using the curve Ed25519.
"E_1.2.3.4" - ECC using the unsupported curve with OID "1.2.3.4".
unless --legacy-list-mode is given. In does not anymore line up
nicely in columns thus I expect further changes to this new format.
Signed-off-by: Werner Koch <wk@gnupg.org>
* acinclude.m4 (GNUPG_GPG_DISABLE_ALGO): New.
* configure.ac: Add --enable-gpg-* options to disable non MUS
algorithms.
* g10/misc.c (map_cipher_openpgp_to_gcry): Implement these options.
(openpgp_pk_test_algo2): Ditto.
(map_md_openpgp_to_gcry): Ditto.
(openpgp_cipher_test_algo, openpgp_md_test_algo): Simplify.
--
We have a similar feature in GnuPG-1. Although we don't shrink the
size of the gpg binary by disabling algorithms (they are implemented
in Libgcrypt), this feature may still be useful for inerop testing.
* g10/misc.c (openpgp_pk_algo_name): Return a different string for
each ECC algorithm.
* g10/gpg.c (build_list_pk_test_algo): New wrapper to cope with the
different algo type enums.
(build_list_pk_algo_name): Ditto.
(build_list_cipher_test_algo): Ditto.
(build_list_cipher_algo_name): Ditto.
(build_list_md_test_algo): Ditto.
(build_list_md_algo_name): Ditto.
(my_strusage): Use them.
(list_config): Ditto. Add "pubkeyname".
(build_list): Add letter==1 hack.
* g10/misc.c (print_pubkey_algo_note): Use enum typedef for the arg.
(print_cipher_algo_note): Ditto.
(print_digest_algo_note): Ditto.
(map_md_openpgp_to_gcry): New.
(openpgp_md_test_algo): Rewrite.
(openpgp_md_algo_name): Rewrite to do without Libgcrypt.
* g10/cpr.c (write_status_begin_signing): Remove hardwired list of
algo ranges.
* g10/misc.c (map_cipher_openpgp_to_gcry): Use explicit mapping and
use enums for the arg and return value.
(map_cipher_gcry_to_openpgp): Ditto.
(openpgp_cipher_blocklen): Use constant macros.
(openpgp_cipher_test_algo): Use mapping function and prepare to
disable algorithms.
(openpgp_cipher_algo_name): Do not use Libgcrypt.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Replace
CGRY_CIPHER_* by CIPHER_ALGO_*.
* common/openpgpdefs.h (cipher_algo_t): Remove unused
CIPHER_ALGO_DUMMY.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sexputil.c (get_pk_algo_from_canon_sexp): Change to return a
string.
* g10/keygen.c (check_keygrip): Adjust for change.
* sm/certreqgen-ui.c (check_keygrip): Likewise.
* agent/pksign.c (do_encode_dsa): Remove bogus map_pk_openpgp_to_gcry.
* g10/misc.c (map_pk_openpgp_to_gcry): Remove.
(openpgp_pk_test_algo): Change to a wrapper for openpgp_pk_test_algo2.
(openpgp_pk_test_algo2): Rewrite.
(openpgp_pk_algo_usage, pubkey_nbits): Add support for EdDSA.
(openpgp_pk_algo_name): Rewrite to remove need for gcry calls.
(pubkey_get_npkey, pubkey_get_nskey): Ditto.
(pubkey_get_nsig, pubkey_get_nenc): Ditto.
* g10/keygen.c(do_create_from_keygrip): Support EdDSA.
(common_gen, gen_ecc, ask_keysize, generate_keypair): Ditto.
* g10/build-packet.c (do_key): Ditto.
* g10/export.c (transfer_format_to_openpgp): Ditto.
* g10/getkey.c (cache_public_key): Ditto.
* g10/import.c (transfer_secret_keys): Ditto.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Ditto.
* g10/mainproc.c (proc_pubkey_enc): Ditto.
* g10/parse-packet.c (parse_key): Ditto,
* g10/sign.c (hash_for, sign_file, make_keysig_packet): Ditto.
* g10/keyserver.c (print_keyrec): Use openpgp_pk_algo_name.
* g10/pkglue.c (pk_verify, pk_encrypt, pk_check_secret_key): Use only
OpenPGP algo ids and support EdDSA.
* g10/pubkey-enc.c (get_it): Use only OpenPGP algo ids.
* g10/seskey.c (encode_md_value): Ditto.
--
This patch separates Libgcrypt and OpenPGP public key algorithms ids
and in most cases completely removes the Libgcrypt ones. This is
useful because for Libgcrypt we specify the algorithm in the
S-expressions and the public key ids are not anymore needed.
This patch also adds some support for PUBKEY_ALGO_EDDSA which will
eventually be used instead of merging EdDSA with ECDSA. As of now an
experimental algorithm id is used but the plan is to write an I-D so
that we can get a new id from the IETF. Note that EdDSA (Ed25519)
does not yet work and that more changes are required.
The ECC support is still broken right now. Needs to be fixed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_strings): New.
(write_status_text): Replace code by a call to write_status_strings.
* g10/mainproc.c (proc_encrypted): Remove show_session_key code.
* g10/decrypt-data.c (decrypt_data): Add new show_session_key code.
--
This feature can be used to return the session key for just a part of
a file. For example to downloading just the first 32k of a huge file,
decrypting that incomplete part and while ignoring all the errors
break out the session key. The session key may then be used on the
server to decrypt the entire file without the need to have the private
key on the server.
GnuPG-bug-id: 1389
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Rename field no_version to emit_version.
* g10/gpg.c (main): Init opt.emit_vesion to 1. Change --emit-version
to bump up opt.emit_version.
* g10/armor.c (armor_filter): Implement different --emit-version
values.
--
GnuPG-bug-id: 1572
Signed-off-by: Werner Koch <wk@gnupg.org>
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
* kbx/keybox-update.c (keybox_update_keyblock): Implement.
* kbx/keybox-search.c (get_blob_flags): Move to ...
* kbx/keybox-defs.h (blob_get_type): here.
* kbx/keybox-file.c (_keybox_read_blob2): Fix calling without R_BLOB.
* g10/keydb.c (build_keyblock_image): Allow calling without
R_SIGSTATUS.
(keydb_update_keyblock): Implement for keybox.
* kbx/keybox-dump.c (_keybox_dump_blob): Fix printing of the unhashed
size. Print "does not expire" also on 64 bit platforms.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/findkey.c (key_parms_from_sexp): Add algo name "ecc".
(agent_is_dsa_key): Ditto.
(agent_is_eddsa_key): New. Not finished, though.
* agent/pksign.c (do_encode_eddsa): New.
(agent_pksign_do): Use gcry_log_debug functions.
* agent/protect.c (agent_protect): Parse a flags parameter.
* g10/keygen.c (gpg_curve_to_oid): Move to ...
* common/openpgp-oid.c (openpgp_curve_to_oid): here and rename.
(oid_ed25519): New.
(openpgp_oid_is_ed25519): New.
(openpgp_oid_to_curve): New.
* common/t-openpgp-oid.c (test_openpgp_oid_is_ed25519): New.
* g10/build-packet.c (gpg_mpi_write): Write the length header also for
opaque MPIs.
(gpg_mpi_write_nohdr): New.
(do_key): Use gpg_mpi_write_nohdr depending on algorithm.
(do_pubkey_enc): Ditto.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Use
gpg_mpi_write_nohdr.
* g10/export.c (transfer_format_to_openpgp):
* g10/keygen.c (ecckey_from_sexp): Return the error.
(gen_ecc): Repalce arg NBITS by CURVE.
(read_parameter_file): Add keywords "Key-Curve" and "Subkey-Curve".
(ask_curve): New.
(generate_keypair, generate_subkeypair): Use ask_curve.
(do_generate_keypair): Also pass curve name.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Print
curve name.
* g10/parse-packet.c (mpi_read): Remove workaround for
Libcgrypt < 1.5.
(parse_key): Fix ECC case. Print the curve name.
* g10/pkglue.c (mpi_from_sexp): Rename to get_mpi_from_sexp.
(pk_verify, pk_check_secret_key): Add special case for Ed25519.
* g10/seskey.c (encode_md_value): Ditto.
* g10/sign.c (do_sign, hash_for, sign_file): Ditto.
--
Be warned that this code is subject to further changes and that the
format will very likely change before a release. There are also known
bugs and missing code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.c (MAX_NESTING_FILTER): New.
(iobuf_push_filter2): Limit the nesting level.
* g10/mainproc.c (mainproc_context): New field ANY. Change HAVE_DATA
and ANY_SIG_SIGN to bit fields of ANY. Add bit field
UNCOMPRESS_FAILED.
(proc_compressed): Avoid printing multiple Bad Data messages.
(check_nesting): Return GPG_ERR_BAD_DATA instead of UNEXPECTED_DATA.
--
This is a more general fix for the nested compression packet bug. In
particular this helps g10/import.c:read_block to stop pushing
compression filters onto an iobuf stream. This patch also reduces the
number of error messages for the non-import case.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 35e40e2d514223c950c2f6d1214e02e92d87e997)
Resolved conflicts:
common/iobuf.c
g10/mainproc.c
* scd/app-common.h (APP_DECIPHER_INFO_NOPAD): New.
* scd/app-openpgp.c (do_decipher): Add arg R_INFO.
* scd/app-nks.c (do_decipher): Add arg R_INFO as a dummy.
* scd/app.c (app_decipher): Add arg R_INFO.
* scd/command.c (cmd_pkdecrypt): Print status line "PADDING".
* agent/call-scd.c (padding_info_cb): New.
(agent_card_pkdecrypt): Add arg R_PADDING.
* agent/divert-scd.c (divert_pkdecrypt): Ditto.
* agent/pkdecrypt.c (agent_pkdecrypt): Ditto.
* agent/command.c (cmd_pkdecrypt): Print status line "PADDING".
* g10/call-agent.c (padding_info_cb): New.
(agent_pkdecrypt): Add arg R_PADDING.
* g10/pubkey-enc.c (get_it): Use padding info.
--
Decryption using a card never worked in gpg 2.1 because the
information whether the pkcs#1 padding needs to be removed was not
available. Gpg < 2.1 too this info from the secret sub key but that
has gone in 2.1.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_import_key): Add option --unattended.
* agent/cvt-openpgp.c (convert_transfer_key): New.
(do_unprotect): Factor some code out to ...
(prepare_unprotect): new function.
(convert_from_openpgp): Factor all code out to ...
(convert_from_openpgp_main): this. Add arg 'passphrase'. Implement
openpgp-native protection modes.
(convert_from_openpgp_native): New.
* agent/t-protect.c (convert_from_openpgp_native): New dummy fucntion
* agent/protect-tool.c (convert_from_openpgp_native): Ditto.
* agent/protect.c (agent_unprotect): Add arg CTRL. Adjust all
callers. Support openpgp-native protection.
* g10/call-agent.c (agent_import_key): Add arg 'unattended'.
* g10/import.c (transfer_secret_keys): Use unattended in batch mode.
--
With the gpg-agent taking care of the secret keys, the user needs to
migrate existing keys from secring.gpg to the agent. This and also
the standard import of secret keys required the user to unprotect the
secret keys first, so that gpg-agent was able to re-protected them
using its own scheme. With many secret keys this is quite some
usability hurdle. In particular if a passphrase is not instantly
available.
To make this migration smoother, this patch implements an unattended
key import/migration which delays the conversion to the gpg-agent
format until the key is actually used. For example:
gpg2 --batch --import mysecretkey.gpg
works without any user interaction due to the use of --batch. Now if
a key is used (e.g. "gpg2 -su USERID_FROM_MYSECRETKEY foo"), gpg-agent
has to ask for the passphrase anyway, converts the key from the
openpgp format to the internal format, signs, re-encrypts the key and
tries to store it in the gpg-agent format to the disk. The next time,
the internal format of the key is used.
This patch has only been tested with the old demo keys, more tests
with other protection formats and no protection are needed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (build_list): Rewrite to cope with buffer overflow in
certain locales.
--
This fixes an obvious bug in locales where the translated string is
longer than the original. The bug could be exhibited by using
LANG=ru_RU.utf8 gpg -v --version.
En passant we also removed the trailing white space on continued
lines.
Reported-by: Dmitry V. Levin" <ldv at altlinux.org>
(cherry picked from commit 3402a84720e7d8c6ad04fc50eacb338a8ca05ca1)
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/init.c (mem_cleanup_item_t): New.
(run_mem_cleanup): New.
(_init_common_subsystems): Add an atexit for it.
(register_mem_cleanup_func): New.
* g10/kbnode.c (cleanup_registered): New.
(release_unused_nodes): New.
(alloc_node): Call register_mem_cleanup_func.
--
It is often time consuming to figure out whether still allocated
memory at process termination is fine (e.g. a cache) or a problem. To
help for that register_mem_cleanup_func may now be used to cleanup
such memory. The run time of the program will be longer; if that
turns out to be a problem we can change the code to only run in
debugging mode.
* include/cipher.h (PUBKEY_USAGE_NONE): New.
* g10/getkey.c (parse_key_usage): Set new flag.
--
We do not want to use the default capabilities (derived from the
algorithm) if any key flags are given in a signature. Thus if key
flags are used in any way, the default key capabilities are never
used.
This allows to create a key with key flags set to all zero so it can't
be used. This better reflects common sense.
* g10/keygen.c (append_to_parameter): New.
(proc_parameter_file): Use new func to extend the parameter list.
* g10/passphrase.c (passphrase_to_dek_ext): Print a diagnostic of
gcry_kdf_derive failed.
* g10/keygen.c (proc_parameter_file): Print a diagnostic if
passphrase_to_dek failed.
--
Due to an improper way of using the linked list head, all memory for
items allocated in proc_parameter_file was never released. If batched
key generation with a passphrase and more than ~200 keys was used this
exhausted the secure memory.
* g10/keygen.c (append_to_parameter): New.
(proc_parameter_file): Use new func to extend the parameter list.
* g10/passphrase.c (passphrase_to_dek_ext): Print a diagnostic of
gcry_kdf_derive failed.
* g10/keygen.c (proc_parameter_file): Print a diagnostic if
passphrase_to_dek failed.
--
Due to an improper way of using the linked list head, all memory for
items allocated in proc_parameter_file was never released. If batched
key generation with a passphrase and more than ~200 keys was used this
exhausted the secure memory.
* g10/gpg.c: Include shareddefs.h.
(main): Add option --pinentry-mode.
* g10/options.h (struct opt): Add field pinentry_mode.
* g10/passphrase.c: Include shareddefs.h.
(have_static_passphrase): Take care of loopback pinentry_mode.
(read_passphrase_from_fd): Ditto.
(get_static_passphrase): New.
(passphrase_to_dek_ext): Factor some code out to ...
(emit_status_need_passphrase): new.
* g10/call-agent.c (start_agent): Send the pinentry mode.
(default_inq_cb): Take care of the PASSPHRASE inquiry. Return a
proper error code.
(agent_pksign): Add args keyid, mainkeyid and pubkey_algo.
(agent_pkdecrypt): Ditto.
* g10/pubkey-enc.c (get_it): Pass new args.
* g10/sign.c (do_sign): Pass new args.
* g10/call-agent.c (struct default_inq_parm_s): New. Change all
similar structs to reference this one. Change all users and inquire
callback to use this struct, instead of NULL or some undefined but not
used structs. This change will help to eventually get rid of global
variables.
--
This new features allows to use gpg without a Pinentry. As a
prerequisite the agent must be configured to allow the loopback
pinentry mode (option --allow-loopback-pinentry). For example
gpg2 --pinentry-mode=loopback FILE.gpg
may be used to decrypt FILE.gpg while entering the passphrase on the
tty. If batch is used, --passphrase et al. may be used, if
--command-fd is used, the passphrase may be provided by another
process. Note that there are no try-again prompts in case of a bad
passphrase.
* common/iobuf.c (iobuf_seek): Fix for temp streams.
* g10/pubkey-enc.c (get_session_key, get_it): Add some log_clock calls.
* g10/keydb.c (dump_search_desc): New.
(enum_keyblock_states, struct keyblock_cache): New.
(keyblock_cache_clear): New.
(keydb_get_keyblock, keydb_search): Implement a keyblock cache.
(keydb_update_keyblock, keydb_insert_keyblock, keydb_delete_keyblock)
(keydb_rebuild_caches, keydb_search_reset): Clear the cache.
--
Gpg uses the key database at several places without a central
coordination. This leads to several scans of the keybox for the same
key. To improve that we now use a simple cache to store a retrieved
keyblock in certain cases. In theory this caching could also be done
for old keyrings, but it is a bit more work and questionable whether
it is needed; the keybox scheme is anyway much faster than keyrings.
Using a keybox with 20000 384 bit ECDSA/ECHD keypairs and a 252 byte
sample text we get these values for encrypt and decrypt operations on
an Core i5 4*3.33Ghz system. The option --trust-model=always is used.
Times are given in milliseconds wall time.
| | enc | dec | dec,q |
|-----------+-----+-----+-------|
| key 1 | 48 | 96 | 70 |
| key 10000 | 60 | 98 | 80 |
| key 20000 | 69 | 106 | 88 |
| 10 keys | 540 | 290 | 70 |
The 10 keys test uses a mix of keys, the first one is used for
decryption but all keys are looked up so that information about are
printed. The last column gives decryption results w/o information
printing (--quiet).
The keybox is always scanned sequentially without using any index. By
adding an index to the keybox it will be possible to further reduce
the time required for keys stored to the end of the file.
* g10/keydb.c (parse_keyblock_image): Add args PK_NO and UID_NO and
set the note flags accordingly.
(keydb_get_keyblock): Transfer PK_NO and UID_NO to parse_keyblock_image.
* kbx/keybox-search.c (blob_cmp_fpr, blob_cmp_fpr_part)
(blob_cmp_name, blob_cmp_mail): Return the key/user number.
(keybox_search): Set the key and user number into the found struct.
(keybox_get_keyblock): Add args R_PK_NO and R_UID_NO and set them from
the found struct.
--
getkey.c needs to know whether the correct subkey was found. Thus we
need to set the node flags the same way we did it with the keyring
storage.
* common/logging.c (log_clock): New.
* g10/gpg.c (set_debug): Print clock debug flag.
* g10/options.h (DBG_CLOCK_VALUE, DBG_CLOCK): New.
--
To actually use log_clock you need to enable the code in
logginc.c:log_check() and link against librt. --debug 4096 may then
be used to enable it at runtime.
* g10/getkey.c (cache_public_key): Make room in the cache if needed.
--
To create the selfsigs, the key generation code makes use of the key
cache. However, after 4096 the cache is filled up and then disabled.
Thus generating more than 4096 keys in one run was not possible. We
now clear the first half the inserted keys every time the cache gets
full.
* g10/keydb.c (parse_keyblock_image): Add arg SIGSTATUS.
(keydb_get_keyblock): Handle it.
(build_keyblock_image): Add arg SIGSTATUS.
(keydb_insert_keyblock): Handle it.
* kbx/keybox-blob.c (pgp_create_sig_part): Add arg SIGSTATUS.
(_keybox_create_openpgp_blob): Ditto.
* kbx/kbxutil.c (import_openpgp): Adjust for above change.
* kbx/keybox.h (KEYBOX_FLAG_SIG_INFO): New.
* kbx/keybox-search.c (_keybox_get_flag_location): Handle new flag.
(keybox_get_keyblock): Add arg R_SIGSTATUS.
* kbx/keybox-update.c (keybox_insert_keyblock): Add arg SIGSTATUS.
--
With this change a key listing using the keybox format is now double
as fast as using a keyring. The memory use dropped as well. Measured
with about 1500 keys.
* g10/getkey.c (get_pubkey_fast): Improve the assertion.
* kbx/keybox.h: Include iobuf.h.
* kbx/keybox-blob.c (keyboxblob_uid): Add field OFF.
(KEYBOX_WITH_OPENPGP): Remove use of this macro.
(pgp_create_key_part_single): New.
(pgp_temp_store_kid): Change to use the keybox-openpgp parser.
(pgp_create_key_part): Ditto.
(pgp_create_uid_part): Ditto.
(pgp_create_sig_part): Ditto.
(pgp_create_blob_keyblock): Ditto.
(_keybox_create_openpgp_blob): Ditto.
* kbx/keybox-search.c (keybox_get_keyblock): New.
* kbx/keybox-update.c (keybox_insert_keyblock): New.
* g10/keydb.c (parse_keyblock_image):
(keydb_get_keyblock): Support keybox.
(build_keyblock_image): New.
(keydb_insert_keyblock): Support keybox.
* kbx/kbxutil.c (import_openpgp, main): Add option --dry-run and print
a kbx file to stdout.
* kbx/keybox-file.c (_keybox_read_blob2): Allow keyblocks up to 10^6
bytes.
--
Import and key listing does now work with the keybox format. It is
still quite slow and signature caching is completely missing.
Increasing the maximum allowed length for a keyblock was required due
to a 700k keyblock which inhibited kbxutil to list the file.
kbxutil's option name --import-openpgp is not quite appropriate
because it only creates KBX blobs from OpenPGP data.
* kbx/keybox-defs.h (_keybox_write_header_blob): Move prototype to ..
* kbx/keybox.h: here.
* kbx/keybox-init.c (keybox_lock): Add dummy function
* g10/keydb.c: Include keybox.h.
(KeydbResourceType): Add KEYDB_RESOURCE_TYPE_KEYBOX.
(struct resource_item): Add field kb.
(maybe_create_keyring_or_box): Add error descriptions to diagnostics.
Add arg IS_BOX. Write a header for a new keybox file.
(keydb_add_resource): No more need for the force flag. Rename the
local variable "force" to "create". Add URL scheme "gnupg-kbx". Add
magic test to detect a keybox file. Add basic support for keybox.
(keydb_new, keydb_get_resource_name, keydb_delete_keyblock)
(keydb_locate_writable, keydb_search_reset, keydb_search2): Add
support for keybox.
(lock_all, unlock_all): Ditto.
* g10/Makefile.am (needed_libs): Add libkeybox.a.
(gpg2_LDADD, gpgv2_LDADD): Add KSBA_LIBS as a workaround.
* g10/keydb.h (KEYDB_RESOURCE_FLAG_PRIMARY)
KEYDB_RESOURCE_FLAG_DEFAULT, KEYDB_RESOURCE_FLAG_READONLY): New.
* g10/gpg.c, g10/gpgv.c (main): Use new constants.
--
I did most of these changes back in 2011 and only cleaned them up
now. More to follow soon.
* g10/import.c (valid_keyblock_packet): New.
(read_block): Store only valid packets.
--
A corrupted key, which for example included a mangled public key
encrypted packet, used to corrupt the keyring. This change skips all
packets which are not allowed in a keyblock.
GnuPG-bug-id: 1455
(cherry-picked from commit f795a0d59e197455f8723c300eebf59e09853efa)
* keyserver.c (print_keyrec): Honor --keyid-format when getting back
full fingerprints from the keyserver (the comment in the code was
correct, the code was not).
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
* g10/keygen.c (keygen_set_std_prefs): Include IDEA only in PGP2
compatibility mode.
* g10/misc.c (idea_cipher_warn): Remove. Also remove all callers.
* common/status.h (STATUS_RSA_OR_IDEA): Remove. Do not emit this
status anymore.
--
To keep the number of actually used algorithms low, we want to support
IDEA only in a basically read-only way (unless --pgp2 is used during
key generation). It does not make sense to suggest the use of this
old 64 bit blocksize algorithm. However, there is old data available
where it might be helpful to have IDEA available.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
For the shared code parts it is cumbersome to pass an error sourse
variable to each function. Its value is always a constant for a given
binary and thus a global variable makes things a lot easier than the
former macro stuff.
* common/init.c (default_errsource): New global var.
(init_common_subsystems): Rename to _init_common_subsystems. Set
DEFAULT_ERRSOURCE.
* common/init.h: Assert value of GPG_ERR_SOURCE_DEFAULT.
(init_common_subsystems): New macro.
* common/util.h (default_errsource): Add declaration.
* kbx/keybox-defs.h: Add some GPG_ERR_SOURCE_DEFAULT trickery.
* g10/sign.c (update_keysig_packet): Honor --cert-digest-algo when
recreating a cert.
This is used by various things in --edit-key like setpref, primary,
etc. Suggested by Christian Aistleitner.
* g10/gpgv.c, g10/trustdb.c (read_trust_options): Add min_cert_level
* g10/trustdb.c (check_trustdb_stale): Request a rebuild if
pending_check_trustdb is true (set when we detect a trustdb
parameter has changed).
* g10/keylist.c (public_key_list): Use 'l' in the "tru" with-colons
listing for min_cert_level not matching.
* g10/tdbio.c (tdbio_update_version_record, create_version_record,
tdbio_db_matches_options, tdbio_dump_record, tdbio_read_record,
tdbio_write_record): Add a byte for min_cert_level in the tdbio
version record.
* g10/misc.c (pubkey_get_npkey, pubkey_get_nskey)
(pubkey_get_nsig, pubkey_get_nenc): Map all RSA algo ids to
GCRY_PK_RSA.
--
The problem is that Libgcrypt has no more support for the alternate
RSA ids and thus if asking for the number of parameters, they will
return zero. Now, this leads to packing the key parameters into an
opaque MPI but because the algorithm id is actually known to GPG, it
assumes valid RSA parameters.
An example key with RSA_S is 0x5434509D.
* scripts/gitlog-to-changelog: New script. Taken from gnulib.
* scripts/git-log-fix: New file.
* scripts/git-log-footer: New file.
* doc/HACKING: Describe the ChangeLog policy
* ChangeLog: New file.
* Makefile.am (EXTRA_DIST): Add new files.
(gen-ChangeLog): New.
(dist-hook): Run gen-ChangeLog.
Rename all ChangeLog files to ChangeLog-2011.
* common/dns-cert.c: Remove iobuf.h.
(get_dns_cert): Rename to _get_dns_cert. Remove MAX_SIZE arg. Change
iobuf arg to a estream-t. Rewrite function to make use of estream
instead of iobuf. Require all parameters. Return an gpg_error_t
error instead of the type. Add arg ERRSOURCE.
* common/dns-cert.h (get_dns_cert): New macro to pass the error source
to _gpg_dns_cert.
* common/t-dns-cert.c (main): Adjust for changes in get_dns_cert.
* g10/keyserver.c (keyserver_import_cert): Ditto.
* doc/gpg.texi (GPG Configuration Options): Remove max-cert-size.
This works by specifying the keygrip instead of an algorithm (section
number 13) and requires that the option -expert has been used. It
will be easy to extend this to the primary key.
Without this patch, pk2 would be freed twice.
>From 2a18a4b757e0896e738fefbbaa8ff8c23a9edf89 Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering@redhat.com>
Date: Tue, 20 Sep 2011 16:20:39 +0200
Subject: [PATCH] avoid use of freed pointer
If we free pk2 at the top of the for-loop, set it to NULL
so that we don't free it again just before returning.
* revoke.c (gen_desig_revoke): Don't use pk2 after freeing it.
This patch implementes a chunk mode to pass the key parameters from
scdaemon to gpg. This allows to pass arbitrary long key paremeters;
it is used for keys larger than 3072 bit.
Note: the card key generation in gpg is currently broken. The keys
are generated but it is not possible to create the self-signature
because at that time the gpg-agent does not yet know about the new
keys and thus can't divert the sign request to the card. We either
need to run the learn command right after calling agent_scd_genkey or
implement a way to sign using the currently inserted card. Another
option would be to get rid of agent_scd_genkey and implement the
feature directly in agent_genkey.
Returning -1 as an error code is not very clean given that gpg error
has more descriptive error codes. Thus we now return
GPG_ERR_NOT_FOUND for all search operations and adjusted all callers.
The protection used in the exported key used a different iteration
count than given in the S2K field. Thus all OpenPGP keys exported
from GnuPG 2.1-beta can't be imported again. Given that the actual
secret key material is kept in private-keys-v1.d/ the can be
re-exported with this fixed version.
Since 2009-12-08 gpg was not able to find email addresses indicated
by a leading '<'. This happened when I merged the user id
classification code of gpgsm and gpg.
This helps in the case of an unknown key algorithm with a corrupted
packet which claims a longer packet length. This used to allocate the
announced packet length and then tried to fill it up without detecting
an EOF, thus taking quite some time. IT is easy to fix, thus we do
it. However, there are many other ways to force gpg to use large
amount of resources; thus as before it is strongly suggested that the
sysadm uses ulimit do assign suitable resource limits to the gpg
process. Suggested by Timo Schulz.
Without Libgcrypt 1.5 is was not possible to use ECC keys. ECC is
major new feature and thus it does not make sense to allow building
with an older Libgcrypt without supporting ECC.
Also fixed a few missing prototypes.
This was a regression in 2.1 introduced due to having the agent do the
signing in contrast to the old "SCD PKSIGN" command which accesses the
scdaemon directly and passed the hash algorithm. The hash algorithm
is used by app-openpgp.c only for a sanity check.
The import test imports the keys as needed and because they are
passphrase protected we now need a pinentry script to convey the
passphrase to gpg-agent.
The basic network code from http.c is used for finger. This keeps the
network related code at one place and we are able to use the somewhat
matured code form http.c. Unfortunately I had to enhance the http
code for more robustness and probably introduced new bugs.
Test this code using
gpg --fetch-key finger:wk@g10code.com
(I might be the last user of finger ;-)
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
DECRYPTION_INFO <mdc_method> <sym_algo>
Print information about the symmetric encryption algorithm and
the MDC method. This will be emitted even if the decryption
fails.
Wrote the ChangeLog 2011-01-13 entry for Andrey's orginal work modulo
the cleanups I did in the last week. Adjusted my own ChangeLog
entries to be consistent with that entry.
Nuked quite some trailing spaces; again sorry for that, I will better
take care of not saving them in the future. "git diff -b" is useful
to read the actual changes ;-).
The ECC-INTEGRATION-2-1 branch can be closed now.
Import and export of secret keys does now work. Encryption has been
fixed to be compatible with the sample messages.
This version tests for new Libgcrypt function and thus needs to be
build with a new Libgcrypt installed.
Quite some changes were needed but in the end we have less code than
before. Instead of trying to do everything with MPIs and pass them
back and forth between Libgcrypt and GnuPG, we know use the
S-expression based interface and make heavy use of our opaque MPI
feature.
Encryption, decryption, signing and verification work with
self-generared keys.
Import and export does not yet work; thus it was not possible to check
the test keys at https://sites.google.com/site/brainhub/pgpecckeys .
Changed order of some conditional to make to put the special case into
the true branch. Indentation changes. Minor other changes to make the
ECC code more similar to the rest of our code.
It builds but many sefltests still fail. Need to fix that before
using it with an ECDH enabled libgcrypt.
[/]
2011-01-21 Werner Koch <wk@g10code.com>
* configure.ac: Need Libgcrypt 1.4.6 due to AESWRAP.
(HAVE_GCRY_PK_ECDH): Add new test.
[agent/]
2011-01-21 Werner Koch <wk@g10code.com>
* cvt-openpgp.c (GCRY_PK_ECDH) [!HAVE_GCRY_PK_ECDH]: New.
[include/]
2011-01-21 Werner Koch <wk@g10code.com>
* cipher.h (GCRY_PK_USAGE_CERT): Remove compatibility macros
because we now require libgcrypt 1.4.6.
(GCRY_PK_ECDH): Add replacement.
The following works:
gpg2 --gen-key (ECC)
gpg2 --list-keys
gpg2 --list-packets ~/.gnupg/pubring.gpg
gpg2 --list-packets <private key from http://sites.google.com/site/brainhub/pgpecckeys>
ECDH doesn't work yet as the code must be re-written to adjust for gpg-agent refactoring.
overflow when picking an algorithm (not a security issue since we
can't pick something not present in all preference lists, but we might
pick something that isn't scored first choice).
* pkclist.c (select_algo_from_prefs): Slightly improve the handling of
MD5 in preference lists. Instead of replacing MD5 with SHA-1, just
remove MD5 from the list altogether, and let the next-highest ranked
algorithm be chosen.
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* command.c (start_command_handler): Use assuan_fd_t and
assuan_fdopen on fds.
scd/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* command.c (scd_command_handler): Use assuan_fd_t and
assuan_fdopen on fds.
sm/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* server.c (gpgsm_server): Use assuan_fd_t and assuan_fdopen on
fds.
g10/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* server.c (gpg_server): Use assuan_fd_t and assuan_fdopen on fds.
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* command.c (reset_notify): Take LINE arg and return error.
(register_commands): Use assuan_handler_t type.
common/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* get-passphrase.c (default_inq_cb, membuf_data_cb): Change return
type to gpg_error_t.
g10/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* server.c (reset_notify, input_notify, output_notify): Update to
new assuan interface.
(register_commands): Use assuan_handler_t.
scd/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* command.c (reset_notify): Take LINE arg and return error.
(register_commands): Use assuan_handler_t type.
sm/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* server.c (reset_notify, input_notify, output_notify): Update to
new assuan interface.
(register_commands): Use assuan_handler_t.
* call-agent.c (membuf_data_cb, default_inq_cb)
(inq_ciphertext_cb, scd_serialno_status_cb)
(scd_keypairinfo_status_cb, istrusted_status_cb)
(learn_status_cb, learn_cb, keyinfo_status_cb): Return gpg_error_t.
* configure.ac (NEED_LIBASSUAN_API, NEED_LIBASSUAN_VERSION):
Update to new API (2, 1.1.0).
agent/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-agent.c (parse_rereadable_options): Don't set global assuan
log file (there ain't one anymore).
(main): Update to new API.
(check_own_socket_pid_cb): Return gpg_error_t instead of int.
(check_own_socket_thread, check_for_running_agent): Create assuan
context before connecting to server.
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(write_and_clear_outbuf): Use gpg_error_t instead of
assuan_error_t.
(cmd_geteventcounter, cmd_istrusted, cmd_listtrusted)
(cmd_marktrusted, cmd_havekey, cmd_sigkey, cmd_setkeydesc)
(cmd_sethash, cmd_pksign, cmd_pkdecrypt, cmd_genkey, cmd_readkey)
(cmd_keyinfo, cmd_get_passphrase, cmd_clear_passphrase)
(cmd_get_confirmation, cmd_learn, cmd_passwd)
(cmd_preset_passphrase, cmd_scd, cmd_getval, cmd_putval)
(cmd_updatestartuptty, cmd_killagent, cmd_reloadagent)
(cmd_getinfo, option_handler): Return gpg_error_t instead of int.
(post_cmd_notify): Change type of ERR to gpg_error_t from int.
(io_monitor): Add hook argument. Use symbols for constants.
(register_commands): Change return type of HANDLER to gpg_error_t.
(start_command_handler): Allocate assuan context before starting
server.
* call-pinentry.c: Include "scdaemon.h" before <assuan.h> because
of GPG_ERR_SOURCE_DEFAULT check.
(unlock_pinentry): Call assuan_release instead of
assuan_disconnect.
(getinfo_pid_cb, getpin_cb): Return gpg_error_t instead of int.
(start_pinentry): Allocate assuan context before connecting to
server.
* call-scd.c (membuf_data_cb, learn_status_cb, get_serialno_cb)
(membuf_data_cb, inq_needpin, card_getattr_cb, pass_status_thru)
(pass_data_thru): Change return type to gpg_error_t.
(start_scd): Allocate assuan context before connecting to server.
common/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Allocate assuan context before
starting server.
g10/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* call-agent.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(learn_status_cb, dummy_data_cb, get_serialno_cb, default_inq_cb)
(learn_status_cb, inq_writecert_parms, inq_writekey_parms)
(scd_genkey_cb, membuf_data_cb): Return gpg_error_t instead of
int.
* gpg.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(main): Update to new Assuan API.
* server.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, do_listkeys, cmd_listkeys)
(cmd_listsecretkeys, cmd_genkey, cmd_getinfo): Return gpg_error_t
instead of int.
(register_commands): Allocate assuan context before starting
server.
(gpg_server): Allocate assuan_context before starting server.
scd/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, open_card, cmd_serialno, cmd_lean, cmd_readcert)
(cmd_readkey, cmd_setdata, cmd_pksign, cmd_pkauth, cmd_pkdecrypt)
(cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_lock)
(cmd_unlock, cmd_getinfo, cmd_restart, cmd_disconnect, cmd_apdu)
(cmd_killscd): Return gpg_error_t instead of int.
(scd_command_handler): Allocate assuan context before starting server.
* scdaemon.c (main): Update to new Assuan API.
sm/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpgsm.c (main): Update to new assuan API.
* server.c: Include "gpgsm.h" before <assuan.h> due to check for
GPG_ERR_SOURCE_DEFAULT and assuan.h now including gpg-error.h.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, cmd_listkeys, cmd_dumpkeys)
(cmd_listsecretkeys, cmd_dumpsecretkeys, cmd_genkey)
(cmd_getauditlog, cmd_getinfo): Return gpg_error_t instead of int.
(register_commands): Same for member HANDLER in table.
(gpgsm_server): Allocate assuan context before starting server.
* sm/call-dirmngr.c:
* call-dirmngr.c (prepare_dirmngr): Check for CTX and error before
setting LDAPSERVER.
(start_dirmngr_ext): Allocate assuan context before starting
server.
(inq_certificate, isvalid_status_cb, lookup_cb, lookup_status_cb)
(run_command_cb, run_command_inq_cb, run_command_status_cb):
Return gpg_error_t instead of int.
tools/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (getinfo_pid_cb, read_and_print_response)
(main): Update to new Assuan API.
* mainproc.c (proc_encrypted): Clear passphrase cached with S2K
cache ID if decryption failed.
* passphrase.c (passphrase_to_dek_ext): Set dek->s2k_cacheid.
* gpgv.c (passphrase_clear_cache): New stub.
* exec.c: Fix function name indentation.
(expand_args): Simplify by using membuf functions.
(exec_write): Fix memory leak on error.
(w32_system): Use DETACHED_PROCESS so
that a new console is not created.
* configure.ac: Remove Camellia restriction.
* gpg.c (main), misc.c (openpgp_cipher_test_algo): Remove Camellia
restriction.
* misc.c (map_cipher_openpgp_to_gcry), main.h: Add macros for
openpgp_cipher_open, openpgp_cipher_get_algo_keylen, and
openpgp_cipher_get_algo_blklen to wrap around the corresponding gcry_*
functions, but pass the algorithm number through
map_cipher_openpgp_to_gcry. This is needed in case the gcry algorithm
number doesn't match the OpenPGP number (c.f. Camellia).
* encr-data.c, pubkey-enc.c, mainproc.c, cipher.c, encode.c, seskey.c,
passphrase.c, seckey-cert.c: Use new openpgp_cipher_* macros here.
(list_keyblock_print), pkclist.c (do_edit_ownertrust), keyedit.c
(menu_showphoto), photoid.c (generate_photo_id, show_photos), misc.c
(pct_expando): Add %v and %V expandos so that displaying photo IDs can
show the attribute validity tag (%v) and string (%V). Originally by
Daniel Gillmor.
* gpg.c (enum cmd_and_opt_values): New option
oEnableW32HandleTranslation.
(opts): New option --enable-w32-handle-translation.
(main): New variable w32_handle_translation to keep track of
option.
* gpg.c (main): New variable default_configname. Use it if
save_configname is NULL (can happen if default configfile does
not exist). Move default configname determination to ...
(get_default_configname): ... this new function.
the literals count.
* verify.c (verify_one_file), decrypt.c (decrypt_messages): Call it
here so we allow multiple literals in --multifile mode (in different
files - not concatenated together).
* call-agent.c (start_agent): Don't use log_error when using the
fallback hack to start the agent. This is bug 782.
scripts/
* mail-to-translators: Copied from 1.4. and adjusted.
tools/
* gpgconf-comp.c: Allow changing of --allow-mark-trusted.
* gpg-connect-agent.c (main): New option --decode and commands
decode and undecode.
(read_and_print_response): Implement option.
* keyserver.c: Windows Vista doesn't grok X_OK and so fails access()
tests. Previous versions interpreted X_OK as F_OK anyway, so we'll
just use F_OK directly.
* parse-packet.c (parse_signature): It's hex.
* getkey.c (merge_selfsigs_subkey): Avoid listing the contents of a
backsig when list mode is on. Noted by Timo Schulz.
* keyedit.c (keyedit_menu): If we modify the keyblock (via
fix_keyblock() or collapse_uids()) make sure we reprocess the
keyblock so the flags are correct. Noted by Robin H. Johnson.
* getkey.c (fixup_uidnode): Properly clear flags that don't apply
to us (revoked, expired) so that we can reprocess a uid.
g10/
* passphrase.c (passphrase_get): Set the cancel flag on all error
from the agent. Fixes a bug reported by Tom Duerbusch.
sm/
* gpgsm.c (main): Let --gen-key print a more informative error
message.
doc/
* com-certs.pem: Added the current root certifcates of D-Trust and
S-Trust.
g10/
* status.c (write_status_begin_signing): New.
* sign.c (sign_file, sign_symencrypt_file): Call it.
* textfilter.c (copy_clearsig_text): Call it.
* call-agent.c (agent_scd_pksign): Pass --hash-rmd160 to SCD if
required.
* gpg.c (main): Let --no-use-agent and --gpg-agent-info print a
warning.
* misc.c (obsolete_option): New.
* Makefile.am (gpg2_LDADD, gpgv2_LDADD): Replace -lassuan and
-lgpg-error with $(LIBASSUAN_LIBS) and $(GPG_ERROR_LIBS).
(AM_CFLAGS): Add $(LIBASSUAN_CFLAGS) and $(GPG_ERROR_CFLAGS).
char * vs. unsigned char * warnings. The GNU coding standards used to
say that these mismatches are okay and better than a bunch of casts.
Obviously this has changed now.
* kbxutil.c (i18n_init): Always use LC_ALL.
* gpgsm.c (i18n_init): Always use LC_ALL.
* certdump.c (gpgsm_format_name): Factored code out to ..
(gpgsm_format_name2): .. new.
(gpgsm_print_name): Factored code out to ..
(gpgsm_print_name2): .. new.
(print_dn_part): New arg TRANSLATE. Changed all callers.
(print_dn_parts): Ditto.
(gpgsm_format_keydesc): Do not translate the SUBJECT; we require
it to stay UTF-8 but we still want to filter out bad control
characters.
* gpgconf.c (i18n_init): Always use LC_ALL.
file.
(card_edit): Pass ARG_STRING to change_login.
(card_status): Print CA fingerprints.
(change_cafpr): New.
(card_edit): New command CAFPR.
* call-agent.h: Add members for CA fingerprints.
* call-agent.c (agent_release_card_info): Invalid them.
(learn_status_cb): Store them.
Introduce PACKAGE_GT and set it to gnupg2.
* gpg-agent.c (main): Use new libgcrypt thread library register
scheme.
* Makevars (DOMAIN): Init from PACKAGE_GT
* g10.c: New options --gpgconf-list, --debug-level and --log-file
(set_debug): Add arg DEBUG_LEVEL.
(main): Look at less and less version specific config files. From
gnupg 1.3.
* keygen.c (do_generate_keypair): Don't try to execute certain pieces of code
in case an error occured.
(gen_card_key): Don't print out a message, which is already
printed by do_generate_keypair().
(print_isoname): Ditto.
* trustdb.c (check_regexp): s/exp/expr/.
* keyedit.c (trustsig_prompt): Removed a "> 255" term; it is
always false due to the data type.
* passphrase.c (agent_get_passphrase): Use xasprintf and avoid
non-literal format strings.
* tdbio.c (upd_hashtable, drop_from_hashtable, lookup_hashtable):
Fixed log_error format string bugs. Kudos to the now working
gcc-3.3 -Wformat-nonliteral and Florian Weimer's investigations in
gnupg 1.2.3.
structure, so that it can indeed be updated.
* card-util.c (fpr_is_zero): New.
(generate_card_keys): New.
(card_edit): New command "generate".
* keygen.c (generate_keypair): New arg CARD_SERIALNO, removed call
to check_smartcard.
(check_smartcard,show_smartcard): Removed.
(show_sha1_fpr,fpr_is_zero): Removed.
* app-openpgp.c (do_getattr): Support SERIALNO and AID.
(list_keyblock_print): Use it here.
* card-util.c (toggle_forcesig): New.
(card_edit): New command "forcesig".
* card-util.c (print_name, print_isoname): Use 0 and not LF fro
the max_n arg of tty_print_utf8_string2.
* call-agent.c (agent_scd_getattr): New.
(learn_status_cb): Release values before assignment so that it can
be used by getattr to update the structure.
* card-util.c (change_pin): Simplified. We now have only a PIN
and an Admin PIN.
* card-util.c (card_status): Use tty_fprintf for all output.
(print_sha1_fpr, print_isoname): Ditto.
(get_one_name,change_name, change_url, change_login,change_lang)
(change_sex): New; taken from keygen.c.
* keygen.c (smartcard_get_one_name, smartcard_change_name)
(smartcard_change_url, smartcard_change_login_data)
(smartcard_change_lang, smartcard_change_sex): Removed.
(check_smartcard): Removed most menu items.
* misc.c (openpgp_pk_algo_usage): Allow AUTH where SIGN is allowed.
* keygen.c (ask_passphrase): No need to allocated S2K in secure
memory.
* scdaemon.c (main): --pcsc-driver again defaults to pcsclite.
David Corcoran was so kind to remove the GPL incompatible
advertisng clause from pcsclite.
* apdu.c (apdu_open_reader): Actually make pcsc-driver option work.
* scdaemon.c, scdaemon.h: New option --pcsc-ccid.
* ccid-driver.c, ccid-driver.h: New but far from being useful.
* Makefile.am: Add above.
* apdu.c: Add support for that ccid driver.
* encode.c (encode_sesskey): Checked the code and removed
the warning since all compatibility checks with PGP succeeded.
* mainproc.c (symkey_decrypt_sesskey): Better check for the
algorithm and check the return values of some functions.
(gpgsm_exit): Update the random seed file and enable debug output.
* g10.c (main): Add secmem features and set the random seed file.
(g10_exit): Update the random seed file.
* parse-packet.c (parse_signature,read_protected_v3_mpi)
(parse_key): Fixed use of mpi_set_opaque.
* keygen.c (gen_card_key): Ditto.
* card-util.c (card_status): New.
* call-agent.c (learn_status_cb): Parse more information.
* keylist.c (print_pubkey_info): Add FP arg for optinal printing
to a stream. Changed all callers.
* seskey.c (encode_session_key): Debug output of the session key.
* pubkey-enc.c (get_it): Handle card case.
* call-agent.c (agent_scd_pkdecrypt): New.
* pkglue.c (pk_encrypt): Add RSA support.
* g10.c (main): Default to --use-agent.
* keygen.c (show_smartcard): Print info about the public key.
(check_smartcard): Check for existing key here.
(gen_card_key): And not anymore here.
(fpr_is_zero): New.
(generate_keypair): Generate both keys for a card.
(smartcard_change_url): Nw.
* keygen.c (gen_card_key): Obviously we should use the creation
date received from SCDAEMON, so that the fingerprints will match.
* sign.c (do_sign): Pass the serialno to the sign code.
* keyid.c (serialno_and_fpr_from_sk): New.
to libgcrypt functions, using shared error codes from libgpg-error,
replacing the old functions we used to have in ../util by those in
../jnlib and ../common, renaming the malloc functions and a couple of
types. Note, that not all changes are listed below becuause they are
too similar and done at far too many places. As of today the code
builds using the current libgcrypt from CVS but it is very unlikely
that it actually works.
