* agent/command.c (cmd_preset_passphrase, pinentry_loopback): Use %zu
in format string.
* scd/ccid-driver.c (ccid_get_atr): Ditto.
* agent/command-ssh.c (stream_read_string): Init arg STRING_SIZE to
avoid maybe_unitialized warning.
--
Actually the first one might have been a problem on big endian
machines.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (pcsc_pinpad_verify, pcsc_pinpad_modify): Default value
of maxlen for pinpad input is now 15 (was: 25).
* scd/ccid-driver.c (ccid_transceive_secure): Likewise.
--
For newer PC/SC, it is better to use FEATURE_GET_TLV_PROPERTIES to get
bMaxPINSize.
* scd/ccid-driver.c (ccid_transceive_apdu_level): Support larger
APDU.
--
This is still ad hoc change, but it's OK. Supporting full extended
APDU exchange level is not worth yet.
* scd/ccid-driver.c: Add 2013.
(VENDER_VEGA, VEGA_ALPHA):New.
(ccid_transceive_secure): VEGA_ALPHA is same firmware as GEMPC_PINPAD.
Change bNumberMessage to 0x01, as it works better (was: 0xff).
* scd/iso7816.h (struct pininfo_s): Rename from iso7816_pininfo_s.
Change meaning of MODE.
(pininfo_t): Rename from iso7816_pininfo_t.
* scd/sc-copykeys.c: Include "iso7816.h".
* scd/scdaemon.c, scd/command.c: Likewise.
* scd/ccid-driver.c: Include "scdaemon.h" and "iso7816.h".
(ccid_transceive_secure): Follow the change of PININFO_T.
* scd/app.c: Include "apdu.h" after "iso7816.h".
* scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp)
(iso7816_change_reference_data_kp): Follow the change of API.
* scd/apdu.c (struct reader_table_s): Change API of CHECK_KEYPAD,
KEYPAD_VERIFY, KEYPAD_MODIFY to have arg of PININFO_T.
(check_pcsc_keypad, check_ccid_keypad): Likewise.
(apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise.
(pcsc_keypad_verify, pcsc_keypad_modify, ct_send_apdu)
(pcsc_send_apdu_direct, pcsc_send_apdu_wrapped, pcsc_send_apdu)
(send_apdu_ccid, ccid_keypad_operation, my_rapdu_send_apdu, send_apdu)
(send_le): Follow the change of API.
* scd/apdu.h (apdu_check_keypad, apdu_keypad_verify)
(apdu_keypad_modify): Change the API.
* scd/app-dinsig.c, scd/app-nks.c, scd/app-openpgp.c: Follow the
change.
* scd/ccid-driver.c (struct ccid_driver_s): Add auto_voltage,
auto_param, and auto_pps.
(parse_ccid_descriptor): Set auto_voltage, auto_param, and auto_pps.
Support non-autoconf readers.
(update_param_by_atr): New.
(ccid_get_atr): Use 5V for PowerOn when auto_voltage is not supported.
Use 0x10 when nonnull_nad for SetParameters.
Call update_param_by_atr for parsing ATR, and use param for
SetParameters.
Send PPS if reader requires it and card is negotiable.
When bNadValue in the return values of SetParameters == 0,
clear handle->nonnull_nad flag.
--
This change is to support more card readers by the internal driver.
Tested with 08e6:3478 Gemplus PinPad Smart Card Reader.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
* scd/apdu.c (ccid_keypad_operation): Rename from ccid_keypad_verify.
(open_ccid_reader): Use ccid_keypad_operation for verify and modify.
* scd/ccid-driver.c (VENDOR_VASCO, VASCO_920): New.
(ccid_transceive_apdu_level): Permit sending packet where
apdulen <= 289. Support receiving packets in a chain.
(ccid_transceive_secure): Maximum is 15 for VASCO DIGIPASS 920.
Support keypad_modify method such as CHANGE_REFERENCE_DATA: 0x24.
This is not a part of pin pad support series of mine.
As I found the bug while I am preparing the patches, I report this.
As CCID protocol is little endian, wLangId of US English = 0x0409
is represented as two bytes of 0x09 then 0x04.
It is really confusing that the code like following is floating
around:
pin_verify -> wLangId = HOST_TO_CCID_16(0x0904);
But, it is 0x0409 (not 0x0904). It is defined in the documentation:
http://www.usb.org/developers/docs/USB_LANGIDs.pdf
and origin of this table is Microsoft. We can see it at:
http://msdn.microsoft.com/en-us/library/bb165625%28VS.80%29.aspx
Yes, it would be better not to hard-code 0x0409. It would be better
to try current locale of the user, or to use the first entry of string
descriptor. I don't have time to implement such a thing...
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
progress_cb and progress_cb_arg.
(ccid_set_progress_cb): New.
(print_progress): New.
(ccid_transceive): Call print_progress for wait time extensions.
* apdu.c (struct reader_table_s): Add field set_progress_cb.
(new_reader_slot): Clear that field.
(open_ccid_reader): Set it to ..
(set_progress_cb_ccid_reader): ... new fucntion.
* app.c (print_progress_line): New.
(lock_reader): Add arg CTRL to set a progress callback and
change all callers to provide it.
(unlock_reader): Remove the progress callback.
g10/
* passphrase.c (passphrase_get): Set the cancel flag on all error
from the agent. Fixes a bug reported by Tom Duerbusch.
sm/
* gpgsm.c (main): Let --gen-key print a more informative error
message.
char * vs. unsigned char * warnings. The GNU coding standards used to
say that these mismatches are okay and better than a bunch of casts.
Obviously this has changed now.
good.
(do_close_reader): Never do a reset. The caller should instead
make sure that the reader has been closed properly. The new retry
code in ccid_slot_status will make sure that the readersatrts up
fine even if the last process didn't closed the USB connection
properly.
(ccid_get_atr): For certain readers try switching to ISO mode.
Thanks to Ludovic Rousseau for this hint and the magic numbers.
(print_command_failed): New.
(bulk_in): Use it here. Add new arg NO_DEBUG.
(show_file): Implement it.
* keyformat.txt: Define the created-at attribute for keys.
* ccid-driver.c: Replaced macro DEBUG_T1 by a new debug level.
(parse_ccid_descriptor): Mark SCR335 firmware version 5.18 good.
(ccid_transceive): Arghhh. The seqno is another bit in the
R-block than in the I block, this was wrong at one place.
* scdaemon.c: New options --debug-ccid-driver and
--debug-disable-ticker.
* app-openpgp.c (do_genkey, do_writekey): Factored code to check
for existing key out into ..
(does_key_exist): .. New function.
* gpg-connect-agent.c (add_definq, show_definq, clear_definq)
(handle_inquire): New.
(read_and_print_response): Handle INQUIRE command.
(main): Implement control commands.
* gpgsm.c: New options --{enable,disable}-trusted-cert-crl-check.
* certchain.c (gpgsm_validate_chain): Make use of it.
* certchain.c (gpgsm_validate_chain): Check revocations even for
expired certificates. This is required because on signature
verification an expired key is fine whereas a revoked one is not.
* gpgconf-comp.c: Add gpgsm option disable-trusted-cert-crl-check.
(scan_or_find_devices): Add new args to return endpoint info and
interface number.
(ccid_open_reader, ccid_shutdown_reader): Take care of these new
args.
(bulk_in, bulk_out): Use the correct endpoints.
(ccid_transceive_apdu_level): New.
(ccid_transceive): Divert to above.
(parse_ccid_descriptor): Allow APDU level exchange mode.
stable version 0.1.x.
* scdaemon.texi (Card applications): New section.
* scdaemon.c (main): New option --disable-application.
* app.c (is_app_allowed): New.
(select_application): Use it to check for disabled applications.
* ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New.
* ccid-driver.c (ccid_open_reader): Support the stable 0.1 version
of libusb.
(ccid_get_atr): Handle short messages.
* apdu.c (my_rapdu_get_status): Implemented.
(apdu_close_reader, apdu_get_status, apdu_activate)
(send_apdu): Make use of them.
(new_reader_slot): Intialize them to NULL.
(dump_ccid_reader_status, ct_dump_reader_status): New.
(dump_pcsc_reader_status): New.
(open_ct_reader, open_pcsc_reader, open_ccid_reader)
(open_osc_reader, open_rapdu_reader): Intialize function pointers.
(ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu)
(error_string): Removed. Replaced by apdu_strerror.
(get_ccid_error_string): Removed.
(ct_activate_card): Remove the unused loop.
(reset_ct_reader): Implemented.
(ct_send_apdu): Activate the card if not yet done.
(pcsc_send_apdu): Ditto.
* app-help.c (app_help_read_length_of_cert): Fixed calculation of
R_CERTOFF.
* pcsc-wrapper.c: New.
* Makefile.am (pkglib_PROGRAMS): Install it here.
* apdu.c (writen, readn): New.
(open_pcsc_reader, pcsc_send_apdu, close_pcsc_reader): Use the
pcsc-wrapper if we are using Pth.
(apdu_send_le): Reinitialize RESULTLEN. Handle SW_EOF_REACHED
like SW_SUCCESS.
* Makefile.am (pkglib_PROGRAMS): Install it here.
* apdu.c (writen, readn): New.
(open_pcsc_reader, pcsc_send_apdu, close_pcsc_reader): Use the
pcsc-wrapper if we are using Pth.
* misc.c (openpgp_pk_algo_usage): Allow AUTH where SIGN is allowed.
* keygen.c (ask_passphrase): No need to allocated S2K in secure
memory.
* scdaemon.c (main): --pcsc-driver again defaults to pcsclite.
David Corcoran was so kind to remove the GPL incompatible
advertisng clause from pcsclite.
* apdu.c (apdu_open_reader): Actually make pcsc-driver option work.
* scdaemon.c, scdaemon.h: New option --pcsc-ccid.
* ccid-driver.c, ccid-driver.h: New but far from being useful.
* Makefile.am: Add above.
* apdu.c: Add support for that ccid driver.
