* configure.ac (TEST_LIBTSS): Make that conditional depend on the
detection of tssstartup.
--
While the tpm2d daemon can use either the Intel TSS or the IBM TSS,
the test code (specifically, the start_sw_tpm.sh script) requires
some tools from the IBM TSS (tssstartup and tsspowerup).
If a software TPM is detected at configure time but the IBM TSS
tools are absent (e.g. because only the Intel TSS is available on
the system), `make check` will attempt to run the tpm2d tests and
those will fail when the start_sw_tpm.sh script is launched.
This patch makes running the tpm2d tests dependent not only on
the detection of a software TPM, but also on the detection of
tssstartup (it is probably safe to assume that if tssstartup is
present, then tsspowerup is available as well).
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* tests/tpm2dtests/start_sw_tpm.sh: New.
* tests/tpm2dtests/Makefile.am: Add.
--
This accidentally got left out of the initial commit for testing
6720f1343 ("tpm2d: add tests for the tpm2daemon")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Added to Makefile and wrote tiny ChangeLog.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (struct app_local_s): Add ecc.algo field.
(send_key_attr): Use ecc.algo field.
(ecc_read_pubkey): Use ecc.algo field.
(ecc_writekey): Ed448 means EdDSA.
(parse_algorithm_attribute): Set ecc.algo field from card.
Add checking for Ed25519 for ECC_FLAG_DJB_TWEAK flag.
--
There used to be a possible support of Ed25519 with ECDSA, (instead of
EdDSA). To distinguish key for Ed25519 for EdDSA, we use the
flag: (flags eddsa). Ed448 has no support for ECDSA and defaults to
EdDSA even if no such flag.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
common/openpgp-oid.c (oidtable): Ed448 uses 456-bit signature.
--
While the curve itself is 448-bit, the signature size is 456-bit.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
The tpm2d patches introduced a new --edit-key command: keytotpm. Add
a descriptive entry explaining what it does and how it works.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* scd/scdaemon.h (opt): Add field opcsc_shared.
* scd/scdaemon.c (opcscShared): New.
(opts): Add "--pcsc-shared".
(main): Set flag.
* scd/apdu.c (connect_pcsc_card): Use it.
(pcsc_get_status): Take flag in account.
* scd/app-openpgp.c (cache_pin): Bypass in shared mode.
(verify_chv2: Do not auto verify chv1 in shared mode.
* scd/app-piv.c (cache_pin): By pass caceh in shared mode.
--
This option should in general not be used. The patch tries to limit
bad effects but using shared mode is somewhat dangerous depending on
the other PC/SC users.
* scd/app-piv.c (app_select_piv): Allow for full AID.
--
It appears that SP-800-73-x is not too clear about the format of these
objects. Many current cards (such as the Yubikey 5 series) apparently
have only the PIX in DO 0x4F and only the RID in object 0x79/0x4F.
However, other cards as well as the PivApplet Javacard applet have the
full AID in 0x4F (which actually seems closer to what the standard
says). PivApplet also has the full AID in 0x79/0x4F, but this is
probably incorrect. (Here is a long discussion of the matter from an
OpenSC author:
https://github.com/arekinath/PivApplet/issues/43#issuecomment-772649709)
[Taken from a mail to gnupg-devel date 2021-02-03.]
Signed-off-by: Werner Koch <wk@gnupg.org>
--
This is based on a patch by
Co-authored-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
Co-authored-by: Todd Zullinger <tmz@pobox.com>
regarding Libassuan sent to gnupg-devel on 2018-02-02
* g10/gpg.c (oForceSignKey,opts): New option "--force-sign-key".
(main): Set it.
* g10/options.h (opt): New flag flags.force_sign_key.
* g10/keyedit.c (sign_uids): Use new flag.
--
GnuPG-bug-id: 4584
* configure.ac: Check for Intel TSS.
* tpm2d/intel-tss.h: New.
* tpm2d/tpm2.h (HAVE_INTEL_TSS): Use the Intel code.
--
The Intel TSS is somewhat of a moving target, so this wraps support
for this TSS into tpm2daemon. Unfortunately this wrapper uses some
APIs that are only present in a relatively recent Intel TSS, so it
looks like it will only work with version 2.4.0 or higher.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
- Add header blurb; see previous patch.
- Add new file to the Makefile
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Detect TPM emulator and enable tests.
* tests/tpm2dtests/: New test suite.
* tests/Makefile.am: Run tests.
--
Add a set of tests that exercise tpm2daemon handling of keys and
verify compatibility with non-tpm based keys.
Running this test infrastructure requires a tpm emulator, which is
tested for during configuration. If an emulator is not found, the
tests won't be run since they require the presence of a TPM (although
the TPM handling code will still be built).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
- Fixed tests/Makefile.am for make distcheck.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_keytotpm): New.
(agent/command.c): Register new command KEYTOTPM.
* g10/call-agent.c (agent_keytotpm): New.
* g10/keyedit.c (cmdKEYTOTPM): New command "keytotpm".
(keyedit_menu): Implement.
--
The plumbing is done in two parts: the agent is modified to understand
a KEYTOTPM assuan command taking the key grip as an argument. This
simply obtains the key s expression and calls the existing writeky
diversion to the tpm2daemon. The daemon reponds with the TPM
conversion of the key and that key is then stored in the keyfile as a
shadowed-private-key with "tpm2-v1" type.
To effect the conversion, all the user does from gpg --edit-key is
select which private key they wish to move (or move the primary if no
key is selected) and type keytotpm. The conversion to TPM form is
instantaneous and once converted, the actual key cannot be recovered,
meaning that if you want your gpg key to move to a new laptop you must
keep an unconverted backup copy in a safe location.
When you do a list command, all TPM keys show up as
card-no: TPM-Protected
The key is stored encrypted to the TPM2 storage seed and since each
TPM has a unique seed, only the single TPM contained in your laptop
can now read the key. This means you cannot simply copy the shadowed
key file over to a new laptop, you must copy over the backup copy and
then convert it to TPM form on the new laptop.
To decomission your laptop, execute a tssclear command which
regenerates the storage seed and effectively shreds all keys. Note
when you have done this *every* TPM2 shadowed private key becomes
unreadable by any TPM and all are effectively destroyed.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Very minor cosmetic changes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-tpm2d.c: New.
* divert-tpm2.c: New.
* agent/Makefile.am: Add new files.
* agent/agent.h (DAEMON_TPM2D): New. Add stub fucntions.
* agent/call-daemon.c (GNUPG_MODULE_NAME_TPM2DAEMON): New.
* agent/command.c (do_one_keyinfo): Handle tpmv2.
* agent/gpg-agent.c (oTpm2daemonProgram): New.
(opts): New option --tpm2daemon-program.
(parse_rereadable_options): Handle option.
* agent/pkdecrypt.c (agent_pkdecrypt): Divert to tpm2d.
(agent_pksign_do): Ditto.
---
A new shadow key type: "tpm2-v1" is introduced signalling that the
shadowed key is handled by the tpm2daemon. A function to identify
this type is introduced and diversions to the tpm2daemon functions are
conditioned on this function for pkign and pkdecrypt where the same
diversions to scd are currently done. The (info) field of the
shadowed key stores the actual TPM key. The TPM key is encrypted so
only the physical TPM it was created on can read it (so no special
protection is required for the info filed), but if the (info) field
becomes corrupt or damaged, the key will be lost (unlike the token
case, where the key is actually moved inside the token).
Note, this commit adds handling for existing TPM format shadow keys,
but there is still no way to create them.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Additional changes:
* Add ChangeLog entries.
* Some minor indentation fixes.
* agent/Makefile.am (gpg_agent_SOURCES): Change to make distcheck
work.
* agent/agent.h [!HAVE_LIBTSS]: Do not return -EINVAL but an
gpg_error_t. Mark args as unused.
* agent/protect.c (agent_is_tpm2_key): Free BUF.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tpm2d: New directory.
* Makefile.am (SUBDIRS): Add directory.
* configure.ac: Detect libtss and decide whether to build tpm2d.
* am/cmacros.am: Add a define.
* util.h (GNUPG_MODULE_NAME_TPM2DAEMON): New.
* common/homedir.c (gnupg_module_name): Add tpm2d.
* common/mapstrings.c (macros): Add "TPM2DAEMON".
* tools/gpgconf.h (GC_COMPONENT_TPM2DAEMON): New.
* tools/gpgconf-comp.c (known_options_tpm2daemon): New.
(gc_component): Add TPM2.
(tpm2daemon_runtime_change): New.
* tpm2d/Makefile.am: New.
* tpm2d/command.c: New.
* tpm2d/ibm-tss.h: New.
* tpm2d/tpm2.c: New.
* tpm2d/tpm2.h: New.
* tpm2d/tpm2daemon.c: New.
* tpm2d/tpm2daemon.h: New.
---
This commit adds and plumbs in a tpm2daemon to the build to mirror the
operation of scdaemon. The architecture of the code is that
tpm2daemon.c itself is pretty much a clone of scd/scdaemon.c just with
updated function prefixes (this argues there could be some further
consolidation of the daemon handling code). Note that although this
commit causes the daemon to be built and installed, nothing actually
starts it or uses it yet.
Command handling
----------------
command.c is copied from the command handler in scd.c except that the
command implementation is now done in terms of tpm2 commands and the
wire protocol is far simpler. The tpm2daemon only responds to 4
commands
IMPORT: import a standard s-expression private key and export it to
TPM2 format. This conversion cannot be undone and the
private key now can *only* be used by the TPM2. To anyone
who gets hold of the private key now, it's just an
encrypted binary blob.
PKSIGN: create a signature from the tpm2 key. The TPM2 form private
key is retrieved by KEYDATA and the hash to be signed by
EXTRA. Note there is no hash specifier because the tpm2
tss deduces the hash type from the length of the EXTRA
data. This is actually a limitation of the tpm2 command
API and it will be interesting to see how this fares if the
tpm2 ever supports say sha3-256 hashes.
PKDECRYPT: decrypt (RSA case) or derive (ECC case) a symmetric key.
The tpm2 for private key is retrieved by KEYDATA and the
information used to create the symmetric key by EXTRA.
KILLTPM2D: stop the daemon
All the tpm2 primitives used by command.c are in tpm2.h and all the
tpm2 specific gunk is confined to tpm2.c, which is the only piece of
this that actually does calls into the tss library.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Changes from James' patch:
- gpgconf: The displayed name is "TPM" and not "TPM2". That
string is used by GUIs and should be something the user
understands. For example we also use "network" instead
of "Dirmngr".
- Removed some commented includes.
- Use 16 as emulation of GPG_ERR_SOURCE_TPM2.
- Silenced a C90 compiler warning and flags unused parameters.
- Removed "if HAVE_LIBS" from tpm2/Makefile.am and add missing
files so that make distcheck works.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (struct gpgusage_flags_s): New.
(struct prkdf_object_s): Add field gpgusage.
(struct app_local_s): Add field any_gpgusage.
(dump_gpgusage_flags): New.
(read_p15_info): Parse athe gpgusage flags.
(do_getattr): Take care of the gpgusage flags.
--
This features allows to mark keys to be used for OpenPGP. This is
done by putting additional extended key infos into the certificate
stored on the cards. Only if any such extended key usage is detected
for a stored certificate this new mode chimes in.
This feature gives the card issuer a high flexibility on how to make
sure certain keys are used with OpenPGP.
* sm/gpgsm.c: Include npth.h.
(main): Init nPth.
--
Actually we currently do not use extra threads but we need to link to
the npth version of the common functions because there is an option to
use threads. Now, without initialized npth, we could experience a
crash in gnupg_sleep, which uses npth_usleep in the npth based common
functions.
Fixes-commit: 046f419f806036248c058c4bd44368f8596287b7
* agent/call-daemon.c (struct wait_child_thread_parm_s) [W32]: Do not
use HANDLE for pid_t.
(wait_child_thread): Ditto.
--
Mingw has its own definition of pid_t as does libassuan. We should use
this instead of using HANDLE. Things are a bit complicated in
Windows, because Windows also has a pid_t but that is mostly useless;
in particular because you can't wait on a real pid but need a handle.
* common/exechelp-w32.c (gnupg_spawn_process): Change to use
CreateProcessW.
(gnupg_spawn_process_fd): Ditto.
(gnupg_spawn_process_detached): Ditto.
* g10/exec.c (w32_system): Ditto.
--
GnuPG-bug-id: 4398
We do not use this weirdo CREATE_UNICODE_ENVIRONMENT flag because it
does not make any sense to have non-ASCII names in the environment. I
can't imagine why this should be used at all and rationale for this
API features is, well, sparse.
* common/init.c (_init_common_subsystems) [W32]: Set the codepage to
UTF-8 for input and putput. Switch gettext to UTF-8.
* tools/gpgconf.c (main): Display the input and output codepage if
they differ.
* g10/gpg.c (utf8_strings) [W32]: Make sure this is always set.
--
With this patch the former patch to use ReadConsoleW and WriteConsoleW
in ttyio.c are kind of superfluous because the ANSI version of these
functions are also able to read/write UTF-8 directly given the console
code page has been set correctly. However, this seems to work only
with recent versions of Windows-10.
GnuPG-bug-id: 4365
* common/ttyio.c (do_get) [W32]: Use ReadConsoleW.
(w32_write_console): New.
(tty_printf, tty_fprintf) [W32]: Use new function.
--
Note that due this change fixed stings (i.e. gettext translations)
printed to the console will not be rendered correctly unless "chcp
65001" has been used. This needs to be fixed by followup patch.
GnuPG-bug-id: 4365
* common/w32-misc.c [W32]: Include windows.h
(struct add_arg_s): New.
(add_arg): New.
(glob_arg): New.
(parse_cmdstring): Add arg argvflags and set it.
(w32_parse_commandline): Add arg r_itemsalloced. Add globing.
* common/init.c (prepare_w32_commandline): Mark glob created items as
leaked.
* common/t-w32-cmdline.c : Include windows.h
(test_all): Add simple glob test for Unix.
(main): Add manual test mode for Windows.
--
GnuPG-bug-id: 4398
* common/t-w32-cmdline.c (test_all): Add new test cases.
* common/w32-misc.c (strip_one_arg): Add arg endquote.
(parse_cmdstring): Take care of backslashes in quotes.
--
I found some new test vectors from Microsoft.
* g10/gpg.c (_dowildcard): Remove.
(my_strusage): Enable wildcards using our new system.
--
This patch actually removes the current globing using a mingw
feature. We are not able to use this because it does not handle
Unicode filenames. The plan is to implement this in init.c. This
patch merely configures gpg to request globing.
GnuPG-bug-id: 4398
* common/w32-misc.c: New.
* common/t-w32-cmdline.c: New.
* common/init.c: Include w32help.h.
(prepare_w32_commandline): New.
(_init_common_subsystems) [W32]: Call prepare_w32_commandline.
* common/Makefile.am (common_sources) [W32]: Add w32-misc.c
(module_tests): Add t-w32-cmdline
(t_w32_cmdline_LDADD): New.
--
The rules for the command line parser are not cleary specified - if at
all. See the comment in t-w32-cmdline.c.
We can't use the mingw version because that would require to change
all argv handling to be wchar_t and that only for Windows. That would
be too ugly. Parsing the command line into argv by us is much easier
and we can do that only if needed - i.e. if globing is required (we
are prepared for this) or a non-ASCII character has been encountered.
This way we keep things stable and only fix the currently not working
Unicode problem.
GnuPG-bug-id: 4398
* g10/photoid.c (get_default_photo_command): Change parameter for
xdg-open.
--
xdg-open spawns the user's preferred image viewer and then exits.
Therefore we must not remove the temp file when it exits,
otherwise by the time the actual image viewer is started the file
doesn't exist any more.
Signed-off-by: Nicolas Fella <nicolas.fella@gmx.de>
--
GnuPG-bug-id: 4777
This also fixes a bad fuzzy translation which accidently had been
commited without realizing that there was indeed a change (from
"... GnuPG" to "... %s").
* scd/app-p15.c (struct keyaccess_flags_s): New.
(struct prkdf_object_s): Add field accessflags.
(dump_keyusage_flags): New.
(dump_keyaccess_flags): New.
(parse_keyaccess_flags): New.
(parse_common_key_attr): Return access flags.
(read_ef_prkdf): Parse the access flags. Allow for ECkeys.
(read_ef_pukdf): Ditto. Use new functions for printing.
(read_p15_info): Use new fucntion for printing.
