* agent/divert-scd.c (divert_pkdecrypt): Skip a flags parameter.
--
The libgcrypt docs say that a "flags" parameter should always be used
in the input of pkdecrypt. Thus we should allow that parameter also
when parsing an s-expression to figure out the algorithm for use with
scdaemon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (watch_sock): New.
(do_getpin): Spawn the watching thread.
--
While we don't have npth_cancel (and it's difficult to implement it
correctly), this is a kind of best compromise allowing a thread's
polling when pinentry is active.
GnuPG-bug-id: 2011
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/agent.h (PINENTRY_STATUS_*): Expose to public.
(struct pin_entry_info_s): Add status.
* agent/call-pinentry.c (agent_askpin): Clearing the ->status
before the loop, let the assuan_transact set ->status. When
failure with PINENTRY_STATUS_PASSWORD_FROM_CACHE, it returns
soon.
* agent/findkey.c (unprotect): Clear the pinentry cache,
when it causes an error.
--
GnuPG-bug-id: 4348
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/passphrase.c (encode_s2k_iterations): Move function to ...
* common/openpgp-s2k.c: new file. Remove default intialization code.
* common/openpgpdefs.h (S2K_DECODE_COUNT): New to keep only one copy.
* g10/call-agent.c (agent_get_s2k_count): Change to return the count
and print an error.
* agent/protect.c: Include openpgpdefs.h
* g10/card-util.c (gen_kdf_data): Adjust for changes
* g10/gpgcompose.c: Include call-agent.h.
(sk_esk): Adjust for changes.
* g10/passphrase (passphrase_to_dek): Adjust for changes.
* g10/main.h (S2K_DECODE_COUNT): Remove macro.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/percent.c (percent_data_escape): Add new args prefix and
plus_escape.
* agent/command.c (cmd_put_secret): Adjust for changed function
* common/t-percent.c (test_percent_data_escape): Extend test for the
prefix.
(test_percent_data_escape_plus): new test for the plus escaping.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (struct ssh_key_type_spec): Add field
alt_curve_name.
(ssh_key_types): Add some alternate curve names.
(ssh_identifier_from_curve_name): Lookup also bey alternative names
and return the canonical name.
(ssh_key_to_blob): Simplify the ECDSA case by using gcry_pk_get_curve
instead of the explicit mapping.
(ssh_receive_key): Likewise. Use ssh_identifier_from_curve_name to
validate the curve name. Remove the reverse mapping because since
GnuPG-2.2 Libgcrypt 1.7 is required.
(ssh_handler_request_identities): Log an error message.
--
This change will make it easier to support other curves, in particular
those from tokens. Libgcrypt has a large list of alias names which we
now use to to make the mapping more flexible.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/protect.c (s2k_calibration_time): New file global var.
(calibrate_s2k_count): Use it here.
(get_calibrated_s2k_count): Replace function static var by ...
(s2k_calibrated_count): new file global var.
(set_s2k_calibration_time): New function.
* agent/gpg-agent.c (oS2KCalibration): New const.
(opts): New option --s2k-calibration.
(parse_rereadable_options): Parse that option.
--
Note that using an unrelistic high value (like 60000) takes quite some
time for calibration.
GnuPG-bug-id: 3399
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-scd.c (unlock_scd): Move lock before accessing IN_USE.
(wait_child_thread): Add log_info for Windows, and fixed log_error
message.
--
The old code is still valid with cooperate threads, but this is
better.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/call-pinentry.c (agent_popup_message_stop): Just kill it.
--
By checking if it's alive or not, we can lower a risk of sending
SIGINT to a wrong process on unusual condition when PID is re-used to
a different process.
That's true, however, since it's alive usually, simply sending SIGINT
is enough here.
Note that here is a race condition for detecting if process is active
or not; A process can die just after being detected alive.
Moreover, when the process of pinentry accidentally died already, it
should have caused return of assuan_transact and the thread of
popup_message_thread likely already set popup_finished=1.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command-ssh.c (get_client_info): Turn client_uid into an int.
Fix setting of it in case of a failed getsocketopt.
* agent/command.c (start_command_handler): Fix setting of the pid and
uid for Windows.
--
Fixes-commit: 28aa689058
which obviously was only added to master.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/divert-scd.c (getpin_cb): Support --ack option.
--
We are now introducing "acknowledge button" feature to scdaemon,
so that we can support OpenPGPcard User Interaction Flag.
We will (re)use the mechanism of POPUPPINPADPROMPT for this. Perhaps,
we will change the name of POPUPPINPADPROMPT, since it will be no
longer for PINPAD only.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/call-pinentry.c (initialize_module_call_pinentry): It's an
error when npth_mutex_init returns non-zero.
--
Actually, initialize_module_call_pinentry is only called once from
main. So, this bug had no harm and having the static variable
INITIALIZED is not needed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/agent.h (CACHE_MODE_DATA): New const.
* agent/cache.c (DEF_CACHE_TTL_DATA): new.
(housekeeping): Tweak for CACHE_MODE_DATA.
(cache_mode_equal): Ditto.
(agent_get_cache): Ditto.
(agent_put_cache): Implement CACHE_MODE_DATA.
* agent/command.c (MAXLEN_PUT_SECRET): New.
(parse_ttl): New.
(cmd_get_secret): New.
(cmd_put_secret): New.
(register_commands): Register new commands.
--
These commands allow to store secrets in memory for the lifetime of
the gpg-agent process.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (start_command_handler): Do not write to
CLIENT_CREDS after an error.
--
assuan_get_peercred is special insofar that it returns a pointer into
CTX. Writing data via this pointer should never be done.
Fixes-commit: 28aa689058
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (agent_copy_startup_env): Replace explicit list
with the standard list.
--
Although the function agent_copy_startup_env is newer than
session_env_list_stdenvnames the latter was not used. When
DBUS_SESSION_BUS_ADDRESS was added to the latter it was forgotten to
add it to the former as well. Having all stdnames here seems to be
the Right Thing (tm) to do.
GnuPG-bug-id: 3947
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_getinfo): Add sub-command getenv.
* dirmngr/server.c (cmd_getinfo): Ditto.
--
It is sometimes helpful to be able to inspect certain envvars in a
running agent. For example "http_proxy".
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (ssh_handler_sign_request): if a flag is passed
during an signature request that we do not know how to apply, return
GPG_ERR_UNKNOWN_OPTION.
--
https://tools.ietf.org/html/draft-miller-ssh-agent-02#section-4.5 says:
If the agent does not support the requested flags, or is otherwise
unable or unwilling to generate the signature (e.g. because it
doesn't have the specified key, or the user refused confirmation of a
constrained key), it must reply with a SSH_AGENT_FAILURE message.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
GnuPG-bug-id: 3880
* agent/command-ssh.c: repoint documentation reference.
--
Damien Miller is now documenting the ssh-agent protocol via the IETF.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/cache.c (agent_put_cache): Add arg 'ctrl' and change all
callers to pass it.
(agent_get_cache): Ditto.
* agent/cache.c (struct cache_items_s): Add field 'restricted'.
(housekeeping): Adjust debug output.
(agent_flush_cache): Ditto.
(agent_put_cache): Ditto. Take RESTRICTED into account.
(agent_get_cache): Ditto.
--
If requests are coming from different sources they should not share the
same cache. This way we make sure that a Pinentry pops up for a
remote request to a key we have already used locally.
GnuPG-bug-id: 3858
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/shareddefs.h (request_origin_t): New.
* common/agent-opt.c (parse_request_origin): New.
(str_request_origin): New.
* agent/command.c (option_handler): Implement new option.
--
This allows to pretend that a request originated from the extra or
browser socket.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cache.c (agent_cache_housekeeping): New func.
* agent/gpg-agent.c (handle_tick): Call it.
--
This change mitigates the risk of having cached items in a post mortem
dump.
GnuPG-bug-id: 3829
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp2.c (vprint_assuan_status_strings): New.
(print_assuan_status_strings): New.
* agent/command.c (agent_write_status): Replace by call to new
function.
* dirmngr/server.c (dirmngr_status): Ditto.
* g13/server.c (g13_status): Ditto.
* g13/sh-cmd.c (g13_status): Ditto.
* sm/server.c (gpgsm_status2): Ditto.
* scd/command.c (send_status_info): Bump up N.
--
This fixes a potential overflow if LFs are passed to the status
string functions. This is actually not the case and would be wrong
because neither the truncating in libassuan or our escaping is not the
Right Thing. In any case the functions need to be more robust and
comply to the promised interface. Thus the code has been factored out
to a helper function and N has been bumped up correctly and checked in
all cases.
For some uses this changes the behaviour in the error case (i.e. CR or
LF passed): It will now always be C-escaped and not passed to
libassuan which would truncate the line at the first LF.
Reported-by: private_pers
* agent/command-ssh.c (get_client_info): Use LOCAL_PEERCRED.
--
LOCAL_PEERUID was wrong (while there is LOCAL_PEERUUID).
For FreeBSD and macOS, we can use LOCAL_PEERCRED to get uid.
GnuPG-bug-id: 3757
Fixes-commit: 28aa689058
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* configure.ac: Check ucred.h as well as sys/ucred.h.
* agent/command-ssh.c: Add inclusion of ucred.h.
--
It was T2981, adding ucred.h for Solaris. We also need sys/ucred.h
for FreeBSD and macOS.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/gpg-agent.c (oListenBacklog): New const.
(opts): New option --listen-backlog.
(listen_backlog): New var.
(main): Parse new options.
(create_server_socket): Use var instead of 5.
* dirmngr/dirmngr.c: Likewise.
* scd/scdaemon.c: Likewise.
--
GnuPG-bug-id: 3473
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (initialize_modules): Add hook again.
(main): Remove setting of the system houk but add scoket system hook
setting after assuan initialization.
--
Thread initialization is better to be deferred after fork (in case of
UNIX). assuan_sock_init should be earlier. Thus, we need to change
system hooks for assuan_sock_* interface. Or else, on Windows, it may
cause hang on server.
Updates-commit: 1524ba9656
GnuPG-bug-id: 3378
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (initialize_modules): Move assuan_set_system_hooks.
(main): ... here, just before assuan_sock_init.
--
In Assuan, global variable SOCK_CTX is used internally, which is
initialized by assuan_sock_init. When initialized, system hooks
are copied into SOCK_CTX structure. Thus, system hooks should
be set, before the call of assuan_sock_init.
GnuPG-bug-id: 3378
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/logging.c: Do not build any code if we can use the gpgrt_log
functions.
(log_logv_with_prefix): Rename to log_logv_prefix and change order of
args so that this function matches its printf like counterpart
gpgrt_logv_prefix. Change all callers.
(log_debug_with_string): Rename to log_debug_string. Change all
callers.
(log_printhex): Move first arg to end so that this function matches
its printf like counterpart gpgrt_log_printhex. Change all callers.
* common/logging.h: Divert to gpgrt/libgpg-error if we can use the
gpgrt_log functions.
(bug_at): Add inline versions if we can use the gpgrt_log functions.
* configure.ac (GPGRT_ENABLE_LOG_MACROS): Add to AH_BOTTOM.
(mycflags): Add -Wno-format-zero-length.
--
This patch enables the use of the log function from libgpgrt (aka
libgpg-error). Instead of checking a version number, we enable them
depending on macros set by recent gpg-error versions. Eventually the
whole divert stuff can be removed.
The -Wno-format-zero-length is required because log_printhex can be
called with an empty format string. Note that this is fully specified
standard C behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oAutoExpandSecmem): New enum value.
(opts): New option --auto-expand-secmem.
(main): Implement that option.
--
Note that this option has an effect only if Libgcrypt >= 1.8.2 is
used.
GnuPG-bug-id: 3530
* agent/gpg-agent.c (handle_connections): Always check inotify fds.
--
I noticed a gpg-agent processed, probably in shutdown_pending state,
which was selecting on only these two inotify fds. The select
returned immediately but because we did not handle the fds in
shutdown_pending state they were not read and the next select call
returned one of them immediately again. Actually that should not
hanppen because the
if (active_connections == 0)
break; /* ready */
should have terminated the loop. For unknown reasons (maybe be just a
connection thread terminated in a gdb session) that did not happen.
By moving the check outside of the shutdown_pending condition and
closing the fd after they have been triggered the code should be more
robust.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 5d83eb9226)
* agent/protect.c (calibrate_get_time): Use clock or clock_gettime.
--
For calibration, clock(3) is better than times(3) among UNIXen.
Tested on NetBSD 7.1 and FreeBSD 11.1, using QEMU.
Thanks to Damien Goutte-Gattat for the information of use of
CLOCKS_PER_SEC; The old code with times(3) is not 100% correct,
in terms of POSIX. It should have used sysconf (_SC_CLK_TCK) instead
of CLOCKS_PER_SEC. CLOCKS_PER_SEC is specifically for clock(3).
GnuPG-bug-id: 3056, 3276, 3472
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 380bce13d9)
* agent/gpg-agent.c (handle_connections): Always check inotify fds.
--
I noticed a gpg-agent processed, probably in shutdown_pending state,
which was selecting on only these two inotify fds. The select
returned immediately but because we did not handle the fds in
shutdown_pending state they were not read and the next select call
returned one of them immediately again. Actually that should not
hanppen because the
if (active_connections == 0)
break; /* ready */
should have terminated the loop. For unknown reasons (maybe be just a
connection thread terminated in a gdb session) that did not happen.
By moving the check outside of the shutdown_pending condition and
closing the fd after they have been triggered the code should be more
robust.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/protect.c (calibrate_get_time): Use clock or clock_gettime.
--
For calibration, clock(3) is better than times(3) among UNIXen.
Tested on NetBSD 7.1 and FreeBSD 11.1, using QEMU.
Thanks to Damien Goutte-Gattat for the information of use of
CLOCKS_PER_SEC; The old code with times(3) is not 100% correct,
in terms of POSIX. It should have used sysconf (_SC_CLK_TCK) instead
of CLOCKS_PER_SEC. CLOCKS_PER_SEC is specifically for clock(3).
GnuPG-bug-id: 3056, 3276, 3472
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_getinfo): New sub-commands.
* agent/protect.c (get_standard_s2k_count): Factor some code out to ...
(get_calibrated_s2k_count): new.
(get_standard_s2k_time): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 52d41c8b0f)
* agent/agent.h (opt): New field 's2k_count'.
* agent/gpg-agent.c (oS2KCount): New enum value.
(opts): New option --s2k-count.
(parse_rereadable_options): Set opt.s2k_count.
--
This option is useful to speed up the starting of gpg-agent and in
cases where the auto-calibration runs into problems due to a broken
time measurement facility.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit f7212f1d11)
* agent/command.c (cmd_getinfo): New sub-commands.
* agent/protect.c (get_standard_s2k_count): Factor some code out to ...
(get_calibrated_s2k_count): new.
(get_standard_s2k_time): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): New field 's2k_count'.
* agent/gpg-agent.c (oS2KCount): New enum value.
(opts): New option --s2k-count.
(parse_rereadable_options): Set opt.s2k_count.
--
This option is useful to speed up the starting of gpg-agent and in
cases where the auto-calibration runs into problems due to a broken
time measurement facility.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (struct server_control_s): Rename PINENTRY_ACTIVE.
* agent/call-pinentry.c (entry_owner): Remove.
(agent_reset_query): Use thread private object of PINENTRY_ACTIVE.
(unlock_pinentry): Add CTRL to arguments to access thread private.
Check and decrement PINENTRY_ACTIVE for recursive use.
(start_pinentry): Check and increment PINENTRY_ACTIVE for recursion.
(agent_askpin): Follow the change of unlock_pinentry API.
(agent_get_passphrase, agent_get_confirmation): Likewise.
(agent_show_message, agent_popup_message_start): Likewise.
(agent_popup_message_stop, agent_clear_passphrase): Likewise.
--
We use the member PINENTRY_ACTIVE as a thread private object.
It's only valid for a single thread at a time.
It would be possible to have a thread shared object of
PINENTRY_ACTIVE, keeping ENTRY_OWNER for distinguishing its
owner (which is also a thread shared object). But, in this case,
access to ENTRY_OWNER is tricky (only comparison to accessing thread
would be OK with no lock), or we need to introduce another lock for
accessing ENTRY_OWNER, which complicates the code too much.
So, simply have a thread private object for recursive pinentry access.
GnuPG-bug-id: 3190
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit fb7828676c)
* agent/agent.h (struct server_control_s): Rename PINENTRY_ACTIVE.
* agent/call-pinentry.c (entry_owner): Remove.
(agent_reset_query): Use thread private object of PINENTRY_ACTIVE.
(unlock_pinentry): Add CTRL to arguments to access thread private.
Check and decrement PINENTRY_ACTIVE for recursive use.
(start_pinentry): Check and increment PINENTRY_ACTIVE for recursion.
(agent_askpin): Follow the change of unlock_pinentry API.
(agent_get_passphrase, agent_get_confirmation): Likewise.
(agent_show_message, agent_popup_message_start): Likewise.
(agent_popup_message_stop, agent_clear_passphrase): Likewise.
--
We use the member PINENTRY_ACTIVE as a thread private object.
It's only valid for a single thread at a time.
It would be possible to have a thread shared object of
PINENTRY_ACTIVE, keeping ENTRY_OWNER for distinguishing its
owner (which is also a thread shared object). But, in this case,
access to ENTRY_OWNER is tricky (only comparison to accessing thread
would be OK with no lock), or we need to introduce another lock for
accessing ENTRY_OWNER, which complicates the code too much.
So, simply have a thread private object for recursive pinentry access.
GnuPG-bug-id: 3190
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_scd): Support !BUILD_WITH_SCDAEMON.
* tests/openpgp/defs.scm (create-gpghome): Likewise.
* tests/gpgsm/gpgsm-defs.scm (create-gpgsmhome): Likewise.
--
We could modify gpg-agent to remove all support of scdaemon, with no
inclusion of call-scd.c, divert-scd.c, and learncard.c, but it would
not be worth to do that.
GnuPG-bug-id: 3316
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_scd): Support !BUILD_WITH_SCDAEMON.
* tests/openpgp/defs.scm (create-gpghome): Likewise.
* tests/gpgsm/gpgsm-defs.scm (create-gpgsmhome): Likewise.
--
We could modify gpg-agent to remove all support of scdaemon, with no
inclusion of call-scd.c, divert-scd.c, and learncard.c, but it would
not be worth to do that.
GnuPG-bug-id: 3316
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/agent.h (server_control_s): Add field 'client_uid'.
* agent/call-pinentry.c (start_pinentry): Add uid field to assuan
option "owner" sent to pinentry.
* agent/command-ssh.c (peer_info_s): New static struct.
(get_client_pid): Rename to...
(get_client_info): Here, and extract uid in addition to pid.
(start_command_handler_ssh): Use get_client_info() instead of
get_client_pid().
* agent/command.c (start_command_handler): Try assuan_get_peercred,
and only fall back to assuan_get_pid when assuan_get_peercred fails.
--
This also requires an update to pinentry to handle the new uid field.
Distributing the uid as well as the pid makes it harder for a
different user on the same machine to take advantage of any race
conditions between when a requesting process might ask for something
that needs pinentry, and when pinentry gets around to inspecting the
state of that process.
We put the uid before the nodename because the uid is guaranteed to be
a integer (represented in decimal), which makes it much simpler to
parse past than the potentially arbitrarily structured nodename.
Use a / instead of whitespace to delimit pid/uid at Werner's request.
If we were willing to depend on the nodename being
whitespace-delimited (as the current, unreleased pinentry code does),
then we could add the uid after the nodename. But since no released
pinentry depends on this option anyway, i think we should make the
more conservative, easily-parseable choice and put the user ID first.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/call-scd.c (cancel_inquire): Remove.
(agent_card_pksign, agent_card_pkdecrypt, agent_card_writekey)
(agent_card_scd): Don't call cancel_inquire.
--
Since libassuan 2.1.0, cancellation command "CAN" is handled within
the library, by assuan_transact. So, cancel_inquire just caused
spurious "CAN" command to scdaemon which resulted an error.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (hlp_genkey): update help text to suggest the use of
3072 bits.
* doc/wks.texi: Make example match default generation.
* g10/keygen.c (DEFAULT_STD_KEY_PARAM): update to
rsa3072/cert,sign+rsa3072/encr, and fix neighboring comment,
(gen_rsa, get_keysize_range): update default from 2048 to 3072).
* g10/keyid.c (pubkey_string): update comment so that first example
is the default 3072-bit RSA.
--
3072-bit RSA is widely considered to be 128-bit-equivalent security.
This is a sensible default in 2017.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gbp-Pq: Topic update-defaults
Gbp-Pq: Name 0015-gpg-default-to-3072-bit-RSA-keys.patch
* agent/agent.h (L_): Define agent_Lunderscore when simple
gettext is used.
--
This fixes a regression introduced by b3286af3 ENABLE_NLS
is not defined if we use simple gettext and not gettext.
GnuPG-Bug-Id: T3364
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* agent/gpg-agent.c (main): Move oSSHFingerprintDigest to ...
(parse_rereadable_options): here.
(opts): Change its description.
(main) <aGPGConfList>: Include this option.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add option at expert
level.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_pksign): Change var name 'rc' to 'err'.
* agent/findkey.c (read_key_file): Ditto. Change return type to
gpg_error_t. On es_fessk failure return a correct error code.
(agent_key_from_file): Change var name 'rc' to 'err'.
* agent/pksign.c (agent_pksign_do): Ditto. Change return type to
gpg_error_t. Return a valid erro code on malloc failure.
(agent_pksign): Ditto. Change return type to gpg_error_t. replace
xmalloc by xtrymalloc.
* agent/protect.c (calculate_mic): Change return type to gpg_error_t.
(do_decryption): Ditto. Do not init RC.
(merge_lists): Change return type to gpg_error_t.
(agent_unprotect): Ditto.
(agent_get_shadow_info): Ditto.
--
While code starring for bug 3266 I found two glitches and also changed
var name for easier reading.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (have_homedir_inotify): New var.
(reliable_homedir_inotify): New var.
(main): Set reliable_homedir_inotify.
(handle_tick): Call stat on the homedir.
(handle_connections): Mark availibility of the inotify watch.
* dirmngr/dirmngr.c (handle_tick): Call stat on the homedir.
(TIMERTICK_INTERVAL_SHUTDOWN): New.
(handle_connections): Depend tick interval on the shutdown state.
--
The stat call is used on systems which do not support inotify and also
when we assume that the inotify does not work reliable.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (main): Always to the chdir.
* dirmngr/dirmngr.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
--
Note that only dirmngr did not call the chdir with --no-detach. thus
we kept it this way.
Tested gpg-agent by checking the properties shown by procexp.
Gnupg-bug-id: 2670
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
* dirmngr/dirmngr.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
* scd/scdaemon.c [HAVE_W32_SYSTEM]: Include <direct.h>.
(main) [HAVE_W32_SYSTEM]: Change working directory to \.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2670
* agent/command.c (cmd_getinfo): Implement it for gcrypt >= 1.8.
--
For the de-vs compliance of gpg we need to check whether the Jitter
RNG is used on Windows. This change allows to test this for
gpg-agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (agent_get_passphrase): Reduce maximum
passphrase length as conveyed to the loopback to MAX_PASSPHRASE_LEN.
* agent/genkey.c (agent_ask_new_passphrase): Extend the maximum
passphrase as conveyed to the loopback to MAX_PASSPHRASE_LEN.
--
Note that in genkey() max_length is set to MAX_PASSPHRASE_LEN + 1
because in agent_askpin() decrements that value before conveying it to
the loopback.
GnuPG-bug-id: 3254
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (ssh_key_to_protected_buffer): If the empty
passphrase is supplied, do not protect the key.
GnuPG-bug-id: 2856
Signed-off-by: Justus Winter <justus@g10code.com>
* common/sysutils.c (gnupg_inotify_watch_delete_self): New.
* agent/gpg-agent.c (handle_connections): Rename my_inotify_fd to
sock_inotify_fd.
(handle_connections): Add home_inotify_fd to watch the home directory.
--
GnuPG-bug-id: 3218
Note that we should add this also to dirmngr. And for non-Linux
systems a stat in ticker should be implemented.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): New field 'ssh_fingerprint_digest'.
* agent/command-ssh.c (data_sign, ssh_identity_register): Honor the
option for strings used to communicate with the user.
* agent/findkey.c (agent_modify_description): Likewise.
* agent/gpg-agent.c (cmd_and_opt_values): New value.
(opts): New option '--ssh-fingerprint-digest'.
(parse_rereadable_options): Set the default to MD5 for now.
(main): Handle the new option.
* doc/gpg-agent.texi: Document the new option.
--
OpenSSH has transitioned from using MD5 to compute key fingerprints to
SHA256. This patch makes the digest used when communicating key
fingerprints to the user (e.g. in pinentry dialogs) configurable.
For now this patch conservatively defaults to MD5.
GnuPG-bug-id: 2106
Signed-off-by: Justus Winter <justus@g10code.com>
* agent/command-ssh.c (add_control_entry): Hand in the key, write both
the MD5- and the SHA256-based fingerprint to the 'sshcontrol' file
when adding ssh keys.
(ssh_identity_register): Adapt callsite.
GnuPG-bug-id: 2106
Signed-off-by: Justus Winter <justus@g10code.com>
