* scd/apdu.c (ccid_keypad_operation): Rename from ccid_keypad_verify.
(open_ccid_reader): Use ccid_keypad_operation for verify and modify.
* scd/ccid-driver.c (VENDOR_VASCO, VASCO_920): New.
(ccid_transceive_apdu_level): Permit sending packet where
apdulen <= 289. Support receiving packets in a chain.
(ccid_transceive_secure): Maximum is 15 for VASCO DIGIPASS 920.
Support keypad_modify method such as CHANGE_REFERENCE_DATA: 0x24.
* common/dotlock.c (use_hardlinks_p, dotlock_take_unix): Check return
value of link().
* g13/g13.c: Make sure err is initialized.
* scd/scdaemon.c (main) [!USE_GCRY_THREAD_CBS]: Do not define ERR.
* agent/gpg-agent.c, dirmngr/dirmngr.c, g13/g13.c, scd/scdaemon.c
(USE_GCRY_THREAD_CBS): New macro, defined if
GCRY_THREAD_OPTION_VERSION is 0.
(fixed_gcry_pth_init) [!USE_GCRY_THREAD_CBS]: Don't define.
(main) [!USE_GCRY_THREAD_CBS]: Do not install thread callbacks.
* scd/apdu.c (apdu_connect): Do not test for zero atrlen.
--
When gpg-agent prompts for insertion of a card this error would be
returned.
Co-authored-by: Ben Kibbey <bjk@luxsci.net>
* scd/app.c (select_application): Reorder application tests.
--
Although the DINSIG application is available on most German cards, it
is in reality not used. Thus showing the Geldkarte application is
more desirable for a good user experience.
* scd/command.c (update_card_removed): Do no act on an invalid VRDR.
(do_reset): Ignore apdu_reset error codes for no and inactive card.
Close the reader before setting the slot to -1.
(update_reader_status_file): Notify the application before closing the
reader.
--
With this change the scd now works as it did in the past. In
particular there is no more endless loop trying to open the reader by
the update_reader_status_file ticker function. That bug basically
blocked all card operations until the scdaemon was killed.
* scd/scdaemon.c (oDebugAssuanLogCats): New.
(opts): Add option --debug-assuan-log-cats.
(main): Implement option.
* common/asshelp.c (set_libassuan_log_cats): New.
--
The old way of setting the logging categories with an environment
variable is awkward if sdaemon is spawned from a running gpg-agent.
The vreader table makes the code more clear by explicitly talking
about APDU slots and reader indices. It also accommodates for future
extensions.
* scd/scdaemon.h (server_control_s): Remove READER_SLOT.
* scd/scdaemon.c (scd_init_default_ctrl): Do not init READER_SLOT.
* scd/app.c (check_application_conflict): Add arg SLOT.
* scd/command.c (slot_status_s): Rename to vreader_s.
(server_local_s): Add field VREADER_IDX as replacement for
the READER_SLOT in server_control_s. Change all users.
(slot_table): Rename to vreader_table. Change all users.
(vreader_slot): New.
(do_reset, cmd_apdu): Map vreader to apdu slot.
(get_reader_slot): Rename to get_current_reader. Return -1 on error.
(open_card): Map vreader toapdu slot. Pass slot to
check_application_conflict.
(scd_command_handler): Init VREADER_IDX.
(update_reader_status_file): Reset SLOT field on error.
* scd/apdu.c (apdu_connect): Return status codes for no card available
and inactive card.
* scd/command.c (TEST_CARD_REMOVAL): Also test for GPG_ERR_CARD_RESET.
(open_card): Map apdu_connect status to GPG_ERR_CARD_RESET.
* apdu.c (pcsc_keypad_verify): Have dummy Lc field with value 0.
(pcsc_keypad_modify): Likewise.
(pcsc_keypad_modify): It's only for ISO7816_CHANGE_REFERENCE_DATA.
bConfirmPIN value is determined by the parameter p0.
* app-openpgp.c (do_change_pin): The flag use_keypad should be 0 when
reset_mode is on, or resetcode is on. use_keypad only makes sense for
iso7816_change_reference_data_kp.
* iso7816.h (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
* iso7816.c (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
* scripts/gitlog-to-changelog: New script. Taken from gnulib.
* scripts/git-log-fix: New file.
* scripts/git-log-footer: New file.
* doc/HACKING: Describe the ChangeLog policy
* ChangeLog: New file.
* Makefile.am (EXTRA_DIST): Add new files.
(gen-ChangeLog): New.
(dist-hook): Run gen-ChangeLog.
Rename all ChangeLog files to ChangeLog-2011.
Before this change, it is layered like following:
iso7816_verify
iso7816_verify_kp
apdu_send_simple, apdu_send_simple_kp
...
After this change, it will be layered like:
iso7816_verify iso7816_verify_kp
apdu_send_simple apdu_keypad_verify
...
and apdu_send_simple_kp will be deprecated.
For PC/SC API, we use:
SCardControl API to compose CCID PC_to_RDR_Secure message
SCardTransmit API to compose CCID PC_to_RDR_XfrBlock message
Considering the support of PC/SC, we have nothing to share between _kp
version of iso7816_* and no _kp version.
This patch implementes a chunk mode to pass the key parameters from
scdaemon to gpg. This allows to pass arbitrary long key paremeters;
it is used for keys larger than 3072 bit.
Note: the card key generation in gpg is currently broken. The keys
are generated but it is not possible to create the self-signature
because at that time the gpg-agent does not yet know about the new
keys and thus can't divert the sign request to the card. We either
need to run the learn command right after calling agent_scd_genkey or
implement a way to sign using the currently inserted card. Another
option would be to get rid of agent_scd_genkey and implement the
feature directly in agent_genkey.
This is not a part of pin pad support series of mine.
As I found the bug while I am preparing the patches, I report this.
As CCID protocol is little endian, wLangId of US English = 0x0409
is represented as two bytes of 0x09 then 0x04.
It is really confusing that the code like following is floating
around:
pin_verify -> wLangId = HOST_TO_CCID_16(0x0904);
But, it is 0x0409 (not 0x0904). It is defined in the documentation:
http://www.usb.org/developers/docs/USB_LANGIDs.pdf
and origin of this table is Microsoft. We can see it at:
http://msdn.microsoft.com/en-us/library/bb165625%28VS.80%29.aspx
Yes, it would be better not to hard-code 0x0409. It would be better
to try current locale of the user, or to use the first entry of string
descriptor. I don't have time to implement such a thing...
This solves a problem where ccid was used, the card unplugged and then
scdaemon tries to find a new (plugged in) reader and thus will
eventually try PC/SC over and over again.
Also added an explicit --kill command to gpgconf.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
From Grant Olsons's mail to gnupg-devel@:
This is three-quarters NIIBE and one-quarter me, but I though it would
be easier to have a single complete patch that applies to
STABLE-BRANCH-2-0 than two patches floating around.
This is basically NIIBE Yatuka's patch here:
http://lists.gnupg.org/pipermail/gnupg-devel/2010-November/025828.html
Plus another check that closes down the reader explicitly if we get a
SW_HOST_NO_READER error, so that an unplugged reader doesn't hold onto
the first slot, preventing us from getting to the active plugged reader.
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* command.c (start_command_handler): Use assuan_fd_t and
assuan_fdopen on fds.
scd/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* command.c (scd_command_handler): Use assuan_fd_t and
assuan_fdopen on fds.
sm/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* server.c (gpgsm_server): Use assuan_fd_t and assuan_fdopen on
fds.
g10/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* server.c (gpg_server): Use assuan_fd_t and assuan_fdopen on fds.
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-pinentry.c (start_pinentry): Call assuan_pipe_connect, not
assuan_pipe_connect_ext.
* command.c (start_command_handler): Change
assuan_init_socket_server_ext into assuan_init_socket_server.
* call-scd.c (start_scd): Update use of assuan_socket_connect and
assuan_pipe_connect.
* gpg-agent.c (check_own_socket_thread, check_for_running_agent):
Update use of assuan_socket_connect.
common/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
scd/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* command.c (scd_command_handler): Call assuan_init_socket_server,
not assuan_init_socket_server_ext.
sm/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-dirmngr.c (start_dirmngr_ext): Update use of
assuan_pipe_connect and assuan_socket_connect.
tools/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (start_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
