security-and-privacy/gnupg
security-and-privacy/gnupg
1
0
Fork 0
mirror of git://git.gnupg.org/gnupg.git synced 2024-11-04 20:38:50 +01:00
Code Activity
f3c5cc8bcd
gnupg/NEWS
Werner Koch 4f90c7b914 w32: Add code to support a portable use of GnuPG. 
* common/homedir.c (w32_bin_is_bin, w32_portable_app) [W32]: New.
(check_portable_app) [W32]: New.
(standard_homedir, default_homedir) [W32]: Support the portable flag.
(w32_rootdir, w32_commondir) [W32]: Ditto.
(gnupg_bindir) [W32]: Ditto.
--

A portable use of GnuPG under Windows means that GnuPG uses a home
directory depending on the location of the actual binary.  No registry
variables are considered.  The portable mode is enabled if in the
installation directory of the the binary "gpgconf.exe" and a file
"gpgconf.ctl" are found.  The latter file shall be empty or consist
only of empty or '#'-style comment lines.

Signed-off-by: Werner Koch <wk@gnupg.org>
2013-08-01 19:50:52 +02:00

879 lines
27 KiB
Plaintext
Raw Blame History

Noteworthy changes in version 2.0.21 (unreleased)
-------------------------------------------------
* gpg-agent: By default the users are now asked via the Pinentry
whether they trust an X.509 root key. To prohibit interactive
marking of such keys, the new option --no-allow-mark-trusted may
be used.
* The included ssh agent does now support ECDSA keys.
* The new option --enable-putty-support allows gpg-agent on Windows
to act as a Pageant replacement with full smartcard support.
* Support installation as portable application under Windows.
Noteworthy changes in version 2.0.20 (2013-05-10)
-------------------------------------------------
* Decryption using smartcards keys > 3072 bit does now work.
* New meta option ignore-invalid-option to allow using the same
option file by other GnuPG versions.
* gpg: The hash algorithm is now printed for sig records in key listings.
* gpg: Skip invalid keyblock packets during import to avoid a DoS.
* gpg: Correctly handle ports from DNS SRV records.
* keyserver: Improve use of SRV records
* gpg-agent: Avoid tty corruption when killing pinentry.
* scdaemon: Improve detection of card insertion and removal.
* scdaemon: Rename option --disable-keypad to --disable-pinpad.
* scdaemon: Better support for CCID readers. Now, the internal CCID
driver supports readers without the auto configuration feature.
* scdaemon: Add pinpad input for PC/SC, if your reader has pinpad and
it supports variable length PIN input, and you specify
--enable-pinpad-varlen option.
* scdaemon: New option --enable-pinpad-varlen.
* scdaemon: Install into libexecdir to avoid accidental execution
from the command line.
* Support building using w64-mingw32.
* Assorted bug fixes.
Noteworthy changes in version 2.0.19 (2012-03-27)
-------------------------------------------------
* GPG now accepts a space separated fingerprint as a user ID. This
allows to copy and paste the fingerprint from the key listing.
* GPG now uses the longest key ID available. Removed support for the
original HKP keyserver which is not anymore used by any site.
* Rebuild the trustdb after changing the option --min-cert-level.
* Ukrainian translation.
* Honor option --cert-digest-algo when creating a cert.
* Emit a DECRYPTION_INFO status line.
* Improved detection of JPEG files.
Noteworthy changes in version 2.0.18 (2011-08-04)
-------------------------------------------------
* Bug fix for newer versions of Libgcrypt.
* Support the SSH confirm flag and show SSH fingerprints in ssh
related pinentries.
* Improved dirmngr/gpgsm interaction for OCSP.
* Allow generation of card keys up to 4096 bit.
Noteworthy changes in version 2.0.17 (2011-01-13)
-------------------------------------------------
* Allow more hash algorithms with the OpenPGP v2 card.
* The gpg-agent now tests for a new gpg-agent.conf on a HUP.
* Fixed output of "gpgconf --check-options".
* Fixed a bug where Scdaemon sends a signal to Gpg-agent running in
non-daemon mode.
* Fixed TTY management for pinentries and session variable update
problem.
Noteworthy changes in version 2.0.16 (2010-07-19)
-------------------------------------------------
* If the agent's --use-standard-socket option is active, all tools
try to start and daemonize the agent on the fly. In the past this
was only supported on W32; on non-W32 systems the new configure
option --enable-standard-socket may now be used to use this feature
by default.
* The gpg-agent commands KILLAGENT and RELOADAGENT are now available
on all platforms.
* Minor bug fixes.
Noteworthy changes in version 2.0.15 (2010-03-09)
-------------------------------------------------
* New command --passwd for GPG.
* Fixes a regression in 2.0.14 which prevented unprotection of new
or changed gpg-agent passphrases.
* Make use of libassuan 2.0 which is available as a DSO.
Noteworthy changes in version 2.0.14 (2009-12-21)
-------------------------------------------------
* The default for --include-cert is now to include all certificates
in the chain except for the root certificate.
* Numerical values may now be used as an alternative to the
debug-level keywords.
* The GPGSM --audit-log feature is now more complete.
* GPG now supports DNS lookups for SRV, PKA and CERT on W32.
* New GPGSM option --ignore-cert-extension.
* New and changed passphrases are now created with an iteration count
requiring about 100ms of CPU work.
Noteworthy changes in version 2.0.13 (2009-09-04)
-------------------------------------------------
* GPG now generates 2048 bit RSA keys by default. The default hash
algorithm preferences has changed to prefer SHA-256 over SHA-1.
2048 bit DSA keys are now generated to use a 256 bit hash algorithm
* The envvars XMODIFIERS, GTK_IM_MODULE and QT_IM_MODULE are now
passed to the Pinentry to make SCIM work.
* The GPGSM command --gen-key features a --batch mode and implements
all features of gpgsm-gencert.sh in standard mode.
* New option --re-import for GPGSM's IMPORT server command.
* Enhanced writing of existing keys to OpenPGP v2 cards.
* Add hack to the internal CCID driver to allow the use of some
Omnikey based card readers with 2048 bit keys.
* GPG now repeatly asks the user to insert the requested OpenPGP
card. This can be disabled with --limit-card-insert-tries=1.
* Minor bug fixes.
Noteworthy changes in version 2.0.12 (2009-06-17)
-------------------------------------------------
* GPGSM now always lists ephemeral certificates if specified by
fingerprint or keygrip.
* New command "KEYINFO" for GPG_AGENT. GPGSM now also returns
information about smartcards.
* Made sure not to leak file descriptors if running gpg-agent with a
command. Restore the signal mask to solve a problem in Mono.
* Changed order of the confirmation questions for root certificates
and store negative answers in trustlist.txt.
* Better synchronization of concurrent smartcard sessions.
* Support 2048 bit OpenPGP cards.
* Support Telesec Netkey 3 cards.
* The gpg-protect-tool now uses gpg-agent via libassuan. Under
Windows the Pinentry will now be put into the foreground.
* Changed code to avoid a possible Mac OS X system freeze.
Noteworthy changes in version 2.0.11 (2009-03-03)
-------------------------------------------------
* Fixed a problem in SCDAEMON which caused unexpected card resets.
* SCDAEMON is now aware of the Geldkarte.
* The SCDAEMON option --allow-admin is now used by default.
* GPGCONF now restarts SCdaemon if necessary.
* The default cipher algorithm in GPGSM is now again 3DES. This is
due to interoperability problems with Outlook 2003 which still
can't cope with AES.
Noteworthy changes in version 2.0.10 (2009-01-12)
-------------------------------------------------
* [gpg] New keyserver helper gpg2keys_kdns as generic DNS CERT
lookup. Run with --help for a short description. Requires the
ADNS library.
* [gpg] New mechanisms "local" and "nodefault" for --auto-key-locate.
Fixed a few problems with this option.
* [gpg] New command --locate-keys.
* [gpg] New options --with-sig-list and --with-sig-check.
* [gpg] The option "-sat" is no longer an alias for --clearsign.
* [gpg] The option --fixed-list-mode is now implicitly used and obsolete.
* [gpg] New control statement %ask-passphrase for the unattended key
generation.
* [gpg] The algorithm to compute the SIG_ID status has been changed.
* [gpgsm] Now uses AES by default.
* [gpgsm] Made --output option work with --export-secret-key-p12.
* [gpg-agent] Terminate process if the own listening socket is not
anymore served by ourself.
* [scdaemon] Made it more robust on W32.
* [gpg-connect-agent] Accept commands given as command line arguments.
* [w32] Initialized the socket subsystem for all keyserver helpers.
* [w32] The sysconf directory has been moved from a subdirectory of
the installation directory to %CSIDL_COMMON_APPDATA%/GNU/etc/gnupg.
* [w32] The gnupg2.nls directory is not anymore used. The standard
locale directory is now used.
* [w32] Fixed a race condition between gpg and gpgsm in the use of
temporary file names.
* The gpg-preset-passphrase mechanism works again. An arbitrary
string may now be used for a custom cache ID.
* Admin PINs are cached again (bug in 2.0.9).
* Support for version 2 OpenPGP cards.
* Libgcrypt 1.4 is now required.
Noteworthy changes in version 2.0.9 (2008-03-26)
------------------------------------------------
* Gpgsm always tries to locate missing certificates from a running
Dirmngr's cache.
* Tweaks for Windows.
* The Admin PIN for OpenPGP cards may now be entered with the pinpad.
* Improved certificate chain construction.
* Extended the PKITS framework.
* Fixed a bug in the ambigious name detection.
* Fixed possible memory corruption while importing OpenPGP keys (bug
introduced with 2.0.8). [CVE-2008-1530]
* Minor bug fixes.
Noteworthy changes in version 2.0.8 (2007-12-20)
------------------------------------------------
* Enhanced gpg-connect-agent with a small scripting language.
* New option --list-config for gpgconf.
* Fixed a crash in gpgconf.
* Gpg-agent now supports the passphrase quality bar of the latest
Pinentry.
* The envvars XAUTHORITY and PINENTRY_USER_DATA are now passed to the
Pinentry.
* Fixed the auto creation of the key stub for smartcards.
* Fixed a rare bug in decryption using the OpenPGP card.
* Creating DSA2 keys is now possible.
* New option --extra-digest-algo for gpgsm to allow verification of
broken signatures.
* Allow encryption with legacy Elgamal sign+encrypt keys with option
--rfc2440.
* Windows is now a supported platform.
* Made sure that under Windows the file permissions of the socket are
taken into account. This required a change of our socket emulation
code and changed the IPC protocol under Windows.
Noteworthy changes in version 2.0.7 (2007-09-10)
------------------------------------------------
* Fixed encryption problem if duplicate certificates are in the
keybox.
* Made it work on Windows Vista. Note that the entire Windows port
is still considered Beta.
* Add new options min-passphrase-nonalpha, check-passphrase-pattern,
enforce-passphrase-constraints and max-passphrase-days to
gpg-agent.
* Add command --check-components to gpgconf. Gpgconf now uses the
installed versions of the programs and does not anymore search via
PATH for them.
Noteworthy changes in version 2.0.6 (2007-08-16)
------------------------------------------------
* GPGSM does now grok --default-key.
* GPGCONF is now aware of --default-key and --encrypt-to.
* GPGSM does again correctly print the serial number as well the the
various keyids. This was broken since 2.0.4.
* New option --validation-model and support for the chain-model.
* Improved Windows support.
Noteworthy changes in version 2.0.5 (2007-07-05)
------------------------------------------------
* Switched license to GPLv3.
* Basic support for Windows. Run "./autogen.sh --build-w32" to build
it. As usual the mingw cross compiling toolchain is required.
* Fixed bug when using the --p12-charset without --armor.
* The command --gen-key may now be used instead of the
gpgsm-gencert.sh script.
* Changed key generation to reveal less information about the
machine. Bug fixes for gpg2's card key generation.
Noteworthy changes in version 2.0.4 (2007-05-09)
------------------------------------------------
* The server mode key listing commands are now also working for
systems without the funopen/fopencookie API.
* PKCS#12 import now tries several encodings in case the passphrase
was not utf-8 encoded. New option --p12-charset for gpgsm.
* Improved the libgcrypt logging support in all modules.
Noteworthy changes in version 2.0.3 (2007-03-08)
------------------------------------------------
* By default, do not allow processing multiple plaintexts in a single
stream. Many programs that called GnuPG were assuming that GnuPG
did not permit this, and were thus not using the plaintext boundary
status tags that GnuPG provides. This change makes GnuPG reject
such messages by default which makes those programs safe again.
--allow-multiple-messages returns to the old behavior. [CVE-2007-1263].
* New --verify-option show-primary-uid-only.
* gpgconf may now reads a global configuration file to select which
options are changeable by a frontend. The new applygnupgdefaults
tool may be used by an admin to set default options for all users.
* The PIN pad of the Cherry XX44 keyboard is now supported. The
DINSIG and the NKS applications are now also aware of PIN pads.
Noteworthy changes in version 2.0.2 (2007-01-31)
------------------------------------------------
* Fixed a serious and exploitable bug in processing encrypted
packages. [CVE-2006-6235].
* Added --passphrase-repeat to set the number of times GPG will
prompt for a new passphrase to be repeated. This is useful to help
memorize a new passphrase. The default is 1 repetition.
* Using a PIN pad does now also work for the signing key.
* A warning is displayed by gpg-agent if a new passphrase is too
short. New option --min-passphrase-len defaults to 8.
* The status code BEGIN_SIGNING now shows the used hash algorithms.
Noteworthy changes in version 2.0.1 (2006-11-28)
------------------------------------------------
* Experimental support for the PIN pads of the SPR 532 and the Kaan
Advanced card readers. Add "disable-keypad" scdaemon.conf if you
don't want it. Does currently only work for the OpenPGP card and
its authentication and decrypt keys.
* Fixed build problems on some some platforms and crashes on amd64.
* Fixed a buffer overflow in gpg2. [bug#728,CVE-2006-6169]
Noteworthy changes in version 2.0.0 (2006-11-11)
------------------------------------------------
* First stable version of a GnuPG integrating OpenPGP and S/MIME.
Noteworthy changes in version 1.9.95 (2006-11-06)
-------------------------------------------------
* Minor bug fixes.
Noteworthy changes in version 1.9.94 (2006-10-24)
-------------------------------------------------
* Keys for gpgsm may now be specified using a keygrip. A keygrip is
indicated by a prefixing it with an ampersand.
* gpgconf now supports switching the CMS cipher algo (e.g. to AES).
* New command --gpgconf-test for all major tools. This may be used to
check whether the configuration file is sane.
Noteworthy changes in version 1.9.93 (2006-10-18)
-------------------------------------------------
* In --with-validation mode gpgsm will now also ask whether a root
certificate should be trusted.
* Link to Pth only if really necessary.
* Fixed a pubring corruption bug in gpg2 occurring when importing
signatures or keys with insane lengths.
* Fixed v3 keyID calculation bug in gpg2.
* More tweaks for certificates without extensions.
Noteworthy changes in version 1.9.92 (2006-10-11)
-------------------------------------------------
* Bug fixes.
Noteworthy changes in version 1.9.91 (2006-10-04)
-------------------------------------------------
* New "relax" flag for trustlist.txt to allow root CA certificates
without BasicContraints.
* [gpg2] Removed the -k PGP 2 compatibility hack. -k is now an
alias for --list-keys.
* [gpg2] Print a warning if "-sat" is used instead of "--clearsign".
Noteworthy changes in version 1.9.90 (2006-09-25)
-------------------------------------------------
* Made readline work for gpg.
* Cleanups und minor bug fixes.
* Included translations from gnupg 1.4.5.
Noteworthy changes in version 1.9.23 (2006-09-18)
-------------------------------------------------
* Regular man pages for most tools are now build directly from the
Texinfo source.
* The gpg code from 1.4.5 has been fully merged into this release.
The configure option --enable-gpg is still required to build this
gpg part. For production use of OpenPGP the gpg version 1.4.5 is
still recommended. Note, that gpg will be installed under the name
gpg2 to allow coexisting with an 1.4.x gpg.
* API change in gpg-agent's pkdecrypt command. Thus an older gpgsm
may not be used with the current gpg-agent.
* The scdaemon will now call a script on reader status changes.
* gpgsm now allows file descriptor passing for "INPUT", "OUTPUT" and
"MESSAGE".
* The gpgsm server may now output a key listing to the output file
handle. This needs to be enabled using "OPTION list-to-output=1".
* The --output option of gpgsm has now an effect on list-keys.
* New gpgsm commands --dump-chain and list-chain.
* gpg-connect-agent has new options to utilize descriptor passing.
* A global trustlist may now be used. See doc/examples/trustlist.txt.
* When creating a new pubring.kbx keybox common certificates are
imported.
Noteworthy changes in version 1.9.22 (2006-07-27)
-------------------------------------------------
* Enhanced pkcs#12 support to allow import from simple keyBags.
* Exporting to pkcs#12 now create bag attributes so that Mozilla is
able to import the files.
* Fixed uploading of certain keys to the smart card.
Noteworthy changes in version 1.9.21 (2006-06-20)
-------------------------------------------------
* New command APDU for scdaemon to allow using it for general card
access. Might be used through gpg-connect-agent by using the SCD
prefix command.
* Support for the CardMan 4040 PCMCIA reader (Linux 2.6.15 required).
* Scdaemon does not anymore reset cards at the end of a connection.
* Kludge to allow use of Bundesnetzagentur issued X.509 certificates.
* Added --hash=xxx option to scdaemon's PKSIGN command.
* Pkcs#12 files are now created with a MAC. This is for better
interoperability.
* Collected bug fixes and minor other changes.
Noteworthy changes in version 1.9.20 (2005-12-20)
-------------------------------------------------
* Importing pkcs#12 files created be recent versions of Mozilla works
again.
* Basic support for qualified signatures.
* New debug tool gpgparsemail.
Noteworthy changes in version 1.9.19 (2005-09-12)
-------------------------------------------------
* The Belgian eID card is now supported for signatures and ssh.
Other pkcs#15 cards should work as well.
* Fixed bug in --export-secret-key-p12 so that certificates are again
included.
Noteworthy changes in version 1.9.18 (2005-08-01)
-------------------------------------------------
* [gpgsm] Now allows for more than one email address as well as URIs
and dnsNames in certificate request generation. A keygrip may be
given to create a request from an existing key.
* A couple of minor bug fixes.
Noteworthy changes in version 1.9.17 (2005-06-20)
-------------------------------------------------
* gpg-connect-agent has now features to handle Assuan INQUIRE
commands.
* Internal changes for OpenPGP cards. New Assuan command WRITEKEY.
* GNU Pth is now a hard requirement.
* [scdaemon] Support for OpenSC has been removed. Instead a new and
straightforward pkcs#15 modules has been written. As of now it
does allows only signing using TCOS cards but we are going to
enhance it to match all the old capabilities.
* [gpg-agent] New option --write-env-file and Assuan command
UPDATESTARTUPTTY.
* [gpg-agent] New option --default-cache-ttl-ssh to set the TTL for
SSH passphrase caching independent from the other passphrases.
Noteworthy changes in version 1.9.16 (2005-04-21)
-------------------------------------------------
* gpg-agent does now support the ssh-agent protocol and thus allows
to use the pinentry as well as the OpenPGP smartcard with ssh.
* New tool gpg-connect-agent as a general client for the gpg-agent.
* New tool symcryptrun as a wrapper for certain encryption tools.
* The gpg tool is not anymore build by default because those gpg
versions available in the gnupg 1.4 series are far more matured.
Noteworthy changes in version 1.9.15 (2005-01-13)
-------------------------------------------------
* Fixed passphrase caching bug.
* Better support for CCID readers; the reader from Cherry RS 6700 USB
does now work.
Noteworthy changes in version 1.9.14 (2004-12-22)
-------------------------------------------------
* [gpg-agent] New option --use-standard-socket to allow the use of a
fixed socket. gpgsm falls back to this socket if GPG_AGENT_INFO
has not been set.
* Ported to MS Windows with some functional limitations.
* New tool gpg-preset-passphrase.
Noteworthy changes in version 1.9.13 (2004-12-03)
-------------------------------------------------
* [gpgsm] New option --prefer-system-dirmngr.
* Minor cleanups and debugging aids.
Noteworthy changes in version 1.9.12 (2004-10-22)
-------------------------------------------------
* [scdaemon] Partly rewrote the PC/SC code.
* Removed the sc-investigate tool. It is now in a separate package
available at ftp://ftp.g10code.com/g10code/gscutils/ .
* [gpg-agent] Fixed logging problem.
Noteworthy changes in version 1.9.11 (2004-10-01)
-------------------------------------------------
* When using --import along with --with-validation, the imported
certificates are validated and only imported if they are fully
valid.
* [gpg-agent] New option --max-cache-ttl.
* [gpg-agent] When used without --daemon or --server, gpg-agent now
check whether a agent is already running and usable.
* Fixed some i18n problems.
Noteworthy changes in version 1.9.10 (2004-07-22)
-------------------------------------------------
* Fixed a serious bug in the checking of trusted root certificates.
* New configure option --enable-agent-pnly allows to build and
install just the agent.
* Fixed a problem with the log file handling.
Noteworthy changes in version 1.9.9 (2004-06-08)
------------------------------------------------
* [gpg-agent] The new option --allow-mark-trusted is now required to
allow gpg-agent to add a key to the trustlist.txt after user
confirmation.
* Creating PKCS#10 requests does now honor the key usage.
Noteworthy changes in version 1.9.8 (2004-04-29)
------------------------------------------------
* [scdaemon] Overhauled the internal CCID driver.
* [scdaemon] Status files named ~/.gnupg/reader_<n>.status are now
written when using the internal CCID driver.
* [gpgsm] New commands --dump-{,secret,external}-keys to show a very
detailed view of the certificates.
* The keybox gets now compressed after 3 hours and ephemeral
stored certificates are deleted after about a day.
* [gpg] Usability fixes for --card-edit. Note, that this has already
been ported back to gnupg-1.3
Noteworthy changes in version 1.9.7 (2004-04-06)
------------------------------------------------
* Instrumented the modules for gpgconf.
* Added support for DINSIG card applications.
* Include the smimeCapabilities attribute with signed messages.
* Now uses the gettext domain "gnupg2" to avoid conflicts with gnupg
versions < 1.9.
Noteworthy changes in version 1.9.6 (2004-03-06)
------------------------------------------------
* Code cleanups and bug fixes.
Noteworthy changes in version 1.9.5 (2004-02-21)
------------------------------------------------
* gpg-protect-tool gets now installed into libexec as it ought to be.
Cleaned up the build system to better comply with the coding
standards.
* [gpgsm] The --import command is now able to autodetect pkcs#12
files and import secret and private keys from this file format.
A new command --export-secret-key-p12 is provided to allow
exporting of secret keys in PKCS\#12 format.
* [gpgsm] The pinentry will now present a description of the key for
whom the passphrase is requested.
* [gpgsm] New option --with-validation to check the validity of key
while listing it.
* New option --debug-level={none,basic,advanced,expert,guru} to map
the debug flags to sensitive levels on a per program base.
Noteworthy changes in version 1.9.4 (2004-01-30)
------------------------------------------------
* Added support for the Telesec NKS 2.0 card application.
* Added simple tool addgnupghome to create .gnupg directories from
/etc/skel/.gnupg.
* Various minor bug fixes and cleanups; mainly gpgsm and gpg-agent
related.
Noteworthy changes in version 1.9.3 (2003-12-23)
------------------------------------------------
* New gpgsm options --{enable,disable}-ocsp to validate keys using
OCSP. This option requires a not yet released DirMngr version.
Default is disabled.
* The --log-file option may now be used to print logs to a socket.
Prefix the socket name with "socket://" to enable this. This does
not work on all systems and falls back to stderr if there is a
problem with the socket.
* The options --encrypt-to and --no-encrypt-to now work the same in
gpgsm as in gpg. Note, they are also used in server mode.
* Duplicated recipients are now silently removed in gpgsm.
Noteworthy changes in version 1.9.2 (2003-11-17)
------------------------------------------------
* On card key generation is no longer done using the --gen-key
command but from the menu provided by the new --card-edit command.
* PINs are now properly cached and there are only 2 PINs visible.
The 3rd PIN (CHV2) is internally syncronized with the regular PIN.
* All kind of other internal stuff.
Noteworthy changes in version 1.9.1 (2003-09-06)
------------------------------------------------
* Support for OpenSC is back. scdaemon supports a --disable-opensc to
disable OpenSC use at runtime, so that PC/SC or ct-API can still be
used directly.
* Rudimentary support for the SCR335 smartcard reader using an
internal driver. Requires current libusb from CVS.
* Bug fixes.
Noteworthy changes in version 1.9.0 (2003-08-05)
------------------------------------------------
====== PLEASE SEE README-alpha =======
* gpg has been renamed to gpg2 and gpgv to gpgv2. This is a
temporary change to allow co-existing with stable gpg versions.
* ~/.gnupg/gpg.conf-1.9.0 is fist tried as config file before the
usual gpg.conf.
* Removed the -k, -kv and -kvv commands. -k is now an alias to
--list-keys. New command -K as alias for --list-secret-keys.
* Removed --run-as-shm-coprocess feature.
* gpg does now also use libgcrypt, libgpg-error is required.
* New gpgsm commands --call-dirmngr and --call-protect-tool.
* Changing a passphrase is now possible using "gpgsm --passwd"
* The content-type attribute is now recognized and created.
* The agent does now reread certain options on receiving a HUP.
* The pinentry is now forked for each request so that clients with
different environments are supported. When running in daemon mode
and --keep-display is not used the DISPLAY variable is ignored.
* Merged stuff from the newpg branch and started this new
development branch.
Copyright 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
2010, 2011 Free Software Foundation, Inc.
This file is free software; as a special exception the author gives
unlimited permission to copy and/or distribute it, with or without
modifications, as long as this notice is preserved.
This file is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
View Git Blame Copy Permalink