Replace mentions of bugs.gnupg.org with https://dev.gnupg.org/. Since
the project has transitioned to a better workflow for supporting
contributions, we should ensure that our documentation points to the
right place.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* build-aux/speed/w32/inst.nsi: stop installing skeleton files.
* doc/gpg.texi: stop documenting skeleton files.
* g10/Makefile.am: stop installing skeleton files.
* g10/openfile.c (copy_options_file): Remove.
(try_make_homedir): do not call copy_options_file.
--
The defaults for gpg and dirmngr are good. Both programs should work
fine for the simple case without any config file. The skeleton config
files were being copied at first use (when the defaults are fine).
But when the user needs to fiddle with them (after they've become
sophisticated users), they're likely out of date because gpg has been
upgraded since then. So they're used for documentation, but they're
stale documentation, which is probably worse than a clean empty file.
GnuPG-bug-id: 3086
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* dirmngr/dirmngr.h (struct opt): Add field 'disable_ipv6'.
* dirmngr/dirmngr.c (oDisableIPv6): New const.
(opts): New option --disable-ipv6.
(parse_rereadable_options): Set that option.
* dirmngr/dns-stuff.c (opt_disable_ipv6): New var.
(set_dns_disable_ipv6): New.
(resolve_name_standard): Make use of it.
* dirmngr/ks-engine-finger.c (ks_finger_fetch): Take care of
OPT.DISABLE_IPV6.
* dirmngr/ks-engine-hkp.c (map_host): Ditto.
(send_request): Ditto.
* dirmngr/ks-engine-http.c (ks_http_fetch): Ditto.
* dirmngr/ocsp.c (do_ocsp_request): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/protect.c (PROT_DEFAULT_TO_OCB): Remove macro.
(agent_protect): Make the default protection mode depend on the extend
key format option.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_trust): Rename to ...
(parse_ring_trust): this. Change args and implement new ring trust
packet format.
(parse): Add special ring trust packet handling.
* g10/packet.h (PKT_user_id): New fields KEYUPDATE, UPDATEURL, and
KEYSRC.
(PKT_public_key): Ditto.
(RING_TRUST_SIG, RING_TRUST_KEY, RING_TRUST_UID): New consts.
(PKT_ring_trust): New.
(struct packet_struct): Remove member RING_TRUST.
(strcu parse_packet_ctx_s): Add field SKIP_META.
(init_parse_packet): Init SKIPT_META.
* g10/free-packet.c (release_public_key_parts): Free UDPATEURL.
(free_user_id): Ditto.
* g10/mainproc.c (list_node): Remove printing of non-documented "rtv"
lines.
* g10/build-packet.c (build_packet_and_meta): New.
(do_ring_trust): New.
* g10/export.c (write_keyblock_to_output): Use build_packet_and_meta
in backup mode.
(do_export_one_keyblock): Ditto.
* g10/import.c (read_block): Add arg WITH_META. Skip ring trust
packets if that ism not set.
(import): Call read_block WITH_META in restore mode.
* g10/keydb.h (KEYSRC_UNKNOWN, KEYSRC_FILE, KEYSRC_KS, KEYSRC_PREF_KS)
(KEYSRC_WKD, KEYSRC_WKD_SD, KEYSRC_DANE): New constants. They are not
yet used, though.
* g10/keydb.c (parse_keyblock_image): Allow ring trust packets.
(build_keyblock_image): Ditto. Use build_packet_and_meta.
* g10/keyring.c (keyring_get_keyblock): Remove specila treatment of
ring trust packets.
(write_keyblock): Use build_packet_and_meta. Remove special treatment
of ring trust packets and initialization of the signature caches.
--
This patch introduced the framework to store meta data for keys and
user ids in the keyrings/keyboxes. Ring trust packets are
implementation defined and have always been used in gpg to cache the
signature verification status.
Ring trust packets are only exported with the export option "backup"
and only imported with the import option "restore".
The new code uses a cleaner way to handle the ring trust packets: When
the parser reads a ring trust packet and the previously read packet
matches the type of that ring trust packet, the information is stored
in that previously read packet (signature, user id, or primary key)
and the next packet is read immediately. Thus only the parser sees
the ring trust packets. Ring trust packets are written by using the
new function build_packet_and_meta instead of build_packet. That
function writes a ring trust packet when the needed information is
available.
As a side-effect of this patch the signature status cache works again
and "gpg --check-sigs" is thus much faster.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (list_keyblock_colon): Add empty fields 19 and 20.
--
We add them now to early catch error in parsers which arbitrary limit
the number of fields in --with-colon listings.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aQuickSetPrimaryUid): New const.
(opts): New command --quick-set-primary-uid.
(main): Implement it.
* g10/keyedit.c (keyedit_quick_adduid): Factor some code out to ...
(quick_find_keyblock): new func.
(keyedit_quick_revuid): Use quick_find_keyblock.
(keyedit_quick_set_primary): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (gnupg_pk_is_compliant): New.
* g10/keylist.c (print_compliance_flags): New.
(list_keyblock_colon): Call it here.
* sm/keylist.c (print_compliance_flags): New.
(list_cert_colon): Call it here.
--
This patch is to convey information about DE_VS compliant keys to the
caller. The double digit value is used so that parsers do the right
thing and don't just look for a single digit.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c (export_seckeys): Add arg OPTIONS and pass it to
do_export.
(export_secsubkeys): Ditto.
* g10/gpg.c (main): Pass opt.export_options to export_seckeys and
export_secsubkeys
--
Back in the old days we did not used the export options for secret
keys export because of a lot of duplicated code and that the old
secring.gpg was anyway smaller that the pubring.gpg. With 2.1 it was
pretty easy to enable it.
Reported-by: Peter Lebbing
GnuPG-bug-id: 2973
* doc/gpg.texi: Clarify usage and expiration arguments for key
generation.
* tests/openpgp/quick-key-manipulation.scm: Test all variants.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/export.c (parse_export_options): Add "backup" and its alias
"export-backup".
(do_export_one_keyblock): Export ring trust packets in backup mode.
* g10/import.c (parse_import_options): Add "restore" and its alias
"import-restore".
(read_block): Import ring trust packets.
--
These options are intended to, well, backup and restore keys between
GnuPG implementations. These options may eventually be enhanced to
backup and restore all public key related information.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): If the parameter for --faked-system-time
ends with a '!', freeze time at the specified point.
* common/gettime.c (gnupg_set_time): Allow to freeze the time
at an arbitrary time instead of only the current time.
* doc/gpg.texi: Update documentation for --faked-system-time.
--
This patch allows the user to modify the behavior of the
--faked-system-time option: by appending a '!' to the parameter,
time in GnuPG will be frozen at the specified time, instead of
advancing normally from that time onward.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* scd/app.c (app_get_serial_and_stamp): Remove.
(app_get_serialno): New.
(app_write_learn_status): Use send_status_direct.
(app_getattr): Use app_get_serialno for SERIALNO and
send with send_status_direct.
* scd/app-openpgp.c (do_getattr): Likewise.
* scd/command.c (cmd_serialno): Don't send TIMESTAMP of 0.
(cmd_learn): Likewise. Don't inquire with TIMESTAMP of 0.
--
In the SERIALNO protocol, timestamp used to be considered, but had never
used at all. In the new implementation, removed card/token is always
detected and connection becomes invalid, no timestamp is required any
more. Examined scute and poldi as well for this protocol change.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* doc/examples/systemd-user/*.service: Add ExecReload directives to
indicate the canonical way to reload the services.
GnuPG recommends reloading the agent and dirmngr with "gpgconf
--reload". if anyone is running them as systemd user services, they
might ask them to reload in the systemd way, so teach systemd the
right thing to do.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* dirmngr/dns-stuff.c (DEFAULT_TIMEOUT): New.
(opt_timeout): New var.
(set_dns_timeout): New.
(libdns_res_open): Set the default timeout.
(libdns_res_wait): Use configurable timeout.
(resolve_name_libdns): Ditto.
* dirmngr/dirmngr.c (oResolverTimeout): New const.
(opts): New option --resolver-timeout.
(parse_rereadable_options): Set that option.
(main) <aGPGConfList>: Add --nameserver and --resolver-timeout.
* tools/gpgconf-comp.c (gc_options_dirmngr): Add --resolver-timeout
and --nameserver.
* dirmngr/http.c (connect_server): Fix yesterday introduced bug in
error diagnostic.
--
This timeout is a pretty crude thing because libdns has a few other
internal timeouts as well.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (aApplyProfile): New.
(opts): New command --apply-profile.
(main): Implement that command.
* tools/gpgconf-comp.c (option_check_validity): Add arg VERBATIM.
(change_options_program): Ditto.
(change_one_value): Ditto.
(gc_component_change_options): Ditto.
(gc_apply_profile): New.
--
Here is an example for a profile
--8<---------------cut here---------------start------------->8---
# foo.prf - Sample profile
[gpg]
compliance de-vs
default-new-key-algo brainpoolP256r1+brainpoolP256r1
[gpgsm]
enable-crl-checks
[gpg-agent]
default-cache-ttl 900
max-cache-ttl [] 3600
no-allow-mark-trusted
no-allow-external-cache
enforce-passphrase-constraints
min-passphrase-len 9
min-passphrase-nonalpha 0
[dirmngr]
keyserver hkp://keys.gnupg.net
allow-ocsp
--8<---------------cut here---------------end--------------->8---
Note that flags inside of brackets are allowed after the option name.
The only defined flag for now is "[default]". In case the value
starts with a bracket, it is possible to insert "[]" as a nop-flag.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg.texi: Remove comment about options being parsed in-order.
They aren't.
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Fixes-commit: 7572d27
* doc/DETAILS: Add SIGN-DAYS and ENCRYPT-DAYS to the TOFU_STATS status
line.
* g10/tofu.c (write_stats_status): Take additional parameters
signature_days and encryption_days. Update callers. Include them in
the tfs record and TOFU status lines.
(show_statistics): Compute the number of days on which we saw a
message signed by FINGERPRINT, and the number of days on which we
encrypted a message to it.
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* doc/gpg.texi: Improve the subsection on unattended key generation by
suggesting the quick key manipulation interface as an alternative, and
by suggesting alternatives to '%pubring' and '%secring'. Simplify
examples accordingly.
GnuPG-bug-id: 2400
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gpg.texi: New subsections on programmatic use of GnuPG,
ephemeral home directories, and the quick key manipulation interface.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename options.
(main): Update errors.
* doc/gpg.texi: Update accordingly.
--
I decided not to keep the old versions as aliases in the documentation
because the interface is a fairly recent addition.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename option.
* g10/call-agent.c (agent_scd_learn): Update comment.
* doc/gpg.texi: Update accordingly.
--
This change has a surprising side effect. Previously, --edit was an
alias for --edit-key, because the argument parser actually accepts
unique prefixes of all options. With this change, however, --edit is
ambiguous.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename option.
* doc/gpg.texi: Update accordingly.
--
This is a rather long name, but I believe that this command is rarely
used, and in places where it is used frequently, the process is likely
automated.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gpg.texi: Add the old version of every option that was updated
with the last change set.
* doc/gpgsm.texi: Likewise.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* configure.ac: Add option --disable-libdns
(USE_LIBDNS): New ac_subst and am_conditional.
(USE_C99_CFLAGS): Set only if libdns is used.
* dirmngr/Makefile.am (dirmngr_SOURCES): Move dns.c and dns.h to ...
(dirmngr_SOURCES) [USE_LIBDNS0: here.
(t_common_src): Ditto.
* dirmngr/dirmngr.c (oRecursiveResolver): New constant.
(opts): New option "--recursive-resolver".
(parse_rereadable_options): Set option.
* dirmngr/t-dns-stuff.c (main): Add option --recursive-resolver.
* dirmngr/server.c (cmd_getinfo): Depend output of "dnsinfo" on the
new variables.
* dirmngr/dns-stuff.c: Include dns.h only if USE_DNSLIB is defined.
Also build and call dnslib functions only if USE_DNSLIB is defined.
(recursive_resolver): New var.
(enable_recursive_resolver): New func.
(recursive_resolver_p): New func.
--
In case users run into problems building GnuPG, the configure option
allows to disable that support and continue w/o Tor support using the
system resolver.
--recursive-resolver was easy enough to implement and may be useful in
some situation. It does not fully work, though.
Signed-off-by: Werner Koch <wk@gnupg.org>
* autogen.rc: Remove '--with-adns' argument.
* configure.ac: Remove check for ADNS.
* dirmngr/dns-stuff.c: Remove all code that uses ADNS.
* dirmngr/server.c (cmd_getinfo): Update status line.
* doc/dirmngr.texi: Do not mention ADNS.
--
We used ADNS to support queries over Tor. However, our patch to ADNS
that adds Tor support was never accepted upstream. Furthermore, there
are other shortcomings that let us to consider alternatives.
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gpg.texi: Document that fact.
* g10/keygen.c (quick_generate_keypair): Use a default value.
* tests/openpgp/quick-key-manipulation.scm: Test that fact.
GnuPG-bug-id: 2701
Signed-off-by: Justus Winter <justus@g10code.com>
* common/openpgp-oid.c (openpgp_is_curve_supported): Add optional arg
R_ALGO and change all callers.
* common/util.h (GPG_ERR_UNKNOWN_FLAG): New error code.
* g10/options.h (struct opt): Add field DEF_NEW_KEY_ALGO.
* g10/gpg.c (oDefaultNewKeyAlgo): New enum.
(opts): New option "--default-new-key-algo".
(main): Set the option.
* g10/keygen.c: Remove DEFAULT_STD_ FUTURE_STD_ constants and replace
them by ...
(DEFAULT_STD_KEY_PARAM, FUTURE_STD_KEY_PARAM): new string constants.
(get_keysize_range): Remove arg R_DEF and return that value instead.
Change all callers.
(gen_rsa): Use get_keysize_range instead of the removed
DEFAULT_STD_KEYSIZE.
(parse_key_parameter_part): New function.
(parse_key_parameter_string): New function.
(quick_generate_keypair): Refactor using parse_key_parameter_string.
(generate_keypair): Ditto.
(parse_algo_usage_expire): Ditto.
--
This new option is intended to be used in the forthcoming
--set-profile command of gpgconf. It allows to provide a gpg
configuration with custom defaults for a new key using the simple
commands which use the default algorithm set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (oStandardResolver): New constant.
(opts): New option --standard-resolver.
(parse_rereadable_options): Set option.
* dirmngr/dns-stuff.c: Refactor all code to support the new option.
(standard_resolver): New var.
(enable_standard_resolver, standard_resolver_p): New func.
* dirmngr/http.c (connect_server): Remove USE_DNS_SRV build
conditional.
* dirmngr/ks-engine-hkp.c (map_host): Ditto.
* dirmngr/server.c (cmd_getinfo) <dnsinfo>: Take care of new option
* configure.ac (HAVE_ADNS_IF_TORMODE): Remove var ADNSLIB. ac_define
USE_ADNS in the adns checking code. Remove options --disable-dns-srv
and --disable-dns-cert. Always look for the system resolver. Print
warning if no system resolver was found.
(USE_DNS_CERT, USE_DNS_SRV): Remove ac_defines.
(HAVE_SYSTEM_RESOLVER): New ac_define.
(USE_DNS_SRV): Remove am_conditional; not used anyway.
--
This option allows for runtime switching to the system's standard
resolver. This is mainly useful to work around possible bugs in the
optional resolver libraries (as of now ADNS). Note that on Windows
there is no code to use systems's resolver and thus for full
functionality dirmngr must be build with a separate resolver.
This patch also does way with configure options to disable the use of
CERT and SRV records.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/DETAILS (TOFU_STATS): Rename the VALIDITY field to SUMMARY. Add
a new field called VALIDITY.
* g10/tofu.c (write_stats_status): Update output accordingly.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Change TOFU_STATS as discussed offline with Werner, Justus and Andre.
* doc/Makefile.am: Ship gpg-agent-browser.socket alongside the other
systemd user service example files.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* configure.ac: Define DIRMNGR_DEFAULT_KEYSERVER.
* dirmngr/server.c (ensure_keyserver): Use it if no keyservers are set.
* doc/dirmngr.texi: Document this behavior.
--
A user who doesn't specify a keyserver, but asks gnupg to fetch a key
currently just gets a simple error messages "No keyserver available".
If the user is asking to contact a keyserver, we should have a
reasonable default, and not require them to fiddle with settings when
they might not know what settings to choose. This patch makes the
default hkps://hkps.pool.sks-keyservers.net.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* dirmngr/dirmngr.c (http_session_new): If the user isn't talking to
the HKPS pool, and they have not specified any hkp-cacert, then we
should default to the system CAs, rather than nothing.
* doc/dirmngr.texi: Document choice of CAs.
--
Consider three possible classes of dirmngr configuration:
a) no hkps:// keyserver URLs at all (communication with keyservers is
entirely in the clear)
b) hkps:// keyserver URLs, but no hkp-cacert directives
c) hkps:// keyserver URLs, and at least one hkp-cacert directive
class (a) provides no confidentiality of requests.
class (b) currently will never work because the server certificate
cannot be validated.
class (c) is currently supported as intended.
This patch allows users with configurations in class (b) to work as
most users expect (relying on the system certificate authorities),
without affecting users in classes (a) or (c).
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
o minor indentation fix
- wk
* dirmngr/dirmngr.h (struct opt): Add field allow_version_check.
* dirmngr/dirmngr.c (oAllowVersionCheck): New.
(opts): Add --allow-version-check.
(network_activity_seen): New variable.
(parse_rereadable_options): Set opt.allow_version_check.
(main) <aGPGConfList>: Do not anymore set the no change flag for
Windows. Add allow-version-check.
(netactivity_action): Set network_activity_seen.
(housekeeping_thread): Call dirmngr_load_swdb.
* tools/gpgconf-comp.c (gc_options_dirmngr): Add allow-version-check.
Make "use-tor" available at Basic level.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/loadswdb.c (time_of_saved_swdb): Aslo return the "verified"
timestamp.
(dirmngr_load_swdb): Avoid unnecessary disk or network access witout
FORCE. Do not update swdb.lst if it did not change.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oOverrideSessionKeyFD): New.
(opts): Add option --override-session-key-fd.
(main): Handle that option.
(read_sessionkey_from_fd): New.
--
The override-session-key feature was designed to mitigate the effect
of the British RIP act by allowing to keep the private key private and
hand out only a session key. For that use case the leaking of the
session key would not be a problem. However there are other use
cases, for example fast re-decryption after an initial decryption,
which would benefit from concealing the session key from other users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpgv.c (oEnableSpecialFilenames): New.
(opts): Add option --enable-special-filenames.
(main): Implement that option.
--
This is the same option we have in gpg. It allows to use commands
like
gpgv --enable-special-filenames -- '-&3' - <msg 3<msg.sig
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oCompliance): New.
(opts): Add "--compliance".
(parse_tofu_policy): Use a generic description string for "help".
(parse_compliance_option): New.
(main): Add option oCompliance. Factor out code for compliance
setting to ...
(set_compliance_option): new.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
These configuration files and instructions enable clean and simple
daemon supervision on machines that run systemd.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
- Removed the detailed ChangeLog entry because that is not needed for
doc changes.
- Added an entry to doc/examples/README.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
With commit d83ba4897b all system daemon
features have been removed and thus this should be reflected in the
man page.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (query_swdb): Insert new field with the installed
version. Check that the supplied version does not contain a colon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (aQuerySWDB): New.
(opts): Add --query-swdb.
(valid_swdb_name_p): New.
(query_swdb): New.
(main): Implement command --query-swdb.
--
Right now this command is not very useful because dimngr has not yet
been changed to create the swdb.lst. For manual tests the swdb.lst
file from the Net can be used with these additional lines:
.filedate 20161102T130337
.verified 20161102T150000
There were several different variant spellings of "passphrase". This
should fix them all for all English text.
I did notice that po/it.po contains multiple instances of
"passhprase", which also looks suspect to me, but i do not know
Italian, so i did not try to correct it.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* dirmngr/dirmngr.c (main): Add new --supervised command, which is a
mode designed for running under a process supervision system like
systemd or runit.
* doc/dirmngr.texi: document --supervised option.
--
"dirmngr --supervised" is a way to invoke dirmngr such that a system
supervisor like systemd can provide socket-activated startup, log
management, and scheduled shutdown.
When running in this mode, dirmngr:
* Does not open its own listening socket; rather, it expects to be
given a listening socket on file descriptor 3.
* Does not detach from the invoking process, staying in the
foreground instead.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* doc/gpg-agent.texi: document "gpgconf --kill gpg-agent" for manual
agent termination.
This was requested in a side-comment in https://bugs.debian.org/840669
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/options.h (DBG_MPI): New.
* g10/gpg.c (set_debug): Use macro or extra parens for binary operator.
* g10/parse-packet.c (set_packet_list_mode): Use dbg macro.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (get_socket_path): Rename to ...
(get_socket_name): this. This is to comply with the GNU coding guide.
Use xtrymalloc instead of malloc. Do not build for W32.
(map_supervised_sockets): Use strtokenize and set the the socket names
here.
(main): Adjust for above change. Do not close the socket.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (get_socket_path): New function for POSIX systems
to return the path for a provided unix-domain socket.
(map_supervised_sockets): New function to inspect $LISTEN_FDS and
$LISTEN_FDNAMES and map them to the specific functionality offered by
the agent.
(main): Add --supervised command. When used, listen on already-open
file descriptors instead of opening our own.
* doc/gpg-agent.texi: Document --supervised option.
--
"gpg-agent --supervised" is a way to invoke gpg-agent such that a
system supervisor like systemd can provide socket-activated startup,
log management, and scheduled shutdown.
When running in this mode, gpg-agent:
* Does not open its own listening socket; rather, it expects to be
given a listening socket on incoming file descriptors.
* Does not detach from the invoking process, staying in the
foreground instead. Unless otherwise specified, logs are sent to
stderr.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/gpg-agent.c (main): Provide defaults for 'extra-socket' and
'browser-socket', enable ssh socket by default, but do not emit the
'SSH_AUTH_SOCK' variable unless it has been explicitly requested.
* configure.ac (GPG_AGENT_{EXTRA,BROWSER}_SOCK_NAME): New definitions.
* doc/gpg-agent.texi: Update documentation.
--
This change enables the restricted, browser, and ssh socket by
default. Note that in all cases, the user has to do some additional
configuration to her setup to make use of these features. Therefore,
this should not break any existing setups, but makes it simpler to
discover and use these features.
Signed-off-by: Justus Winter <justus@g10code.com>
--
The commands --help, --version, --dump-options are special in that
they can't be abbreciated on the command line. This is to avoid
problems with regular options with the same prefix.
Fixes-commit: 0a27d8a57c4c990fcada4278a1ce2e6fc9043e9
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmgnr/cdblib.c: comment used unnecesary hyphenation
* dirmngr/crlcache.h: comment was iso-8859-1
* doc/contrib.text: list contributors using UTF-8 (now we can
acknowledge many more people using their preferred orthography)
At least one other files remains in a non-UTF-8 encoding, which i'm
not sure what to do with:
- build-aux/speedo/w32/inst.nsi is ISO-8859-1, but maybe Windows needs
it that way?
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/keygen.c (FUTURE_STD_): New constants.
(parse_expire_string): Handle special keywords.
(parse_algo_usage_expire): Allow "future-default". Simplify call to
parse_expire_string.
(quick_generate_keypair): Always allow an expiration date. Replace
former "test-default" by "future-default".
--
Using an expiration date is pretty common, thus we now allow the
creation of a standard key with expiration date.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c [HAVE_INOTIFY_INIT]: Include sys/inotify.h.
(oDisableCheckOwnSocket): New.
(opts): Add --disable-check-own-socket.
(disable_check_own_socket): New var.
(parse_rereadable_options): Set that var.
(my_inotify_is_name) [HAVE_INOTIFY_INIT]: New.
(handle_connections) [HAVE_INOTIFY_INIT]: New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c: Include "sqrtu32.h".
(struct tofu_dbs_s.s): Rename get_trust_gather_other_keys to
get_trust_gather_signature_stats. Add new field
get_trust_gather_encryption_stats.
(initdb): Create the encryptions table.
(ask_about_binding): Show the encryption statistics too.
(tofu_register): Rename from this...
(tofu_register_signature): ... to this and update callers.
(tofu_register_encryption): New function.
(write_stats_status): Add parameters encryption_count,
encryption_first_done and encryption_most_recent. Update callers.
Compute the trust using the euclidean distance of the signature and
signature count. Compare with twice the threshold. Include
encryption count information in the TFS and TOFU_STATS lines.
(show_statistics): Also get information about the encrypted messages.
* g10/trustdb.c (tdb_get_validity_core): Use it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/import.c (impex_filter_getval): Add properties for key packets.
* g10/export.c (export_drop_subkey): New var.
(cleanup_export_globals): Release that var.
(parse_and_set_export_filter): Add filter "drop-subkey".
(apply_drop_subkey_filter): New.
(do_export_stream): Run that filter.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oWithTofuInfo): New.
(opts): Add --with-tofu-info.
(main): Set opt.with_tofu_info.
* g10/options.h (struct opt): Add field WITH_TOFU_INFO.
* g10/tofu.c (show_statistics): Add optional arg OUTFP and enter
special mode if not NULL. Change all callers.
(tofu_write_tfs_record): New.
* g10/keylist.c (list_keyblock_colon): Do not print the tofu policy as
part of the "uid" record. Print a new "tfs" record if the new option
is set.
* tests/openpgp/tofu.scm (getpolicy): Change from UID to TFS record.
--
A separate option is required to avoid slowing down key listings.
Foer example the current code takes for a keylisting in tofu+pgp mode
17 seconds while it takes more than 5 minutes if the option is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (write_stats_status): Add arg FP to print a colon
formated line. Adjust for changed TOFU_STATS interface.
(show_statistics): Let the query return timestamps and use
gnupg_get-time to compute the "time ago" values.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (opts): Remove fields 'system_service' and
'system_daemon'.
* common/homedir.c (dirmngr_sys_socket_name): Remove.
(dirmngr_user_socket_name): Rename to ...
(dirmngr_socket_name): this. Change call callers.
* common/asshelp.c (start_new_dirmngr): Remove the system socket
feature.
* tools/gpgconf.c (list_dirs): Do not print "dirmngr-sys-socket".
* sm/server.c (gpgsm_server): Adjust for removed system socket feature.
* dirmngr/server.c (cmd_getinfo): Ditto.
(cmd_killdirmngr): Remove check for system daemon.
(cmd_reloaddirmngr): Ditto.
* dirmngr/dirmngr.c (USE_W32_SERVICE): Remove macro.
(aService): Remove.
(opts): Remove --service.
(w32_service_control): Remove.
(real_main, call_real_main) [W32]: Remove wrapper.
(main): Remove Windows system service feature. Remove system dameon
feature. Use only the "~/.gnupg/dirmngr_ldapservers.conf" file.
* dirmngr/certcache.c (load_certs_from_dir): Remove warning in the
system dameon case.
* dirmngr/crlcache.c (DBDIR_D): Always use "~/.gnupg/crls.d".
* dirmngr/ocsp.c (validate_responder_cert): Do not call
validate_cert_chain which was used only in system daemon mode.
* dirmngr/validate.c (validate_cert_chain): Always use the code.
--
We are now starting dirmngr as needed as a user daemon. The
deprecated system daemon mode does not anymore make sense. In case a
system wide daemon is required, it is better to setup a dedicated
account to run dirmngr and tweak socket permissions accordingly.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Add field 'sender_list'.
* g10/gpg.c: Include mbox-util.h.
(oSender): New.
(opts): Add option "--sender".
(main): Parse option.
--
This option will eventually be used for more advanced purposes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h: Include stdint.h.
(struct opt): Add field 'input_size_hint'.
* g10/gpg.c (oInputSizeHint): New.
(opts): Add --input-size-hint.
(main): Set opt.input_size_hint.
* g10/progress.c (write_status_progress): Use the hint.
--
This is a prerequisite to fix
GnuPG-bug-id: 2368
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Remove field tofu_db_format.
* g10/gpg.h (server_control_s): Add fields tofu.batch_update_ref and
tofu.batch_update_started.
* g10/gpg.c (parse_tofu_db_format): Remove.
(main): Make option --tofu-db-format obsolete.
* g10/tofu.c: Major rework. Remove the pretty complicated and slower
split format and with that all the caching. Use the dbs struct
directly. Move global vars for batch update into CTRL. Change
calling conventions of some function to take CTRL or DBS pointers
instead of the former low-level database pointer.
--
The split database format might have been nice for use with Unison but
it bypasses the concept of a relational database by doing parts of
this itself and also risking deadlocks. Working with the Tofu
database for debugging or experiments is also not possible with parts
of the database logic implemented in gpg.
The Tofu support is quite new and we can assume that it is not in real
use now. Thus we better remove that now so that we do not need to
maintain it for all future.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): initialize opt.emit_version to 0
* doc/gpg.texi: document different default for --emit-version
--
The version of GnuPG in use is not particularly helpful. It is not
cryptographically verifiable, and it doesn't distinguish between
significant version differences like 2.0.x and 2.1.x.
Additionally, it leaks metadata that can be used to distinguish users
from one another, and can potentially be used to target specific
attacks if there are known behaviors that differ between major
versions.
It's probably better to take the more parsimonious approach to
metadata production by default.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/keylist.c (list_keyblock_colon): Remove arg FPR. Always print
fingerprint records. For secret keys always print keygrip records.
--
The fingerprint should always be used thus we should always print it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* tools/gpgconf.c (main) <aListDir>: Factor code out to ...
(list_dirs): new. Rewrite to use a table. Allow selection of a
items. Add "agent-ssh-socket".
--
This change makes the use of gpgconf in scripts easier. For example,
to set the envvar with the name of the socket used by ssh, it is now
possible to do this:
SSH_AUTH_SOCK="$(gpgconf --list-dirs agent-ssh-socket)"
which guarantees that the right name is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (EXPORT_PKA_FORMAT): New.
* g10/keylist.c (list_keyblock_pka): Do not use DANE flag.
* g10/export.c: Include zb32.h.
(parse_export_options): Add options "export-pka" and "export-dane".
(do_export): Do not armor if either of these option is set.
(print_pka_or_dane_records): New.
(do_export_stream): Implement new options.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/mkdefsinc.c (print_filename): New.
(main): Use it here.
--
Our Jenkins uses an @ in directory names and thus our builds break.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oRecipientFile, oHiddenRecipientFile): New.
(opts): Add options --recipient-file and --hidden-recipient-file.
(main): Implement them. Also remove duplicate code from similar
options.
* g10/keydb.h (PK_LIST_FROM_FILE): New.
(PK_LIST_SHIFT): Bump up.
* g10/pkclist.c (expand_group): Take care of PK_LIST_FROM_FILE.
(find_and_check_key): Add and implement arg FROM_FILE.
(build_pk_list): Pass new value for new arg.
* g10/getkey.c (get_pubkey_fromfile): New.
* g10/gpgv.c (read_key_from_file): New stub.
* g10/test-stubs.c (read_key_from_file): New stub.
* g10/server.c (cmd_recipient): Add flag --file.
* g10/import.c (read_key_from_file): New.
* tests/openpgp/defs.scm (key-file1): New.
(key-file2): New.
* tests/openpgp/setup.scm: Add their private keys and import the
key-file1.
* tests/openpgp/encrypt.scm: Add new test.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoKeyring): New.
(opts): Add "--no-keyring".
(main): Do not register any keyring if the option is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oImportFilter): New.
(opts): Add --import-filter.
(main): Handle option.
* g10/import.c: Include recsel.h, init.h, and mbox-util.h.
(import_keep_uid): New global var.
(cleanup_import_globals): New.
(parse_and_set_import_filter): New.
(filter_getval): New.
(apply_keep_uid_filter): New.
(import_one): Apply filter if set.
--
Funny new option. It can for example be used to export a key with
only one user id:
gpg --no-options --import --import-options import-export \
--import-filter keep-uid='mbox=wk@gnupg.org' \
< full-key.pub > key-with-one-uid.pub
More features will eventually be added.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/revoke.c (get_default_uid_revocation_reason): New.
* g10/keyedit.c (menu_revuid): Break out creation of uid revocation
into new function core_revuid.
* g10/keyedit.c (keyedit_quick_revuid): New. Selects key and
uid, invokes core_revuid.
* g10/gpg.c (main): Handle --quick-revuid argument.
* doc/gpg.texi: Document --quick-revuid.
--
This functionality is a counterpart to --quick-adduid, and will be
useful for projects that depend programmatically on gpg to revoke user
IDs (one such example is "monkeysphere-host revoke-servicename").
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
- Minor re-indentation work.
- Changed a "0 == memcmp" to "!memcmp"
- Removed tests/openpgp/quick-key-manipulation.test from the
Makefile. This test needs to be converted to gpgscm.
- Removed example from whats-new-in-2.1.txt because that is generated.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/yat2m.c (ATTR_PRINTF, ATTR_NR_PRINTF, ATTR_MALLOC): New.
(die, err, inf, xmalloc, xcalloc): New prototypes with attributes.
(get_section_buffer): Take care of !N_SECTIONS.
(proc_texi_cmd): Cast precision format arg.
(proc_texi_buffer): Do not set IN_CMD when not used afterwards.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (parse_import_options): Add option "import-export".
(write_keyblock_to_output): New.
(import_one): Implement option.
--
We are now in the import export business.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/Makefile.am (dist_pkgdata_DATA): Move qualified.txt and
com-certs.pem to ...
(EXTRA_DIST): here.
--
With Let's Encrypt there is no more need to push CA Cert.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Add field flags.rfc4880bis.
* g10/gpg.c (oRFC4880bis): new.
(opts): add --rfc4880bis.
(main): Implement that and print a warning.
--
This is option enables experimental features which may be dropped or
changed with the next release.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Remove deprecation warning.
--
Most options for the keyserver have been moved to dirmngr and thus it
does not make sense to favor "--keyserver-options auto-key-retrieve"
over the direct options --auto-key-retrieve and --no-auto-key-retrieve.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oDisableSignerUID): New.
(opts): New option '--disable-signer-uid'.
(main): Set option.
* g10/options.h (opt): Add field flags.disable_signer_uid.
* g10/sign.c: Include mbox-util.h.
(mk_notation_policy_etc): Embed the signer's uid.
* g10/mainproc.c (check_sig_and_print): Do not use WKD for auto key
retrieval if --disable-signer-uid is used.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_signature): Add field 'signers_uid'.
* g10/parse-packet.c (parse_signature): Set this field.
* g10/free-packet.c (free_seckey_enc): Free field.
(copy_signature): Copy field.
* g10/mainproc.c (akl_has_wkd_method): New.
(check_sig_and_print): Extend NEWSIG status. If WKD is enabled try to
locate a missing key via the signature's Signer's User ID sub-packet.
Do this right before trying a keyserver lookup.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add option "none" to --keyid-format.
* g10/options.h (KF_NONE): New.
* g10/keyid.c (format_keyid): Implement that.
(keystr): Use format "long" is KF_NONE is in use.
(keystr_with_sub): Ditto.
* g10/keylist.c (list_keyblock_print): Adjust indentaion for KF_NONE.
Factor some code out to ...
(print_key_line): new.
(print_fingerprint): Add mode 20.
* g10/mainproc.c (list_node): Use print_key_line. Replace MAINKEY by
flags.primary in the PK. Fix putting a " revoked..." string into the
colons format.
* g10/pkclist.c (do_edit_ownertrust): Use print_key_line. This
slightly changes the putput format.
* g10/revoke.c (gen_standard_revoke): Use print_key_line. This may
also put "expires: " into the output.
--
Due to user experience problems with the keyid and we better allow to
show the fingerprint instead. Note that we do not support v3 keys
anymore and thus there is no technical need for a user to know the
keyid.
GnuPG-bug-id: 2379
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (DEFAULT_STD_SUBKEYUSE): New.
(ask_keysize): Factor code out to ...
(get_keysize_range, fixup_keysize): new.
(parse_parameter_usage): Factor parsing out to ...
(parse_usagestr): new. Allow use of "encr" as alias for "encrypt".
(parse_subkey_algostr_usagestr): New.
(generate_subkeypair): Add new args. Implement unattended mode.
* g10/keyedit.c (keyedit_quick_sign): Factor some code out to ...
(find_by_primary_fpr): new.
(keyedit_quick_addkey): New.
* g10/gpg.c (aQuickAddKey): New.
(opts): Add --quick-addkey.
(main): Implement.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (AC_CHECK_FUNCS): Remove tests for funopen.
--
Meanwhile we are using the portable functions from libgpg-error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (show_statistics): Print TOFU STATS with formatting
characters.
--
We better leave the non-breaking space character in the status
messages so that the caller can make use of them.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_KEY_CONSIDERED): New.
* g10/getkey.c: Include status.h.
(LOOKUP_NOT_SELECTED, LOOKUP_ALL_SUBKEYS_EXPIRED): New.
(finish_lookup): Add arg R_FLAGS. Count expired and revoked keys and
set flag. Check a requested usage before checking for expiraion or
revocation.
(print_status_key_considered): New.
(lookup): Print new status.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_delete_key): Make the --force option depend on
--disallow-loopback-passphrase.
* g10/call-agent.c (agent_delete_key): Add arg FORCE.
* g10/delkey.c (do_delete_key): Pass opt.answer_yes to
agent_delete_key.
--
Unless the agent has been configured with
--disallow-loopback-passpharse an unattended deletion of a secret key
is now possible with gpg by using --batch _and_ --yes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oNoAllowLoopbackPinentry): New.
(opts): Add --no-allow-loopback-pinentry. Hide
description of --allow-loopback-pinentry.
(parse_rereadable_options): Set opt.allow_loopback_pinentry by
default.
(main): Replace allow-loopback-pinentry by no-allow-loopback-pinentry
in the gpgconf list.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Ditto.
--
Given that a user can anyway change that options in the gpg-agent.conf
file and that gpg needs to be invoked with --pinentry-mode=loopback
the former default does not make much sense - in that option is useful
at all. There was a discussion of this topic on gnupg-devel in April
without a clear result. So we try this new default and just in case
real problems are found for the majority of installations, we can
revert that. The new default is also aligned with GnuPG's policy to
make its use easier and only require users with very high security
standards to tweak certain options (those users have anyway modeled
their threat model and configured their software according to this).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (parse_auto_key_locate): Add method "wkd".
(get_pubkey_byname): Implement that method. Also rename a variable.
* g10/call-dirmngr.c (gpg_dirmngr_wkd_get): New.
* g10/keyserver.c (keyserver_import_wkd): New.
* g10/test-stubs.c (keyserver_import_wkd): Add stub.
* g10/gpgv.c (keyserver_import_wkd): Ditto.
* g10/options.h (opt): Add field 'with_wkd_hash'.
(AKL_WKD): New.
* g10/gpg.c (oWithWKDHash): New.
(opts): Add option --with-wkd-hash.
(main): Set that option.
* g10/keylist.c (list_keyblock_print): Implement that option.
--
The Web Key Directory is an experimental feature to retrieve a key via
https. It is similar to OpenPGP DANE but also uses an encryption to
reveal less information about a key lookup.
For example the URI to lookup the key for Joe.Doe@Example.ORG is:
https://example.org/.well-known/openpgpkey/
hu/example.org/iy9q119eutrkn8s1mk4r39qejnbu3n5q
(line has been wrapped for rendering purposes). The hash is a
z-Base-32 encoded SHA-1 hash of the mail address' local-part. The
address wk@gnupg.org can be used for testing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/mkdefsinc.c (main): Add double include guard. Set variable
gpgtwohack. Define macros gpgname and gpgvname.
* doc/gpg.texi: Remove macro definition for gpgname. Use Texinfo var
gpgtwohack to prepare the man pages. Use @gpgname everywhere.
* doc/gpgv.texi: Likewise.
* doc/Makefile.am (myman_pages): Remove gpg2.1 and gpgv2.1 but add
them depending on USE_GPG2_HACK.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgsm.texi: Document '--pinentry-mode' and '--passphrase-fd'.
* sm/Makefile.am (gpgsm_SOURCES): Add new files
* sm/call-agent.c (struct default_inq_parm_s): New definition.
(start_agent): Pass in the pinentry mode.
(default_inq_cb): Handle 'PASSPHRASE' and 'NEW_PASSPHRASE' inquiries.
Adapt all call sites to the new callback cookie.
* sm/gpgsm.c (cmd_and_opt_values): Add new values.
(opts): Add new options.
(main): Handle new options.
* sm/gpgsm.h (struct opt): Add field 'pinentry_mode'.
* sm/passphrase.c: New file.
* sm/passphrase.h: Likewise.
GnuPG-bug-id: 1970
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gpgsm.texi: Drop description.
* sm/gpgsm.c (cmd_and_opt_values): Drop enum value.
(opts): Drop argument.
(main): Drop argument handling.
* sm/gpgsm.h (struct opt): Drop field 'fixed_passphrase'.
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gnupg-module-overview.svg: New.
* doc/debugging.texi (Component interaction): New.
* doc/Makefile.am (EXTRA_DIST): Add PNG and PDF versions of
gnupg-module-overview.svg. Remove two eps files.
(BUILT_SOURCES): Add gnupg-module-overview.pdf and .png. Remove
gnupg-card-architecture.epsl
(gnupg_TEXINFOS): Add gnupg-module-overview.svg
(gnupg.dvi): New.
(DISTCLEANFILES): Remove build eps files.
--
Many thanks to Emanuel Schütze for helping with the redesign of the
module overview. The original file has been used by mere for years in
talks but was never a proper part of GnuPG.
The EPS files have been removed due to their size. Thus to build the
"dvi" target the convert tool is required.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg-agent.texi (Agent Options): Add comment to the description
of --debug-quick-random that rngd can also be used to quickly generate
key.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/revoke.c (gen_standard_revoke): Improve header text for the
file. Add info output.
--
GnuPG-bug-id: 1724
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add LIST_SHOW_USAGE.
--
The usage flags are often useful and they don't take away much space
in a key listing. Thus it is better to have them enabled by default.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_WARNING): New.
* g10/call-agent.c (warn_version_mismatch): New.
(start_agent): Call warn function.
* g10/call-dirmngr.c: Include status.h.
(warn_version_mismatch): New.
(create_context): Call warn function.
* sm/call-agent.c (warn_version_mismatch): New.
(start_agent): Call warn function.
(gpgsm_agent_learn): Call warn function.
* sm/call-dirmngr.c (warn_version_mismatch): New.
(prepare_dirmngr): Call warn function.
--
We have seen too often bug reports which are due to still running old
versions of the daemons. To catch this problematic use we now print
warning messages and also provide the warning via the status
interface.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (opt): Turn field 'keyserver' into an strlist.
* dirmngr/dirmngr.c (parse_rereadable_options): Allow multiple
--keyserver options.
* dirmngr/server.c (server_local_s): Add field 'tor_state'.
(release_uri_item_list): New.
(release_ctrl_keyservers): Use it.
(start_command_handler): Release list of keyservers.
(is_tor_running): New.
(cmd_getinfo): Re-implement "tor" subcommand using new fucntion.
(ensure_keyserver): Rewrite.
* g10/dirmngr-conf.skel: Add two keyserver options.
--
This feature is independent of --use-tor and automagically uses Tor if
available. The dirmngr.conf file needs to specify two keyservers to
make this work. For new installations this is done using the skeleton
file. This feature requires the Libassuan 2.4.2 to work.
This patch also fixes a memory leak of opt.keyserver en passant.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (menu_select_key): Take an additional argument, p.
Update callers. If P is a hex string, then assume that P is a key id
or fingerprint and select subkeys with matching key ids or
fingerprints.
* doc/gpg.texi: Update documentation for the key subcommand.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1423
Debian-bug-id: 610336
* g10/options.h (opt): Add field only_sign_text_ids.
* g10/gpg.c (enum cmd_and_opt_values): Add value oOnlySignTextIDs.
(opts): Handle oOnlySignTextIDs.
(main): Likewise.
* g10/keyedit.c (sign_uids): If OPT.ONLY_SIGN_TEXT_IDS is set, don't
select non-text based IDs automatically.
(keyedit_menu): Adapt the prompt asking to sign all user ids according
to OPT.ONLY_SIGN_TEXT_IDS.
* doc/gpg.texi: Document the new option --only-sign-text-ids.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1241
Debian-bug-id: 569702
* doc/gpg.texi: Update the description of some options which are
now enabled by default.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* g10/options.h: Add additional_weak_digests linked list to opts.
* g10/main.h: Declare weakhash linked list struct and
additional_weak_digest() function to insert newly-declared weak
digests into opts.
* g10/misc.c: (additional_weak_digest): New function.
(print_digest_algo_note): Check for deprecated digests; use proper
gcry_md_algos type.
* g10/sig-check.c: (do_check): Reject weak digests in addition to MD5.
* g10/gpg.c: Add --weak-digest option to gpg.
* doc/gpg.texi: Document gpg --weak-digest option.
* g10/gpgv.c: Add --weak-digest option to gpgv.
* doc/gpgv.texi: Document gpgv --weak-digest option.
--
gpg and gpgv treat signatures made over MD5 as unreliable, unless the
user supplies --allow-weak-digests to gpg. Signatures over any other
digest are considered acceptable.
Despite SHA-1 being a mandatory-to-implement digest algorithm in RFC
4880, the collision-resistance of SHA-1 is weaker than anyone would
like it to be.
Some operators of high-value targets that depend on OpenPGP signatures
may wish to require their signers to use a stronger digest algorithm
than SHA1, even if the OpenPGP ecosystem at large cannot deprecate
SHA1 entirely today.
This changeset adds a new "--weak-digest DIGEST" option for both gpg
and gpgv, which makes it straightforward for anyone to treat any
signature or certification made over the specified digest as
unreliable.
This option can be supplied multiple times if the operator wishes to
deprecate multiple digest algorithms, and will be ignored completely
if the operator supplies --allow-weak-digests (as before).
MD5 is still always considered weak, regardless of any further
--weak-digest options supplied.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Capitialized some comments, shorted a line in do_check, and changed
subject to name the option. -wk
* dirmngr/dirmngr.c (set_tor_mode): New.
(main, reread_configuration): Call it.
* dirmngr/http.c (http_raw_connect, send_request): Check whether TOR
mode is enabled if the FORCE_TOR flag is given.
--
The patch for http.c is a sanity check because tor mode is anyway
global as long as the Assuan socket wrappers are used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Check for sqlite3.
(SQLITE3_CFLAGS): AC_SUBST it.
(SQLITE3_LIBS): Likewise.
* g10/Makefile.am (AM_CFLAGS): Add $(SQLITE3_CFLAGS).
(gpg2_SOURCES): Add tofu.h and tofu.c.
(gpg2_LDADD): Add $(SQLITE3_LIBS).
* g10/tofu.c: New file.
* g10/tofu.h: New file.
* g10/options.h (trust_model): Define TM_TOFU and TM_TOFU_PGP.
(tofu_db_format): Define.
* g10/packet.h (PKT_signature): Add fields digest and digest_len.
* g10/gpg.c: Include "tofu.h".
(cmd_and_opt_values): Declare aTOFUPolicy, oTOFUDefaultPolicy,
oTOFUDBFormat.
(opts): Add them.
(parse_trust_model): Recognize the tofu and tofu+pgp trust models.
(parse_tofu_policy): New function.
(parse_tofu_db_format): New function.
(main): Initialize opt.tofu_default_policy and opt.tofu_db_format.
Handle aTOFUPolicy, oTOFUDefaultPolicy and oTOFUDBFormat.
* g10/mainproc.c (do_check_sig): If the signature is good, copy the
hash to SIG->DIGEST and set SIG->DIGEST_LEN appropriately.
* g10/trustdb.h (get_validity): Add arguments sig and may_ask. Update
callers.
(tdb_get_validity_core): Add arguments sig and may_ask. Update
callers.
* g10/trust.c (get_validity) Add arguments sig and may_ask. Pass them
to tdb_get_validity_core.
* g10/trustdb.c: Include "tofu.h".
(trust_model_string): Handle TM_TOFU and TM_TOFU_PGP.
(tdb_get_validity_core): Add arguments sig and may_ask. If
OPT.TRUST_MODEL is TM_TOFU or TM_TOFU_PGP, compute the TOFU trust
level. Combine it with the computed PGP trust level, if appropriate.
* g10/keyedit.c: Include "tofu.h".
(show_key_with_all_names_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/keylist.c: Include "tofu.h".
(public_key_list): Also show the PGP stats if the trust model is
TM_TOFU_PGP.
(list_keyblock_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/pkclist.c: Include "tofu.h".
* g10/gpgv.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* g10/test-stubs.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* doc/DETAILS: Describe the TOFU Policy field.
* doc/gpg.texi: Document --tofu-set-policy, --trust-model=tofu,
--trust-model=tofu+pgp, --tofu-default-policy and --tofu-db-format.
* tests/openpgp/Makefile.am (TESTS): Add tofu.test.
(TEST_FILES): Add tofu-keys.asc, tofu-keys-secret.asc,
tofu-2183839A-1.txt, tofu-BC15C85A-1.txt and tofu-EE37CF96-1.txt.
(CLEANFILES): Add tofu.db.
(clean-local): Add tofu.d.
* tests/openpgp/tofu.test: New file.
* tests/openpgp/tofu-2183839A-1.txt: New file.
* tests/openpgp/tofu-BC15C85A-1.txt: New file.
* tests/openpgp/tofu-EE37CF96-1.txt: New file.
* tests/openpgp/tofu-keys.asc: New file.
* tests/openpgp/tofu-keys-secret.asc: New file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/options.h (opt): Add field "print_dane_records".
* g10/gpg.c (oPrintDANERecords): new.
(opts): Add --print-dane-records.
(main): Set that option.
* g10/export.c (do_export): Remove EXPORT_DANE_FORMAT handling.
(do_export_stream): Add EXPORT_DANE_FORMAT handling.
* g10/keylist.c (list_keyblock_pka): Implement DANE record printing.
* g10/gpgv.c (export_pubkey_buffer): New stub.
* g10/test-stubs.c (export_pubkey_buffer): New stub.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (parse_rereadable_options): Do tilde expansion and
check for cert file existance in option --hkp-cacert.
--
GnuPG-bug-id: 2120
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_refresh): Change return type to
gpg_error_t. Use gpg_dirmngr_ks_list to print the name of the
keyserver to use.
(keyserver_search): Do not print the "no keyserver" error
message. The same error is anyway returned from dirmngr.
* g10/call-dirmngr.c (ks_status_parm_s): Add field "keyword".
(ks_status_cb): Handle other status keywords.
(gpg_dirmngr_ks_list): New.
* tools/gpgconf-comp.c (gc_options_gpg): Deprecate "keyserver".
(gc_options_dirmngr): Add "Keyserver" group and "keyserver".
--
Along with the corresponding dirmngr change this option allows to
configure the keyserver only in dirmngr.conf. Existing
configurations will continue to work. However, GUIs using gpgconf
now the keyserver option under the dirmngr (aka Key Acquirer) tab
unless they are in export mode in which the keyserver option is also
show for gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (oKeyServer): New.
(opts): Add "keyserver".
(parse_rereadable_options): Parse that options
(main): Add option to the gpgconf list.
* dirmngr/dirmngr.h (opt): Add field "keyserver".
* dirmngr/server.c (ensure_keyserver): New.
(make_keyserver_item): New. Factored out from
(cmd_keyserver): here. Call ensure_keyserver.
(cmd_ks_search): Call ensure_keyserver.
(cmd_ks_get): Ditto.
(cmd_ks_fetch): Ditto.
(cmd_ks_put): Ditto.
--
This option specifies the keyserver to be used if the client does not
set another keyserver. We want to fade out the use of --keyserver in
gpg.conf in favor of specifying it here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (print_and_check_one_sig): Add arg "extended" and
print an asterisk for the chosen selfsig.
(check_all_keysigs): Add arg "only_selfsig"
(keyedit_menu) <cmdCHECK>: Add optional arg "selfsig".
--
Using "check selfsig" prints only the self-signatures and indicates
the chosen selfsig with an asterisk.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Remove --no-sig-create-check.
* g10/options.h (struct opt): Remove field no_sig_create_check.
* g10/sign.c (do_sign): Always check unless it is RSA and we are using
Libgcrypt 1.7.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_FAILURE): New.
* g10/cpr.c (write_status_failure): New.
* g10/gpg.c (main): Call write_status_failure for all commands which
print an error message here.
* g10/call-agent.c (start_agent): Print an STATUS_ERROR if we can't
set the pinentry mode.
--
This status line can be used similar to the error code returned by
commands send over the Assuan interface in gpgsm. We don't emit them
in gpgsm because there we already have that Assuan interface to return
proper error code. This change helps GPGME to return better error
codes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* po/POTFILES.in (trust.c): Add missing file.
* po/de.po: Changed German validity strings.
* doc/help.de.txt: Ditto.
--
Note that I replaced "uneingeschränkt" in de.po to "ultimativ" to
make the output better readable.
* g10/keydb.h (KEYDB_RESOURCE_FLAG_GPGVDEF): New.
* g10/keydb.c (keydb_add_resource): Take care of new flag.
* g10/gpgv.c (main): Use new flag.
--
GnuPG-bug-id: 2025
Signed-off-by: Werner Koch <wk@gnupg.org>
Daniel Kahn Gillmor