* g10/parse-packet.c (mpi_read_detect_0_removal): New.
(parse_key): Use mpi_read_detect_0_removal for PUBKEY_ALGO_EDDSA
to tweak the checksum.
--
GnuPG-bug-id: 5120
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (proc_symkey_enc): Issue new error code.
(proc_encrypted): Ditto.
--
This allows GPGME to return a better error message than "bad session
key" to the user. Technically we could get run into these errors also
in other cases but this more unlikley. For the command line use we
don't do anything to not change the expected output of the command
line interface.
GnuPG-bug-id: 5943
* g10/gpg.c (main): Set LOG_NO_REGISTRY.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
(show_other_registry_entries): Print "DefaultLogFile".
--
The intention of this mostly forgotten registry entry was to allow for
easy debugging of the tools. However, with the global config
files (and in 2.3 with common.conf) things are anyway better. We
disable the use for the commonly used tools so that it does not look
like calling gpg on the command line seems to block with no output if
the log server (e.g. tcp://1.2.3.4:11111) is not reachable.
* g10/misc.c (openpgp_cipher_algo_mode_name): New.
* g10/decrypt-data.c (decrypt_data): Use function here.
--
With out this change we would see
gpg: cipher algorithm 'AES256' may not be used in
--compliance=de-vs mode
This is confusing because AES256 is compliant. Now we see
gpg: cipher algorithm 'AES256.OCB' may not be used in
--compliance=de-vs mode
which gives a hint on the problem.
* g10/decrypt-data.c (decrypt_data): Add arg compliance_error. Adjust
all callers. Fail on compliance error only in --require-compliance
mode. Make sure to return an error if the buffer is missing; actually
that should be an assert.
* g10/mainproc.c (proc_encrypted): Delay printing of the compliance
mode status. Consult the compliance error now returned by
decrypt_data.
--
The actual case here is that we fail hard if a message has been AEAD
encrypted with one AEAD capable key and also with one passphrase. In
general the preference system takes care of not using AEAD if one
recipient's key does not support it. However, if the sender uses her
own AEAD-capable key _and_ a passphrase the message will be AEAD
encrypted. This change allows to decrypt that anyway along with a
warning message.
Note that this does currently not work in 2.3 due to a non-compliant
libgcrypt. We will however, backport this to 2.2.
* g10/options.h (opt): Add field flags.require_compliance.
* g10/gpg.c (oRequireCompliance): New.
(opts): Add --require-compliance.
(main): Set option.
* g10/mainproc.c (proc_encrypted): Emit error if non de-vs compliant.
(check_sig_and_print): Ditto.
* g10/encrypt.c (encrypt_crypt): Ditto.
--
Note that in the --encrypt and --verify cased other checks may kick in
earlier than this new --require-compliance controlled one.
* g10/Makefile.am (AM_CFLAGS): Reorder.
--
The more specific CLFAGS should come first so these are picked up
first. We really should improve the build system to enforce this
rule. In particular /usr/local/include should come after any more
specific location.
* g10/mainproc.c (mainproc_context): New member
'seen_pkt_encrypted_mdc'.
(release_list): Clear 'seen_pkt_encrypted_mdc'.
(proc_encrypted): Set 'seen_pkt_encrypted_mdc'.
(have_seen_pkt_encrypted_aead): Rename to...
(have_seen_pkt_encrypted_aead_or_mdc): ...this and add check for
'seen_pkt_encrypted_mdc'.
(proc_plaintext): Do not enable extra hash contexts when decrypting
MDC input.
--
Avoiding extra hash contexts speeds up CFB/MDC decryption quite
a lot. For example, decrypting symmetric-key AES-256 encrypted
4 GiB file from RAM to /dev/null sees ~3.4x speed increase on
AMD Ryzen 5800X:
AES256.CFB encryption: 783 MB/s
AES256.CFB decryption: 386 MB/s (before)
AES256.CFB encryption: 1.3 GB/s (after patch)
Note, AEAD is still significantly faster:
AES256.OCB encryption: 2.2 GB/s
AES256.OCB decryption: 3.0 GB/s
GnuPG-bug-id: T5820
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
(cherry picked from commit ab177eed514f7f3432d78e7e6521ad24cc0f4762)
Even 2.2 with the older Libgcrypt 1.8 gets a threefold speedup; see
https://dev.gnupg.org/T5820#155447 (AES-128 vs. AES-256 does not make
a substanial difference)
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c: Remove assert.h and replace all assert calls
by log_assert.
(known_options_gpg): Add "keyserver" as invisible. Remove "options".
(known_pseudo_options_gpg, known_pseudo_options_gpgsm): New.
(gc_component): Add field known_pseudo_options.
(struct read_line_wrapper_parm_s): New.
(read_line_wrapper): New.
(retrieve_options_from_program): Use read_line_wrapper to handle
pseudo options.
(retrieve_options_from_program): Ignore to be ignored options. Add
failsafe code to avoid calling percent_escape with NULL.
--
GnuPG-bug-id: 5341,5800
Due to reading the list of options from the argparser of the
component, we had no more information about the pseudo options and
thus could not emit them. Well, there is just one pseudo option right
now, but with this change we have a generalized concept for them:
Pseudo options are used to convey information from a component to
gpgconf; for example build-in values.
This is a combined backport of patches to master.
* g10/gpg.c (opts): Change oLoadExtensions, oStrict, and oNoStrict to
use ARGPARSE_ignore and remove the code in the option switch.
--
This looks better and is also required for further simplifications of
gpgconf.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 41eb5108ce59244d961df43bbf73b8aa6e95e9cd)
* tools/gpgconf-comp.c: Remove all regular option descriptions. They
are now read in from the component. Also remove a few meanwhile
obsolete options.
* agent/gpg-agent.c: Add option description which were only set in
gpgconf-comp.c.
* dirmngr/dirmngr.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* g10/gpg.c: Ditto.
--
This second part removes all regular option descriptions because they
can be read from the components. A few were missing in the components
and thus moved to there.
Signed-off-by: Werner Koch <wk@gnupg.org>
This is a backport from master (2.3).
* g10/parse-packet.c (sos_read): Backport from 2.3.
(parse_key): Use sos_read for Ed25519 private key.
--
Note that we keep the code of sos_read as same as 2.3. Even it is
set, the GCRYMPI_FLAG_USER2 flag is not used.
GnuPG-bug-id: 5120
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (oForbidGenKey, opts): New option.
(mopt): New local struct
(gen_key_forbidden): New.
(main): Set and handle the option.
--
In large system installation it is sometimes useful to make it a bit
harder for users to generate their own keys. An example is a policy
to not use on-disk keys.
--
The last key is new. As usual the key is on a dedicated card with the
Admin PIN accessible to a few core hackers.
# ------------------------ >8 ------------------------
pub rsa3072 2017-03-17 [SC] [expires: 2027-03-15]
5B80C5754298F0CB55D8ED6ABCEF7E294B092E28
sig R BCEF7E294B092E28 2017-03-17 Andre Heinecke (Release Signing Key)
uid Andre Heinecke (Release Signing Key)
sig 3 BCEF7E294B092E28 2017-03-17 Andre Heinecke (Release Signing Key)
sig 1FDF723CF462B6B1 2017-03-17 Andre Heinecke <aheinecke@intevation.de>
pub ed25519 2020-08-24 [SC] [expires: 2030-06-30]
6DAA6E64A76D2840571B4902528897B826403ADA
uid Werner Koch (dist signing 2020)
sig 3 528897B826403ADA 2020-08-24 Werner Koch (dist signing 2020)
sig 249B39D24F25E3B6 2020-08-24 Werner Koch (dist sig)
sig 63113AE866587D0A 2020-08-24 wk@gnupg.org
sig E3FDFF218E45B72B 2020-08-24 Werner Koch (wheatstone commit signing)
sig F2AD85AC1E42B367 2020-08-24 Werner Koch <wk@gnupg.org>
pub ed25519 2021-05-19 [SC] [expires: 2027-04-04]
AC8E115BF73E2D8D47FA9908E98E9B2D19C6C8BD
uid Niibe Yutaka (GnuPG Release Key)
sig 3 E98E9B2D19C6C8BD 2021-05-19 Niibe Yutaka (GnuPG Release Key)
sig 00B45EBD4CA7BABE 2021-09-14 NIIBE Yutaka <gniibe@fsij.org>
sig E267B052364F028D 2021-09-14 NIIBE Yutaka <gniibe@fsij.org>
pub brainpoolP256r1 2021-10-15 [SC] [expires: 2029-12-31]
02F38DFF731FF97CB039A1DA549E695E905BA208
uid GnuPG.com (Release Signing Key 2021)
sig 3 549E695E905BA208 2021-10-15 GnuPG.com (Release Signing Key 2021)
sig 528897B826403ADA 2021-10-15 Werner Koch (dist signing 2020)
sig E3FDFF218E45B72B 2021-10-15 Werner Koch (wheatstone commit signing)
* g10/tdbdump.c (export_ownertrust): Skip records marked with the
option --trusted-key.
(import_ownertrust): Clear the trusted-key flag.
* g10/tdbio.h (struct trust_record): Add field flags.
* g10/tdbio.c (tdbio_dump_record): Improve output.
(tdbio_read_record, tdbio_write_record): Handle flags.
* g10/trustdb.c (verify_own_keys): Clear stale trusted-keys and set
the flag for new --trusted-keys.
(tdb_update_ownertrust): Add arg as_trusted_key. Update callers.
--
GnuPG-bug-id: 5685
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oOverrideComplianceCheck): New.
(opts): Add new option.
(main): Set option and add check for batch mode.
* g10/options.h (opt): Add flags.override_compliance_check.
* g10/sig-check.c (check_signature2): Factor complaince checking out
to ...
(check_key_verify_compliance): new. Turn error into a warning in
override mode.
--
There is one important use case for this: For systems configured
globally to use de-vs mode, Ed25519 and other key types are not
allowed because they are not listred in the BSI algorithm catalog.
Now, our release signing keys happen to be Ed25519 and thus we need to
offer a way for users to check new versions even if the system is in
de-vs mode. This does on purpose not work in --batch mode so that
scripted solutions won't accidently pass a signature check.
GnuPG-bug-id: 5655
Backported-from-master: fb26e144adfd93051501d58f5d0d4f8826ddf436
* g10/free-packet.c (free_packet): Add the case for case
PKT_ENCRYPTED_AEAD.
--
GnuPG-bug-id: 5584
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(bug id fixed in this backport)
* g10/openfile.c (overwrite_filep): Use gnupg_access.
--
As said, this is just an obvious but partial fix. We need to review
things for the output module.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/exechelp-w32.c (gnupg_spawn_process): Change to use
CreateProcessW.
(gnupg_spawn_process_fd): Ditto.
(gnupg_spawn_process_detached): Ditto.
* g10/exec.c (w32_system): Ditto.
--
GnuPG-bug-id: 4398
We do not use this weirdo CREATE_UNICODE_ENVIRONMENT flag because it
does not make any sense to have non-ASCII names in the environment. I
can't imagine why this should be used at all and rationale for this
API features is, well, sparse.
(cherry picked from commit cf2f6d8a3f0594c03c383b4989a3041e9c4536d7)
* common/init.c (_init_common_subsystems) [W32]: Set the codepage to
UTF-8 for input and putput. Switch gettext to UTF-8.
* g10/gpg.c (utf8_strings) [W32]: Make sure this is always set.
--
With this patch the former patch to use ReadConsoleW and WriteConsoleW
in ttyio.c are kind of superfluous because the ANSI version of these
functions are also able to read/write UTF-8 directly given the console
code page has been set correctly. However, this seems to work only
with recent versions of Windows-10.
GnuPG-bug-id: 4365
(cherry picked from commit 8c41b8aac3efb78178fe1eaf52d8d1bbc44941a8)
Removed changes for "gpgconf --show-codepages" of the original patch.
* g10/gpg.c (_dowildcard): Remove.
(my_strusage): Enable wildcards using our new system.
--
This patch actually removes the current globing using a mingw
feature. We are not able to use this because it does not handle
Unicode filenames. The plan is to implement this in init.c. This
patch merely configures gpg to request globing.
GnuPG-bug-id: 4398
(cherry picked from commit 8e15506d6680bbee85bc01453da28fc90b4cb673)
* common/keyserver.h: Remove.
* sm/gpgsm.h (struct keyserver_spec): Remove.
(opt): Change keyserver to a strlist_t.
* sm/gpgsm.c (keyserver_list_free): Remove.
(parse_keyserver_line): Remove.
(main): Store keyserver in an strlist.
* sm/call-dirmngr.c (prepare_dirmngr): Adjust for the strlist. Avoid
an ambiguity in dirmngr by adding a prefix if needed.
* g10/options.h (struct keyserver_spec): Move definition from
keyserver.h to here. Remove most fields.
* g10/keyserver.c (free_keyserver_spec): Adjust.
(cmp_keyserver_spec): Adjust.
(parse_keyserver_uri): Simplify.
(keyidlist): Remove fakev3 arg which does not make any sense because
we don't even support v3 keys.
--
We now rely on the dirmngr to parse the keyserver specs. Thus a bad
specification will not be caught immediately. However, even before
that dirmngr had stricter tests.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (GETPASSWORD_FLAG_SYMDECRYPT): New.
(passphrase_to_dek_ext): Remove this obsolete prototype.
* g10/passphrase.c (passphrase_get): Add arg flags. Use new flag
value.
(passphrase_to_dek): Add arg flags and pass it on.
* g10/mainproc.c (proc_symkey_enc): Use new flag.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Factor extraction
part out to ...
(extract_secret_x): new. Allow for x-only coordinate.
(pk_ecdh_encrypt_with_shared_point): Change arg shared_mpi
to (shared,nshared). Move param check to the top. Add extra safety
check.
(pk_ecdh_decrypt): Adjust for change.
* g10/pkglue.c (get_data_from_sexp): New.
(pk_encrypt): Use it for "s" and adjusted for changed
pk_ecdh_encrypt_with_shared_point.
* g10/pubkey-enc.c (get_it): Remove conversion to an MPI and call
pk_ecdh_decrypt with the frame buffer.
--
Backported-from-master: f129b0e97730b47d62482fba9599db39b526f3d2)
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_import_name): Rename to ...
(keyserver_import_mbox): this. And use mail search mode.
* g10/getkey.c (get_pubkey_byname): Change the two callers.
--
In contrast to a search via keyserver_import_ntds the older
keyserver_import_name used a full match of the provided name despite
that it is only called with an addr-spec (mbox). Due to the mode the
pattern send to dirmngr was prefixed with a '=' and thus dirmngr used
an exact search;. This did only work for provided user ids like
"foo@example.org" but not for "<foo@example.org>" or
"Foo <foo@xample.org>". The old code dates back to 2010.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 4fcfac6feb2a6c2b14883ba406afc917e8d4be42)
* g10/getkey.c (get_pubkey_with_ldap_fallback): New.
* g10/trustdb.c (verify_own_keys): Use it.
(cherry picked from commit 100037ac0f558e8959fc065d4703c85c2962489e)
* agent/command.c (cmd_readkey): Add option --no-data and special
handling for $SIGNKEYID and $AUTHKEYID.
* g10/call-agent.c (agent_scd_getattr): Create shadow keys for KEY-FPR
output.
* g10/skclist.c (enum_secret_keys): Automagically get a missing public
key for the current card.
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 50293ec2ebf2a997dbad9a47166d694efcc0709a)
* g10/keyserver.c (keyserver_import_fprint_ntds): New.
* g10/getkey.c (get_pubkey_byname): Detect an attempt to search by
fingerprint in no_local mode.
--
See the man page. For testing use
gpg --auto-key-locate local,wkd,keyserver --locate-external-key \
FINGERPRINT
with at least one LDAP keyserver given in dirmngr.conf. On Windows
"ntds" may be used instead or in addtion to "keyserver".
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit ec36eca08cdbf6653e7362e8e0e6c5f2c75b4a60)
* g10/getkey.c (get_seckey_default_or_card): Lookup a missing public
key from the current card via LDAP.
* g10/call-dirmngr.c: Include keyserver-intetnal.h.
(gpg_dirmngr_ks_get): Rename arg quick into flags. Take care of the
new LDAP flag.
* g10/keyserver-internal.h (KEYSERVER_IMPORT_FLAG_QUICK): New.
Replace the use of the value 1 for the former quick arg.
(KEYSERVER_IMPORT_FLAG_LDAP): New.
* g10/keyserver.c (keyserver_get_chunk): Increase the reserved line
length.
* dirmngr/ks-action.c (ks_action_get): Add arg ldap_only.
* dirmngr/server.c (cmd_ks_get): Add option --ldap.
--
This change makes it easy to start working with gnupg: Just insert the
smartcard or token provided to you and the first time you sign a
message the public key associated with the current card will be
imported and everything is set without any configuration.
This works only with an LDAP directory because it can be expected that
the public key has been put into the LDAP during card personalization.
Of course an LDAP server needs to be configured; in a Windows AD
domain this can be a mere "keyserver ldap:///" in dirmngr.conf. Other
configured keyservers are ignored.
Requirements for the card driver: The $SIGNKEYID attribute must exists
and a query for the KEY-FPR attribute needs to return the OpenPGP
fingerprint for that key. This is currently supported for OpenPGP
cards and certain PKCS#15 cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit d7e707170fbe2956deb3d81e2802d21352079722)
* common/openpgp-oid.c (openpgp_curve_to_oid): Add optional arg R_NBITS.
Change all callers.
--
In particular for ed25519 and cv25519 it is quite useful to have an
ability to get the required algorithm.
(cherry picked from commit 24095101a5069f15a9aea7512498ac436a76814a)
* dirmngr/ks-engine-ldap.c (ks_ldap_get): Print a SOURCE status.
* g10/options.h (opts): New field expl_import_self_sigs_only.
* g10/import.c (parse_import_options): Set it.
* g10/keyserver.c (keyserver_get_chunk): Add special options for LDAP.
--
I can be assumed that configured LDAP servers are somehow curated and
not affected by rogue key signatures as the HKP servers are. Thus we
can allow the import of key signature from LDAP keyservers by default.
GnuPG-bug-id: 5387
* g10/gpg.c (oForceSignKey,opts): New option "--force-sign-key".
(main): Set it.
* g10/options.h (opt): New flag flags.force_sign_key.
* g10/keyedit.c (sign_uids): Use new flag.
--
GnuPG-bug-id: 4584
* g10/photoid.c (get_default_photo_command): Change parameter for
xdg-open.
--
xdg-open spawns the user's preferred image viewer and then exits.
Therefore we must not remove the temp file when it exits,
otherwise by the time the actual image viewer is started the file
doesn't exist any more.
Signed-off-by: Nicolas Fella <nicolas.fella@gmx.de>
* common/compliance.c (gnupg_gcrypt_is_compliant): New.
(gnupg_rng_is_compliant): Also check library version.
* g10/mainproc.c (proc_encrypted): Use new function.
(check_sig_and_print): Ditto.
* sm/decrypt.c (gpgsm_decrypt): Ditto.
* sm/encrypt.c (gpgsm_encrypt): Ditto.
* sm/verify.c (gpgsm_verify): Ditto
--
This will eventually allow us to declare Libgcrypt 1.9 to be de-vs
compliant. GnuPG can use this information then for its own checks.
As of now GnuPG tests the version of the used library but that is a
bit cumbersome to maintain.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 90c514868ff5fcf6d39490d4874ac3a31ba9e85f)
* g10/mainproc.c (proc_symkey_enc): Do not continue with an unknown
algorithm.
--
Trying to encrypt data created with
printf "\x8c\x49\x05\x0e\x0a\x03\x01"
fails in version 2.2.19 with
gpg: packet(3) with unknown version 5
but with later versions with
gpg: encrypted with unknown algorithm 14
gpg: Ohhhh jeeee: ... this is a bug \
([...]/passphrase.c:433:passphrase_to_dek)
so we better catch this case earlier.
Reported-by: Tavis Ormandy
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (get_default_configname): Remove unused function.
(main): Provide a proper filename to gpgconf_list.
--
With the new option pasrer we used "UNKOWN" in this case. The problem
was that gpgconf --list-options chekcs that an absolute file is
provided and thus bails out if no config file is in /etc/gnupg or in
~/.gnupg/.
get_default_configname was not anymore in use because its function is
part of the new option parser.
* g10/trustdb.c (tdb_register_trusted_key): Take care of that
other constant.
--
Fixes-commit: 810ea2cc684480c6aadceb2a10dd00f3fa67f2fb
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-dirmngr.c (ks_put_inq_cb): Emit "fpr" records.
* dirmngr/ks-engine-ldap.c (extract_attributes): Add args
extract-state and schemav2. Add data for the new schema version.
remove the legacy code to handle UIDs in the "pub" line.
(ks_ldap_put): Set new attributes for NTDS use the fingerprint as CN.
Signed-off-by: Werner Koch <wk@gnupg.org>
This is a backport from 2.3
* dirmngr/ks-engine-ldap.c (extract_attributes): Do not store the
pgpSignerID.
* g10/call-dirmngr.c (ks_put_inq_cb): Do not emit sig records.
--
The pgpSignerID has no use in the LDAP and thus don't store it.
David's idea back in 2004 was
/* This bit is really for the benefit of people who
store their keys in LDAP servers. It makes it easy
to do queries for things like "all keys signed by
Isabella". */
See-commit: 3ddd4410aef928827e1c8d4fb02c1ccd3f8eaea5
I consider this dangerous because such a query is not able to validate
the signature, does not get revocation signatures, and also has no
information about the validity of the signatures. Further many keys
are spammed tehse days with faked signatures and it does not make
sense to blow up the LDAP with such garbage.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* common/argparse.c, common/argparse.h: Rewrite.
* tests/gpgscm/main.c: Switch to the new option parser.
* g10/gpg.c: Switch to the new option parser and enable a global conf
file.
* g10/gpgv.c: Ditto.
* agent/gpg-agent.c: Ditto.
* agent/preset-passphrase.c: Ditto.
* agent/protect-tool.c: Ditto.
* scd/scdaemon.c: Ditto.
* dirmngr/dirmngr.c: Ditto.
* dirmngr/dirmngr_ldap.c: Ditto
* dirmngr/dirmngr-client.c: Ditto.
* kbx/kbxutil.c: Ditto.
* tools/gpg-card.c: Ditto.
* tools/gpg-check-pattern.c: Ditto.
* tools/gpg-connect-agent.c: Ditto.
* tools/gpg-pair-tool.c: Ditto.
* tools/gpg-wks-client.c: Ditto.
* tools/gpg-wks-server.c: Ditto.
* tools/gpgconf.c: Ditto.
* tools/gpgsplit.c: Ditto.
* tools/gpgtar.c: Ditto.
* g13/g13.c: Ditto.
* g13/g13-syshelp.c: Ditto. Do not force verbose mode.
* sm/gpgsm.c: Ditto. Add option --no-options.
--
This is backport from master
commit cdbe10b762f38449b86da69076209324b0c99982
commit ba463128ce65a0f347643f7246a8e097c5be19f1
commit 3bc004decd289810bc1b6ad6fb8f47e45c770ce6
commit 2c823bd878fcdbcc4f6c34993e1d0539d9a6b237
commit 0e8f6e2aa98c212442001036fb5178cd6cd8af59
but without changing all functions names to gpgrt. Instead we use
wrapper functions which, when building against old Libgpg-error
versions, are implemented in argparse.c using code from the current
libgpg-error. This allows to keep the dependency requirement at
libgpg-error 1.27 to support older distributions. Tested builds
against 1.27 and 1.40-beta.
Note that g13-syshelp does not anymore default to --verbose because
that can now be enabled in /etc/gnupg/g13-syshelp.conf.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/divert-scd.c (divert_pksign): Add arg 'grip'. Replace OPENPGP
key reference to keygrips.
(divert_pkdecrypt): Ditto.
* agent/protect.c (parse_shadow_info): Trim spaces.
* agent/pkdecrypt.c (agent_pkdecrypt): Pass the keygrip.
* agent/pksign.c (agent_pksign_do): Ditto.
* g10/mainproc.c (print_pkenc_list): Print extra info for an invalid
id error.
* g10/sign.c (do_sign): Ditto.
--
Using the keygrip instead of the identifier works on OpenPGP cards and
thus we use that to make sure that we are working on the right card.
For other cards we better don't do that to avoid regressions. Those
other cards are also usually provided and do not allow to
self-generate the keys.
Note that old versions of the code (gpg 1.4) used the fingerprint as
additional check but that was eventually removed and now that we use
the keygrip all over the place, it is best to use this to identify a
key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (pref_hint): Change from union to struct and add field
'exact'. Adjust callers.
* g10/pkclist.c (algo_available): Take care of the exact hint.
* g10/sign.c (sign_file): Fix indentation. Rework the hash from
recipient prefs.
--
This fixes a encrypt+sign case like: One recipient key has SHA512 as
highest ranked hash preference but the the signing key is a 256 bit
curve. Because we don't want to use a truncated hash with ECDSA, we
need to have an exact match - this is in particular important for
smartcard which check that the hash matches the curves.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_fopen) [W32]: Use _wfopen if needed. Use
new function in most places where fopen is used.
--
The config files in 2.2 are still read using fopen - we need to change
this to allow Unicode directory names. There is also one case where
files are written using the old fopen. The new option parser in 2.3
does not have this problem but at some places fopen is also still used.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (reset_notify): Add option --keep-lock.
(do_reset): Add arg keep_lock.
(cmd_lock): Send progress status.
* g10/call-agent.c (agent_scd_apdu): Add more pseudo APDUs.
* g10/card-util.c (send_apdu): Ditto.
(factory_reset): Use lock commands.
--
This is required so that for example Kleopatra does not detect the
RESET and issues a SERIALNO of its own, thus conflicting with our
SERIALNO undefined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_CANCELED_BY_USER): New.
* g10/passphrase.c (passphrase_to_dek): Send STATUS_CANCELED_BY_USER
instead of STATUS_MISSING_PASSPHRASE when canceled is set.
--
This is to prevent further pinentry tries when the pinentry is canceled
by the user during symmetric decryption.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
(cherry picked from commit 31e47dfad0f40e31e8b3113b933696e8e4105136)
* g10/misc.c (print_digest_rejected_note): Do not print in quiet mode.
(print_sha1_keysig_rejected_note): Ditto.
--
GnuPG-bug-id: 4893
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit e08e1d62d089a154ec5d7c80cd58e8e3b18d2d6b)
* g10/openfile.c (try_make_homedir): Move core of the code to ...
* common/homedir.c (gnupg_maybe_make_homedir): new.
* sm/keydb.c (try_make_homedir): Implement using new function.
* common/homedir.c: Include i18n.h.
* po/POTFILES.in: Add common/homedir.c.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (set_compliance_option): For AES256 and SHA256 in de-vs
mode.
* g10/encrypt.c (setup_symkey): Add extra compliance check.
(encrypt_simple): Avoid printing a second error oncplinace failure.
--
Because we used the RFC4880 mode as base for the de-vs mode we got
3DES as symmetric encryption algorithm. With the default gnupg mode
that was already used. The new extra compliance checks are added to
detect whether a --personal-cipher-preference or --cipher-algo option
tried to override the algorithms. They are still possible but now
non-compliant algorithms will throw an error.
Manual testing can be done with commands like this:
gpg --no-options --compliance=de-vs \
--personal-cipher-preferences "S1 S7" \
--pinentry-mode loopback -v --passphrase abc -ac </etc/motd
Here the command fails due to IDEA (S1) being the preferred cipher
algorithm. Using "--s2k-digest-algo SHA1" instead of
--personal-cipher-preferences will also fail.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit d1f2a6d9f71cf50318f4891c84aeedb975553896)
* g10/misc.c (pct_expando): Catch special case of the empty string.
Also map a NULL to the empty string.
* g10/photoid.c (show_photos): Make an empty string used as command
fail.
--
This patch also fixes a segv when calling gpg wrongly like
gpg -N \-foo@example.org
GnuPG-bug-id: 5117
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (is_weak_digest): New.
(print_digest_algo_note): Use it here.
* g10/sig-check.c (check_signature_end_simple): Use it.
* g10/sign.c (hash_for): Do not use recipient_digest_algo if it is in
the least of weak digest algorithm.
--
If a message is signed and encrypted to several recipients, the to be
used digest algorithm is deduced from the preferences of the
recipient. This is so that all recipients are able to check the the
signature. However, if the sender has a declared an algorithm as
week, that algorithm shall not be used - in this case we fallback to
the standard way of selecting an algorithm.
Note that a smarter way of selecting the algo is to check this while
figuring out the algorithm - this needs more testing and thus we do it
the simple way.
Reported-by: Phil Pennock
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 15746d60d492f5792e4a179ab0a08801b4049695
* common/sysutils.c (gnupg_stat): New.
* common/sysutils.h: Include sys/stat.h.
--
Yet another wrapper for Unicode support on Windows.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 18e5dd7b03ced51611c9ba1345cf498a0aaf14a6)
* common/sysutils.c (any8bitchar) [W32]: New.
(gnupg_open): New. Replace most calls to open by this.
* common/iobuf.c (any8bitchar) [W32]: New.
(direct_open) [W32]: Use CreateFileW if needed.
--
This is yet another step for full Unicode support on Windows.
GnuPG-bug-id: 5098
(cherry picked from commit 4dcef0e17836e8725c31a3b76f2bf7144345c808)
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 390497ea115e1aca93feec297a5bd6ae7b1ba6dd
* common/sysutils.c (gnupg_access): New. Replace all calls to access
by this wrapper.
* common/homedir.c (w32_shgetfolderpath): Change to return UTF-8
directory name.
(standard_homedir): Adjust for change.
(w32_commondir, gnupg_cachedir): Ditto.
--
Also use SHGetFolderPathW instead of SHGetFolderPathA on Windows.
This is required to correctly handle non-ascii filenames on Windows.
GnuPG-bug-id: 5098
(cherry picked from commit c94ee1386e0d5cdac51086c4d5b92de59c09c9b5)
* g10/keygen.c (read_parameter_file): Initialize nline.
* g10/textfilter.c (copy_clearsig_text): Initialize bufsize.
--
In iobuf_read_line the parameter to pass and return the current buffer
length is controlled by the buffer parameter. Thus there should be no
problem because the assert call check s buffer first. For yet unknown
reasons when using the standard GNU libc assert valgrind complains
about an uninitialized variable. That does not happen with our
log_assert. Tested with gcc 8.3.0 and valgrind 3.14.0.
* g10/getkey.c (fixup_uidnode): Increase size of prefs array.
--
GnuPG-bug-id: 5050
Fixes-commit: ab7a0b07024c432233e691b5e4be7e32baf8d80f
which introduced a feature to show the AEAD preferences of keys
created with rfc4880bis capable software (e.g. GnuPG 2.3-beta).
The same code in 2.3 is correct, though.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (DEFAULT_STD_KEY_PARAM): Change.
(gen_rsa): Set fallback to 3072.
(get_keysize_range): Set default to 3072.
* doc/examples/vsnfd.prf: No more need for default-new-key-algo.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/call-agent.c (gpgsm_agent_genkey): Pass --timestamp option.
(gpgsm_agent_import_key): Ditto.
* g10/call-agent.c (agent_genkey): Add arg timestamp and pass it on.
(agent_import_key): Ditto.
* g10/import.c (transfer_secret_keys): Pass the creation date to the
agent.
* g10/keygen.c (common_gen): Ditto.
--
Having the creation time in the private key file makes it a lot easier
to re-create an OpenPGP public keyblock in case it was accidentally
lost.
Signed-off-by: Werner Koch <wk@gnupg.org>
Cherry-picked-from-master: 4031c42bfd0135874a5b362df175de93a19f1b51
* g10/export.c (export_ssh_key): Do not close stdout.
--
stdout should never be closed; this fixes this minor bug.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
It is a bit surprising that nothing happens if no key is specified to
--delete-key et al. Although this is common Unix behaviour the use
might have expected that it behaves like --export and deletes all
keys. Sure we don't do the latter, so a short notice will help.
GnuPG-bug-id: 4959
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/genkey.c (agent_ask_new_passphrase): No qualitybar.
* g10/call-agent.c (agent_get_passphrase): Ditto.
* sm/call-agent.c (gpgsm_agent_ask_passphrase): Ditto.
--
The concept of a passphrase quality indicator is anyway questionable
because user are smart enough to trick them out and they also tend to
limit the actually used entropy.
Except for the red/green switching (to show whether constraints are
fulfilled) our qualitybar is pretty bad and thus worse than none.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/encrypt.c (setup_symkey): Use default_cipher_algo function
instead of the fallback s2k_cipher_algo. Fix error code.
(encrypt_simple): Use setup_symkey.
--
Aside of removing code duplication this patch fixes the flaw that the
S2K cipher algorithm was used when mixing public key and symmetric
encryption or signatures with symmetric encrypion. The
default_algorithm function should be used here so that the command
line option --cipher-algo and --personal-cipher-preferences have an
effect.
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 6864bba78e76a1ff72aec140ae9f4e752454c463
* common/compliance.h (PK_ALGO_FLAG_RSAPSS): New.
* common/compliance.c (gnupg_pk_is_compliant): Add arg alog_flags and
test rsaPSS. Adjust all callers.
* common/util.c (pubkey_algo_to_string): New.
(gnupg_pk_is_allowed): Ditto.
* sm/misc.c (gpgsm_ksba_cms_get_sig_val): New wrapper function.
(gpgsm_get_hash_algo_from_sigval): New.
* sm/certcheck.c (gpgsm_check_cms_signature): Change type of sigval
arg. Add arg pkalgoflags. Use the PK_ALGO_FLAG_RSAPSS.
* sm/verify.c (gpgsm_verify): Use the new wrapper and new fucntion to
also get the algo flags. Pass algo flags along. Change some of the
info output to be more like current master.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
This backport from master
commit 969abcf40cdfc65f3ee859c5e62889e1a8ccde91
also includes some changes taken from
commit a759fa963a42e0652134130029217270b6d5d00b
(sm: Improve readability of the data verification output.)
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/logging.c (log_printhex): Chnage order of args. Make it
printf alike. Change all callers.
* configure.ac: Add -Wno-format-zero-length
--
This makes it consistent with modern libgpgrt logging and thus eases
back porting from newer GnuPG versions which use libgpgrt logging.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Add it.
--
This got lost when backporting from master.
Fixes-commit: 95b42278cafe7520d87168fb993ba715699e6bb6
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (decrypt_data): Move aead algo detection up.
--
Note that the AEAD modes are not yet approved for --compliance=de-vs
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (preftype_t): Add PREFTYPE_AEAD.
* g10/keyedit.c (show_prefs): Print AEAD preferences.
* g10/getkey.c (fixup_uidnode): Set AEAD flags.
(merge_selfsigs): Ditto.
--
Although we are not able to create such keys we should be abale to
show them.
Signed-off-by: Werner Koch <wk@gnupg.org>
