* g10/main.h: Add rejection_shown flag to each weakhash struct
* g10/misc.c (print_digest_algo_note, additional_weak_digest): Do not
treat MD5 separately; (print_digest_rejected_note): Use
weakhash.rejection_shown instead of static shown.
* g10/options.h (opt): Change from additional_weak_digests to
weak_digests.
* g10/sig-check.c: Do not treat MD5 separately.
* g10/gpg.c (main): Explicitly set MD5 as weak.
* g10/gpgv.c (main): Explicitly set MD5 as weak.
--
Previously, only one weak digest rejection message was shown, of
whichever was the first type encountered. This meant that if "gpg
--weak-digest SHA224" encountered both an MD5 digest and a SHA224
digest, it would only show the user that the MD5 digest was rejected.
In order to let the user know which algorithms were rejected, we
needed to move the "shown" flag into a per-weak-algorithm location.
Given this additional complication, it made no sense to continue to
treat MD5 specially, so it is added as a default weak algorithm in the
same opt.weak_digests data structure as any other.
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/options.h: Add additional_weak_digests linked list to opts.
* g10/main.h: Declare weakhash linked list struct and
additional_weak_digest() function to insert newly-declared weak
digests into opts.
* g10/misc.c: (additional_weak_digest): New function.
(print_digest_algo_note): Check for deprecated digests; use proper
gcry_md_algos type.
* g10/sig-check.c: (do_check): Reject weak digests in addition to MD5.
* g10/gpg.c: Add --weak-digest option to gpg.
* doc/gpg.texi: Document gpg --weak-digest option.
* g10/gpgv.c: Add --weak-digest option to gpgv.
* doc/gpgv.texi: Document gpgv --weak-digest option.
--
gpg and gpgv treat signatures made over MD5 as unreliable, unless the
user supplies --allow-weak-digests to gpg. Signatures over any other
digest are considered acceptable.
Despite SHA-1 being a mandatory-to-implement digest algorithm in RFC
4880, the collision-resistance of SHA-1 is weaker than anyone would
like it to be.
Some operators of high-value targets that depend on OpenPGP signatures
may wish to require their signers to use a stronger digest algorithm
than SHA1, even if the OpenPGP ecosystem at large cannot deprecate
SHA1 entirely today.
This changeset adds a new "--weak-digest DIGEST" option for both gpg
and gpgv, which makes it straightforward for anyone to treat any
signature or certification made over the specified digest as
unreliable.
This option can be supplied multiple times if the operator wishes to
deprecate multiple digest algorithms, and will be ignored completely
if the operator supplies --allow-weak-digests (as before).
MD5 is still always considered weak, regardless of any further
--weak-digest options supplied.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Capitialized some comments, shorted a line in do_check, and changed
subject to name the option. -wk
* configure.ac: Check for sqlite3.
(SQLITE3_CFLAGS): AC_SUBST it.
(SQLITE3_LIBS): Likewise.
* g10/Makefile.am (AM_CFLAGS): Add $(SQLITE3_CFLAGS).
(gpg2_SOURCES): Add tofu.h and tofu.c.
(gpg2_LDADD): Add $(SQLITE3_LIBS).
* g10/tofu.c: New file.
* g10/tofu.h: New file.
* g10/options.h (trust_model): Define TM_TOFU and TM_TOFU_PGP.
(tofu_db_format): Define.
* g10/packet.h (PKT_signature): Add fields digest and digest_len.
* g10/gpg.c: Include "tofu.h".
(cmd_and_opt_values): Declare aTOFUPolicy, oTOFUDefaultPolicy,
oTOFUDBFormat.
(opts): Add them.
(parse_trust_model): Recognize the tofu and tofu+pgp trust models.
(parse_tofu_policy): New function.
(parse_tofu_db_format): New function.
(main): Initialize opt.tofu_default_policy and opt.tofu_db_format.
Handle aTOFUPolicy, oTOFUDefaultPolicy and oTOFUDBFormat.
* g10/mainproc.c (do_check_sig): If the signature is good, copy the
hash to SIG->DIGEST and set SIG->DIGEST_LEN appropriately.
* g10/trustdb.h (get_validity): Add arguments sig and may_ask. Update
callers.
(tdb_get_validity_core): Add arguments sig and may_ask. Update
callers.
* g10/trust.c (get_validity) Add arguments sig and may_ask. Pass them
to tdb_get_validity_core.
* g10/trustdb.c: Include "tofu.h".
(trust_model_string): Handle TM_TOFU and TM_TOFU_PGP.
(tdb_get_validity_core): Add arguments sig and may_ask. If
OPT.TRUST_MODEL is TM_TOFU or TM_TOFU_PGP, compute the TOFU trust
level. Combine it with the computed PGP trust level, if appropriate.
* g10/keyedit.c: Include "tofu.h".
(show_key_with_all_names_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/keylist.c: Include "tofu.h".
(public_key_list): Also show the PGP stats if the trust model is
TM_TOFU_PGP.
(list_keyblock_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/pkclist.c: Include "tofu.h".
* g10/gpgv.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* g10/test-stubs.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* doc/DETAILS: Describe the TOFU Policy field.
* doc/gpg.texi: Document --tofu-set-policy, --trust-model=tofu,
--trust-model=tofu+pgp, --tofu-default-policy and --tofu-db-format.
* tests/openpgp/Makefile.am (TESTS): Add tofu.test.
(TEST_FILES): Add tofu-keys.asc, tofu-keys-secret.asc,
tofu-2183839A-1.txt, tofu-BC15C85A-1.txt and tofu-EE37CF96-1.txt.
(CLEANFILES): Add tofu.db.
(clean-local): Add tofu.d.
* tests/openpgp/tofu.test: New file.
* tests/openpgp/tofu-2183839A-1.txt: New file.
* tests/openpgp/tofu-BC15C85A-1.txt: New file.
* tests/openpgp/tofu-EE37CF96-1.txt: New file.
* tests/openpgp/tofu-keys.asc: New file.
* tests/openpgp/tofu-keys-secret.asc: New file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/options.h (opt): Add field "print_dane_records".
* g10/gpg.c (oPrintDANERecords): new.
(opts): Add --print-dane-records.
(main): Set that option.
* g10/export.c (do_export): Remove EXPORT_DANE_FORMAT handling.
(do_export_stream): Add EXPORT_DANE_FORMAT handling.
* g10/keylist.c (list_keyblock_pka): Implement DANE record printing.
* g10/gpgv.c (export_pubkey_buffer): New stub.
* g10/test-stubs.c (export_pubkey_buffer): New stub.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Remove --no-sig-create-check.
* g10/options.h (struct opt): Remove field no_sig_create_check.
* g10/sign.c (do_sign): Always check unless it is RSA and we are using
Libgcrypt 1.7.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (KEYSERVER_HTTP_PROXY): New.
(KEYSERVER_USE_TEMP_FILES, KEYSERVER_KEEP_TEMP_FILES): Remove.
(KEYSERVER_TIMEOUT): New.
* common/keyserver.h (KEYSERVER_TIMEOUT): Remove.
* g10/keyserver.c (keyserver_opts): Remove obsolete "use-temp-files"
and "keep-temp-files". Add "http-proxy" and "timeout".
(parse_keyserver_options): Remove 1.2 compatibility option
"honor-http_proxy". Remove "use-temp-files" and "keep-temp-files"
code.
--
Note that many of these options where implicitly used by passing any
unknown option down to the former keyserver helpers. The don't exist
anymore thus we need to make them explicit. Another patch will convey
them to dirmngr. Temp files are not anymore used thus they can be
removed and will be ignored when used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (DBG_LOOKUP_VALUE): Change to 8192.
* g10/options.h (DBG_LOOKUP_VALUE, DBG_LOOKUP): New.
* g10/getkey.c: Use DBG_LOOKUP instead of DBG_CACHE at most places.
* g10/gpg.c (main): Add command --print-pka-records.
* g10/options.h (struct opt): Add field "print_pka_records".
* g10/keylist.c (list_keyblock_pka): New.
(list_keyblock): Call it if new option is set.
(print_fingerprint): Add mode 10.
--
This is a fist step towards a slightly updated PKA implementation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Remove keyserver_options.other.
* g10/gpg.c (main): Obsolete option --honor-http-proxt.
* g10/keyserver.c (add_canonical_option): Replace by ...
(warn_kshelper_option): New.
(parse_keyserver_uri): Obsolete "x-broken-http".
--
Some of these options are deprecated for 10 years and they do not make
any sense without the keyserver helpers. For one we print a hint on
how to replace it:
gpg: keyserver option 'ca-cert-file' is obsolete; \
please use 'hkp-cacert' in dirmngr.conf
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/armor.c (parse_hash_header,carmor_filter): Ignore MD5 in hash
header.
(fake_packet): Remove pgp-2 workaround for white space stripping.
* g10/filter.h (armor_filter_context_t): Remove field pgp2mode.
* g10/options.h (opt): Remove field pgp2_workarounds.
* g10/gpg.c (main): Do not set this field.
* g10/gpgv.c (main): Ditto.
* g10/mainproc.c (proc_encrypted): Use SHA-1 as fallback s2k hash
algo. Using MD5 here is useless.
(proc_plaintext): Remove PGP-2 related woraround
(proc_tree): Remove another workaround but keep the one for PGP-5.
--
The removed code was either not anymore used or its use would have
caused an error message later anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_KEEP_OWNERTTRUST): New.
* g10/import.c (parse_import_options): Add "keep-ownertrust".
(import_one): Act upon new option.
--
This option is in particular useful to convert from a pubring.gpg to
the new pubring.kbx in GnuPG 2.1 or vice versa:
gpg1 --export | gpg2 --import-options keep-ownertrust --import
* g10/build-packet.c (do_key): Remove support for building v3 keys.
* g10/parse-packet.c (read_protected_v3_mpi): Remove.
(parse_key): Remove support for v3-keys. Add dedicated warnings for
v3-key packets.
* g10/keyid.c (hash_public_key): Remove v3-key support.
(keyid_from_pk): Ditto.
(fingerprint_from_pk): Ditto.
* g10/options.h (opt): Remove fields force_v3_sigs and force_v4_certs.
* g10/gpg.c (cmd_and_opt_values): Remove oForceV3Sigs, oNoForceV3Sigs,
oForceV4Certs, oNoForceV4Certs.
(opts): Turn --force-v3-sigs, --no-force-v3-sigs, --force-v4-certs,
--no-force-v4-certs int dummy options.
(main): Remove setting of the force_v3_sigs force_v4_certs flags.
* g10/revoke.c (gen_revoke, create_revocation): Always create v4 certs.
* g10/sign.c (hash_uid): Remove support for v3-signatures
(hash_sigversion_to_magic): Ditto.
(only_old_style): Remove this v3-key function.
(write_signature_packets): Remove support for creating v3-signatures.
(sign_file): Ditto.
(sign_symencrypt_file): Ditto.
(clearsign_file): Ditto. Remove code to emit no Hash armor line if
only v3-keys are used.
(make_keysig_packet): Remove arg SIGVERSION and force using
v4-signatures. Change all callers to not pass a value for this arg.
Remove all v3-key related code.
(update_keysig_packet): Remove v3-signature support.
* g10/keyedit.c (sign_uids): Always create v4-signatures.
* g10/textfilter.c (copy_clearsig_text): Remove arg pgp2mode and
change caller.
--
v3 keys are deprecated for about 15 years and due the severe
weaknesses of MD5 it does not make any sense to keep code around to
use these old and broken keys. Users who need to decrypt old messages
should use gpg 1.4 and best re-encrypt them to modern standards.
verification of old (i.e. PGP2) created signatures is thus also not
anymore possible but such signatures have no values anyway - MD5 is
just too broken.
We have also kept support for v3 signatures until now. With the
removal of support for v3 keys it is questionable whether it makes any
sense to keep support for v3-signatures. What we do now is to keep
support for verification of v3-signatures but we force the use of
v4-signatures. The latter makes the --pgp6 and --pgp7 switch a bit
obsolete because those PGP versions require v3-signatures for
messages. These versions of PGP are also really old and not anymore
maintained so they have not received any bug fixes and should not be
used anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Added --enable-large-secmem option.
* g10/options.h: Add opt.flags.large_rsa.
* g10/gpg.c: Contingent on configure option: adjust secmem size,
add gpg --enable-large-rsa, bound to opt.flags.large_rsa.
* g10/keygen.c: Adjust max RSA size based on opt.flags.large_rsa
* doc/gpg.texi: Document --enable-large-rsa.
--
This is a cherry-pick of 534e2876ac from
STABLE-BRANCH-1-4 against master
Some older implementations built and used RSA keys up to 16Kib, but
the larger secret keys now fail when used by more recent GnuPG, due to
secure memory limitations.
Building with ./configure --enable-large-secmem will make gpg
capable of working with those secret keys, as well as permitting the
use of a new gpg option --enable-large-rsa, which let gpg generate RSA
keys up to 8Kib when used with --batch --gen-key.
Debian-bug-id: 739424
Minor edits by wk.
GnuPG-bug-id: 1732
* g10/gpg.c (oRFC1991, oPGP2): Remove
(opts): Remove --pgp2 and --rfc1991.
* g10/options.h (CO_PGP2, CO_RFC1991): Remove. Remove all users.
(RFC2440, PGP2): Remove. Remove all code only enabled by these
conditions.
* tests/openpgp/clearsig.test: Remove --rfc1991 test.
--
The use of PGP 2.c is considered insecure for quite some time
now (e.g. due to the use of MD5). Thus we remove all support for
_creating_ PGP 2 compatible messages.
* g10/gpg.c (oCompressKeys, oCompressSigs): Remove.
(opts): Turn --compress-keys and --compress-signs in NOPs.
* g10/options.h (opt): Remove fields compress_keys and compress_sigs.
* g10/export.c (do_export): Remove compress_keys feature.
* g10/sign.c (sign_file): Remove compress_sigs feature.
--
These features are disabled in GnuPG since the very early days and
they fulfill no real purpose. For now we keep the command line
options as dummys.
* g10/gpg.c: Add option --with-secret.
* g10/options.h (struct opt): Add field with_secret.
* g10/keylist.c (public_key_list): Pass opt.with_secret to list_all
and list_one.
(list_all, list_one): Add arg mark_secret.
(list_keyblock_colon): Add arg has_secret.
* sm/gpgsm.c: Add option --with-secret.
* sm/server.c (option_handler): Add option "with-secret".
* sm/gpgsm.h (server_control_s): Add field with_secret.
* sm/keylist.c (list_cert_colon): Take care of with_secret. Also move
the token string from the wrong field 14 to 15.
--
This option is useful for key managers which need to know whether a
key has a secret key. This change allows to collect this information
in one pass.
* g10/options.h (IMPORT_NO_SECKEY): New.
* g10/keyserver.c (keyserver_spawn, keyserver_import_cert): Set new
flag.
* g10/import.c (import_secret_one): Deny import if flag is set.
--
By modifying a keyserver or a DNS record to send a secret key, an
attacker could trick a user into signing using a different key and
user id. The trust model should protect against such rogue keys but
we better make sure that secret keys are never received from remote
sources.
Suggested-by: Stefan Tomanek
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit e7abed3448)
Resolved conflicts:
g10/import.c
g10/keyserver.c
* g10/gpg.c (oLegacyListMode, opts, main): Add --legacy-list-mode.
* g10/options.h (struct opt): Add field legacy_list_mode.
* g10/keydb.h (PUBKEY_STRING_SIZE): New.
* g10/keyid.c (pubkey_string): New.
* g10/import.c (import_one, import_secret_one): Use pubkey_string.
* g10/keylist.c (print_seckey_info): Ditto.
(print_pubkey_info, print_card_key_info): Ditto.
(list_keyblock_print): Ditto.
* g10/mainproc.c (list_node): Ditto.
* g10/pkclist.c (do_edit_ownertrust, build_pk_list): Ditto.
* g10/keyedit.c (show_key_with_all_names): Ditto. Also change the
format.
(show_basic_key_info): Ditto.
* common/openpgp-oid.c (openpgp_curve_to_oid): Also allow "ed25519".
(openpgp_oid_to_curve): Downcase "ed25519"
--
For ECC it seems to be better to show the name of the curve and not
just the size of the prime field. The curve name does not anymore fit
into the "<size><letter>" descriptor (e.g. "2048R") and a fixed length
format does not work either. Thus the new format uses
"rsa2048" - RSA with 2048 bit
"elg1024" - Elgamal with 1024 bit
"ed25519" - ECC using the curve Ed25519.
"E_1.2.3.4" - ECC using the unsupported curve with OID "1.2.3.4".
unless --legacy-list-mode is given. In does not anymore line up
nicely in columns thus I expect further changes to this new format.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Rename field no_version to emit_version.
* g10/gpg.c (main): Init opt.emit_vesion to 1. Change --emit-version
to bump up opt.emit_version.
* g10/armor.c (armor_filter): Implement different --emit-version
values.
--
GnuPG-bug-id: 1572
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Include shareddefs.h.
(main): Add option --pinentry-mode.
* g10/options.h (struct opt): Add field pinentry_mode.
* g10/passphrase.c: Include shareddefs.h.
(have_static_passphrase): Take care of loopback pinentry_mode.
(read_passphrase_from_fd): Ditto.
(get_static_passphrase): New.
(passphrase_to_dek_ext): Factor some code out to ...
(emit_status_need_passphrase): new.
* g10/call-agent.c (start_agent): Send the pinentry mode.
(default_inq_cb): Take care of the PASSPHRASE inquiry. Return a
proper error code.
(agent_pksign): Add args keyid, mainkeyid and pubkey_algo.
(agent_pkdecrypt): Ditto.
* g10/pubkey-enc.c (get_it): Pass new args.
* g10/sign.c (do_sign): Pass new args.
* g10/call-agent.c (struct default_inq_parm_s): New. Change all
similar structs to reference this one. Change all users and inquire
callback to use this struct, instead of NULL or some undefined but not
used structs. This change will help to eventually get rid of global
variables.
--
This new features allows to use gpg without a Pinentry. As a
prerequisite the agent must be configured to allow the loopback
pinentry mode (option --allow-loopback-pinentry). For example
gpg2 --pinentry-mode=loopback FILE.gpg
may be used to decrypt FILE.gpg while entering the passphrase on the
tty. If batch is used, --passphrase et al. may be used, if
--command-fd is used, the passphrase may be provided by another
process. Note that there are no try-again prompts in case of a bad
passphrase.
* common/logging.c (log_clock): New.
* g10/gpg.c (set_debug): Print clock debug flag.
* g10/options.h (DBG_CLOCK_VALUE, DBG_CLOCK): New.
--
To actually use log_clock you need to enable the code in
logginc.c:log_check() and link against librt. --debug 4096 may then
be used to enable it at runtime.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
* seskey.c (encode_session_key): Debug output of the session key.
* pubkey-enc.c (get_it): Handle card case.
* call-agent.c (agent_scd_pkdecrypt): New.
* pkglue.c (pk_encrypt): Add RSA support.
* g10.c (main): Default to --use-agent.
* keygen.c (show_smartcard): Print info about the public key.
(check_smartcard): Check for existing key here.
(gen_card_key): And not anymore here.
(fpr_is_zero): New.
(generate_keypair): Generate both keys for a card.
(smartcard_change_url): Nw.
* misc.c (checksum_u16_nobug): Removed.
(checksum_u16): Removed the bug emulation.
(checksum_mpi): Ditto.
(checksum_mpi_counted_nbits): Removed and replaced all calls
with checksum_mpi.
* parse-packet.c (read_protected_v3_mpi): New.
(parse_key): Use it here to store it as an opaque MPI.
* seckey-cert.c (do_check): Changed the v3 unprotection to the new
why to store these keys.
(protect_secret_key): Likewise.
* build-packet.c (do_secret_key): And changed the writing.
decryption failed error if a MDC does not verify. Warn if a MDC is not
present (can disable via --no-mdc-warning).
* exec.c (exec_write), g10.c (main), keyserver.c (keyserver_spawn): Use
new DISABLE_KEYSERVER_PATH rather than FIXED_EXEC_PATH.
keyserver.c (keyserver_spawn): If the user does not use "exec-path",
completely replace $PATH with GNUPG_LIBEXECDIR before calling the
keyserver helper. If the user does use "exec-path", append
GNUPG_LIBEXECDIR after the specified path.
delete_inv_parts), keyserver.c (parse_keyserver_options): add new
--import-options option. The only current flag is "allow-local-sigs".
* g10.c (main): Don't disable MDC in pgp7 mode.
* options.h, g10.c (main), keyserver.c (parse_keyserver_options): Remove
old keyserver-option include-attributes now that there is an export-option
for the same thing.
g10.c (main): add new --export-options option. Current flags are
"include-non-rfc", "include-local-sigs", "include-attributes", and
"include-sensitive-revkeys".
* options.h, hkp.c (hkp_export), keyserver.c (parse_keyserver_options,
keyserver_spawn): try passing unknown keyserver options to export options,
and if successful, use them when doing a keyserver --send-key.
* build-packet.c (build_sig_subpkt): We do not generate
SIGSUBPKT_PRIV_VERIFY_CACHE anymore.
designated revoker means "sensitive", not "local". It's exportable under
the right circumstances.
* main.h, options.h, export.c (do_export_stream), g10.c (main), hkp.c
(hkp_export), keyserver.c (keyserver_spawn: Add a flag to skip attribute
packets and their signatures while exporting. This is to accomodate
keyservers (pksd again) that choke on attributes. Use keyserver-option
"include-attributes" to control it. This defaults to ON (i.e. don't
skip).
keyserver_work), hkp.c (hkp_ask_import, hkp_export, hkp_search): Use a
much more strict reading of RFC-2396 for the keyserver URIs. Specifically,
don't try and be smart about checking the value of ":port" so long as it
is all digits, and properly handle opaque data (those scheme specific
parts that do not start with "//").
use the original keyserver URI for cosmetics rather than trying to
recreate it when needed.
* mainproc.c (check_sig_and_print): Properly disregard expired uids.
Make sure that the first uid listed is a real uid and not an attribute
(attributes should only be listed in the "aka" section). When there are
no valid textual userids, try for an invalid textual userid before using
any attribute uid.
