* g10/gpg.c (oPrintPKARecords): Remove.
(opts): Remove --print-pka-records.
(main): Remove "pka-lookups","pka-trust-increase" and other PKA stuff.
* g10/options.h (EXPORT_DANE_FORMAT): Remove.
(VERIFY_PKA_LOOKUPS, VERIFY_PKA_TRUST_INCREASE): Remove.
(KEYSERVER_HONOR_PKA_RECORD): Remove.
* g10/packet.h (pka_info_t): Remove.
(PKT_signature): Remove flags.pka_tried and pka_info.
* g10/parse-packet.c (register_known_notation): Remove
"pka-address@gnupg.org".
* g10/pkclist.c (check_signatures_trust): Remove PKA stuff.
* g10/call-dirmngr.c (gpg_dirmngr_get_pka): Remove.
* g10/export.c (parse_export_options): Remove "export-pka".
(do_export): Adjust for this.
(write_keyblock_to_output): Ditto.
(do_export_stream): Ditto.
(print_pka_or_dane_records): Rename to ...
(print_dane_records): this and remove two args. Remove PKA printing.
* g10/free-packet.c (free_seckey_enc, cp_pka_info): Adjust for removed
pka_info field.
* g10/getkey.c (get_pubkey_byname): Make AKL_PKA a dummy.
* g10/keyserver.c: Remove "honor-pka-record".
(keyserver_import_pka): Remove.
* g10/mainproc.c (get_pka_address): Remove.
(pka_uri_from_sig): Remove.
(check_sig_and_print): Remove code for PKA.
--
PKA (Public Key Association) was a DNS based key discovery method
which looked up fingerprint by mail addresses in the DNS. This goes
back to the conference where DKIM was suggested to show that we
already had a better method for this available with PGP/MIME. PKA was
was later superseded by an experimental DANE method and is today not
anymore relevant. It is anyway doubtful whether PKA was ever widely
used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (pref_hint): Change from union to struct and add field
'exact'. Adjust callers.
* g10/pkclist.c (algo_available): Take care of the exact hint.
* g10/sign.c (sign_file): Rework the hash detection from
recipient prefs.
--
This fixes a encrypt+sign case like: One recipient key has SHA512 as
highest ranked hash preference but the the signing key is a 256 bit
curve. Because we don't want to use a truncated hash with ECDSA, we
need to have an exact match - this is in particular important for
smartcard which check that the hash matches the curves.
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported-from-stable: aeed0b93ff
* g10/pkclist.c (write_trust_status): Add arg mbox.
(check_signatures_trust): Appenmd mbox to the status lines.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (check_sig_and_print): Add failsafe check for PK.
Pass KEYBLOCK down do check_signatures_trust. Protect existsing error
ocde in case the signature expired.
* g10/pkclist.c (is_in_sender_list): New.
(check_signatures_trust): Add args keyblock and pk. Add new uid based
checking code.
* g10/test-stubs.c, g10/gpgv.c: Adjust stubs.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (read_key_from_file): Rename to ...
(read_key_from_file_or_buffer): this and add new parameters. Adjust
callers.
(import_included_key_block): New.
* g10/packet.h (PKT_signature): Add field flags.key_block.
* g10/parse-packet.c (parse_signature): Set that flags.
* g10/sig-check.c (check_signature2): Add parm forced_pk and change
all callers.
* g10/mainproc.c (do_check_sig): Ditto.
(check_sig_and_print): Try the included key block if no key is
available.
--
This is is the second part to support the new Key Block subpacket.
The idea is that after having received a signed mail, it is instantly
possible to reply encrypted - without the need for any centralized
infrastructure.
There is one case where this does not work: A signed mail is received
using a specified signer ID (e.g. using gpg --sender option) and the
key block with only that user ID is thus imported. The next time a
mail is received using the same key but with a different user ID; the
signatures checks out using the key imported the last time. However,
the new user id is not imported. Now when trying to reply to that
last mail, no key will be found. We need to see whether we can update
a key in such a case.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/expand-group.c (expand_group): Add arg prepend_input.
* g10/pkclist.c (build_pk_list): Adjust for it.
* g10/getkey.c (key_byname): Keep the expanded names in the CTX and
don't premature free them.
(get_pubkey_byname): Append the namelist to the extra_list.
--
The original patch didn't kept the expanded list in the context and
also would duplicate names which are not group names. The latter does
not really harm but the former lead to a use after free. Original
patch was applied just a few weeks ago.
Fixes-commit: e825aea2ba
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/expand-group.c: New
* g10/pkclist.c: Extract expand_group and expand_id into expand-group.c.
* g10/keydb.h: Add prototypes of expand_id and expand_group.
* g10/getkey.c: Use expand_group before resolving key references.
* g10/Makefile.am: Compile expand-group.c.
--
When searching a key by its name, try to expand the provided name in
case it is a GPG group reference. This GPG group resolution is performed
before the individual keys are verified.
This allows key listing using a GPG group reference. In particular, this
modification fixes the encryption to group support in KDE's Kmail which
is broken since version 18.04.
Signed-off-by: Stephan Mueller <stephan.mueller@atsec.com>
- Changed new filename to use a dash instead of an underscore.
- Indendation changes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (enum_sig_subpkt): Replace first arg by two args
so that the entire signature packet is available. Change all callers.
(parse_sig_subpkt): Ditto.
--
This patch is a prerequisite to support the new attestation key
signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aLocateExtKeys): New.
(opts): Add --locate-external-keys.
(main): Implement that.
* g10/getkey.c (get_pubkey_byname): Implement GET_PUBKEY_NO_LOCAL.
(get_best_pubkey_byname): Add arg 'mode' and pass on to
get_pubkey_byname. Change callers.
* g10/keylist.c (public_key_list): Add arg 'no_local'.
(locate_one): Ditto. Pass on to get_best_pubkey_byname.
--
This new command is a shortcut for
--auto-key-locate nodefault,clear,wkd,... --locate-key
and uses the default or configured AKL list but does so without local.
See also
GnuPG-bug-id: 4599
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (enum get_pubkey_modes): New.
* g10/getkey.c (get_pubkey_byname): Repalce no_akl by a mode arg and
change all callers.
--
This change prepares the implementation of GET_PUBKEY_NO_LOCAL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkey_for_sig): New.
(get_pubkeyblock_for_sig): New.
* g10/mainproc.c (issuer_fpr_raw): Give global scope.
(check_sig_and_print): Use get_pubkeyblock_for_sig.
* g10/pkclist.c (check_signatures_trust): Use get_pubkey_for_sig.
* g10/sig-check.c (check_signature2): Ditto.
(check_signature_over_key_or_uid): Ditto.
--
GnuPG-bug-id: 4046
The whole getkey stuff is still a mess with way to much duplication
and missing caching of already fetched data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (get_revocation_reason): New.
(list_standalone_revocation): Extend function.
--
Note that this function extends the "rvs" field signature-class (field
11) with the revocation reason. GPGME does not yet parse this but it
can be expected that the comma delimiter does not break other parsers.
A new field is added to the "rvs" (and in future also the "rev")
record to carry a record specific comment. Hopefully all parsers
meanwhile learned the lesson from other new fields and don't bail out
on more fields than they know about.
This is partial solution to
GnuPG-bug-id: 1173
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Make --pgp6 an alias for --pgp7.
* common/compliance.h (gnupg_compliance_mode): Remove CO_PGP6.
* g10/options.h (PGP6): Remove. Adjust all users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Tuen options --force-mdc, --no-force-mdc, --disable-mdc
and --no-disable-mdc into NOPs.
* g10/encrypt.c (use_mdc): Simplify. MDC is now almost always used.
(use_aead): Ignore MDC options. Print warning for missing MDC feature
flags.
* g10/pkclist.c (warn_missing_mdc_from_pklist): Rename to ...
(warn_missing_aead_from_pklist): this and adjust.
--
The MDC is now always used except with --rfc2440 which will lead to a
a big fat warning.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_user_id_string): Add arg R_NOUID. Change call
callers.
(get_user_id): Add arg R_NOUID. Change call callers.
* g10/mainproc.c (issuer_fpr_string): Make global.
* g10/keylist.c (list_keyblock_colon): Print a '?' for a missing key
also in --list-mode. Print the "issuer fpr" field also if there is an
issuer fingerprint subpacket.
--
Scripts used to rely on the "User ID not found" string even in the
--with-colons listing. However, that is not a good idea because that
string is subject to translations etc. Now we have an explicit way of
telling that a key is missing. For example:
gpg --list-sigs --with-colons | \
awk -F: '$1=="sig" && $2=="?" {if($13){print $13}else{print $5}}'
Prints all keyids or fingerprint of signing keys for which we do not
have the key in our local keyring.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (select_aead_from_pklist): Return the AEAD_algo.
* g10/encrypt.c (use_aead): Return the AEAD algo.
(encrypt_simple): Adjust for this change.
(encrypt_crypt): Ditto.
(encrypt_filter): Ditto.
* g10/sign.c (sign_symencrypt_file): Ditto.
* g10/misc.c (MY_GCRY_CIPHER_MODE_EAX): New.
(openpgp_aead_algo_info): New.
* g10/cipher-aead.c (MY_GCRY_CIPHER_MODE_EAX): Remove.
(write_header): Use new fucntion.
* g10/decrypt-data.c (MY_GCRY_CIPHER_MODE_EAX): Remove.
(decrypt_data): Use new function. Also allow for chunkbytes other
than 10.
--
Note that other chunk bytes than 10 and in particular 0 (64 byte
chunks) have not yet been tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/dek.h (DEK): Turn fields use_mdc, algo_printed and symmetric
into single bit vars. Make sure they are always set to 1 or 0.
(DEK): New field use_aead.
* g10/options.h (struct opt): New field force_aead.
* g10/pkclist.c (select_aead_from_pklist): New.
* g10/gpg.c (oForceAEAD): New const.
(opts): New options "--force-aead".
(main): Set new option.
* g10/encrypt.c (use_aead): New.
(encrypt_simple): Implement new flags DEK.use_aead.
(encrypt_crypt): Ditto.
(encrypt_filter): Ditto.
* g10/sign.c (sign_symencrypt_file): Ditto.
--
This patch should be enough to detect whether AEAD can be used.
Not tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (default_recipient): Use hexfingerprint.
--
Note that on malloc failure this function now returns NULL instead of
terminating the process. However, under memory pressure any function
called latter will very likely fail as well.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (find_and_check_key): Call get_validity on a specific
keyblock.
--
When we have multiple keyrings, get_validity after
get_best_pubkey_byname should access same keyring. Or else, the
situation of an expired key in keyring A but valid key in keyring B
causes SEGV.
Thanks to Guido Günther for the use case and the log.
Debian-bug-id: 878812
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
For proper operations as a server we need to avoid global variables.
Thus we need to pass the session state CTRL to most functions. Quite
a lot of changes but fortunately straightforward to do.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (init_trustdb): Add and implement arg NO_CREATE.
Change to return an error code. Change all callers to to pass False
for NO_CREATE.
(tdb_get_ownertrust): New arg NO_CREATE. Call init_trustdb to test
for a non-existing trustdb. Change all callers to to pass False for
NO_CREATE.
(tdb_get_min_ownertrust): Ditto.
* g10/trust.c (get_ownertrust_with_min): Add arg NO_CREATE. Call
init_trustdb for a quick check.
(get_ownertrust_info): Add arg NO_CREATE.
(get_ownertrust_string): Ditto.
* g10/gpgv.c (get_ownertrust_info): Adjust stub.
* g10/test-stubs.c (get_ownertrust_info): Ditto.
* g10/mainproc.c (list_node): Call get_ownertrust_info with NO_CREATE
set.
* g10/pubkey-enc.c (get_it): Ditto.
--
Fixes-commit: effa80e0b5
For details see mails on Feb 27 and 28 by dkg, gniibe, and Justus to
gnupg-devel 'test failure on git master with
decrypt-session-key.scm (and: continuous integration?)'
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (struct pubkey_cmp_cookie): New type.
(key_is_ok, uid_is_ok, subkey_is_ok): New functions.
(pubkey_cmp): Likewise.
(get_best_pubkey_byname): Likewise.
* g10/keydb.h (get_best_pubkey_byname): New prototype.
* g10/keylist.c (locate_one): Use the new function.
* g10/pkclist.c (find_and_check_key): Likewise.
* tests/openpgp/Makefile.am (XTESTS): Add new test.
(TEST_FILES): Add new files.
* tests/openpgp/key-selection.scm: New file.
* tests/openpgp/key-selection/0.asc: Likewise.
* tests/openpgp/key-selection/1.asc: Likewise.
* tests/openpgp/key-selection/2.asc: Likewise.
* tests/openpgp/key-selection/3.asc: Likewise.
* tests/openpgp/key-selection/4.asc: Likewise.
--
When a name resembling a mail address is given to either --locate-keys
or --recipient, rank the search results and use only the most relevant
key.
This also lets us query which key will be used for encryption using
--locate-keys. However, note that --locate-keys may also return keys
incapable of encryption, though it will prefer keys that have an
encryption subkey.
GnuPG-bug-id: 2359
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/tofu.c: Include "sqrtu32.h".
(struct tofu_dbs_s.s): Rename get_trust_gather_other_keys to
get_trust_gather_signature_stats. Add new field
get_trust_gather_encryption_stats.
(initdb): Create the encryptions table.
(ask_about_binding): Show the encryption statistics too.
(tofu_register): Rename from this...
(tofu_register_signature): ... to this and update callers.
(tofu_register_encryption): New function.
(write_stats_status): Add parameters encryption_count,
encryption_first_done and encryption_most_recent. Update callers.
Compute the trust using the euclidean distance of the signature and
signature count. Compare with twice the threshold. Include
encryption count information in the TFS and TOFU_STATS lines.
(show_statistics): Also get information about the encrypted messages.
* g10/trustdb.c (tdb_get_validity_core): Use it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/pkclist.c (do_we_trust): Handle TRUST_NEVER, which can be
returned by the TOFU trust model.
(do_we_trust_pre): Print a different message if TRUSTLEVEL is
TRUST_NEVER.
(check_signatures_trust): Improve comment.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (oRecipientFile, oHiddenRecipientFile): New.
(opts): Add options --recipient-file and --hidden-recipient-file.
(main): Implement them. Also remove duplicate code from similar
options.
* g10/keydb.h (PK_LIST_FROM_FILE): New.
(PK_LIST_SHIFT): Bump up.
* g10/pkclist.c (expand_group): Take care of PK_LIST_FROM_FILE.
(find_and_check_key): Add and implement arg FROM_FILE.
(build_pk_list): Pass new value for new arg.
* g10/getkey.c (get_pubkey_fromfile): New.
* g10/gpgv.c (read_key_from_file): New stub.
* g10/test-stubs.c (read_key_from_file): New stub.
* g10/server.c (cmd_recipient): Add flag --file.
* g10/import.c (read_key_from_file): New.
* tests/openpgp/defs.scm (key-file1): New.
(key-file2): New.
* tests/openpgp/setup.scm: Add their private keys and import the
key-file1.
* tests/openpgp/encrypt.scm: Add new test.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add option "none" to --keyid-format.
* g10/options.h (KF_NONE): New.
* g10/keyid.c (format_keyid): Implement that.
(keystr): Use format "long" is KF_NONE is in use.
(keystr_with_sub): Ditto.
* g10/keylist.c (list_keyblock_print): Adjust indentaion for KF_NONE.
Factor some code out to ...
(print_key_line): new.
(print_fingerprint): Add mode 20.
* g10/mainproc.c (list_node): Use print_key_line. Replace MAINKEY by
flags.primary in the PK. Fix putting a " revoked..." string into the
colons format.
* g10/pkclist.c (do_edit_ownertrust): Use print_key_line. This
slightly changes the putput format.
* g10/revoke.c (gen_standard_revoke): Use print_key_line. This may
also put "expires: " into the output.
--
Due to user experience problems with the keyid and we better allow to
show the fingerprint instead. Note that we do not support v3 keys
anymore and thus there is no technical need for a user to know the
keyid.
GnuPG-bug-id: 2379
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (struct result): Move from here...
* g10/keydb.h (struct pubkey): ... to here. Update users.
* g10/gpg.c (check_user_ids): Move from here...
* g10/getkey.c (get_pubkeys): ... to here. Update users. Use
get_pubkey_byname to look up the keys (this also prunes invalid keys).
(pubkey_free): New function.
(pubkeys_free): New function.
* g10/gpg.c (main): Don't check for ambiguous key specifications.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Regression-due-to: e8c53fc
This change not only moves the checks for ambiguous key specifications
from gpg.c to getkey.c, it also disables the checks. The old code was
too divorced from the actual key lookups and, as such, it reproduced
the logic. Unfortunately, the reproduction was a poor one: despite
fixing some inconsistencies (e.g., 10cca02), it still didn't deal with
group expansion or the auto key lookup functionality. Given the
amount of instability introduced by this change, we (Neal & Werner)
decided it is better to defer introducing this functionality until
2.3.
* g10/gpg.c (main): If --encrypt-to-default-key is specified, don't
add --default-key's value to REMUSR here...
* g10/pkclist.c (build_pk_list): ... do it here.
* tests/openpgp/Makefile.am (TESTS): Add default-key.test.
* tests/openpgp/default-key.test: New file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/pkclist.c (build_pk_list): Remove parameter use, which is always
called set to PUBKEY_USAGE_ENC. Update callers.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keydb.h (PK_LIST_ENCRYPT_TO, PK_LIST_HIDDEN, PK_LIST_CONFIG)
(PK_LIST_SHIFT): New.
* g10/pkclist.c (build_pk_list): Use them here.
* g10/gpg.c (check_user_ids, main): Ditto.
* g10/gpg.c (main): Set PK_LIST_CONFIG for REMUSR and LOCUSR.
(check_user_ids): Skip check for command line specified options.
--
If a key has been given on the command line and it has not been
given by one of the encrypt-to options, we now skip the checks. The
reason is that the actual key selection code does its own checks and
provides proper status message to the caller to detect the wrong keys.
Without this we would break most frontends because they expect for
example STATUS_INV_RECP.
Signed-off-by: Werner Koch <wk@gnupg.org>
Werner Koch