* scd/apdu.c (close_pcsc_reader): Unlock the reader_table_lock.
(apdu_dev_list_finish): Release the context when no readers.
--
Fixes-commit: 46d185f603
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (close_pcsc_reader): Check if it's not in the loop.
--
GnuPG-bug-id: 4998
Reported-by: Kevin Locke
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/export.c (export_ssh_key): Do not close stdout.
--
stdout should never be closed; this fixes this minor bug.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_get_passphrase): Never repeat in loopback mode;
same as with !OPT_NEWSYMKEY.
--
In loopback mode there shall not be any repeat because the caller is
expected to do any confirmation before passing a new passphrase to
gpg.
Fixes-commit: eace4bbe1d
GnuPG-bug-id: 4991
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pubkey-enc.c (get_session_key): Don't skip at no PUBKEY_USAGE_ENC.
Emit information the key has no 'encrypt' usage.
--
GnuPG-bug-id: 4246
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
It is a bit surprising that nothing happens if no key is specified to
--delete-key et al. Although this is common Unix behaviour the use
might have expected that it behaves like --export and deletes all
keys. Sure we don't do the latter, so a short notice will help.
GnuPG-bug-id: 4959
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/genkey.c (agent_ask_new_passphrase): No qualitybar.
* g10/call-agent.c (agent_get_passphrase): Ditto.
* sm/call-agent.c (gpgsm_agent_ask_passphrase): Ditto.
--
The concept of a passphrase quality indicator is anyway questionable
because user are smart enough to trick them out and they also tend to
limit the actually used entropy.
Except for the red/green switching (to show whether constraints are
fulfilled) our qualitybar is pretty bad and thus worse than none.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (agent_get_passphrase): Add arg pininfo.
* agent/genkey.c (check_passphrase_constraints): New arg no_empty.
* agent/command.c (reenter_passphrase_cmp_cb): New.
(cmd_get_passphrase): Add option --newsymkey.
--
This new option allows to present a passphrase with the usual repeat
box as it is used by gpg-agent's internal key generation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/encrypt.c (setup_symkey): Use default_cipher_algo function
instead of the fallback s2k_cipher_algo. Fix error code.
(encrypt_simple): Use setup_symkey.
--
Aside of removing code duplication this patch fixes the flaw that the
S2K cipher algorithm was used when mixing public key and symmetric
encryption or signatures with symmetric encrypion. The
default_algorithm function should be used here so that the command
line option --cipher-algo and --personal-cipher-preferences have an
effect.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.h (PK_ALGO_FLAG_RSAPSS): New.
* common/compliance.c (gnupg_pk_is_compliant): Add arg alog_flags and
test rsaPSS. Adjust all callers.
(gnupg_pk_is_allowed): Ditto.
* sm/misc.c (gpgsm_ksba_cms_get_sig_val): New wrapper function.
(gpgsm_get_hash_algo_from_sigval): New.
* sm/certcheck.c (gpgsm_check_cms_signature): Change type of sigval
arg. Add arg pkalgoflags. Use the PK_ALGO_FLAG_RSAPSS.
* sm/verify.c (gpgsm_verify): Use the new wrapper and new fucntion to
also get the algo flags. Pass algo flags along.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (CMD_UPDATE_BINARY): New.
(iso7816_update_binary): New.
* scd/app-nks.c (do_deinit): Factor some code out to...
(flush_fid_cache): new.
(do_writecert): New.
(app_select_nks): Register new handler.
--
This can be used with gpg-card to write the 3 extra certificates of a
Telesec TCOS Signature Card v2. The card with the qualified signature
is distributed with the keys for encryption and advanced signatures
but without the certificates. The certificates can be downloaded from
the website after an mail confirmation. Unpacked the downloaded
zipfile has these certificates:
auth_zert.crt
sig_zert.crt
enc_zert.crt
Using gpg-card issue these commands:
writecert NKS-NKS3.4531 <sig_zert.crt
writecert NKS-NKS3.45B1 <enc_zert.crt
writecert NKS-NKS3.4571 <auth_zert.crt
Don't mix that up, tight now there is no checking that the
certificates match the public key. I also need to write another patch
to actually implement signing and encryption with these nistp256
certificates.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (parse_ldapserver_file): Add arg ignore_enoent.
(main): Use that arg for the default file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gpgrlhelp.c (read_write_history): New.
(gnupg_rl_initialize): Register new function.
* common/ttyio.c (my_rl_rw_history): New var.
(tty_private_set_rl_hooks): Add arg read_write_history.
(tty_read_history): New.
(tty_write_history): New.
* tools/gpg-card.c (HISTORYNAME): New.
(oNoHistory): New enum value.
(opts): New option --no-history.
(cmd_history): New.
(cmds): New command "history".
(interactive_loop): Read and save the history.
* tools/gpg-connect-agent.c (HISTORYNAME): New.
(opts): New option --no-history.
(main): Read and save the history. New command /history.
--
Yeah, finally we have stored history; I should have added this much
earlier.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_serialno): Set/clear card removed flags for all
connections using the current card.
--
This seems to solve the problems I had in gpg-card and ssh. I am not
sure why the old code was done this way - maybe an oversight when
adding support for multiple cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_change_pin): Add arg 'nullpin'.
* tools/gpg-card.h (struct card_info_s): Add field 'card_removed'.
* tools/gpg-card.c (fixup_scd_errors): New.
(maybe_set_card_removed): New.
(list_one_kinfo): Change type of first arg to get access to INFO. Set
card_removed flag.
(list_all_kinfo): Improve label alignment.
(cmd_list): Check that the current card is still available.
(cmd_passwd): Add option --nullpin and menu to chnage TCOS PINs.
(dispatch_command): Handle card_removed flag.
(interactive_loop): Ditto.
--
Note that that I was not able to change the NullPIN of the standard
PIN using a Signature V2 Brainpool test card. Changing the NullPIN of
the QES PIN worked, though. I checked the commands send to scdaemon
and they were correct - I used the very same command with
gpg-connect-agent last week to set a Pin for a production Brainpool
Signature card. Thus this might be a problem with this specific test
card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (main) <aSign,aEncr>: Uses gpgrt_fcancel on error.
--
When creating a signature or encrypting and the respective key is not
available or the user canceled the PIN entry gpgsm prints the initial
part of the message due to internal buffering in gpgrt. By using
gpgrt_fcancel we can avoid this at least as long as the data is less
than the standard buffer size (which is currently 8k). If is not a
complete solution but the best we can do easily. Outputting to the
tty is anyway more of a testing aid than for real use.
This makes use of the new gpgrt_fcancel API.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certdump.c: Include membuf.h.
(gpgsm_print_serial_decimal): New.
* sm/keylist.c (list_cert_raw): Print s/n also in decimal
(list_cert_std): Ditto.
--
Many CA's print the serial number in decimal on their cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-scd.c: Factor re-usable code out to ...
* agent/call-daemon.c: new. Store infos in an array to allow for
other backend daemons.
* agent/Makefile.am (gpg_agent_SOURCES): Add new file.
* agent/agent.h: Include assuan.h.
(enum daemon_type): New.
(opt): Replace scdaemon_program by daemon_program array. Replace
scd_local by a array d_local. Change users accordingly.
--
The model I'm using for a TPM daemon is the current scdaemon. That
includes start and stop handlers plus liveness checks and an assuan
socket generator. To avoid massive code duplication (and save me a
lot of effort), I've elected to strip this code out of call-scd.c into
a generic framework which can then be reused as is by the TPM handling
daemon.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Co-authored-by: Werner Koch <wk@gnupg.org>
Modified original patch for 2.2 heavily to fit the new framework used
in master (gnupg 2.3)
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.h (gc_component_id_t): Align order with gc_component
array.
--
Fixes-commit: b4f1159a5b
gpgconf: Rewrite the gpgconf-comp module
from 2020-03-12
Signed-off-by: Werner Koch <wk@gnupg.org>
--
For TPM support it is necessary to indroduce another type of shadow
key, so allow other agent functions to extract the type so they can
make the right decisions based on it.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Minor editorial changes by wk
* agent/pksign.c (do_encode_eddsa): First argument is NBITs,
so that it can support Ed448, as well as Ed25519.
(agent_pksign_do): Follow the change.
* agent/sexp-secret.c (fixup_when_ecc_private_key): No fix-up needed
for Ed448, it's only for classic curves.
* common/openpgp-oid.c (oidtable): Add Ed448.
* common/sexputil.c (get_pk_algo_from_key): Ed448 is only for EdDSA.
* g10/export.c (match_curve_skey_pk): Ed448 is for EdDSA.
* g10/keygen.c (gen_ecc): Support Ed448 with the name of "ed448".
(ask_algo, parse_key_parameter_part): Handle "ed448".
* g10/pkglue.c (pk_verify): Support Ed448.
(pk_check_secret_key): Support Ed448.
* g10/sign.c (hash_for): Defaults to SHA512 for Ed448.
(make_keysig_packet): Likewise.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/findkey.c (agent_is_eddsa_key): Remove dead case.
--
There is no possibility the call of key_parms_from_sexp returns
"eddsa".
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* sm/certcheck.c (do_encode_md): Take care of nistp521.
--
That curve is a bit odd in that it does not match a common hash digest
length. We fix that here for just this case instead of writing more
general code to support all allowed cases (i.e. hash shorter than Q).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/free-packet.c (is_mpi_copy_broken): New.
(my_mpi_copy): Mix gcry_mpi_copy.
--
Note that in this case it is better to do a runtime check.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (write_trust_status): Add arg mbox.
(check_signatures_trust): Appenmd mbox to the status lines.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkglue.h (sexp_extract_param_sos): New.
* g10/build-packet.c (sos_write): New.
(do_key, do_pubkey_enc, do_signature): Use sos_write for ECC.
* g10/export.c (cleartext_secret_key_to_openpgp): Use
sexp_extract_param_sos.
(transfer_format_to_openpgp): Use opaque MPI for ECC.
* g10/keygen.c (ecckey_from_sexp): Use sexp_extract_param_sos.
* g10/keyid.c (hash_public_key): Handle opaque MPI for SOS.
* g10/parse-packet.c (sos_read): New.
(parse_pubkeyenc,parse_signature,parse_key): Use sos_read for ECC.
* g10/pkglue.c (sexp_extract_param_sos): New.
(pk_verify): Handle opaque MPI for SOS.
(pk_encrypt): Use sexp_extract_param_sos.
* g10/seskey.c (encode_session_key): Use opaque MPI.
* g10/sign.c (do_sign): Use sexp_extract_param_sos.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (check_sig_and_print): Add failsafe check for PK.
Pass KEYBLOCK down do check_signatures_trust. Protect existsing error
ocde in case the signature expired.
* g10/pkclist.c (is_in_sender_list): New.
(check_signatures_trust): Add args keyblock and pk. Add new uid based
checking code.
* g10/test-stubs.c, g10/gpgv.c: Adjust stubs.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
