* tests/openpgp/defs.scm: We expect that stuff is now installed.
(tools): Fix the names.
(intsalled?, bin-prefix): Remove.
(tool-hardcoded): Simplify.
(gpg-conf'): Simplify.
(GNUPG_BUILDDIR): Do not anymore set this envvar.
* tests/tpm2dtests/defs.scm: Ditto.
--
This simplifies things a bit.
* tests/gpgconf.ctl.in: New.
* tests/Makefile.am (EXTRA_DIST): Add new file.
(TESTINST_DIRS): New.
(clean-local): New.
(clean-local-testinst): New.
(check-recursive): New hook.
(bin/gpgconf.ctl): Run a test install.
* tests/cms/Makefile.am (TESTS_ENVIRONMENT): Set new envvar
GNUPG_BUILD_ROOT.
* tests/gpgme/Makefile.am (TESTS_ENVIRONMENT): Ditto.
* tests/openpgp/Makefile.am (TESTS_ENVIRONMENT): Ditto.
* tests/pkits/Makefile.am (TESTS_ENVIRONMENT): Ditto.
* tests/tpm2dtests/Makefile.am (TESTS_ENVIRONMENT): Ditto.
--
Right now this helps only with the global configuraion dir which is
now not set and thus the build host'ss own /etc/gnupg does not anymore
affect the build.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_cipher_is_allowed): Allow GCM for gpgsm
in decrypt mode.
* tests/cms/samplemsgs/pwri-sample.gcm.p7m: Remove duplicated authtag
--
We allow GCM in de-vs mode for decryption although this has not been
evaluation. It is decryption and thus no serious harm may happen.
* tests/cms/samplemsgs/: Add sample messages.
* sm/gpgsm.c (main): Use gpgrt_fcancel on decryption error.
* sm/decrypt.c (decrypt_gcm_filter): New.
(gpgsm_decrypt): Use this filter if requested. Check authtag.
--
Note that the sample message pwri-sample.gcm.p7m is broken: The
authtag is duplicated to the authEncryptedContentInfo. I used a
temporary code during testing hack to that test message out.
* common/comopt.c, common/comopt.h: New.
* common/Makefile.am: Add them.
* g10/gpg.c: Include comopt.h.
(main): Also parse common.conf.
* sm/gpgsm.c: Include comopt.h.
(main): Set a flag for the --no-logfile option. Parse common.conf.
* tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add
pseudo option "use_keyboxd".
(known_pseudo_options_gpg): Add pseudo option "use_keyboxd".
(known_options_gpgsm): Remove "use-keyboxd".
* tests/openpgp/defs.scm (create-gpghome): Create common.conf.
* doc/examples/common.conf: New.
--
Note that --use-keybox still works but prints a warning. We will
eventually remove this option becuase it was marked as an experimental
feature anyway.
It would be too confusing if gpg and gpgsm use different key storages.
Further, other components (e.g. dirmngr or gpg-wks-client) which call
gpg or gpgsm need to be aware that the keyboxd is used and pass that
option on the command line. Now that common.conf is always read (even
if --no-options is used) those tools will work instantly.
* tests/tpm2dtests/start_sw_tpm.sh: New.
* tests/tpm2dtests/Makefile.am: Add.
--
This accidentally got left out of the initial commit for testing
6720f1343 ("tpm2d: add tests for the tpm2daemon")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Added to Makefile and wrote tiny ChangeLog.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Detect TPM emulator and enable tests.
* tests/tpm2dtests/: New test suite.
* tests/Makefile.am: Run tests.
--
Add a set of tests that exercise tpm2daemon handling of keys and
verify compatibility with non-tpm based keys.
Running this test infrastructure requires a tpm emulator, which is
tested for during configuration. If an emulator is not found, the
tests won't be run since they require the presence of a TPM (although
the TPM handling code will still be built).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
- Fixed tests/Makefile.am for make distcheck.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: New option --allow-old-cipher-algos.
(set_compliance_option): Set --rfc4880bis explictly to SHA256 and
AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440.
* g10/options.h (opt): Add flags.allow_old_cipher_algos.
* g10/misc.c (print_sha1_keysig_rejected_note): Always print the note
unless in --quiet mode.
* g10/encrypt.c (setup_symkey): Disallow by default algos with a
blocklengt < 128.
(encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES.
* g10/pkclist.c (algo_available): Take care of old cipher also.
(select_algo_from_prefs): Use AES as implicit algorithm by default.
* tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos.
--
GnuPG-bug-id: 3415
* tests/openpgp/all-tests.scm (all-tests): Replace extended-key-format
mode with a new keyboxd mode.
* tests/openpgp/defs.scm (create-gpghome): Ditto.
* tests/openpgp/gpgv.scm: Adjust for keyboxd mode.
* tests/openpgp/issue2419.scm: Fix to allow setting a log-file into
gpg.conf for debugging.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/defs.scm (pipe:gpg): Remove stray dash.
--
The extra dash is problematic at export and import because this does
not export a single key as intended by the tests but does two key
lookups where the second fails because that userid is always "-". For
the current keyring and keybox code this does not matter because it is
ignored. The keyboxd code however is more picky and returns an error.
Fixes-commit: 9609cb20e4
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Take care: Running under valgrind takes loooong and in some case you
may run into an valgrind internal error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/main.c: Switch to the new option parser.
* common/argparse.c, common/argparse.h: Remove.
* common/init.c (_init_common_subsystems): Do not call obsolete func.
* common/Makefile.am (common_sources): Remove those files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/keydb.h (struct kbnode_struct): Replace unused field RECNO by
new field TAG.
* g10/kbnode.c (alloc_node): Change accordingly.
* g10/import.c (import_one): Add arg r_valid.
(sec_to_pub_keyblock): Set tags.
(resync_sec_with_pub_keyblock): New.
(import_secret_one): Change return code to gpg_error_t. Return an
error code if sec_to_pub_keyblock failed. Resync secret keyblock.
--
When importing an invalid secret key ring for example without key
binding signatures or no UIDs, gpg used to let gpg-agent store the
secret keys anyway. This is clearly a bug because the diagnostics
before claimed that for example the subkeys have been skipped.
Importing the secret key parameters then anyway is surprising in
particular because a gpg -k does not show the key. After importing
the public key the secret keys suddenly showed up.
This changes the behaviour of
GnuPG-bug-id: 4392
to me more consistent but is not a solution to the actual bug.
Caution: The ecc.scm test now fails because two of the sample keys
don't have binding signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* gpgscm/scheme.c (gc_reservation_failure): Fix adding ";".
[!NDEBUG] (scheme_init_custom_alloc): Don't init seserved_lineno.
--
Picked from libgpg-error commit of:
8a9397896fd202dcfb3fb46259e43bc05a0ddd2e
In some build environment, NDEBUG is defined (although it's
bad practice). This change supports such a situation.
GnuPG-bug-id: 3959
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/defs.scm: Add "disable-scdaemon". Remove
"scdaemon-program".
* tests/gpgme/gpgme-defs.scm, tests/gpgsm/gpgsm-defs.scm: Likewise.
* tests/inittests, tests/pkits/inittests: Add "disable-scdaemon"
--
Before this change, running "make check" accesses USB device by
scdaemon on host computer. If there is any smartcard/token available,
it may affect test results. Because default key choice depends on
smartcard/token availability now and existing tests have nothing about
testing smartcard/token, disabling scdaemon is good.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/gpgscm/scheme.c (CASE): Use unused attribute for GCC > 6.
(FALLTHROUGH): New for fallthrough.
(Eval_Cycle): Use FALLTHROUGH. Remove not-needed comment of
fallthrough.
--
Since GCC combines C preprocessor macro expansion, the fallthrough
comment doesn't work well to suppress warnings for
-Wimplicit-fallthrough, near the macro CASE. To handle this
problem, we use GCC's extension of unused label and fallthrough
attributes.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (oAllowMultisigVerification)
(oAllowMultipleMessages, oNoAllowMultipleMessages): Remove.
(opts): Turn --allow-multisig-verification, --allow-multiple-messages
and --no-allow-multiple-messages into NOPs
* g10/options.h (struct opt): Remove flags.allow_multiple_messages.
* g10/mainproc.c (proc_plaintext): Assume allow_multiple_messages is
false.
--
These options are very old compatibility hacks and should not be used
anymore. We keep them as dummy options in case someone has them in
the conf file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Require an MDC or AEAD
* tests/openpgp/defs.scm (create-gpghome): Use --ignore-mdc-error to
allow testing with the current files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/gnupg.scm (with-ephemeral-home-directory): Add
teadown-fn.
* tests/gpgsm/export.scm: Use -no-atexit version and stop-agent.
* tests/openpgp/decrypt-session-key.scm: Likewise.
* tests/openpgp/decrypt-unwrap-verify.scm: Likewise.
* tests/openpgp/defs.scm (have-opt-always-trust): Likewise.
(setup-environment-no-atexit): New.
(start-agent): Support no use of atexit.
* tests/gpgsm/gpgsm-defs.scm (setup-gpgsm-environment-no-atexit): New.
* tests/migrations/common.scm (untar-armored): Follow the change
of with-ephemeral-home-directory.
--
When gpg-agent detects homedir removal, it will automatically exit.
Then, call of 'gpgconf --kill all' will fail. So, stop-agent should
be called before the removal of homedir.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (opts): Add new option.
(opt_set_iobuf_size): New var.
(set_debug): Set the option.
* tests/openpgp/armor.scm: Use this option to revert the buffer size
to the one which used to exhibit the tested bugs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/Makefile.am [DISABLE_REGEX] (EXTRA_DIST, XTESTS):
Conditionalize.
* tests/openpgp/all-tests.scm (all-tests): Input file is Makefile.
--
The feature is only valid with !DISABLE_REGEX.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/Makefile.am (XTESTS): Add trust-pgp-4.scm.
(EXTRA_DIST): Remove the test file from EXTRA_DIST.
--
Now that issue 2923 is fixed, the trust-pgp-4 test passes as
expected and we can enable it again. That should help prevent
a future regression on this issue.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* tests/openpgp/defs.scm (create-gpghome): Add s2k-count.
--
My tests show only 2.5% improvement, but as we have that option now
let's use it.
real 9m12.604s
user 2m20.720s
sys 0m11.452s
real 8m3.815s
user 2m16.700s
sys 0m11.544s
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_scd): Support !BUILD_WITH_SCDAEMON.
* tests/openpgp/defs.scm (create-gpghome): Likewise.
* tests/gpgsm/gpgsm-defs.scm (create-gpgsmhome): Likewise.
--
We could modify gpg-agent to remove all support of scdaemon, with no
inclusion of call-scd.c, divert-scd.c, and learncard.c, but it would
not be worth to do that.
GnuPG-bug-id: 3316
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_scd): Support !BUILD_WITH_SCDAEMON.
* tests/openpgp/defs.scm (create-gpghome): Likewise.
* tests/gpgsm/gpgsm-defs.scm (create-gpgsmhome): Likewise.
--
We could modify gpg-agent to remove all support of scdaemon, with no
inclusion of call-scd.c, divert-scd.c, and learncard.c, but it would
not be worth to do that.
GnuPG-bug-id: 3316
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/quick-key-manipulation.scm: Fix expiration time
comparison.
--
This is a bug fix for Amelia Earhart who is probably in UTC-12.
When expiration date is specified, GnuPG interprets it as noon of the
date in local time.
Before this fix, the test compared the value by 2145916800 which is
2038-01-01 00:00:00 in UTC with allowance of 1 day. When the test
was ran in UTC-12 timezone, it failed because of noon in the timezone
is midnight of the next day in UTC.
GnuPG-bug-id: 3393
Reported-by: Daniel Kahn Gillmor
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/quick-key-manipulation.scm: Fix expiration time
comparison.
--
This is a bug fix for Amelia Earhart who is probably in UTC-12.
When expiration date is specified, GnuPG interprets it as noon of the
date in local time.
Before this fix, the test compared the value by 2145916800 which is
2038-01-01 00:00:00 in UTC with allowance of 1 day. When the test
was ran in UTC-12 timezone, it failed because of noon in the timezone
is midnight of the next day in UTC.
GnuPG-bug-id: 3393
Reported-by: Daniel Kahn Gillmor
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/Makefile.am (XTESTS): Remove test.
(EXTRA_DIST): Add test file.
--
There are two problems with this test: First a syntax error in the
file name so that the test was not used at all. Second the test
currently returns FAIL.
Fixes-commit: c23a69970b
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/trust-pgp-1.scm: New file.
* tests/openpgp/trust-pgp-2.scm: New file.
* tests/openpgp/trust-pgp-3.scm: New file.
* tests/openpgp/trust-pgp-4.scm: New file.
* tests/openpgp/trust-pgp/common.scm: New file.
* tests/openpgp/trust-pgp/scenario1.asc: New file.
* tests/openpgp/trust-pgp/scenario2.asc: New file.
* tests/openpgp/trust-pgp/scenario3.asc: New file.
* tests/openpgp/trust-pgp/scenario4.asc: New file.
* tests/openpgp/trust-pgp/alice.sec.asc: New file.
* tests/openpgp/trust-pgp/bobby.sec.asc: New file.
* tests/openpgp/trust-pgp/carol.sec.asc: New file.
* tests/openpgp/trust-pgp/david.sec.asc: New file.
* tests/openpgp/trust-pgp/frank.sec.asc: New file.
* tests/openpgp/trust-pgp/grace.sec.asc: New file.
* tests/openpgp/trust-pgp/heidi.sec.asc: New file.
* tests/openpgp/Makefile.am (XTESTS): Add new tests.
(TEST_FILES): Add new files.
(EXTRA_DIST): Add new common file.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* tests/openpgp/tofu.scm (gettrust): Moved to the common defs.scm
module.
(checktrust): Likewise.
* tests/openpgp/defs.scm (gettrust): New function.
(checktrust): Likewise.
--
These functions will be re-used by the tests for the PGP trust
model.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* tests/gpgscm/scheme.c (CASE): Rearrange so that the case statement
is at the front.
(Eval_Cycle): Improve fallthrough annotations.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/README: Add quickstart instructions, how to use
shell.scm, remove no longer used MKDATA.
Signed-off-by: Justus Winter <justus@g10code.com>
* configure.ac: New option --enable-all-tests.
* tests/gpgscm/ffi.c (ffi_init): New gloabl var *run-all-tests*.
* tests/openpgp/all-tests.scm (all-tests): Use that var instead
of *maintainer-mode*.
* Makefile.am (AM_DISTCHECK_CONFIGURE_FLAGS): Add --enable-all-tests.
--
It is better to have a separate option to run all tests than to put
this on top of --enable-maintainer-mode. This way we can also make
sure to run all tests during "make distcheck".
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/tests.scm (test-pool): Add delimiter lines.
--
This is to make those summaries a bit more simlar to those from
automake.
Signed-off-by: Werner Koch <wk@gnupg.org>
