* g10/keygen.c (keygen_set_std_prefs): Allow extra spaces before
preference elements. Detect the bracketed versions of the strings.
Ignore "aead".
--
This allows to c+p the list shown by pref with out remove the
brackets.
* g10/keyedit.c (keyedit_quick_set_primary): Issue a status error.
--
This allows GpgME to detect and report a failure if setting the primary
user ID of a key failed.
GnuPG-bug-id: 6126
* g10/keyedit.c (find_userid_by_namehash, find_userid): Add argument
want_valid. Skip invalid user IDs if valid is wanted.
(keyedit_quick_revuid): Ask find_userid() for any matching user ID.
(keyedit_quick_set_primary): Use find_userid() to find the user ID to
mark as primary.
* tests/openpgp/quick-key-manipulation.scm: Change second call of the
quick-set-primary-uid test to specify the user ID by its hash.
--
This makes it possible to specify the user ID to mark as primary via its
UID hash when calling --quick-set-primary-uid.
GnuPG-bug-id: 6126
* g10/mainproc.c (proc_encrypted): Make symmetric + pubkey encryption
de-vs compliant.
* g10/mainproc.c (struct symlist_item): New.
(struct mainproc_context): Add field symenc_list.
(release_list): Free that list.
(proc_symkey_enc): Record infos from symmetric session packet.
(proc_encrypted): Check symkey packet algos
--
The original check was too strong because it is in fact compliant to
encrypt with a symmetric key and and public key. Thus decryption
should issue a compliance status.
In addition we now check that the cipher algorithms used to
symmetrically encrypt the session key are all compliant. This is
similar to our check for all public key encrypted session key packets.
GnuPG-bug-id: 6119
Fixes-commit: b03fab09e188f7bb10237d4f20455e4026737e4e
Backported from 2.2
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_text_and_buffer): Fix off-by-one
--
Depending on the escaping and line wrapping the computed remaining
buffer length could be wrong. Fixed by always using a break to
terminate the escape detection loop. Might have happened for all
status lines which may wrap.
GnuPG-bug-id: T6027
* g10/keygen.c (keygen_set_std_prefs): Use the right variable when
reading AEAD preference string
--
GnuPG-bug-id: 6019
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
* g10/export.c (do_export_stream): Merge the key to get the properties
ready.
--
This makes
gpg --export --export-filter 'drop-subkey=usage=~a'
(Export all subkeys but those with the auth usage)
work without using the workaound of adding
--export-options export-clean
* g10/keyedit.c (find_userid_by_namehash, find_userid): New.
(keyedit_quick_revuid): Use find_userid() instead of iterating over the
nodes of the keyblock.
* tests/openpgp/quick-key-manipulation.scm: Add test for revoking a
user ID specified by its hash.
--
This makes it possible to specify the user ID to revoke as UID hash when
calling --quick-revoke-uid.
GnuPG-bug-id: 5936
* g10/mainproc.c (proc_symkey_enc): Issue new error code.
(proc_encrypted): Ditto.
--
This allows GPGME to return a better error message than "bad session
key" to the user. Technically we could get run into these errors also
in other cases but this more unlikley. For the command line use we
don't do anything to not change the expected output of the command
line interface.
GnuPG-bug-id: 5943
* g10/keyedit.c (menu_adduid): Move linefeed character to the format
string.
--
This fixes a literal '\n' in the error message and a missing line feed
after the error message.
* g10/gpg.c (main): Set LOG_NO_REGISTRY.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
(show_other_registry_entries): Print "DefaultLogFile".
--
The intention of this mostly forgotten registry entry was to allow for
easy debugging of the tools. However, with the global config file
common.conf things are anyway better. We disable the use for the
commonly used tools so that it does not look like calling gpg on the
command line seems to block with no output if the log
server (e.g. tcp://1.2.3.4:11111) is not reachable.
* g10/keygen.c (ask_user_id): Allow for the name to start with a
digit. Allow names shorter than 5.
--
The reason for this change is that we don't enforce these constraints
in the --quick-gen-key interface. I added the constraints right in the
beginning of gnupg to make sure that we have a uniform style for
user-ids. However, this is all problematic with non-Latin names
and we prefer to use mail addresses anyway.
* g10/gpg.c (main): Remove note about rfc4880bis.
* g10/keygen.c (keygen_set_std_prefs): Use only OCB in the AEAD
preference list.
--
It is more than unlikely that EAX will ever be used in practice and
thus we remove it from the preference list.
* g10/misc.c (openpgp_cipher_algo_mode_name): New.
* g10/decrypt-data.c (decrypt_data): Use function here.
--
Note that openpgp_cipher_algo_mode_name is different from the version
2.2 becuase we append ".CFB" here.
Without this change we would see
gpg: cipher algorithm 'AES256' may not be used in
--compliance=de-vs mode
This is confusing because AES256 is compliant. Now we see
gpg: cipher algorithm 'AES256.OCB' may not be used in
--compliance=de-vs mode
which gives a hint on the problem.
* g10/decrypt-data.c (decrypt_data): Add arg compliance_error. Adjust
all callers. Fail on compliance error only in --require-compliance
mode. Make sure to return an error if the buffer is missing; actually
that should be an assert.
* g10/mainproc.c (proc_encrypted): Delay printing of the compliance
mode status. Consult the compliance error now returned by
decrypt_data.
--
The actual case here is that we fail hard if a message has been AEAD
encrypted with one AEAD capable key and also with one passphrase. In
general the preference system takes care of not using AEAD if one
recipient's key does not support it. However, if the sender uses her
own AEAD-capable key _and_ a passphrase the message will be AEAD
encrypted. This change allows to decrypt that anyway along with a
warning message.
Note that this does currently not work in 2.3 due to a non-compliant
libgcrypt. We will however, backport this to 2.2.
* g10/sign.c (sign_symencrypt_file): Insert correct version and AEAD
information into symkey packet.
--
GnuPG-bug-id: 5856
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
* g10/options.h (opt): Add field flags.require_compliance.
* g10/gpg.c (oRequireCompliance): New.
(opts): Add --require-compliance.
(main): Set option.
* g10/mainproc.c (proc_encrypted): Emit error if non de-vs compliant.
(check_sig_and_print): Ditto.
* g10/encrypt.c (encrypt_crypt): Ditto.
--
Note that in the --encrypt and --verify cased other checks may kick in
earlier than this new --require-compliance controlled one.
* common/iobuf.c (filter_flush): Remove "src_len == 0" check.
* g10/compress-bz2.c (do_compress): Exit early if flush not
forced and input length is zero.
* g10/compress.c (do_compress): Likewise.
--
Remove "(src_len == 0)" check in filter_flush which was
introduced to fix compress failure caused by zero length
flush from iobuf_close. However this check broke enarmoring
file with length of zero. Patch instead fixes zero length
flush problem in compress filters.
GnuPG-bug-id: T5828
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/cipher-aead.c (do_hash): Add faster path for encrypting directly
from input buffer instead of memcpying then encrypting inplace.
--
When encrypting with AES256.OCB on AMD Ryzen 5800X, memcpy shows as
taking largest portion of computation time. Patch adds fast path for
AEAD encryption which largely eliminates need for memcpying when
doing AEAD encryption. AES256.OCB throughput increases from 2.2GB/s
to 4.2GB/s on said system (1.9x faster).
GnuPG-bug-id: T5828
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/decrypt-data.c (decrypt_data): Disable estream buffering for
output file.
--
Here estream is filled with iobuf_copy which already uses large buffers
so additional buffering in estream was just adding memory copy overhead.
GnuPG-bug-id: T5828
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/plaintext.c (handle_plaintext): Disable estream buffering in
binary modes.
--
Since in binary mode, large buffers are passed from source iobuf to
target estream, extra buffering in estream only causes extra memory
copying and overhead.
GnuPG-bug-id: T5828
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* common/iobuf.c (iobuf_copy): Use iobuf buffer size for temporary
buffers.
* g10/plaintext.c (handle_plaintext, do_hash): Likewise.
* g10/sign.c (sign_file): Likewise.
--
As iobuf will have zerocopy operation for read/write, it is better to
use same size buffers as iobuf for temporary copy buffers.
GnuPG-bug-id: T5828
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/sign.c (sign_file): Use iobuf_read instead of iobuf_get for
reading data from detached file.
--
This patch reduces iobuf_read per byte processing overhead and speeds
up detached signing.
Detached signing speed on AMD Ryzen 5800X (4.3GiB file, SHA256):
gpg process
user time
before: 3.951s
after: 1.898s (2.0x faster)
GnuPG-bug-id: T5826
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/plaintext.c (do_hash): Use iobuf_read instead of iobuf_get for
reading data; Use gcry_md_write instead of gcry_md_putc for hash data.
--
This patch reduces iobuf_read per byte processing overhead and speeds
up detached signature verifying.
Detached verifying speed on AMD Ryzen 5800X (4.3GiB file, SHA256):
gpg process
user time
before: 9.410s
after: 1.913s (4.9x faster)
GnuPG-bug-id: T5826
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/mainproc.c (proc_tree): Call ask_for_detached_datafile
with MD2=NULL.
--
Here, c->mfx.md2 is always NULL, in fact. But, text-wise
(when searching the use of "mfx.md2"), before the change, it used
mfx.md2, which is irrelevant in the handling of PKT_ONEPASS_SIG.
Note that: One-Pass Signature is not available in PGP2.
This fix removes (text-wise) unmatch of the calls of functions
hash_datafile_by_fd hash_datafiles, and ask_for_detached_datafile.
Fixes-commit: 88a916cdd40e43312ffcde6bb1c157fe1c122f74
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (mainproc_context): New member
'seen_pkt_encrypted_mdc'.
(release_list): Clear 'seen_pkt_encrypted_mdc'.
(proc_encrypted): Set 'seen_pkt_encrypted_mdc'.
(have_seen_pkt_encrypted_aead): Rename to...
(have_seen_pkt_encrypted_aead_or_mdc): ...this and add check for
'seen_pkt_encrypted_mdc'.
(proc_plaintext): Do not enable extra hash contexts when decrypting
MDC input.
--
Avoiding extra hash contexts speeds up CFB/MDC decryption quite
a lot. For example, decrypting symmetric-key AES-256 encrypted
4 GiB file from RAM to /dev/null sees ~3.4x speed increase on
AMD Ryzen 5800X:
AES256.CFB encryption: 783 MB/s
AES256.CFB decryption: 386 MB/s (before)
AES256.CFB encryption: 1.3 GB/s (after patch)
Note, AEAD is still significantly faster:
AES256.OCB encryption: 2.2 GB/s
AES256.OCB decryption: 3.0 GB/s
GnuPG-bug-id: T5820
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/cipher-aead.c (do_flush): Use PRIu64.
* g10/decrypt-data.c (aead_underflow): Likewise.
--
Even among LP64 data model machines, uint64_t type may differ;
unsigned long or unsigned long long.
Only portable way is use of PRIu64.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/filter.h (armor_filter_context_t): New fields dearmor_mode and
dearmor_state.
* g10/dearmor.c (dearmor_file): Set dearmor_mode.
* g10/armor.c (is_armor_header): Magic to switch to generic dearmor
mode.
(parse_header_line): Treat non OpenPGP armor in a special way.
(check_input): Ditto.
(radix64_read): Detect non OpenPGP armor END lines.
* g10/call-agent.c (learn_status_cb): Parse APPVERSION.
* g10/call-agent.h (struct agent_card_info_s): Add field appversion.
* g10/card-util.c (print_a_version): New.
(current_card_status): Print version from appversion.
--
This is a regression due to the PIV support. Note that the newer
gpg-card worked correctly.
GnuPG-bug-id: 5787
* g10/keygen.c (generate_subkeypair): On error, write error and
"key not created" message to status interface.
--
This change allows users of the status/command interface to detect
errors when adding a subkey to a key. Similar status messages are
output by do_generate_keypair.
GnuPG-bug-id: 5771
* g10/keygen.c (ask_algo): Request keygrip via cpr_get.
* doc/help.txt (gpg.keygen.keygrip): New help text.
--
This change makes it possible to add an existing (sub)key to
another key via the status/command interface.
GnuPG-bug-id: 5771
