* g10/pubkey-enc.c (get_session_key): Bail out if the algo is not
allowed in the current compliance mode.
* sm/decrypt.c (gpgsm_decrypt): Ditto.
--
The idea here is that the owner of the key created a non-compliant key
and later receives a mail encrypted to that key. The sender should
have checked this key too but we can't guarantee that. By hard
failing here the owner of the key will notice that he had created a
non-compliant key and thus has a chance to generate a new compliant
key. In case the compliant criteria changes and the owner wants to
decrypt an old message he can still switch gpg to another compliant
mode.
Fixes-commit: a0d0cbee76
GnuPG-bug-id: 3308
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_pk_is_compliant): Remove the Elgamal
signing check. We don't support Elgamal signing at all.
(gnupg_pk_is_allowed) <de-vs>: Revert encryption/decryption for RSA.
Check the curvenames for ECDH.
* g10/pubkey-enc.c (get_session_key): Print only a warning if the key
is not compliant.
* sm/decrypt.c (gpgsm_decrypt): Ditto. Use the same string as in gpg
so that we have only one translation.
--
We always allow decryption and print only a note if the key was not
complaint at the encryption site.
GnuPG-bug-id: 3308
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_pk_is_compliant): Swap P and Q for DSA
check. Explicitly check for allowed ECC algos.
(gnupg_pk_is_allowed): Swap P and Q for DSA check.
* g10/mainproc.c (proc_encrypted): Simplify SYMKEYS check. Replace
assert by debug message.
--
Note that in mainproc.c SYMKEYS is unsigned and thus a greater than 0
condition is surprising because it leads to the assumption SYMKEYS
could be negative. Better use a boolean test.
The assert could have lead to a regression for no good reason. Not
being compliant is better than breaking existing users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_pk_is_compliant): Add DSA with certain
parameters.
(gnupg_cipher_is_compliant): New function.
(gnupg_digest_is_compliant): Likewise.
* common/compliance.h (gnupg_cipher_is_compliant): New prototype.
(gnupg_digest_is_compliant): Likewise.
* common/status.h (STATUS_DECRYPTION_COMPLIANCE_MODE): New status.
(STATUS_VERIFICATION_COMPLIANCE_MODE): Likewise.
* doc/DETAILS: Document the new status lines.
* g10/mainproc.c (proc_encrypted): Compute compliance with CO_DE_VS
and report that using the new status line.
(check_sig_and_print): Likewise.
* sm/decrypt.c (gpgsm_decrypt): Likewise.
* sm/verify.c (gpgsm_verify): Likewise.
--
When decrypting data and verifying signatures, report whether the
operations are in compliance with the criteria for data classified as
VS-NfD. This information will be picked up by the frontend and
presented to the user.
GnuPG-bug-id: 3059
Signed-off-by: Justus Winter <justus@g10code.com>
* common/ksba-io-support.c: Include ksba-io-support.h instead of
../sm/gpgsm.h. Include util.h.
(writer_cb_parm_s): Remove const from 'pem_name'.
(gpgsm_destroy_writer): Free 'pem_name'.
(gpgsm_create_reader): Rename to ...
(gnupg_ksba_create_reader): this. Replace args CTRL and
ALLOW_MULTI_PEM by a new arg FLAGS. Change the code to evaluate
FLAGS. Change all callers to pass the FLAGS.
(gpgsm_create_writer): Rename to ...
(gnupg_ksba_create_writer): this. Replace arg CTRL by new arg FLAGS.
Add arg PEM_NAME. Evaluate FLAGS. Store a copy of PEM_NAME. Change
all callers to pass the FLAGS and PEM_NAME.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_add_resource): Make ANY_REGISTERED
file-global. Write a STATUS_ERROR.
(maybe_create_keyring_or_box): Check for non-accessible but existant
file.
(keydb_search): Write a STATUS_ERROR if no keyring has been registered
but continue to return NOT_FOUND.
* sm/keydb.c (keydb_add_resource): Rename ANY_PUBLIC to ANY_REGISTERED
and make file-global. Write a STATUS_ERROR.
(keydb_search): Write a STATUS_ERROR if no keyring has been registered
but continue to return NOT_FOUND. Also add new arg CTRL and change
all callers to pass it down.
Signed-off-by: Werner Koch <wk@gnupg.org>
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
* certreqgen.c (get_parameter_uint, create_request): Create
an extension for key usage when requested.
* gpgsm.c (main): Install emergency_cleanup also as an atexit
handler.
* verify.c (gpgsm_verify): Removed the separate error code
handling for KSBA. We use shared error codes anyway.
* export.c (export_p12): Removed debugging code.
* encrypt.c (gpgsm_encrypt): Put the session key in to secure memory.
message.
* decrypt.c (gpgsm_decrypt): Ditto.
* fingerprint.c (gpgsm_get_key_algo_info): New.
* sign.c (gpgsm_sign): Don't assume RSA in the status line.
* keylist.c (list_cert_colon): Really print the algorithm and key
length.
(list_cert_raw, list_cert_std): Ditto.
* gpgsm.h (opt): Add member CONFIG_FILENAME.
* gpgsm.c (main): Use it here instead of the local var.
(gpgsm_agent_genkey, gpgsm_agent_istrusted)
(gpgsm_agent_marktrusted, gpgsm_agent_havekey)
(gpgsm_agent_passwd): Add new arg CTRL and changed all callers.
(start_agent): New arg CTRL. Send progress item when starting a
new agent.
* sign.c (gpgsm_get_default_cert, get_default_signer): New arg
CTRL to be passed down to the agent function.
* decrypt.c (prepare_decryption): Ditto.
* certreqgen.c (proc_parameters, read_parameters): Ditto.
* certcheck.c (gpgsm_create_cms_signature): Ditto.
* import.c (parse_p12, popen_protect_tool): New.
* base64.c (gpgsm_create_reader): New arg ALLOW_MULTI_PEM.
Changed all callers.
(base64_reader_cb): Handle it here.
(gpgsm_reader_eof_seen): New.
(base64_reader_cb): Set a flag for EOF.
(simple_reader_cb): Ditto.
* import.c (print_imported_summary): New.
(check_and_store): Update the counters, take new argument.
(import_one): Factored out core of gpgsm_import.
(gpgsm_import): Print counters.
(gpgsm_import_files): New.
* gpgsm.c (main): Use the new function for import.
* gpgsm.c: Made --delete-key work.
* server.c (cmd_delkeys): New.
(register_commands): New command DELKEYS.
* decrypt.c (gpgsm_decrypt): Print a convenience note when RC2 is
used and a STATUS_ERROR with the algorithm oid.
certificate with the required key usage.
* gpgsm.c (main): Fixed a segv when using --outfile without an
argument.
* keylist.c (print_capabilities): Also check for non-repudiation
and data encipherment.
* certlist.c (cert_usage_p): Test for signing and encryption was
swapped. Add a case for certification usage, handle
non-repudiation and data encipherment.
(gpgsm_cert_use_cert_p): New.
(gpgsm_add_to_certlist): Added a CTRL argument and changed all
callers to pass it.
* certpath.c (gpgsm_validate_path): Use it here to print a status
message. Added a CTRL argument and changed all callers to pass it.
* decrypt.c (gpgsm_decrypt): Print a status message for wrong key
usage.
* verify.c (gpgsm_verify): Ditto.
* keydb.c (classify_user_id): Allow a colon delimited fingerprint.
