* g10/mainproc.c (proc_encrypted): Force a decryption failure if any
error has been seen.
* g10/decrypt-data.c (aead_checktag): Issue an ERROR line.
--
GnuPG-bug-id: 7042
Note that gpg in any case returns a failure exit code but due to
double forking GPGME would not see it.
* g10/cipher-aead.c (do_flush): Use %llu and a cast.
* g10/decrypt-data.c (aead_underflow): Ditto.
--
Fixes-commit: b2cedc108d
We don't use the system's printf but the one implemented by
us (gpgrt's estream-printf) thus the PRIu64 may or may not be correct.
We can't do much about the -Wformat errors due to our different
implementation.
* g10/misc.c (openpgp_cipher_algo_mode_name): New.
* g10/decrypt-data.c (decrypt_data): Use function here.
--
Note that openpgp_cipher_algo_mode_name is different from the version
2.2 becuase we append ".CFB" here.
Without this change we would see
gpg: cipher algorithm 'AES256' may not be used in
--compliance=de-vs mode
This is confusing because AES256 is compliant. Now we see
gpg: cipher algorithm 'AES256.OCB' may not be used in
--compliance=de-vs mode
which gives a hint on the problem.
* g10/decrypt-data.c (decrypt_data): Add arg compliance_error. Adjust
all callers. Fail on compliance error only in --require-compliance
mode. Make sure to return an error if the buffer is missing; actually
that should be an assert.
* g10/mainproc.c (proc_encrypted): Delay printing of the compliance
mode status. Consult the compliance error now returned by
decrypt_data.
--
The actual case here is that we fail hard if a message has been AEAD
encrypted with one AEAD capable key and also with one passphrase. In
general the preference system takes care of not using AEAD if one
recipient's key does not support it. However, if the sender uses her
own AEAD-capable key _and_ a passphrase the message will be AEAD
encrypted. This change allows to decrypt that anyway along with a
warning message.
Note that this does currently not work in 2.3 due to a non-compliant
libgcrypt. We will however, backport this to 2.2.
* g10/decrypt-data.c (decrypt_data): Disable estream buffering for
output file.
--
Here estream is filled with iobuf_copy which already uses large buffers
so additional buffering in estream was just adding memory copy overhead.
GnuPG-bug-id: T5828
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/cipher-aead.c (do_flush): Use PRIu64.
* g10/decrypt-data.c (aead_underflow): Likewise.
--
Even among LP64 data model machines, uint64_t type may differ;
unsigned long or unsigned long long.
Only portable way is use of PRIu64.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/decrypt-data.c (decrypt_data): Move aead algo detection up.
--
Note that the AEAD modes are not yet approved for --compliance=de-vs
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (fill_buffer): Use iobuf_read instead of iobuf_get
for reading data.
--
This patch reduces iobuf_read per byte processing overhead and speeds
up decryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
no-armor: user time pipe transfer rate
encrypt-aead: 1.02 1.0 GB/s
decrypt-aead: 10.8 185 MB/s
encrypt-cfb: 4.8 342 MB/s
decrypt-cfb: 12.7 157 MB/s
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt opt)
-------------------
gpg process
no-armor: user time pipe transfer rate
decrypt-aead: 7.3 263 MB/s
decrypt-cfb: 9.3 211 MB/s
gpg process
armor: user time pipe transfer rate
decrypt-aead: 27.0 77 MB/s
decrypt-cfb: 29.0 72 MB/s
Note: decryption results are much slower than encryption because of
extra SHA1 & RIPEMD160 hashing.
GnuPG-bug-id: 3786
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/cipher-aead.c (do_flush): No cast is correct.
* g10/decrypt-data.c (aead_underflow): No cast needed.
Use "%j" for uint64_t for chunklen.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/cipher-aead.c (write_header): Do not call set_nonce_and_ad.
(write_final_chunk): Do not increase chunkindex.
(do_flush): Call set_nonce_and_ad immediately before the first
encryption of a chunk. Bump up the chunkindex after writing the tag.
(do_free): Do not insert a zero length last chunk.
* g10/decrypt-data.c (aead_underflow): Fix the corresponding bug.
--
This fixes a bug in writing a zero length last chunk right before the
final chunk (which has by design a zero length). We also need to
adjust the decryption part because that assumed this zero length last
chunk.
Note that we use the term "last chunk" for the chunk which directly
precedes the "final chunk" which ends the entire encryption.
GnuPG-bug-id: 3774
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (aead_set_nonce, aead_set_ad): Merge into ...
(aead_set_nonce_and_ad): new single function. Change callers.
(decrypt_data): Do not set the nonce and ad here.
(aead_underflow): Get rid of the LAST_CHUNK_DONE hack.
--
The main change here is that we now re-init the context only right
before we decrypt and not after a checktag.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (aead_underflow): Factor reading and checking
code code out to ...
(fill_buffer, aead_checktag): new functions.
--
Here is a simple test script to check against a set of encrypted files
with naming convention like "symenc-aead-eax-c6-56.asc"
# ------------------------ >8 ------------------------
set -e
GPG=../g10/gpg
for file in "$@"; do
echo "${file##*/}" | ( IFS=- read dummy1 dummy2 mode cbyte len rest
len="${len%.*}"
cbyte="${cbyte#c}"
[ "$dummy1" != "symenc" -o "$dummy2" != "aead" ] && continue
echo "checking mode=$mode chunkbyte=$cbyte length=$len"
if ! $GPG --no-options --rfc4880bis --batch --passphrase "abc" \
-d < $file >tmp.plain 2>/dev/null; then
echo "Decryption failed for $file" >&2
exit 2
fi
plainlen=$(wc -c <tmp.plain)
if [ $plainlen -ne $len ]; then
echo "Plaintext length mismatch for $file (want=$len have=$plainlen)" >&2
exit 2
fi
)
done
echo "all files are okay" >&2
# ------------------------ 8< ------------------------
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cipher-aead.c (write_final_chunk): Do not bump up the chunk
index if the previous chunk was empty.
* g10/decrypt-data.c (aead_underflow): Likewise. Also handle a other
corner cases. Add more debug output.
--
GnuPG-bug-id: 3774
This fixes the reported case when the encrypted data is a multiple of
the chunk size. Then the chunk index for the final chunk was wrongly
incremented by 2. The actual fix makes use of the fact that the
current dfx->CHUNKLEN is 0 in this case. There is also some other
reorganizing to help with debugging. The thing seems to work now but
the code is not very clean - should be reworked. Creating test files
can be done with this script:
--8<---------------cut here---------------start------------->8---
csize=6
for len in 0 55 56 57; do
awk </dev/null -v i=$len 'BEGIN{while(i){i--;printf"~"}}' \
| gpg --no-options -v --rfc4880bis --batch --passphrase "abc" \
--s2k-count 1025 --s2k-digest-algo sha256 -z0 \
--force-aead --aead-algo eax --cipher aes -a \
--chunk-size $csize -c >symenc-aead-eax-c$csize-$len.asc
done
--8<---------------cut here---------------end--------------->8---
A LEN of 56 triggered the bug which can be seen by looking at the
"authdata:" line in the --debug=crypt,filter output.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cipher-aead.c (do_flush): Init ERR. Fix remaining chunklen
computation.
(do_free): Add dummy encryption. Close the cipher handle.
* g10/decrypt-data.c (aead_underflow): Rewrite.
--
Until we have integrated test into the test suite extensive tests can
also be done with a script like this:
--8<---------------cut here---------------start------------->8---
#!/bin/sh
set -e
GPG="../g10/gpg --rfc4880bis --pinentry-mode=loopback"
GPG="$GPG --passphrase abc --batch"
MKTDATA="$HOME/b/gnupg-2.0/tools/mk-tdata"
for chunksize in 6 7 12 13 14 30; do
for count in $(seq 1 200) $(seq 8100 8200) \
$(seq 16350 16400) $(seq 20000 20100); do
if [ ! -f "testfile-$count" ]; then
$MKTDATA $count >"testfile-$count"
fi
echo "testing chunk size 2^$chunksize with $count bytes"
$GPG --force-aead --aead-algo ocb --s2k-mode 0 --cipher AES -v -z 0 \
-c --chunk-size $chunksize \
<"testfile-$count" >"testfile-$count.gpg" 2>/dev/null
$GPG -vd <"testfile-$count.gpg" >"testfile-$count.out" 2>/dev/null
if ! cmp "testfile-$count" "testfile-$count.out"; then
echo "FAILED comparing count $count" >&2
exit 1
fi
done
done
echo All good
--8<---------------cut here---------------end--------------->8---
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (decode_filter_context_s): Rename field 'defer'
to 'holdback' and replace 'defer_filled' flag into 'holdbacklen'.
Change all users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_symkey_enc): Add field aead_algo.
* g10/build-packet.c (do_symkey_enc): Support version 5 packets.
* g10/parse-packet.c (parse_symkeyenc): Ditto.
* g10/encrypt.c (encrypt_symmetric): Force using a random session
key in AEAD mode.
(encrypt_seskey): Add and support arg aead_algo.
(write_symkey_enc): Ditto.
(encrypt_simple): Adjust accordingly.
(encrypt_filter): Ditto.
* g10/gpgcompose.c (sk_esk): For now call encrypt_seskey without AEAD
support.
* g10/mainproc.c (symkey_decrypt_seskey): Support AEAD. Nver call BUG
but return an error.
(proc_symkey_enc): Call symkey_decrypt_seskey in a bug compatible way.
* g10/import.c (check_prefs): Check AEAD preferences.
* g10/keyedit.c (show_prefs): Print AEAD preferences.
--
For easier debugging this patch also changes some diagnostics to also
print the encryption mode with the cipher algorithm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (select_aead_from_pklist): Return the AEAD_algo.
* g10/encrypt.c (use_aead): Return the AEAD algo.
(encrypt_simple): Adjust for this change.
(encrypt_crypt): Ditto.
(encrypt_filter): Ditto.
* g10/sign.c (sign_symencrypt_file): Ditto.
* g10/misc.c (MY_GCRY_CIPHER_MODE_EAX): New.
(openpgp_aead_algo_info): New.
* g10/cipher-aead.c (MY_GCRY_CIPHER_MODE_EAX): Remove.
(write_header): Use new fucntion.
* g10/decrypt-data.c (MY_GCRY_CIPHER_MODE_EAX): Remove.
(decrypt_data): Use new function. Also allow for chunkbytes other
than 10.
--
Note that other chunk bytes than 10 and in particular 0 (64 byte
chunks) have not yet been tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cipher-aead.c (MY_GCRY_CIPHER_MODE_EAX): New.
(write_header): Use it.
* g10/decrypt-data.c (MY_GCRY_CIPHER_MODE_EAX): New.
(decrypt_data): Use it.
* g10/misc.c (openpgp_aead_test_algo): Allow EAX.
--
This allows the use of EAX when the latest Libgcrypt master is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (PKT_ENCRYPTED_AEAD): New const.
* g10/dek.h (DEK): Increase size of use_aead to 4 bits.
* g10/filter.h (cipher_filter_context_t): Add new fields for AEAD.
* g10/packet.h (PKT_encrypted): Add fields aead_algo, cipher_algo, and
chunkbyte.
* g10/build-packet.c (do_encrypted_aead): New.
(build_packet): Call it.
* g10/parse-packet.c (dump_sig_subpkt): Handle SIGSUBPKT_PREF_AEAD.
(parse_one_sig_subpkt, can_handle_critical): Ditto.
(parse_encrypted): Clear new PKT_ENCRYPTED fields.
(parse_encrypted_aead): New.
(parse): Call it.
* g10/gpg.c (main): Take care of --rfc4880bis option when checking
compliance.
* g10/cipher-aead.c: Replace the stub by real code.
* g10/decrypt-data.c (decode_filter_ctx_t): Add fields for use with
AEAD.
(aead_set_nonce): New.
(aead_set_ad): New.
(decrypt_data): Support AEAD.
(aead_underflow): New.
(aead_decode_filter): New.
* g10/encrypt.c (use_aead): Make that new fucntion work.
(encrypt_simple): Use default_aead_algo() instead of EAX.
* g10/mainproc.c (proc_encrypted): Support AEAD.
(do_proc_packets): Support PKT_ENCRYPTED_AEAD.
--
This code has seen only a very few manual tests. Encrypting always
uses a 64k chunks and decryption has not been tested with larger
chunks. Those small chunks make debugging much faster.
Tests can be done using:
gpg --rfc4880bis --pinentry-mode=loopback --passphrase abc \
--force-aead --aead-algo ocb --s2k-mode 0 --cipher AES \
-v -z 0 --status-fd 2 -c <INFILE >OUTFILE
and
gpg --rfc4880bis --pinentry-mode=loopback --passphrase=abc \
--status-fd 2 -v -d <INFILE >OUTFILE
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (decrypt_data): If OPT.UNWRAP_ENCRYPTION is set,
copy the data to the output file instead of continuing to process it.
* g10/gpg.c (enum cmd_and_opt_values): Add new value oUnwrap.
(opts): Handle oUnwrap.
(main): Likewise.
* g10/options.h (opt): Add field unwrap_encryption.
* g10/plaintext.c (handle_plaintext): Break the output file selection
functionality into ...
(get_output_file): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1060
Debian-bug-id: 282061
* g10/gpg.h (g10_errstr): Remove macro and change all occurrences by
gpg_strerror.
(G10ERR_): Remove all macros and change all occurrences by their
GPG_ERR_ counterparts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (decrypt_data): Return an error code instead of
calling BUG().
--
This code path can be triggered by fuzzing gpg and thus with some
likeness also by corrupt messages for other reasons.
* g10/decrypt-data.c (decrypt_data): Do not distinguish between a bad
MDC packer header and a bad MDC.
--
The separate diagnostic was introduced for debugging a problems. For
explaining an MDC error a single error message is easier to
understand.
* g10/cpr.c (write_status_strings): New.
(write_status_text): Replace code by a call to write_status_strings.
* g10/mainproc.c (proc_encrypted): Remove show_session_key code.
* g10/decrypt-data.c (decrypt_data): Add new show_session_key code.
--
This feature can be used to return the session key for just a part of
a file. For example to downloading just the first 32k of a huge file,
decrypting that incomplete part and while ignoring all the errors
break out the session key. The session key may then be used on the
server to decrypt the entire file without the need to have the private
key on the server.
GnuPG-bug-id: 1389
Signed-off-by: Werner Koch <wk@gnupg.org>
DECRYPTION_INFO <mdc_method> <sym_algo>
Print information about the symmetric encryption algorithm and
the MDC method. This will be emitted even if the decryption
fails.
Werner Koch