* g10/build-packet.c (sos_write): Add an argument COMPAT. When
COMPAT=1, NBITS specifies number of bits when interpreted as MPI,
except the case when the first octet is zero.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
For SOS, an ECC point with prefix 0x40 can be represented in two ways.
One for 0x40 interpreted as 7-bit, another as 8-bit (MSB is zero).
This matters for fingerprint computation, so, the representation
should be preserved, or we should use another flag to hold the
difference in the representation...
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/decrypt-data.c (decrypt_data): Move aead algo detection up.
--
Note that the AEAD modes are not yet approved for --compliance=de-vs
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/main.h (DEFAULT_AEAD_ALGO): Set to OCB.
--
With the old code and using libgcrypt 1.9 would have switched from the
high performance OCB to the ugly EAX mode. We are free software, we
are OCB.
* g10/pubkey-enc.c (get_it): Remove check which mandates shorter
padding.
--
According to the section 8 of RFC 6637, the sender MAY use 21 bytes of
padding for AES-128 to provide 40-byte "m".
Reported-by: Metin Savignano
GnuPG-bug-id: 4908
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpg-card.h (struct card_info_s): Add manufacturer fields.
* tools/card-call-scd.c (release_card_info): Release them.
(learn_status_cb): Parse MANUFACTURER attribute.
* tools/gpg-card.c (get_manufacturer): Remove.
(list_card): Use the new attribute.
* g10/call-agent.h (struct agent_card_info_s): Add manufacturer fields.
* g10/call-agent.c (agent_release_card_info): Release them.
(learn_status_cb): Parse MANUFACTURER attribute.
* g10/card-util.c (get_manufacturer): Remove.
(current_card_status): Use new attribute.
--
This does away with the duplicated OpenPGP vendor tables; they are now
at a better place (app-openpgp.c).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (tdb_register_trusted_key): accept fingerprint as well
as long key ID.
* doc/gpg.texi: document that --trusted-key can accept a fingerprint.
--
GnuPG-bug-id: 4855
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Fixed uses or return and kept the old string to avoid breaking
translations.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (merge_selfsigs_main): Take a zero key creation time in
account.
--
Keys created at the Epoch have a creation time of 0; when figuring out
the latest signature with properties to apply to a key the usual
comparison A > B does not work if A is always 0. We now special case
this for the expiration and usage data.
Co-authored-by: gniibe@fsij.org
GnuPG-bug-id: 4670
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): New options --auto-key-import,
--no-auto-key-import, and --no-include-key-block.
(gpgconf_list): Add them.
* g10/options.h (opt): Add field flags.auto_key_import.
* g10/mainproc.c (check_sig_and_print): Use flag to enable that
feature.
* tools/gpgconf-comp.c: Give the new options a Basic config level.
--
Note that the --no variants of the options are intended for easy
disabling at the command line.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (read_key_from_file): Rename to ...
(read_key_from_file_or_buffer): this and add new parameters. Adjust
callers.
(import_included_key_block): New.
* g10/packet.h (PKT_signature): Add field flags.key_block.
* g10/parse-packet.c (parse_signature): Set that flags.
* g10/sig-check.c (check_signature2): Add parm forced_pk and change
all callers.
* g10/mainproc.c (do_check_sig): Ditto.
(check_sig_and_print): Try the included key block if no key is
available.
--
This is is the second part to support the new Key Block subpacket.
The idea is that after having received a signed mail, it is instantly
possible to reply encrypted - without the need for any centralized
infrastructure.
There is one case where this does not work: A signed mail is received
using a specified signer ID (e.g. using gpg --sender option) and the
key block with only that user ID is thus imported. The next time a
mail is received using the same key but with a different user ID; the
signatures checks out using the key imported the last time. However,
the new user id is not imported. Now when trying to reply to that
last mail, no key will be found. We need to see whether we can update
a key in such a case.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (SIGSUBPKT_KEY_BLOCK): New.
* g10/gpg.c (oIncludeKeyBlock): New.
(opts): New option --include-key-block.
(main): Implement.
* g10/options.h (opt): New flag include_key_block.
* g10/parse-packet.c (dump_sig_subpkt): Support SIGSUBPKT_KEY_BLOCK.
(parse_one_sig_subpkt): Ditto.
(can_handle_critical): Ditto.
* g10/sign.c (mk_sig_subpkt_key_block): New.
(write_signature_packets): Call it for data signatures.
--
This patch adds support for a to be proposed OpenPGP ferature:
Introduce the Key Block subpacket to align OpenPGP with CMS.
This new subpacket may be used similar to the CertificateSet of
CMS (RFC-5652) and thus allows to start encrypted communication
after having received a signed message. In practice a stripped down
version of the key should be including having only the key material
and the self-signatures which are really useful and shall be used by
the recipient to reply encrypted.
#### Key Block
(1 octet with value 0, N octets of key data)
This subpacket MAY be used to convey key data along with a signature
of class 0x00, 0x01, or 0x02. It MUST contain the key used to create
the signature; either as the primary key or as a subkey. The key
SHOULD contain a primary or subkey capable of encryption and the
entire key must be a valid OpenPGP key including at least one User ID
packet and the corresponding self-signatures.
Implementations MUST ignore this subpacket if the first octet does not
have a value of zero or if the key data does not represent a valid
transferable public key.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c (push_export_filters): New.
(pop_export_filters): New.
(export_pubkey_buffer): Add args prefix and prefixlen. Adjust
callers.
* g10/import.c (impex_filter_getval): Add property "fpr".
* g10/main.h (struct impex_filter_parm_s): Add field hexfpr.
--
The push and pop feature will help us to use the export filter
internally in gpg. Same for the export_pubkey_buffer change.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Change oLoadExtensions, oStrict, and oNoStrict to
use ARGPARSE_ignore and remove the code in the option switch.
--
This looks better and is also required for further simplifications of
gpgconf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c: Remove all regular option descriptions. They
are now read in from the component. Also remove a few meanwhile
obsolete options.
* agent/gpg-agent.c: Add option description which were only set in
gpgconf-comp.c.
* dirmngr/dirmngr.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* g10/gpg.c: Ditto.
--
This second part removes all regular option descriptions because they
can be read from the components. A few were missing in the components
and thus moved to there.
Signed-off-by: Werner Koch <wk@gnupg.org>
