gnupg/doc/gpg-agent.texi

@c Copyright (C) 2002 Free Software Foundation, Inc.
@c This is part of the GnuPG manual.
@c For copying conditions, see the file gnupg.texi.

@include defs.inc

@node Invoking GPG-AGENT
@chapter Invoking GPG-AGENT
@cindex GPG-AGENT command options
@cindex command options
@cindex options, GPG-AGENT command

@manpage gpg-agent.1
@ifset manverb
.B gpg-agent
\- Secret key management for GnuPG
@end ifset

@mansect synopsis
@ifset manverb
.B  gpg-agent
.RB [ \-\-homedir
.IR dir ]
.RB [ \-\-options
.IR file ]
.RI [ options ]
.br
.B  gpg-agent
.RB [ \-\-homedir
.IR dir ]
.RB [ \-\-options
.IR file ]
.RI [ options ]
.B  \-\-server
.br
.B  gpg-agent
.RB [ \-\-homedir
.IR dir ]
.RB [ \-\-options
.IR file ]
.RI [ options ]
.B  \-\-daemon
.RI [ command_line ]
@end ifset

@mansect description
@command{gpg-agent} is a daemon to manage secret (private) keys
independently from any protocol.  It is used as a backend for
@command{gpg} and @command{gpgsm} as well as for a couple of other
utilities.

The agent is automatically started on demand by @command{gpg},
@command{gpgsm}, @command{gpgconf}, or @command{gpg-connect-agent}.
Thus there is no reason to start it manually.  In case you want to use
the included Secure Shell Agent you may start the agent using:

@c From dkg on gnupg-devel on 2016-04-21:
@c
@c Here's an attempt at writing a short description of the goals of an
@c isolated cryptographic agent:
@c
@c   A cryptographic agent should control access to secret key material.
@c   The agent permits use of the secret key material by a supplicant
@c   without providing a copy of the secret key material to the supplicant.
@c
@c   An isolated cryptographic agent separates the request for use of
@c   secret key material from permission for use of secret key material.
@c   That is, the system or process requesting use of the key (the
@c   "supplicant") can be denied use of the key by the owner/operator of
@c   the agent (the "owner"), which the supplicant has no control over.
@c
@c   One way of enforcing this split is a per-key or per-session
@c   passphrase, known only by the owner, which must be supplied to the
@c   agent to permit the use of the secret key material.  Another way is
@c   with an out-of-band permission mechanism (e.g. a button or GUI
@c   interface that the owner has access to, but the supplicant does not).
@c
@c   The rationale for this separation is that it allows access to the
@c   secret key to be tightly controlled and audited, and it doesn't permit
@c   the supplicant to either copy the key or to override the owner's
@c   intentions.

@example
gpg-connect-agent /bye
@end example

@noindent
If you want to manually terminate the currently-running agent, you can
safely do so with:

@example
gpgconf --kill gpg-agent
@end example

@noindent
@efindex GPG_TTY
You should always add the following lines to your @code{.bashrc} or
whatever initialization file is used for all shell invocations:

@smallexample
GPG_TTY=$(tty)
export GPG_TTY
@end smallexample

@noindent
It is important that this environment variable always reflects the
output of the @code{tty} command.  For W32 systems this option is not
required.

Please make sure that a proper pinentry program has been installed
under the default filename (which is system dependent) or use the
option @option{pinentry-program} to specify the full name of that program.
It is often useful to install a symbolic link from the actual used
pinentry (e.g. @file{@value{BINDIR}/pinentry-gtk}) to the expected
one (e.g. @file{@value{BINDIR}/pinentry}).

@manpause
@noindent
@xref{Option Index}, for an index to @command{GPG-AGENT}'s commands and options.
@mancont

@menu
* Agent Commands::      List of all commands.
* Agent Options::       List of all options.
* Agent Configuration:: Configuration files.
* Agent Signals::       Use of some signals.
* Agent Examples::      Some usage examples.
* Agent Protocol::      The protocol the agent uses.
@end menu

@mansect commands
@node Agent Commands
@section Commands

Commands are not distinguished from options except for the fact that
only one command is allowed.

@table @gnupgtabopt
@item --version
@opindex version
Print the program version and licensing information.  Note that you cannot
abbreviate this command.

@item --help
@itemx -h
@opindex help
Print a usage message summarizing the most useful command-line options.
Note that you cannot abbreviate this command.

@item --dump-options
@opindex dump-options
Print a list of all available options and commands.  Note that you cannot
abbreviate this command.

@item --server
@opindex server
Run in server mode and wait for commands on the @code{stdin}.  The
default mode is to create a socket and listen for commands there.

@item --daemon [@var{command line}]
@opindex daemon
Start the gpg-agent as a daemon; that is, detach it from the console
and run it in the background.

As an alternative you may create a new process as a child of
gpg-agent: @code{gpg-agent --daemon /bin/sh}.  This way you get a new
shell with the environment setup properly; after you exit from this
shell, gpg-agent terminates within a few seconds.

@item --supervised
@opindex supervised
Run in the foreground, sending logs by default to stderr, and
listening on provided file descriptors, which must already be bound to
listening sockets.  This option is deprecated and not supported on
Windows.

If in @file{common.conf} the option @option{no-autostart} is set, any
start attempts will be ignored.

In --supervised mode, different file descriptors can be provided for
use as different socket types (e.g. ssh, extra) as long as they are
identified in the environment variable @code{LISTEN_FDNAMES} (see
sd_listen_fds(3) on some Linux distributions for more information on
this convention).
@end table

@mansect options
@node Agent Options
@section Option Summary

Options may either be used on the command line or, after stripping off
the two leading dashes, in the configuration file.

@table @gnupgtabopt

@anchor{option --options}
@item --options @var{file}
@opindex options
Reads configuration from @var{file} instead of from the default
per-user configuration file.  The default configuration file is named
@file{gpg-agent.conf} and expected in the @file{.gnupg} directory
directly below the home directory of the user.  This option is ignored
if used in an options file.

@anchor{option --homedir}
@include opt-homedir.texi


@item -v
@itemx --verbose
@opindex verbose
Outputs additional information while running.
You can increase the verbosity by giving several
verbose commands to @command{gpg-agent}, such as @samp{-vv}.

@item -q
@itemx --quiet
@opindex quiet
Try to be as quiet as possible.

@item --batch
@opindex batch
Don't invoke a pinentry or do any other thing requiring human interaction.

@item --faked-system-time @var{epoch}
@opindex faked-system-time
This option is only useful for testing; it sets the system time back or
forth to @var{epoch} which is the number of seconds elapsed since the year
1970.

@item --debug-level @var{level}
@opindex debug-level
Select the debug level for investigating problems. @var{level} may be
a numeric value or a keyword:

@table @code
@item none
No debugging at all.  A value of less than 1 may be used instead of
the keyword.
@item basic
Some basic debug messages.  A value between 1 and 2 may be used
instead of the keyword.
@item advanced
More verbose debug messages.  A value between 3 and 5 may be used
instead of the keyword.
@item expert
Even more detailed messages.  A value between 6 and 8 may be used
instead of the keyword.
@item guru
All of the debug messages you can get. A value greater than 8 may be
used instead of the keyword.  The creation of hash tracing files is
only enabled if the keyword is used.
@end table

How these messages are mapped to the actual debugging flags is not
specified and may change with newer releases of this program. They are
however carefully selected to best aid in debugging.

@item --debug @var{flags}
@opindex debug
Set debug flags.  All flags are or-ed and @var{flags} may be given
in C syntax (e.g. 0x0042) or as a comma separated list of flag names.
To get a list of all supported flags the single word "help" can be
used. This option is only useful for debugging and the behavior may
change at any time without notice.

@item --debug-all
@opindex debug-all
Same as @code{--debug=0xffffffff}

@item --debug-wait @var{n}
@opindex debug-wait
When running in server mode, wait @var{n} seconds before entering the
actual processing loop and print the pid.  This gives time to attach a
debugger.

@item --debug-quick-random
@opindex debug-quick-random
This option inhibits the use of the very secure random quality level
(Libgcrypt’s @code{GCRY_VERY_STRONG_RANDOM}) and degrades all request
down to standard random quality.  It is only used for testing and
should not be used for any production quality keys.  This option is
only effective when given on the command line.

On GNU/Linux, another way to quickly generate insecure keys is to use
@command{rngd} to fill the kernel's entropy pool with lower quality
random data.  @command{rngd} is typically provided by the
@command{rng-tools} package.  It can be run as follows: @samp{sudo
rngd -f -r /dev/urandom}.

@item --debug-pinentry
@opindex debug-pinentry
This option enables extra debug information pertaining to the
Pinentry.  As of now it is only useful when used along with
@code{--debug 1024}.

@item --no-detach
@opindex no-detach
Don't detach the process from the console.  This is mainly useful for
debugging.

@item --steal-socket
@opindex steal-socket
In @option{--daemon} mode, gpg-agent detects an already running
gpg-agent and does not allow to start a new instance. This option can
be used to override this check: the new gpg-agent process will try to
take over the communication sockets from the already running process
and start anyway.  This option should in general not be used.


@item -s
@itemx --sh
@itemx -c
@itemx --csh
@opindex sh
@opindex csh
@efindex SHELL
Format the info output in daemon mode for use with the standard Bourne
shell or the C-shell respectively.  The default is to guess it based on
the environment variable @code{SHELL} which is correct in almost all
cases.


@item --grab
@itemx --no-grab
@opindex grab
@opindex no-grab
Tell the pinentry to grab the keyboard and mouse.  This option should
be used on X-Servers to avoid X-sniffing attacks. Any use of the
option @option{--grab} overrides an used option @option{--no-grab}.
The default is @option{--no-grab}.

@anchor{option --log-file}
@item --log-file @var{file}
@opindex log-file
@efindex HKCU\Software\GNU\GnuPG:DefaultLogFile
Append all logging output to @var{file}.  This is very helpful in
seeing what the agent actually does. Use @file{socket://} to log to
socket.  If neither a log file nor a log file descriptor has been set
on a Windows platform, the Registry entry
@code{HKCU\Software\GNU\GnuPG:DefaultLogFile}, if set, is used to
specify the logging output.


@anchor{option --no-allow-mark-trusted}
@item --no-allow-mark-trusted
@opindex no-allow-mark-trusted
Do not allow clients to mark keys as trusted, i.e. put them into the
@file{trustlist.txt} file.  This makes it harder for users to inadvertently
accept Root-CA keys.


@anchor{option --no-user-trustlist}
@item --no-user-trustlist
@opindex no-user-trustlist
Entirely ignore the user trust list and consider only the global
trustlist (@file{@value{SYSCONFDIR}/trustlist.txt}).  This
implies the @ref{option --no-allow-mark-trusted}.

@item --sys-trustlist-name @var{file}
@opindex sys-trustlist-name
Changes the default name for the global trustlist from "trustlist.txt"
to @var{file}.  If @var{file} does not contain any slashes and does
not start with "~/" it is searched in the system configuration
directory (@file{@value{SYSCONFDIR}}).

@anchor{option --allow-preset-passphrase}
@item --allow-preset-passphrase
@opindex allow-preset-passphrase
This option allows the use of @command{gpg-preset-passphrase} to seed the
internal cache of @command{gpg-agent} with passphrases.

@anchor{option --no-allow-loopback-pinentry}
@item --no-allow-loopback-pinentry
@item --allow-loopback-pinentry
@opindex no-allow-loopback-pinentry
@opindex allow-loopback-pinentry
Disallow or allow clients to use the loopback pinentry features; see
the option @option{pinentry-mode} for details.  Allow is the default.

The @option{--force} option of the Assuan command @command{DELETE_KEY}
is also controlled by this option: The option is ignored if a loopback
pinentry is disallowed.

@item --no-allow-external-cache
@opindex no-allow-external-cache
Tell Pinentry not to enable features which use an external cache for
passphrases.

Some desktop environments prefer to unlock all
credentials with one master password and may have installed a Pinentry
which employs an additional external cache to implement such a policy.
By using this option the Pinentry is advised not to make use of such a
cache and instead always ask the user for the requested passphrase.

@item --allow-emacs-pinentry
@opindex allow-emacs-pinentry
Tell Pinentry to allow features to divert the passphrase entry to a
running Emacs instance.  How this is exactly handled depends on the
version of the used Pinentry.

@item --ignore-cache-for-signing
@opindex ignore-cache-for-signing
This option will let @command{gpg-agent} bypass the passphrase cache for all
signing operation.  Note that there is also a per-session option to
control this behavior but this command line option takes precedence.

@item --default-cache-ttl @var{n}
@opindex default-cache-ttl
Set the time a cache entry is valid to @var{n} seconds.  The default
is 600 seconds.  Each time a cache entry is accessed, the entry's
timer is reset.  To set an entry's maximum lifetime, use
@command{max-cache-ttl}.  Note that a cached passphrase may not be
evicted immediately from memory if no client requests a cache
operation.  This is due to an internal housekeeping function which is
only run every few seconds.

@item --default-cache-ttl-ssh @var{n}
@opindex default-cache-ttl
Set the time a cache entry used for SSH keys is valid to @var{n}
seconds.  The default is 1800 seconds.  Each time a cache entry is
accessed, the entry's timer is reset.  To set an entry's maximum
lifetime, use @command{max-cache-ttl-ssh}.

@item --max-cache-ttl @var{n}
@opindex max-cache-ttl
Set the maximum time a cache entry is valid to @var{n} seconds.  After
this time a cache entry will be expired even if it has been accessed
recently or has been set using @command{gpg-preset-passphrase}.  The
default is 2 hours (7200 seconds).

@item --max-cache-ttl-ssh @var{n}
@opindex max-cache-ttl-ssh
Set the maximum time a cache entry used for SSH keys is valid to
@var{n} seconds.  After this time a cache entry will be expired even
if it has been accessed recently or has been set using
@command{gpg-preset-passphrase}.  The default is 2 hours (7200
seconds).

@item --enforce-passphrase-constraints
@opindex enforce-passphrase-constraints
Enforce the passphrase constraints by not allowing the user to bypass
them using the ``Take it anyway'' button.

@item --min-passphrase-len @var{n}
@opindex min-passphrase-len
Set the minimal length of a passphrase.  When entering a new passphrase
shorter than this value a warning will be displayed.  Defaults to 8.

@item --min-passphrase-nonalpha @var{n}
@opindex min-passphrase-nonalpha
Set the minimal number of digits or special characters required in a
passphrase.  When entering a new passphrase with less than this number
of digits or special characters a warning will be displayed.  Defaults
to 1.

@item --check-passphrase-pattern @var{file}
@itemx --check-sym-passphrase-pattern @var{file}
@opindex check-passphrase-pattern
@opindex check-sym-passphrase-pattern
Check the passphrase against the pattern given in @var{file}.  When
entering a new passphrase matching one of these pattern a warning will
be displayed.  If @var{file} does not contain any slashes and does not
start with "~/" it is searched in the system configuration directory
(@file{@value{SYSCONFDIR}}).  The default is not to use any
pattern file.  The second version of this option is only used when
creating a new symmetric key to allow the use of different patterns
for such passphrases.

Security note: It is known that checking a passphrase against a list of
pattern or even against a complete dictionary is not very effective to
enforce good passphrases.  Users will soon figure up ways to bypass such
a policy.  A better policy is to educate users on good security
behavior and optionally to run a passphrase cracker regularly on all
users passphrases to catch the very simple ones.

@item --max-passphrase-days @var{n}
@opindex max-passphrase-days
Ask the user to change the passphrase if @var{n} days have passed since
the last change.  With @option{--enforce-passphrase-constraints} set the
user may not bypass this check.

@item --enable-passphrase-history
@opindex enable-passphrase-history
This option does nothing yet.

@item --pinentry-invisible-char @var{char}
@opindex pinentry-invisible-char
This option asks the Pinentry to use @var{char} for displaying hidden
characters.  @var{char} must be one character UTF-8 string.  A
Pinentry may or may not honor this request.

@item --pinentry-timeout @var{n}
@opindex pinentry-timeout
This option asks the Pinentry to timeout after @var{n} seconds with no
user input.  The default value of 0 does not ask the pinentry to
timeout, however a Pinentry may use its own default timeout value in
this case.  A Pinentry may or may not honor this request.

@item --pinentry-formatted-passphrase
@opindex pinentry-formatted-passphrase
This option asks the Pinentry to enable passphrase formatting when asking the
user for a new passphrase and masking of the passphrase is turned off.

If passphrase formatting is enabled, then all non-breaking space characters
are stripped from the entered passphrase.  Passphrase formatting is mostly
useful in combination with passphrases generated with the GENPIN
feature of some Pinentries.  Note that such a generated
passphrase, if not modified by the user, skips all passphrase
constraints checking because such constraints would actually weaken
the generated passphrase.

@item --pinentry-program @var{filename}
@opindex pinentry-program
Use program @var{filename} as the PIN entry.  The default is
installation dependent.  With the default configuration the name of
the default pinentry is @file{pinentry}; if that file does not exist
but a @file{pinentry-basic} exist the latter is used.

On a Windows platform the default is to use the first existing program
from this list:
@file{bin\pinentry.exe},
@file{..\Gpg4win\bin\pinentry.exe},
@file{..\Gpg4win\pinentry.exe},
@file{..\GNU\GnuPG\pinentry.exe},
@file{..\GNU\bin\pinentry.exe},
@file{bin\pinentry-basic.exe}
where the file names are relative to the GnuPG installation directory.


@item --pinentry-touch-file @var{filename}
@opindex pinentry-touch-file
By default the filename of the socket gpg-agent is listening for
requests is passed to Pinentry, so that it can touch that file before
exiting (it does this only in curses mode).  This option changes the
file passed to Pinentry to @var{filename}.  The special name
@code{/dev/null} may be used to completely disable this feature.  Note
that Pinentry will not create that file, it will only change the
modification and access time.


@item --scdaemon-program @var{filename}
@opindex scdaemon-program
Use program @var{filename} as the Smartcard daemon.  The default is
installation dependent and can be shown with the @command{gpgconf}
command.

@item --disable-scdaemon
@opindex disable-scdaemon
Do not make use of the scdaemon tool.  This option has the effect of
disabling the ability to do smartcard operations.  Note, that enabling
this option at runtime does not kill an already forked scdaemon.

@item --disable-check-own-socket
@opindex disable-check-own-socket
@command{gpg-agent} employs a periodic self-test to detect a stolen
socket.  This usually means a second instance of @command{gpg-agent}
has taken over the socket and @command{gpg-agent} will then terminate
itself.  This option may be used to disable this self-test for
debugging purposes.

@item --use-standard-socket
@itemx --no-use-standard-socket
@itemx --use-standard-socket-p
@opindex use-standard-socket
@opindex no-use-standard-socket
@opindex use-standard-socket-p
Since GnuPG 2.1 the standard socket is always used.  These options
have no more effect.  The command @code{gpg-agent
--use-standard-socket-p} will thus always return success.

@item --display @var{string}
@itemx --ttyname @var{string}
@itemx --ttytype @var{string}
@itemx --lc-ctype @var{string}
@itemx --lc-messages @var{string}
@itemx --xauthority @var{string}
@opindex display
@opindex ttyname
@opindex ttytype
@opindex lc-ctype
@opindex lc-messages
@opindex xauthority
These options are used with the server mode to pass localization
information.

@item --keep-tty
@itemx --keep-display
@opindex keep-tty
@opindex keep-display
Ignore requests to change the current @code{tty} or X window system's
@code{DISPLAY} variable respectively.  This is useful to lock the
pinentry to pop up at the @code{tty} or display you started the agent.

@item --listen-backlog @var{n}
@opindex listen-backlog
Set the size of the queue for pending connections.  The default is 64.

@anchor{option --extra-socket}
@item --extra-socket @var{name}
@opindex extra-socket
The extra socket is created by default, you may use this option to
change the name of the socket.  To disable the creation of the socket
use ``none'' or ``/dev/null'' for @var{name}.

Also listen on native gpg-agent connections on the given socket.  The
intended use for this extra socket is to setup a Unix domain socket
forwarding from a remote machine to this socket on the local machine.
A @command{gpg} running on the remote machine may then connect to the
local gpg-agent and use its private keys.  This enables decrypting or
signing data on a remote machine without exposing the private keys to the
remote machine.

@item --enable-extended-key-format
@itemx --disable-extended-key-format
@opindex enable-extended-key-format
@opindex disable-extended-key-format
These options are obsolete and have no effect.  The extended key format
is used for years now and has been supported since 2.1.12.  Existing
keys in the old format are migrated to the new format as soon as they
are touched.


@anchor{option --enable-ssh-support}
@item --enable-ssh-support
@itemx --enable-putty-support
@opindex enable-ssh-support
@opindex enable-putty-support

The OpenSSH Agent protocol is always enabled, but @command{gpg-agent}
will only set the @code{SSH_AUTH_SOCK} variable if this flag is given.

In this mode of operation, the agent does not only implement the
gpg-agent protocol, but also the agent protocol used by OpenSSH
(through a separate socket).  Consequently, it should be possible to use
the gpg-agent as a drop-in replacement for the well known ssh-agent.

SSH Keys, which are to be used through the agent, need to be added to
the gpg-agent initially through the ssh-add utility.  When a key is
added, ssh-add will ask for the password of the provided key file and
send the unprotected key material to the agent; this causes the
gpg-agent to ask for a passphrase, which is to be used for encrypting
the newly received key and storing it in a gpg-agent specific
directory.

Once a key has been added to the gpg-agent this way, the gpg-agent
will be ready to use the key.

Note: in case the gpg-agent receives a signature request, the user might
need to be prompted for a passphrase, which is necessary for decrypting
the stored key.  Since the ssh-agent protocol does not contain a
mechanism for telling the agent on which display/terminal it is running,
gpg-agent's ssh-support will use the TTY or X display where gpg-agent
has been started.  To switch this display to the current one, the
following command may be used:

@smallexample
gpg-connect-agent updatestartuptty /bye
@end smallexample

Although all GnuPG components try to start the gpg-agent as needed, this
is not possible for the ssh support because ssh does not know about it.
Thus if no GnuPG tool which accesses the agent has been run, there is no
guarantee that ssh is able to use gpg-agent for authentication.  To fix
this you may start gpg-agent if needed using this simple command:

@smallexample
gpg-connect-agent /bye
@end smallexample

Adding the @option{--verbose} shows the progress of starting the agent.

The @option{--enable-putty-support} is only available under Windows
and allows the use of gpg-agent with the ssh implementation
@command{putty}.  This is similar to the regular ssh-agent support but
makes use of Windows message queue as required by @command{putty}.

@anchor{option --ssh-fingerprint-digest}
@item --ssh-fingerprint-digest
@opindex ssh-fingerprint-digest

Select the digest algorithm used to compute ssh fingerprints that are
communicated to the user, e.g. in pinentry dialogs.  OpenSSH has
transitioned from using MD5 to the more secure SHA256.


@item --auto-expand-secmem @var{n}
@opindex auto-expand-secmem
Allow Libgcrypt to expand its secure memory area as required.  The
optional value @var{n} is a non-negative integer with a suggested size
in bytes of each additionally allocated secure memory area.  The value
is rounded up to the next 32 KiB; usual C style prefixes are allowed.
For an heavy loaded gpg-agent with many concurrent connection this
option avoids sign or decrypt errors due to out of secure memory error
returns.

@item --s2k-calibration @var{milliseconds}
@opindex s2k-calibration
Change the default calibration time to @var{milliseconds}.  The given
value is capped at 60 seconds; a value of 0 resets to the compiled-in
default.  This option is re-read on a SIGHUP (or @code{gpgconf
--reload gpg-agent}) and the S2K count is then re-calibrated.

@item --s2k-count @var{n}
@opindex s2k-count
Specify the iteration count used to protect the passphrase.  This
option can be used to override the auto-calibration done by default.
The auto-calibration computes a count which requires by default 100ms
to mangle a given passphrase.  See also @option{--s2k-calibration}.

To view the actually used iteration count and the milliseconds
required for an S2K operation use:

@example
gpg-connect-agent 'GETINFO s2k_count' /bye
gpg-connect-agent 'GETINFO s2k_time' /bye
@end example

To view the auto-calibrated count use:

@example
gpg-connect-agent 'GETINFO s2k_count_cal' /bye
@end example


@end table


@mansect files
@node Agent Configuration
@section Configuration

There are a few configuration files needed for the operation of the
agent. By default they may all be found in the current home directory
(@pxref{option --homedir}).

@table @file

@item gpg-agent.conf
@efindex gpg-agent.conf
  This is the standard configuration file read by @command{gpg-agent} on
  startup.  It may contain any valid long option; the leading
  two dashes may not be entered and the option may not be abbreviated.
  This file is also read after a @code{SIGHUP} however only a few
  options will actually have an effect.  This default name may be
  changed on the command line (@pxref{option --options}).
  You should backup this file.

@item trustlist.txt
@efindex trustlist.txt
  This is the list of trusted keys.  You should backup this file.

  Comment lines, indicated by a leading hash mark, as well as empty
  lines are ignored.  To mark a key as trusted you need to enter its
  fingerprint followed by a space and a capital letter @code{S}.  Colons
  may optionally be used to separate the bytes of a fingerprint; this
  enables cutting and pasting the fingerprint from a key listing output.  If
  the line is prefixed with a @code{!} the key is explicitly marked as
  not trusted.

  Here is an example where two keys are marked as ultimately trusted
  and one as not trusted:

  @cartouche
  @smallexample
  # CN=Wurzel ZS 3,O=Intevation GmbH,C=DE
  A6935DD34EF3087973C706FC311AA2CCF733765B S

  # CN=PCA-1-Verwaltung-02/O=PKI-1-Verwaltung/C=DE
  DC:BD:69:25:48:BD:BB:7E:31:6E:BB:80:D3:00:80:35:D4:F8:A6:CD S

  # CN=Root-CA/O=Schlapphuete/L=Pullach/C=DE
  !14:56:98:D3:FE:9C:CA:5A:31:6E:BC:81:D3:11:4E:00:90:A3:44:C2 S
  @end smallexample
  @end cartouche

Before entering a key into this file, you need to ensure its
authenticity.  How to do this depends on your organisation; your
administrator might have already entered those keys which are deemed
trustworthy enough into this file.  Places where to look for the
fingerprint of a root certificate are letters received from the CA or
the website of the CA (after making 100% sure that this is indeed the
website of that CA).  You may want to consider disallowing interactive
updates of this file by using the @ref{option --no-allow-mark-trusted}.
It might even be advisable to change the permissions to read-only so
that this file can't be changed inadvertently.

As a special feature a line @code{include-default} will include a global
list of trusted certificates (e.g. @file{@value{SYSCONFDIR}/trustlist.txt}).
This global list is also used if the local list is not available;
the @ref{option --no-user-trustlist} enforces the use of only
this global list.

It is possible to add further flags after the @code{S} for use by the
caller:

@table @code

@item relax
@cindex relax
Relax checking of some root certificate requirements.  As of now this
flag allows the use of root certificates with a missing basicConstraints
attribute (despite that it is a MUST for CA certificates) and disables
CRL checking for the root certificate.

@item cm
If validation of a certificate finally issued by a CA with this flag set
fails, try again using the chain validation model.

@item qual
The CA is allowed to issue certificates for qualified signatures.
This flag has an effect only if used in the global list.  This is now
the preferred way to mark such CA; the old way of having a separate
file @file{qualified.txt} is still supported.

@end table


@item sshcontrol
@efindex sshcontrol
This file is used when support for the secure shell agent protocol has
been enabled (@pxref{option --enable-ssh-support}). Only keys present in
this file are used in the SSH protocol.  You should backup this file.

The @command{ssh-add} tool may be used to add new entries to this file;
you may also add them manually.  Comment lines, indicated by a leading
hash mark, as well as empty lines are ignored.  An entry starts with
optional whitespace, followed by the keygrip of the key given as 40 hex
digits, optionally followed by the caching TTL in seconds and another
optional field for arbitrary flags.  A non-zero TTL overrides the global
default as set by @option{--default-cache-ttl-ssh}.

The only flag support is @code{confirm}.  If this flag is found for a
key, each use of the key will pop up a pinentry to confirm the use of
that key.  The flag is automatically set if a new key was loaded into
@code{gpg-agent} using the option @option{-c} of the @code{ssh-add}
command.

The keygrip may be prefixed with a @code{!} to disable an entry.

The following example lists exactly one key.  Note that keys available
through a OpenPGP smartcard in the active smartcard reader are
implicitly added to this list; i.e. there is no need to list them.

@cartouche
@smallexample
       # Key added on: 2011-07-20 20:38:46
       # Fingerprint:  5e:8d:c4:ad:e7:af:6e:27:8a:d6:13:e4:79:ad:0b:81
       34B62F25E277CF13D3C6BCEBFD3F85D08F0A864B 0 confirm
@end smallexample
@end cartouche

@item private-keys-v1.d/
@efindex private-keys-v1.d

  This is the directory where gpg-agent stores the private keys.  Each
  key is stored in a file with the name made up of the keygrip and the
  suffix @file{key}.  You should backup all files in this directory
  and take great care to keep this backup closed away.


@end table

Note that on larger installations, it is useful to put predefined
files into the directory @file{@value{SYSCONFSKELDIR}} so that newly created
users start up with a working configuration.  For existing users the
a small helper script is provided to create these files (@pxref{addgnupghome}).



@c
@c Agent Signals
@c
@mansect signals
@node Agent Signals
@section Use of some signals
A running @command{gpg-agent} may be controlled by signals, i.e. using
the @command{kill} command to send a signal to the process.

Here is a list of supported signals:

@table @gnupgtabopt

@item SIGHUP
@cpindex SIGHUP
This signal flushes all cached passphrases and if the program has been
started with a configuration file, the configuration file is read
again.  Only certain options are honored: @code{quiet},
@code{verbose}, @code{debug}, @code{debug-all}, @code{debug-level},
@code{debug-pinentry},
@code{no-grab},
@code{pinentry-program},
@code{pinentry-invisible-char},
@code{default-cache-ttl},
@code{max-cache-ttl}, @code{ignore-cache-for-signing},
@code{s2k-count},
@code{no-allow-external-cache}, @code{allow-emacs-pinentry},
@code{no-allow-mark-trusted}, @code{disable-scdaemon}, and
@code{disable-check-own-socket}.  @code{scdaemon-program} is also
supported but due to the current implementation, which calls the
scdaemon only once, it is not of much use unless you manually kill the
scdaemon.


@item SIGTERM
@cpindex SIGTERM
Shuts down the process but waits until all current requests are
fulfilled.  If the process has received 3 of these signals and requests
are still pending, a shutdown is forced.

@item SIGINT
@cpindex SIGINT
Shuts down the process immediately.

@item SIGUSR1
@cpindex SIGUSR1
Dump internal information to the log file.

@item SIGUSR2
@cpindex SIGUSR2
This signal is used for internal purposes.

@end table

@c
@c  Examples
@c
@mansect examples
@node Agent Examples
@section Examples

It is important to set the environment variable @code{GPG_TTY} in
your login shell, for example in the @file{~/.bashrc} init script:

@cartouche
@example
  export GPG_TTY=$(tty)
@end example
@end cartouche

If you enabled the Ssh Agent Support, you also need to tell ssh about
it by adding this to your init script:

@cartouche
@example
unset SSH_AGENT_PID
if [ "$@{gnupg_SSH_AUTH_SOCK_by:-0@}" -ne $$ ]; then
  export SSH_AUTH_SOCK="$(gpgconf --list-dirs agent-ssh-socket)"
fi
@end example
@end cartouche


@c
@c  Assuan Protocol
@c
@manpause
@node Agent Protocol
@section Agent's Assuan Protocol

Note: this section does only document the protocol, which is used by
GnuPG components; it does not deal with the ssh-agent protocol.  To
see the full specification of each command, use

@example
  gpg-connect-agent 'help COMMAND' /bye
@end example

@noindent
or just 'help' to list all available commands.

@noindent
The @command{gpg-agent} daemon is started on demand by the GnuPG
components.

To identify a key we use a thing called keygrip which is the SHA-1 hash
of an canonical encoded S-Expression of the public key as used in
Libgcrypt.  For the purpose of this interface the keygrip is given as a
hex string.  The advantage of using this and not the hash of a
certificate is that it will be possible to use the same keypair for
different protocols, thereby saving space on the token used to keep the
secret keys.

The @command{gpg-agent} may send status messages during a command or when
returning from a command to inform a client about the progress or result of an
operation.  For example, the @var{INQUIRE_MAXLEN} status message may be sent
during a server inquire to inform the client of the maximum usable length of
the inquired data (which should not be exceeded).

@menu
* Agent PKDECRYPT::       Decrypting a session key
* Agent PKSIGN::          Signing a Hash
* Agent GENKEY::          Generating a Key
* Agent IMPORT::          Importing a Secret Key
* Agent EXPORT::          Exporting a Secret Key
* Agent ISTRUSTED::       Importing a Root Certificate
* Agent GET_PASSPHRASE::  Ask for a passphrase
* Agent CLEAR_PASSPHRASE:: Expire a cached passphrase
* Agent PRESET_PASSPHRASE:: Set a passphrase for a keygrip
* Agent GET_CONFIRMATION:: Ask for confirmation
* Agent HAVEKEY::         Check whether a key is available
* Agent LEARN::           Register a smartcard
* Agent PASSWD::          Change a Passphrase
* Agent UPDATESTARTUPTTY:: Change the Standard Display
* Agent GETEVENTCOUNTER:: Get the Event Counters
* Agent GETINFO::         Return information about the process
* Agent OPTION::          Set options for the session
@end menu

@node Agent PKDECRYPT
@subsection Decrypting a session key

The client asks the server to decrypt a session key.  The encrypted
session key should have all information needed to select the
appropriate secret key or to delegate it to a smartcard.

@example
  SETKEY <keyGrip>
@end example

Tell the server about the key to be used for decryption.  If this is
not used, @command{gpg-agent} may try to figure out the key by trying to
decrypt the message with each key available.

@example
  PKDECRYPT
@end example

The agent checks whether this command is allowed and then does an
INQUIRY to get the ciphertext the client should then send the cipher
text.

@example
    S: INQUIRE CIPHERTEXT
    C: D (xxxxxx
    C: D xxxx)
    C: END
@end example

Please note that the server may send status info lines while reading the
data lines from the client.  The data send is a SPKI like S-Exp with
this structure:

@example
     (enc-val
       (<algo>
         (<param_name1> <mpi>)
 	   ...
         (<param_namen> <mpi>)))
@end example

Where algo is a string with the name of the algorithm; see the libgcrypt
documentation for a list of valid algorithms.  The number and names of
the parameters depend on the algorithm.  The agent does return an error
if there is an inconsistency.

If the decryption was successful the decrypted data is returned by
means of "D" lines.

Here is an example session:
@cartouche
@smallexample
   C: PKDECRYPT
   S: INQUIRE CIPHERTEXT
   C: D (enc-val elg (a 349324324)
   C: D    (b 3F444677CA)))
   C: END
   S: # session key follows
   S: S PADDING 0
   S: D (value 1234567890ABCDEF0)
   S: OK decryption successful
@end smallexample
@end cartouche

The “PADDING” status line is only send if gpg-agent can tell what kind
of padding is used.  As of now only the value 0 is used to indicate
that the padding has been removed.


@node Agent PKSIGN
@subsection Signing a Hash

The client asks the agent to sign a given hash value.  A default key
will be chosen if no key has been set.  To set a key a client first
uses:

@example
   SIGKEY <keyGrip>
@end example

This can be used multiple times to create multiple signature, the list
of keys is reset with the next PKSIGN command or a RESET.  The server
tests whether the key is a valid key to sign something and responds with
okay.

@example
   SETHASH --hash=<name>|<algo> <hexstring>
@end example

The client can use this command to tell the server about the data <hexstring>
(which usually is a hash) to be signed. <algo> is the decimal encoded hash
algorithm number as used by Libgcrypt.  Either <algo> or --hash=<name>
must be given.  Valid names for <name> are:

@table @code
@item sha1
The SHA-1 hash algorithm
@item sha256
The SHA-256 hash algorithm
@item rmd160
The RIPE-MD160 hash algorithm
@item md5
The old and broken MD5 hash algorithm
@item tls-md5sha1
A combined hash algorithm as used by the TLS protocol.
@end table

@noindent
The actual signing is done using

@example
   PKSIGN <options>
@end example

Options are not yet defined, but may later be used to choose among
different algorithms.  The agent does then some checks, asks for the
passphrase and as a result the server returns the signature as an SPKI
like S-expression in "D" lines:

@example
     (sig-val
       (<algo>
         (<param_name1> <mpi>)
 	   ...
         (<param_namen> <mpi>)))
@end example


The operation is affected by the option

@example
   OPTION use-cache-for-signing=0|1
@end example

The default of @code{1} uses the cache.  Setting this option to @code{0}
will lead @command{gpg-agent} to ignore the passphrase cache.  Note, that there is
also a global command line option for @command{gpg-agent} to globally disable the
caching.


Here is an example session:
@cartouche
@smallexample
   C: SIGKEY <keyGrip>
   S: OK key available
   C: SIGKEY <keyGrip>
   S: OK key available
   C: PKSIGN
   S: # I did ask the user whether he really wants to sign
   S: # I did ask the user for the passphrase
   S: INQUIRE HASHVAL
   C: D ABCDEF012345678901234
   C: END
   S: # signature follows
   S: D (sig-val rsa (s 45435453654612121212))
   S: OK
@end smallexample
@end cartouche

@node Agent GENKEY
@subsection Generating a Key

This is used to create a new keypair and store the secret key inside the
active PSE --- which is in most cases a Soft-PSE.  A not-yet-defined
option allows choosing the storage location.  To get the secret key out
of the PSE, a special export tool has to be used.

@example
   GENKEY [--no-protection] [--preset] [<cache_nonce>]
@end example

Invokes the key generation process and the server will then inquire
on the generation parameters, like:

@example
   S: INQUIRE KEYPARM
   C: D (genkey (rsa (nbits  1024)))
   C: END
@end example

The format of the key parameters which depends on the algorithm is of
the form:

@example
    (genkey
      (algo
        (parameter_name_1 ....)
          ....
        (parameter_name_n ....)))
@end example

If everything succeeds, the server returns the *public key* in a SPKI
like S-Expression like this:

@example
     (public-key
       (rsa
 	 (n <mpi>)
 	 (e <mpi>)))
@end example

Here is an example session:
@cartouche
@smallexample
   C: GENKEY
   S: INQUIRE KEYPARM
   C: D (genkey (rsa (nbits  1024)))
   C: END
   S: D (public-key
   S: D   (rsa (n 326487324683264) (e 10001)))
   S  OK key created
@end smallexample
@end cartouche

The @option{--no-protection} option may be used to prevent prompting for a
passphrase to protect the secret key while leaving the secret key unprotected.
The @option{--preset} option may be used to add the passphrase to the cache
using the default cache parameters.

The @option{--inq-passwd} option may be used to create the key with a
supplied passphrase.  When used the agent does an inquiry with the
keyword @code{NEWPASSWD} to retrieve that passphrase.  This option
takes precedence over @option{--no-protection}; however if the client
sends a empty (zero-length) passphrase, this is identical to
@option{--no-protection}.

@node Agent IMPORT
@subsection Importing a Secret Key

This operation is not yet supported by GpgAgent.  Specialized tools
are to be used for this.

There is no actual need because we can expect that secret keys
created by a 3rd party are stored on a smartcard.  If we have
generated the key ourselves, we do not need to import it.

@node Agent EXPORT
@subsection Export a Secret Key

Not implemented.

Should be done by an extra tool.

@node Agent ISTRUSTED
@subsection Importing a Root Certificate

Actually we do not import a Root Cert but provide a way to validate
any piece of data by storing its Hash along with a description and
an identifier in the PSE.  Here is the interface description:

@example
    ISTRUSTED <fingerprint>
@end example

Check whether the OpenPGP primary key or the X.509 certificate with the
given fingerprint is an ultimately trusted key or a trusted Root CA
certificate.  The fingerprint should be given as a hexstring (without
any blanks or colons or whatever in between) and may be left padded with
00 in case of an MD5 fingerprint.  GPGAgent will answer with:

@example
    OK
@end example

The key is in the table of trusted keys.

@example
    ERR 304 (Not Trusted)
@end example

The key is not in this table.

Gpg needs the entire list of trusted keys to maintain the web of
trust; the following command is therefore quite helpful:

@example
    LISTTRUSTED
@end example

GpgAgent returns a list of trusted keys line by line:

@example
    S: D 000000001234454556565656677878AF2F1ECCFF P
    S: D 340387563485634856435645634856438576457A P
    S: D FEDC6532453745367FD83474357495743757435D S
    S: OK
@end example

The first item on a line is the hexified fingerprint where MD5
fingerprints are @code{00} padded to the left and the second item is a
flag to indicate the type of key (so that gpg is able to only take care
of PGP keys).  P = OpenPGP, S = S/MIME.  A client should ignore the rest
of the line, so that we can extend the format in the future.

Finally a client should be able to mark a key as trusted:

@example
   MARKTRUSTED @var{fingerprint} "P"|"S"
@end example

The server will then pop up a window to ask the user whether she
really trusts this key. For this it will probably ask for a text to
be displayed like this:

@example
   S: INQUIRE TRUSTDESC
   C: D Do you trust the key with the fingerprint @@FPR@@
   C: D bla fasel blurb.
   C: END
   S: OK
@end example

Known sequences with the pattern @@foo@@ are replaced according to this
table:

@table @code
@item @@FPR16@@
Format the fingerprint according to gpg rules for a v3 keys.
@item @@FPR20@@
Format the fingerprint according to gpg rules for a v4 keys.
@item @@FPR@@
Choose an appropriate format to format the fingerprint.
@item @@@@
Replaced by a single @code{@@}.
@end table

@node Agent GET_PASSPHRASE
@subsection Ask for a passphrase

This function is usually used to ask for a passphrase to be used for
symmetric encryption, but may also be used by programs which need
special handling of passphrases.  This command uses a syntax which helps
clients to use the agent with minimum effort.

@example
  GET_PASSPHRASE [--data] [--check] [--no-ask] [--repeat[=N]] \
                 [--qualitybar] @var{cache_id}                \
                 [@var{error_message} @var{prompt} @var{description}]
@end example

@var{cache_id} is expected to be a string used to identify a cached
passphrase.  Use a @code{X} to bypass the cache.  With no other
arguments the agent returns a cached passphrase or an error.  By
convention either the hexified fingerprint of the key shall be used for
@var{cache_id} or an arbitrary string prefixed with the name of the
calling application and a colon: Like @code{gpg:somestring}.

@var{error_message} is either a single @code{X} for no error message or
a string to be shown as an error message like (e.g. "invalid
passphrase").  Blanks must be percent escaped or replaced by @code{+}'.

@var{prompt} is either a single @code{X} for a default prompt or the
text to be shown as the prompt.  Blanks must be percent escaped or
replaced by @code{+}.

@var{description} is a text shown above the entry field.  Blanks must be
percent escaped or replaced by @code{+}.

The agent either returns with an error or with a OK followed by the hex
encoded passphrase.  Note that the length of the strings is implicitly
limited by the maximum length of a command.  If the option
@option{--data} is used, the passphrase is not returned on the OK line
but by regular data lines; this is the preferred method.

If the option @option{--check} is used, the standard passphrase
constraints checks are applied.  A check is not done if the passphrase
has been found in the cache.

If the option @option{--no-ask} is used and the passphrase is not in the
cache the user will not be asked to enter a passphrase but the error
code @code{GPG_ERR_NO_DATA} is returned.

If the option @option{--qualitybar} is used and a minimum passphrase
length has been configured, a visual indication of the entered
passphrase quality is shown.

@example
  CLEAR_PASSPHRASE @var{cache_id}
@end example

may be used to invalidate the cache entry for a passphrase.  The
function returns with OK even when there is no cached passphrase.



@node Agent CLEAR_PASSPHRASE
@subsection Remove a cached passphrase

Use this command to remove a cached passphrase.

@example
  CLEAR_PASSPHRASE [--mode=normal] <cache_id>
@end example

The @option{--mode=normal} option can be used to clear a @var{cache_id} that
was set by gpg-agent.


@node Agent PRESET_PASSPHRASE
@subsection Set a passphrase for a keygrip

This command adds a passphrase to the cache for the specified @var{keygrip}.

@example
  PRESET_PASSPHRASE [--inquire] <string_or_keygrip> <timeout> [<hexstring>]
@end example

The passphrase is a hexadecimal string when specified. When not specified, the
passphrase will be retrieved from the pinentry module unless the
@option{--inquire} option was specified in which case the passphrase will be
retrieved from the client.

The @var{timeout} parameter keeps the passphrase cached for the specified
number of seconds. A value of @code{-1} means infinite while @code{0} means
the default (currently only a timeout of -1 is allowed, which means to never
expire it).


@node Agent GET_CONFIRMATION
@subsection Ask for confirmation

This command may be used to ask for a simple confirmation by
presenting a text and 2 buttons: Okay and Cancel.

@example
  GET_CONFIRMATION @var{description}
@end example

@var{description}is displayed along with a Okay and Cancel
button. Blanks must be percent escaped or replaced by @code{+}.  A
@code{X} may be used to display confirmation dialog with a default
text.

The agent either returns with an error or with a OK.  Note, that the
length of @var{description} is implicitly limited by the maximum
length of a command.



@node Agent HAVEKEY
@subsection Check whether a key is available

This can be used to see whether a secret key is available.  It does
not return any information on whether the key is somehow protected.

@example
  HAVEKEY @var{keygrips}
@end example

The agent answers either with OK or @code{No_Secret_Key} (208).  The
caller may want to check for other error codes as well.  More than one
keygrip may be given.  In this case the command returns success if at
least one of the keygrips corresponds to an available secret key.


@node Agent LEARN
@subsection Register a smartcard

@example
  LEARN [--send]
@end example

This command is used to register a smartcard.  With the @option{--send}
option given the certificates are sent back.


@node Agent PASSWD
@subsection Change a Passphrase

@example
  PASSWD [--cache-nonce=<c>] [--passwd-nonce=<s>] [--preset] @var{keygrip}
@end example

This command is used to interactively change the passphrase of the key
identified by the hex string @var{keygrip}.  The @option{--preset}
option may be used to add the new passphrase to the cache using the
default cache parameters.


@node Agent UPDATESTARTUPTTY
@subsection Change the standard display

@example
  UPDATESTARTUPTTY
@end example

Set the startup TTY and X-DISPLAY variables to the values of this
session.  This command is useful to direct future pinentry invocations
to another screen.  It is only required because there is no way in the
ssh-agent protocol to convey this information.


@node Agent GETEVENTCOUNTER
@subsection Get the Event Counters

@example
  GETEVENTCOUNTER
@end example

This function return one status line with the current values of the
event counters.  The event counters are useful to avoid polling by
delaying a poll until something has changed.  The values are decimal
numbers in the range @code{0} to @code{UINT_MAX} and wrapping around to
0.  The actual values should not be relied upon; they shall only be used
to detect a change.

The currently defined counters are:
@table @code
@item ANY
Incremented with any change of any of the other counters.
@item KEY
Incremented for added or removed private keys.
@item CARD
Incremented for each change of the card reader's status.
@end table

@node Agent GETINFO
@subsection  Return information about the process

This is a multipurpose function to return a variety of information.

@example
GETINFO @var{what}
@end example

The value of @var{what} specifies the kind of information returned:
@table @code
@item version
Return the version of the program.
@item pid
Return the process id of the process.
@item socket_name
Return the name of the socket used to connect the agent.
@item ssh_socket_name
Return the name of the socket used for SSH connections.  If SSH support
has not been enabled the error @code{GPG_ERR_NO_DATA} will be returned.
@end table

@node Agent OPTION
@subsection Set options for the session

Here is a list of session options which are not yet described with
other commands.  The general syntax for an Assuan option is:

@smallexample
OPTION  @var{key}=@var{value}
@end smallexample

@noindent
Supported @var{key}s are:

@table @code
@item agent-awareness
This may be used to tell gpg-agent of which gpg-agent version the
client is aware of.  gpg-agent uses this information to enable
features which might break older clients.

@item putenv
Change the session's environment to be used for the
Pinentry.  Valid values are:

  @table @code
  @item @var{name}
  Delete envvar @var{name}
  @item @var{name}=
  Set envvar @var{name} to the empty string
  @item @var{name}=@var{value}
  Set envvar @var{name} to the string @var{value}.
  @end table

@item use-cache-for-signing
See Assuan command @code{PKSIGN}.

@item allow-pinentry-notify
This does not need any value.  It is used to enable the
PINENTRY_LAUNCHED inquiry.

@item pinentry-mode
This option is used to change the operation mode of the pinentry.  The
following values are defined:

  @table @code
  @item ask
  This is the default mode which pops up a pinentry as needed.

  @item cancel
  Instead of popping up a pinentry, return the error code
  @code{GPG_ERR_CANCELED}.

  @item error
  Instead of popping up a pinentry, return the error code
  @code{GPG_ERR_NO_PIN_ENTRY}.

  @item loopback
  Use a loopback pinentry.  This fakes a pinentry by using inquiries
  back to the caller to ask for a passphrase.  This option may only be
  set if the agent has been configured for that.
  To disable this feature use @ref{option --no-allow-loopback-pinentry}.
  @end table

@item cache-ttl-opt-preset
This option sets the cache TTL for new entries created by GENKEY and
PASSWD commands when using the @option{--preset} option.  It is not
used a default value is used.

@item s2k-count
Instead of using the standard S2K count (which is computed on the
fly), the given S2K count is used for new keys or when changing the
passphrase of a key.  Values below 65536 are considered to be 0.  This
option is valid for the entire session or until reset to 0.  This
option is useful if the key is later used on boxes which are either
much slower or faster than the actual box.

@item pretend-request-origin
This option switches the connection into a restricted mode which
handles all further commands in the same way as they would be handled
when originating from the extra or browser socket.  Note that this
option is not available in the restricted mode.  Valid values for this
option are:

  @table @code
  @item none
  @itemx local
  This is a NOP and leaves the connection in the standard way.

  @item remote
  Pretend to come from a remote origin in the same way as connections
  from the @option{--extra-socket}.

  @item browser
  Pretend to come from a local web browser in the same way as connections
  from the @option{--browser-socket}.
  @end table

@end table


@mansect see also
@ifset isman
@command{@gpgname}(1),
@command{gpgsm}(1),
@command{gpgconf}(1),
@command{gpg-connect-agent}(1),
@command{scdaemon}(1)
@end ifset
@include see-also-note.texi