go-embedded/embd
go-embedded/embd
1
0
Fork 0
mirror of https://github.com/kidoman/embd synced 2025-07-04 20:37:46 +02:00
Code Issues Releases Wiki Activity

Standalone fork no longer dependant on the original.

Browse source
This commit is contained in:
clinton 2017-05-20 18:36:48 +10:00
parent d3a9b3ff21
commit 9a25ce11c3
72 changed files with 187 additions and 187 deletions
Download patch file Download diff file Expand all files Collapse all files

20
doc.go
View file

@ -22,7 +22,7 @@ called as 1-liners instead of first instantiating a DigitalPin and then writing
To get started a host driver needs to be registered with the top-level embd package. This is
most easily accomplished by doing an "underscore import" on of the sub-packages of embd/host,
e.g., `import _ "github.com/kidoman/embd/host/chip"`. An `Init()` function in the host driver
e.g., `import _ "github.com/cfreeman/embd/host/chip"`. An `Init()` function in the host driver
registers all the individual drivers with embd.
After getting the host driver the next step might be to instantiate a GPIO pin using
@ -38,7 +38,7 @@ This section shows a few choice samples, more are available in the samples folde
Use the LED driver to toggle LEDs on the BBB:
import "github.com/kidoman/embd"
import "github.com/cfreeman/embd"
...
embd.InitLED()
defer embd.CloseLED()
@ -49,7 +49,7 @@ Use the LED driver to toggle LEDs on the BBB:
Even shorter while prototyping:
import "github.com/kidoman/embd"
import "github.com/cfreeman/embd"
...
embd.InitLED()
defer embd.CloseLED()
@ -58,7 +58,7 @@ Even shorter while prototyping:
BBB + PWM:
import "github.com/kidoman/embd"
import "github.com/cfreeman/embd"
...
embd.InitGPIO()
defer embd.CloseGPIO()
@ -70,7 +70,7 @@ BBB + PWM:
Control GPIO pins on the RaspberryPi / BeagleBone Black:
import "github.com/kidoman/embd"
import "github.com/cfreeman/embd"
...
embd.InitGPIO()
defer embd.CloseGPIO()
@ -80,7 +80,7 @@ Control GPIO pins on the RaspberryPi / BeagleBone Black:
Could also do:
import "github.com/kidoman/embd"
import "github.com/cfreeman/embd"
...
embd.InitGPIO()
defer embd.CloseGPIO()
@ -92,8 +92,8 @@ Could also do:
Or read data from the Bosch BMP085 barometric sensor:
import "github.com/kidoman/embd"
import "github.com/kidoman/embd/sensor/bmp085"
import "github.com/cfreeman/embd"
import "github.com/cfreeman/embd/sensor/bmp085"
...
bus := embd.NewI2CBus(1)
...
@ -104,8 +104,8 @@ Or read data from the Bosch BMP085 barometric sensor:
Even find out the heading from the LSM303 magnetometer:
import "github.com/kidoman/embd"
import "github.com/kidoman/embd/sensor/lsm303"
import "github.com/cfreeman/embd"
import "github.com/cfreeman/embd/sensor/lsm303"
...
bus := embd.NewI2CBus(1)
...