gnupg/po/zh_TW.po

8405 lines
233 KiB
Plaintext

# Traditional Chinese(zh-tw) messages for GnuPG
# Copyright (C) 2002 Free Software Foundation, Inc.
# This file is distributed under the same license as the PACKAGE package.
# Jedi Lin <Jedi@Jedi.org>, 2003, 2004, 2005, 2006, 2007, 2008.
#
# Special thanks to "Audrey Tang <audreyt@audreyt.org>".
#
msgid ""
msgstr ""
"Project-Id-Version: gnupg 2.0.8\n"
"Report-Msgid-Bugs-To: translations@gnupg.org\n"
"POT-Creation-Date: 2008-02-15 10:28+0100\n"
"PO-Revision-Date: 2008-01-31 23:09+0800\n"
"Last-Translator: Jedi Lin <Jedi@Jedi.org>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Poedit-Basepath: gnupg-2.0.8/\n"
"X-Poedit-Language: Chinese\n"
"X-Poedit-Country: TAIWAN\n"
"Plural-Forms: nplurals=1; plural=0;\n"
#: agent/call-pinentry.c:223
#, c-format
msgid "failed to acquire the pinentry lock: %s\n"
msgstr "個人識別碼項目鎖定獲取失敗: %s\n"
#: agent/call-pinentry.c:592
msgid ""
"Please enter your PIN, so that the secret key can be unlocked for this "
"session"
msgstr "請輸入你的 PIN 以便在此階段作業中解開密鑰"
#: agent/call-pinentry.c:595
msgid ""
"Please enter your passphrase, so that the secret key can be unlocked for "
"this session"
msgstr "請輸入你的密語以便在此階段作業中解開私鑰"
#. TRANSLATORS: This string is displayed by pinentry as the
#. label for the quality bar.
#: agent/call-pinentry.c:630
msgid "Quality:"
msgstr "品質: %s"
#. TRANSLATORS: This string is a tooltip, shown by pinentry
#. when hovering over the quality bar. Please use an
#. appropriate string to describe what this is about. The
#. length of the tooltip is limited to about 900 characters.
#. If you do not translate this entry, a default english
#. text (see source) will be used.
#: agent/call-pinentry.c:653
msgid "pinentry.qualitybar.tooltip"
msgstr ""
"輸入在上面的文字的品質.\n"
"關於此規範的細節, 請洽你的系統管理者."
#: agent/call-pinentry.c:695
#, c-format
msgid "SETERROR %s (try %d of %d)"
msgstr "設定錯誤 %s (第 %d 次嘗試, 最多 %d 次)"
#: agent/call-pinentry.c:715 agent/call-pinentry.c:727
msgid "PIN too long"
msgstr "PIN 太長"
#: agent/call-pinentry.c:716
msgid "Passphrase too long"
msgstr "密語太長"
#: agent/call-pinentry.c:724
msgid "Invalid characters in PIN"
msgstr "PIN 含有無效的字符"
#: agent/call-pinentry.c:729
msgid "PIN too short"
msgstr "PIN 太短"
#: agent/call-pinentry.c:741
msgid "Bad PIN"
msgstr "不良的 PIN"
#: agent/call-pinentry.c:742
msgid "Bad Passphrase"
msgstr "不良的密語"
#: agent/call-pinentry.c:778
msgid "Passphrase"
msgstr "密語"
#: agent/command-ssh.c:529
#, c-format
msgid "ssh keys greater than %d bits are not supported\n"
msgstr "未支援大於 %d 位元的 ssh 金鑰\n"
#: agent/command-ssh.c:688 g10/exec.c:478 g10/gpg.c:1057 g10/keygen.c:3155
#: g10/keygen.c:3188 g10/keyring.c:1202 g10/keyring.c:1506 g10/openfile.c:275
#: g10/openfile.c:368 g10/sign.c:800 g10/sign.c:1109 g10/tdbio.c:547
#, c-format
msgid "can't create `%s': %s\n"
msgstr "無法建立 `%s': %s\n"
#: agent/command-ssh.c:700 common/helpfile.c:47 g10/card-util.c:682
#: g10/card-util.c:751 g10/dearmor.c:60 g10/dearmor.c:107 g10/decrypt.c:70
#: g10/encode.c:194 g10/encode.c:504 g10/gpg.c:1058 g10/import.c:193
#: g10/keygen.c:2644 g10/keyring.c:1532 g10/openfile.c:192 g10/openfile.c:353
#: g10/plaintext.c:503 g10/sign.c:782 g10/sign.c:977 g10/sign.c:1093
#: g10/sign.c:1249 g10/tdbdump.c:139 g10/tdbdump.c:147 g10/tdbio.c:551
#: g10/tdbio.c:614 g10/verify.c:99 g10/verify.c:162 sm/gpgsm.c:1972
#: sm/gpgsm.c:2009 sm/gpgsm.c:2047 sm/qualified.c:66
#, c-format
msgid "can't open `%s': %s\n"
msgstr "無法開啟 `%s': %s\n"
#: agent/command-ssh.c:1615 agent/command-ssh.c:1633
#, c-format
msgid "error getting serial number of card: %s\n"
msgstr "取得此卡片序號時出錯: %s\n"
#: agent/command-ssh.c:1619
#, c-format
msgid "detected card with S/N: %s\n"
msgstr "偵測到卡片, 其序號為: %s\n"
#: agent/command-ssh.c:1624
#, c-format
msgid "error getting default authentication keyID of card: %s\n"
msgstr "取得此卡片的預設認證金鑰 ID 時出錯: %s\n"
#: agent/command-ssh.c:1644
#, c-format
msgid "no suitable card key found: %s\n"
msgstr "找不到合適的卡片金鑰: %s\n"
#: agent/command-ssh.c:1694
#, c-format
msgid "shadowing the key failed: %s\n"
msgstr "遮蔽金鑰時失敗: %s\n"
#: agent/command-ssh.c:1709
#, c-format
msgid "error writing key: %s\n"
msgstr "寫入金鑰時出錯: %s\n"
#: agent/command-ssh.c:2014
#, c-format
msgid "Please enter the passphrase for the ssh key%0A %c"
msgstr "請輸入此 ssh 金鑰的密語%0A %c"
#: agent/command-ssh.c:2342 agent/genkey.c:308 agent/genkey.c:430
#: agent/protect-tool.c:1197
msgid "Please re-enter this passphrase"
msgstr "請再次輸入密語"
#: agent/command-ssh.c:2363
#, c-format
msgid ""
"Please enter a passphrase to protect the received secret key%%0A %s%%"
"0Awithin gpg-agent's key storage"
msgstr "請輸入密語以保護收到的私鑰%%0A %s%%0A於 gpg-agent 的金鑰存放處"
#: agent/command-ssh.c:2401 agent/genkey.c:338 agent/genkey.c:461
#: agent/protect-tool.c:1203 tools/symcryptrun.c:434
msgid "does not match - try again"
msgstr "前後不一致 - 請再試一次"
#: agent/command-ssh.c:2885
#, c-format
msgid "failed to create stream from socket: %s\n"
msgstr "從 socket 建立串流失敗: %s\n"
#: agent/divert-scd.c:217
msgid "Admin PIN"
msgstr "管理者 PIN"
#: agent/divert-scd.c:275
msgid "Repeat this PIN"
msgstr "請再次輸入 PIN"
#: agent/divert-scd.c:278
msgid "PIN not correctly repeated; try again"
msgstr "前後兩次輸入的 PIN 不一致; 請再試一次"
#: agent/divert-scd.c:290
#, c-format
msgid "Please enter the PIN%s%s%s to unlock the card"
msgstr "請輸入 PIN%s%s%s 以解開卡片"
#: agent/genkey.c:106 sm/certreqgen-ui.c:284 sm/export.c:628 sm/export.c:644
#: sm/import.c:525 sm/import.c:550
#, c-format
msgid "error creating temporary file: %s\n"
msgstr "建立暫存檔時出錯: %s\n"
#: agent/genkey.c:113 sm/export.c:635 sm/import.c:533
#, c-format
msgid "error writing to temporary file: %s\n"
msgstr "寫入暫存檔時出錯: %s\n"
#: agent/genkey.c:151 agent/genkey.c:157
msgid "Enter new passphrase"
msgstr "請輸入新密語"
#: agent/genkey.c:165
msgid "Take this one anyway"
msgstr "無論如何還是要用這個"
#: agent/genkey.c:191
#, c-format
msgid ""
"Warning: You have entered an insecure passphrase.%%0AA passphrase should be "
"at least %u character long."
msgid_plural ""
"Warning: You have entered an insecure passphrase.%%0AA passphrase should be "
"at least %u characters long."
msgstr[0] "警告: 你輸入了不安全的密語.%%0A密語至少得要有 %u 個字符長."
#: agent/genkey.c:212
#, c-format
msgid ""
"Warning: You have entered an insecure passphrase.%%0AA passphrase should "
"contain at least %u digit or%%0Aspecial character."
msgid_plural ""
"Warning: You have entered an insecure passphrase.%%0AA passphrase should "
"contain at least %u digits or%%0Aspecial characters."
msgstr[0] ""
"警告: 你輸入了不安全的密語.%%0A密語至少得要含有 %u 個數字或特別字符."
#: agent/genkey.c:235
#, c-format
msgid ""
"Warning: You have entered an insecure passphrase.%%0AA passphrase may not be "
"a known term or match%%0Acertain pattern."
msgstr ""
"警告: 你輸入了不安全的密語.%%0A密語不得含有已知的詞彙, 亦不得與確知的樣式吻"
"合."
#: agent/genkey.c:251
#, c-format
msgid ""
"You have not entered a passphrase!%0AAn empty passphrase is not allowed."
msgstr "你還沒有輸入密語!%0A空密語是不行的."
#: agent/genkey.c:253
#, c-format
msgid ""
"You have not entered a passphrase - this is in general a bad idea!%0APlease "
"confirm that you do not want to have any protection on your key."
msgstr ""
"你還沒有輸入密語 - 通常這可不是個好主意!%0A請確認你不想要對你的金鑰做任何保"
"護."
#: agent/genkey.c:262
msgid "Yes, protection is not needed"
msgstr "是, 不需要任何保護"
#: agent/genkey.c:306
#, c-format
msgid "Please enter the passphrase to%0Ato protect your new key"
msgstr "請輸入密語至%0A以保護你的新金鑰"
#: agent/genkey.c:429
msgid "Please enter the new passphrase"
msgstr "請輸入新的密語"
#: agent/gpg-agent.c:117 agent/preset-passphrase.c:72 agent/protect-tool.c:109
#: scd/scdaemon.c:101 tools/gpg-check-pattern.c:70
msgid ""
"@Options:\n"
" "
msgstr ""
"@選項:\n"
" "
#: agent/gpg-agent.c:119 scd/scdaemon.c:103
msgid "run in server mode (foreground)"
msgstr "以伺服器模式執行 (前景)"
#: agent/gpg-agent.c:120 scd/scdaemon.c:106
msgid "run in daemon mode (background)"
msgstr "以服務模式執行 (背景)"
#: agent/gpg-agent.c:121 g10/gpg.c:468 g10/gpgv.c:70 kbx/kbxutil.c:88
#: scd/scdaemon.c:107 sm/gpgsm.c:343 tools/gpg-connect-agent.c:66
#: tools/gpgconf.c:72 tools/symcryptrun.c:164
msgid "verbose"
msgstr "囉唆模式"
#: agent/gpg-agent.c:122 g10/gpgv.c:71 kbx/kbxutil.c:89 scd/scdaemon.c:108
#: sm/gpgsm.c:344
msgid "be somewhat more quiet"
msgstr "盡量安靜些"
#: agent/gpg-agent.c:123 scd/scdaemon.c:109
msgid "sh-style command output"
msgstr "sh 樣式的指令輸出"
#: agent/gpg-agent.c:124 scd/scdaemon.c:110
msgid "csh-style command output"
msgstr "csh 樣式的指令輸出"
#: agent/gpg-agent.c:125 tools/symcryptrun.c:167
msgid "|FILE|read options from FILE"
msgstr "|檔案|從「檔案」中讀取選項"
#: agent/gpg-agent.c:130 scd/scdaemon.c:119
msgid "do not detach from the console"
msgstr "不要從 console 分離"
#: agent/gpg-agent.c:131
msgid "do not grab keyboard and mouse"
msgstr "不要奪取鍵盤及滑鼠"
#: agent/gpg-agent.c:132 scd/scdaemon.c:120 tools/symcryptrun.c:166
msgid "use a log file for the server"
msgstr "為伺服器使用日誌檔"
#: agent/gpg-agent.c:134
msgid "use a standard location for the socket"
msgstr "為 socket 使用標準的位置"
#: agent/gpg-agent.c:137
msgid "|PGM|use PGM as the PIN-Entry program"
msgstr "|PGM|使用 PGM 做為 PIN-Entry 程式"
#: agent/gpg-agent.c:140
msgid "|PGM|use PGM as the SCdaemon program"
msgstr "|PGM|使用 PGM 做為 SCdaemon 程式"
#: agent/gpg-agent.c:141
msgid "do not use the SCdaemon"
msgstr "不要使用 SCdaemon"
#: agent/gpg-agent.c:150
msgid "ignore requests to change the TTY"
msgstr "忽略變更 TTY 的要求"
#: agent/gpg-agent.c:152
msgid "ignore requests to change the X display"
msgstr "忽略變更 X display 的要求"
#: agent/gpg-agent.c:155
msgid "|N|expire cached PINs after N seconds"
msgstr "|N|讓快取住的 PIN 在 N 秒後到期"
#: agent/gpg-agent.c:168
msgid "do not use the PIN cache when signing"
msgstr "簽署時不要使用 PIN 快取"
#: agent/gpg-agent.c:170
msgid "allow clients to mark keys as \"trusted\""
msgstr "允許用戶端將金鑰標記為 \"已信任\""
#: agent/gpg-agent.c:172
msgid "allow presetting passphrase"
msgstr "允許預先設定密語"
#: agent/gpg-agent.c:173
msgid "enable ssh-agent emulation"
msgstr "啟用 ssh-agent 模擬"
#: agent/gpg-agent.c:175
msgid "|FILE|write environment settings also to FILE"
msgstr "|檔案|將環境設定也寫至「檔案」"
#: agent/gpg-agent.c:283 agent/preset-passphrase.c:94 agent/protect-tool.c:146
#: scd/scdaemon.c:207 sm/gpgsm.c:572 tools/gpg-connect-agent.c:171
#: tools/gpgconf.c:94 tools/symcryptrun.c:204 tools/gpg-check-pattern.c:141
msgid "Please report bugs to <"
msgstr "翻譯瑕疵請回報給 <Jedi@Jedi.org>, 程式瑕疵則請回報給 <"
#: agent/gpg-agent.c:286
msgid "Usage: gpg-agent [options] (-h for help)"
msgstr "用法: gpg-agent [選項] (或用 -h 求助)"
#: agent/gpg-agent.c:288
msgid ""
"Syntax: gpg-agent [options] [command [args]]\n"
"Secret key management for GnuPG\n"
msgstr ""
"語法: gpg-agent [選項] [指令 [引數]]\n"
"GnuPG 私鑰管理\n"
#: agent/gpg-agent.c:323 g10/gpg.c:964 scd/scdaemon.c:247 sm/gpgsm.c:734
#, c-format
msgid "invalid debug-level `%s' given\n"
msgstr "給定的除錯等級 `%s' 無效\n"
#: agent/gpg-agent.c:522 agent/protect-tool.c:1066 kbx/kbxutil.c:428
#: scd/scdaemon.c:342 sm/gpgsm.c:878 sm/gpgsm.c:881 tools/symcryptrun.c:997
#: tools/gpg-check-pattern.c:178
#, c-format
msgid "%s is too old (need %s, have %s)\n"
msgstr "%s 太舊了 (需要 %s, 但是祇有 %s)\n"
#: agent/gpg-agent.c:621 g10/gpg.c:2057 scd/scdaemon.c:423 sm/gpgsm.c:969
#, c-format
msgid "NOTE: no default option file `%s'\n"
msgstr "請注意: 沒有預設選項檔 `%s'\n"
#: agent/gpg-agent.c:626 agent/gpg-agent.c:1206 g10/gpg.c:2061
#: scd/scdaemon.c:428 sm/gpgsm.c:973 tools/symcryptrun.c:930
#, c-format
msgid "option file `%s': %s\n"
msgstr "選項檔 `%s': %s\n"
#: agent/gpg-agent.c:634 g10/gpg.c:2068 scd/scdaemon.c:436 sm/gpgsm.c:980
#, c-format
msgid "reading options from `%s'\n"
msgstr "從 `%s' 讀取選項中\n"
#: agent/gpg-agent.c:966 g10/plaintext.c:140 g10/plaintext.c:145
#: g10/plaintext.c:162
#, c-format
msgid "error creating `%s': %s\n"
msgstr "建立 `%s' 時出錯: %s\n"
#: agent/gpg-agent.c:1298 agent/gpg-agent.c:1420 agent/gpg-agent.c:1424
#: agent/gpg-agent.c:1465 agent/gpg-agent.c:1469 g10/exec.c:172
#: g10/openfile.c:429 scd/scdaemon.c:923
#, c-format
msgid "can't create directory `%s': %s\n"
msgstr "無法建立目錄 `%s': %s\n"
#: agent/gpg-agent.c:1312 scd/scdaemon.c:937
msgid "name of socket too long\n"
msgstr "socket 名稱太長\n"
#: agent/gpg-agent.c:1337 scd/scdaemon.c:960
#, c-format
msgid "can't create socket: %s\n"
msgstr "無法建立 socket: %s\n"
#: agent/gpg-agent.c:1346
#, c-format
msgid "socket name `%s' is too long\n"
msgstr "socket 名稱 `%s' 太長\n"
#: agent/gpg-agent.c:1366
msgid "a gpg-agent is already running - not starting a new one\n"
msgstr "已經有一份 gpg-agent 在執行了 - 不會再啟動一份新的\n"
#: agent/gpg-agent.c:1377 scd/scdaemon.c:980
msgid "error getting nonce for the socket\n"
msgstr "為 socket 取得 nonce 時出錯\n"
#: agent/gpg-agent.c:1382 scd/scdaemon.c:983
#, c-format
msgid "error binding socket to `%s': %s\n"
msgstr "綁定 socket 至 `%s' 時出錯: %s\n"
#: agent/gpg-agent.c:1394 scd/scdaemon.c:992
#, c-format
msgid "listen() failed: %s\n"
msgstr "listen() 失敗: %s\n"
#: agent/gpg-agent.c:1400 scd/scdaemon.c:999
#, c-format
msgid "listening on socket `%s'\n"
msgstr "正在候聽 socket `%s'\n"
#: agent/gpg-agent.c:1428 agent/gpg-agent.c:1475 g10/openfile.c:432
#, c-format
msgid "directory `%s' created\n"
msgstr "`%s' 目錄已建立\n"
#: agent/gpg-agent.c:1481
#, c-format
msgid "stat() failed for `%s': %s\n"
msgstr "stat() 失敗於 `%s': %s\n"
#: agent/gpg-agent.c:1485
#, c-format
msgid "can't use `%s' as home directory\n"
msgstr "無法使用 `%s' 做為家目錄\n"
#: agent/gpg-agent.c:1602 scd/scdaemon.c:1015
#, c-format
msgid "error reading nonce on fd %d: %s\n"
msgstr "於 fd %d 讀取 nonce 時出錯: %s\n"
#: agent/gpg-agent.c:1624
#, c-format
msgid "handler 0x%lx for fd %d started\n"
msgstr "經手程式 0x%lx (用於 fd %d) 已啟動\n"
#: agent/gpg-agent.c:1629
#, c-format
msgid "handler 0x%lx for fd %d terminated\n"
msgstr "經手程式 0x%lx (用於 fd %d) 已終止\n"
#: agent/gpg-agent.c:1649
#, c-format
msgid "ssh handler 0x%lx for fd %d started\n"
msgstr "ssh 經手程式 0x%lx (用於 fd %d) 已啟動\n"
#: agent/gpg-agent.c:1654
#, c-format
msgid "ssh handler 0x%lx for fd %d terminated\n"
msgstr "ssh 經手程式 0x%lx (用於 fd %d) 已終止\n"
#: agent/gpg-agent.c:1771 scd/scdaemon.c:1137
#, c-format
msgid "pth_select failed: %s - waiting 1s\n"
msgstr "pth_select 失敗: %s - 等 1 秒鐘\n"
#: agent/gpg-agent.c:1884 scd/scdaemon.c:1204
#, c-format
msgid "%s %s stopped\n"
msgstr "%s %s 已停止\n"
#: agent/gpg-agent.c:1907
msgid "no gpg-agent running in this session\n"
msgstr "在此階段中沒有執行中的 gpg-agent\n"
#: agent/gpg-agent.c:1918 common/simple-pwquery.c:329 common/asshelp.c:324
#: tools/gpg-connect-agent.c:1953
msgid "malformed GPG_AGENT_INFO environment variable\n"
msgstr "被變造的 GPG_AGENT_INFO 環境變數\n"
#: agent/gpg-agent.c:1931 common/simple-pwquery.c:341 common/asshelp.c:336
#: tools/gpg-connect-agent.c:1964
#, c-format
msgid "gpg-agent protocol version %d is not supported\n"
msgstr "gpg-agent 協定版本 %d 未被支援\n"
#: agent/preset-passphrase.c:98
msgid "Usage: gpg-preset-passphrase [options] KEYGRIP (-h for help)\n"
msgstr "用法: gpg-preset-passphrase [選項] 金鑰鑰柄 (或用 -h 求助)\n"
#: agent/preset-passphrase.c:101
msgid ""
"Syntax: gpg-preset-passphrase [options] KEYGRIP\n"
"Password cache maintenance\n"
msgstr ""
"語法: gpg-preset-passphrase [選項] 金鑰鑰柄\n"
"密碼快取維護\n"
#: agent/protect-tool.c:149
msgid "Usage: gpg-protect-tool [options] (-h for help)\n"
msgstr "用法: gpg-protect-tool [選項] (或用 -h 求助)\n"
#: agent/protect-tool.c:151
msgid ""
"Syntax: gpg-protect-tool [options] [args]\n"
"Secret key maintenance tool\n"
msgstr ""
"語法: gpg-protect-tool [選項] [引數]\n"
"私鑰維護工具\n"
#: agent/protect-tool.c:1188
msgid "Please enter the passphrase to unprotect the PKCS#12 object."
msgstr "請輸入密語來取消 PKCS#12 物件的保護."
#: agent/protect-tool.c:1191
msgid "Please enter the passphrase to protect the new PKCS#12 object."
msgstr "請輸入密語來保護新的 PKCS#12 物件."
#: agent/protect-tool.c:1194
msgid ""
"Please enter the passphrase to protect the imported object within the GnuPG "
"system."
msgstr "請輸入密語以保護匯入至 GnuPG 系統內的物件."
#: agent/protect-tool.c:1199
msgid ""
"Please enter the passphrase or the PIN\n"
"needed to complete this operation."
msgstr ""
"請輸入完成這項操作所需的\n"
"密語或 PIN."
#: agent/protect-tool.c:1204 tools/symcryptrun.c:435
msgid "Passphrase:"
msgstr "密語:"
#: agent/protect-tool.c:1212 tools/symcryptrun.c:442
#, c-format
msgid "error while asking for the passphrase: %s\n"
msgstr "詢問密語時出錯: %s\n"
#: agent/protect-tool.c:1215 tools/symcryptrun.c:446
msgid "cancelled\n"
msgstr "已取消\n"
#: agent/trustlist.c:132 agent/trustlist.c:322
#, c-format
msgid "error opening `%s': %s\n"
msgstr "開啟 `%s' 時出錯: %s\n"
#: agent/trustlist.c:147 common/helpfile.c:63 common/helpfile.c:79
#, c-format
msgid "file `%s', line %d: %s\n"
msgstr "檔案 `%s', 第 %d 列: %s\n"
#: agent/trustlist.c:167 agent/trustlist.c:175
#, c-format
msgid "statement \"%s\" ignored in `%s', line %d\n"
msgstr "命令 \"%s\" 忽略於 `%s', 第 %d 列\n"
#: agent/trustlist.c:181
#, c-format
msgid "system trustlist `%s' not available\n"
msgstr "沒有系統信任清單 `%s' 可用\n"
#: agent/trustlist.c:216
#, c-format
msgid "bad fingerprint in `%s', line %d\n"
msgstr "不良的指紋於 `%s', 第 %d 列\n"
#: agent/trustlist.c:242 agent/trustlist.c:249
#, c-format
msgid "invalid keyflag in `%s', line %d\n"
msgstr "無效的金鑰旗標於 `%s', 第 %d 列\n"
#: agent/trustlist.c:283 common/helpfile.c:126
#, c-format
msgid "error reading `%s', line %d: %s\n"
msgstr "讀取 `%s' 時出錯, 第 %d 列: %s\n"
#: agent/trustlist.c:384 agent/trustlist.c:431
msgid "error reading list of trusted root certificates\n"
msgstr "讀取已信任根憑證清單時出錯\n"
#. TRANSLATORS: This prompt is shown by the Pinentry
#. and has one special property: A "%%0A" is used by
#. Pinentry to insert a line break. The double
#. percent sign is actually needed because it is also
#. a printf format string. If you need to insert a
#. plain % sign, you need to encode it as "%%25". The
#. second "%s" gets replaced by a hexdecimal
#. fingerprint string whereas the first one receives
#. the name as stored in the certificate.
#: agent/trustlist.c:539
#, c-format
msgid ""
"Please verify that the certificate identified as:%%0A \"%s\"%%0Ahas the "
"fingerprint:%%0A %s"
msgstr "請驗證憑證與此完全相同:%%0A \"%s\"%%0A其指紋為:%%0A %s"
#. TRANSLATORS: "Correct" is the label of a button and intended to
#. be hit if the fingerprint matches the one of the CA. The other
#. button is "the default "Cancel" of the Pinentry.
#: agent/trustlist.c:551
msgid "Correct"
msgstr "正確"
#. TRANSLATORS: This prompt is shown by the Pinentry
#. and has one special property: A "%%0A" is used by
#. Pinentry to insert a line break. The double
#. percent sign is actually needed because it is also
#. a printf format string. If you need to insert a
#. plain % sign, you need to encode it as "%%25". The
#. "%s" gets replaced by the name as store in the
#. certificate.
#: agent/trustlist.c:574
#, c-format
msgid ""
"Do you ultimately trust%%0A \"%s\"%%0Ato correctly certify user "
"certificates?"
msgstr "請問你是否徹底信任%%0A \"%s\"%%0A正確驗證使用者憑證的能力?"
#: agent/trustlist.c:583
msgid "Yes"
msgstr "Yes"
#: agent/trustlist.c:583
msgid "No"
msgstr "No"
#: agent/findkey.c:158
#, c-format
msgid "Note: This passphrase has never been changed.%0APlease change it now."
msgstr "請注意: 密語從未變更過.%0A請現在就變更."
#: agent/findkey.c:174
#, c-format
msgid ""
"This passphrase has not been changed%%0Asince %.4s-%.2s-%.2s. Please change "
"it now."
msgstr "密語從下列時刻起就沒有變更過:%%0A%.4s-%.2s-%.2s. 請現在就變更."
#: agent/findkey.c:188 agent/findkey.c:195
msgid "Change passphrase"
msgstr "更改密語"
#: agent/findkey.c:196
msgid "I'll change it later"
msgstr "我稍後再變更"
#: common/exechelp.c:378 common/exechelp.c:467 tools/gpgconf-comp.c:1338
#: tools/gpgconf-comp.c:1661
#, c-format
msgid "error creating a pipe: %s\n"
msgstr "建立管道時出錯: %s\n"
#: common/exechelp.c:443 common/exechelp.c:500
#, c-format
msgid "can't fdopen pipe for reading: %s\n"
msgstr "無法將管道打開流以讀取: %s\n"
#: common/exechelp.c:479 common/exechelp.c:607 common/exechelp.c:842
#, c-format
msgid "error forking process: %s\n"
msgstr "衍生執行程序時出錯: %s\n"
#: common/exechelp.c:653 common/exechelp.c:706
#, c-format
msgid "waiting for process %d to terminate failed: %s\n"
msgstr "等候 %d 處理程序終止時失敗: %s\n"
#: common/exechelp.c:661
#, c-format
msgid "error getting exit code of process %d: %s\n"
msgstr "取得 %d 執行程序結束碼時出錯: %s\n"
#: common/exechelp.c:667 common/exechelp.c:717
#, c-format
msgid "error running `%s': exit status %d\n"
msgstr "執行 `%s' 時出錯: 結束狀態 %d\n"
#: common/exechelp.c:712
#, c-format
msgid "error running `%s': probably not installed\n"
msgstr "執行 `%s' 時出錯: 可能尚未安裝\n"
#: common/exechelp.c:725
#, c-format
msgid "error running `%s': terminated\n"
msgstr "執行 `%s' 時出錯: 已終止\n"
#: common/http.c:1625
#, c-format
msgid "error creating socket: %s\n"
msgstr "建立 socket 時出錯: %s\n"
#: common/http.c:1669
msgid "host not found"
msgstr "找不到主機"
#: common/simple-pwquery.c:315
msgid "gpg-agent is not available in this session\n"
msgstr "gpg-agent 在此階段無法使用\n"
#: common/simple-pwquery.c:373
#, c-format
msgid "can't connect to `%s': %s\n"
msgstr "無法連接至 `%s': %s\n"
#: common/simple-pwquery.c:384
msgid "communication problem with gpg-agent\n"
msgstr "與 gpg-agent 的溝通問題\n"
#: common/simple-pwquery.c:394
msgid "problem setting the gpg-agent options\n"
msgstr "設定 gpg-agent 選項時發生問題\n"
#: common/simple-pwquery.c:557 common/simple-pwquery.c:653
msgid "canceled by user\n"
msgstr "由使用者取消\n"
#: common/simple-pwquery.c:572 common/simple-pwquery.c:659
msgid "problem with the agent\n"
msgstr "代理程式的問題\n"
#: common/sysutils.c:105
#, c-format
msgid "can't disable core dumps: %s\n"
msgstr "無法讓系統停止傾印核心檔: %s\n"
#: common/sysutils.c:200
#, c-format
msgid "Warning: unsafe ownership on %s \"%s\"\n"
msgstr "警告: %s 的所有權 \"%s\" 並不安全\n"
#: common/sysutils.c:232
#, c-format
msgid "Warning: unsafe permissions on %s \"%s\"\n"
msgstr "警告: %s 的權限 \"%s\" 並不安全\n"
#. TRANSLATORS: See doc/TRANSLATE about this string.
#: common/yesno.c:31 common/yesno.c:68
msgid "yes"
msgstr "yes"
#: common/yesno.c:32 common/yesno.c:73
msgid "yY"
msgstr "yY"
#. TRANSLATORS: See doc/TRANSLATE about this string.
#: common/yesno.c:34 common/yesno.c:70
msgid "no"
msgstr "no"
#: common/yesno.c:35 common/yesno.c:74
msgid "nN"
msgstr "nN"
#. TRANSLATORS: See doc/TRANSLATE about this string.
#: common/yesno.c:72
msgid "quit"
msgstr "quit"
#: common/yesno.c:75
msgid "qQ"
msgstr "qQ"
#. TRANSLATORS: See doc/TRANSLATE about this string.
#: common/yesno.c:109
msgid "okay|okay"
msgstr "okay|okay"
#. TRANSLATORS: See doc/TRANSLATE about this string.
#: common/yesno.c:111
msgid "cancel|cancel"
msgstr "cancel|cancel"
#: common/yesno.c:112
msgid "oO"
msgstr "oO"
#: common/yesno.c:113
msgid "cC"
msgstr "cC"
#: common/miscellaneous.c:71
#, c-format
msgid "out of core in secure memory while allocating %lu bytes"
msgstr "在安全記憶體配置 %lu 位元組時超出核心"
#: common/miscellaneous.c:74
#, c-format
msgid "out of core while allocating %lu bytes"
msgstr "配置 %lu 位元組時超出核心"
#: common/asshelp.c:242
msgid "no running gpg-agent - starting one\n"
msgstr "沒有執行中的 gpg-agent - 正在啟動一份\n"
#: common/asshelp.c:347
msgid "can't connect to the agent - trying fall back\n"
msgstr "無法連線至代理程式 - 正試著退回\n"
#: common/audit.c:682
msgid "Certificate chain available"
msgstr "有可用的憑證鏈"
#: common/audit.c:689
msgid "root certificate missing"
msgstr "根憑證遺失"
#: common/audit.c:715
msgid "Data encryption succeeded"
msgstr "資料已加密成功"
#: common/audit.c:720 common/audit.c:781 common/audit.c:801 common/audit.c:825
msgid "Data available"
msgstr "有可用的資料"
#: common/audit.c:723
msgid "Session key created"
msgstr "階段金鑰已建立"
#: common/audit.c:728
#, c-format
msgid "algorithm: %s"
msgstr "演算法: %s"
#: common/audit.c:730 common/audit.c:732
#, c-format
msgid "unsupported algorithm: %s"
msgstr "未支援的演算法: %s"
#: common/audit.c:734
msgid "seems to be not encrypted"
msgstr "看起來未加密"
#: common/audit.c:740
msgid "Number of recipients"
msgstr "收件者數量"
#: common/audit.c:748
#, c-format
msgid "Recipient %d"
msgstr "收件者 %d"
#: common/audit.c:776
msgid "Data signing succeeded"
msgstr "資料已簽署成功"
#: common/audit.c:796
msgid "Data decryption succeeded"
msgstr "資料已解密成功"
#: common/audit.c:821
msgid "Data verification succeeded"
msgstr "資料驗證成功"
#: common/audit.c:830
msgid "Signature available"
msgstr "有可用的簽章"
#: common/audit.c:835
msgid "Parsing signature succeeded"
msgstr "剖析簽章成功"
#: common/audit.c:840
#, c-format
msgid "Bad hash algorithm: %s"
msgstr "不良的雜湊演算法: %s"
#: common/audit.c:855
#, c-format
msgid "Signature %d"
msgstr "簽章 %d"
#: common/audit.c:871
msgid "Certificate chain valid"
msgstr "憑證鏈有效"
#: common/audit.c:882
msgid "Root certificate trustworthy"
msgstr "根憑證可信賴"
#: common/audit.c:892
msgid "CRL/OCSP check of certificates"
msgstr "CRL/OCSP 憑證檢查"
#: common/audit.c:909
msgid "Included certificates"
msgstr "包含在內的憑證"
#: common/audit.c:968
msgid "No audit log entries."
msgstr "沒有稽核日誌項目."
#: common/audit.c:1017
msgid "Unknown operation"
msgstr "未知的操作"
#: common/audit.c:1035
msgid "Gpg-Agent usable"
msgstr "Gpg-Agent 可以使用"
#: common/audit.c:1045
msgid "Dirmngr usable"
msgstr "Dirmngr 可以使用"
#: common/audit.c:1081
#, c-format
msgid "No help available for `%s'."
msgstr "`%s' 沒有可用的說明."
#: common/helpfile.c:80
msgid "ignoring garbage line"
msgstr "忽略垃圾列"
#: g10/armor.c:379
#, c-format
msgid "armor: %s\n"
msgstr "封裝: %s\n"
#: g10/armor.c:418
msgid "invalid armor header: "
msgstr "無效的封裝檔頭: "
#: g10/armor.c:429
msgid "armor header: "
msgstr "封裝檔頭: "
#: g10/armor.c:442
msgid "invalid clearsig header\n"
msgstr "無效的明文簽章檔頭\n"
#: g10/armor.c:455
msgid "unknown armor header: "
msgstr "未知的封裝檔頭: "
#: g10/armor.c:508
msgid "nested clear text signatures\n"
msgstr "多層明文簽章\n"
#: g10/armor.c:643
msgid "unexpected armor: "
msgstr "未預期的封裝: "
#: g10/armor.c:655
msgid "invalid dash escaped line: "
msgstr "無效的破折號逸出列: "
#: g10/armor.c:809 g10/armor.c:1419
#, c-format
msgid "invalid radix64 character %02X skipped\n"
msgstr "無效的 64 進位字符 %02x 已跳過\n"
#: g10/armor.c:852
msgid "premature eof (no CRC)\n"
msgstr "檔案未預期的結束 (沒有 CRC 的部分)\n"
#: g10/armor.c:886
msgid "premature eof (in CRC)\n"
msgstr "檔案未預期的結束 (CRC 的部分未結束)\n"
#: g10/armor.c:894
msgid "malformed CRC\n"
msgstr "CRC 被變造過\n"
#: g10/armor.c:898 g10/armor.c:1456
#, c-format
msgid "CRC error; %06lX - %06lX\n"
msgstr "CRC 錯誤; %06lX - %06lX\n"
#: g10/armor.c:918
msgid "premature eof (in trailer)\n"
msgstr "檔案未預期的結束 (於結尾處)\n"
#: g10/armor.c:922
msgid "error in trailer line\n"
msgstr "結尾列有問題\n"
#: g10/armor.c:1233
msgid "no valid OpenPGP data found.\n"
msgstr "找不到有效的 OpenPGP 資料.\n"
#: g10/armor.c:1238
#, c-format
msgid "invalid armor: line longer than %d characters\n"
msgstr "無效的封裝: 列長超出 %d 字符\n"
#: g10/armor.c:1242
msgid ""
"quoted printable character in armor - probably a buggy MTA has been used\n"
msgstr "封裝裡出現被引號括住的可列印字符 - 可能是有瑕疵的送信程式造成的\n"
#: g10/build-packet.c:976
msgid ""
"a notation name must have only printable characters or spaces, and end with "
"an '='\n"
msgstr "標記名稱一定要採用可印出的字符或空白, 並以一個 '=' 來結尾\n"
#: g10/build-packet.c:988
msgid "a user notation name must contain the '@' character\n"
msgstr "使用者標記名稱一定要含有 '@' 字符\n"
#: g10/build-packet.c:994
msgid "a notation name must not contain more than one '@' character\n"
msgstr "使用者標記名稱不得含有兩個或更多的 '@' 字符\n"
#: g10/build-packet.c:1012
msgid "a notation value must not use any control characters\n"
msgstr "標記值一定不能使用任何的控制字符\n"
#: g10/build-packet.c:1046 g10/build-packet.c:1055
msgid "WARNING: invalid notation data found\n"
msgstr "警告: 找到無效的標記資料\n"
#: g10/build-packet.c:1077 g10/build-packet.c:1079
msgid "not human readable"
msgstr "不是人類能讀得懂的"
#: g10/card-util.c:62 g10/card-util.c:310
#, c-format
msgid "OpenPGP card not available: %s\n"
msgstr "沒有可用的 OpenPGP 卡片: %s\n"
#: g10/card-util.c:67
#, c-format
msgid "OpenPGP card no. %s detected\n"
msgstr "偵測到 OpenPGP 卡片編號 %s\n"
#: g10/card-util.c:75 g10/card-util.c:1396 g10/delkey.c:126 g10/keyedit.c:1529
#: g10/keygen.c:2831 g10/revoke.c:216 g10/revoke.c:455
msgid "can't do this in batch mode\n"
msgstr "無法在批次模式中這樣做\n"
#: g10/card-util.c:102 g10/card-util.c:1129 g10/card-util.c:1208
#: g10/keyedit.c:424 g10/keyedit.c:445 g10/keyedit.c:459 g10/keygen.c:1591
#: g10/keygen.c:1658 sm/certreqgen-ui.c:128 sm/certreqgen-ui.c:182
msgid "Your selection? "
msgstr "你要選哪一個? "
#: g10/card-util.c:220 g10/card-util.c:270
msgid "[not set]"
msgstr "[未設定]"
#: g10/card-util.c:417
msgid "male"
msgstr "男性"
#: g10/card-util.c:418
msgid "female"
msgstr "女性"
#: g10/card-util.c:418
msgid "unspecified"
msgstr "未特定"
#: g10/card-util.c:445
msgid "not forced"
msgstr "不強迫使用"
#: g10/card-util.c:445
msgid "forced"
msgstr "強迫使用"
#: g10/card-util.c:523
msgid "Error: Only plain ASCII is currently allowed.\n"
msgstr "錯誤: 目前祇允許使用單純的 ASCII 字符.\n"
#: g10/card-util.c:525
msgid "Error: The \"<\" character may not be used.\n"
msgstr "錯誤: 不能使用 \"<\" 字符.\n"
#: g10/card-util.c:527
msgid "Error: Double spaces are not allowed.\n"
msgstr "錯誤: 並不允許使用連續兩個以上的空格.\n"
#: g10/card-util.c:544
msgid "Cardholder's surname: "
msgstr "卡片持有者的姓氏: "
#: g10/card-util.c:546
msgid "Cardholder's given name: "
msgstr "卡片持有者的名字: "
#: g10/card-util.c:564
#, c-format
msgid "Error: Combined name too long (limit is %d characters).\n"
msgstr "錯誤: 合併後的名字太長 (上限是 %d 個字符).\n"
#: g10/card-util.c:585
msgid "URL to retrieve public key: "
msgstr "取回公鑰的 URL: "
#: g10/card-util.c:593
#, c-format
msgid "Error: URL too long (limit is %d characters).\n"
msgstr "錯誤: URL 太長 (上限是 %d 個字符).\n"
#: g10/card-util.c:691 g10/card-util.c:760 g10/import.c:283
#, c-format
msgid "error reading `%s': %s\n"
msgstr "讀取 `%s' 時出錯: %s\n"
#: g10/card-util.c:699
msgid "Login data (account name): "
msgstr "登入資料 (帳號名稱): "
#: g10/card-util.c:709
#, c-format
msgid "Error: Login data too long (limit is %d characters).\n"
msgstr "錯誤: 登入資料太長 (上限是 %d 個字符).\n"
#: g10/card-util.c:768
msgid "Private DO data: "
msgstr "私人的 DO 資料: "
#: g10/card-util.c:778
#, c-format
msgid "Error: Private DO too long (limit is %d characters).\n"
msgstr "錯誤: 私人的 DO 太長 (上限是 %d 個字符).\n"
#: g10/card-util.c:798
msgid "Language preferences: "
msgstr "介面語言偏好設定: "
#: g10/card-util.c:806
msgid "Error: invalid length of preference string.\n"
msgstr "錯誤: 無效的偏好設定字串長度\n"
#: g10/card-util.c:815
msgid "Error: invalid characters in preference string.\n"
msgstr "錯誤: 偏好設定字串中含有無效的字符\n"
#: g10/card-util.c:836
msgid "Sex ((M)ale, (F)emale or space): "
msgstr "性別 ((M)男性, (F)女性或留空): "
#: g10/card-util.c:850
msgid "Error: invalid response.\n"
msgstr "錯誤: 無效的回應.\n"
#: g10/card-util.c:871
msgid "CA fingerprint: "
msgstr "憑證中心 (CA) 指紋: "
#: g10/card-util.c:894
msgid "Error: invalid formatted fingerprint.\n"
msgstr "錯誤: 無效的格式化指紋.\n"
#: g10/card-util.c:942
#, c-format
msgid "key operation not possible: %s\n"
msgstr "不可能進行金鑰操作: %s\n"
#: g10/card-util.c:943
msgid "not an OpenPGP card"
msgstr "這不是 OpenPGP 卡片"
#: g10/card-util.c:952
#, c-format
msgid "error getting current key info: %s\n"
msgstr "取得現用金鑰資訊時出錯: %s\n"
#: g10/card-util.c:1036
msgid "Replace existing key? (y/N) "
msgstr "是否要取代既有的金鑰? (y/N) "
#: g10/card-util.c:1056 g10/card-util.c:1065
msgid "Make off-card backup of encryption key? (Y/n) "
msgstr "是否要為加密用金鑰建立卡外備份? (Y/n) "
#: g10/card-util.c:1077
msgid "Replace existing keys? (y/N) "
msgstr "是否要取代既有的金鑰? (y/N) "
#: g10/card-util.c:1086
#, c-format
msgid ""
"Please note that the factory settings of the PINs are\n"
" PIN = `%s' Admin PIN = `%s'\n"
"You should change them using the command --change-pin\n"
msgstr ""
"請注意 PIN 的出廠設定值為\n"
" PIN = `%s' 管理者 PIN = `%s'\n"
"你應該用 --change-pin 指令來加以變更\n"
#: g10/card-util.c:1120
msgid "Please select the type of key to generate:\n"
msgstr "請選擇你要產生的金鑰種類:\n"
#: g10/card-util.c:1122 g10/card-util.c:1199
msgid " (1) Signature key\n"
msgstr " (1) 簽署用金鑰\n"
#: g10/card-util.c:1123 g10/card-util.c:1201
msgid " (2) Encryption key\n"
msgstr " (2) 加密用金鑰\n"
#: g10/card-util.c:1124 g10/card-util.c:1203
msgid " (3) Authentication key\n"
msgstr " (3) 憑證用金鑰\n"
#: g10/card-util.c:1140 g10/card-util.c:1219 g10/keyedit.c:945
#: g10/keygen.c:1595 g10/keygen.c:1623 g10/keygen.c:1697 g10/revoke.c:685
msgid "Invalid selection.\n"
msgstr "無效的選擇.\n"
#: g10/card-util.c:1196
msgid "Please select where to store the key:\n"
msgstr "請選擇要把金鑰存放在哪裡:\n"
#: g10/card-util.c:1231
msgid "unknown key protection algorithm\n"
msgstr "未知的金鑰保護演算法\n"
#: g10/card-util.c:1236
msgid "secret parts of key are not available\n"
msgstr "私鑰部分無法取用\n"
#: g10/card-util.c:1241
msgid "secret key already stored on a card\n"
msgstr "私鑰已經存放在卡片上了\n"
#: g10/card-util.c:1309 g10/keyedit.c:1362
msgid "quit this menu"
msgstr "離開這個選單"
#: g10/card-util.c:1311
msgid "show admin commands"
msgstr "顯示管理者指令"
#: g10/card-util.c:1312 g10/keyedit.c:1365
msgid "show this help"
msgstr "顯示這份線上說明"
#: g10/card-util.c:1314
msgid "list all available data"
msgstr "列出所有可用的資料"
#: g10/card-util.c:1317
msgid "change card holder's name"
msgstr "變更卡片持有人的名字"
#: g10/card-util.c:1318
msgid "change URL to retrieve key"
msgstr "變更取回金鑰的 URL"
#: g10/card-util.c:1319
msgid "fetch the key specified in the card URL"
msgstr "從卡片 URL 取回指定的金鑰"
#: g10/card-util.c:1320
msgid "change the login name"
msgstr "變更登入名稱"
#: g10/card-util.c:1321
msgid "change the language preferences"
msgstr "變更介面語言偏好設定"
#: g10/card-util.c:1322
msgid "change card holder's sex"
msgstr "變更卡片持有者的性別"
#: g10/card-util.c:1323
msgid "change a CA fingerprint"
msgstr "變更某個憑證中心 (CA) 的指紋"
#: g10/card-util.c:1324
msgid "toggle the signature force PIN flag"
msgstr "切換簽章是否強制使用 PIN 的旗標"
#: g10/card-util.c:1325
msgid "generate new keys"
msgstr "產生新的金鑰"
#: g10/card-util.c:1326
msgid "menu to change or unblock the PIN"
msgstr "變更或解凍 PIN 的選單"
#: g10/card-util.c:1327
msgid "verify the PIN and list all data"
msgstr "驗證 PIN 並列出所有的資料"
#: g10/card-util.c:1447 g10/keyedit.c:1634
msgid "Command> "
msgstr "指令> "
#: g10/card-util.c:1485
msgid "Admin-only command\n"
msgstr "限管理者使用的指令\n"
#: g10/card-util.c:1516
msgid "Admin commands are allowed\n"
msgstr "允許使用管理者指令\n"
#: g10/card-util.c:1518
msgid "Admin commands are not allowed\n"
msgstr "未允許使用管理者指令\n"
#: g10/card-util.c:1592 g10/keyedit.c:2255
msgid "Invalid command (try \"help\")\n"
msgstr "無效的指令 (試試看 \"help\")\n"
#: g10/decrypt.c:110 g10/encode.c:876
msgid "--output doesn't work for this command\n"
msgstr "--output 在這個指令中沒有作用\n"
#: g10/decrypt.c:166 g10/gpg.c:3926 g10/keyring.c:376 g10/keyring.c:663
#, c-format
msgid "can't open `%s'\n"
msgstr "無法開啟 `%s'\n"
#: g10/delkey.c:73 g10/export.c:324 g10/keyedit.c:3402 g10/keyserver.c:1719
#: g10/revoke.c:226
#, c-format
msgid "key \"%s\" not found: %s\n"
msgstr "找不到金鑰 \"%s\": %s\n"
#: g10/delkey.c:81 g10/export.c:354 g10/import.c:2368 g10/keyserver.c:1733
#: g10/revoke.c:232 g10/revoke.c:477
#, c-format
msgid "error reading keyblock: %s\n"
msgstr "讀取金鑰區塊時出錯: %s\n"
#: g10/delkey.c:127 g10/delkey.c:134
msgid "(unless you specify the key by fingerprint)\n"
msgstr "(除非你用指紋指定了金鑰)\n"
#: g10/delkey.c:133
msgid "can't do this in batch mode without \"--yes\"\n"
msgstr "沒有 \"--yes\" 就沒辦法在批次模式中這麼做\n"
#: g10/delkey.c:145
msgid "Delete this key from the keyring? (y/N) "
msgstr "要從鑰匙圈裡刪除這把金鑰嗎? (y/N) "
#: g10/delkey.c:153
msgid "This is a secret key! - really delete? (y/N) "
msgstr "這是一把私鑰! - 真的要刪除嗎? (y/N) "
#: g10/delkey.c:163
#, c-format
msgid "deleting keyblock failed: %s\n"
msgstr "刪除金鑰區塊時失敗: %s\n"
#: g10/delkey.c:173
msgid "ownertrust information cleared\n"
msgstr "主觀信任資訊已清除\n"
#: g10/delkey.c:204
#, c-format
msgid "there is a secret key for public key \"%s\"!\n"
msgstr "公鑰 \"%s\" 有相對應的私鑰!\n"
#: g10/delkey.c:206
msgid "use option \"--delete-secret-keys\" to delete it first.\n"
msgstr "請先以 \"--delete-secret-keys\" 選項來刪除它.\n"
#: g10/encode.c:226 g10/sign.c:1268
#, c-format
msgid "error creating passphrase: %s\n"
msgstr "建立密語時出錯: %s\n"
#: g10/encode.c:232
msgid "can't use a symmetric ESK packet due to the S2K mode\n"
msgstr "因處於 S2K 模式下而無法使用對稱式 ESK 封包\n"
#: g10/encode.c:246
#, c-format
msgid "using cipher %s\n"
msgstr "正在使用 %s 編密法\n"
#: g10/encode.c:256 g10/encode.c:577
#, c-format
msgid "`%s' already compressed\n"
msgstr "`%s' 已經被壓縮了\n"
#: g10/encode.c:311 g10/encode.c:611 g10/sign.c:563
#, c-format
msgid "WARNING: `%s' is an empty file\n"
msgstr "警告: `%s' 是個空檔案\n"
#: g10/encode.c:485
msgid "you can only encrypt to RSA keys of 2048 bits or less in --pgp2 mode\n"
msgstr "在 --pgp2 模式中, 你祇能以 2048 位元以下的 RSA 金鑰加密\n"
#: g10/encode.c:510
#, c-format
msgid "reading from `%s'\n"
msgstr "正在從 `%s' 讀取中\n"
#: g10/encode.c:541
msgid ""
"unable to use the IDEA cipher for all of the keys you are encrypting to.\n"
msgstr "你正要用來加密的所有金鑰都不能使用 IDEA 編密法.\n"
#: g10/encode.c:559
#, c-format
msgid ""
"WARNING: forcing symmetric cipher %s (%d) violates recipient preferences\n"
msgstr "警告: 強迫使用 %s (%d) 對稱式編密法會違反收件者偏好設定\n"
#: g10/encode.c:655 g10/sign.c:938
#, c-format
msgid ""
"WARNING: forcing compression algorithm %s (%d) violates recipient "
"preferences\n"
msgstr "警告: 強迫使用 %s (%d) 壓縮演算法會違反收件者偏好設定\n"
#: g10/encode.c:751
#, c-format
msgid "forcing symmetric cipher %s (%d) violates recipient preferences\n"
msgstr "強迫使用 %s (%d) 對稱式編密法會違反收件者偏好設定\n"
#: g10/encode.c:821 g10/pkclist.c:813 g10/pkclist.c:861
#, c-format
msgid "you may not use %s while in %s mode\n"
msgstr "你不能夠將 %s 用於 %s 模式中\n"
#: g10/encode.c:848
#, c-format
msgid "%s/%s encrypted for: \"%s\"\n"
msgstr "%s/%s 已加密給: \"%s\"\n"
#: g10/encr-data.c:92 g10/mainproc.c:286
#, c-format
msgid "%s encrypted data\n"
msgstr "%s 已加密的資料\n"
#: g10/encr-data.c:95 g10/mainproc.c:290
#, c-format
msgid "encrypted with unknown algorithm %d\n"
msgstr "以 %d 未知演算法所加密\n"
#: g10/encr-data.c:133 sm/decrypt.c:126
msgid ""
"WARNING: message was encrypted with a weak key in the symmetric cipher.\n"
msgstr "警告: 訊息已用對稱式編密法的弱金鑰加密了.\n"
#: g10/encr-data.c:145
msgid "problem handling encrypted packet\n"
msgstr "處理已加密封包有問題\n"
#: g10/exec.c:49
msgid "no remote program execution supported\n"
msgstr "沒有支援的遠端程式執行\n"
#: g10/exec.c:313
msgid ""
"external program calls are disabled due to unsafe options file permissions\n"
msgstr "因為不安全的檔案權限選項, 而禁用了外部程式叫用\n"
#: g10/exec.c:343
msgid "this platform requires temporary files when calling external programs\n"
msgstr "在這個作業平台上叫用外部程式時需要暫存檔\n"
#: g10/exec.c:421
#, c-format
msgid "unable to execute program `%s': %s\n"
msgstr "無法執行程式 `%s': %s\n"
#: g10/exec.c:424
#, c-format
msgid "unable to execute shell `%s': %s\n"
msgstr "無法執行 shell `%s': %s\n"
#: g10/exec.c:509
#, c-format
msgid "system error while calling external program: %s\n"
msgstr "叫用外部程式時發生系統錯誤: %s\n"
#: g10/exec.c:520 g10/exec.c:586
msgid "unnatural exit of external program\n"
msgstr "外部程式不自然地離開\n"
#: g10/exec.c:535
msgid "unable to execute external program\n"
msgstr "無法執行外部程式\n"
#: g10/exec.c:552
#, c-format
msgid "unable to read external program response: %s\n"
msgstr "無法讀取外部程式回應: %s\n"
#: g10/exec.c:597 g10/exec.c:604
#, c-format
msgid "WARNING: unable to remove tempfile (%s) `%s': %s\n"
msgstr "警告: 無法移除暫存檔 (%s) `%s': %s\n"
#: g10/exec.c:609
#, c-format
msgid "WARNING: unable to remove temp directory `%s': %s\n"
msgstr "警告: 無法移除暫存目錄 `%s': %s\n"
#: g10/export.c:61
msgid "export signatures that are marked as local-only"
msgstr "匯出標記為僅限本機使用的簽章"
#: g10/export.c:63
msgid "export attribute user IDs (generally photo IDs)"
msgstr "匯出署名使用者 ID (通常是照片 ID)"
#: g10/export.c:65
msgid "export revocation keys marked as \"sensitive\""
msgstr "匯出標記為 \"機密\" 的撤銷金鑰"
#: g10/export.c:67
msgid "remove the passphrase from exported subkeys"
msgstr "從匯出所得的子鑰中移除密語"
#: g10/export.c:69
msgid "remove unusable parts from key during export"
msgstr "匯出時從金鑰中移除無法使用的部分"
#: g10/export.c:71
msgid "remove as much as possible from key during export"
msgstr "匯出時盡可能地從金鑰中移除"
#: g10/export.c:73
msgid "export keys in an S-expression based format"
msgstr "匯出金鑰成以 S-expression 為基礎的格式"
#: g10/export.c:338
msgid "exporting secret keys not allowed\n"
msgstr "不允許匯出私鑰\n"
#: g10/export.c:367
#, c-format
msgid "key %s: not protected - skipped\n"
msgstr "金鑰 %s: 未受保護 - 已跳過\n"
#: g10/export.c:375
#, c-format
msgid "key %s: PGP 2.x style key - skipped\n"
msgstr "金鑰 %s: PGP 2.x 型態的金鑰 - 已跳過\n"
#: g10/export.c:386
#, c-format
msgid "key %s: key material on-card - skipped\n"
msgstr "金鑰 %s: 金鑰資料在卡片上 - 已跳過\n"
#: g10/export.c:537
msgid "about to export an unprotected subkey\n"
msgstr "正要匯出未受保護的子鑰\n"
#: g10/export.c:560
#, c-format
msgid "failed to unprotect the subkey: %s\n"
msgstr "解除子鑰保護失敗: %s\n"
# I hope this warning doesn't confuse people.
#: g10/export.c:584
#, c-format
msgid "WARNING: secret key %s does not have a simple SK checksum\n"
msgstr "警告: 私鑰 %s 並沒有任的何單一 SK 加總檢查\n"
#: g10/export.c:633
msgid "WARNING: nothing exported\n"
msgstr "警告: 沒有匯出任何東西\n"
#: g10/getkey.c:151
msgid "too many entries in pk cache - disabled\n"
msgstr "pk 快取裡有太多項目 - 已禁用\n"
#: g10/getkey.c:174
msgid "[User ID not found]"
msgstr "[找不到使用者 ID]"
#: g10/getkey.c:951 g10/getkey.c:961 g10/getkey.c:971 g10/getkey.c:987
#: g10/getkey.c:1002
#, c-format
msgid "automatically retrieved `%s' via %s\n"
msgstr "已自動取回 `%s' (經由 %s )\n"
#: g10/getkey.c:1834
#, c-format
msgid "Invalid key %s made valid by --allow-non-selfsigned-uid\n"
msgstr "無效的金鑰 %s 可以藉由 --allow-non-selfsigned-uid 而生效\n"
#: g10/getkey.c:2391 g10/keyedit.c:3727
#, c-format
msgid "no secret subkey for public subkey %s - ignoring\n"
msgstr "公鑰 %s 沒有相對應的私鑰 - 正在忽略\n"
#: g10/getkey.c:2622
#, c-format
msgid "using subkey %s instead of primary key %s\n"
msgstr "使用子鑰 %s 來替換主鑰 %s\n"
#: g10/getkey.c:2669
#, c-format
msgid "key %s: secret key without public key - skipped\n"
msgstr "金鑰 %s: 祇有私鑰而沒有公鑰 - 已跳過\n"
#: g10/gpg.c:367 kbx/kbxutil.c:71 sm/gpgsm.c:245 tools/gpgconf.c:56
msgid ""
"@Commands:\n"
" "
msgstr ""
"@指令:\n"
" "
#: g10/gpg.c:369
msgid "|[file]|make a signature"
msgstr "|[檔案]|建立簽章"
#: g10/gpg.c:370
msgid "|[file]|make a clear text signature"
msgstr "|[檔案]|建立明文簽章"
#: g10/gpg.c:371 sm/gpgsm.c:249
msgid "make a detached signature"
msgstr "建立分離式簽章"
#: g10/gpg.c:372 sm/gpgsm.c:250
msgid "encrypt data"
msgstr "加密資料"
#: g10/gpg.c:374 sm/gpgsm.c:251
msgid "encryption only with symmetric cipher"
msgstr "僅使用對稱式編密法來加密"
#: g10/gpg.c:376 sm/gpgsm.c:252
msgid "decrypt data (default)"
msgstr "資料解密 (預設)"
#: g10/gpg.c:378 sm/gpgsm.c:253
msgid "verify a signature"
msgstr "驗證簽章"
#: g10/gpg.c:380 sm/gpgsm.c:255
msgid "list keys"
msgstr "列出金鑰"
#: g10/gpg.c:382
msgid "list keys and signatures"
msgstr "列出金鑰和簽章"
#: g10/gpg.c:383
msgid "list and check key signatures"
msgstr "列出並檢查金鑰簽章"
#: g10/gpg.c:384 sm/gpgsm.c:259
msgid "list keys and fingerprints"
msgstr "列出金鑰和指紋"
#: g10/gpg.c:385 sm/gpgsm.c:257
msgid "list secret keys"
msgstr "列出私鑰"
#: g10/gpg.c:386
msgid "generate a new key pair"
msgstr "產生新的金鑰對"
#: g10/gpg.c:387
msgid "remove keys from the public keyring"
msgstr "從公鑰鑰匙圈裡移除金鑰"
#: g10/gpg.c:389
msgid "remove keys from the secret keyring"
msgstr "從私鑰鑰匙圈裡移除金鑰"
#: g10/gpg.c:390
msgid "sign a key"
msgstr "簽署金鑰"
#: g10/gpg.c:391
msgid "sign a key locally"
msgstr "僅在本機簽署金鑰"
#: g10/gpg.c:392
msgid "sign or edit a key"
msgstr "簽署或編輯金鑰"
#: g10/gpg.c:393
msgid "generate a revocation certificate"
msgstr "產生撤銷憑證"
#: g10/gpg.c:395
msgid "export keys"
msgstr "匯出金鑰"
#: g10/gpg.c:396 sm/gpgsm.c:262
msgid "export keys to a key server"
msgstr "把金鑰匯出至金鑰伺服器"
#: g10/gpg.c:397 sm/gpgsm.c:263
msgid "import keys from a key server"
msgstr "從金鑰伺服器匯入金鑰"
#: g10/gpg.c:399
msgid "search for keys on a key server"
msgstr "在金鑰伺服器上搜尋金鑰"
#: g10/gpg.c:401
msgid "update all keys from a keyserver"
msgstr "從金鑰伺服器更新所有的金鑰"
#: g10/gpg.c:405
msgid "import/merge keys"
msgstr "匯入/合併金鑰"
#: g10/gpg.c:408
msgid "print the card status"
msgstr "列印卡片狀態"
#: g10/gpg.c:409
msgid "change data on a card"
msgstr "變更卡片上的資料"
#: g10/gpg.c:410
msgid "change a card's PIN"
msgstr "變更卡片的 PIN"
#: g10/gpg.c:419
msgid "update the trust database"
msgstr "更新信任資料庫"
#: g10/gpg.c:426
msgid "|algo [files]|print message digests"
msgstr "|演算法 [檔案]|印出訊息摘要"
#: g10/gpg.c:429 sm/gpgsm.c:267
msgid "run in server mode"
msgstr "以伺服器模式執行"
#: g10/gpg.c:431 g10/gpgv.c:68 kbx/kbxutil.c:81 sm/gpgsm.c:282
#: tools/gpg-connect-agent.c:64 tools/gpgconf.c:69 tools/symcryptrun.c:157
msgid ""
"@\n"
"Options:\n"
" "
msgstr ""
"@\n"
"選項:\n"
" "
#: g10/gpg.c:433 sm/gpgsm.c:284
msgid "create ascii armored output"
msgstr "建立以 ASCII 封裝過的輸出"
#: g10/gpg.c:435 sm/gpgsm.c:296
msgid "|NAME|encrypt for NAME"
msgstr "|名字|以「名字」作為加密對象"
#: g10/gpg.c:446 sm/gpgsm.c:334
msgid "use this user-id to sign or decrypt"
msgstr "拿這個使用者 ID 來簽署或解密"
#: g10/gpg.c:447 sm/gpgsm.c:337
msgid "|N|set compress level N (0 disables)"
msgstr "|N|設定壓縮等級為 N (0 表示不壓縮)"
#: g10/gpg.c:452 sm/gpgsm.c:339
msgid "use canonical text mode"
msgstr "使用標準的文字模式"
#: g10/gpg.c:466 sm/gpgsm.c:342
msgid "|FILE|write output to FILE"
msgstr "|檔案|將輸出寫入至「檔案」"
#: g10/gpg.c:479 kbx/kbxutil.c:90 sm/gpgsm.c:353 tools/gpgconf.c:74
msgid "do not make any changes"
msgstr "不要做任何改變"
#: g10/gpg.c:480
msgid "prompt before overwriting"
msgstr "覆寫前先詢問"
#: g10/gpg.c:523
msgid "use strict OpenPGP behavior"
msgstr "使用嚴謹的 OpenPGP 行為"
#: g10/gpg.c:524
msgid "generate PGP 2.x compatible messages"
msgstr "產生 PGP 2.x 相容性訊息"
#: g10/gpg.c:553 sm/gpgsm.c:402
msgid ""
"@\n"
"(See the man page for a complete listing of all commands and options)\n"
msgstr ""
"@\n"
"(請參照線上說明頁面來取得所有命令和選項的完整清單)\n"
#: g10/gpg.c:556 sm/gpgsm.c:405
msgid ""
"@\n"
"Examples:\n"
"\n"
" -se -r Bob [file] sign and encrypt for user Bob\n"
" --clearsign [file] make a clear text signature\n"
" --detach-sign [file] make a detached signature\n"
" --list-keys [names] show keys\n"
" --fingerprint [names] show fingerprints\n"
msgstr ""
"@\n"
"範例:\n"
"\n"
" -se -r Bob [檔案] 對 Bob 這個使用者簽署及加密\n"
" --clearsign [檔案] 做出明文簽章\n"
" --detach-sign [檔案] 做出分離式簽章\n"
" --list-keys [名字] 顯示金鑰\n"
" --fingerprint [名字] 顯示指紋\n"
#: g10/gpg.c:753 g10/gpgv.c:95
msgid "Please report bugs to <gnupg-bugs@gnu.org>.\n"
msgstr ""
"請向 <gnupg-bugs@gnu.org> 回報程式瑕疵, 向 <Jedi@Jedi.org> 回報翻譯瑕疵.\n"
#: g10/gpg.c:770
msgid "Usage: gpg [options] [files] (-h for help)"
msgstr "用法: gpg [選項] [檔案] (或用 -h 求助)"
#: g10/gpg.c:773
msgid ""
"Syntax: gpg [options] [files]\n"
"sign, check, encrypt or decrypt\n"
"default operation depends on the input data\n"
msgstr ""
"語法: gpg [選項] [檔案]\n"
"簽署, 檢查, 加密或解密\n"
"預設的操作會依輸入資料而定\n"
#: g10/gpg.c:784 sm/gpgsm.c:585
msgid ""
"\n"
"Supported algorithms:\n"
msgstr ""
"\n"
"已支援的演算法:\n"
#: g10/gpg.c:787
msgid "Pubkey: "
msgstr "公鑰: "
#: g10/gpg.c:794 g10/keyedit.c:2321
msgid "Cipher: "
msgstr "編密法: "
#: g10/gpg.c:801
msgid "Hash: "
msgstr "雜湊: "
#: g10/gpg.c:808 g10/keyedit.c:2366
msgid "Compression: "
msgstr "壓縮: "
#: g10/gpg.c:815 sm/gpgsm.c:605
msgid "Used libraries:"
msgstr "已使用的函示庫:"
#: g10/gpg.c:923
msgid "usage: gpg [options] "
msgstr "用法: gpg [選項] "
#: g10/gpg.c:1093 sm/gpgsm.c:770
msgid "conflicting commands\n"
msgstr "指令彼此矛盾\n"
#: g10/gpg.c:1111
#, c-format
msgid "no = sign found in group definition `%s'\n"
msgstr "在群組定義 `%s' 裡找不到 = 記號\n"
#: g10/gpg.c:1308
#, c-format
msgid "WARNING: unsafe ownership on homedir `%s'\n"
msgstr "警告: 家目錄 `%s' 的所有權並不安全\n"
#: g10/gpg.c:1311
#, c-format
msgid "WARNING: unsafe ownership on configuration file `%s'\n"
msgstr "警告: 組態檔案 `%s' 的所有權並不安全\n"
#: g10/gpg.c:1314
#, c-format
msgid "WARNING: unsafe ownership on extension `%s'\n"
msgstr "警告: 延伸模組 `%s' 的所有權並不安全\n"
#: g10/gpg.c:1320
#, c-format
msgid "WARNING: unsafe permissions on homedir `%s'\n"
msgstr "警告: 家目錄 `%s' 的權限並不安全\n"
#: g10/gpg.c:1323
#, c-format
msgid "WARNING: unsafe permissions on configuration file `%s'\n"
msgstr "警告: 組態檔案 `%s' 的權限並不安全\n"
#: g10/gpg.c:1326
#, c-format
msgid "WARNING: unsafe permissions on extension `%s'\n"
msgstr "警告: 延伸模組 `%s' 的權限並不安全\n"
#: g10/gpg.c:1332
#, c-format
msgid "WARNING: unsafe enclosing directory ownership on homedir `%s'\n"
msgstr "警告: 家目錄 `%s' 的封入目錄所有權並不安全\n"
#: g10/gpg.c:1335
#, c-format
msgid ""
"WARNING: unsafe enclosing directory ownership on configuration file `%s'\n"
msgstr "警告: 組態檔案 `%s' 的封入目錄所有權並不安全\n"
#: g10/gpg.c:1338
#, c-format
msgid "WARNING: unsafe enclosing directory ownership on extension `%s'\n"
msgstr "警告: 延伸模組 `%s' 的封入目錄所有權並不安全\n"
#: g10/gpg.c:1344
#, c-format
msgid "WARNING: unsafe enclosing directory permissions on homedir `%s'\n"
msgstr "警告: 家目錄 `%s' 的封入目錄權限並不安全\n"
#: g10/gpg.c:1347
#, c-format
msgid ""
"WARNING: unsafe enclosing directory permissions on configuration file `%s'\n"
msgstr "警告: 組態檔案 `%s' 的封入目錄權限並不安全\n"
#: g10/gpg.c:1350
#, c-format
msgid "WARNING: unsafe enclosing directory permissions on extension `%s'\n"
msgstr "警告: 延伸模組 `%s' 的封入目錄權限並不安全\n"
#: g10/gpg.c:1529
#, c-format
msgid "unknown configuration item `%s'\n"
msgstr "未知的組態項目 `%s'\n"
#: g10/gpg.c:1624
msgid "display photo IDs during key listings"
msgstr "列出金鑰時顯示照片 ID"
#: g10/gpg.c:1626
msgid "show policy URLs during signature listings"
msgstr "列出簽章時顯示原則 URL"
#: g10/gpg.c:1628
msgid "show all notations during signature listings"
msgstr "列出簽章時顯示所有的註記"
#: g10/gpg.c:1630
msgid "show IETF standard notations during signature listings"
msgstr "列出簽章時顯示 IETF 標準註記"
#: g10/gpg.c:1634
msgid "show user-supplied notations during signature listings"
msgstr "列出簽章時顯示使用者提供的註記"
#: g10/gpg.c:1636
msgid "show preferred keyserver URLs during signature listings"
msgstr "列出簽章時顯示偏好的金鑰伺服器 URL"
#: g10/gpg.c:1638
msgid "show user ID validity during key listings"
msgstr "列出金鑰時顯示使用者 ID 有效性"
#: g10/gpg.c:1640
msgid "show revoked and expired user IDs in key listings"
msgstr "列出金鑰時顯示已撤銷或過期的使用者 ID"
#: g10/gpg.c:1642
msgid "show revoked and expired subkeys in key listings"
msgstr "列出金鑰時顯示已撤銷或過期的子鑰"
#: g10/gpg.c:1644
msgid "show the keyring name in key listings"
msgstr "在金鑰清單中顯示鑰匙圈名稱"
#: g10/gpg.c:1646
msgid "show expiration dates during signature listings"
msgstr "列出簽章時顯示有效期限"
#: g10/gpg.c:1805
#, c-format
msgid "NOTE: old default options file `%s' ignored\n"
msgstr "請注意: 已忽略舊有的預設選項檔 `%s'\n"
#: g10/gpg.c:1896
#, c-format
msgid "libgcrypt is too old (need %s, have %s)\n"
msgstr "libgcrypt 太舊了 (需要 %s, 但是祇有 %s)\n"
#: g10/gpg.c:2275 g10/gpg.c:2950 g10/gpg.c:2962
#, c-format
msgid "NOTE: %s is not for normal use!\n"
msgstr "請注意: 一般情況下不會用到 %s!\n"
#: g10/gpg.c:2456 g10/gpg.c:2468
#, c-format
msgid "`%s' is not a valid signature expiration\n"
msgstr "`%s' 不是個有效的簽章使用期限\n"
#: g10/gpg.c:2550
#, c-format
msgid "`%s' is not a valid character set\n"
msgstr "`%s' 不是個有效的字元集\n"
#: g10/gpg.c:2573 g10/gpg.c:2768 g10/keyedit.c:4085
msgid "could not parse keyserver URL\n"
msgstr "無法剖析金鑰伺服器 URL\n"
#: g10/gpg.c:2585
#, c-format
msgid "%s:%d: invalid keyserver options\n"
msgstr "%s:%d: 無效的金鑰伺服器選項\n"
#: g10/gpg.c:2588
msgid "invalid keyserver options\n"
msgstr "無效的金鑰伺服器選項\n"
#: g10/gpg.c:2595
#, c-format
msgid "%s:%d: invalid import options\n"
msgstr "%s:%d: 無效的匯入選項\n"
#: g10/gpg.c:2598
msgid "invalid import options\n"
msgstr "無效的匯入選項\n"
#: g10/gpg.c:2605
#, c-format
msgid "%s:%d: invalid export options\n"
msgstr "%s:%d: 無效的匯出選項\n"
#: g10/gpg.c:2608
msgid "invalid export options\n"
msgstr "無效的匯出選項\n"
#: g10/gpg.c:2615
#, c-format
msgid "%s:%d: invalid list options\n"
msgstr "%s:%d: 無效的清單選項\n"
#: g10/gpg.c:2618
msgid "invalid list options\n"
msgstr "無效的清單選項\n"
#: g10/gpg.c:2626
msgid "display photo IDs during signature verification"
msgstr "驗證簽章時顯示照片 ID"
#: g10/gpg.c:2628
msgid "show policy URLs during signature verification"
msgstr "驗證簽章時顯示原則 URL"
#: g10/gpg.c:2630
msgid "show all notations during signature verification"
msgstr "驗證簽章時顯示所有的註記"
#: g10/gpg.c:2632
msgid "show IETF standard notations during signature verification"
msgstr "驗證簽章時顯示 IETF 標準註記"
#: g10/gpg.c:2636
msgid "show user-supplied notations during signature verification"
msgstr "驗證簽章時顯示使用者提供的註記"
#: g10/gpg.c:2638
msgid "show preferred keyserver URLs during signature verification"
msgstr "驗證簽章時顯示偏好的金鑰伺服器 URL"
#: g10/gpg.c:2640
msgid "show user ID validity during signature verification"
msgstr "驗證簽章時顯示使用者 ID 有效性"
#: g10/gpg.c:2642
msgid "show revoked and expired user IDs in signature verification"
msgstr "驗證簽章時顯示已撤銷或過期的使用者 ID"
#: g10/gpg.c:2644
msgid "show only the primary user ID in signature verification"
msgstr "驗證簽章時祇顯示主要的使用者 ID"
#: g10/gpg.c:2646
msgid "validate signatures with PKA data"
msgstr "以 PKA 資料驗證簽章"
#: g10/gpg.c:2648
msgid "elevate the trust of signatures with valid PKA data"
msgstr "提高對持有有效 PKA 資料之簽章的信任"
#: g10/gpg.c:2655
#, c-format
msgid "%s:%d: invalid verify options\n"
msgstr "%s:%d: 無效的驗證選項\n"
#: g10/gpg.c:2658
msgid "invalid verify options\n"
msgstr "無效的驗證選項\n"
#: g10/gpg.c:2665
#, c-format
msgid "unable to set exec-path to %s\n"
msgstr "無法把執行檔路徑設成 %s\n"
#: g10/gpg.c:2840
#, c-format
msgid "%s:%d: invalid auto-key-locate list\n"
msgstr "%s:%d: 無效的自動金鑰定址清單\n"
#: g10/gpg.c:2843
msgid "invalid auto-key-locate list\n"
msgstr "無效的自動金鑰定址清單\n"
#: g10/gpg.c:2939 sm/gpgsm.c:1369
msgid "WARNING: program may create a core file!\n"
msgstr "警告: 程式可能會傾印出核心檔!\n"
#: g10/gpg.c:2943
#, c-format
msgid "WARNING: %s overrides %s\n"
msgstr "警告: %s 會推翻 %s\n"
#: g10/gpg.c:2952
#, c-format
msgid "%s not allowed with %s!\n"
msgstr "%s 不允許跟 %s 併用!\n"
#: g10/gpg.c:2955
#, c-format
msgid "%s makes no sense with %s!\n"
msgstr "%s 跟 %s 放在一起沒有意義!\n"
#: g10/gpg.c:2970
#, c-format
msgid "will not run with insecure memory due to %s\n"
msgstr "因為 %s 而不會在不安全的記憶體中執行\n"
#: g10/gpg.c:2984
msgid "you can only make detached or clear signatures while in --pgp2 mode\n"
msgstr "你祇有在 --pgp2 模式下纔能做出分離式或明文簽章\n"
#: g10/gpg.c:2990
msgid "you can't sign and encrypt at the same time while in --pgp2 mode\n"
msgstr "你在 --pgp2 模式下時, 不能同時簽署和加密\n"
#: g10/gpg.c:2996
msgid "you must use files (and not a pipe) when working with --pgp2 enabled.\n"
msgstr "啟用 --pgp2 時你祇應該使用檔案, 而非管道\n"
#: g10/gpg.c:3009
msgid "encrypting a message in --pgp2 mode requires the IDEA cipher\n"
msgstr "在 --pgp2 模式下加密訊息需要 IDEA 編密法\n"
#: g10/gpg.c:3075 g10/gpg.c:3099 sm/gpgsm.c:1441
msgid "selected cipher algorithm is invalid\n"
msgstr "所選的編密演算法無效\n"
#: g10/gpg.c:3081 g10/gpg.c:3105 sm/gpgsm.c:1449 sm/gpgsm.c:1455
msgid "selected digest algorithm is invalid\n"
msgstr "所選的摘要演算法無效\n"
#: g10/gpg.c:3087
msgid "selected compression algorithm is invalid\n"
msgstr "所選的壓縮演算法無效\n"
#: g10/gpg.c:3093
msgid "selected certification digest algorithm is invalid\n"
msgstr "所選的憑證摘要演算法無效\n"
#: g10/gpg.c:3108
msgid "completes-needed must be greater than 0\n"
msgstr "completes-needed 一定要大於 0\n"
#: g10/gpg.c:3110
msgid "marginals-needed must be greater than 1\n"
msgstr "marginals-needed 一定要大於 1\n"
#: g10/gpg.c:3112
msgid "max-cert-depth must be in the range from 1 to 255\n"
msgstr "max-cert-depth 一定要介於 1 和 255 之間\n"
#: g10/gpg.c:3114
msgid "invalid default-cert-level; must be 0, 1, 2, or 3\n"
msgstr "無效的 default-cert-level; 一定要是 0, 1, 2 或 3\n"
#: g10/gpg.c:3116
msgid "invalid min-cert-level; must be 1, 2, or 3\n"
msgstr "無效的 min-cert-level; 一定要是 1, 2 或 3\n"
#: g10/gpg.c:3119
msgid "NOTE: simple S2K mode (0) is strongly discouraged\n"
msgstr "請注意: 強烈不建議使用單純的 S2K 模式 (0)\n"
#: g10/gpg.c:3123
msgid "invalid S2K mode; must be 0, 1 or 3\n"
msgstr "無效的 S2K 模式; 一定要是 0, 1 或 3\n"
#: g10/gpg.c:3130
msgid "invalid default preferences\n"
msgstr "無效的預設偏好\n"
#: g10/gpg.c:3139
msgid "invalid personal cipher preferences\n"
msgstr "無效的個人編密法偏好\n"
#: g10/gpg.c:3143
msgid "invalid personal digest preferences\n"
msgstr "無效的個人摘要偏好\n"
#: g10/gpg.c:3147
msgid "invalid personal compress preferences\n"
msgstr "無效的個人壓縮偏好\n"
#: g10/gpg.c:3180
#, c-format
msgid "%s does not yet work with %s\n"
msgstr "%s 還沒辦法跟 %s 一起運作\n"
#: g10/gpg.c:3227
#, c-format
msgid "you may not use cipher algorithm `%s' while in %s mode\n"
msgstr "你不該將 `%s' 編密演算法用於 %s 模式中\n"
#: g10/gpg.c:3232
#, c-format
msgid "you may not use digest algorithm `%s' while in %s mode\n"
msgstr "你不該將 `%s' 摘要演算法用於 %s 模式中\n"
#: g10/gpg.c:3237
#, c-format
msgid "you may not use compression algorithm `%s' while in %s mode\n"
msgstr "你不該將 `%s' 壓縮演算法用於 %s 模式中\n"
#: g10/gpg.c:3329
#, c-format
msgid "failed to initialize the TrustDB: %s\n"
msgstr "信任資料庫啟始失敗: %s\n"
#: g10/gpg.c:3340
msgid "WARNING: recipients (-r) given without using public key encryption\n"
msgstr "警告: 給定的收件者 (-r) 未使用公鑰加密\n"
#: g10/gpg.c:3361
msgid "--store [filename]"
msgstr "--store [檔名]"
#: g10/gpg.c:3368
msgid "--symmetric [filename]"
msgstr "--symmetric [檔名]"
#: g10/gpg.c:3370
#, c-format
msgid "symmetric encryption of `%s' failed: %s\n"
msgstr "`%s' 對稱式加密失敗: %s\n"
#: g10/gpg.c:3380
msgid "--encrypt [filename]"
msgstr "--encrypt [檔名]"
#: g10/gpg.c:3393
msgid "--symmetric --encrypt [filename]"
msgstr "--symmetric --encrypt [檔名]"
#: g10/gpg.c:3395
msgid "you cannot use --symmetric --encrypt with --s2k-mode 0\n"
msgstr "你不能在 --s2k-mode 0 中使用 --symmetric --encrypt\n"
#: g10/gpg.c:3398
#, c-format
msgid "you cannot use --symmetric --encrypt while in %s mode\n"
msgstr "你不能在 %s 模式中使用 --symmetric --encrypt\n"
#: g10/gpg.c:3416
msgid "--sign [filename]"
msgstr "--sign [檔名]"
#: g10/gpg.c:3429
msgid "--sign --encrypt [filename]"
msgstr "--sign --encrypt [檔名]"
#: g10/gpg.c:3444
msgid "--symmetric --sign --encrypt [filename]"
msgstr "--symmetric --sign --encrypt [檔名]"
#: g10/gpg.c:3446
msgid "you cannot use --symmetric --sign --encrypt with --s2k-mode 0\n"
msgstr "你不能在 --s2k-mode 0 中使用 --symmetric --sign --encrypt\n"
#: g10/gpg.c:3449
#, c-format
msgid "you cannot use --symmetric --sign --encrypt while in %s mode\n"
msgstr "你不能在 %s 模式中使用 --symmetric --sign --encrypt\n"
#: g10/gpg.c:3469
msgid "--sign --symmetric [filename]"
msgstr "--sign --symmetric [檔名]"
#: g10/gpg.c:3478
msgid "--clearsign [filename]"
msgstr "--clearsign [檔名]"
#: g10/gpg.c:3503
msgid "--decrypt [filename]"
msgstr "--decrypt [檔名]"
#: g10/gpg.c:3511
msgid "--sign-key user-id"
msgstr "--sign-key 使用者ID"
#: g10/gpg.c:3515
msgid "--lsign-key user-id"
msgstr "--lsign-key 使用者ID"
#: g10/gpg.c:3536
msgid "--edit-key user-id [commands]"
msgstr "--edit-key 使用者ID [指令]"
#: g10/gpg.c:3621
#, c-format
msgid "keyserver send failed: %s\n"
msgstr "送至金鑰伺服器失敗: %s\n"
#: g10/gpg.c:3623
#, c-format
msgid "keyserver receive failed: %s\n"
msgstr "從金鑰伺服器接收失敗: %s\n"
#: g10/gpg.c:3625
#, c-format
msgid "key export failed: %s\n"
msgstr "金鑰匯出失敗: %s\n"
#: g10/gpg.c:3636
#, c-format
msgid "keyserver search failed: %s\n"
msgstr "用金鑰伺服器搜尋失敗: %s\n"
#: g10/gpg.c:3646
#, c-format
msgid "keyserver refresh failed: %s\n"
msgstr "從金鑰伺服器更新失敗: %s\n"
#: g10/gpg.c:3697
#, c-format
msgid "dearmoring failed: %s\n"
msgstr "解開封裝失敗: %s\n"
#: g10/gpg.c:3705
#, c-format
msgid "enarmoring failed: %s\n"
msgstr "進行封裝失敗: %s\n"
#: g10/gpg.c:3795
#, c-format
msgid "invalid hash algorithm `%s'\n"
msgstr "無效的 `%s' 雜湊演算法\n"
#: g10/gpg.c:3912
msgid "[filename]"
msgstr "[檔名]"
#: g10/gpg.c:3916
msgid "Go ahead and type your message ...\n"
msgstr "請開始輸入你的訊息 ...\n"
#: g10/gpg.c:4228
msgid "the given certification policy URL is invalid\n"
msgstr "給定的的憑證原則 URL 無效\n"
#: g10/gpg.c:4230
msgid "the given signature policy URL is invalid\n"
msgstr "給定的簽章原則 URL 無效\n"
#: g10/gpg.c:4263
msgid "the given preferred keyserver URL is invalid\n"
msgstr "給定的偏好金鑰伺服器 URL 無效\n"
#: g10/gpgv.c:72
msgid "take the keys from this keyring"
msgstr "從這個鑰匙圈裡取用金鑰"
#: g10/gpgv.c:74
msgid "make timestamp conflicts only a warning"
msgstr "僅把時間戳印矛盾視為警告"
#: g10/gpgv.c:75 sm/gpgsm.c:376
msgid "|FD|write status info to this FD"
msgstr "|檔案描述|把狀態資訊寫入此「檔案描述」"
#: g10/gpgv.c:99
msgid "Usage: gpgv [options] [files] (-h for help)"
msgstr "用法: gpgv [選項] [檔案] (或用 -h 求助)"
#: g10/gpgv.c:102
msgid ""
"Syntax: gpg [options] [files]\n"
"Check signatures against known trusted keys\n"
msgstr ""
"語法: gpg [選項] [檔案]\n"
"用已知的受信任金鑰來檢查簽章\n"
#: g10/helptext.c:72
msgid "No help available"
msgstr "沒有可用的說明"
#: g10/helptext.c:82
#, c-format
msgid "No help available for `%s'"
msgstr "`%s' 沒有可用的說明"
#: g10/import.c:94
msgid "import signatures that are marked as local-only"
msgstr "匯入標記為僅限本機使用的簽章"
#: g10/import.c:96
msgid "repair damage from the pks keyserver during import"
msgstr "匯入時修復來自 pks 金鑰伺服器的損壞"
#: g10/import.c:98
msgid "do not update the trustdb after import"
msgstr "匯入後不要更新信任資料庫"
#: g10/import.c:100
msgid "create a public key when importing a secret key"
msgstr "匯入私鑰時亦建立公鑰"
#: g10/import.c:102
msgid "only accept updates to existing keys"
msgstr "祇接受既有金鑰的更新"
#: g10/import.c:104
msgid "remove unusable parts from key after import"
msgstr "匯入後從金鑰中移除無法使用的部分"
#: g10/import.c:106
msgid "remove as much as possible from key after import"
msgstr "匯入後盡可能地從金鑰中移除"
#: g10/import.c:269
#, c-format
msgid "skipping block of type %d\n"
msgstr "正在跳過 %d 型態的區塊\n"
#: g10/import.c:278
#, c-format
msgid "%lu keys processed so far\n"
msgstr "目前已處理 %lu 把金鑰\n"
#: g10/import.c:295
#, c-format
msgid "Total number processed: %lu\n"
msgstr "處理總量: %lu\n"
#: g10/import.c:297
#, c-format
msgid " skipped new keys: %lu\n"
msgstr " 已跳過的新金鑰: %lu\n"
#: g10/import.c:300
#, c-format
msgid " w/o user IDs: %lu\n"
msgstr " 沒有使用者的 ID: %lu\n"
#: g10/import.c:302 sm/import.c:112
#, c-format
msgid " imported: %lu"
msgstr " 已匯入: %lu"
#: g10/import.c:308 sm/import.c:116
#, c-format
msgid " unchanged: %lu\n"
msgstr " 未改變的: %lu\n"
#: g10/import.c:310
#, c-format
msgid " new user IDs: %lu\n"
msgstr " 新的使用者 ID: %lu\n"
#: g10/import.c:312
#, c-format
msgid " new subkeys: %lu\n"
msgstr " 新的子鑰: %lu\n"
#: g10/import.c:314
#, c-format
msgid " new signatures: %lu\n"
msgstr " 新的簽章: %lu\n"
#: g10/import.c:316
#, c-format
msgid " new key revocations: %lu\n"
msgstr " 新的金鑰撤銷: %lu\n"
#: g10/import.c:318 sm/import.c:118
#, c-format
msgid " secret keys read: %lu\n"
msgstr " 已讀取的私鑰: %lu\n"
#: g10/import.c:320 sm/import.c:120
#, c-format
msgid " secret keys imported: %lu\n"
msgstr " 已匯入的私鑰: %lu\n"
#: g10/import.c:322 sm/import.c:122
#, c-format
msgid " secret keys unchanged: %lu\n"
msgstr " 未改變的私鑰: %lu\n"
#: g10/import.c:324 sm/import.c:124
#, c-format
msgid " not imported: %lu\n"
msgstr " 未被匯入: %lu\n"
#: g10/import.c:326
#, c-format
msgid " signatures cleaned: %lu\n"
msgstr " 已清除的簽章: %lu\n"
#: g10/import.c:328
#, c-format
msgid " user IDs cleaned: %lu\n"
msgstr " 已清除的使用者 ID: %lu\n"
#: g10/import.c:569
#, c-format
msgid ""
"WARNING: key %s contains preferences for unavailable\n"
"algorithms on these user IDs:\n"
msgstr "警告: 金鑰 %s 的偏好設定含有這些使用者 ID 無法使用的演算法:\n"
#: g10/import.c:610
#, c-format
msgid " \"%s\": preference for cipher algorithm %s\n"
msgstr " \"%s\": 編密演算法 %s 的偏好設定\n"
#: g10/import.c:625
#, c-format
msgid " \"%s\": preference for digest algorithm %s\n"
msgstr " \"%s\": 摘要演算法 %s 的偏好設定\n"
#: g10/import.c:637
#, c-format
msgid " \"%s\": preference for compression algorithm %s\n"
msgstr " \"%s\": 壓縮演算法 %s 的偏好設定\n"
#: g10/import.c:650
msgid "it is strongly suggested that you update your preferences and\n"
msgstr "我們強烈建議你更新偏好設定, 並重新\n"
#: g10/import.c:652
msgid "re-distribute this key to avoid potential algorithm mismatch problems\n"
msgstr "散佈此金鑰, 以避免潛在的演算法不一致問題.\n"
#: g10/import.c:676
#, c-format
msgid "you can update your preferences with: gpg --edit-key %s updpref save\n"
msgstr "你可以像這樣來更新偏好設定: gpg --edit-key %s updpref save\n"
#: g10/import.c:726 g10/import.c:1124
#, c-format
msgid "key %s: no user ID\n"
msgstr "金鑰 %s: 沒有使用者 ID\n"
#: g10/import.c:755
#, c-format
msgid "key %s: PKS subkey corruption repaired\n"
msgstr "金鑰 %s: PKS 子鑰的訛誤已被修復\n"
#: g10/import.c:770
#, c-format
msgid "key %s: accepted non self-signed user ID \"%s\"\n"
msgstr "金鑰 %s: 已接受非自我簽署的使用者 ID \"%s\"\n"
#: g10/import.c:776
#, c-format
msgid "key %s: no valid user IDs\n"
msgstr "金鑰 %s: 沒有有效的使用者 ID\n"
#: g10/import.c:778
msgid "this may be caused by a missing self-signature\n"
msgstr "這可能肇因於遺失自我簽章所致\n"
#: g10/import.c:788 g10/import.c:1246
#, c-format
msgid "key %s: public key not found: %s\n"
msgstr "金鑰 %s: 找不到公鑰: %s\n"
#: g10/import.c:794
#, c-format
msgid "key %s: new key - skipped\n"
msgstr "金鑰 %s: 新的金鑰 - 已跳過\n"
#: g10/import.c:803
#, c-format
msgid "no writable keyring found: %s\n"
msgstr "找不到可寫入的鑰匙圈: %s\n"
#: g10/import.c:808 g10/openfile.c:278 g10/sign.c:804 g10/sign.c:1113
#, c-format
msgid "writing to `%s'\n"
msgstr "寫入 `%s' 中\n"
#: g10/import.c:812 g10/import.c:907 g10/import.c:1164 g10/import.c:1307
#: g10/import.c:2382 g10/import.c:2404
#, c-format
msgid "error writing keyring `%s': %s\n"
msgstr "寫入鑰匙圈 `%s' 時出錯: %s\n"
#: g10/import.c:831
#, c-format
msgid "key %s: public key \"%s\" imported\n"
msgstr "金鑰 %s: 公鑰 \"%s\" 已匯入\n"
#: g10/import.c:855
#, c-format
msgid "key %s: doesn't match our copy\n"
msgstr "金鑰 %s: 跟我們的副本不吻合\n"
#: g10/import.c:872 g10/import.c:1264
#, c-format
msgid "key %s: can't locate original keyblock: %s\n"
msgstr "金鑰 %s: 無法定址原始的金鑰區塊: %s\n"
#: g10/import.c:880 g10/import.c:1271
#, c-format
msgid "key %s: can't read original keyblock: %s\n"
msgstr "金鑰 %s: 無法讀取原始的金鑰區塊: %s\n"
#: g10/import.c:917
#, c-format
msgid "key %s: \"%s\" 1 new user ID\n"
msgstr "金鑰 %s: \"%s\" 1 個新的使用者 ID\n"
#: g10/import.c:920
#, c-format
msgid "key %s: \"%s\" %d new user IDs\n"
msgstr "金鑰 %s: \"%s\" %d 個新的使用者 ID\n"
#: g10/import.c:923
#, c-format
msgid "key %s: \"%s\" 1 new signature\n"
msgstr "金鑰 %s: \"%s\" 1 份新的簽章\n"
#: g10/import.c:926
#, c-format
msgid "key %s: \"%s\" %d new signatures\n"
msgstr "金鑰 %s: \"%s\" %d 份新的簽章\n"
#: g10/import.c:929
#, c-format
msgid "key %s: \"%s\" 1 new subkey\n"
msgstr "金鑰 %s: \"%s\" 1 把新的子鑰\n"
#: g10/import.c:932
#, c-format
msgid "key %s: \"%s\" %d new subkeys\n"
msgstr "金鑰 %s: \"%s\" %d 把新的子鑰\n"
#: g10/import.c:935
#, c-format
msgid "key %s: \"%s\" %d signature cleaned\n"
msgstr "金鑰 %s: \"%s\" 已清除 %d 份簽章\n"
#: g10/import.c:938
#, c-format
msgid "key %s: \"%s\" %d signatures cleaned\n"
msgstr "金鑰 %s: \"%s\" 已清除 %d 份簽章\n"
#: g10/import.c:941
#, c-format
msgid "key %s: \"%s\" %d user ID cleaned\n"
msgstr "金鑰 %s: \"%s\" 已清除 %d 個使用者 ID\n"
#: g10/import.c:944
#, c-format
msgid "key %s: \"%s\" %d user IDs cleaned\n"
msgstr "金鑰 %s: \"%s\" 已清除 %d 個使用者 ID\n"
#: g10/import.c:967
#, c-format
msgid "key %s: \"%s\" not changed\n"
msgstr "金鑰 %s: \"%s\" 未改變\n"
#: g10/import.c:1130
#, c-format
msgid "key %s: secret key with invalid cipher %d - skipped\n"
msgstr "金鑰 %s: 私鑰使用了無效的 %d 編密法 - 已跳過\n"
#: g10/import.c:1141
msgid "importing secret keys not allowed\n"
msgstr "未允許匯入私鑰\n"
#: g10/import.c:1158 g10/import.c:2397
#, c-format
msgid "no default secret keyring: %s\n"
msgstr "沒有預設的私鑰鑰匙圈: %s\n"
#: g10/import.c:1169
#, c-format
msgid "key %s: secret key imported\n"
msgstr "金鑰 %s: 私鑰已匯入\n"
#: g10/import.c:1199
#, c-format
msgid "key %s: already in secret keyring\n"
msgstr "金鑰 %s: 已在私鑰鑰匙圈之中了\n"
#: g10/import.c:1209
#, c-format
msgid "key %s: secret key not found: %s\n"
msgstr "金鑰 %s: 找不到私鑰: %s\n"
#: g10/import.c:1239
#, c-format
msgid "key %s: no public key - can't apply revocation certificate\n"
msgstr "金鑰 %s: 沒有公鑰 - 無法套用撤銷憑證\n"
#: g10/import.c:1282
#, c-format
msgid "key %s: invalid revocation certificate: %s - rejected\n"
msgstr "金鑰 %s: 無效的撤銷憑證: %s - 已駁回\n"
#: g10/import.c:1314
#, c-format
msgid "key %s: \"%s\" revocation certificate imported\n"
msgstr "金鑰 %s: \"%s\" 撤銷憑證已匯入\n"
#: g10/import.c:1380
#, c-format
msgid "key %s: no user ID for signature\n"
msgstr "金鑰 %s: 簽章沒有使用者 ID\n"
#: g10/import.c:1395
#, c-format
msgid "key %s: unsupported public key algorithm on user ID \"%s\"\n"
msgstr "金鑰 %s: 使用者 ID \"%s\" 用了未支援的公鑰演算法\n"
#: g10/import.c:1397
#, c-format
msgid "key %s: invalid self-signature on user ID \"%s\"\n"
msgstr "金鑰 %s: 使用者 ID \"%s\" 的自我簽章無效\n"
#: g10/import.c:1415
#, c-format
msgid "key %s: no subkey for key binding\n"
msgstr "金鑰 %s: 沒有可供附帶的子鑰\n"
#: g10/import.c:1426 g10/import.c:1476
#, c-format
msgid "key %s: unsupported public key algorithm\n"
msgstr "金鑰 %s: 未支援的公鑰演算法\n"
#: g10/import.c:1428
#, c-format
msgid "key %s: invalid subkey binding\n"
msgstr "金鑰 %s: 無效的附帶子鑰\n"
#: g10/import.c:1443
#, c-format
msgid "key %s: removed multiple subkey binding\n"
msgstr "金鑰 %s: 多重附帶子鑰已移除\n"
#: g10/import.c:1465
#, c-format
msgid "key %s: no subkey for key revocation\n"
msgstr "金鑰 %s: 沒有子鑰可供金鑰撤銷\n"
#: g10/import.c:1478
#, c-format
msgid "key %s: invalid subkey revocation\n"
msgstr "金鑰 %s: 無效的子鑰撤銷\n"
#: g10/import.c:1493
#, c-format
msgid "key %s: removed multiple subkey revocation\n"
msgstr "金鑰 %s: 多重子鑰撤銷已移除\n"
#: g10/import.c:1535
#, c-format
msgid "key %s: skipped user ID \"%s\"\n"
msgstr "金鑰 %s: 使用者 ID \"%s\" 已跳過\n"
#: g10/import.c:1556
#, c-format
msgid "key %s: skipped subkey\n"
msgstr "金鑰 %s: 子鑰已跳過\n"
# here we violate the rfc a bit by still allowing
# * to import non-exportable signature when we have the
# * the secret key used to create this signature - it
# * seems that this makes sense
#: g10/import.c:1583
#, c-format
msgid "key %s: non exportable signature (class 0x%02X) - skipped\n"
msgstr "金鑰 %s: 不可匯出的簽章 (等級 0x%02X) - 已跳過\n"
#: g10/import.c:1593
#, c-format
msgid "key %s: revocation certificate at wrong place - skipped\n"
msgstr "金鑰 %s: 撤銷憑證在錯誤的地方 - 已跳過\n"
#: g10/import.c:1610
#, c-format
msgid "key %s: invalid revocation certificate: %s - skipped\n"
msgstr "金鑰 %s: 無效的撤銷憑證: %s - 已跳過\n"
#: g10/import.c:1624
#, c-format
msgid "key %s: subkey signature in wrong place - skipped\n"
msgstr "金鑰 %s: 子鑰簽章在錯誤的地方 - 已跳過\n"
#: g10/import.c:1632
#, c-format
msgid "key %s: unexpected signature class (0x%02X) - skipped\n"
msgstr "金鑰 %s: 非預期的簽章等級 (0x%02X) - 已跳過\n"
#: g10/import.c:1744
#, c-format
msgid "key %s: duplicated user ID detected - merged\n"
msgstr "金鑰 %s: 偵測到重複的使用者 ID - 已合併\n"
#: g10/import.c:1806
#, c-format
msgid "WARNING: key %s may be revoked: fetching revocation key %s\n"
msgstr "警告: 金鑰 %s 可能被撤銷了: 正在取回撤銷金鑰 %s\n"
#: g10/import.c:1820
#, c-format
msgid "WARNING: key %s may be revoked: revocation key %s not present.\n"
msgstr "警告: 金鑰 %s 可能被撤銷了: 撤銷金鑰 %s 未出現.\n"
#: g10/import.c:1879
#, c-format
msgid "key %s: \"%s\" revocation certificate added\n"
msgstr "金鑰 %s: 已新增 \"%s\" 撤銷憑證\n"
#: g10/import.c:1913
#, c-format
msgid "key %s: direct key signature added\n"
msgstr "金鑰 %s: 已新增直接金鑰簽章\n"
#: g10/import.c:2302
msgid "NOTE: a key's S/N does not match the card's one\n"
msgstr "請注意: 金鑰的序號 (S/N) 與卡片上的並不一致\n"
#: g10/import.c:2310
msgid "NOTE: primary key is online and stored on card\n"
msgstr "請注意: 主鑰在線上且已存放於卡片上了\n"
#: g10/import.c:2312
msgid "NOTE: secondary key is online and stored on card\n"
msgstr "請注意: 子鑰在線上且已存放於卡片上了\n"
#: g10/keydb.c:181
#, c-format
msgid "error creating keyring `%s': %s\n"
msgstr "建立 `%s' 鑰匙圈時出錯: %s\n"
#: g10/keydb.c:187
#, c-format
msgid "keyring `%s' created\n"
msgstr "`%s' 鑰匙圈已建立\n"
#: g10/keydb.c:328 g10/keydb.c:331
#, c-format
msgid "keyblock resource `%s': %s\n"
msgstr "`%s' 金鑰區塊資源: %s\n"
#: g10/keydb.c:710
#, c-format
msgid "failed to rebuild keyring cache: %s\n"
msgstr "重新建立鑰匙圈快取失敗: %s\n"
#: g10/keyedit.c:265
msgid "[revocation]"
msgstr "[撤銷]"
#: g10/keyedit.c:266
msgid "[self-signature]"
msgstr "[自我簽章]"
#: g10/keyedit.c:344 g10/keylist.c:388
msgid "1 bad signature\n"
msgstr "1 份損壞的簽章\n"
#: g10/keyedit.c:346 g10/keylist.c:390
#, c-format
msgid "%d bad signatures\n"
msgstr "%d 份損壞的簽章\n"
#: g10/keyedit.c:348 g10/keylist.c:392
msgid "1 signature not checked due to a missing key\n"
msgstr "有 1 份簽章因為遺失金鑰而未被檢查\n"
#: g10/keyedit.c:350 g10/keylist.c:394
#, c-format
msgid "%d signatures not checked due to missing keys\n"
msgstr "有 %d 份簽章因為遺失金鑰而未被檢查\n"
#: g10/keyedit.c:352 g10/keylist.c:396
msgid "1 signature not checked due to an error\n"
msgstr "有 1 份簽章因錯誤而未被檢查\n"
#: g10/keyedit.c:354 g10/keylist.c:398
#, c-format
msgid "%d signatures not checked due to errors\n"
msgstr "有 %d 份簽章因錯誤而未被檢查\n"
#: g10/keyedit.c:356
msgid "1 user ID without valid self-signature detected\n"
msgstr "偵測到 1 個沒有有效自我簽章的使用者 ID\n"
#: g10/keyedit.c:358
#, c-format
msgid "%d user IDs without valid self-signatures detected\n"
msgstr "偵測到 %d 個沒有有效自我簽章的使用者 ID\n"
#: g10/keyedit.c:414 g10/pkclist.c:261
msgid ""
"Please decide how far you trust this user to correctly verify other users' "
"keys\n"
"(by looking at passports, checking fingerprints from different sources, "
"etc.)\n"
msgstr ""
"請判斷你有多信任這位使用者確實驗證其他使用者的金鑰\n"
"(像是查對身份證, 或從不同的來源檢查指紋等...)的能力\n"
#: g10/keyedit.c:418 g10/pkclist.c:273
#, c-format
msgid " %d = I trust marginally\n"
msgstr " %d = 我勉強信任\n"
#: g10/keyedit.c:419 g10/pkclist.c:275
#, c-format
msgid " %d = I trust fully\n"
msgstr " %d = 我完全信任\n"
#: g10/keyedit.c:438
msgid ""
"Please enter the depth of this trust signature.\n"
"A depth greater than 1 allows the key you are signing to make\n"
"trust signatures on your behalf.\n"
msgstr ""
"請輸入此信任簽章的深度.\n"
"深度大於 1 的話就表示你信任這把正被簽署的金鑰,\n"
"同時也信任這把金鑰所簽署的信任簽章.\n"
#: g10/keyedit.c:454
msgid "Please enter a domain to restrict this signature, or enter for none.\n"
msgstr "請輸入約束此簽章的網域, 若無請直接按下 [Enter].\n"
#: g10/keyedit.c:598
#, c-format
msgid "User ID \"%s\" is revoked."
msgstr "使用者 ID \"%s\" 已撤銷."
#: g10/keyedit.c:607 g10/keyedit.c:635 g10/keyedit.c:662 g10/keyedit.c:830
#: g10/keyedit.c:895 g10/keyedit.c:1753
msgid "Are you sure you still want to sign it? (y/N) "
msgstr "你仍然想要簽署它嗎? (y/N) "
#: g10/keyedit.c:621 g10/keyedit.c:649 g10/keyedit.c:676 g10/keyedit.c:836
#: g10/keyedit.c:1759
msgid " Unable to sign.\n"
msgstr " 無法簽署.\n"
#: g10/keyedit.c:626
#, c-format
msgid "User ID \"%s\" is expired."
msgstr "使用者 ID \"%s\" 已過期."
#: g10/keyedit.c:654
#, c-format
msgid "User ID \"%s\" is not self-signed."
msgstr "使用者 ID \"%s\" 未經自我簽署."
#: g10/keyedit.c:682
#, c-format
msgid "User ID \"%s\" is signable. "
msgstr "使用者 ID \"%s\" 可被簽署."
#: g10/keyedit.c:684
msgid "Sign it? (y/N) "
msgstr "是否要簽署? (y/N) "
#: g10/keyedit.c:706
#, c-format
msgid ""
"The self-signature on \"%s\"\n"
"is a PGP 2.x-style signature.\n"
msgstr ""
"\"%s\" 裡的自我簽章\n"
"是 PGP 2.x 型態的簽章.\n"
#: g10/keyedit.c:715
msgid "Do you want to promote it to an OpenPGP self-signature? (y/N) "
msgstr "你是否想要將它升級成 OpenPGP 自我簽章? (y/N) "
#: g10/keyedit.c:729
#, c-format
msgid ""
"Your current signature on \"%s\"\n"
"has expired.\n"
msgstr ""
"你目前在 \"%s\" 的簽章\n"
"已經過期了.\n"
#: g10/keyedit.c:733
msgid "Do you want to issue a new signature to replace the expired one? (y/N) "
msgstr "你想要發佈一份新的簽章來取代已過期的那個嗎? (y/N) "
#: g10/keyedit.c:754
#, c-format
msgid ""
"Your current signature on \"%s\"\n"
"is a local signature.\n"
msgstr ""
"你目前在 \"%s\" 的簽章\n"
"是一份本機簽章.\n"
#: g10/keyedit.c:758
msgid "Do you want to promote it to a full exportable signature? (y/N) "
msgstr "你是否想要把他升級成可以完全匯出的簽章? (y/N) "
#: g10/keyedit.c:779
#, c-format
msgid "\"%s\" was already locally signed by key %s\n"
msgstr "\"%s\" 已經被金鑰 %s 在本機簽署了\n"
#: g10/keyedit.c:782
#, c-format
msgid "\"%s\" was already signed by key %s\n"
msgstr "\"%s\" 已經被金鑰 %s 簽署了\n"
#: g10/keyedit.c:787
msgid "Do you want to sign it again anyway? (y/N) "
msgstr "你仍然想要再次簽署它嗎? (y/N) "
#: g10/keyedit.c:809
#, c-format
msgid "Nothing to sign with key %s\n"
msgstr "沒有東西可以讓金鑰 %s 簽署\n"
#: g10/keyedit.c:824
msgid "This key has expired!"
msgstr "這把金鑰已經過期了!"
#: g10/keyedit.c:842
#, c-format
msgid "This key is due to expire on %s.\n"
msgstr "這把金鑰將在 %s 過期.\n"
#: g10/keyedit.c:848
msgid "Do you want your signature to expire at the same time? (Y/n) "
msgstr "你想要讓你的簽章也在同一個時候過期嗎? (Y/n) "
#: g10/keyedit.c:888
msgid ""
"You may not make an OpenPGP signature on a PGP 2.x key while in --pgp2 "
"mode.\n"
msgstr "你不能在 --pgp2 模式下, 拿 PGP 2.x 金鑰做出 OpenPGP 簽章.\n"
#: g10/keyedit.c:890
msgid "This would make the key unusable in PGP 2.x.\n"
msgstr "這會讓這把金鑰在 PGP 2.x 模式下無法使用.\n"
#: g10/keyedit.c:915
msgid ""
"How carefully have you verified the key you are about to sign actually "
"belongs\n"
"to the person named above? If you don't know what to answer, enter \"0\".\n"
msgstr ""
"你有多謹慎檢查正要簽署的金鑰確實屬於上面那個人的名字呢?\n"
"如果你不知道這個問題的答案, 請輸入 \"0\".\n"
#: g10/keyedit.c:920
#, c-format
msgid " (0) I will not answer.%s\n"
msgstr " (0) 我不作答.%s\n"
#: g10/keyedit.c:922
#, c-format
msgid " (1) I have not checked at all.%s\n"
msgstr " (1) 我根本沒有檢查過.%s\n"
#: g10/keyedit.c:924
#, c-format
msgid " (2) I have done casual checking.%s\n"
msgstr " (2) 我隨意檢查過了.%s\n"
#: g10/keyedit.c:926
#, c-format
msgid " (3) I have done very careful checking.%s\n"
msgstr " (3) 我非常小心地檢查過了.%s\n"
#: g10/keyedit.c:932
msgid "Your selection? (enter `?' for more information): "
msgstr "你的選擇是? (輸入 `?' 以取得更多資訊): "
#: g10/keyedit.c:956
#, c-format
msgid ""
"Are you sure that you want to sign this key with your\n"
"key \"%s\" (%s)\n"
msgstr ""
"你真的確定要用你的金鑰 \"%s\" (%s)\n"
"來簽署這把金鑰嗎\n"
#: g10/keyedit.c:963
msgid "This will be a self-signature.\n"
msgstr "這將會是一份自我簽章.\n"
#: g10/keyedit.c:969
msgid "WARNING: the signature will not be marked as non-exportable.\n"
msgstr "警告: 這份簽章不會被標記為不可匯出.\n"
#: g10/keyedit.c:977
msgid "WARNING: the signature will not be marked as non-revocable.\n"
msgstr "警告: 這份簽章不會被標記成不可撤銷.\n"
#: g10/keyedit.c:987
msgid "The signature will be marked as non-exportable.\n"
msgstr "這份簽章會被標記成不可匯出.\n"
#: g10/keyedit.c:994
msgid "The signature will be marked as non-revocable.\n"
msgstr "這份簽章會被標記成不可撤銷.\n"
#: g10/keyedit.c:1001
msgid "I have not checked this key at all.\n"
msgstr "我根本沒有檢查過這把金鑰.\n"
#: g10/keyedit.c:1006
msgid "I have checked this key casually.\n"
msgstr "我隨意檢查過這把金鑰了.\n"
#: g10/keyedit.c:1011
msgid "I have checked this key very carefully.\n"
msgstr "我非常小心地檢查過這把金鑰了.\n"
#: g10/keyedit.c:1021
msgid "Really sign? (y/N) "
msgstr "真的要簽署嗎? (y/N)"
#: g10/keyedit.c:1066 g10/keyedit.c:4804 g10/keyedit.c:4895 g10/keyedit.c:4959
#: g10/keyedit.c:5020 g10/sign.c:316
#, c-format
msgid "signing failed: %s\n"
msgstr "簽署時失敗: %s\n"
#: g10/keyedit.c:1131
msgid "Key has only stub or on-card key items - no passphrase to change.\n"
msgstr "金鑰祇剩下殘骸或者祇含有卡上金鑰項目 - 沒有可變更的密語.\n"
#: g10/keyedit.c:1142 g10/keygen.c:3530
msgid "This key is not protected.\n"
msgstr "這把金鑰未被保護.\n"
#: g10/keyedit.c:1146 g10/keygen.c:3517 g10/revoke.c:538
msgid "Secret parts of primary key are not available.\n"
msgstr "主鑰的私鑰部分無法取用.\n"
#: g10/keyedit.c:1150 g10/keygen.c:3533
msgid "Secret parts of primary key are stored on-card.\n"
msgstr "主鑰的私鑰部分存放於卡上.\n"
#: g10/keyedit.c:1154 g10/keygen.c:3537
msgid "Key is protected.\n"
msgstr "金鑰已保護.\n"
#: g10/keyedit.c:1178
#, c-format
msgid "Can't edit this key: %s\n"
msgstr "無法編輯這把金鑰: %s\n"
#: g10/keyedit.c:1184
msgid ""
"Enter the new passphrase for this secret key.\n"
"\n"
msgstr ""
"請輸入要給這把私鑰用的新密語.\n"
"\n"
#: g10/keyedit.c:1199 g10/keygen.c:2130
msgid "passphrase not correctly repeated; try again"
msgstr "前後兩次輸入的密語不一致; 請再試一次"
#: g10/keyedit.c:1204
msgid ""
"You don't want a passphrase - this is probably a *bad* idea!\n"
"\n"
msgstr ""
"你不想要用密語 - 這大概是個 *糟* 點子!\n"
"\n"
#: g10/keyedit.c:1207
msgid "Do you really want to do this? (y/N) "
msgstr "你真的想要這麼做嗎? (y/N) "
#: g10/keyedit.c:1278
msgid "moving a key signature to the correct place\n"
msgstr "正在把金鑰的簽章搬移到正確的位置去\n"
#: g10/keyedit.c:1364
msgid "save and quit"
msgstr "儲存並離開"
#: g10/keyedit.c:1367
msgid "show key fingerprint"
msgstr "顯示金鑰指紋"
#: g10/keyedit.c:1368
msgid "list key and user IDs"
msgstr "列出金鑰和使用者 ID"
#: g10/keyedit.c:1370
msgid "select user ID N"
msgstr "選擇使用者 ID N"
#: g10/keyedit.c:1371
msgid "select subkey N"
msgstr "選擇子鑰 N"
#: g10/keyedit.c:1372
msgid "check signatures"
msgstr "檢查簽章"
#: g10/keyedit.c:1377
msgid "sign selected user IDs [* see below for related commands]"
msgstr "簽署所選的使用者 ID [* 請參見底下相關的註解]"
#: g10/keyedit.c:1382
msgid "sign selected user IDs locally"
msgstr "僅在本機簽署所選的使用者 ID"
#: g10/keyedit.c:1384
msgid "sign selected user IDs with a trust signature"
msgstr "用信任簽章來簽署所選的使用者 ID"
#: g10/keyedit.c:1386
msgid "sign selected user IDs with a non-revocable signature"
msgstr "用不可撤銷的簽章來簽署所選的使用者 ID"
#: g10/keyedit.c:1390
msgid "add a user ID"
msgstr "增加使用者 ID"
#: g10/keyedit.c:1392
msgid "add a photo ID"
msgstr "增加照片 ID"
#: g10/keyedit.c:1394
msgid "delete selected user IDs"
msgstr "刪除所選的使用者 ID"
#: g10/keyedit.c:1399
msgid "add a subkey"
msgstr "增加子鑰"
#: g10/keyedit.c:1403
msgid "add a key to a smartcard"
msgstr "將金鑰加到智慧卡"
#: g10/keyedit.c:1405
msgid "move a key to a smartcard"
msgstr "將金鑰移動到智慧卡"
#: g10/keyedit.c:1407
msgid "move a backup key to a smartcard"
msgstr "將備份金鑰移動到智慧卡"
#: g10/keyedit.c:1411
msgid "delete selected subkeys"
msgstr "刪除所選的子鑰"
#: g10/keyedit.c:1413
msgid "add a revocation key"
msgstr "增加撤銷金鑰"
#: g10/keyedit.c:1415
msgid "delete signatures from the selected user IDs"
msgstr "從所選的使用者 ID 中刪除簽章"
#: g10/keyedit.c:1417
msgid "change the expiration date for the key or selected subkeys"
msgstr "變更金鑰或所選子鑰的使用期限"
#: g10/keyedit.c:1419
msgid "flag the selected user ID as primary"
msgstr "把所選的使用者 ID 標為主要"
#: g10/keyedit.c:1421
msgid "toggle between the secret and public key listings"
msgstr "在私鑰清單和公鑰清單間切換"
#: g10/keyedit.c:1424
msgid "list preferences (expert)"
msgstr "列出偏好 (專家模式)"
#: g10/keyedit.c:1426
msgid "list preferences (verbose)"
msgstr "列出偏好 (囉唆模式)"
#: g10/keyedit.c:1428
msgid "set preference list for the selected user IDs"
msgstr "設定所選使用者 ID 的偏好清單"
#: g10/keyedit.c:1433
msgid "set the preferred keyserver URL for the selected user IDs"
msgstr "為所選的使用者 ID 設定偏好的金鑰伺服器 URL"
#: g10/keyedit.c:1435
msgid "set a notation for the selected user IDs"
msgstr "為所選的使用者 ID 設定註記"
#: g10/keyedit.c:1437
msgid "change the passphrase"
msgstr "更改密語"
#: g10/keyedit.c:1441
msgid "change the ownertrust"
msgstr "更改主觀信任"
#: g10/keyedit.c:1443
msgid "revoke signatures on the selected user IDs"
msgstr "撤銷所選使用者 ID 的簽章"
#: g10/keyedit.c:1445
msgid "revoke selected user IDs"
msgstr "撤銷所選的使用者 ID"
#: g10/keyedit.c:1450
msgid "revoke key or selected subkeys"
msgstr "撤銷金鑰或所選的子鑰"
#: g10/keyedit.c:1451
msgid "enable key"
msgstr "啟用金鑰"
#: g10/keyedit.c:1452
msgid "disable key"
msgstr "停用金鑰"
#: g10/keyedit.c:1453
msgid "show selected photo IDs"
msgstr "顯示所選的照片 ID"
#: g10/keyedit.c:1455
msgid "compact unusable user IDs and remove unusable signatures from key"
msgstr "從金鑰中精簡無法使用的使用者 ID 並移除無法使用的簽章"
#: g10/keyedit.c:1457
msgid "compact unusable user IDs and remove all signatures from key"
msgstr "從金鑰中精簡無法使用的使用者 ID 並移除所有的簽章"
#: g10/keyedit.c:1579
#, c-format
msgid "error reading secret keyblock \"%s\": %s\n"
msgstr "讀取私鑰區塊 \"%s\" 時出錯: %s\n"
#: g10/keyedit.c:1597
msgid "Secret key is available.\n"
msgstr "私鑰可用.\n"
#: g10/keyedit.c:1680
msgid "Need the secret key to do this.\n"
msgstr "要有私鑰纔能這麼做.\n"
#: g10/keyedit.c:1688
msgid "Please use the command \"toggle\" first.\n"
msgstr "請先使用 \"toggle\" 指令.\n"
#: g10/keyedit.c:1707
msgid ""
"* The `sign' command may be prefixed with an `l' for local signatures "
"(lsign),\n"
" a `t' for trust signatures (tsign), an `nr' for non-revocable signatures\n"
" (nrsign), or any combination thereof (ltsign, tnrsign, etc.).\n"
msgstr ""
"* 這個 `sign' 指令也可以在前面加上一個 `l' 字母, 來表示本機簽章 (lsign),\n"
" 加上 `t' 的話就是信任簽章 (tsign), 加上 `nr' 的話就是不可撤銷簽章\n"
" (nrsign), 當然也可以任意組合這些選項 (像是 ltsign, tnrsign 等等.).\n"
#: g10/keyedit.c:1747
msgid "Key is revoked."
msgstr "金鑰已撤銷."
#: g10/keyedit.c:1766
msgid "Really sign all user IDs? (y/N) "
msgstr "真的要簽署所有的使用者 ID 嗎? (y/N) "
#: g10/keyedit.c:1773
msgid "Hint: Select the user IDs to sign\n"
msgstr "提示: 選擇使用者 ID 來加以簽署\n"
#: g10/keyedit.c:1782
#, c-format
msgid "Unknown signature type `%s'\n"
msgstr "未知的 `%s' 簽章種類\n"
#: g10/keyedit.c:1805
#, c-format
msgid "This command is not allowed while in %s mode.\n"
msgstr "在 %s 模式中不允許使用這個指令.\n"
#: g10/keyedit.c:1827 g10/keyedit.c:1847 g10/keyedit.c:2013
msgid "You must select at least one user ID.\n"
msgstr "你至少得選擇一個使用者 ID.\n"
#: g10/keyedit.c:1829
msgid "You can't delete the last user ID!\n"
msgstr "你不能刪除最後一個使用者 ID!\n"
#: g10/keyedit.c:1831
msgid "Really remove all selected user IDs? (y/N) "
msgstr "真的要移除所有被選擇的使用者 ID 嗎? (y/N) "
#: g10/keyedit.c:1832
msgid "Really remove this user ID? (y/N) "
msgstr "真的要移除這個使用者 ID 嗎? (y/N) "
#: g10/keyedit.c:1882
msgid "Really move the primary key? (y/N) "
msgstr "真的要移動主鑰嗎? (y/N) "
#: g10/keyedit.c:1894
msgid "You must select exactly one key.\n"
msgstr "你一定祇得選擇一把金鑰.\n"
#: g10/keyedit.c:1922
msgid "Command expects a filename argument\n"
msgstr "這項指令要拿一個檔名來當作引數\n"
#: g10/keyedit.c:1936
#, c-format
msgid "Can't open `%s': %s\n"
msgstr "無法開啟 `%s': %s\n"
#: g10/keyedit.c:1953
#, c-format
msgid "Error reading backup key from `%s': %s\n"
msgstr "從 `%s' 讀取備份金鑰時出錯: %s\n"
#: g10/keyedit.c:1977
msgid "You must select at least one key.\n"
msgstr "你至少得選擇一把金鑰.\n"
#: g10/keyedit.c:1980
msgid "Do you really want to delete the selected keys? (y/N) "
msgstr "你真的想要刪除所選的金鑰嗎? (y/N) "
#: g10/keyedit.c:1981
msgid "Do you really want to delete this key? (y/N) "
msgstr "你真的想要刪除這把金鑰嗎? (y/N) "
#: g10/keyedit.c:2016
msgid "Really revoke all selected user IDs? (y/N) "
msgstr "真的要撤銷所有所選的使用者 ID 嗎? (y/N) "
#: g10/keyedit.c:2017
msgid "Really revoke this user ID? (y/N) "
msgstr "真的要撤銷這個使用者 ID 嗎? (y/N) "
#: g10/keyedit.c:2035
msgid "Do you really want to revoke the entire key? (y/N) "
msgstr "你真的想要撤銷這整把金鑰嗎? (y/N) "
#: g10/keyedit.c:2046
msgid "Do you really want to revoke the selected subkeys? (y/N) "
msgstr "你真的想要撤銷所選的子鑰嗎? (y/N) "
#: g10/keyedit.c:2048
msgid "Do you really want to revoke this subkey? (y/N) "
msgstr "你真的想要撤銷這把子鑰嗎? (y/N) "
#: g10/keyedit.c:2098
msgid "Owner trust may not be set while using a user provided trust database\n"
msgstr "使用使用者所提供的信任資料庫時可能無法設定主觀信任\n"
#: g10/keyedit.c:2140
msgid "Set preference list to:\n"
msgstr "設定偏好清單至:\n"
#: g10/keyedit.c:2146
msgid "Really update the preferences for the selected user IDs? (y/N) "
msgstr "真的要更新所選使用者 ID 的偏好設定嗎? (y/N) "
#: g10/keyedit.c:2148
msgid "Really update the preferences? (y/N) "
msgstr "真的要更新偏好設定嗎? (y/N) "
#: g10/keyedit.c:2216
msgid "Save changes? (y/N) "
msgstr "要儲存變更嗎? (y/N) "
#: g10/keyedit.c:2219
msgid "Quit without saving? (y/N) "
msgstr "要不儲存就離開嗎? (y/N) "
#: g10/keyedit.c:2229
#, c-format
msgid "update failed: %s\n"
msgstr "更新失敗: %s\n"
#: g10/keyedit.c:2236
#, c-format
msgid "update secret failed: %s\n"
msgstr "更新私鑰失敗: %s\n"
#: g10/keyedit.c:2243
msgid "Key not changed so no update needed.\n"
msgstr "金鑰沒有變更所以不需要更新.\n"
#: g10/keyedit.c:2344
msgid "Digest: "
msgstr "摘要: "
#: g10/keyedit.c:2395
msgid "Features: "
msgstr "特點: "
#: g10/keyedit.c:2406
msgid "Keyserver no-modify"
msgstr "金鑰伺服器無修改"
#: g10/keyedit.c:2421 g10/keylist.c:306
msgid "Preferred keyserver: "
msgstr "偏好的金鑰伺服器: "
#: g10/keyedit.c:2429 g10/keyedit.c:2430
msgid "Notations: "
msgstr "註記: "
#: g10/keyedit.c:2640
msgid "There are no preferences on a PGP 2.x-style user ID.\n"
msgstr "PGP 2.x 型態的使用者 ID 沒有偏好設定.\n"
#: g10/keyedit.c:2699
#, c-format
msgid "This key was revoked on %s by %s key %s\n"
msgstr "這把金鑰已經在 %s 時被 %s 金鑰 %s 所撤銷\n"
#: g10/keyedit.c:2720
#, c-format
msgid "This key may be revoked by %s key %s"
msgstr "這把金鑰可能被 %s 金鑰 %s 所撤銷"
#: g10/keyedit.c:2726
msgid "(sensitive)"
msgstr "(機密)"
#: g10/keyedit.c:2742 g10/keyedit.c:2798 g10/keyedit.c:2859 g10/keyedit.c:2874
#: g10/keylist.c:192 g10/keyserver.c:521
#, c-format
msgid "created: %s"
msgstr "建立: %s"
#: g10/keyedit.c:2745 g10/keylist.c:769 g10/keylist.c:863 g10/mainproc.c:989
#, c-format
msgid "revoked: %s"
msgstr "撤銷: %s"
# of subkey
#: g10/keyedit.c:2747 g10/keylist.c:740 g10/keylist.c:775 g10/keylist.c:869
#, c-format
msgid "expired: %s"
msgstr "過期: %s"
# of subkey
#: g10/keyedit.c:2749 g10/keyedit.c:2800 g10/keyedit.c:2861 g10/keyedit.c:2876
#: g10/keylist.c:194 g10/keylist.c:746 g10/keylist.c:781 g10/keylist.c:875
#: g10/keylist.c:896 g10/keyserver.c:527 g10/mainproc.c:995
#, c-format
msgid "expires: %s"
msgstr "到期: %s"
#: g10/keyedit.c:2751
#, c-format
msgid "usage: %s"
msgstr "用途: %s"
#: g10/keyedit.c:2766
#, c-format
msgid "trust: %s"
msgstr "信任: %s"
#: g10/keyedit.c:2770
#, c-format
msgid "validity: %s"
msgstr "有效性: %s"
#: g10/keyedit.c:2777
msgid "This key has been disabled"
msgstr "這把金鑰已經停用了"
#: g10/keyedit.c:2805 g10/keylist.c:198
msgid "card-no: "
msgstr "卡片編號: "
#: g10/keyedit.c:2829
msgid ""
"Please note that the shown key validity is not necessarily correct\n"
"unless you restart the program.\n"
msgstr ""
"請注意顯示出來的金鑰有效性不需要更正,\n"
"除非你重新執行程式.\n"
#: g10/keyedit.c:2893 g10/keyedit.c:3239 g10/keyserver.c:531
#: g10/mainproc.c:1841 g10/trustdb.c:1173 g10/trustdb.c:1693
msgid "revoked"
msgstr "已撤銷"
#: g10/keyedit.c:2895 g10/keyedit.c:3241 g10/keyserver.c:535
#: g10/mainproc.c:1843 g10/trustdb.c:526 g10/trustdb.c:1695
msgid "expired"
msgstr "已過期"
#: g10/keyedit.c:2960
msgid ""
"WARNING: no user ID has been marked as primary. This command may\n"
" cause a different user ID to become the assumed primary.\n"
msgstr ""
"警告: 沒有任何使用者 ID 被標示為主要 ID. 這項指令可能會\n"
" 導致不同的使用者 ID 被當成主要 ID.\n"
#: g10/keyedit.c:3021
msgid ""
"WARNING: This is a PGP2-style key. Adding a photo ID may cause some "
"versions\n"
" of PGP to reject this key.\n"
msgstr ""
"警告: 這是一把 PGP2 型態的金鑰.\n"
" 增加照片 ID 可能會導致某些版本的 PGP 駁回這把金鑰.\n"
#: g10/keyedit.c:3026 g10/keyedit.c:3361
msgid "Are you sure you still want to add it? (y/N) "
msgstr "你確定仍然想要增加嗎? (y/N) "
#: g10/keyedit.c:3032
msgid "You may not add a photo ID to a PGP2-style key.\n"
msgstr "你不可以把照片 ID 增加到 PGP2 型態的金鑰裡.\n"
#: g10/keyedit.c:3172
msgid "Delete this good signature? (y/N/q)"
msgstr "刪除這份完好的簽章嗎? (y/N/q)"
#: g10/keyedit.c:3182
msgid "Delete this invalid signature? (y/N/q)"
msgstr "刪除這份無效的簽章嗎? (y/N/q)"
#: g10/keyedit.c:3186
msgid "Delete this unknown signature? (y/N/q)"
msgstr "刪除這份未知的簽章嗎? (y/N/q)"
#: g10/keyedit.c:3192
msgid "Really delete this self-signature? (y/N)"
msgstr "真的要刪除這份自我簽章嗎? (y/N)"
#: g10/keyedit.c:3206
#, c-format
msgid "Deleted %d signature.\n"
msgstr "已經刪除了 %d 份簽章.\n"
#: g10/keyedit.c:3207
#, c-format
msgid "Deleted %d signatures.\n"
msgstr "已經刪除了 %d 份簽章.\n"
#: g10/keyedit.c:3210
msgid "Nothing deleted.\n"
msgstr "沒有刪除任何東西.\n"
#: g10/keyedit.c:3243 g10/trustdb.c:1697
msgid "invalid"
msgstr "無效"
#: g10/keyedit.c:3245
#, c-format
msgid "User ID \"%s\" compacted: %s\n"
msgstr "使用者 ID \"%s\" 已精簡: %s\n"
#: g10/keyedit.c:3252
#, c-format
msgid "User ID \"%s\": %d signature removed\n"
msgstr "使用者 ID \"%s\": 已移除 %d 份簽章\n"
#: g10/keyedit.c:3253
#, c-format
msgid "User ID \"%s\": %d signatures removed\n"
msgstr "使用者 ID \"%s\": 已移除 %d 份簽章\n"
#: g10/keyedit.c:3261
#, c-format
msgid "User ID \"%s\": already minimized\n"
msgstr "使用者 ID \"%s\": 已經最小化了\n"
#: g10/keyedit.c:3262
#, c-format
msgid "User ID \"%s\": already clean\n"
msgstr "使用者 ID \"%s\": 已經是乾淨的了\n"
#: g10/keyedit.c:3356
msgid ""
"WARNING: This is a PGP 2.x-style key. Adding a designated revoker may "
"cause\n"
" some versions of PGP to reject this key.\n"
msgstr ""
"警告: 這是一把 PGP2 型態的金鑰.\n"
" 增加指定撤銷者可能會導致某些版本的 PGP 駁回這把金鑰.\n"
#: g10/keyedit.c:3367
msgid "You may not add a designated revoker to a PGP 2.x-style key.\n"
msgstr "你不可以把指定撤銷者增加到 PGP2 型態的金鑰裡.\n"
#: g10/keyedit.c:3387
msgid "Enter the user ID of the designated revoker: "
msgstr "輸入指定撤銷者的使用者 ID: "
#: g10/keyedit.c:3412
msgid "cannot appoint a PGP 2.x style key as a designated revoker\n"
msgstr "無法將 PGP 2.x 型態的金鑰指派為指定撤銷者\n"
# This actually causes no harm (after all, a key that
# designates itself as a revoker is the same as a
# regular key), but it's easy enough to check.
#: g10/keyedit.c:3427
msgid "you cannot appoint a key as its own designated revoker\n"
msgstr "你不能指派某把金鑰為它自己的指定撤銷者\n"
#: g10/keyedit.c:3449
msgid "this key has already been designated as a revoker\n"
msgstr "已指定這把金鑰為撤銷者了\n"
#: g10/keyedit.c:3468
msgid "WARNING: appointing a key as a designated revoker cannot be undone!\n"
msgstr "警告: 一旦把某把金鑰指派為指定撤銷者後, 就無法反悔了!\n"
#: g10/keyedit.c:3474
msgid ""
"Are you sure you want to appoint this key as a designated revoker? (y/N) "
msgstr "你確定要指派這把金鑰為指定撤銷者嗎? (y/N) "
#: g10/keyedit.c:3535
msgid "Please remove selections from the secret keys.\n"
msgstr "請從私鑰中移除選擇.\n"
#: g10/keyedit.c:3541
msgid "Please select at most one subkey.\n"
msgstr "請至多選擇一把子鑰.\n"
#: g10/keyedit.c:3545
msgid "Changing expiration time for a subkey.\n"
msgstr "正在變更子鑰的使用期限.\n"
#: g10/keyedit.c:3548
msgid "Changing expiration time for the primary key.\n"
msgstr "正在變更主鑰的使用期限.\n"
#: g10/keyedit.c:3594
msgid "You can't change the expiration date of a v3 key\n"
msgstr "你不能變更 v3 金鑰的使用期限\n"
#: g10/keyedit.c:3610
msgid "No corresponding signature in secret ring\n"
msgstr "在私鑰圈裡沒有一致的簽章\n"
#: g10/keyedit.c:3688
#, c-format
msgid "signing subkey %s is already cross-certified\n"
msgstr "簽署子鑰 %s 已經交叉認證過了\n"
#: g10/keyedit.c:3694
#, c-format
msgid "subkey %s does not sign and so does not need to be cross-certified\n"
msgstr "子鑰 %s 不做簽署之用, 因此無須交叉驗證\n"
#: g10/keyedit.c:3857
msgid "Please select exactly one user ID.\n"
msgstr "請祇選擇一個使用者 ID.\n"
#: g10/keyedit.c:3896 g10/keyedit.c:4006 g10/keyedit.c:4126 g10/keyedit.c:4267
#, c-format
msgid "skipping v3 self-signature on user ID \"%s\"\n"
msgstr "正在跳過使用者 ID \"%s\" 的 v3 自我簽章\n"
#: g10/keyedit.c:4067
msgid "Enter your preferred keyserver URL: "
msgstr "請輸入你的偏好金鑰伺服器 URL: "
#: g10/keyedit.c:4147
msgid "Are you sure you want to replace it? (y/N) "
msgstr "你確定要取代它嗎? (y/N) "
#: g10/keyedit.c:4148
msgid "Are you sure you want to delete it? (y/N) "
msgstr "你確定要刪除它嗎? (y/N) "
#: g10/keyedit.c:4210
msgid "Enter the notation: "
msgstr "請輸入註記: "
#: g10/keyedit.c:4359
msgid "Proceed? (y/N) "
msgstr "是否繼續? (y/N) "
#: g10/keyedit.c:4423
#, c-format
msgid "No user ID with index %d\n"
msgstr "索引 %d 沒有對應到使用者 ID\n"
#: g10/keyedit.c:4481
#, c-format
msgid "No user ID with hash %s\n"
msgstr "雜湊 %s 沒有對應到使用者 ID\n"
#: g10/keyedit.c:4508
#, c-format
msgid "No subkey with index %d\n"
msgstr "索引 %d 沒有對應到子鑰\n"
#: g10/keyedit.c:4643
#, c-format
msgid "user ID: \"%s\"\n"
msgstr "使用者 ID: \"%s\"\n"
#: g10/keyedit.c:4646 g10/keyedit.c:4710 g10/keyedit.c:4753
#, c-format
msgid "signed by your key %s on %s%s%s\n"
msgstr "已被你的金鑰 %s 於 %s%s%s 所簽署\n"
#: g10/keyedit.c:4648 g10/keyedit.c:4712 g10/keyedit.c:4755
msgid " (non-exportable)"
msgstr " (不可匯出)"
#: g10/keyedit.c:4652
#, c-format
msgid "This signature expired on %s.\n"
msgstr "這份簽章已經在 %s 過期了.\n"
#: g10/keyedit.c:4656
msgid "Are you sure you still want to revoke it? (y/N) "
msgstr "你確定仍然想要撤銷它嗎? (y/N) "
#: g10/keyedit.c:4660
msgid "Create a revocation certificate for this signature? (y/N) "
msgstr "要為這份簽章建立一份撤銷憑證嗎? (y/N) "
#: g10/keyedit.c:4687
#, c-format
msgid "You have signed these user IDs on key %s:\n"
msgstr "你已經簽署了金鑰 %s 上的這些使用者 ID:\n"
#: g10/keyedit.c:4713
msgid " (non-revocable)"
msgstr " (不可撤銷)"
#: g10/keyedit.c:4720
#, c-format
msgid "revoked by your key %s on %s\n"
msgstr "被你的金鑰 %s 於 %s 所撤銷了\n"
#: g10/keyedit.c:4742
msgid "You are about to revoke these signatures:\n"
msgstr "你正要撤銷這些簽章:\n"
#: g10/keyedit.c:4762
msgid "Really create the revocation certificates? (y/N) "
msgstr "真的要建立撤銷憑證嗎? (y/N) "
#: g10/keyedit.c:4792
msgid "no secret key\n"
msgstr "沒有私鑰\n"
#: g10/keyedit.c:4862
#, c-format
msgid "user ID \"%s\" is already revoked\n"
msgstr "使用者 ID \"%s\" 已撤銷\n"
#: g10/keyedit.c:4879
#, c-format
msgid "WARNING: a user ID signature is dated %d seconds in the future\n"
msgstr "警告: 有一份使用者 ID 的簽章日期為 %d 秒後的未來\n"
#: g10/keyedit.c:4943
#, c-format
msgid "Key %s is already revoked.\n"
msgstr "金鑰 %s 已撤銷.\n"
#: g10/keyedit.c:5005
#, c-format
msgid "Subkey %s is already revoked.\n"
msgstr "子鑰 %s 已撤銷.\n"
#: g10/keyedit.c:5100
#, c-format
msgid "Displaying %s photo ID of size %ld for key %s (uid %d)\n"
msgstr "正在顯示 %s 照片 ID, 其尺寸為 %ld, 屬於金鑰 %s (uid %d) 的照片\n"
#: g10/keygen.c:268
#, c-format
msgid "preference `%s' duplicated\n"
msgstr "偏好設定 `%s' 重複了\n"
#: g10/keygen.c:275
msgid "too many cipher preferences\n"
msgstr "編密偏好過多\n"
#: g10/keygen.c:277
msgid "too many digest preferences\n"
msgstr "摘要偏好過多\n"
#: g10/keygen.c:279
msgid "too many compression preferences\n"
msgstr "壓縮偏好過多\n"
#: g10/keygen.c:404
#, c-format
msgid "invalid item `%s' in preference string\n"
msgstr "偏好字串中含有無效的 `%s' 項目\n"
#: g10/keygen.c:884
msgid "writing direct signature\n"
msgstr "寫入直接簽章中\n"
#: g10/keygen.c:926
msgid "writing self signature\n"
msgstr "寫入自我簽章中\n"
#: g10/keygen.c:983
msgid "writing key binding signature\n"
msgstr "寫入附鑰簽章中\n"
#: g10/keygen.c:1151 g10/keygen.c:1262 g10/keygen.c:1267 g10/keygen.c:1402
#: g10/keygen.c:3030
#, c-format
msgid "keysize invalid; using %u bits\n"
msgstr "金鑰尺寸無效; 改用 %u 位元\n"
#: g10/keygen.c:1157 g10/keygen.c:1273 g10/keygen.c:1408 g10/keygen.c:3036
#, c-format
msgid "keysize rounded up to %u bits\n"
msgstr "金鑰尺寸增大到 %u 位元\n"
#: g10/keygen.c:1299
msgid ""
"WARNING: some OpenPGP programs can't handle a DSA key with this digest size\n"
msgstr "警告: 某些 OpenPGP 程式無法處理具有此摘要尺寸的 DSA 金鑰\n"
#: g10/keygen.c:1519
msgid "Sign"
msgstr "簽署"
#: g10/keygen.c:1522
msgid "Certify"
msgstr "保證"
#: g10/keygen.c:1525
msgid "Encrypt"
msgstr "加密"
#: g10/keygen.c:1528
msgid "Authenticate"
msgstr "鑑定"
#. TRANSLATORS: Please use only plain ASCII characters for the
#. translation. If this is not possible use single digits. The
#. string needs to 8 bytes long. Here is a description of the
#. functions:
#.
#. s = Toggle signing capability
#. e = Toggle encryption capability
#. a = Toggle authentication capability
#. q = Finish
#.
#: g10/keygen.c:1546
msgid "SsEeAaQq"
msgstr "SsEeAaQq"
#: g10/keygen.c:1569
#, c-format
msgid "Possible actions for a %s key: "
msgstr "%s 金鑰可能的動作: "
#: g10/keygen.c:1573
msgid "Current allowed actions: "
msgstr "目前可進行的動作: "
#: g10/keygen.c:1578
#, c-format
msgid " (%c) Toggle the sign capability\n"
msgstr " (%c) 切換簽署性能\n"
#: g10/keygen.c:1581
#, c-format
msgid " (%c) Toggle the encrypt capability\n"
msgstr " (%c) 切換加密性能\n"
#: g10/keygen.c:1584
#, c-format
msgid " (%c) Toggle the authenticate capability\n"
msgstr " (%c) 切換鑑定性能\n"
#: g10/keygen.c:1587
#, c-format
msgid " (%c) Finished\n"
msgstr " (%c) 已完成\n"
#: g10/keygen.c:1643 sm/certreqgen-ui.c:121
msgid "Please select what kind of key you want:\n"
msgstr "請選擇你要使用的金鑰種類:\n"
#: g10/keygen.c:1645
#, c-format
msgid " (%d) DSA and Elgamal (default)\n"
msgstr " (%d) DSA 和 Elgamal (預設)\n"
#: g10/keygen.c:1646
#, c-format
msgid " (%d) DSA (sign only)\n"
msgstr " (%d) DSA (僅能用於簽署)\n"
#: g10/keygen.c:1648
#, c-format
msgid " (%d) DSA (set your own capabilities)\n"
msgstr " (%d) DSA (你能自己設定性能)\n"
#: g10/keygen.c:1650
#, c-format
msgid " (%d) Elgamal (encrypt only)\n"
msgstr " (%d) Elgamal (僅能用於加密)\n"
#: g10/keygen.c:1651
#, c-format
msgid " (%d) RSA (sign only)\n"
msgstr " (%d) RSA (僅能用於簽署)\n"
#: g10/keygen.c:1653
#, c-format
msgid " (%d) RSA (encrypt only)\n"
msgstr " (%d) RSA (僅能用於加密)\n"
#: g10/keygen.c:1655
#, c-format
msgid " (%d) RSA (set your own capabilities)\n"
msgstr " (%d) RSA (你能自己設定性能)\n"
#: g10/keygen.c:1724
#, c-format
msgid "DSA keypair will have %u bits.\n"
msgstr "DSA 金鑰對會有 %u 位元長.\n"
#: g10/keygen.c:1734
#, c-format
msgid "%s keys may be between %u and %u bits long.\n"
msgstr "%s 金鑰的長度可能介於 %u 位元和 %u 位元之間.\n"
#: g10/keygen.c:1741 sm/certreqgen-ui.c:142
#, c-format
msgid "What keysize do you want? (%u) "
msgstr "你想要用多大的金鑰尺寸? (%u) "
#: g10/keygen.c:1755 sm/certreqgen-ui.c:147
#, c-format
msgid "%s keysizes must be in the range %u-%u\n"
msgstr "%s 金鑰尺寸一定要介於 %u 到 %u 之間\n"
#: g10/keygen.c:1761 sm/certreqgen-ui.c:152
#, c-format
msgid "Requested keysize is %u bits\n"
msgstr "你所要求的金鑰尺寸是 %u 位元\n"
#: g10/keygen.c:1766 g10/keygen.c:1771 sm/certreqgen-ui.c:157
#, c-format
msgid "rounded up to %u bits\n"
msgstr "加大到 %u 位元\n"
#: g10/keygen.c:1840
msgid ""
"Please specify how long the key should be valid.\n"
" 0 = key does not expire\n"
" <n> = key expires in n days\n"
" <n>w = key expires in n weeks\n"
" <n>m = key expires in n months\n"
" <n>y = key expires in n years\n"
msgstr ""
"請指定這把金鑰的有效期限是多久.\n"
" 0 = 金鑰不會過期\n"
" <n> = 金鑰在 n 天後會到期\n"
" <n>w = 金鑰在 n 週後會到期\n"
" <n>m = 金鑰在 n 月後會到期\n"
" <n>y = 金鑰在 n 年後會到期\n"
#: g10/keygen.c:1851
msgid ""
"Please specify how long the signature should be valid.\n"
" 0 = signature does not expire\n"
" <n> = signature expires in n days\n"
" <n>w = signature expires in n weeks\n"
" <n>m = signature expires in n months\n"
" <n>y = signature expires in n years\n"
msgstr ""
"請指定這份簽章的有效期限是多久.\n"
" 0 = 簽章不會過期\n"
" <n> = 簽章在 n 天後會到期\n"
" <n>w = 簽章在 n 週後會到期\n"
" <n>m = 簽章在 n 月後會到期\n"
" <n>y = 簽章在 n 年後會到期\n"
#: g10/keygen.c:1874
msgid "Key is valid for? (0) "
msgstr "金鑰的有效期限是多久? (0) "
#: g10/keygen.c:1879
#, c-format
msgid "Signature is valid for? (%s) "
msgstr "簽章的有效期限是多久? (%s) "
#: g10/keygen.c:1897
msgid "invalid value\n"
msgstr "無效的數值\n"
#: g10/keygen.c:1904
msgid "Key does not expire at all\n"
msgstr "金鑰完全不會過期\n"
#: g10/keygen.c:1905
msgid "Signature does not expire at all\n"
msgstr "簽章完全不會過期\n"
#: g10/keygen.c:1910
#, c-format
msgid "Key expires at %s\n"
msgstr "金鑰將會在 %s 到期\n"
#: g10/keygen.c:1911
#, c-format
msgid "Signature expires at %s\n"
msgstr "簽章將會在 %s 到期.\n"
#: g10/keygen.c:1915
msgid ""
"Your system can't display dates beyond 2038.\n"
"However, it will be correctly handled up to 2106.\n"
msgstr ""
"你的系統無法顯示 2038 年以後的日期.\n"
"不過, 它可以正確處理直到 2106 年之前的年份.\n"
#: g10/keygen.c:1922
msgid "Is this correct? (y/N) "
msgstr "以上正確嗎? (y/N) "
#: g10/keygen.c:1945
msgid ""
"\n"
"You need a user ID to identify your key; the software constructs the user "
"ID\n"
"from the Real Name, Comment and Email Address in this form:\n"
" \"Heinrich Heine (Der Dichter) <heinrichh@duesseldorf.de>\"\n"
"\n"
msgstr ""
"\n"
"你需要一個使用者 ID 來辨識你的金鑰; 這個軟體會用真實姓名,\n"
"註釋和電子郵件地址組合成使用者 ID 如下:\n"
" \"Ke-Huan Lin (Jedi) <Jedi@Jedi.org>\"\n"
"\n"
#: g10/keygen.c:1958
msgid "Real name: "
msgstr "真實姓名: "
#: g10/keygen.c:1966
msgid "Invalid character in name\n"
msgstr "姓名含有無效的字符\n"
#: g10/keygen.c:1968
msgid "Name may not start with a digit\n"
msgstr "姓名不可以用數字開頭\n"
#: g10/keygen.c:1970
msgid "Name must be at least 5 characters long\n"
msgstr "姓名至少要有五個字符長\n"
#: g10/keygen.c:1978
msgid "Email address: "
msgstr "電子郵件地址: "
#: g10/keygen.c:1984
msgid "Not a valid email address\n"
msgstr "不是有效的電子郵件地址\n"
#: g10/keygen.c:1992
msgid "Comment: "
msgstr "註釋: "
#: g10/keygen.c:1998
msgid "Invalid character in comment\n"
msgstr "註釋含有無效的字符\n"
#: g10/keygen.c:2020
#, c-format
msgid "You are using the `%s' character set.\n"
msgstr "你正在使用 `%s' 字元集.\n"
#: g10/keygen.c:2026
#, c-format
msgid ""
"You selected this USER-ID:\n"
" \"%s\"\n"
"\n"
msgstr ""
"你選擇了這個使用者 ID:\n"
" \"%s\"\n"
"\n"
#: g10/keygen.c:2031
msgid "Please don't put the email address into the real name or the comment\n"
msgstr "請不要把電子郵件地址放進你的真實姓名或註釋裡\n"
#. TRANSLATORS: These are the allowed answers in
#. lower and uppercase. Below you will find the matching
#. string which should be translated accordingly and the
#. letter changed to match the one in the answer string.
#.
#. n = Change name
#. c = Change comment
#. e = Change email
#. o = Okay (ready, continue)
#. q = Quit
#.
#: g10/keygen.c:2047
msgid "NnCcEeOoQq"
msgstr "NnCcEeOoQq"
#: g10/keygen.c:2057
msgid "Change (N)ame, (C)omment, (E)mail or (Q)uit? "
msgstr "變更姓名(N), 註釋(C), 電子郵件地址(E)或退出(Q)? "
#: g10/keygen.c:2058
msgid "Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? "
msgstr "變更姓名(N), 註釋(C), 電子郵件地址(E)或確定(O)/退出(Q)? "
#: g10/keygen.c:2077
msgid "Please correct the error first\n"
msgstr "請先訂正錯誤\n"
#: g10/keygen.c:2116
msgid ""
"You need a Passphrase to protect your secret key.\n"
"\n"
msgstr ""
"你需要一個密語來保護你的私鑰.\n"
"\n"
#: g10/keygen.c:2131
#, c-format
msgid "%s.\n"
msgstr "%s.\n"
#: g10/keygen.c:2137
msgid ""
"You don't want a passphrase - this is probably a *bad* idea!\n"
"I will do it anyway. You can change your passphrase at any time,\n"
"using this program with the option \"--edit-key\".\n"
"\n"
msgstr ""
"你不想要有密語 - 這個想法實在是 **遭透了**!\n"
"我仍然會照你想的去做. 你任何時候都可以變更你的密語,\n"
"僅需要再次執行這個程式, 並且使用 \"--edit-key\" 選項即可.\n"
"\n"
#: g10/keygen.c:2161
msgid ""
"We need to generate a lot of random bytes. It is a good idea to perform\n"
"some other action (type on the keyboard, move the mouse, utilize the\n"
"disks) during the prime generation; this gives the random number\n"
"generator a better chance to gain enough entropy.\n"
msgstr ""
"我們需要產生大量的隨機位元組. 這個時候你可以多做一些事情\n"
"(像是敲打鍵盤, 移動滑鼠, 讀寫硬碟之類的)\n"
"這會讓隨機數字產生器有更多的機會獲得夠多的亂數.\n"
#: g10/keygen.c:2970 g10/keygen.c:2997
msgid "Key generation canceled.\n"
msgstr "金鑰產生已取消.\n"
#: g10/keygen.c:3202 g10/keygen.c:3369
#, c-format
msgid "writing public key to `%s'\n"
msgstr "正在寫入公鑰至 `%s'\n"
#: g10/keygen.c:3204 g10/keygen.c:3372
#, c-format
msgid "writing secret key stub to `%s'\n"
msgstr "正在寫入私鑰 stub 至 `%s'\n"
#: g10/keygen.c:3207 g10/keygen.c:3375
#, c-format
msgid "writing secret key to `%s'\n"
msgstr "正在寫入私鑰至 `%s'\n"
#: g10/keygen.c:3356
#, c-format
msgid "no writable public keyring found: %s\n"
msgstr "找不到可寫入的公鑰鑰匙圈: %s\n"
#: g10/keygen.c:3363
#, c-format
msgid "no writable secret keyring found: %s\n"
msgstr "找不到可寫入的私鑰鑰匙圈: %s\n"
#: g10/keygen.c:3383
#, c-format
msgid "error writing public keyring `%s': %s\n"
msgstr "寫入公鑰鑰匙圈 `%s' 時出錯: %s\n"
#: g10/keygen.c:3391
#, c-format
msgid "error writing secret keyring `%s': %s\n"
msgstr "寫入私鑰鑰匙圈 `%s' 時出錯: %s\n"
#: g10/keygen.c:3418
msgid "public and secret key created and signed.\n"
msgstr "公鑰和私鑰已建立及簽署.\n"
#: g10/keygen.c:3429
msgid ""
"Note that this key cannot be used for encryption. You may want to use\n"
"the command \"--edit-key\" to generate a subkey for this purpose.\n"
msgstr ""
"請注意這把金鑰不能用於加密. 也許你會想藉由 \"--edit-key\" 指令\n"
"來產生加密用的子鑰.\n"
#: g10/keygen.c:3442 g10/keygen.c:3587 g10/keygen.c:3708
#, c-format
msgid "Key generation failed: %s\n"
msgstr "產生金鑰失敗: %s\n"
#: g10/keygen.c:3497 g10/keygen.c:3638 g10/sign.c:241
#, c-format
msgid ""
"key has been created %lu second in future (time warp or clock problem)\n"
msgstr "金鑰已經在 %lu 秒後的未來製妥 (可能是因為時光旅行或時鐘的問題)\n"
#: g10/keygen.c:3499 g10/keygen.c:3640 g10/sign.c:243
#, c-format
msgid ""
"key has been created %lu seconds in future (time warp or clock problem)\n"
msgstr "金鑰已經在 %lu 秒後的未來製妥 (可能是因為時光旅行或時鐘的問題)\n"
#: g10/keygen.c:3510 g10/keygen.c:3651
msgid "NOTE: creating subkeys for v3 keys is not OpenPGP compliant\n"
msgstr "請注意: 對 v3 金鑰製造子鑰會失去 OpenPGP 相容性\n"
#: g10/keygen.c:3551 g10/keygen.c:3684
msgid "Really create? (y/N) "
msgstr "真的要建立嗎? (y/N) "
#: g10/keygen.c:3857
#, c-format
msgid "storing key onto card failed: %s\n"
msgstr "儲存金鑰到卡片上時失敗: %s\n"
#: g10/keygen.c:3905
#, c-format
msgid "can't create backup file `%s': %s\n"
msgstr "無法建立備份檔案 `%s': %s\n"
#: g10/keygen.c:3931
#, c-format
msgid "NOTE: backup of card key saved to `%s'\n"
msgstr "請注意: 卡片金鑰的備份已儲存至 `%s'\n"
#: g10/keyid.c:538 g10/keyid.c:550 g10/keyid.c:562 g10/keyid.c:574
msgid "never "
msgstr "永遠不過期"
#: g10/keylist.c:263
msgid "Critical signature policy: "
msgstr "關鍵簽章原則: "
#: g10/keylist.c:265
msgid "Signature policy: "
msgstr "簽章原則: "
#: g10/keylist.c:304
msgid "Critical preferred keyserver: "
msgstr "執意偏好的金鑰伺服器: "
#: g10/keylist.c:357
msgid "Critical signature notation: "
msgstr "關鍵簽章註記: "
#: g10/keylist.c:359
msgid "Signature notation: "
msgstr "簽章註記: "
#: g10/keylist.c:469
msgid "Keyring"
msgstr "鑰匙圈"
#: g10/keylist.c:1504
msgid "Primary key fingerprint:"
msgstr " 主鑰指紋:"
#: g10/keylist.c:1506
msgid " Subkey fingerprint:"
msgstr " 子鑰指紋:"
#. TRANSLATORS: this should fit into 24 bytes to that the
#. * fingerprint data is properly aligned with the user ID
#: g10/keylist.c:1513
msgid " Primary key fingerprint:"
msgstr " 主鑰指紋:"
#: g10/keylist.c:1515
msgid " Subkey fingerprint:"
msgstr " 子鑰指紋:"
# use tty
#: g10/keylist.c:1519 g10/keylist.c:1523
msgid " Key fingerprint ="
msgstr " 金鑰指紋 ="
#: g10/keylist.c:1590
msgid " Card serial no. ="
msgstr " 卡片序號 ="
#: g10/keyring.c:1249
#, c-format
msgid "renaming `%s' to `%s' failed: %s\n"
msgstr "把 `%s' 重新新命成 `%s' 時失敗: %s\n"
#: g10/keyring.c:1254
msgid "WARNING: 2 files with confidential information exists.\n"
msgstr "警告: 2 個檔案存在有互相矛盾的資訊.\n"
#: g10/keyring.c:1256
#, c-format
msgid "%s is the unchanged one\n"
msgstr "%s 是沒有改變的那一個\n"
#: g10/keyring.c:1257
#, c-format
msgid "%s is the new one\n"
msgstr "%s 是新的那一個\n"
#: g10/keyring.c:1258
msgid "Please fix this possible security flaw\n"
msgstr "請修補這個可能的安全漏洞\n"
#: g10/keyring.c:1380
#, c-format
msgid "caching keyring `%s'\n"
msgstr "快取鑰匙圈 `%s' 中\n"
#: g10/keyring.c:1426
#, c-format
msgid "%lu keys cached so far (%lu signatures)\n"
msgstr "目前已檢查 %lu 把金鑰 (共 %lu 份簽章)\n"
#: g10/keyring.c:1438
#, c-format
msgid "%lu keys cached (%lu signatures)\n"
msgstr "已檢查 %lu 把金鑰 (共 %lu 份簽章)\n"
#: g10/keyring.c:1510
#, c-format
msgid "%s: keyring created\n"
msgstr "%s: 鑰匙圈已建立\n"
#: g10/keyserver.c:71
msgid "include revoked keys in search results"
msgstr "在搜尋結果中也包含已撤銷的金鑰"
#: g10/keyserver.c:72
msgid "include subkeys when searching by key ID"
msgstr "以金鑰 ID 搜尋時也搜尋子鑰"
#: g10/keyserver.c:74
msgid "use temporary files to pass data to keyserver helpers"
msgstr "用暫存檔來將資料遞送給金鑰伺服器協助程式"
#: g10/keyserver.c:76
msgid "do not delete temporary files after using them"
msgstr "使用暫存檔後不要加以刪除"
#: g10/keyserver.c:80
msgid "automatically retrieve keys when verifying signatures"
msgstr "驗證簽章時自動取回金鑰"
#: g10/keyserver.c:82
msgid "honor the preferred keyserver URL set on the key"
msgstr "尊重金鑰上所設定的偏好金鑰伺服器 URL"
#: g10/keyserver.c:84
msgid "honor the PKA record set on a key when retrieving keys"
msgstr "取回金鑰時尊重金鑰所設定的 PKA 記錄"
#: g10/keyserver.c:150
#, c-format
msgid "WARNING: keyserver option `%s' is not used on this platform\n"
msgstr "警告: 金鑰伺服器選項 `%s' 並未用於此平台\n"
#: g10/keyserver.c:533
msgid "disabled"
msgstr "已停用"
#: g10/keyserver.c:734
msgid "Enter number(s), N)ext, or Q)uit > "
msgstr "請輸入數字, N)下一頁, 或 Q)離開 > "
#: g10/keyserver.c:818 g10/keyserver.c:1440
#, c-format
msgid "invalid keyserver protocol (us %d!=handler %d)\n"
msgstr "無效的金鑰伺服器協定 (我們用 %d!=經手程式 %d)\n"
#: g10/keyserver.c:916
#, c-format
msgid "key \"%s\" not found on keyserver\n"
msgstr "在金鑰伺服器上找不到金鑰 \"%s\"\n"
#: g10/keyserver.c:918
msgid "key not found on keyserver\n"
msgstr "在金鑰伺服器上找不到金鑰\n"
#: g10/keyserver.c:1159
#, c-format
msgid "requesting key %s from %s server %s\n"
msgstr "正在請求金鑰 %s 自 %s 伺服器 %s\n"
#: g10/keyserver.c:1163
#, c-format
msgid "requesting key %s from %s\n"
msgstr "正在請求金鑰 %s 自 %s\n"
#: g10/keyserver.c:1187
#, c-format
msgid "searching for names from %s server %s\n"
msgstr "正在從 %s 伺服器 %s 搜尋名字\n"
#: g10/keyserver.c:1190
#, c-format
msgid "searching for names from %s\n"
msgstr "正在從 %s 搜尋名字\n"
#: g10/keyserver.c:1343
#, c-format
msgid "sending key %s to %s server %s\n"
msgstr "遞送金鑰 %s 至 %s 伺服器 %s\n"
#: g10/keyserver.c:1347
#, c-format
msgid "sending key %s to %s\n"
msgstr "遞送金鑰 %s 至 %s\n"
#: g10/keyserver.c:1390
#, c-format
msgid "searching for \"%s\" from %s server %s\n"
msgstr "正在搜尋 \"%s\" 於 %s 伺服器 %s\n"
#: g10/keyserver.c:1393
#, c-format
msgid "searching for \"%s\" from %s\n"
msgstr "正在搜尋 \"%s\" 於 %s\n"
#: g10/keyserver.c:1400 g10/keyserver.c:1496
msgid "no keyserver action!\n"
msgstr "沒有金鑰伺服器動作!\n"
#: g10/keyserver.c:1448
#, c-format
msgid "WARNING: keyserver handler from a different version of GnuPG (%s)\n"
msgstr "警告: 金鑰伺服器經手程式係來自不同版本的 GnuPG (%s)\n"
#: g10/keyserver.c:1457
msgid "keyserver did not send VERSION\n"
msgstr "金鑰伺服器並未送出版本 (VERSION)\n"
#: g10/keyserver.c:1519 g10/keyserver.c:2047
msgid "no keyserver known (use option --keyserver)\n"
msgstr "沒有已知的金鑰伺服器 (使用 --keyserver 選項)\n"
#: g10/keyserver.c:1525
msgid "external keyserver calls are not supported in this build\n"
msgstr "本版並不支援外部金鑰伺服器叫用\n"
#: g10/keyserver.c:1537
#, c-format
msgid "no handler for keyserver scheme `%s'\n"
msgstr "沒有 `%s' 金鑰伺服器架構的經手程式\n"
#: g10/keyserver.c:1542
#, c-format
msgid "action `%s' not supported with keyserver scheme `%s'\n"
msgstr "`%s' 動作在 `%s' 金鑰伺服器架構中未支援\n"
#: g10/keyserver.c:1550
#, c-format
msgid "%s does not support handler version %d\n"
msgstr "%s 並不支援第 %d 版經手程式\n"
#: g10/keyserver.c:1557
msgid "keyserver timed out\n"
msgstr "金鑰伺服器逾時\n"
#: g10/keyserver.c:1562
msgid "keyserver internal error\n"
msgstr "金鑰伺服器內部錯誤\n"
#: g10/keyserver.c:1571
#, c-format
msgid "keyserver communications error: %s\n"
msgstr "金鑰伺服器通訊錯誤: %s\n"
#: g10/keyserver.c:1596 g10/keyserver.c:1630
#, c-format
msgid "\"%s\" not a key ID: skipping\n"
msgstr "\"%s\" 並非金鑰 ID: 跳過中\n"
#: g10/keyserver.c:1889
#, c-format
msgid "WARNING: unable to refresh key %s via %s: %s\n"
msgstr "警告: 無法更新金鑰 %s 於 %s: %s\n"
#: g10/keyserver.c:1911
#, c-format
msgid "refreshing 1 key from %s\n"
msgstr "更新 1 份金鑰中 (從 %s )\n"
#: g10/keyserver.c:1913
#, c-format
msgid "refreshing %d keys from %s\n"
msgstr "更新 %d 份金鑰中 (從 %s )\n"
#: g10/keyserver.c:1969
#, c-format
msgid "WARNING: unable to fetch URI %s: %s\n"
msgstr "警告: 無法抓取 URI %s: %s\n"
#: g10/keyserver.c:1975
#, c-format
msgid "WARNING: unable to parse URI %s\n"
msgstr "警告: 無法剖析 URI %s\n"
#: g10/mainproc.c:231
#, c-format
msgid "weird size for an encrypted session key (%d)\n"
msgstr "加密過的階段金鑰 (%d) 尺寸詭異\n"
#: g10/mainproc.c:284
#, c-format
msgid "%s encrypted session key\n"
msgstr "%s 加密過的階段金鑰\n"
#: g10/mainproc.c:294
#, c-format
msgid "passphrase generated with unknown digest algorithm %d\n"
msgstr "密語係以未知的 %d 摘要演算法所產生\n"
#: g10/mainproc.c:360
#, c-format
msgid "public key is %s\n"
msgstr "公鑰為 %s\n"
#: g10/mainproc.c:423
msgid "public key encrypted data: good DEK\n"
msgstr "公鑰加密過的資料: 完好的 DEK\n"
#: g10/mainproc.c:456
#, c-format
msgid "encrypted with %u-bit %s key, ID %s, created %s\n"
msgstr "已用 %u 位元長的 %s 金鑰, ID %s, 建立於 %s 所加密\n"
#: g10/mainproc.c:460 g10/pkclist.c:217
#, c-format
msgid " \"%s\"\n"
msgstr " \"%s\"\n"
#: g10/mainproc.c:464
#, c-format
msgid "encrypted with %s key, ID %s\n"
msgstr "已用 %s 金鑰, ID %s 所加密\n"
#: g10/mainproc.c:478
#, c-format
msgid "public key decryption failed: %s\n"
msgstr "公鑰解密失敗: %s\n"
#: g10/mainproc.c:492
#, c-format
msgid "encrypted with %lu passphrases\n"
msgstr "已用 %lu 個密語加密了\n"
#: g10/mainproc.c:494
msgid "encrypted with 1 passphrase\n"
msgstr "已用 1 個密語加密了\n"
#: g10/mainproc.c:526 g10/mainproc.c:548
#, c-format
msgid "assuming %s encrypted data\n"
msgstr "假定 %s 為加密過的資料\n"
#: g10/mainproc.c:534
#, c-format
msgid "IDEA cipher unavailable, optimistically attempting to use %s instead\n"
msgstr "IDEA 編密法不可用, 我們樂觀地試著改以 %s 代替\n"
#: g10/mainproc.c:567
msgid "decryption okay\n"
msgstr "解密成功\n"
#: g10/mainproc.c:571
msgid "WARNING: message was not integrity protected\n"
msgstr "警告: 訊息未受到完整的保護\n"
#: g10/mainproc.c:584
msgid "WARNING: encrypted message has been manipulated!\n"
msgstr "警告: 加密過的訊息已經被變造了!\n"
#: g10/mainproc.c:590
#, c-format
msgid "decryption failed: %s\n"
msgstr "解密失敗: %s\n"
#: g10/mainproc.c:611
msgid "NOTE: sender requested \"for-your-eyes-only\"\n"
msgstr "請注意: 寄件者要求了 \"你應該祇用眼睛看\"\n"
#: g10/mainproc.c:613
#, c-format
msgid "original file name='%.*s'\n"
msgstr "原始的檔名 ='%.*s'\n"
#: g10/mainproc.c:701
msgid "WARNING: multiple plaintexts seen\n"
msgstr "警告: 看到了多份明文\n"
#: g10/mainproc.c:842
msgid "standalone revocation - use \"gpg --import\" to apply\n"
msgstr "獨立撤銷 - 請用 \"gpg --import\" 來套用\n"
#: g10/mainproc.c:1195 g10/mainproc.c:1232
msgid "no signature found\n"
msgstr "找不到簽章\n"
#: g10/mainproc.c:1470
msgid "signature verification suppressed\n"
msgstr "簽章驗證已抑制\n"
#: g10/mainproc.c:1579
msgid "can't handle this ambiguous signature data\n"
msgstr "無法處理這個不明確的簽章資料\n"
#: g10/mainproc.c:1590
#, c-format
msgid "Signature made %s\n"
msgstr "由 %s 建立的簽章\n"
#: g10/mainproc.c:1591
#, c-format
msgid " using %s key %s\n"
msgstr " 使用 %s 金鑰 %s\n"
#: g10/mainproc.c:1595
#, c-format
msgid "Signature made %s using %s key ID %s\n"
msgstr "由 %s 建立的簽章, 使用 %s 金鑰 ID %s\n"
#: g10/mainproc.c:1615
msgid "Key available at: "
msgstr "可用的金鑰於: "
#: g10/mainproc.c:1748 g10/mainproc.c:1796
#, c-format
msgid "BAD signature from \"%s\""
msgstr "*損壞* 的簽章來自於 \"%s\""
#: g10/mainproc.c:1750 g10/mainproc.c:1798
#, c-format
msgid "Expired signature from \"%s\""
msgstr "過期的簽章來自於 \"%s\""
#: g10/mainproc.c:1752 g10/mainproc.c:1800
#, c-format
msgid "Good signature from \"%s\""
msgstr "完好的簽章來自於 \"%s\""
#: g10/mainproc.c:1802
msgid "[uncertain]"
msgstr "[ 不確定 ]"
#: g10/mainproc.c:1834
#, c-format
msgid " aka \"%s\""
msgstr " 亦即 \"%s\""
#: g10/mainproc.c:1932
#, c-format
msgid "Signature expired %s\n"
msgstr "這份簽署已經在 %s 過期了\n"
#: g10/mainproc.c:1937
#, c-format
msgid "Signature expires %s\n"
msgstr "這份簽署將在 %s 到期\n"
#: g10/mainproc.c:1940
#, c-format
msgid "%s signature, digest algorithm %s\n"
msgstr "%s 簽章, 摘要演算法 %s\n"
#: g10/mainproc.c:1941
msgid "binary"
msgstr "二進制"
#: g10/mainproc.c:1942
msgid "textmode"
msgstr "文字模式"
#: g10/mainproc.c:1942 g10/trustdb.c:525
msgid "unknown"
msgstr "未知"
#: g10/mainproc.c:1962
#, c-format
msgid "Can't check signature: %s\n"
msgstr "無法檢查簽章: %s\n"
#: g10/mainproc.c:2046 g10/mainproc.c:2062 g10/mainproc.c:2158
msgid "not a detached signature\n"
msgstr "不是一份分離的簽章\n"
#: g10/mainproc.c:2089
msgid ""
"WARNING: multiple signatures detected. Only the first will be checked.\n"
msgstr "警告: 偵測到多重簽章. 祇有第一個簽章纔會被核選.\n"
#: g10/mainproc.c:2097
#, c-format
msgid "standalone signature of class 0x%02x\n"
msgstr "等級 0x%02x 的獨立簽章\n"
#: g10/mainproc.c:2162
msgid "old style (PGP 2.x) signature\n"
msgstr "舊型 (PGP 2.x) 簽章\n"
#: g10/mainproc.c:2172
msgid "invalid root packet detected in proc_tree()\n"
msgstr "在 proc_tree() 中偵測到無效的 root 封包\n"
#: g10/misc.c:109 g10/misc.c:137 g10/misc.c:209
#, c-format
msgid "fstat of `%s' failed in %s: %s\n"
msgstr "`%s' 的 fstat 失敗於 %s: %s\n"
#: g10/misc.c:174
#, c-format
msgid "fstat(%d) failed in %s: %s\n"
msgstr "fstat(%d) 失敗於 %s: %s\n"
#: g10/misc.c:288
#, c-format
msgid "WARNING: using experimental public key algorithm %s\n"
msgstr "警告: 正在使用實驗性的 %s 公鑰演算法\n"
#: g10/misc.c:294
msgid "WARNING: Elgamal sign+encrypt keys are deprecated\n"
msgstr "警告: 已不建議使用 Elgamal 簽署暨加密金鑰\n"
#: g10/misc.c:307
#, c-format
msgid "WARNING: using experimental cipher algorithm %s\n"
msgstr "警告: 正在使用實驗性的 %s 編密演算法\n"
#: g10/misc.c:322
#, c-format
msgid "WARNING: using experimental digest algorithm %s\n"
msgstr "警告: 正在使用實驗性的 %s 摘要演算法\n"
#: g10/misc.c:327
#, c-format
msgid "WARNING: digest algorithm %s is deprecated\n"
msgstr "警告: 已不建議使用 %s 摘要演算法\n"
#: g10/misc.c:479
msgid "the IDEA cipher plugin is not present\n"
msgstr "IDEA 編密法外掛模組不存在\n"
#: g10/misc.c:480 g10/sig-check.c:107 jnlib/utf8conv.c:88
#, c-format
msgid "please see %s for more information\n"
msgstr "請參考 %s 上進一步的資訊\n"
#: g10/misc.c:715
#, c-format
msgid "%s:%d: deprecated option \"%s\"\n"
msgstr "%s:%d: 不建議使用的選項 \"%s\"\n"
#: g10/misc.c:719
#, c-format
msgid "WARNING: \"%s\" is a deprecated option\n"
msgstr "警告: 已不建議使用 \"%s\" 選項\n"
#: g10/misc.c:721
#, c-format
msgid "please use \"%s%s\" instead\n"
msgstr "請改以 \"%s%s\" 代替\n"
#: g10/misc.c:728
#, c-format
msgid "WARNING: \"%s\" is a deprecated command - do not use it\n"
msgstr "警告: \"%s\" 是個棄而不顧的指令 - 別再用了\n"
#: g10/misc.c:738
#, c-format
msgid "%s:%u: obsolete option \"%s\" - it has no effect\n"
msgstr "%s:%u: 廢棄的 \"%s\" 選項 - 沒有任何影響\n"
#: g10/misc.c:741
#, c-format
msgid "WARNING: \"%s\" is an obsolete option - it has no effect\n"
msgstr "警告: \"%s\" 是已廢棄的選項 - 沒有效果\n"
#: g10/misc.c:802
msgid "Uncompressed"
msgstr "未壓縮"
#. TRANSLATORS: See doc/TRANSLATE about this string.
#: g10/misc.c:827
msgid "uncompressed|none"
msgstr "uncompressed|none|未壓縮|無"
#: g10/misc.c:954
#, c-format
msgid "this message may not be usable by %s\n"
msgstr "這個訊息對 %s 來說無法使用\n"
#: g10/misc.c:1129
#, c-format
msgid "ambiguous option `%s'\n"
msgstr "不明確的 `%s' 選項\n"
#: g10/misc.c:1154
#, c-format
msgid "unknown option `%s'\n"
msgstr "未知的 `%s' 選項\n"
#: g10/openfile.c:89
#, c-format
msgid "File `%s' exists. "
msgstr "檔案 `%s' 已存在. "
#: g10/openfile.c:93
msgid "Overwrite? (y/N) "
msgstr "是否覆寫? (y/N) "
#: g10/openfile.c:126
#, c-format
msgid "%s: unknown suffix\n"
msgstr "%s: 未知的副檔名\n"
#: g10/openfile.c:150
msgid "Enter new filename"
msgstr "請輸入新的檔名"
#: g10/openfile.c:195
msgid "writing to stdout\n"
msgstr "寫到標準輸出中\n"
#: g10/openfile.c:316
#, c-format
msgid "assuming signed data in `%s'\n"
msgstr "假設被簽署的資料在 `%s'\n"
#: g10/openfile.c:395
#, c-format
msgid "new configuration file `%s' created\n"
msgstr "新的設定檔 `%s' 被建立了\n"
#: g10/openfile.c:397
#, c-format
msgid "WARNING: options in `%s' are not yet active during this run\n"
msgstr "警告: 在 `%s' 裡的選項於這次執行期間並沒有被啟用\n"
#: g10/parse-packet.c:191
#, c-format
msgid "can't handle public key algorithm %d\n"
msgstr "無法操作 %d 公開金鑰演算法\n"
#: g10/parse-packet.c:796
msgid "WARNING: potentially insecure symmetrically encrypted session key\n"
msgstr "警告: 可能並不安全的對稱式加密階段金鑰\n"
#: g10/parse-packet.c:1247
#, c-format
msgid "subpacket of type %d has critical bit set\n"
msgstr "%d 類別的子封包設定了關鍵位元\n"
#: g10/passphrase.c:295 g10/passphrase.c:581
#, c-format
msgid " (main key ID %s)"
msgstr " (主要金鑰 ID %s)"
#: g10/passphrase.c:309
#, c-format
msgid ""
"You need a passphrase to unlock the secret key for user:\n"
"\"%.*s\"\n"
"%u-bit %s key, ID %s, created %s%s\n"
msgstr ""
"你需要用密語來解開下列使用者的私鑰:\n"
"\"%.*s\"\n"
"%u 位元長的 %s 金鑰, ID %s, 建立於 %s%s\n"
#: g10/passphrase.c:334
msgid "Repeat passphrase\n"
msgstr "請再輸入一次密語\n"
#: g10/passphrase.c:336
msgid "Enter passphrase\n"
msgstr "請輸入密語\n"
#: g10/passphrase.c:363
msgid "cancelled by user\n"
msgstr "由使用者所取消\n"
#: g10/passphrase.c:369 g10/passphrase.c:428
#, c-format
msgid "problem with the agent: %s\n"
msgstr "代理程式的問題: %s\n"
#: g10/passphrase.c:560
#, c-format
msgid ""
"You need a passphrase to unlock the secret key for\n"
"user: \"%s\"\n"
msgstr ""
"你需要用密語來解開下列使用者的\n"
"私鑰: \"%s\"\n"
#: g10/passphrase.c:568
#, c-format
msgid "%u-bit %s key, ID %s, created %s"
msgstr "%u 位元長的 %s 金鑰, ID %s, 建立於 %s"
#: g10/passphrase.c:577
#, c-format
msgid " (subkey on main key ID %s)"
msgstr " (在主鑰 ID %s 上的子鑰)"
#: g10/photoid.c:72
msgid ""
"\n"
"Pick an image to use for your photo ID. The image must be a JPEG file.\n"
"Remember that the image is stored within your public key. If you use a\n"
"very large picture, your key will become very large as well!\n"
"Keeping the image close to 240x288 is a good size to use.\n"
msgstr ""
"\n"
"請挑選一張圖片來當成你的照片 ID. 這張圖片一定要是 JPEG 圖檔纔行.\n"
"請記住這張圖片會被存放在你的公鑰裡. 如果你挑了非常大的圖片的話,\n"
"你的金鑰也會變成非常地大!\n"
"盡量把圖片尺寸控制在 240x288 左右, 會是個非常理想的大小.\n"
#: g10/photoid.c:94
msgid "Enter JPEG filename for photo ID: "
msgstr "輸入要當作照片 ID 的 JPEG 檔名: "
#: g10/photoid.c:115
#, c-format
msgid "unable to open JPEG file `%s': %s\n"
msgstr "無法開啟 JPEG 圖檔 `%s': %s\n"
#: g10/photoid.c:126
#, c-format
msgid "This JPEG is really large (%d bytes) !\n"
msgstr "這個 JPEG 檔案真的很大 (%d 位元組) !\n"
#: g10/photoid.c:128
msgid "Are you sure you want to use it? (y/N) "
msgstr "你確定要用它嗎? (y/N) "
#: g10/photoid.c:145
#, c-format
msgid "`%s' is not a JPEG file\n"
msgstr "`%s' 不是一個 JPEG 圖檔\n"
#: g10/photoid.c:164
msgid "Is this photo correct (y/N/q)? "
msgstr "這張照片正確嗎? (y/N/q) "
#: g10/photoid.c:368
msgid "unable to display photo ID!\n"
msgstr "無法顯示照片 ID!\n"
#: g10/pkclist.c:60 g10/revoke.c:623
msgid "No reason specified"
msgstr "未指定原因"
#: g10/pkclist.c:62 g10/revoke.c:625
msgid "Key is superseded"
msgstr "金鑰被代換了"
#: g10/pkclist.c:64 g10/revoke.c:624
msgid "Key has been compromised"
msgstr "金鑰已經被洩漏了"
#: g10/pkclist.c:66 g10/revoke.c:626
msgid "Key is no longer used"
msgstr "金鑰不再被使用了"
#: g10/pkclist.c:68 g10/revoke.c:627
msgid "User ID is no longer valid"
msgstr "使用者 ID 不再有效了"
#: g10/pkclist.c:72
msgid "reason for revocation: "
msgstr "撤銷原因: "
#: g10/pkclist.c:89
msgid "revocation comment: "
msgstr "撤銷註釋: "
# a string with valid answers
#: g10/pkclist.c:204
msgid "iImMqQsS"
msgstr "iImMqQsS"
#: g10/pkclist.c:212
msgid "No trust value assigned to:\n"
msgstr "下列項目沒有對應的信任值:\n"
#: g10/pkclist.c:244
#, c-format
msgid " aka \"%s\"\n"
msgstr " 亦即 \"%s\"\n"
#: g10/pkclist.c:254
msgid ""
"How much do you trust that this key actually belongs to the named user?\n"
msgstr "你有多信任這把金鑰真的屬於叫這個名字的使用者?\n"
#: g10/pkclist.c:269
#, c-format
msgid " %d = I don't know or won't say\n"
msgstr " %d = 我不知道或不想說\n"
#: g10/pkclist.c:271
#, c-format
msgid " %d = I do NOT trust\n"
msgstr " %d = 我*不*信任\n"
#: g10/pkclist.c:277
#, c-format
msgid " %d = I trust ultimately\n"
msgstr " %d = 我徹底信任\n"
#: g10/pkclist.c:283
msgid " m = back to the main menu\n"
msgstr " m = 回到主選單\n"
#: g10/pkclist.c:286
msgid " s = skip this key\n"
msgstr " s = 跳過這把金鑰\n"
#: g10/pkclist.c:287
msgid " q = quit\n"
msgstr " q = 離開\n"
#: g10/pkclist.c:291
#, c-format
msgid ""
"The minimum trust level for this key is: %s\n"
"\n"
msgstr ""
"這把金鑰的最小信任等級為: %s\n"
"\n"
#: g10/pkclist.c:297 g10/revoke.c:652
msgid "Your decision? "
msgstr "你的決定是甚麼? "
#: g10/pkclist.c:318
msgid "Do you really want to set this key to ultimate trust? (y/N) "
msgstr "請問你是否真的想把這把金鑰設成徹底信任呢? (y/N) "
#: g10/pkclist.c:332
msgid "Certificates leading to an ultimately trusted key:\n"
msgstr "被徹底信任金鑰的憑證:\n"
#: g10/pkclist.c:417
#, c-format
msgid "%s: There is no assurance this key belongs to the named user\n"
msgstr "%s: 沒法保證這把金鑰真的屬於叫這個名字的使用者\n"
#: g10/pkclist.c:422
#, c-format
msgid "%s: There is limited assurance this key belongs to the named user\n"
msgstr "%s: 祇能有限的保證這把金鑰真的屬於叫這個名字的使用者\n"
#: g10/pkclist.c:428
msgid "This key probably belongs to the named user\n"
msgstr "這把金鑰很可能屬於叫這個名字的使用者\n"
#: g10/pkclist.c:433
msgid "This key belongs to us\n"
msgstr "這把金鑰是屬於我們自己的\n"
#: g10/pkclist.c:459
msgid ""
"It is NOT certain that the key belongs to the person named\n"
"in the user ID. If you *really* know what you are doing,\n"
"you may answer the next question with yes.\n"
msgstr ""
"這把金鑰並 *不* 確定屬於使用者 ID 裡的那個人.\n"
"除非你 **真的** 知道自己在做甚麼,\n"
"否則你最好在下一個問題回答 no\n"
#: g10/pkclist.c:478
msgid "Use this key anyway? (y/N) "
msgstr "無論如何還是使用這把金鑰嗎? (y/N) "
#: g10/pkclist.c:512
msgid "WARNING: Using untrusted key!\n"
msgstr "警告: 正在使用不被信任的金鑰!\n"
#: g10/pkclist.c:519
msgid "WARNING: this key might be revoked (revocation key not present)\n"
msgstr "警告: 這把金鑰可能已撤銷 (撤銷金鑰未出現)\n"
#: g10/pkclist.c:528
msgid "WARNING: This key has been revoked by its designated revoker!\n"
msgstr "警告: 這把金鑰已被指定撤銷者所撤銷!\n"
#: g10/pkclist.c:531
msgid "WARNING: This key has been revoked by its owner!\n"
msgstr "警告: 這把金鑰已被其持有人所撤銷!\n"
#: g10/pkclist.c:532
msgid " This could mean that the signature is forged.\n"
msgstr " 這很有可能表示此簽章是偽造的.\n"
#: g10/pkclist.c:538
msgid "WARNING: This subkey has been revoked by its owner!\n"
msgstr "警告: 這把子鑰已被其持有人所撤銷!\n"
#: g10/pkclist.c:543
msgid "Note: This key has been disabled.\n"
msgstr "請注意: 這把金鑰已停用.\n"
#: g10/pkclist.c:563
#, c-format
msgid "Note: Verified signer's address is `%s'\n"
msgstr "請注意: 已驗證的簽署者地址為 `%s'\n"
#: g10/pkclist.c:570
#, c-format
msgid "Note: Signer's address `%s' does not match DNS entry\n"
msgstr "請注意: 簽署者地址 `%s' 與 DNS 項目並不吻合\n"
#: g10/pkclist.c:582
msgid "trustlevel adjusted to FULL due to valid PKA info\n"
msgstr "信任等級因有效的 PKA 資訊而調整為 *完全*\n"
#: g10/pkclist.c:590
msgid "trustlevel adjusted to NEVER due to bad PKA info\n"
msgstr "信任等級因不良的 PKA 資訊而調整為 *永遠不會*\n"
#: g10/pkclist.c:601
msgid "Note: This key has expired!\n"
msgstr "請注意: 這把金鑰已經過期了!\n"
#: g10/pkclist.c:612
msgid "WARNING: This key is not certified with a trusted signature!\n"
msgstr "警告: 這把金鑰並非以受信任的簽章所認證!\n"
#: g10/pkclist.c:614
msgid ""
" There is no indication that the signature belongs to the owner.\n"
msgstr " 沒有證據指出這個簽章屬於這個持有者.\n"
#: g10/pkclist.c:622
msgid "WARNING: We do NOT trust this key!\n"
msgstr "警告: 我們 *不* 信任這把金鑰!\n"
#: g10/pkclist.c:623
msgid " The signature is probably a FORGERY.\n"
msgstr " 這個簽章很有可能是 *偽造的*.\n"
#: g10/pkclist.c:631
msgid ""
"WARNING: This key is not certified with sufficiently trusted signatures!\n"
msgstr "警告: 這把金鑰並非以足夠信任的簽章所認證!\n"
#: g10/pkclist.c:633
msgid " It is not certain that the signature belongs to the owner.\n"
msgstr " 這份簽章並不屬於這個持有者\n"
#: g10/pkclist.c:832 g10/pkclist.c:874 g10/pkclist.c:1086 g10/pkclist.c:1156
#, c-format
msgid "%s: skipped: %s\n"
msgstr "%s: 已跳過: %s\n"
#: g10/pkclist.c:844 g10/pkclist.c:1124
#, c-format
msgid "%s: skipped: public key already present\n"
msgstr "%s: 已跳過: 公鑰已存在\n"
#: g10/pkclist.c:895
msgid "You did not specify a user ID. (you may use \"-r\")\n"
msgstr "你沒有指定使用者 ID. (你可能得用 \"-r\")\n"
#: g10/pkclist.c:919
msgid "Current recipients:\n"
msgstr "目前的收件者:\n"
#: g10/pkclist.c:945
msgid ""
"\n"
"Enter the user ID. End with an empty line: "
msgstr ""
"\n"
"請輸入使用者 ID. 以空白列結束: "
#: g10/pkclist.c:970
msgid "No such user ID.\n"
msgstr "沒有這個使用者 ID.\n"
#: g10/pkclist.c:979 g10/pkclist.c:1053
msgid "skipped: public key already set as default recipient\n"
msgstr "已跳過: 公鑰已經被設成預設收件者\n"
#: g10/pkclist.c:1000
msgid "Public key is disabled.\n"
msgstr "公鑰已停用.\n"
#: g10/pkclist.c:1009
msgid "skipped: public key already set\n"
msgstr "已跳過: 公鑰已設過\n"
#: g10/pkclist.c:1044
#, c-format
msgid "unknown default recipient \"%s\"\n"
msgstr "未知的預設收件者 \"%s\"\n"
#: g10/pkclist.c:1102
#, c-format
msgid "%s: skipped: public key is disabled\n"
msgstr "%s: 已跳過: 公鑰已停用\n"
#: g10/pkclist.c:1164
msgid "no valid addressees\n"
msgstr "沒有有效的地址\n"
#: g10/pkclist.c:1478
#, c-format
msgid "Note: key %s has no %s feature\n"
msgstr "請注意: 金鑰 %s 沒有 %s 功能\n"
#: g10/pkclist.c:1503
#, c-format
msgid "Note: key %s has no preference for %s\n"
msgstr "警告: 金鑰 %s 沒有 %s 的偏好設定\n"
#: g10/plaintext.c:95
msgid "data not saved; use option \"--output\" to save it\n"
msgstr "資料未被儲存; 請用 \"--output\" 選項來儲存\n"
#: g10/plaintext.c:472
msgid "Detached signature.\n"
msgstr "分離的簽章.\n"
#: g10/plaintext.c:479
msgid "Please enter name of data file: "
msgstr "請輸入資料檔的名稱: "
#: g10/plaintext.c:511
msgid "reading stdin ...\n"
msgstr "正在讀取標準輸入中 ...\n"
#: g10/plaintext.c:549
msgid "no signed data\n"
msgstr "沒有被簽署過的資料\n"
#: g10/plaintext.c:565
#, c-format
msgid "can't open signed data `%s'\n"
msgstr "無法開啟被簽署過的資料 `%s'\n"
#: g10/plaintext.c:599
#, c-format
msgid "can't open signed data fd=%d: %s\n"
msgstr "無法開啟被簽署過的資料 fd=%d: %s\n"
#: g10/pubkey-enc.c:105
#, c-format
msgid "anonymous recipient; trying secret key %s ...\n"
msgstr "匿名收件者; 正在嘗試使用私鑰 %s ...\n"
#: g10/pubkey-enc.c:136
msgid "okay, we are the anonymous recipient.\n"
msgstr "很好, 我們就是匿名收件者.\n"
#: g10/pubkey-enc.c:225
msgid "old encoding of the DEK is not supported\n"
msgstr "不支援舊式的 DEK 編碼\n"
#: g10/pubkey-enc.c:246
#, c-format
msgid "cipher algorithm %d%s is unknown or disabled\n"
msgstr "%d%s 編密演算法未知或已停用\n"
#: g10/pubkey-enc.c:284
#, c-format
msgid "WARNING: cipher algorithm %s not found in recipient preferences\n"
msgstr "警告: 收件者偏好設定中找不到 %s 編密演算法\n"
#: g10/pubkey-enc.c:304
#, c-format
msgid "NOTE: secret key %s expired at %s\n"
msgstr "請注意: 私鑰 %s 在 %s 過期了\n"
#: g10/pubkey-enc.c:310
msgid "NOTE: key has been revoked"
msgstr "請注意: 金鑰已撤銷"
#: g10/revoke.c:102 g10/revoke.c:116 g10/revoke.c:128 g10/revoke.c:174
#: g10/revoke.c:186 g10/revoke.c:587
#, c-format
msgid "build_packet failed: %s\n"
msgstr "build_packet 失敗: %s\n"
#: g10/revoke.c:145
#, c-format
msgid "key %s has no user IDs\n"
msgstr "金鑰 %s 沒有使用者 ID\n"
#: g10/revoke.c:306
msgid "To be revoked by:\n"
msgstr "將被撤銷:\n"
#: g10/revoke.c:310
msgid "(This is a sensitive revocation key)\n"
msgstr "(這是把機密的撤銷金鑰)\n"
#: g10/revoke.c:314
msgid "Create a designated revocation certificate for this key? (y/N) "
msgstr "要為這把金鑰建立一份指定撤銷憑證嗎? (y/N) "
#: g10/revoke.c:327 g10/revoke.c:553
msgid "ASCII armored output forced.\n"
msgstr "已強迫使用 ASCII 封裝過的輸出.\n"
#: g10/revoke.c:342 g10/revoke.c:567
#, c-format
msgid "make_keysig_packet failed: %s\n"
msgstr "make_keysig_packet 失敗: %s\n"
#: g10/revoke.c:405
msgid "Revocation certificate created.\n"
msgstr "已建立撤銷憑證.\n"
#: g10/revoke.c:411
#, c-format
msgid "no revocation keys found for \"%s\"\n"
msgstr "沒有找到 \"%s\" 用的撤銷金鑰\n"
#: g10/revoke.c:470
#, c-format
msgid "secret key \"%s\" not found: %s\n"
msgstr "找不到私鑰 \"%s\": %s\n"
#: g10/revoke.c:499
#, c-format
msgid "no corresponding public key: %s\n"
msgstr "沒有相對應的公鑰: %s\n"
#: g10/revoke.c:510
msgid "public key does not match secret key!\n"
msgstr "公鑰與私鑰並不吻合!\n"
#: g10/revoke.c:517
msgid "Create a revocation certificate for this key? (y/N) "
msgstr "要為這把金鑰建立一份撤銷憑證嗎? (y/N) "
#: g10/revoke.c:534
msgid "unknown protection algorithm\n"
msgstr "未知的保護演算法\n"
#: g10/revoke.c:542
msgid "NOTE: This key is not protected!\n"
msgstr "請注意: 這把金鑰未受保護!\n"
#: g10/revoke.c:593
msgid ""
"Revocation certificate created.\n"
"\n"
"Please move it to a medium which you can hide away; if Mallory gets\n"
"access to this certificate he can use it to make your key unusable.\n"
"It is smart to print this certificate and store it away, just in case\n"
"your media become unreadable. But have some caution: The print system of\n"
"your machine might store the data and make it available to others!\n"
msgstr ""
"已建立撤銷憑證.\n"
"\n"
"請把這個檔案搬移到另一個你能夠將之藏起來的媒介上;\n"
"如果有人能夠取得這份憑證的話, 那麼他也能夠讓你的\n"
"金鑰無法繼續使用. 把這份憑證列印出來再藏到別的地\n"
"方也是很好的方法, 以免你的儲存媒介損毀而無法讀取.\n"
"但是千萬小心: 你的機器上的列印系統可能會在列印過\n"
"程中把這些資料暫存在某個其他人也能夠看得到的地方!\n"
#: g10/revoke.c:635
msgid "Please select the reason for the revocation:\n"
msgstr "請選擇撤銷的原因:\n"
#: g10/revoke.c:645
msgid "Cancel"
msgstr "取消"
#: g10/revoke.c:647
#, c-format
msgid "(Probably you want to select %d here)\n"
msgstr "(也許你會想要在這裡選擇 %d)\n"
#: g10/revoke.c:688
msgid "Enter an optional description; end it with an empty line:\n"
msgstr "請輸入選用的描述; 以空白列結束:\n"
#: g10/revoke.c:716
#, c-format
msgid "Reason for revocation: %s\n"
msgstr "撤銷原因: %s\n"
#: g10/revoke.c:718
msgid "(No description given)\n"
msgstr "(沒有給定描述)\n"
#: g10/revoke.c:723
msgid "Is this okay? (y/N) "
msgstr "這樣可以嗎? (y/N) "
#: g10/seckey-cert.c:55
msgid "secret key parts are not available\n"
msgstr "私鑰部分無法取用\n"
#: g10/seckey-cert.c:61
#, c-format
msgid "protection algorithm %d%s is not supported\n"
msgstr "%d%s 保護演算法未支援\n"
#: g10/seckey-cert.c:72
#, c-format
msgid "protection digest %d is not supported\n"
msgstr "%d 保護摘要未支援\n"
#: g10/seckey-cert.c:291
msgid "Invalid passphrase; please try again"
msgstr "無效的密語; 請再試一次"
#: g10/seckey-cert.c:292
#, c-format
msgid "%s ...\n"
msgstr "%s ...\n"
#: g10/seckey-cert.c:361
msgid "WARNING: Weak key detected - please change passphrase again.\n"
msgstr "警告: 偵測到金鑰薄弱 - 請再更換一次密語.\n"
#: g10/seckey-cert.c:404
msgid "generating the deprecated 16-bit checksum for secret key protection\n"
msgstr "正在產生私鑰保護會用到的舊式 16 位元加總檢查\n"
#: g10/seskey.c:61 sm/encrypt.c:119
msgid "weak key created - retrying\n"
msgstr "建立了弱金鑰 - 重試中\n"
#: g10/seskey.c:65
#, c-format
msgid "cannot avoid weak key for symmetric cipher; tried %d times!\n"
msgstr "無法避免對稱式編密法的弱金鑰; 已經試了 %d 次了!\n"
#: g10/seskey.c:227 sm/certcheck.c:89
msgid "DSA requires the hash length to be a multiple of 8 bits\n"
msgstr "DSA 需要 8 位元倍數的雜湊長度\n"
#: g10/seskey.c:240
#, c-format
msgid "DSA key %s uses an unsafe (%u bit) hash\n"
msgstr "DSA 金鑰 %s 使用不安全 (%u 位元) 的雜湊\n"
#: g10/seskey.c:252
#, c-format
msgid "DSA key %s requires a %u bit or larger hash\n"
msgstr "DSA 金鑰 %s 需要 %u 位元以上的雜湊\n"
#: g10/sig-check.c:80
msgid "WARNING: signature digest conflict in message\n"
msgstr "警告: 簽章摘要與訊息不一致\n"
#: g10/sig-check.c:105
#, c-format
msgid "WARNING: signing subkey %s is not cross-certified\n"
msgstr "警告: 簽署子鑰 %s 未經交叉認證\n"
#: g10/sig-check.c:117
#, c-format
msgid "WARNING: signing subkey %s has an invalid cross-certification\n"
msgstr "警告: 簽署子鑰 %s 有無效的交叉憑證\n"
#: g10/sig-check.c:189
#, c-format
msgid "public key %s is %lu second newer than the signature\n"
msgstr "公鑰 %s 比簽章還要新了 %lu 秒\n"
#: g10/sig-check.c:190
#, c-format
msgid "public key %s is %lu seconds newer than the signature\n"
msgstr "公鑰 %s 比簽章還要新了 %lu 秒\n"
#: g10/sig-check.c:201
#, c-format
msgid ""
"key %s was created %lu second in the future (time warp or clock problem)\n"
msgstr "金鑰 %s 已經在 %lu 秒後的未來製妥 (可能是因為時光旅行或時鐘的問題)\n"
#: g10/sig-check.c:203
#, c-format
msgid ""
"key %s was created %lu seconds in the future (time warp or clock problem)\n"
msgstr "金鑰 %s 已經在 %lu 秒後的未來製妥 (可能是因為時光旅行或時鐘的問題)\n"
#: g10/sig-check.c:213
#, c-format
msgid "NOTE: signature key %s expired %s\n"
msgstr "請注意: 簽章金鑰 %s 已於 %s 過期\n"
#: g10/sig-check.c:296
#, c-format
msgid "assuming bad signature from key %s due to an unknown critical bit\n"
msgstr "假設金鑰 %s 的損壞簽章導因於某個未知的關鍵位元\n"
#: g10/sig-check.c:561
#, c-format
msgid "key %s: no subkey for subkey revocation signature\n"
msgstr "金鑰 %s: 沒有子鑰可供子鑰撤銷簽章使用\n"
#: g10/sig-check.c:588
#, c-format
msgid "key %s: no subkey for subkey binding signature\n"
msgstr "金鑰 %s: 沒有子鑰可供附子鑰簽章之用\n"
#: g10/sign.c:89
#, c-format
msgid "WARNING: unable to %%-expand notation (too large). Using unexpanded.\n"
msgstr "警告: 註記 %% 無法擴張 (太大了). 現在使用未擴張的.\n"
#: g10/sign.c:115
#, c-format
msgid ""
"WARNING: unable to %%-expand policy URL (too large). Using unexpanded.\n"
msgstr "警告: 原則 URL 的 %% 無法擴張 (太大了). 現在使用未擴張的.\n"
#: g10/sign.c:138
#, c-format
msgid ""
"WARNING: unable to %%-expand preferred keyserver URL (too large). Using "
"unexpanded.\n"
msgstr "警告: 偏好金鑰伺服器 URL 的 %% 無法擴張 (太大了). 現在使用未擴張的.\n"
#: g10/sign.c:311
#, c-format
msgid "checking created signature failed: %s\n"
msgstr "檢查已建立的簽章時出錯: %s\n"
#: g10/sign.c:320
#, c-format
msgid "%s/%s signature from: \"%s\"\n"
msgstr "%s/%s 簽章來自: \"%s\"\n"
#: g10/sign.c:760
msgid "you can only detach-sign with PGP 2.x style keys while in --pgp2 mode\n"
msgstr "你在 --pgp2 模式下祇能夠使用 PGP 2.x 型態的金鑰來做分離簽署\n"
#: g10/sign.c:836
#, c-format
msgid ""
"WARNING: forcing digest algorithm %s (%d) violates recipient preferences\n"
msgstr "警告: 強迫使用 %s (%d) 摘要演算法會違反收件者偏好設定\n"
#: g10/sign.c:963
msgid "signing:"
msgstr "簽署:"
#: g10/sign.c:1078
msgid "you can only clearsign with PGP 2.x style keys while in --pgp2 mode\n"
msgstr "你在 --pgp2 模式下祇能夠使用 PGP 2.x 型態的金鑰來做明文簽署\n"
#: g10/sign.c:1262
#, c-format
msgid "%s encryption will be used\n"
msgstr "%s 加密將被採用\n"
#: g10/skclist.c:149 g10/skclist.c:213
msgid "key is not flagged as insecure - can't use it with the faked RNG!\n"
msgstr "金鑰未被標示為不安全 - 不能夠拿來跟假的隨機數字產生器併用!\n"
#: g10/skclist.c:180
#, c-format
msgid "skipped \"%s\": duplicated\n"
msgstr "已跳過 \"%s\": 重複了\n"
#: g10/skclist.c:188 g10/skclist.c:198 g10/skclist.c:207
#, c-format
msgid "skipped \"%s\": %s\n"
msgstr "已跳過 \"%s\": %s\n"
#: g10/skclist.c:193
msgid "skipped: secret key already present\n"
msgstr "已跳過: 私鑰已經存在\n"
#: g10/skclist.c:208
msgid "this is a PGP generated Elgamal key which is not secure for signatures!"
msgstr "這是由 PGP 產生的 ElGamal 金鑰, 用於簽章並不安全!"
#: g10/tdbdump.c:58 g10/trustdb.c:360
#, c-format
msgid "trust record %lu, type %d: write failed: %s\n"
msgstr "信任記錄 %lu, 類別 %d: 寫入失敗: %s\n"
#: g10/tdbdump.c:103
#, c-format
msgid ""
"# List of assigned trustvalues, created %s\n"
"# (Use \"gpg --import-ownertrust\" to restore them)\n"
msgstr ""
"# 相對應的信任值清單被建立於 %s\n"
"# (請用 \"gpg --import-ownertrust\" 來取回它們)\n"
#: g10/tdbdump.c:158 g10/tdbdump.c:166 g10/tdbdump.c:171 g10/tdbdump.c:176
#, c-format
msgid "error in `%s': %s\n"
msgstr "在 `%s' 中出錯: %s\n"
#: g10/tdbdump.c:158
msgid "line too long"
msgstr "列太長"
#: g10/tdbdump.c:166
msgid "colon missing"
msgstr "冒號缺漏"
#: g10/tdbdump.c:172
msgid "invalid fingerprint"
msgstr "無效的指紋"
#: g10/tdbdump.c:177
msgid "ownertrust value missing"
msgstr "主觀信任值缺漏"
#: g10/tdbdump.c:213
#, c-format
msgid "error finding trust record in `%s': %s\n"
msgstr "在 `%s' 中尋找信任記錄時出錯: %s\n"
#: g10/tdbdump.c:217
#, c-format
msgid "read error in `%s': %s\n"
msgstr "讀取 `%s' 錯誤: %s\n"
#: g10/tdbdump.c:226 g10/trustdb.c:375
#, c-format
msgid "trustdb: sync failed: %s\n"
msgstr "信任資料庫: 同步化失敗: %s\n"
#: g10/tdbio.c:128 g10/tdbio.c:1448
#, c-format
msgid "trustdb rec %lu: lseek failed: %s\n"
msgstr "信任資料庫記錄 %lu: 本機搜尋失敗: %s\n"
#: g10/tdbio.c:135 g10/tdbio.c:1455
#, c-format
msgid "trustdb rec %lu: write failed (n=%d): %s\n"
msgstr "信任資料庫記錄 %lu: 寫入失敗 (n=%d): %s\n"
#: g10/tdbio.c:245
msgid "trustdb transaction too large\n"
msgstr "信任資料庫更動量過大\n"
#: g10/tdbio.c:498
#, c-format
msgid "can't access `%s': %s\n"
msgstr "無法存取 `%s': %s\n"
#: g10/tdbio.c:524
#, c-format
msgid "%s: directory does not exist!\n"
msgstr "%s: 目錄不存在!\n"
#: g10/tdbio.c:534 g10/tdbio.c:557 g10/tdbio.c:598 sm/keydb.c:221
#, c-format
msgid "can't create lock for `%s'\n"
msgstr "無法為 `%s' 建立鎖定\n"
#: g10/tdbio.c:536 g10/tdbio.c:601
#, c-format
msgid "can't lock `%s'\n"
msgstr "無法鎖定 `%s'\n"
#: g10/tdbio.c:562
#, c-format
msgid "%s: failed to create version record: %s"
msgstr "%s: 建立版本記錄失敗: %s"
#: g10/tdbio.c:566
#, c-format
msgid "%s: invalid trustdb created\n"
msgstr "%s: 建立了無效的信任資料庫\n"
#: g10/tdbio.c:569
#, c-format
msgid "%s: trustdb created\n"
msgstr "%s: 建立了信任資料庫\n"
#: g10/tdbio.c:611
msgid "NOTE: trustdb not writable\n"
msgstr "請注意: 信任資料庫不可寫入\n"
#: g10/tdbio.c:619
#, c-format
msgid "%s: invalid trustdb\n"
msgstr "%s: 無效的信任資料庫\n"
#: g10/tdbio.c:651
#, c-format
msgid "%s: failed to create hashtable: %s\n"
msgstr "%s: 建立雜湊表失敗: %s\n"
#: g10/tdbio.c:659
#, c-format
msgid "%s: error updating version record: %s\n"
msgstr "%s: 更新版本記錄時錯誤: %s\n"
#: g10/tdbio.c:676 g10/tdbio.c:696 g10/tdbio.c:712 g10/tdbio.c:726
#: g10/tdbio.c:756 g10/tdbio.c:1380 g10/tdbio.c:1407
#, c-format
msgid "%s: error reading version record: %s\n"
msgstr "%s: 讀取版本記錄時錯誤: %s\n"
#: g10/tdbio.c:735
#, c-format
msgid "%s: error writing version record: %s\n"
msgstr "%s: 寫入版本記錄時錯誤: %s\n"
#: g10/tdbio.c:1175
#, c-format
msgid "trustdb: lseek failed: %s\n"
msgstr "信任資料庫: 本機搜尋失敗: %s\n"
#: g10/tdbio.c:1184
#, c-format
msgid "trustdb: read failed (n=%d): %s\n"
msgstr "信任資料庫: 讀取失敗 (n=%d): %s\n"
#: g10/tdbio.c:1205
#, c-format
msgid "%s: not a trustdb file\n"
msgstr "%s: 不是一個信任資料庫檔案\n"
#: g10/tdbio.c:1223
#, c-format
msgid "%s: version record with recnum %lu\n"
msgstr "%s: 記錄編號為 %lu 的版本記錄\n"
#: g10/tdbio.c:1228
#, c-format
msgid "%s: invalid file version %d\n"
msgstr "%s: 無效的檔案版本 %d\n"
#: g10/tdbio.c:1413
#, c-format
msgid "%s: error reading free record: %s\n"
msgstr "%s: 讀取可用空間記錄時出錯: %s\n"
#: g10/tdbio.c:1421
#, c-format
msgid "%s: error writing dir record: %s\n"
msgstr "%s: 寫入目錄記錄時出錯: %s\n"
#: g10/tdbio.c:1431
#, c-format
msgid "%s: failed to zero a record: %s\n"
msgstr "%s: 記錄歸零失敗: %s\n"
#: g10/tdbio.c:1461
#, c-format
msgid "%s: failed to append a record: %s\n"
msgstr "%s: 附加記錄失敗: %s\n"
#: g10/tdbio.c:1506
msgid "the trustdb is corrupted; please run \"gpg --fix-trustdb\".\n"
msgstr "信任資料庫已損毀; 請執行 \"gpg --fix-trustdb\".\n"
#: g10/textfilter.c:147
#, c-format
msgid "can't handle text lines longer than %d characters\n"
msgstr "無法處理長於 %d 字符的文字列\n"
#: g10/textfilter.c:247
#, c-format
msgid "input line longer than %d characters\n"
msgstr "輸入列比 %d 字符還長\n"
#: g10/trustdb.c:221
#, c-format
msgid "`%s' is not a valid long keyID\n"
msgstr "`%s' 不是一個有效的長式金鑰 ID\n"
#: g10/trustdb.c:252
#, c-format
msgid "key %s: accepted as trusted key\n"
msgstr "金鑰 %s: 如受信任的金鑰般被接受了\n"
#: g10/trustdb.c:290
#, c-format
msgid "key %s occurs more than once in the trustdb\n"
msgstr "金鑰 %s 在信任資料庫中出現了不止一次\n"
#: g10/trustdb.c:305
#, c-format
msgid "key %s: no public key for trusted key - skipped\n"
msgstr "金鑰 %s: 受信任的金鑰沒有公鑰 - 已跳過\n"
#: g10/trustdb.c:315
#, c-format
msgid "key %s marked as ultimately trusted\n"
msgstr "金鑰 %s 已標記成徹底信任了\n"
#: g10/trustdb.c:339
#, c-format
msgid "trust record %lu, req type %d: read failed: %s\n"
msgstr "信任記錄 %lu, 請求類別 %d: 讀取失敗: %s\n"
#: g10/trustdb.c:345
#, c-format
msgid "trust record %lu is not of requested type %d\n"
msgstr "信任記錄 %lu 不是所請求的類別 %d\n"
#: g10/trustdb.c:441
#, c-format
msgid "unable to use unknown trust model (%d) - assuming %s trust model\n"
msgstr "無法使用未知的信任模型 (%d) - 現在採用 %s 信任模型\n"
#: g10/trustdb.c:447
#, c-format
msgid "using %s trust model\n"
msgstr "正在使用 %s 信任模型\n"
#: g10/trustdb.c:499
msgid "10 translator see trustdb.c:uid_trust_string_fixed"
msgstr "10 譯者請參見 trustdb.c:uid_trust_string_fixed"
#: g10/trustdb.c:501
msgid "[ revoked]"
msgstr "[ 已撤銷 ]"
#: g10/trustdb.c:503 g10/trustdb.c:508
msgid "[ expired]"
msgstr "[ 已過期 ]"
#: g10/trustdb.c:507
msgid "[ unknown]"
msgstr "[ 未知 ]"
#: g10/trustdb.c:509
msgid "[ undef ]"
msgstr "[ 未定義 ]"
#: g10/trustdb.c:510
msgid "[marginal]"
msgstr "[ 勉強 ]"
#: g10/trustdb.c:511
msgid "[ full ]"
msgstr "[ 完全 ]"
#: g10/trustdb.c:512
msgid "[ultimate]"
msgstr "[ 徹底 ]"
#: g10/trustdb.c:527
msgid "undefined"
msgstr "未定義"
#: g10/trustdb.c:528
msgid "never"
msgstr "永遠不會"
#: g10/trustdb.c:529
msgid "marginal"
msgstr "勉強"
#: g10/trustdb.c:530
msgid "full"
msgstr "完全"
#: g10/trustdb.c:531
msgid "ultimate"
msgstr "徹底"
#: g10/trustdb.c:571
msgid "no need for a trustdb check\n"
msgstr "不需要檢查信任資料庫\n"
#: g10/trustdb.c:577 g10/trustdb.c:2423
#, c-format
msgid "next trustdb check due at %s\n"
msgstr "下次信任資料庫檢查將於 %s 進行\n"
#: g10/trustdb.c:586
#, c-format
msgid "no need for a trustdb check with `%s' trust model\n"
msgstr "在 `%s' 信任模型中並不需要檢查信任資料庫\n"
#: g10/trustdb.c:601
#, c-format
msgid "no need for a trustdb update with `%s' trust model\n"
msgstr "在 `%s' 信任模型中並不需要更新信任資料庫\n"
#: g10/trustdb.c:833 g10/trustdb.c:1271
#, c-format
msgid "public key %s not found: %s\n"
msgstr "找不到公鑰 %s: %s\n"
#: g10/trustdb.c:1028
msgid "please do a --check-trustdb\n"
msgstr "請做一次 --check-trustdb\n"
#: g10/trustdb.c:1032
msgid "checking the trustdb\n"
msgstr "正在檢查信任資料庫\n"
#: g10/trustdb.c:2166
#, c-format
msgid "%d keys processed (%d validity counts cleared)\n"
msgstr "已經處理了 %d 把金鑰 (共計已解決了 %d 份有效性)\n"
#: g10/trustdb.c:2231
msgid "no ultimately trusted keys found\n"
msgstr "沒有找到任何徹底信任的金鑰\n"
#: g10/trustdb.c:2245
#, c-format
msgid "public key of ultimately trusted key %s not found\n"
msgstr "找不到徹底信任金鑰 %s 的公鑰\n"
#: g10/trustdb.c:2268
#, c-format
msgid "%d marginal(s) needed, %d complete(s) needed, %s trust model\n"
msgstr "%d 個勉強信任以及 %d 個完全信任是 %s 信任模型的最小需求\n"
#: g10/trustdb.c:2354
#, c-format
msgid ""
"depth: %d valid: %3d signed: %3d trust: %d-, %dq, %dn, %dm, %df, %du\n"
msgstr "深度: %d 有效: %3d 已簽署: %3d 信任: %d-, %dq, %dn, %dm, %df, %du\n"
#: g10/trustdb.c:2429
#, c-format
msgid "unable to update trustdb version record: write failed: %s\n"
msgstr "無法更新信任資料庫版本記錄: 寫入失敗: %s\n"
#: g10/verify.c:118
msgid ""
"the signature could not be verified.\n"
"Please remember that the signature file (.sig or .asc)\n"
"should be the first file given on the command line.\n"
msgstr ""
"簽章無法驗證.\n"
"請記住簽章檔 (.sig 或 .asc)\n"
"應該是第一個命令列給定的檔案.\n"
#: g10/verify.c:205
#, c-format
msgid "input line %u too long or missing LF\n"
msgstr "輸入列 %u 太長或者列末的 LF 遺失了\n"
#: g10/verify.c:250
#, c-format
msgid "can't open fd %d: %s\n"
msgstr "無法開啟 fd %d: %s\n"
#: jnlib/argparse.c:176
msgid "argument not expected"
msgstr "沒料到有引數"
#: jnlib/argparse.c:178
msgid "read error"
msgstr "讀取錯誤"
#: jnlib/argparse.c:180
msgid "keyword too long"
msgstr "關鍵字太長"
#: jnlib/argparse.c:182
msgid "missing argument"
msgstr "無效的引數"
#: jnlib/argparse.c:184
msgid "invalid command"
msgstr "無效的指令"
#: jnlib/argparse.c:186
msgid "invalid alias definition"
msgstr "無效的別名定義"
#: jnlib/argparse.c:188
msgid "invalid option"
msgstr "無效的選項"
#: jnlib/argparse.c:196
#, c-format
msgid "missing argument for option \"%.50s\"\n"
msgstr "\"%.50s\" 選項遺失了引數\n"
#: jnlib/argparse.c:198
#, c-format
msgid "option \"%.50s\" does not expect an argument\n"
msgstr "\"%.50s\" 選項沒料到會有引數\n"
#: jnlib/argparse.c:201
#, c-format
msgid "invalid command \"%.50s\"\n"
msgstr "無效的指令 \"%.50s\"\n"
#: jnlib/argparse.c:203
#, c-format
msgid "option \"%.50s\" is ambiguous\n"
msgstr "\"%.50s\" 選項不明確\n"
#: jnlib/argparse.c:205
#, c-format
msgid "command \"%.50s\" is ambiguous\n"
msgstr "\"%.50s\" 指令不明確\n"
#: jnlib/argparse.c:207
#, c-format
msgid "invalid option \"%.50s\"\n"
msgstr "無效的選項 \"%.50s\"\n"
#: jnlib/logging.c:624
#, c-format
msgid "you found a bug ... (%s:%d)\n"
msgstr "你找到一個瑕疵了 ... (%s:%d)\n"
#: jnlib/utf8conv.c:86
#, c-format
msgid "error loading `%s': %s\n"
msgstr "載入 `%s' 時出錯: %s\n"
#: jnlib/utf8conv.c:124
#, c-format
msgid "conversion from `%s' to `%s' not available\n"
msgstr "沒有從 `%s' 到 `%s' 之間的轉換可用\n"
#: jnlib/utf8conv.c:132
#, c-format
msgid "iconv_open failed: %s\n"
msgstr "iconv_open 失敗: %s\n"
#: jnlib/utf8conv.c:392 jnlib/utf8conv.c:658
#, c-format
msgid "conversion from `%s' to `%s' failed: %s\n"
msgstr "從 `%s' 轉換成 `%s' 失敗: %s\n"
#: kbx/kbxutil.c:92
msgid "set debugging flags"
msgstr "設定除錯旗標"
#: kbx/kbxutil.c:93
msgid "enable full debugging"
msgstr "啟用完整除錯"
#: kbx/kbxutil.c:114
msgid "Please report bugs to "
msgstr "翻譯瑕疵請回報給 Jedi@Jedi.org ; 程式瑕疵則請回報給"
#: kbx/kbxutil.c:118
msgid "Usage: kbxutil [options] [files] (-h for help)"
msgstr "用法: kbxutil [選項] [檔案] (或用 -h 求助)"
#: kbx/kbxutil.c:121
msgid ""
"Syntax: kbxutil [options] [files]\n"
"list, export, import Keybox data\n"
msgstr ""
"語法: kbxutil [選項] [檔案]\n"
"列出, 匯出, 匯入金鑰鑰匙盒資料\n"
#: scd/app-nks.c:326 scd/app-openpgp.c:1328 scd/app-dinsig.c:297
msgid "||Please enter your PIN at the reader's keypad"
msgstr "||請在讀卡機鍵盤上輸入你的 PIN"
#: scd/app-nks.c:330 scd/app-openpgp.c:1332 scd/app-openpgp.c:1364
#: scd/app-openpgp.c:1483 scd/app-dinsig.c:301
#, c-format
msgid "PIN callback returned error: %s\n"
msgstr "收回 PIN 時傳回錯誤: %s\n"
#: scd/app-nks.c:378
msgid "the NullPIN has not yet been changed\n"
msgstr "NullPIN 還沒有變更過\n"
#: scd/app-openpgp.c:599
#, c-format
msgid "failed to store the fingerprint: %s\n"
msgstr "存放指紋失敗: %s\n"
#: scd/app-openpgp.c:612
#, c-format
msgid "failed to store the creation date: %s\n"
msgstr "存放創生日期失敗: %s\n"
#: scd/app-openpgp.c:1007
#, c-format
msgid "reading public key failed: %s\n"
msgstr "讀取公鑰時失敗: %s\n"
#: scd/app-openpgp.c:1015 scd/app-openpgp.c:2047
msgid "response does not contain the public key data\n"
msgstr "回應中未包含公鑰資料\n"
#: scd/app-openpgp.c:1023 scd/app-openpgp.c:2055
msgid "response does not contain the RSA modulus\n"
msgstr "回應中未包含 RSA 系數\n"
#: scd/app-openpgp.c:1032 scd/app-openpgp.c:2065
msgid "response does not contain the RSA public exponent\n"
msgstr "回應中未包含 RSA 公用指數\n"
#: scd/app-openpgp.c:1314
#, c-format
msgid "||Please enter your PIN at the reader's keypad%%0A[sigs done: %lu]"
msgstr "||請在讀卡機鍵盤上輸入你的 PIN%%0A[簽署完成: %lu]"
#: scd/app-openpgp.c:1348
#, c-format
msgid "||Please enter the PIN%%0A[sigs done: %lu]"
msgstr "||請輸入 PIN%%0A[簽署完成: %lu]"
#: scd/app-openpgp.c:1371 scd/app-openpgp.c:1489
#, c-format
msgid "PIN for CHV%d is too short; minimum length is %d\n"
msgstr "用於 CHV%d 的 PIN 太短; 長度最少要有 %d\n"
#: scd/app-openpgp.c:1384 scd/app-openpgp.c:1424 scd/app-openpgp.c:1499
#: scd/app-openpgp.c:2318
#, c-format
msgid "verify CHV%d failed: %s\n"
msgstr "驗證 CHV%d 失敗: %s\n"
#: scd/app-openpgp.c:1447
msgid "access to admin commands is not configured\n"
msgstr "管理者指令存取權限尚未組態\n"
#: scd/app-openpgp.c:1462 scd/app-openpgp.c:2569
msgid "error retrieving CHV status from card\n"
msgstr "從卡片取回 CHV 狀態時出錯\n"
#: scd/app-openpgp.c:1468 scd/app-openpgp.c:2578
msgid "card is permanently locked!\n"
msgstr "卡片永久鎖定了!!\n"
#: scd/app-openpgp.c:1473
#, c-format
msgid "%d Admin PIN attempts remaining before card is permanently locked\n"
msgstr "%d 管理者 PIN 試圖在卡片永久鎖定前遺留下來\n"
#. TRANSLATORS: Do not translate the "|A|" prefix but
#. keep it at the start of the string. We need this elsewhere
#. to get some infos on the string.
#: scd/app-openpgp.c:1480
msgid "|A|Admin PIN"
msgstr "|A|管理者 PIN"
#. TRANSLATORS: Do not translate the "|*|" prefixes but
#. keep it at the start of the string. We need this elsewhere
#. to get some infos on the string.
#: scd/app-openpgp.c:1629
msgid "|AN|New Admin PIN"
msgstr "|AN|新增管理者 PIN"
#: scd/app-openpgp.c:1629
msgid "|N|New PIN"
msgstr "|N|新增 PIN"
#: scd/app-openpgp.c:1633
#, c-format
msgid "error getting new PIN: %s\n"
msgstr "取得新的 PIN 時出錯: %s\n"
#: scd/app-openpgp.c:1683 scd/app-openpgp.c:2133
msgid "error reading application data\n"
msgstr "讀取應用程式資料時出錯\n"
#: scd/app-openpgp.c:1689 scd/app-openpgp.c:2140
msgid "error reading fingerprint DO\n"
msgstr "讀取指紋 DO 時出錯\n"
#: scd/app-openpgp.c:1699
msgid "key already exists\n"
msgstr "金鑰已存在\n"
#: scd/app-openpgp.c:1703
msgid "existing key will be replaced\n"
msgstr "既有的金鑰將被取代\n"
#: scd/app-openpgp.c:1705
msgid "generating new key\n"
msgstr "正在產生新的金鑰\n"
#: scd/app-openpgp.c:1872
msgid "creation timestamp missing\n"
msgstr "缺漏創生時間戳印\n"
#: scd/app-openpgp.c:1879
#, c-format
msgid "RSA modulus missing or not of size %d bits\n"
msgstr "RSA 模組缺漏或者並非 %d 位元大\n"
#: scd/app-openpgp.c:1886
#, c-format
msgid "RSA public exponent missing or larger than %d bits\n"
msgstr "RSA 公用指數缺漏或者大於 %d 位元\n"
#: scd/app-openpgp.c:1894 scd/app-openpgp.c:1901
#, c-format
msgid "RSA prime %s missing or not of size %d bits\n"
msgstr "RSA 質數 %s 缺漏或者並非 %d 位元大\n"
#: scd/app-openpgp.c:1964
#, c-format
msgid "failed to store the key: %s\n"
msgstr "存放金鑰失敗: %s\n"
#: scd/app-openpgp.c:2024
msgid "please wait while key is being generated ...\n"
msgstr "正在產生金鑰中, 請稍候 ...\n"
#: scd/app-openpgp.c:2038
msgid "generating key failed\n"
msgstr "產生金鑰時失敗\n"
#: scd/app-openpgp.c:2041
#, c-format
msgid "key generation completed (%d seconds)\n"
msgstr "金鑰產生完畢 (%d 秒)\n"
#: scd/app-openpgp.c:2098
msgid "invalid structure of OpenPGP card (DO 0x93)\n"
msgstr "無效的 OpenPGP 卡片結構 (DO 0x93)\n"
#: scd/app-openpgp.c:2148
msgid "fingerprint on card does not match requested one\n"
msgstr "卡片上的指紋與所要求的那個並不吻合\n"
#: scd/app-openpgp.c:2236
#, c-format
msgid "card does not support digest algorithm %s\n"
msgstr "卡片不支援 %s 摘要演算法\n"
#: scd/app-openpgp.c:2297
#, c-format
msgid "signatures created so far: %lu\n"
msgstr "目前建立的簽章: %lu\n"
#: scd/app-openpgp.c:2583
msgid ""
"verification of Admin PIN is currently prohibited through this command\n"
msgstr "目前在此指令中的管理者 PIN 驗證被禁止了\n"
#: scd/app-openpgp.c:2656 scd/app-openpgp.c:2666
#, c-format
msgid "can't access %s - invalid OpenPGP card?\n"
msgstr "無法存取 %s - 無效的 OpenPGP 卡片?\n"
#: scd/scdaemon.c:105
msgid "run in multi server mode (foreground)"
msgstr "以多重伺服器模式執行 (前景)"
#: scd/scdaemon.c:111 sm/gpgsm.c:365
msgid "read options from file"
msgstr "從檔案中讀取選項"
#: scd/scdaemon.c:121
msgid "|N|connect to reader at port N"
msgstr "|N|從 N 埠連線至讀卡機"
#: scd/scdaemon.c:122
msgid "|NAME|use NAME as ct-API driver"
msgstr "|名稱|使用「名稱」做為 ct-API 驅動程式"
#: scd/scdaemon.c:123
msgid "|NAME|use NAME as PC/SC driver"
msgstr "|名稱|使用「名稱」做為 PC/SC 驅動程式"
#: scd/scdaemon.c:126
msgid "do not use the internal CCID driver"
msgstr "不要使用內部的 CCID 驅動程式"
#: scd/scdaemon.c:131
msgid "do not use a reader's keypad"
msgstr "不要使用讀卡機鍵盤"
#: scd/scdaemon.c:132
msgid "allow the use of admin card commands"
msgstr "允許使用管理者卡片指令"
#: scd/scdaemon.c:210
msgid "Usage: scdaemon [options] (-h for help)"
msgstr "用法: scdaemon [選項] (或用 -h 求助)"
#: scd/scdaemon.c:212
msgid ""
"Syntax: scdaemon [options] [command [args]]\n"
"Smartcard daemon for GnuPG\n"
msgstr ""
"語法: scdaemon [選項] [指令 [引數]]\n"
"GnuPg 智慧卡服務\n"
#: scd/scdaemon.c:670
msgid "please use the option `--daemon' to run the program in the background\n"
msgstr "請使用 `--daemon' 選項來將此程式執行於背景\n"
#: scd/scdaemon.c:1024
#, c-format
msgid "handler for fd %d started\n"
msgstr "用於 fd %d 的經手程式已啟動\n"
#: scd/scdaemon.c:1030
#, c-format
msgid "handler for fd %d terminated\n"
msgstr "用於 fd %d 的經手程式已終止\n"
#: sm/base64.c:325
#, c-format
msgid "invalid radix64 character %02x skipped\n"
msgstr "已跳過無效的 radix64 字符 %02x\n"
#: sm/call-agent.c:138
#, c-format
msgid "failed to proxy %s inquiry to client\n"
msgstr ""
#: sm/call-dirmngr.c:209
#, c-format
msgid "no running dirmngr - starting `%s'\n"
msgstr "沒有執行中的 dirmngr - 正在啟動 `%s'\n"
#: sm/call-dirmngr.c:242
msgid "malformed DIRMNGR_INFO environment variable\n"
msgstr "被變造的 DIRMNGR_INFO 環境變數\n"
#: sm/call-dirmngr.c:254
#, c-format
msgid "dirmngr protocol version %d is not supported\n"
msgstr "未支援 dirmngr 協定版本 %d\n"
#: sm/call-dirmngr.c:274
msgid "can't connect to the dirmngr - trying fall back\n"
msgstr "無法連線至 dirmngr - 正試著退回\n"
#: sm/certchain.c:194
#, c-format
msgid "validation model requested by certificate: %s"
msgstr "憑證所要求的驗證模型: %s"
#: sm/certchain.c:195 sm/certchain.c:1732
msgid "chain"
msgstr "chain"
#: sm/certchain.c:196 sm/certchain.c:1732
msgid "shell"
msgstr "shell"
#: sm/certchain.c:241
#, c-format
msgid "critical certificate extension %s is not supported"
msgstr "未支援關鍵憑證延伸 %s"
#: sm/certchain.c:280
msgid "issuer certificate is not marked as a CA"
msgstr "發行者憑證並未標記為 CA"
#: sm/certchain.c:318
msgid "critical marked policy without configured policies"
msgstr "關鍵已標記原則沒有已組態的原則"
#: sm/certchain.c:328
#, c-format
msgid "failed to open `%s': %s\n"
msgstr "開啟 `%s' 失敗: %s\n"
#: sm/certchain.c:335 sm/certchain.c:364
msgid "note: non-critical certificate policy not allowed"
msgstr "請注意: 不允許非關鍵的憑證原則"
#: sm/certchain.c:339 sm/certchain.c:368
msgid "certificate policy not allowed"
msgstr "未允許憑證原則"
#: sm/certchain.c:480
msgid "looking up issuer at external location\n"
msgstr "從外部位置尋找發行者\n"
#: sm/certchain.c:499
#, c-format
msgid "number of issuers matching: %d\n"
msgstr "吻合的發行者數量: %d\n"
#: sm/certchain.c:541
#, fuzzy
msgid "looking up issuer from the Dirmngr cache\n"
msgstr "從外部位置尋找發行者\n"
#: sm/certchain.c:565
#, fuzzy, c-format
msgid "number of matching certificates: %d\n"
msgstr "匯入憑證時出錯: %s\n"
#: sm/certchain.c:567
#, fuzzy, c-format
msgid "dirmngr cache-only key lookup failed: %s\n"
msgstr "遮蔽金鑰時失敗: %s\n"
#: sm/certchain.c:735 sm/certchain.c:1153 sm/certchain.c:1760 sm/decrypt.c:259
#: sm/encrypt.c:349 sm/sign.c:327 sm/verify.c:113
msgid "failed to allocated keyDB handle\n"
msgstr "配置 keyDB handle 失敗\n"
#: sm/certchain.c:826
msgid "certificate has been revoked"
msgstr "憑證已撤銷"
#: sm/certchain.c:836
msgid "no CRL found for certificate"
msgstr "找不到用於憑證的 CRL"
#: sm/certchain.c:841
msgid "the status of the certificate is unknown"
msgstr "憑證的狀態未知"
#: sm/certchain.c:846
msgid "the available CRL is too old"
msgstr "可用的 CRL 太舊了"
#: sm/certchain.c:848
msgid "please make sure that the \"dirmngr\" is properly installed\n"
msgstr "請確認 \"dirmngr\" 已安裝妥善\n"
#: sm/certchain.c:854
#, c-format
msgid "checking the CRL failed: %s"
msgstr "檢查 CRL 時失敗: %s"
#: sm/certchain.c:883 sm/certchain.c:951
#, c-format
msgid "certificate with invalid validity: %s"
msgstr "有效性無效的憑證: %s"
#: sm/certchain.c:898 sm/certchain.c:983
msgid "certificate not yet valid"
msgstr "憑證尚未生效"
#: sm/certchain.c:899 sm/certchain.c:984
msgid "root certificate not yet valid"
msgstr "根憑證尚未生效"
#: sm/certchain.c:900 sm/certchain.c:985
msgid "intermediate certificate not yet valid"
msgstr "媒介憑證尚未生效"
#: sm/certchain.c:913
msgid "certificate has expired"
msgstr "憑證已過期"
#: sm/certchain.c:914
msgid "root certificate has expired"
msgstr "根憑證已過期"
#: sm/certchain.c:915
msgid "intermediate certificate has expired"
msgstr "媒介憑證已過期"
#: sm/certchain.c:957
#, c-format
msgid "required certificate attributes missing: %s%s%s"
msgstr "遺失所需的憑證屬性: %s%s%s"
#: sm/certchain.c:966
msgid "certificate with invalid validity"
msgstr "有效性無效的憑證"
#: sm/certchain.c:1003
msgid "signature not created during lifetime of certificate"
msgstr "簽章並非在憑證生存時間內所造"
#: sm/certchain.c:1005
msgid "certificate not created during lifetime of issuer"
msgstr "憑證並非在發行者生存時間內所造"
#: sm/certchain.c:1006
msgid "intermediate certificate not created during lifetime of issuer"
msgstr "媒介憑證並非在發行者生存時間內所造"
#: sm/certchain.c:1010
msgid " ( signature created at "
msgstr " ( 簽章建立於 "
#: sm/certchain.c:1011
msgid " (certificate created at "
msgstr " ( 憑證建立於 "
#: sm/certchain.c:1014
msgid " (certificate valid from "
msgstr " (憑證有效自 "
#: sm/certchain.c:1015
msgid " ( issuer valid from "
msgstr " ( 發行者有效自 "
#: sm/certchain.c:1045
#, c-format
msgid "fingerprint=%s\n"
msgstr "指紋=%s\n"
#: sm/certchain.c:1054
msgid "root certificate has now been marked as trusted\n"
msgstr "根憑證現在已標記為已信任\n"
#: sm/certchain.c:1067
msgid "interactive marking as trusted not enabled in gpg-agent\n"
msgstr "在 gpg-agent 中未啟用互動式標記為已信任\n"
#: sm/certchain.c:1073
msgid "interactive marking as trusted disabled for this session\n"
msgstr "互動式標記為已信任在此作業階段中已停用\n"
#: sm/certchain.c:1130
msgid "WARNING: creation time of signature not known - assuming current time"
msgstr "警告: 簽章創造時間未知 - 假設為此刻"
#: sm/certchain.c:1194
msgid "no issuer found in certificate"
msgstr "憑證中找不到發行者"
#: sm/certchain.c:1270
msgid "self-signed certificate has a BAD signature"
msgstr "自簽憑證有 不良 簽章"
#: sm/certchain.c:1339
msgid "root certificate is not marked trusted"
msgstr "根憑證未標記為已信任"
#: sm/certchain.c:1352
#, c-format
msgid "checking the trust list failed: %s\n"
msgstr "檢查信任清單時失敗: %s\n"
#: sm/certchain.c:1381 sm/import.c:158
msgid "certificate chain too long\n"
msgstr "憑證鏈太長\n"
#: sm/certchain.c:1393
msgid "issuer certificate not found"
msgstr "找不到發行者憑證"
#: sm/certchain.c:1426
msgid "certificate has a BAD signature"
msgstr "憑證有 不良 簽章"
#: sm/certchain.c:1457
msgid "found another possible matching CA certificate - trying again"
msgstr "找到了另一個可能吻合的 CA 憑證 - 正再試一次"
#: sm/certchain.c:1508
#, c-format
msgid "certificate chain longer than allowed by CA (%d)"
msgstr "憑證鏈比 CA 所允許的 (%d) 還長"
#: sm/certchain.c:1548 sm/certchain.c:1831
msgid "certificate is good\n"
msgstr "憑證完好\n"
#: sm/certchain.c:1549
msgid "intermediate certificate is good\n"
msgstr "媒介憑證良好\n"
#: sm/certchain.c:1550
msgid "root certificate is good\n"
msgstr "根憑證完好\n"
#: sm/certchain.c:1721
msgid "switching to chain model"
msgstr "切換至鏈模型"
#: sm/certchain.c:1730
#, c-format
msgid "validation model used: %s"
msgstr "已使用的驗證模型: %s"
#: sm/certcheck.c:101
#, c-format
msgid "%s key uses an unsafe (%u bit) hash\n"
msgstr "金鑰 %s 使用不安全 (%u 位元) 的雜湊\n"
#: sm/certcheck.c:111
#, c-format
msgid "a %u bit hash is not valid for a %u bit %s key\n"
msgstr "%u 位元的雜湊對 %u 位元的 %s 金鑰來說是無效的\n"
#: sm/certcheck.c:248 sm/sign.c:480 sm/verify.c:201
msgid "(this is the MD2 algorithm)\n"
msgstr "(這是 MD2 演算法)\n"
#: sm/certdump.c:66 sm/certdump.c:149
msgid "none"
msgstr "無"
#: sm/certdump.c:160
msgid "[none]"
msgstr "[ 無 ]"
#: sm/certdump.c:583 sm/certdump.c:628 sm/certdump.c:693 sm/certdump.c:746
msgid "[Error - invalid encoding]"
msgstr "[錯誤 - 無效的編碼]"
#: sm/certdump.c:591 sm/certdump.c:636
msgid "[Error - out of core]"
msgstr "[錯誤 - 超出核心]"
#: sm/certdump.c:673 sm/certdump.c:729
msgid "[Error - No name]"
msgstr "[錯誤 - 沒有名稱]"
#: sm/certdump.c:698 sm/certdump.c:752
msgid "[Error - invalid DN]"
msgstr "[錯誤 - 無效的 DN]"
#: sm/certdump.c:946
#, c-format
msgid ""
"Please enter the passphrase to unlock the secret key for:\n"
"\"%s\"\n"
"S/N %s, ID 0x%08lX, created %s"
msgstr ""
"請輸入密語來解開下列使用者的私鑰:\n"
"\"%s\"\n"
"S/N %s, ID 0x%08lX, 建立於 %s"
#: sm/certlist.c:121
msgid "no key usage specified - assuming all usages\n"
msgstr "沒有指定的金鑰用途 - 假設為所有的用途\n"
#: sm/certlist.c:131 sm/keylist.c:258
#, c-format
msgid "error getting key usage information: %s\n"
msgstr "取得金鑰用途資訊時出錯: %s\n"
#: sm/certlist.c:141
msgid "certificate should have not been used for certification\n"
msgstr "憑證應該還未被用於憑證\n"
#: sm/certlist.c:153
msgid "certificate should have not been used for OCSP response signing\n"
msgstr "憑證應該還未被用於 OCSP 回應簽署\n"
#: sm/certlist.c:164
msgid "certificate should have not been used for encryption\n"
msgstr "憑證應該還未被用於加密\n"
#: sm/certlist.c:165
msgid "certificate should have not been used for signing\n"
msgstr "憑證應該還未被用於簽署\n"
#: sm/certlist.c:166
msgid "certificate is not usable for encryption\n"
msgstr "憑證無法用於加密\n"
#: sm/certlist.c:167
msgid "certificate is not usable for signing\n"
msgstr "憑證無法用於簽署\n"
#: sm/certreqgen.c:474
#, c-format
msgid "line %d: invalid algorithm\n"
msgstr "第 %d 列: 無效的演算法\n"
#: sm/certreqgen.c:487
#, c-format
msgid "line %d: invalid key length %u (valid are %d to %d)\n"
msgstr "第 %d 列: 金鑰長度 %u 無效 (有效範圍是從 %d 至 %d)\n"
#: sm/certreqgen.c:505
#, c-format
msgid "line %d: no subject name given\n"
msgstr "第 %d 列: 沒有給定的物件名稱\n"
#: sm/certreqgen.c:514
#, c-format
msgid "line %d: invalid subject name label `%.*s'\n"
msgstr "第 %d 列: 無效的物件名稱標籤 `%.*s'\n"
#: sm/certreqgen.c:517
#, c-format
msgid "line %d: invalid subject name `%s' at pos %d\n"
msgstr "第 %d 列: 無效的物件名稱 `%s' 於 pos %d\n"
#: sm/certreqgen.c:534
#, c-format
msgid "line %d: not a valid email address\n"
msgstr "第 %d 列: 不是有效的電子郵件地址\n"
#: sm/certreqgen.c:546
#, c-format
msgid "line %d: error reading key `%s' from card: %s\n"
msgstr "第 %d 列: 從卡片讀取金鑰 `%s' 時出錯: %s\n"
#: sm/certreqgen.c:558
#, c-format
msgid "line %d: error getting key by keygrip `%s': %s\n"
msgstr "第 %d 列: 以金鑰鑰柄 `%s' 取得金鑰時出錯: %s\n"
#: sm/certreqgen.c:574
#, c-format
msgid "line %d: key generation failed: %s <%s>\n"
msgstr "第 %d 列: 金鑰產生失敗: %s <%s>\n"
#: sm/certreqgen-ui.c:122
#, c-format
msgid " (%d) RSA\n"
msgstr " (%d) RSA\n"
#: sm/certreqgen-ui.c:123
#, c-format
msgid " (%d) Existing key\n"
msgstr " (%d) 現有的金鑰\n"
#: sm/certreqgen-ui.c:124
#, c-format
msgid " (%d) Existing key from card\n"
msgstr " (%d) 卡片上現存的金鑰\n"
#: sm/certreqgen-ui.c:176
#, c-format
msgid "Possible actions for a %s key:\n"
msgstr "%s 金鑰可能的動作:\n"
#: sm/certreqgen-ui.c:177
#, c-format
msgid " (%d) sign, encrypt\n"
msgstr " (%d) 簽署, 加密\n"
#: sm/certreqgen-ui.c:178
#, c-format
msgid " (%d) sign\n"
msgstr " (%d) 簽署\n"
#: sm/certreqgen-ui.c:179
#, c-format
msgid " (%d) encrypt\n"
msgstr " (%d) 加密\n"
#: sm/certreqgen-ui.c:203
msgid "Enter the X.509 subject name: "
msgstr "請輸入 X.509 主旨名稱: "
#: sm/certreqgen-ui.c:207
msgid "No subject name given\n"
msgstr "沒有給定的物件名稱\n"
#: sm/certreqgen-ui.c:211
#, c-format
msgid "Invalid subject name label `%.*s'\n"
msgstr "無效的物件名稱標籤 `%.*s'\n"
#. TRANSLATORS: The 22 in the second string is the
#. length of the first string up to the "%s". Please
#. adjust it do the length of your translation. The
#. second string is merely passed to atoi so you can
#. drop everything after the number.
#: sm/certreqgen-ui.c:220
#, c-format
msgid "Invalid subject name `%s'\n"
msgstr "無效的物件名稱 `%s'\n"
#: sm/certreqgen-ui.c:222
msgid "22 translator: see certreg-ui.c:gpgsm_gencertreq_tty"
msgstr "22"
#: sm/certreqgen-ui.c:234
msgid "Enter email addresses"
msgstr "請輸入電子郵件地址"
#: sm/certreqgen-ui.c:235
msgid " (end with an empty line):\n"
msgstr " (以空白列結束):\n"
#: sm/certreqgen-ui.c:239
msgid "Enter DNS names"
msgstr "請輸入 DNS 名稱"
#: sm/certreqgen-ui.c:240 sm/certreqgen-ui.c:245
msgid " (optional; end with an empty line):\n"
msgstr " (非必要; 以空白列結束):\n"
#: sm/certreqgen-ui.c:244
msgid "Enter URIs"
msgstr "請輸入 URI"
#: sm/certreqgen-ui.c:271
msgid "Parameters to be used for the certificate request:\n"
msgstr "用於憑證請求的參數:\n"
#: sm/certreqgen-ui.c:289
msgid "Now creating certificate request. This may take a while ...\n"
msgstr "現在正在建立憑證請求. 這可能會花上一段時間 ...\n"
#: sm/certreqgen-ui.c:298
msgid "Ready. You should now send this request to your CA.\n"
msgstr "準備好了. 你現在就該把此請求送到你的 CA.\n"
#: sm/certreqgen-ui.c:303
msgid "resource problem: out or core\n"
msgstr "資源問題: 超出核心\n"
#: sm/decrypt.c:324
msgid "(this is the RC2 algorithm)\n"
msgstr "(這是 RC2 演算法)\n"
#: sm/decrypt.c:326
msgid "(this does not seem to be an encrypted message)\n"
msgstr "(這看起來不像是個加密過的訊息)\n"
#: sm/delete.c:50 sm/delete.c:101
#, c-format
msgid "certificate `%s' not found: %s\n"
msgstr "找不到憑證 `%s': %s\n"
#: sm/delete.c:111 sm/keydb.c:1395 sm/keydb.c:1495
#, c-format
msgid "error locking keybox: %s\n"
msgstr "鎖住金鑰鑰匙盒時出錯: %s\n"
#: sm/delete.c:132
#, c-format
msgid "duplicated certificate `%s' deleted\n"
msgstr "重複的 `%s' 憑證已刪除\n"
#: sm/delete.c:134
#, c-format
msgid "certificate `%s' deleted\n"
msgstr "憑證 `%s' 已刪除\n"
#: sm/delete.c:164
#, c-format
msgid "deleting certificate \"%s\" failed: %s\n"
msgstr "刪除憑證 \"%s\" 時失敗: %s\n"
#: sm/encrypt.c:335
msgid "no valid recipients given\n"
msgstr "沒有給定有效的收件者\n"
#: sm/gpgsm.c:247
msgid "|[FILE]|make a signature"
msgstr "|[檔案]|做出簽章"
#: sm/gpgsm.c:248
msgid "|[FILE]|make a clear text signature"
msgstr "|[檔案]|做出明文簽章"
#: sm/gpgsm.c:256
msgid "list external keys"
msgstr "列出外部金鑰"
#: sm/gpgsm.c:258
msgid "list certificate chain"
msgstr "列出憑證鏈"
#: sm/gpgsm.c:261
msgid "remove key from the public keyring"
msgstr "從公鑰鑰匙圈裡移除金鑰"
#: sm/gpgsm.c:264
msgid "import certificates"
msgstr "匯入憑證"
#: sm/gpgsm.c:265
msgid "export certificates"
msgstr "匯出憑證"
#: sm/gpgsm.c:266
msgid "register a smartcard"
msgstr "註冊智慧卡"
#: sm/gpgsm.c:268
msgid "pass a command to the dirmngr"
msgstr "將指令遞送給 dirmngr"
#: sm/gpgsm.c:270
msgid "invoke gpg-protect-tool"
msgstr "叫用 gpg-protect-tool"
#: sm/gpgsm.c:271
msgid "change a passphrase"
msgstr "更改密語"
#: sm/gpgsm.c:286
msgid "create base-64 encoded output"
msgstr "建立以 base-64 編碼過的輸出"
#: sm/gpgsm.c:290
msgid "assume input is in PEM format"
msgstr "假設輸入的是 PEM 格式"
#: sm/gpgsm.c:292
msgid "assume input is in base-64 format"
msgstr "假設輸入的是 base-64 格式"
#: sm/gpgsm.c:294
msgid "assume input is in binary format"
msgstr "假設輸入的是二進制格式"
#: sm/gpgsm.c:299
msgid "use system's dirmngr if available"
msgstr "如果系統有 dirmngr 的話就拿來用"
#: sm/gpgsm.c:300
msgid "never consult a CRL"
msgstr "永遠不要查閱 CRL"
#: sm/gpgsm.c:307
msgid "check validity using OCSP"
msgstr "用 OCSP 檢查有效性"
#: sm/gpgsm.c:312
msgid "|N|number of certificates to include"
msgstr "|N|要包含的憑證數量"
#: sm/gpgsm.c:315
msgid "|FILE|take policy information from FILE"
msgstr "|檔案|從「檔案」中取得原則資訊"
#: sm/gpgsm.c:318
msgid "do not check certificate policies"
msgstr "不要檢查憑證原則"
#: sm/gpgsm.c:322
msgid "fetch missing issuer certificates"
msgstr "取回遺失的發行者憑證"
#: sm/gpgsm.c:326
msgid "|NAME|use NAME as default recipient"
msgstr "|名字|使用「名字」做為預設收件者"
#: sm/gpgsm.c:328
msgid "use the default key as default recipient"
msgstr "使用預設的金鑰做為預設的收件者"
#: sm/gpgsm.c:345
msgid "don't use the terminal at all"
msgstr "完全不要使用終端機"
#: sm/gpgsm.c:346
msgid "|FILE|write a server mode log to FILE"
msgstr "|檔案|將伺服器模式日誌寫入至「檔案」"
#: sm/gpgsm.c:348
msgid "|FILE|write an audit log to FILE"
msgstr "|檔案|將稽核日誌寫入至「檔案」"
#: sm/gpgsm.c:350
msgid "force v3 signatures"
msgstr "強迫使用第三版簽章"
#: sm/gpgsm.c:351
msgid "always use a MDC for encryption"
msgstr "總是使用 MDC 來加密"
#: sm/gpgsm.c:356
msgid "batch mode: never ask"
msgstr "批次模式: 永遠不詢問"
#: sm/gpgsm.c:357
msgid "assume yes on most questions"
msgstr "假設大部分的問題都回答是"
#: sm/gpgsm.c:358
msgid "assume no on most questions"
msgstr "假設大部分的問題都回答否"
#: sm/gpgsm.c:360
msgid "add this keyring to the list of keyrings"
msgstr "將此金鑰鑰匙圈加到金鑰鑰匙圈清單中"
#: sm/gpgsm.c:361
msgid "add this secret keyring to the list"
msgstr "將此私鑰鑰匙圈加到清單中"
#: sm/gpgsm.c:362 tools/gpgconf-comp.c:645 tools/gpgconf-comp.c:707
msgid "|NAME|use NAME as default secret key"
msgstr "|名字|使用「名字」做為預設私鑰"
#: sm/gpgsm.c:363
msgid "|HOST|use this keyserver to lookup keys"
msgstr "|主機|使用此金鑰伺服器來查找金鑰"
#: sm/gpgsm.c:364
msgid "|NAME|set terminal charset to NAME"
msgstr "|名稱|將終端機字元集設為「名稱」"
#: sm/gpgsm.c:368
msgid "|LEVEL|set the debugging level to LEVEL"
msgstr "|等級|設定除錯等級為「等級」"
#: sm/gpgsm.c:383
msgid "|FILE|load extension module FILE"
msgstr "|檔案|載入延伸模組「檔案」"
#: sm/gpgsm.c:389
msgid "|NAME|use cipher algorithm NAME"
msgstr "|名稱|使用「名稱」編密演算法"
#: sm/gpgsm.c:391
msgid "|NAME|use message digest algorithm NAME"
msgstr "|名稱|使用「名稱」訊息摘要演算法"
#: sm/gpgsm.c:394
msgid "|N|use compress algorithm N"
msgstr "|N|使用壓縮演算法 N"
#: sm/gpgsm.c:575
msgid "Usage: gpgsm [options] [files] (-h for help)"
msgstr "用法: gpgsm [選項] [檔案] (或用 -h 求助)"
#: sm/gpgsm.c:578
msgid ""
"Syntax: gpgsm [options] [files]\n"
"sign, check, encrypt or decrypt using the S/MIME protocol\n"
"default operation depends on the input data\n"
msgstr ""
"語法: gpgsm [選項] [檔案]\n"
"用 S/MIME 協定來簽署, 檢查, 加密或解密\n"
"預設的操作會依輸入資料而定\n"
#: sm/gpgsm.c:705
msgid "usage: gpgsm [options] "
msgstr "用法: gpgsm [選項] "
#: sm/gpgsm.c:803
#, c-format
msgid "NOTE: won't be able to encrypt to `%s': %s\n"
msgstr "請注意: 將無法加密為 `%s': %s\n"
#: sm/gpgsm.c:814
#, c-format
msgid "unknown validation model `%s'\n"
msgstr "未知的驗證模型 `%s'\n"
#: sm/gpgsm.c:1386
msgid "WARNING: running with faked system time: "
msgstr "警告: 正在偽造的系統時間中執行: "
#: sm/gpgsm.c:1488
#, c-format
msgid "importing common certificates `%s'\n"
msgstr "正在匯入通用憑證 `%s'\n"
#: sm/gpgsm.c:1526
#, c-format
msgid "can't sign using `%s': %s\n"
msgstr "無法用 `%s' 來簽署: %s\n"
#: sm/gpgsm.c:1710
msgid "this command has not yet been implemented\n"
msgstr "這個指令尚未實做完成\n"
#: sm/import.c:109
#, c-format
msgid "total number processed: %lu\n"
msgstr "處理總量: %lu\n"
#: sm/import.c:227
msgid "error storing certificate\n"
msgstr "存放憑證時出錯\n"
#: sm/import.c:235
msgid "basic certificate checks failed - not imported\n"
msgstr "基本的憑證檢查失敗了 - 未匯入\n"
#: sm/import.c:421 sm/import.c:453
#, c-format
msgid "error importing certificate: %s\n"
msgstr "匯入憑證時出錯: %s\n"
#: sm/import.c:542 tools/gpg-connect-agent.c:1274
#, c-format
msgid "error reading input: %s\n"
msgstr "讀取輸入時出錯: %s\n"
#: sm/keydb.c:188
#, c-format
msgid "error creating keybox `%s': %s\n"
msgstr "建立金鑰鑰匙盒 `%s' 時出錯: %s\n"
#: sm/keydb.c:191
msgid "you may want to start the gpg-agent first\n"
msgstr "你可能會先想啟動 gpg-agent\n"
#: sm/keydb.c:196
#, c-format
msgid "keybox `%s' created\n"
msgstr "`%s' 鑰匙盒已建立\n"
#: sm/keydb.c:1310 sm/keydb.c:1378
msgid "failed to get the fingerprint\n"
msgstr "取得指紋失敗\n"
#: sm/keydb.c:1317 sm/keydb.c:1385
msgid "failed to allocate keyDB handle\n"
msgstr "配置 keyDB handle 失敗\n"
#: sm/keydb.c:1338
#, c-format
msgid "problem looking for existing certificate: %s\n"
msgstr "查找既有憑證的問題: %s\n"
#: sm/keydb.c:1346
#, c-format
msgid "error finding writable keyDB: %s\n"
msgstr "尋找可寫入的 keyDB 時出錯: %s\n"
#: sm/keydb.c:1354
#, c-format
msgid "error storing certificate: %s\n"
msgstr "存放憑證時出錯: %s\n"
#: sm/keydb.c:1406
#, c-format
msgid "problem re-searching certificate: %s\n"
msgstr "重新搜尋憑證的問題: %s\n"
#: sm/keydb.c:1415 sm/keydb.c:1507
#, c-format
msgid "error getting stored flags: %s\n"
msgstr "取得已存放的旗標時出錯: %s\n"
#: sm/keydb.c:1427 sm/keydb.c:1518
#, c-format
msgid "error storing flags: %s\n"
msgstr "存放旗標時出錯: %s\n"
#: sm/misc.c:55
msgid "GPG_TTY has not been set - using maybe bogus default\n"
msgstr "尚未設定 GPG_TTY - 使用可能是偽造的預設值\n"
#: sm/qualified.c:105
#, c-format
msgid "invalid formatted fingerprint in `%s', line %d\n"
msgstr "無效的格式化指紋於 `%s', 第 %d 列\n"
#: sm/qualified.c:123
#, c-format
msgid "invalid country code in `%s', line %d\n"
msgstr "無效的國家代碼於 `%s', 第 %d 列\n"
#: sm/qualified.c:200
#, c-format
msgid ""
"You are about to create a signature using your certificate:\n"
"\"%s\"\n"
"This will create a qualified signature by law equated to a handwritten "
"signature.\n"
"\n"
"%s%sAre you really sure that you want to do this?"
msgstr ""
"你正要用你的這個憑證來建立簽章:\n"
"\"%s\"\n"
"這會建立出在法律上與簽名等效的合格簽章.\n"
"\n"
"%s%s請問你是否真的確定要這樣做了?"
#: sm/qualified.c:209 sm/verify.c:604
msgid ""
"Note, that this software is not officially approved to create or verify such "
"signatures.\n"
msgstr "請注意, 本軟體並未正式被認可來建立或驗證這樣的簽章.\n"
#: sm/qualified.c:277
#, c-format
msgid ""
"You are about to create a signature using your certificate:\n"
"\"%s\"\n"
"Note, that this certificate will NOT create a qualified signature!"
msgstr ""
"你正要用你的這個憑證來建立簽章:\n"
"\"%s\"\n"
"請注意, 這個憑證並 不會 建立出合格的簽章!"
#: sm/sign.c:445
#, c-format
msgid "checking for qualified certificate failed: %s\n"
msgstr "檢查合格憑證時失敗: %s\n"
#: sm/verify.c:447
msgid "Signature made "
msgstr "簽章建立於 "
#: sm/verify.c:451
msgid "[date not given]"
msgstr "[ 未給定日期 ]"
#: sm/verify.c:452
#, c-format
msgid " using certificate ID 0x%08lX\n"
msgstr " 以憑證 ID 0x%08lX\n"
#: sm/verify.c:582
msgid "Good signature from"
msgstr "完好的簽章來自於"
#: sm/verify.c:583
msgid " aka"
msgstr " 亦即"
#: sm/verify.c:601
msgid "This is a qualified signature\n"
msgstr "這是一份合格簽章\n"
#: tools/gpg-connect-agent.c:67 tools/gpgconf.c:73 tools/symcryptrun.c:165
msgid "quiet"
msgstr "安靜模式"
#: tools/gpg-connect-agent.c:68
msgid "print data out hex encoded"
msgstr "列印資料超出十六進制編碼範圍"
#: tools/gpg-connect-agent.c:69
msgid "decode received data lines"
msgstr "對已收到的資料列解碼"
#: tools/gpg-connect-agent.c:70
msgid "|NAME|connect to Assuan socket NAME"
msgstr "|名稱|連線至 Assuan socket「名稱」"
#: tools/gpg-connect-agent.c:71
msgid "run the Assuan server given on the command line"
msgstr "執行命令列所給定的 Assuan 伺服器"
#: tools/gpg-connect-agent.c:73
msgid "do not use extended connect mode"
msgstr "不要使用延伸連線模式"
#: tools/gpg-connect-agent.c:74
msgid "|FILE|run commands from FILE on startup"
msgstr "|檔案|啟動時執行「檔案」中的指令"
#: tools/gpg-connect-agent.c:75
msgid "run /subst on startup"
msgstr "啟動時執行 /subst"
#: tools/gpg-connect-agent.c:174
msgid "Usage: gpg-connect-agent [options] (-h for help)"
msgstr "用法: gpg-connect-agent [選項] (或用 -h 求助)"
#: tools/gpg-connect-agent.c:177
msgid ""
"Syntax: gpg-connect-agent [options]\n"
"Connect to a running agent and send commands\n"
msgstr ""
"語法: gpg-connect-agent [選項]\n"
"連線至運作中的代理程式並送出指令\n"
#: tools/gpg-connect-agent.c:1155
#, c-format
msgid "option \"%s\" requires a program and optional arguments\n"
msgstr "\"%s\" 選項需要有程式及選用的引數\n"
#: tools/gpg-connect-agent.c:1164
#, c-format
msgid "option \"%s\" ignored due to \"%s\"\n"
msgstr "\"%s\" 選項因為 \"%s\" 而被忽略了\n"
#: tools/gpg-connect-agent.c:1219 tools/gpg-connect-agent.c:1645
#, c-format
msgid "receiving line failed: %s\n"
msgstr "接收列時失敗: %s\n"
#: tools/gpg-connect-agent.c:1299
msgid "line too long - skipped\n"
msgstr "列太長 - 已跳過\n"
#: tools/gpg-connect-agent.c:1303
msgid "line shortened due to embedded Nul character\n"
msgstr "列因嵌入的 Nul 字符而縮短了\n"
#: tools/gpg-connect-agent.c:1619
#, c-format
msgid "unknown command `%s'\n"
msgstr "未知的指令 `%s'\n"
#: tools/gpg-connect-agent.c:1637
#, c-format
msgid "sending line failed: %s\n"
msgstr "送出列時失敗: %s\n"
#: tools/gpg-connect-agent.c:1986
#, c-format
msgid "error sending %s command: %s\n"
msgstr "送出 `%s' 指令時出錯: %s\n"
#: tools/gpg-connect-agent.c:1995
#, c-format
msgid "error sending standard options: %s\n"
msgstr "送出標準選項時出錯: %s\n"
#: tools/gpgconf-comp.c:459 tools/gpgconf-comp.c:563 tools/gpgconf-comp.c:630
#: tools/gpgconf-comp.c:692 tools/gpgconf-comp.c:773
msgid "Options controlling the diagnostic output"
msgstr "控制著診斷性輸出的選項"
#: tools/gpgconf-comp.c:472 tools/gpgconf-comp.c:576 tools/gpgconf-comp.c:643
#: tools/gpgconf-comp.c:705 tools/gpgconf-comp.c:796
msgid "Options controlling the configuration"
msgstr "控制著組態的選項"
#: tools/gpgconf-comp.c:482 tools/gpgconf-comp.c:601 tools/gpgconf-comp.c:656
#: tools/gpgconf-comp.c:724 tools/gpgconf-comp.c:803
msgid "Options useful for debugging"
msgstr "對除錯有幫助的選項"
#: tools/gpgconf-comp.c:487 tools/gpgconf-comp.c:606 tools/gpgconf-comp.c:661
#: tools/gpgconf-comp.c:729 tools/gpgconf-comp.c:811
msgid "|FILE|write server mode logs to FILE"
msgstr "|檔案|將伺服器模式日誌寫入至「檔案」"
#: tools/gpgconf-comp.c:495 tools/gpgconf-comp.c:611 tools/gpgconf-comp.c:737
msgid "Options controlling the security"
msgstr "控制著安全性的選項"
#: tools/gpgconf-comp.c:502
msgid "|N|expire SSH keys after N seconds"
msgstr "|N|在 N 秒之後讓 SSH 金鑰過期"
#: tools/gpgconf-comp.c:506
msgid "|N|set maximum PIN cache lifetime to N seconds"
msgstr "|N|把 PIN 快取最大生存時間設成 N 秒"
#: tools/gpgconf-comp.c:510
msgid "|N|set maximum SSH key lifetime to N seconds"
msgstr "|N|把 SSH 金鑰最大生存時間設成 N 秒"
#: tools/gpgconf-comp.c:524
msgid "Options enforcing a passphrase policy"
msgstr "強制執行密語原則的選項"
#: tools/gpgconf-comp.c:527
msgid "do not allow to bypass the passphrase policy"
msgstr "不允許略過密語原則"
#: tools/gpgconf-comp.c:531
msgid "|N|set minimal required length for new passphrases to N"
msgstr "|N|把新密語所需的最短長度設成 N"
#: tools/gpgconf-comp.c:535
msgid "|N|require at least N non-alpha characters for a new passphrase"
msgstr "|N|新密語至少要有 N 個非字母的字符"
#: tools/gpgconf-comp.c:539
msgid "|FILE|check new passphrases against pattern in FILE"
msgstr "|檔案|用「檔案」中的樣式來檢查新密語"
#: tools/gpgconf-comp.c:543
msgid "|N|expire the passphrase after N days"
msgstr "|N|在 N 天之後讓密語過期"
#: tools/gpgconf-comp.c:547
msgid "do not allow the reuse of old passphrases"
msgstr "不允許重複使用舊密語"
#: tools/gpgconf-comp.c:648 tools/gpgconf-comp.c:710
msgid "|NAME|encrypt to user ID NAME as well"
msgstr "|名字|也加密給使用者 ID「名字」"
#: tools/gpgconf-comp.c:669
msgid "Configuration for Keyservers"
msgstr "金鑰伺服器組態"
#: tools/gpgconf-comp.c:671
msgid "|URL|use keyserver at URL"
msgstr "|URL|使用位於 URL 的金鑰伺服器"
#: tools/gpgconf-comp.c:674
msgid "allow PKA lookups (DNS requests)"
msgstr "允許 PKA 查找 (DNS 請求)"
#: tools/gpgconf-comp.c:719
msgid "|NAME|use encoding NAME for PKCS#12 passphrases"
msgstr "|名稱|將「名稱」編碼用於 PKCS#12 密語"
#: tools/gpgconf-comp.c:742
msgid "do not check CRLs for root certificates"
msgstr "不要為根憑證檢查 CRL"
#: tools/gpgconf-comp.c:786
msgid "Options controlling the format of the output"
msgstr "控制著輸出格式的選項"
#: tools/gpgconf-comp.c:822
msgid "Options controlling the interactivity and enforcement"
msgstr "控制著互動及強制執行的選項"
#: tools/gpgconf-comp.c:832
msgid "Configuration for HTTP servers"
msgstr "HTTP 伺服器組態"
#: tools/gpgconf-comp.c:843
msgid "use system's HTTP proxy setting"
msgstr "使用系統的 HTTP 代理伺服器設定"
#: tools/gpgconf-comp.c:848
msgid "Configuration of LDAP servers to use"
msgstr "要用的 LDAP 伺服器組態"
#: tools/gpgconf-comp.c:877
msgid "LDAP server list"
msgstr ""
#: tools/gpgconf-comp.c:885
msgid "Configuration for OCSP"
msgstr "OCSP 組態"
#: tools/gpgconf-comp.c:3037
msgid "Note that group specifications are ignored\n"
msgstr "請注意群組規格已忽略\n"
#: tools/gpgconf.c:58
msgid "list all components"
msgstr "列出所有的元件"
#: tools/gpgconf.c:59
msgid "check all programs"
msgstr "檢查所有的程式"
#: tools/gpgconf.c:60
msgid "|COMPONENT|list options"
msgstr "|元件|列出選項"
#: tools/gpgconf.c:61
msgid "|COMPONENT|change options"
msgstr "|元件|變更選項"
#: tools/gpgconf.c:63
msgid "apply global default values"
msgstr "套用全域預設值"
#: tools/gpgconf.c:65
msgid "list global configuration file"
msgstr "列出全域組態檔"
#: tools/gpgconf.c:67
msgid "check global configuration file"
msgstr "檢查全域組態檔案"
#: tools/gpgconf.c:71
msgid "use as output file"
msgstr "當作輸出檔案來使用"
#: tools/gpgconf.c:75
msgid "activate changes at runtime, if possible"
msgstr "如果可能的話, 在執行期啟用變更"
#: tools/gpgconf.c:97
msgid "Usage: gpgconf [options] (-h for help)"
msgstr "用法: gpgconf [選項] (或用 -h 求助)"
#: tools/gpgconf.c:100
msgid ""
"Syntax: gpgconf [options]\n"
"Manage configuration options for tools of the GnuPG system\n"
msgstr ""
"語法: gpgconf [選項]\n"
"管理 GnuPG 系統工具的組態選項\n"
#: tools/gpgconf.c:202 tools/gpgconf.c:240
msgid "usage: gpgconf [options] "
msgstr "用法: gpgconf [選項] "
#: tools/gpgconf.c:204
msgid "Need one component argument"
msgstr "需要一個元件引數"
#: tools/gpgconf.c:213
msgid "Component not found"
msgstr "找不到元件"
#: tools/gpgconf.c:242
msgid "No argument allowed"
msgstr "未允許使用引數"
#: tools/no-libgcrypt.c:30
#, c-format
msgid "error allocating enough memory: %s\n"
msgstr "配置足夠的記憶體時出錯: %s\n"
#: tools/symcryptrun.c:152
msgid ""
"@\n"
"Commands:\n"
" "
msgstr ""
"@\n"
"指令:\n"
" "
#: tools/symcryptrun.c:154
msgid "decryption modus"
msgstr "解密方式"
#: tools/symcryptrun.c:155
msgid "encryption modus"
msgstr "加密方式"
#: tools/symcryptrun.c:159
msgid "tool class (confucius)"
msgstr "工具類別 (confucius)"
#: tools/symcryptrun.c:160
msgid "program filename"
msgstr "程式檔名"
#: tools/symcryptrun.c:162
msgid "secret key file (required)"
msgstr "私鑰檔案 (必要)"
#: tools/symcryptrun.c:163
msgid "input file name (default stdin)"
msgstr "輸入檔名 (預設是標準輸入)"
#: tools/symcryptrun.c:207
msgid "Usage: symcryptrun [options] (-h for help)"
msgstr "用法: symcryptrun [選項] (或用 -h 求助)"
#: tools/symcryptrun.c:210
msgid ""
"Syntax: symcryptrun --class CLASS --program PROGRAM --keyfile KEYFILE "
"[options...] COMMAND [inputfile]\n"
"Call a simple symmetric encryption tool\n"
msgstr ""
"語法: symcryptrun --class 型別 --program 程式 --keyfile 金鑰檔案 [選項...] 指"
"令 [輸入檔案]\n"
"叫用單純對稱式加密工具\n"
#: tools/symcryptrun.c:279
#, c-format
msgid "%s on %s aborted with status %i\n"
msgstr "%s 於 %s 以 %i 狀態中止了\n"
#: tools/symcryptrun.c:286
#, c-format
msgid "%s on %s failed with status %i\n"
msgstr "%s 於 %s 以 %i 狀態失敗了\n"
#: tools/symcryptrun.c:312
#, c-format
msgid "can't create temporary directory `%s': %s\n"
msgstr "無法建立暫存目錄 `%s': %s\n"
#: tools/symcryptrun.c:352 tools/symcryptrun.c:369
#, c-format
msgid "could not open %s for writing: %s\n"
msgstr "無法開啟 %s 來寫入: %s\n"
#: tools/symcryptrun.c:380
#, c-format
msgid "error writing to %s: %s\n"
msgstr "寫入 %s 時出錯: %s\n"
#: tools/symcryptrun.c:387
#, c-format
msgid "error reading from %s: %s\n"
msgstr "讀取 %s 時出錯: %s\n"
#: tools/symcryptrun.c:394 tools/symcryptrun.c:401
#, c-format
msgid "error closing %s: %s\n"
msgstr "關閉 %s 時出錯: %s\n"
#: tools/symcryptrun.c:486
msgid "no --program option provided\n"
msgstr "沒有提供 --program 選項\n"
#: tools/symcryptrun.c:492
msgid "only --decrypt and --encrypt are supported\n"
msgstr "祇支援 --decrypt 和 --encrypt\n"
#: tools/symcryptrun.c:498
msgid "no --keyfile option provided\n"
msgstr "沒有提供 --keyfile 選項\n"
#: tools/symcryptrun.c:509
msgid "cannot allocate args vector\n"
msgstr "無法配置引數向量\n"
#: tools/symcryptrun.c:527
#, c-format
msgid "could not create pipe: %s\n"
msgstr "無法建立管道: %s\n"
#: tools/symcryptrun.c:534
#, c-format
msgid "could not create pty: %s\n"
msgstr "無法建立 pty: %s\n"
#: tools/symcryptrun.c:550
#, c-format
msgid "could not fork: %s\n"
msgstr "無法衍生: %s\n"
#: tools/symcryptrun.c:578
#, c-format
msgid "execv failed: %s\n"
msgstr "execv 失敗: %s\n"
#: tools/symcryptrun.c:607
#, c-format
msgid "select failed: %s\n"
msgstr "挑選失敗: %s\n"
#: tools/symcryptrun.c:624
#, c-format
msgid "read failed: %s\n"
msgstr "讀取失敗: %s\n"
#: tools/symcryptrun.c:676
#, c-format
msgid "pty read failed: %s\n"
msgstr "pty 讀取失敗: %s\n"
#: tools/symcryptrun.c:728
#, c-format
msgid "waitpid failed: %s\n"
msgstr "waitpid 失敗: %s\n"
#: tools/symcryptrun.c:742
#, c-format
msgid "child aborted with status %i\n"
msgstr "子代以 %i 狀態中止了\n"
#: tools/symcryptrun.c:797
#, c-format
msgid "cannot allocate infile string: %s\n"
msgstr "無法配置檔內字串: %s\n"
#: tools/symcryptrun.c:810
#, c-format
msgid "cannot allocate outfile string: %s\n"
msgstr "無法配置檔外字串: %s\n"
#: tools/symcryptrun.c:985
#, c-format
msgid "either %s or %s must be given\n"
msgstr "一定要給定 %s 或 %s 其中之一\n"
#: tools/symcryptrun.c:1012
msgid "no class provided\n"
msgstr "沒有提供類別\n"
#: tools/symcryptrun.c:1021
#, c-format
msgid "class %s is not supported\n"
msgstr "未支援 %s 類別\n"
#: tools/gpg-check-pattern.c:145
msgid "Usage: gpg-check-pattern [options] patternfile (-h for help)\n"
msgstr "用法: gpg-check-pattern [選項] 樣式檔案 (或用 -h 求助)\n"
#: tools/gpg-check-pattern.c:148
msgid ""
"Syntax: gpg-check-pattern [options] patternfile\n"
"Check a passphrase given on stdin against the patternfile\n"
msgstr ""
"語法: gpg-check-pattern [選項] 樣式檔案\n"
"用樣式檔案來檢查由標準輸入給定的密語\n"
#~ msgid "can't gen prime with pbits=%u qbits=%u\n"
#~ msgstr "無法以 %u 位元長的 p 及 %u 位元長的 q 產生質數\n"
#~ msgid "can't generate a prime with less than %d bits\n"
#~ msgstr "無法產生少於 %d 位元的質數\n"
#~ msgid "no entropy gathering module detected\n"
#~ msgstr "偵測不到亂數蒐集模組\n"
#~ msgid "can't lock `%s': %s\n"
#~ msgstr "無法鎖定 `%s': %s\n"
#~ msgid "waiting for lock on `%s'...\n"
#~ msgstr "正在等候 `%s' 鎖定...\n"
#~ msgid "can't stat `%s': %s\n"
#~ msgstr "無法取得檔案 `%s' 的資訊: %s\n"
#~ msgid "`%s' is not a regular file - ignored\n"
#~ msgstr "`%s' 不是一個標準的檔案 - 已略過\n"
#~ msgid "note: random_seed file is empty\n"
#~ msgstr "請注意: random_seed 檔案是空的\n"
#~ msgid "WARNING: invalid size of random_seed file - not used\n"
#~ msgstr "警告: random_seed 檔案大小無效 - 不予採用\n"
#~ msgid "can't read `%s': %s\n"
#~ msgstr "無法讀取 `%s': %s\n"
#~ msgid "note: random_seed file not updated\n"
#~ msgstr "請注意: random_seed 檔案未更新\n"
#~ msgid "can't write `%s': %s\n"
#~ msgstr "無法寫入 `%s': %s\n"
#~ msgid "can't close `%s': %s\n"
#~ msgstr "無法關閉 `%s': %s\n"
#~ msgid "WARNING: using insecure random number generator!!\n"
#~ msgstr "警告: 正在使用不安全的隨機數字產生器!!\n"
#~ msgid ""
#~ "The random number generator is only a kludge to let\n"
#~ "it run - it is in no way a strong RNG!\n"
#~ "\n"
#~ "DON'T USE ANY DATA GENERATED BY THIS PROGRAM!!\n"
#~ "\n"
#~ msgstr ""
#~ "這個隨機數字產生器根本就是七拼八湊出來的鳥東西 -\n"
#~ "它根本就不是強而有力的亂數產生器!\n"
#~ "\n"
#~ "*** 絕對不要把這個程式產生的任何資料拿來用!! ***\n"
#~ "\n"
#~ msgid ""
#~ "Please wait, entropy is being gathered. Do some work if it would\n"
#~ "keep you from getting bored, because it will improve the quality\n"
#~ "of the entropy.\n"
#~ msgstr ""
#~ "請稍待片刻, 系統此時正在蒐集亂數. 如果你會覺得無聊的話,\n"
#~ "不妨做些別的事, 這樣子甚至能夠讓亂數的品質更好.\n"
#~ msgid ""
#~ "\n"
#~ "Not enough random bytes available. Please do some other work to give\n"
#~ "the OS a chance to collect more entropy! (Need %d more bytes)\n"
#~ msgstr ""
#~ "\n"
#~ "隨機位元組不夠多. 請多做一些有的沒的事情, \n"
#~ "這樣作業系統纔能蒐集到更多的亂數! (還需要 %d 位元組)\n"
#~ msgid "card reader not available\n"
#~ msgstr "沒有讀卡機可用\n"
#~ msgid "Please insert the card and hit return or enter 'c' to cancel: "
#~ msgstr "請插入卡片並按下 [Enter], 或者輸入 'c' 取消: "
#~ msgid ""
#~ "Please remove the current card and insert the one with serial number:\n"
#~ " %.*s\n"
#~ msgstr ""
#~ "請移除現用中的卡片並插入下列序號的卡片:\n"
#~ " %.*s\n"
#~ msgid "Hit return when ready or enter 'c' to cancel: "
#~ msgstr "準備好時請按下 [Enter], 或者輸入 'c' 取消: "
#~ msgid "Enter New Admin PIN: "
#~ msgstr "請輸入新的管理者 PIN: "
#~ msgid "Enter New PIN: "
#~ msgstr "請輸入新的 PIN: "
#~ msgid "Enter Admin PIN: "
#~ msgstr "請輸入管理者 PIN: "
#~ msgid "cipher extension `%s' not loaded due to unsafe permissions\n"
#~ msgstr "編密法延伸模組 `%s' 因為權限不安全而未載入\n"
#~ msgid "NOTE: %s is not available in this version\n"
#~ msgstr "請注意: %s 在本版中無法使用\n"
#~ msgid "-k[v][v][v][c] [user-id] [keyring]"
#~ msgstr "-k[v][v][v][c] [使用者ID] [鑰匙圈]"
#~ msgid ""
#~ "It's up to you to assign a value here; this value will never be exported\n"
#~ "to any 3rd party. We need it to implement the web-of-trust; it has "
#~ "nothing\n"
#~ "to do with the (implicitly created) web-of-certificates."
#~ msgstr ""
#~ "在這裡指派的數值完全是看你自己決定; 這些數值永遠不會匯出給其他人.\n"
#~ "我們需要它來實施信任網絡; 這跟 (自動建立起的) 憑證網絡一點關係也沒有."
#~ msgid ""
#~ "To build the Web-of-Trust, GnuPG needs to know which keys are\n"
#~ "ultimately trusted - those are usually the keys for which you have\n"
#~ "access to the secret key. Answer \"yes\" to set this key to\n"
#~ "ultimately trusted\n"
#~ msgstr ""
#~ "要建立起信任網絡, GnuPG 需要知道哪些金鑰是被徹底信任的 -\n"
#~ "那些金鑰通常就是你有辦法存取到私鑰的. 回答 \"yes\" 來將這些\n"
#~ "金鑰設成徹底信任\n"
#~ msgid "If you want to use this untrusted key anyway, answer \"yes\"."
#~ msgstr "如果你無論如何都想要用這把未被信任的金鑰, 請回答 \"yes\"."
#~ msgid ""
#~ "Enter the user ID of the addressee to whom you want to send the message."
#~ msgstr "輸入你要遞送的訊息接收者的使用者 ID."
#~ msgid ""
#~ "Select the algorithm to use.\n"
#~ "\n"
#~ "DSA (aka DSS) is the Digital Signature Algorithm and can only be used\n"
#~ "for signatures.\n"
#~ "\n"
#~ "Elgamal is an encrypt-only algorithm.\n"
#~ "\n"
#~ "RSA may be used for signatures or encryption.\n"
#~ "\n"
#~ "The first (primary) key must always be a key which is capable of signing."
#~ msgstr ""
#~ "請選擇要使用的演算法.\n"
#~ "\n"
#~ "DSA (亦即 DSS) 是數位簽章演算法 (Digital Signature Algorithm),\n"
#~ "祇能用於簽署.\n"
#~ "\n"
#~ "Elgamal 是祇能用於加密的演算法.\n"
#~ "\n"
#~ "RSA 可以被用來簽署及加密.\n"
#~ "\n"
#~ "第一把 (主要的) 金鑰一定要含有能用於簽署的金鑰."
#~ msgid ""
#~ "In general it is not a good idea to use the same key for signing and\n"
#~ "encryption. This algorithm should only be used in certain domains.\n"
#~ "Please consult your security expert first."
#~ msgstr ""
#~ "通常來說用同一把金鑰簽署及加密並不是個好主意.\n"
#~ "這個演算法應該祇被用於特定的情況下.\n"
#~ "請先聯絡你的安全專家."
#~ msgid "Enter the size of the key"
#~ msgstr "請輸入金鑰尺寸"
#~ msgid "Answer \"yes\" or \"no\""
#~ msgstr "請回答 \"yes\" 或 \"no\""
#~ msgid ""
#~ "Enter the required value as shown in the prompt.\n"
#~ "It is possible to enter a ISO date (YYYY-MM-DD) but you won't\n"
#~ "get a good error response - instead the system tries to interpret\n"
#~ "the given value as an interval."
#~ msgstr ""
#~ "請輸入提示裡所要求的數值.\n"
#~ "你可以輸入 ISO 日期格式 (YYYY-MM-DD), 但是不會得到良好的錯誤回應 -\n"
#~ "反之, 系統會試著把給定的數值中斷成若干片段."
#~ msgid "Enter the name of the key holder"
#~ msgstr "請輸入金鑰持有人的名字"
#~ msgid "please enter an optional but highly suggested email address"
#~ msgstr "請輸入選用 (但強烈建議使用) 的電子郵件位址"
#~ msgid "Please enter an optional comment"
#~ msgstr "請輸入選用的註釋"
#~ msgid ""
#~ "N to change the name.\n"
#~ "C to change the comment.\n"
#~ "E to change the email address.\n"
#~ "O to continue with key generation.\n"
#~ "Q to to quit the key generation."
#~ msgstr ""
#~ "N 修改姓名.\n"
#~ "C 修改註釋.\n"
#~ "E 修改電子郵件位址.\n"
#~ "O 繼續產生金鑰.\n"
#~ "Q 中止產生金鑰."
#~ msgid ""
#~ "Answer \"yes\" (or just \"y\") if it is okay to generate the sub key."
#~ msgstr "如果你覺得可以產生子鑰的話, 就回答 \"yes\" (或者祇 \"y\" 就好)."
#~ msgid ""
#~ "When you sign a user ID on a key, you should first verify that the key\n"
#~ "belongs to the person named in the user ID. It is useful for others to\n"
#~ "know how carefully you verified this.\n"
#~ "\n"
#~ "\"0\" means you make no particular claim as to how carefully you verified "
#~ "the\n"
#~ " key.\n"
#~ "\n"
#~ "\"1\" means you believe the key is owned by the person who claims to own "
#~ "it\n"
#~ " but you could not, or did not verify the key at all. This is useful "
#~ "for\n"
#~ " a \"persona\" verification, where you sign the key of a pseudonymous "
#~ "user.\n"
#~ "\n"
#~ "\"2\" means you did casual verification of the key. For example, this "
#~ "could\n"
#~ " mean that you verified the key fingerprint and checked the user ID on "
#~ "the\n"
#~ " key against a photo ID.\n"
#~ "\n"
#~ "\"3\" means you did extensive verification of the key. For example, this "
#~ "could\n"
#~ " mean that you verified the key fingerprint with the owner of the key "
#~ "in\n"
#~ " person, and that you checked, by means of a hard to forge document "
#~ "with a\n"
#~ " photo ID (such as a passport) that the name of the key owner matches "
#~ "the\n"
#~ " name in the user ID on the key, and finally that you verified (by "
#~ "exchange\n"
#~ " of email) that the email address on the key belongs to the key "
#~ "owner.\n"
#~ "\n"
#~ "Note that the examples given above for levels 2 and 3 are *only* "
#~ "examples.\n"
#~ "In the end, it is up to you to decide just what \"casual\" and \"extensive"
#~ "\"\n"
#~ "mean to you when you sign other keys.\n"
#~ "\n"
#~ "If you don't know what the right answer is, answer \"0\"."
#~ msgstr ""
#~ "當你要在金鑰上簽署使用者 ID 時, 你首先必須先驗證那把金鑰\n"
#~ "確實屬於那個使用者 ID 上叫那個名字的人. 這對那些知道你多\n"
#~ "小心驗證的人來說很有用.\n"
#~ "\n"
#~ "\"0\" 表示你不能提出任何特別的主張來表明\n"
#~ " 你多仔細驗證那把金鑰\n"
#~ "\n"
#~ "\"1\" 表示你相信這把金鑰屬於那個主張是主人的人,\n"
#~ " 但是你不能或沒有驗證那把金鑰.\n"
#~ " 這對那些祇想要 \"個人的\" 驗證的人來說很有用,\n"
#~ " 因為你簽署了一把擬似匿名使用者的金鑰.\n"
#~ "\n"
#~ "\"2\" 表示你真的仔細驗證了那把金鑰.\n"
#~ " 例如說, 這能表示你驗證了這把金鑰的指紋和\n"
#~ " 使用者 ID, 並比對了照片 ID.\n"
#~ "\n"
#~ "\"3\" 表示你真的做了大規模的驗證金鑰工作.\n"
#~ " 例如說, 這能表示你向金鑰持有人驗證了金鑰指紋,\n"
#~ " 而且你透過附帶照片而難以偽造的文件 (像是護照)\n"
#~ " 確認了金鑰持有人的姓名與金鑰上使用者 ID 的一致,\n"
#~ " 最後你還 (透過電子郵件往來) 驗證了金鑰上的\n"
#~ " 電子郵件位址確實屬於金鑰持有人.\n"
#~ "\n"
#~ "請注意上述關於等級 2 和 3 的例子 \"祇是\" 例子而已.\n"
#~ "最後, 還是得由你自己決定當你簽署其他金鑰時,\n"
#~ "甚麼是 \"漫不經心\", 而甚麼是 \"超級謹慎\".\n"
#~ "\n"
#~ "如果你不知道應該選甚麼答案的話, 就選 \"0\"."
#~ msgid "Answer \"yes\" if you want to sign ALL the user IDs"
#~ msgstr "如果你想要簽署 *所有* 使用者 ID 的話就回答 \"yes\""
#~ msgid ""
#~ "Answer \"yes\" if you really want to delete this user ID.\n"
#~ "All certificates are then also lost!"
#~ msgstr ""
#~ "如果你真的想要刪除這個使用者 ID 的話就回答 \"yes\".\n"
#~ "所有的憑證在那之後也都會失去!"
#~ msgid "Answer \"yes\" if it is okay to delete the subkey"
#~ msgstr "如果可以刪除這把子鑰的話就回答 \"yes\""
#~ msgid ""
#~ "This is a valid signature on the key; you normally don't want\n"
#~ "to delete this signature because it may be important to establish a\n"
#~ "trust connection to the key or another key certified by this key."
#~ msgstr ""
#~ "這是一份在這把金鑰上的有效簽章; 通常你不會想要刪除這份簽章,\n"
#~ "因為要跟這把金鑰或其他由這把金鑰所驗證的金鑰建立起信任連結\n"
#~ "時, 會相當重要."
#~ msgid ""
#~ "This signature can't be checked because you don't have the\n"
#~ "corresponding key. You should postpone its deletion until you\n"
#~ "know which key was used because this signing key might establish\n"
#~ "a trust connection through another already certified key."
#~ msgstr ""
#~ "這份簽章無法被檢驗, 因為你沒有符合的金鑰. 你應該延緩刪除它,\n"
#~ "直到你知道哪一把金鑰被使用了; 因為這把來簽署的金鑰可能透過\n"
#~ "其他已經驗證的金鑰建立了一個信任連結."
#~ msgid ""
#~ "The signature is not valid. It does make sense to remove it from\n"
#~ "your keyring."
#~ msgstr "這份簽章無效. 從你的鑰匙圈中將它移除相當合理."
#~ msgid ""
#~ "This is a signature which binds the user ID to the key. It is\n"
#~ "usually not a good idea to remove such a signature. Actually\n"
#~ "GnuPG might not be able to use this key anymore. So do this\n"
#~ "only if this self-signature is for some reason not valid and\n"
#~ "a second one is available."
#~ msgstr ""
#~ "這是一份和這個金鑰使用者 ID 相繫的簽章. 通常\n"
#~ "把這樣的簽章移除不會是個好點子. 事實上 GnuPG\n"
#~ "可能從此就不能再使用這把金鑰了. 所以祇有在這\n"
#~ "把金鑰的第一個自我簽章因某些原因無效, 而第二\n"
#~ "個還可用的情況下纔這麼做."
#~ msgid ""
#~ "Change the preferences of all user IDs (or just of the selected ones)\n"
#~ "to the current list of preferences. The timestamp of all affected\n"
#~ "self-signatures will be advanced by one second.\n"
#~ msgstr ""
#~ "變更所有 (或祇有被選取的那幾個) 使用者 ID 的偏好成現用的偏好清單.\n"
#~ "所有受到影響的自我簽章的時間戳記都會增加一秒鐘.\n"
#~ msgid ""
#~ "Please repeat the last passphrase, so you are sure what you typed in."
#~ msgstr "請再次輸入最後的密語, 以確定你到底鍵入了些甚麼."
#~ msgid "Give the name of the file to which the signature applies"
#~ msgstr "請給定簽章所要套用的檔案名稱"
#~ msgid "Answer \"yes\" if it is okay to overwrite the file"
#~ msgstr "如果可以覆寫這個檔案的話就回答 \"yes\""
#~ msgid ""
#~ "Please enter a new filename. If you just hit RETURN the default\n"
#~ "file (which is shown in brackets) will be used."
#~ msgstr ""
#~ "請輸入一個新的檔名. 如果你直接按下 Enter, 那麼就\n"
#~ "會使用預設的檔案 (顯示在括號中)."
#~ msgid ""
#~ "You should specify a reason for the certification. Depending on the\n"
#~ "context you have the ability to choose from this list:\n"
#~ " \"Key has been compromised\"\n"
#~ " Use this if you have a reason to believe that unauthorized persons\n"
#~ " got access to your secret key.\n"
#~ " \"Key is superseded\"\n"
#~ " Use this if you have replaced this key with a newer one.\n"
#~ " \"Key is no longer used\"\n"
#~ " Use this if you have retired this key.\n"
#~ " \"User ID is no longer valid\"\n"
#~ " Use this to state that the user ID should not longer be used;\n"
#~ " this is normally used to mark an email address invalid.\n"
#~ msgstr ""
#~ "你應該為這份憑證指定一個原因.\n"
#~ "根據情境的不同, 你應該可以從這個清單中選出一項:\n"
#~ " \"金鑰已經被洩漏了\"\n"
#~ " 如果你相信有某個未經許可的傢伙取得了你的私鑰,\n"
#~ " 就選這個.\n"
#~ " \"金鑰被代換了\"\n"
#~ " 如果你把金鑰換成新的了, 就選這個.\n"
#~ " \"金鑰不再被使用了\"\n"
#~ " 如果你已經撤回了這把金鑰, 就選這個.\n"
#~ " \"使用者 ID 不再有效了\"\n"
#~ " 如果這個使用者 ID 不再被使用了, 就選這個;\n"
#~ " 這通常用來表示某個電子郵件位址不再有效了.\n"
#~ msgid ""
#~ "If you like, you can enter a text describing why you issue this\n"
#~ "revocation certificate. Please keep this text concise.\n"
#~ "An empty line ends the text.\n"
#~ msgstr ""
#~ "你也可以輸入一串文字來描述為甚麼發佈這份撤銷憑證的理由.\n"
#~ "請讓這段文字保持簡明扼要.\n"
#~ "用空白列來結束這段文字.\n"
#~ msgid " algorithms on these user IDs:\n"
#~ msgstr " 無法使用:\n"
#~ msgid "can't query passphrase in batch mode\n"
#~ msgstr "無法在批次模式中查詢密語\n"
#~ msgid "Enter passphrase: "
#~ msgstr "請輸入密語: "
#~ msgid "Repeat passphrase: "
#~ msgstr "請再輸入一次密語: "
#~ msgid "no photo viewer set\n"
#~ msgstr "沒有設定照片檢視程式\n"
#~ msgid "general error"
#~ msgstr "一般性錯誤"
#~ msgid "unknown packet type"
#~ msgstr "未知的封包型態"
#~ msgid "unknown pubkey algorithm"
#~ msgstr "未知的公鑰演算法"
#~ msgid "unknown digest algorithm"
#~ msgstr "未知的摘要演算法"
#~ msgid "bad public key"
#~ msgstr "損壞的公鑰"
#~ msgid "bad secret key"
#~ msgstr "損壞的私鑰"
#~ msgid "bad signature"
#~ msgstr "損壞的簽章"
#~ msgid "checksum error"
#~ msgstr "加總檢查錯誤"
#~ msgid "can't open the keyring"
#~ msgstr "沒辦法開啟鑰匙圈"
#~ msgid "invalid packet"
#~ msgstr "無效的封包"
#~ msgid "invalid armor"
#~ msgstr "無效的封裝"
#~ msgid "no such user id"
#~ msgstr "沒有這個使用者 ID"
#~ msgid "wrong secret key used"
#~ msgstr "用了錯誤的私鑰"
#~ msgid "not supported"
#~ msgstr "未支援"
#~ msgid "bad key"
#~ msgstr "損壞的金鑰"
#~ msgid "file write error"
#~ msgstr "檔案寫入錯誤"
#~ msgid "file open error"
#~ msgstr "檔案開啟錯誤"
#~ msgid "file create error"
#~ msgstr "檔案建立錯誤"
#~ msgid "invalid passphrase"
#~ msgstr "無效的密語"
#~ msgid "unimplemented pubkey algorithm"
#~ msgstr "尚未實做的公鑰演算法"
#~ msgid "unimplemented cipher algorithm"
#~ msgstr "尚未實做的編密演算法"
#~ msgid "unknown signature class"
#~ msgstr "未知的簽章層級"
#~ msgid "trust database error"
#~ msgstr "信任資料庫錯誤"
#~ msgid "resource limit"
#~ msgstr "資源限制"
#~ msgid "invalid keyring"
#~ msgstr "無效的鑰匙圈"
#~ msgid "malformed user id"
#~ msgstr "變造過的使用者 ID"
#~ msgid "file close error"
#~ msgstr "檔案關閉錯誤"
#~ msgid "file rename error"
#~ msgstr "檔案更名錯誤"
#~ msgid "file delete error"
#~ msgstr "檔案刪除錯誤"
#~ msgid "unexpected data"
#~ msgstr "未預期的資料"
#~ msgid "timestamp conflict"
#~ msgstr "時間戳印有矛盾"
#~ msgid "unusable pubkey algorithm"
#~ msgstr "無法使用的公鑰演算法"
#~ msgid "file exists"
#~ msgstr "檔案已存在"
#~ msgid "weak key"
#~ msgstr "金鑰薄弱"
#~ msgid "bad URI"
#~ msgstr "損壞的 URI"
#~ msgid "unsupported URI"
#~ msgstr "未支援的 URI"
#~ msgid "network error"
#~ msgstr "網路錯誤"
#~ msgid "not processed"
#~ msgstr "未處理"
#~ msgid "unusable public key"
#~ msgstr "不可用的公鑰"
#~ msgid "unusable secret key"
#~ msgstr "不可用的私鑰"
#~ msgid "keyserver error"
#~ msgstr "金鑰伺服器錯誤"
#~ msgid "no card"
#~ msgstr "沒有卡片"
#~ msgid "no data"
#~ msgstr "沒有資料"
#~ msgid "ERROR: "
#~ msgstr "錯誤: "
#~ msgid "WARNING: "
#~ msgstr "警告: "
#~ msgid "... this is a bug (%s:%d:%s)\n"
#~ msgstr "... 這是個瑕疵 (%s:%d:%s)\n"
#~ msgid "WARNING: using insecure memory!\n"
#~ msgstr "警告: 正在使用不安全的記憶體!\n"
#~ msgid "please see http://www.gnupg.org/faq.html for more information\n"
#~ msgstr "請參考 http://www.gnupg.org/faq.html 上進一步的資訊\n"
#~ msgid "operation is not possible without initialized secure memory\n"
#~ msgstr "尚未啟用安全的記憶體時, 不可能進行操作\n"
#~ msgid "(you may have used the wrong program for this task)\n"
#~ msgstr "(也許你選錯程式來做這件事了)\n"
#~ msgid "can't put notation data into v3 (PGP 2.x style) signatures\n"
#~ msgstr "無法在 v3 (PGP 2.x 型態) 的簽章內放入標記資料\n"
#~ msgid "can't put notation data into v3 (PGP 2.x style) key signatures\n"
#~ msgstr "無法在 v3 (PGP 2.x 型態) 的金鑰簽章內放入標記資料\n"
#~ msgid "can't put a policy URL into v3 (PGP 2.x style) signatures\n"
#~ msgstr "無法在 v3 (PGP 2.x 型態) 的簽章內放入原則 URL\n"
#~ msgid "can't put a policy URL into v3 key (PGP 2.x style) signatures\n"
#~ msgstr "無法在 v3 (PGP 2.x 型態) 的金鑰簽章內放入原則 URL\n"
#~ msgid ""
#~ "please see http://www.gnupg.org/why-not-idea.html for more information\n"
#~ msgstr "請參考 http://www.gnupg.org/why-not-idea.html 取得更多資訊\n"
#~ msgid "DSA requires the use of a 160 bit hash algorithm\n"
#~ msgstr "DSA 要求使用 160 位元的雜湊演算法\n"