1
0
mirror of git://git.gnupg.org/gnupg.git synced 2024-06-01 22:28:02 +02:00
gnupg/scd/apdu.h
NIIBE Yutaka f9882d8336 scd: Simplify monitoring card removal.
* scd/apdu.c (struct reader_table_s): Remove any_status, last_status,
status, and change_counter field.
(new_reader_slot, dump_reader_status, ct_activate_card, open_ct_reader)
(connect_pcsc_card, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, apdu_reset): Follow the change.
(ct_dump_reader_status): Remove.
(apdu_get_status_internal, apdu_get_status): Remove CHANGED arg.
(apdu_connect): Follow the change.
* scd/command.c (struct vreader_s): Remove reset_failed, any, and
changed field.
(cmd_getinfo, update_reader_status_file): Follow the change.

--

In the past, scdaemon monitors card insertion (as well as removal), so
the code has been complicated, and there has been duplication in two
layers.  Now, it only monitors card removal, it's now simplified.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
2016-12-28 11:14:29 +09:00

138 lines
5.5 KiB
C

/* apdu.h - ISO 7816 APDU functions and low level I/O
* Copyright (C) 2003, 2008 Free Software Foundation, Inc.
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <https://www.gnu.org/licenses/>.
*
* $Id$
*/
#ifndef APDU_H
#define APDU_H
/* ISO 7816 values for the statusword are defined here because they
should not be visible to the users of the actual ISO command
API. */
enum {
SW_MORE_DATA = 0x6100, /* Note: that the low byte must be
masked of.*/
SW_EOF_REACHED = 0x6282,
SW_TERM_STATE = 0x6285, /* Selected file is in termination state. */
SW_EEPROM_FAILURE = 0x6581,
SW_WRONG_LENGTH = 0x6700,
SW_SM_NOT_SUP = 0x6882, /* Secure Messaging is not supported. */
SW_CC_NOT_SUP = 0x6884, /* Command Chaining is not supported. */
SW_CHV_WRONG = 0x6982,
SW_CHV_BLOCKED = 0x6983,
SW_REF_DATA_INV = 0x6984, /* Referenced data invalidated. */
SW_USE_CONDITIONS = 0x6985,
SW_BAD_PARAMETER = 0x6a80, /* (in the data field) */
SW_NOT_SUPPORTED = 0x6a81,
SW_FILE_NOT_FOUND = 0x6a82,
SW_RECORD_NOT_FOUND = 0x6a83,
SW_NOT_ENOUGH_MEMORY= 0x6a84, /* Not enough memory space in the file. */
SW_INCONSISTENT_LC = 0x6a85, /* Lc inconsistent with TLV structure. */
SW_INCORRECT_P0_P1 = 0x6a86,
SW_BAD_LC = 0x6a87, /* Lc does not match command or p1/p2. */
SW_REF_NOT_FOUND = 0x6a88,
SW_BAD_P0_P1 = 0x6b00,
SW_EXACT_LENGTH = 0x6c00,
SW_INS_NOT_SUP = 0x6d00,
SW_CLA_NOT_SUP = 0x6e00,
SW_SUCCESS = 0x9000,
/* The following statuswords are no real ones but used to map host
OS errors into status words. A status word is 16 bit so that
those values can't be issued by a card. */
SW_HOST_OUT_OF_CORE = 0x10001, /* No way yet to differentiate
between errnos on a failed malloc. */
SW_HOST_INV_VALUE = 0x10002,
SW_HOST_INCOMPLETE_CARD_RESPONSE = 0x10003,
SW_HOST_NO_DRIVER = 0x10004,
SW_HOST_NOT_SUPPORTED = 0x10005,
SW_HOST_LOCKING_FAILED= 0x10006,
SW_HOST_BUSY = 0x10007,
SW_HOST_NO_CARD = 0x10008,
SW_HOST_CARD_INACTIVE = 0x10009,
SW_HOST_CARD_IO_ERROR = 0x1000a,
SW_HOST_GENERAL_ERROR = 0x1000b,
SW_HOST_NO_READER = 0x1000c,
SW_HOST_ABORTED = 0x1000d,
SW_HOST_NO_PINPAD = 0x1000e,
SW_HOST_ALREADY_CONNECTED = 0x1000f
};
#define SW_EXACT_LENGTH_P(a) (((a)&~0xff) == SW_EXACT_LENGTH)
/* Bit flags for the card status. */
#define APDU_CARD_USABLE (1) /* Card is present and ready for use. */
#define APDU_CARD_PRESENT (2) /* Card is just present. */
#define APDU_CARD_ACTIVE (4) /* Card is active. */
/* Note, that apdu_open_reader returns no status word but -1 on error. */
int apdu_open_reader (const char *portstr);
int apdu_open_remote_reader (const char *portstr,
const unsigned char *cookie, size_t length,
int (*readfnc) (void *opaque,
void *buffer, size_t size),
void *readfnc_value,
int (*writefnc) (void *opaque,
const void *buffer, size_t size),
void *writefnc_value,
void (*closefnc) (void *opaque),
void *closefnc_value);
int apdu_close_reader (int slot);
void apdu_prepare_exit (void);
int apdu_enum_reader (int slot, int *used);
unsigned char *apdu_get_atr (int slot, size_t *atrlen);
const char *apdu_strerror (int rc);
/* These APDU functions return status words. */
int apdu_connect (int slot);
int apdu_disconnect (int slot);
int apdu_set_progress_cb (int slot, gcry_handler_progress_t cb, void *cb_arg);
int apdu_reset (int slot);
int apdu_get_status (int slot, int hang, unsigned int *status);
int apdu_check_pinpad (int slot, int command, pininfo_t *pininfo);
int apdu_pinpad_verify (int slot, int class, int ins, int p0, int p1,
pininfo_t *pininfo);
int apdu_pinpad_modify (int slot, int class, int ins, int p0, int p1,
pininfo_t *pininfo);
int apdu_send_simple (int slot, int extended_mode,
int class, int ins, int p0, int p1,
int lc, const char *data);
int apdu_send (int slot, int extended_mode,
int class, int ins, int p0, int p1, int lc, const char *data,
unsigned char **retbuf, size_t *retbuflen);
int apdu_send_le (int slot, int extended_mode,
int class, int ins, int p0, int p1,
int lc, const char *data, int le,
unsigned char **retbuf, size_t *retbuflen);
int apdu_send_direct (int slot, size_t extended_length,
const unsigned char *apdudata, size_t apdudatalen,
int handle_more,
unsigned char **retbuf, size_t *retbuflen);
const char *apdu_get_reader_name (int slot);
#endif /*APDU_H*/