# speedo.mk - Speedo rebuilds speedily. # Copyright (C) 2008, 2014 g10 Code GmbH # # speedo is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # speedo is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # speedo builds gnupg-related packages from GIT and installs them in a # user directory, thereby providing a non-obstrusive test environment. # speedo does only work with GNU make. The build system is similar to # that of gpg4win. The following commands are supported: # # make -f speedo.mk all pkg2rep=/dir/with/tarballs # or # make -f speedo.mk # # Builds all packages and installs them under PLAY/inst. At the end, # speedo prints commands that can be executed in the local shell to # make use of the installed packages. # # make -f speedo.mk clean # or # make -f speedo.mk clean-PACKAGE # # Removes all packages or the package PACKAGE from the installation # and build tree. A subsequent make will rebuild these (and only # these) packages. # # make -f speedo.mk report # or # make -f speedo.mk report-PACKAGE # # Lists packages and versions. # # We need to know our own name. SPEEDO_MK := $(realpath $(lastword $(MAKEFILE_LIST))) # Set this to "git" to build from git, # to "release" from tarballs, # to "this" from the unpacked sources. WHAT=git # Set target to "native" or "w32" TARGETOS=w32 # Set to the location of the directory with tarballs of # external packages. TARBALLS=$(shell pwd)/../tarballs # Number of parallel make jobs MAKE_J=3 # Name to use for the w32 installer and sources INST_NAME=gnupg-w32 # =====BEGIN LIST OF PACKAGES===== # The packages that should be built. The order is also the build order. # Fixme: Do we need to build pkg-config for cross-building? speedo_spkgs = \ libgpg-error npth libgcrypt ifeq ($(TARGETOS),w32) speedo_spkgs += \ zlib libiconv gettext endif speedo_spkgs += \ libassuan libksba gnupg ifeq ($(TARGETOS),w32) speedo_spkgs += \ libffi glib pkg-config endif speedo_spkgs += \ gpgme ifeq ($(TARGETOS),w32) speedo_spkgs += \ libpng \ gdk-pixbuf atk pixman cairo pango gtk+ endif speedo_spkgs += \ pinentry gpa ifeq ($(TARGETOS),w32) speedo_spkgs += \ gpgex endif # =====END LIST OF PACKAGES===== # Packages which are additionally build for 64 bit Windows speedo_w64_spkgs = \ libgpg-error libiconv gettext libassuan gpgex # Packages which use the gnupg autogen.sh build style speedo_gnupg_style = \ libgpg-error npth libgcrypt \ libassuan libksba gnupg gpgme \ pinentry gpa gpgex # Packages which use only make and no build directory speedo_make_only_style = \ zlib # Version numbers of the released packages # Fixme: Take the version numbers from gnupg-doc/web/swdb.mac libgpg_error_ver = 1.13 npth_ver = 0.91 libgcrypt_ver = 1.6.1 libassuan_ver = 2.1.1 libksba_ver = 1.3.0 gpgme_ver = 1.5.0 pinentry_ver = 0.8.4 gpa_ver = 0.9.5 gpgex_ver = 1.0.0 # Version number for external packages pkg_config_ver = 0.23 zlib_ver = 1.2.8 libiconv_ver = 1.14 gettext_ver = 0.18.2.1 libffi_ver = 3.0.13 glib_ver = 2.34.3 libpng_ver = 1.4.12 gdk_pixbuf_ver = 2.26.5 atk_ver = 1.32.0 pango_ver = 1.29.4 pixman_ver = 0.32.4 cairo_ver = 1.12.16 gtk__ver = 2.24.17 # The GIT repository. Using a local repo is much faster. #gitrep = git://git.gnupg.org gitrep = ${HOME}/s # The tarball directories pkgrep = ftp://ftp.gnupg.org/gcrypt pkg2rep = $(TARBALLS) # For each package, the following variables can be defined: # # speedo_pkg_PACKAGE_git: The GIT repository that should be built. # speedo_pkg_PACKAGE_gitref: The GIT revision to checkout # # speedo_pkg_PACKAGE_tar: URL to the tar file that should be built. # # Exactly one of the above variables is required. Note that this # version of speedo does not cache repositories or tar files, and does # not test the integrity of the downloaded software. If you care # about this, you can also specify filenames to locally verified files. # Filenames are differentiated from URLs by starting with a slash '/'. # # speedo_pkg_PACKAGE_configure: Extra arguments to configure. # # speedo_pkg_PACKAGE_make_args: Extra arguments to make. # # speedo_pkg_PACKAGE_make_args_inst: Extra arguments to make install. # # Note that you can override the defaults in this file in a local file # "config.mk" ifeq ($(WHAT),this) else ifeq ($(WHAT),git) speedo_pkg_libgpg_error_git = $(gitrep)/libgpg-error speedo_pkg_libgpg_error_gitref = master speedo_pkg_npth_git = $(gitrep)/npth speedo_pkg_npth_gitref = master speedo_pkg_libassuan_git = $(gitrep)/libassuan speedo_pkg_libassuan_gitref = master speedo_pkg_libgcrypt_git = $(gitrep)/libgcrypt speedo_pkg_libgcrypt_gitref = LIBGCRYPT-1-6-BRANCH speedo_pkg_libksba_git = $(gitrep)/libksba speedo_pkg_libksba_gitref = master speedo_pkg_gpgme_git = $(gitrep)/gpgme speedo_pkg_gpgme_gitref = master speedo_pkg_pinentry_git = $(gitrep)/pinentry speedo_pkg_pinentry_gitref = master speedo_pkg_gpa_git = $(gitrep)/gpa speedo_pkg_gpa_gitref = master speedo_pkg_gpgex_git = $(gitrep)/gpgex speedo_pkg_gpgex_gitref = master else ifeq ($(WHAT),release) speedo_pkg_libgpg_error_tar = \ $(pkgrep)/libgpg-error/libgpg-error-$(libgpg_error_ver).tar.bz2 speedo_pkg_npth_tar = \ $(pkgrep)/npth/npth-$(npth_ver).tar.bz2 speedo_pkg_libassuan_tar = \ $(pkgrep)/libassuan/libassuan-$(libassuan_ver).tar.bz2 speedo_pkg_libgcrypt_tar = \ $(pkgrep)/libgcrypt/libgcrypt-$(libgcrypt_ver).tar.bz2 speedo_pkg_libksba_tar = \ $(pkgrep)/libksba/libksba-$(libksba_ver).tar.bz2 speedo_pkg_gpgme_tar = \ $(pkgrep)/gpgme/gpgme-$(gpgme_ver).tar.bz2 speedo_pkg_pinentry_tar = \ $(pkgrep)/pinentry/pinentry-$(pinentry_ver).tar.bz2 speedo_pkg_gpa_tar = \ $(pkgrep)/gpa/gpa-$(gpa_ver).tar.bz2 speedo_pkg_gpgex_tar = \ $(pkgrep)/gpex/gpgex-$(gpa_ver).tar.bz2 else $(error invalid value for WHAT (use on of: git release this)) endif speedo_pkg_pkg_config_tar = $(pkg2rep)/pkg-config-$(pkg_config_ver).tar.gz speedo_pkg_zlib_tar = $(pkg2rep)/zlib-$(zlib_ver).tar.gz speedo_pkg_libiconv_tar = $(pkg2rep)/libiconv-$(libiconv_ver).tar.gz speedo_pkg_gettext_tar = $(pkg2rep)/gettext-$(gettext_ver).tar.gz speedo_pkg_libffi_tar = $(pkg2rep)/libffi-$(libffi_ver).tar.gz speedo_pkg_glib_tar = $(pkg2rep)/glib-$(glib_ver).tar.xz speedo_pkg_libpng_tar = $(pkg2rep)/libpng-$(libpng_ver).tar.bz2 speedo_pkg_gdk_pixbuf_tar = $(pkg2rep)/gdk-pixbuf-$(gdk_pixbuf_ver).tar.xz speedo_pkg_atk_tar = $(pkg2rep)/atk-$(atk_ver).tar.bz2 speedo_pkg_pango_tar = $(pkg2rep)/pango-$(pango_ver).tar.bz2 speedo_pkg_pixman_tar = $(pkg2rep)/pixman-$(pixman_ver).tar.gz speedo_pkg_cairo_tar = $(pkg2rep)/cairo-$(cairo_ver).tar.xz speedo_pkg_gtk__tar = $(pkg2rep)/gtk+-$(gtk__ver).tar.xz # # Package build options # speedo_pkg_libgpg_error_configure = --enable-static speedo_pkg_w64_libgpg_error_configure = --enable-static speedo_pkg_libassuan_configure = --enable-static speedo_pkg_w64_libassuan_configure = --enable-static speedo_pkg_libgcrypt_configure = --disable-static speedo_pkg_libksba_configure = --disable-static speedo_pkg_gnupg_configure = --enable-gpg2-is-gpg --disable-g13 speedo_pkg_gnupg_extracflags = -g define speedo_pkg_gnupg_post_install (set -e; \ sed -n 's/.*PACKAGE_VERSION "\(.*\)"/\1/p' config.h >$(idir)/INST_VERSION; \ sed -n 's/.*W32INFO_VI_PRODUCTVERSION \(.*\)/\1/p' common/w32info-rc.h \ |sed 's/,/./g' >$(idir)/INST_PROD_VERSION ) endef # The LDFLAGS is needed for -lintl for glib. speedo_pkg_gpgme_configure = \ --enable-static --enable-w32-glib --disable-w32-qt \ --with-gpg-error-prefix=$(idir) \ LDFLAGS=-L$(idir)/lib speedo_pkg_pinentry_configure = \ --disable-pinentry-qt --disable-pinentry-qt4 --disable-pinentry-gtk \ --enable-pinentry-gtk2 \ --with-glib-prefix=$(idir) --with-gtk-prefix=$(idir) \ CPPFLAGS=-I$(idir)/include \ LDFLAGS=-L$(idir)/lib \ CXXFLAGS=-static-libstdc++ speedo_pkg_gpa_configure = \ --with-libiconv-prefix=$(idir) --with-libintl-prefix=$(idir) \ --with-gpgme-prefix=$(idir) --with-zlib=$(idir) \ --with-libassuan-prefix=$(idir) --with-gpg-error-prefix=$(idir) speedo_pkg_gpgex_configure = \ --with-gpg-error-prefix=$(idir) \ --with-libassuan-prefix=$(idir) speedo_pkg_w64_gpgex_configure = \ --with-gpg-error-prefix=$(idir6) \ --with-libassuan-prefix=$(idir6) # # External packages # speedo_pkg_zlib_make_args = \ -fwin32/Makefile.gcc PREFIX=$(host)- IMPLIB=libz.dll.a speedo_pkg_zlib_make_args_inst = \ -fwin32/Makefile.gcc \ BINARY_PATH=$(idir)/bin INCLUDE_PATH=$(idir)/include \ LIBRARY_PATH=$(idir)/lib SHARED_MODE=1 IMPLIB=libz.dll.a # Zlib needs some special magic to generate a libtool file. # We also install the pc file here. define speedo_pkg_zlib_post_install (set -e; mkdir $(idir)/lib/pkgconfig || true; \ cp $(auxsrc)/zlib.pc $(idir)/lib/pkgconfig/; \ cd $(idir); \ echo "# Generated by libtool" > lib/libz.la \ echo "dlname='../bin/zlib1.dll'" >> lib/libz.la; \ echo "library_names='libz.dll.a'" >> lib/libz.la; \ echo "old_library='libz.a'" >> lib/libz.la; \ echo "dependency_libs=''" >> lib/libz.la; \ echo "current=1" >> lib/libz.la; \ echo "age=2" >> lib/libz.la; \ echo "revision=5" >> lib/libz.la; \ echo "installed=yes" >> lib/libz.la; \ echo "shouldnotlink=no" >> lib/libz.la; \ echo "dlopen=''" >> lib/libz.la; \ echo "dlpreopen=''" >> lib/libz.la; \ echo "libdir=\"$(idir)/lib\"" >> lib/libz.la) endef speedo_pkg_w64_libiconv_configure = \ --enable-shared=no --enable-static=yes speedo_pkg_gettext_configure = \ --with-lib-prefix=$(idir) --with-libiconv-prefix=$(idir) \ CPPFLAGS=-I$(idir)/include LDFLAGS=-L$(idir)/lib speedo_pkg_w64_gettext_configure = \ --with-lib-prefix=$(idir) --with-libiconv-prefix=$(idir) \ CPPFLAGS=-I$(idir6)/include LDFLAGS=-L$(idir6)/lib speedo_pkg_gettext_extracflags = -O2 # We only need gettext-runtime and there is sadly no top level # configure option for this speedo_pkg_gettext_make_dir = gettext-runtime speedo_pkg_glib_configure = \ --disable-modular-tests \ --with-lib-prefix=$(idir) --with-libiconv-prefix=$(idir) \ CPPFLAGS=-I$(idir)/include \ LDFLAGS=-L$(idir)/lib \ CCC=$(host)-g++ \ LIBFFI_CFLAGS=-I$(idir)/lib/libffi-$(libffi_ver)/include \ LIBFFI_LIBS=\"-L$(idir)/lib -lffi\" speedo_pkg_glib_extracflags = -march=i486 speedo_pkg_libpng_configure = \ CPPFLAGS=\"-I$(idir)/include -DPNG_BUILD_DLL\" \ LDFLAGS=\"-L$(idir)/lib\" LIBPNG_DEFINES=\"-DPNG_BUILD_DLL\" speedo_pkg_pixman_configure = \ CPPFLAGS=-I$(idir)/include \ LDFLAGS=-L$(idir)/lib speedo_pkg_cairo_configure = \ --disable-qt --disable-ft --disable-fc \ --enable-win32 --enable-win32-font \ CPPFLAGS=-I$(idir)/include \ LDFLAGS=-L$(idir)/lib speedo_pkg_pango_configure = \ --disable-gtk-doc \ CPPFLAGS=-I$(idir)/include \ LDFLAGS=-L$(idir)/lib speedo_pkg_gtk__configure = \ --disable-cups \ CPPFLAGS=-I$(idir)/include \ LDFLAGS=-L$(idir)/lib # --------- all: all-speedo report: report-speedo clean: clean-speedo ifeq ($(TARGETOS),w32) STRIP = i686-w64-mingw32-strip else STRIP = strip endif W32CC = i686-w64-mingw32-gcc -include config.mk # # The generic speedo code # MKDIR=mkdir MAKENSIS=makensis BUILD_ISODATE=$(shell date -u +%Y-%m-%d) # These paths must be absolute, as we switch directories pretty often. root := $(shell pwd)/PLAY sdir := $(root)/src bdir := $(root)/build bdir6:= $(root)/build-w64 idir := $(root)/inst idir6:= $(root)/inst-w64 stampdir := $(root)/stamps topsrc := $(shell cd $(dir $(SPEEDO_MK)).. && pwd) auxsrc := $(topsrc)/build-aux/speedo patdir := $(topsrc)/build-aux/speedo/patches w32src := $(topsrc)/build-aux/speedo/w32 # The next two macros will work only after gnupg has been build. INST_VERSION=$(shell head -1 $(idir)/INST_VERSION) INST_PROD_VERSION=$(shell head -1 $(idir)/INST_PROD_VERSION) # List with packages speedo_build_list = $(speedo_spkgs) speedo_w64_build_list = $(speedo_w64_spkgs) # Determine build and host system build := $(shell $(topsrc)/autogen.sh --silent --print-build) ifeq ($(TARGETOS),w32) speedo_autogen_buildopt := --build-w32 speedo_autogen_buildopt6 := --build-w64 host := $(shell $(topsrc)/autogen.sh --silent --print-host --build-w32) host6:= $(shell $(topsrc)/autogen.sh --silent --print-host --build-w64) speedo_host_build_option := --host=$(host) --build=$(build) speedo_host_build_option6 := --host=$(host6) --build=$(build) speedo_w32_cflags := -mms-bitfields else speedo_autogen_buildopt := host := speedo_host_build_option := speedo_w32_cflags := endif ifeq ($(MAKE_J),) speedo_makeopt= else speedo_makeopt=-j$(MAKE_J) endif # The playground area is our scratch area, where we unpack, build and # install the packages. $(stampdir)/stamp-directories: $(MKDIR) $(root) || true $(MKDIR) $(stampdir) || true $(MKDIR) $(sdir) || true $(MKDIR) $(bdir) || true $(MKDIR) $(idir) || true ifeq ($(TARGETOS),w32) $(MKDIR) $(bdir6) || true $(MKDIR) $(idir6) || true endif touch $(stampdir)/stamp-directories # Frob the name $1 by converting all '-' and '+' characters to '_'. define FROB_macro $(subst +,_,$(subst -,_,$(1))) endef # Get the variable $(1) (which may contain '-' and '+' characters). define GETVAR $($(call FROB_macro,$(1))) endef # Set a couple of common variables. define SETVARS pkg="$(1)"; \ git="$(call GETVAR,speedo_pkg_$(1)_git)"; \ gitref="$(call GETVAR,speedo_pkg_$(1)_gitref)"; \ tar="$(call GETVAR,speedo_pkg_$(1)_tar)"; \ pkgsdir="$(sdir)/$(1)"; \ if [ "$(1)" = "gnupg" ]; then \ git=''; \ gitref=''; \ tar=''; \ pkgsdir="$(topsrc)"; \ fi; \ pkgbdir="$(bdir)/$(1)"; \ pkgcfg="$(call GETVAR,speedo_pkg_$(1)_configure)"; \ pkgextracflags="$(call GETVAR,speedo_pkg_$(1)_extracflags)"; \ pkgmkdir="$(call GETVAR,speedo_pkg_$(1)_make_dir)"; \ pkgmkargs="$(call GETVAR,speedo_pkg_$(1)_make_args)"; \ pkgmkargs_inst="$(call GETVAR,speedo_pkg_$(1)_make_args_inst)"; \ export PKG_CONFIG="/usr/bin/pkg-config"; \ export PKG_CONFIG_PATH="$(idir)/lib/pkgconfig"; \ export PKG_CONFIG_LIBDIR=""; \ export SYSROOT="$(idir)"; \ export PATH="$(idir)/bin:$${PATH}"; \ export LD_LIBRARY_PATH="$(idir)/lib:$${LD_LIBRARY_PATH}" endef define SETVARS_W64 pkg="$(1)"; \ git="$(call GETVAR,speedo_pkg_$(1)_git)"; \ gitref="$(call GETVAR,speedo_pkg_$(1)_gitref)"; \ tar="$(call GETVAR,speedo_pkg_$(1)_tar)"; \ pkgsdir="$(sdir)/$(1)"; \ if [ "$(1)" = "gnupg" ]; then \ git=''; \ gitref=''; \ tar=''; \ pkgsdir="$(topsrc)"; \ fi; \ pkgbdir="$(bdir6)/$(1)"; \ pkgcfg="$(call GETVAR,speedo_pkg_w64_$(1)_configure)"; \ pkgextracflags="$(call GETVAR,speedo_pkg_$(1)_extracflags)"; \ pkgmkdir="$(call GETVAR,speedo_pkg_$(1)_make_dir)"; \ pkgmkargs="$(call GETVAR,speedo_pkg_$(1)_make_args)"; \ pkgmkargs_inst="$(call GETVAR,speedo_pkg_$(1)_make_args_inst)"; \ export PKG_CONFIG="/usr/bin/pkg-config"; \ export PKG_CONFIG_PATH="$(idir6)/lib/pkgconfig"; \ export PKG_CONFIG_LIBDIR=""; \ export SYSROOT="$(idir6)"; \ export PATH="$(idir6)/bin:$${PATH}"; \ export LD_LIBRARY_PATH="$(idir6)/lib:$${LD_LIBRARY_PATH}" endef # Template for source packages. # # Note that the gnupg package is special: The package source dir is # the same as the topsrc dir and thus we need to detect the gnupg # package and cd to that directory. We also test that no in-source build # has been done. autogen.sh is not run for gnupg. # define SPKG_template $(stampdir)/stamp-$(1)-00-unpack: $(stampdir)/stamp-directories @echo "speedo: /*" @echo "speedo: * $(1)" @echo "speedo: */" @(set -e; cd $(sdir); \ $(call SETVARS,$(1)); \ if [ "$(WHAT)" = "this" ]; then \ echo "speedo: using included source"; \ elif [ "$(1)" = "gnupg" ]; then \ cd $$$${pkgsdir}; \ if [ -f config.log ]; then \ echo "GnuPG has already been build in-source" >&2 ;\ echo "Please run \"make distclean\" and retry" >&2 ;\ exit 1 ; \ fi; \ echo "speedo: unpacking gnupg not needed"; \ elif [ -n "$$$${git}" ]; then \ echo "speedo: unpacking $(1) from $$$${git}:$$$${gitref}"; \ git clone -b "$$$${gitref}" "$$$${git}" "$$$${pkg}"; \ cd "$$$${pkg}"; \ AUTOGEN_SH_SILENT=1 ./autogen.sh; \ elif [ -n "$$$${tar}" ]; then \ echo "speedo: unpacking $(1) from $$$${tar}"; \ case "$$$${tar}" in \ *.gz) opt=z ;; \ *.bz2) opt=j ;; \ *.xz) opt=J ;; \ *) opt= ;; \ esac; \ case "$$$${tar}" in \ /*) cmd=cat ;; \ *) cmd="wget -q -O -" ;; \ esac; \ $$$${cmd} "$$$${tar}" | tar x$$$${opt}f - ; \ base=`echo "$$$${tar}" | sed -e 's,^.*/,,' \ | sed -e 's,\.tar.*$$$$,,'`; \ mv $$$${base} $(1); \ patch="$(patdir)/$(1)-$$$${base#$(1)-}.patch";\ if [ -x "$$$${patch}" ]; then \ echo "speedo: applying patch $$$${patch}"; \ cd $(1); "$$$${patch}"; \ elif [ -f "$$$${patch}" ]; then \ echo "speedo: warning: $$$${patch} is not executable"; \ fi; \ else \ echo "speedo: unpacking $(1) from UNKNOWN"; \ fi) @touch $(stampdir)/stamp-$(1)-00-unpack $(stampdir)/stamp-$(1)-01-configure: $(stampdir)/stamp-$(1)-00-unpack @echo "speedo: configuring $(1)" ifneq ($(findstring $(1),$(speedo_make_only_style)),) @echo "speedo: configure run not required" else ifneq ($(findstring $(1),$(speedo_gnupg_style)),) @($(call SETVARS,$(1)); \ mkdir "$$$${pkgbdir}"; \ cd "$$$${pkgbdir}"; \ if [ -n "$(speedo_autogen_buildopt)" ]; then \ eval AUTOGEN_SH_SILENT=1 w32root="$(idir)" \ "$$$${pkgsdir}/autogen.sh" \ $(speedo_autogen_buildopt) \ $$$${pkgcfg} \ CFLAGS=\"$(speedo_w32_cflags) $$$${pkgextracflags}\";\ else \ eval "$$$${pkgsdir}/configure" \ --silent \ --enable-maintainer-mode \ --prefix="$(idir)" \ $$$${pkgcfg} \ CFLAGS=\"$(speedo_w32_cflags) $$$${pkgextracflags}\";\ fi) else @($(call SETVARS,$(1)); \ mkdir "$$$${pkgbdir}"; \ cd "$$$${pkgbdir}"; \ eval "$$$${pkgsdir}/configure" \ --silent $(speedo_host_build_option) \ --prefix="$(idir)" \ $$$${pkgcfg} \ CFLAGS=\"$(speedo_w32_cflags) $$$${pkgextracflags}\";\ ) endif @touch $(stampdir)/stamp-$(1)-01-configure # Note that unpack has no 64 bit version becuase it is just the source. # Fixme: We should use templates to create the standard and w64 # version of these rules. $(stampdir)/stamp-w64-$(1)-01-configure: $(stampdir)/stamp-$(1)-00-unpack @echo "speedo: configuring $(1) (64 bit)" ifneq ($(findstring $(1),$(speedo_make_only_style)),) @echo "speedo: configure run not required" else ifneq ($(findstring $(1),$(speedo_gnupg_style)),) @($(call SETVARS_W64,$(1)); \ mkdir "$$$${pkgbdir}"; \ cd "$$$${pkgbdir}"; \ if [ -n "$(speedo_autogen_buildopt)" ]; then \ eval AUTOGEN_SH_SILENT=1 w64root="$(idir6)" \ "$$$${pkgsdir}/autogen.sh" \ $(speedo_autogen_buildopt6) \ $$$${pkgcfg} \ CFLAGS=\"$(speedo_w32_cflags) $$$${pkgextracflags}\";\ else \ eval "$$$${pkgsdir}/configure" \ --silent \ --enable-maintainer-mode \ --prefix="$(idir6)" \ $$$${pkgcfg} \ CFLAGS=\"$(speedo_w32_cflags) $$$${pkgextracflags}\";\ fi) else @($(call SETVARS_W64,$(1)); \ mkdir "$$$${pkgbdir}"; \ cd "$$$${pkgbdir}"; \ eval "$$$${pkgsdir}/configure" \ --silent $(speedo_host_build_option6) \ --prefix="$(idir6)" \ $$$${pkgcfg} \ CFLAGS=\"$(speedo_w32_cflags) $$$${pkgextracflags}\";\ ) endif @touch $(stampdir)/stamp-w64-$(1)-01-configure $(stampdir)/stamp-$(1)-02-make: $(stampdir)/stamp-$(1)-01-configure @echo "speedo: making $(1)" ifneq ($(findstring $(1),$(speedo_make_only_style)),) @($(call SETVARS,$(1)); \ cd "$$$${pkgsdir}"; \ test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \ $(MAKE) --no-print-directory $(speedo_makeopt) $$$${pkgmkargs} V=0) else @($(call SETVARS,$(1)); \ cd "$$$${pkgbdir}"; \ test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \ $(MAKE) --no-print-directory $(speedo_makeopt) $$$${pkgmkargs} V=1) endif @touch $(stampdir)/stamp-$(1)-02-make $(stampdir)/stamp-w64-$(1)-02-make: $(stampdir)/stamp-w64-$(1)-01-configure @echo "speedo: making $(1) (64 bit)" ifneq ($(findstring $(1),$(speedo_make_only_style)),) @($(call SETVARS_W64,$(1)); \ cd "$$$${pkgsdir}"; \ test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \ $(MAKE) --no-print-directory $(speedo_makeopt) $$$${pkgmkargs} V=0) else @($(call SETVARS_W64,$(1)); \ cd "$$$${pkgbdir}"; \ test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \ $(MAKE) --no-print-directory $(speedo_makeopt) $$$${pkgmkargs} V=1) endif @touch $(stampdir)/stamp-w64-$(1)-02-make # Note that post_install must come last because it may be empty and # "; ;" is a syntax error. $(stampdir)/stamp-$(1)-03-install: $(stampdir)/stamp-$(1)-02-make @echo "speedo: installing $(1)" ifneq ($(findstring $(1),$(speedo_make_only_style)),) @($(call SETVARS,$(1)); \ cd "$$$${pkgsdir}"; \ test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \ $(MAKE) --no-print-directory $$$${pkgmkargs_inst} install V=1;\ $(call speedo_pkg_$(call FROB_macro,$(1))_post_install)) else @($(call SETVARS,$(1)); \ cd "$$$${pkgbdir}"; \ test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \ $(MAKE) --no-print-directory $$$${pkgmkargs_inst} install-strip V=0;\ $(call speedo_pkg_$(call FROB_macro,$(1))_post_install)) endif touch $(stampdir)/stamp-$(1)-03-install $(stampdir)/stamp-w64-$(1)-03-install: $(stampdir)/stamp-w64-$(1)-02-make @echo "speedo: installing $(1) (64 bit)" ifneq ($(findstring $(1),$(speedo_make_only_style)),) @($(call SETVARS_W64,$(1)); \ cd "$$$${pkgsdir}"; \ test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \ $(MAKE) --no-print-directory $$$${pkgmkargs_inst} install V=1;\ $(call speedo_pkg_$(call FROB_macro,$(1))_post_install)) else @($(call SETVARS_W64,$(1)); \ cd "$$$${pkgbdir}"; \ test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \ $(MAKE) --no-print-directory $$$${pkgmkargs_inst} install-strip V=0;\ $(call speedo_pkg_$(call FROB_macro,$(1))_post_install)) endif touch $(stampdir)/stamp-w64-$(1)-03-install $(stampdir)/stamp-final-$(1): $(stampdir)/stamp-$(1)-03-install @echo "speedo: $(1) done" @touch $(stampdir)/stamp-final-$(1) $(stampdir)/stamp-w64-final-$(1): $(stampdir)/stamp-w64-$(1)-03-install @echo "speedo: $(1) (64 bit) done" @touch $(stampdir)/stamp-w64-final-$(1) .PHONY : clean-$(1) clean-$(1): @echo "speedo: uninstalling $(1)" @($(call SETVARS,$(1)); \ (cd "$$$${pkgbdir}" 2>/dev/null && \ $(MAKE) --no-print-directory \ $$$${pkgmkargs_inst} uninstall V=0 ) || true ;\ if [ "$(1)" = "gnupg" ]; then \ rm -fR "$$$${pkgbdir}" || true ;\ else \ rm -fR "$$$${pkgsdir}" "$$$${pkgbdir}" || true;\ fi) -rm -f $(stampdir)/stamp-final-$(1) $(stampdir)/stamp-$(1)-* .PHONY : build-$(1) build-$(1): $(stampdir)/stamp-final-$(1) .PHONY : report-$(1) report-$(1): @($(call SETVARS,$(1)); \ echo -n $(1):\ ; \ if [ -n "$$$${git}" ]; then \ if [ -e "$$$${pkgsdir}/.git" ]; then \ cd "$$$${pkgsdir}" && \ git describe ; \ else \ echo missing; \ fi \ elif [ -n "$$$${tar}" ]; then \ base=`echo "$$$${tar}" | sed -e 's,^.*/,,' \ | sed -e 's,\.tar.*$$$$,,'`; \ echo $$$${base} ; \ fi) endef # Insert the template for each source package. $(foreach spkg, $(speedo_spkgs), $(eval $(call SPKG_template,$(spkg)))) $(stampdir)/stamp-final: $(stampdir)/stamp-directories ifeq ($(TARGETOS),w32) $(stampdir)/stamp-final: $(addprefix $(stampdir)/stamp-w64-final-,$(speedo_w64_build_list)) endif $(stampdir)/stamp-final: $(addprefix $(stampdir)/stamp-final-,$(speedo_build_list)) touch $(stampdir)/stamp-final all-speedo: $(stampdir)/stamp-final report-speedo: $(addprefix report-,$(speedo_build_list)) # Just to check if we catched all stamps. clean-stamps: $(RM) -fR $(stampdir) clean-speedo: $(RM) -fR PLAY # # Windows installer # dist-source: all for i in 00 01 02 03; do sleep 1;touch PLAY/stamps/stamp-*-${i}-*;done (set -e;\ tarname="$(INST_NAME)-$(INST_VERSION)_$(BUILD_ISODATE).tar" ;\ [ -f "$$tarname" ] && rm "$$tarname" ;\ tar -C $(topsrc) -cf "$$tarname" --exclude-backups --exclude-vc \ --transform='s,^\./,$(INST_NAME)-$(INST_VERSION)/,' \ --anchored --exclude './PLAY' . ;\ tar --totals -rf "$$tarname" --exclude-backups --exclude-vc \ --transform='s,^,$(INST_NAME)-$(INST_VERSION)/,' \ PLAY/stamps/stamp-*-00-unpack PLAY/src ;\ xz "$$tarname" ;\ ) $(bdir)/NEWS.tmp: $(topsrc)/NEWS sed -e '/^#/d' <$(topsrc)/NEWS >$(bdir)/NEWS.tmp $(bdir)/README.txt: $(bdir)/NEWS.tmp $(w32src)/README.txt \ $(w32src)/pkg-copyright.txt sed -e '/^;.*/d;' \ -e '/!NEWSFILE!/{r NEWS.tmp' -e 'd;}' \ -e '/!PKG-COPYRIGHT!/{r $(w32src)/pkg-copyright.txt' -e 'd;}' \ -e 's,!VERSION!,$(INST_VERSION),g' \ < $(w32src)/README.txt \ | awk '{printf "%s\r\n", $$0}' >$(bdir)/README.txt $(bdir)/g4wihelp.dll: $(w32src)/g4wihelp.c $(w32src)/exdll.h (set -e; cd $(bdir); \ $(W32CC) -I. -shared -O2 -o g4wihelp.dll $(w32src)/g4wihelp.c \ -lwinmm -lgdi32; \ $(STRIP) g4wihelp.dll) w32_insthelpers: $(bdir)/g4wihelp.dll $(bdir)/inst-options.ini: $(w32src)/inst-options.ini cat $(w32src)/inst-options.ini >$(bdir)/inst-options.ini installer: all w32_insthelpers $(bdir)/inst-options.ini $(bdir)/README.txt $(MAKENSIS) -V2 \ -DINST_DIR=$(idir) \ -DINST6_DIR=$(idir6) \ -DBUILD_DIR=$(bdir) \ -DTOP_SRCDIR=$(topsrc) \ -DW32_SRCDIR=$(w32src) \ -DBUILD_ISODATE=$(BUILD_ISODATE) \ -DNAME=$(INST_NAME) \ -DVERSION=$(INST_VERSION) \ -DPROD_VERSION=$(INST_PROD_VERSION) \ $(w32src)/inst.nsi @echo "Ready: $(idir)/$(INST_NAME)-$(INST_VERSION)" # # Mark phony targets # .PHONY: all-speedo report-speedo clean-stamps clean-speedo installer \ w32_insthelpers