directory"> file"> &ParmFile;"> files"> &ParmFiles;"> names"> &ParmNames;"> name"> &ParmName;"> key IDs"> n"> flags"> string"> value"> name=value"> ]> gpg 1 GNU Tools encryption and signing tool gpg --homedir --options command DESCRIPTION This man page only lists the commands and options available. For a more verbose documentation get the GNU Privacy Handbook (GPH), which is available at http://www.gnupg.org/gph/ . You will find a list of HOWTO documents at http://www.gnupg.org/docs.html . COMMANDS -s, --sign Make a signature. This command may be combined with --encrypt. --clearsign Make a clear text signature. -b, --detach-sign Make a detached signature. -e, --encrypt Encrypt data. This option may be combined with --sign. -c, --symmetric Encrypt with symmetric cipher only. This command asks for a passphrase. --store Store only (make a simple RFC1991 packet). --decrypt &OptParmFile; Decrypt &ParmFile; (or stdin if no file is specified) and write it to stdout (or the file specified with --output). If the decrypted file is signed, the signature is also verified. This command differs from the default operation, as it never writes to the filename which is included in the file and it rejects files which don't begin with an encrypted message. --verify Assume that - as the second filename. For security reasons a detached signature cannot read the signed material from stdin without denoting it in the above way. --verify-files This is a special version of the --verify command which does not work with detached signatures. The command expects the files to be verified either on the command line or reads the filenames from stdin; each name must be on separate line. The command is intended for quick checking of many files. --list-keys &OptParmNames; --list-public-keys &OptParmNames; List all keys from the public keyrings, or just the ones given on the command line. --list-secret-keys &OptParmNames; List all keys from the secret keyrings, or just the ones given on the command line. --list-sigs &OptParmNames; Same as --list-keys, but the signatures are listed too. --check-sigs &OptParmNames; Same as --list-sigs, but the signatures are verified. --fingerprint &OptParmNames; List all keys with their fingerprints. This is the same output as --list-keys but with the additional output of a line with the fingerprint. May also be combined with --list-sigs or --check-sigs. If this command is given twice, the fingerprints of all secondary keys are listed too. --list-packets List only the sequence of packets. This is mainly useful for debugging. --gen-key Generate a new key pair. This command is normally only used interactively. There is an experimental feature which allows you to create keys in batch mode. See the file doc/DETAILS in the source distribution on how to use this. --edit-key &ParmName; Present a menu which enables you to do all key related tasks: sign Make a signature on key of user &ParmName; If the key is not yet signed by the default user (or the users given with -u), the program displays the information of the key again, together with its fingerprint and asks whether it should be signed. This question is repeated for all users specified with -u. lsign Same as --sign but the signature is marked as non-exportable and will therefore never be used by others. This may be used to make keys valid only in the local environment. revsig Revoke a signature. GnuPG asks for every signature which has been done by one of the secret keys, whether a revocation certificate should be generated. trust Change the owner trust value. This updates the trust-db immediately and no save is required. disable enable Disable or enable an entire key. A disabled key can normally not be used for encryption. adduid Create an alternate user id. deluid Delete a user id. addkey Add a subkey to this key. delkey Remove a subkey. revkey Revoke a subkey. expire Change the key expiration time. If a key is selected, the time of this key will be changed. With no selection the key expiration of the primary key is changed. passwd Change the passphrase of the secret key. primary Flag the current user id as the primary one, removes the primary user id flag from all other user ids and sets the timestamp of all affected self-signatures one second ahead. uid &ParmN; Toggle selection of user id with index &ParmN;. Use 0 to deselect all. key &ParmN; Toggle selection of subkey with index &ParmN;. Use 0 to deselect all. check Check all selected user ids. pref List preferences. showpref More verbose preferences listing. setpref &ParmString; Set the list of user ID preferences to &ParmString;, this should be a string similar to the one printed by "pref". Using an empty string will set the default preference string, using "none" will set the preferences to nil. Only available algorithms are allowed. This command just initializes an internal list and does not change anything unless another command which changes the self-signatures is used. updpref Change the preferences of all user IDs (or just of the selected ones to the current list of preferences. The timestamp of all affected self-signatures fill be advanced by one second. toggle Toggle between public and secret key listing. save Save all changes to the key rings and quit. quit Quit the program without updating the key rings. The listing shows you the key with its secondary keys and all user ids. Selected keys or user ids are indicated by an asterisk. The trust value is displayed with the primary key: the first is the assigned owner trust and the second is the calculated trust value. Letters are used for the values: -No ownertrust assigned / not yet calculated. eTrust calculation has failed; probably due to an expired key. qNot enough information for calculation. nNever trust this key. mMarginally trusted. fFully trusted. uUltimately trusted. --sign-key &ParmName; Sign a public key with your secret key. This is a shortcut version of the subcommand "sign" from --edit. --lsign-key &ParmName; Sign a public key with your secret key but mark it as non-exportable. This is a shortcut version of the subcommand "lsign" from --edit. --trusted-key long key ID Assume that the specified key (which must be given as a full 8 byte key ID) is as trustworthy as one of your own secret keys. This option is useful if you don't want to keep your secret keys (or one of them) online but still want to be able to check the validity of a given recipient's or signator's key. --delete-key &ParmName; Remove key from the public keyring --delete-secret-key &ParmName; Remove key from the secret and public keyring --delete-secret-and-public-key &ParmName; Same as --delete-key, but if a secret key exists, it will be removed first. --gen-revoke Generate a revocation certificate for the complete key. To revoke a subkey or a signature, use the --edit command. --export &OptParmNames; Either export all keys from all keyrings (default keyrings and those registered via option --keyring), or if at least one name is given, those of the given name. The new keyring is written to stdout or to the file given with option "output". Use together with --armor to mail those keys. --send-keys &OptParmNames; Same as --export but sends the keys to a keyserver. Option --keyserver must be used to give the name of this keyserver. Don't send your complete keyring to a keyserver - select only those keys which are new or changed by you. --export-all &OptParmNames; Same as --export, but also exports keys which are not compatible with OpenPGP. --export-secret-keys &OptParmNames; --export-secret-subkeys &OptParmNames; Same as --export, but exports the secret keys instead. This is normally not very useful and a security risk. The second form of the command has the special property to render the secret part of the primary key useless; this is a GNU extension to OpenPGP and other implementations can not be expected to successfully import such a key. --import &OptParmFiles; --fast-import &OptParmFiles; Import/merge keys. This adds the given keys to the keyring. The fast version does not build the trustdb; this can be done at any time with the command --update-trustdb. There are a few other options which control how this command works. Most notable here is the --merge-only option which does not insert new keys but does only the merging of new signatures, user-IDs and subkeys. See also the option --allow-secret-key-import. --recv-keys &ParmKeyIDs; Import the keys with the given key IDs from a HKP keyserver. Option --keyserver must be used to give the name of this keyserver. --export-ownertrust List the assigned ownertrust values in ASCII format for backup purposes. --import-ownertrust &OptParmFiles; Update the trustdb with the ownertrust values stored in &ParmFiles; (or stdin if not given); existing values will be overwritten. --print-md algo &OptParmFiles; --print-mds &OptParmFiles; Print message digest of algorithm ALGO for all given files or stdin. With the second form (or a deprecated "*" as algo) digests for all available algorithms are printed. --gen-random 0|1|2 count Emit COUNT random bytes of the given quality level. If count is not given or zero, an endless sequence of random bytes will be emitted. PLEASE, don't use this command unless you know what you are doing; it may remove precious entropy from the system! --gen-prime mode bits qbits Use the source, Luke :-). The output format is still subject to change. --version Print version information along with a list of supported algorithms. --warranty Print warranty information. -h, --help Print usage information. This is a really long list even though it doesn't list all options. OPTIONS Long options can be put in an options file (default "~/.gnupg/options"). Do not write the 2 dashes, but simply the name of the option and any required arguments. Lines with a hash as the first non-white-space character are ignored. Commands may be put in this file too, but that does not make sense. -a, --armor Create ASCII armored output. -o, --output &ParmFile; Write output to &ParmFile;. -u, --local-user &ParmName; Use &ParmName as the user ID to sign. This option is silently ignored for the list commands, so that it can be used in an options file. --default-key &ParmName; Use &ParmName; as default user ID for signatures. If this is not used the default user ID is the first user ID found in the secret keyring. -r, --recipient &ParmName; Encrypt for user id &ParmName;. If this option is not specified, GnuPG asks for the user-id unless --default-recipient is given --default-recipient &ParmName; Use &ParmName; as default recipient if option --recipient is not used and don't ask if this is a valid one. &ParmName; must be non-empty. --default-recipient-self Use the default key as default recipient if option --recipient is not used and don't ask if this is a valid one. The default key is the first one from the secret keyring or the one set with --default-key. --no-default-recipient Reset --default-recipient and --default-recipient-self. --encrypt-to &ParmName; Same as --recipient but this one is intended for use in the options file and may be used with your own user-id as an "encrypt-to-self". These keys are only used when there are other recipients given either by use of --recipient or by the asked user id. No trust checking is performed for these user ids and even disabled keys can be used. --no-encrypt-to Disable the use of all --encrypt-to keys. -v, --verbose Give more information during processing. If used twice, the input data is listed in detail. -q, --quiet Try to be as quiet as possible. -z &ParmN; Set compression level to &ParmN;. A value of 0 for &ParmN; disables compression. Default is to use the default compression level of zlib (normally 6). -t, --textmode Use canonical text mode. If -t (but not --textmode) is used together with armoring and signing, this enables clearsigned messages. This kludge is needed for PGP compatibility; normally you would use --sign or --clearsign to selected the type of the signature. -n, --dry-run Don't make any changes (this is not completely implemented). -i, --interactive Prompt before overwriting any files. --batch Use batch mode. Never ask, do not allow interactive commands. --no-tty Make sure that the TTY (terminal) is never used for any output. This option is needed in some cases because GnuPG sometimes prints warnings to the TTY if --batch is used. --no-batch Disable batch mode. This may be of use if --batch is enabled from an options file. --yes Assume "yes" on most questions. --no Assume "no" on most questions. --always-trust Skip key validation and assume that used keys are always fully trusted. You won't use this unless you have installed some external validation scheme. --keyserver &ParmName; Use &ParmName to lookup keys which are not yet in your keyring. This is only done while verifying messages with signatures. The option is also required for the command --send-keys to specify the keyserver to where the keys should be send. All keyservers synchronize with each other - so there is no need to send keys to more than one server. Using the command "host -l pgp.net | grep wwwkeys" gives you a list of keyservers. Because there is load balancing using round-robin DNS you may notice that you get different key servers. --no-auto-key-retrieve This option disables the automatic retrieving of keys from a keyserver while verifying signatures. This option allows you to keep a keyserver in the options file for the --send-keys and --recv-keys commands. --honor-http-proxy Try to access the keyserver over the proxy set with the variable "http_proxy". --keyring &ParmFile; Add &ParmFile to the list of keyrings. If &ParmFile begins with a tilde and a slash, these are replaced by the HOME directory. If the filename does not contain a slash, it is assumed to be in the home-directory ("~/.gnupg" if --homedir is not used). The filename may be prefixed with a scheme: "gnupg-ring:" is the default one. "gnupg-gdbm:" may be used for a GDBM ring. Note that GDBM is experimental and likely to be removed in future versions. It might make sense to use it together with --no-default-keyring. --secret-keyring &ParmFile; Same as --keyring but for the secret keyrings. --homedir &ParmDir; Set the name of the home directory to &ParmDir; If this option is not used it defaults to "~/.gnupg". It does not make sense to use this in a options file. This also overrides the environment variable "GNUPGHOME". --charset &ParmName; Set the name of the native character set. This is used to convert some strings to proper UTF-8 encoding. Valid values for &ParmName; are: iso-8859-1This is the default Latin 1 set. iso-8859-2The Latin 2 set. koi8-rThe usual Russian set (rfc1489). utf-8Bypass all translations and assume that the OS uses native UTF-8 encoding. --utf8-strings --no-utf8-strings Assume that the arguments are already given as UTF8 strings. The default (--no-utf8-strings) is to assume that arguments are encoded in the character set as specified by --charset. These options affect all following arguments. Both options may be used multiple times. --options &ParmFile; Read options from &ParmFile; and do not try to read them from the default options file in the homedir (see --homedir). This option is ignored if used in an options file. --no-options Shortcut for "--options /dev/null". This option is detected before an attempt to open an option file. Using this option will also prevent the creation of a "~./gnupg" homedir. --load-extension &ParmName; Load an extension module. If &ParmName; does not contain a slash it is searched in "/usr/local/lib/gnupg" See the manual for more information about extensions. --debug &ParmFlags; Set debugging flags. All flags are or-ed and &ParmFlags; may be given in C syntax (e.g. 0x0042). --debug-all Set all useful debugging flags. --status-fd &ParmN; Write special status strings to the file descriptor &ParmN;. See the file DETAILS in the documentation for a listing of them. --logger-fd &ParmN; Write log output to file descriptor &ParmN; and not to stderr. --no-comment Do not write comment packets. This option affects only the generation of secret keys. Please note, that this has nothing to do with the comments in clear text signatures. --comment &ParmString; Use &ParmString; as comment string in clear text signatures. The default is not do write a comment string. --default-comment Force to write the standard comment string in clear text signatures. Use this to overwrite a --comment from a config file. This option is now obsolete because there is no default comment string anymore. --no-version Omit the version string in clear text signatures. --emit-version Force to write the version string in clear text signatures. Use this to overwrite a previous --no-version from a config file. -N, --notation-data &ParmNameValue; Put the name value pair into the signature as notation data. &ParmName; must consist only of alphanumeric characters, digits or the underscore; the first character must not be a digit. &ParmValue; may be any printable string; it will be encoded in UTF8, so you should check that your --charset is set correctly. If you prefix &ParmName; with an exclamation mark, the notation data will be flagged as critical (rfc2440:5.2.3.15). --set-policy-url &ParmString; Use &ParmString; as Policy URL for signatures (rfc2440:5.2.3.19). If you prefix it with an exclamation mark, the policy URL packet will be flagged as critical. --set-filename &ParmString; Use &ParmString; as the name of file which is stored in messages. --use-embedded-filename Try to create a file with a name as embedded in the data. This can be a dangerous option as it allows to overwrite files. --completes-needed &ParmN; Number of completely trusted users to introduce a new key signer (defaults to 1). --marginals-needed &ParmN; Number of marginally trusted users to introduce a new key signer (defaults to 3) --max-cert-depth &ParmN; Maximum depth of a certification chain (default is 5). --cipher-algo &ParmName; Use &ParmName; as cipher algorithm. Running the program with the command --version yields a list of supported algorithms. If this is not used the cipher algorithm is selected from the preferences stored with the key. --digest-algo &ParmName; Use &ParmName; as message digest algorithm. Running the program with the command --version yields a list of supported algorithms. Please note that using this option may violate the OpenPGP requirement, that a 160 bit hash is to be used for DSA. --s2k-cipher-algo &ParmName; Use &ParmName; as the cipher algorithm used to protect secret keys. The default cipher is BLOWFISH. This cipher is also used for conventional encryption if --cipher-algo is not given. --s2k-digest-algo &ParmName; Use &ParmName; as the digest algorithm used to mangle the passphrases. The default algorithm is RIPE-MD-160. This digest algorithm is also used for conventional encryption if --digest-algo is not given. --s2k-mode &ParmN; Selects how passphrases are mangled. If &ParmN; is 0 a plain passphrase (which is not recommended) will be used, a 1 (default) adds a salt to the passphrase and a 3 iterates the whole process a couple of times. Unless --rfc1991 is used, this mode is also used for conventional encryption. --compress-algo &ParmN; Use compress algorithm &ParmN;. Default is 2 which is RFC1950 compression. You may use 1 to use the old zlib version (RFC1951) which is used by PGP. The default algorithm may give better results because the window size is not limited to 8K. If this is not used the OpenPGP behavior is used, i.e. the compression algorithm is selected from the preferences; note, that this can't be done if you do not encrypt the data. --disable-cipher-algo &ParmName; Never allow the use of &ParmName; as cipher algorithm. The given name will not be checked so that a later loaded algorithm will still get disabled. --disable-pubkey-algo &ParmName; Never allow the use of &ParmName; as public key algorithm. The given name will not be checked so that a later loaded algorithm will still get disabled. --no-sig-cache Do not cache the verification status of key signatures. Caching gives a much better performance in key listings. However, if you suspect that your public keyring is not save against write modifications, you can use this option to disable the caching. It probably does not make sense to disable it because all kind of damage can be done if someone else has write access to your public keyring. --no-sig-create-check GnuPG normally verifies each signature right after creation to protect against bugs and hardware malfunctions which could leak out bits from the secret key. This extra verification needs some time (about 115% for DSA keys), and so this option can be used to disable it. However, due to the fact that the signature creation needs manual interaction, this performance penalty does not matter in most settings. --throw-keyid Do not put the keyid into encrypted packets. This option hides the receiver of the message and is a countermeasure against traffic analysis. It may slow down the decryption process because all available secret keys are tried. --not-dash-escaped This option changes the behavior of cleartext signatures so that they can be used for patch files. You should not send such an armored file via email because all spaces and line endings are hashed too. You can not use this option for data which has 5 dashes at the beginning of a line, patch files don't have this. A special armor header line tells GnuPG about this cleartext signature option. --escape-from-lines Because some mailers change lines starting with "From " to "<From " it is good to handle such lines in a special way when creating cleartext signatures. All other PGP versions do it this way too. This option is not enabled by default because it would violate rfc2440. --passphrase-fd &ParmN; Read the passphrase from file descriptor &ParmN;. If you use 0 for &ParmN;, the passphrase will be read from stdin. This can only be used if only one passphrase is supplied. Don't use this option if you can avoid it. --command-fd &ParmN; This is a replacement for the deprecated shared-memory IPC mode. If this option is enabled, user input on questions is not expected from the TTY but from the given file descriptor. It should be used together with --status-fd. See the file doc/DETAILS in the source distribution for details on how to use it. --use-agent Try to use the GnuPG-Agent. Please note that this agent is still under development. With this option, GnuPG first tries to connect to the agent before it asks for a passphrase. --rfc1991 Try to be more RFC1991 (PGP 2.x) compliant. --openpgp Reset all packet, cipher and digest options to OpenPGP behavior. Use this option to reset all previous options like --rfc1991, --force-v3-sigs, --s2k-*, --cipher-algo, --digest-algo and --compress-algo to OpenPGP compliant values. All PGP workarounds are also disabled. --force-v3-sigs OpenPGP states that an implementation should generate v4 signatures but PGP 5.x recognizes v4 signatures only on key material. This option forces v3 signatures for signatures on data. --force-mdc Force the use of encryption with appended manipulation code. This is always used with the newer ciphers (those with a blocksize greater than 64 bit). This option might not be implemented yet. --allow-non-selfsigned-uid Allow the import of keys with user IDs which are not self-signed, but have at least one signature. This only allows the import - key validation will fail and you have to check the validity of the key my other means. This hack is needed for some German keys generated with pgp 2.6.3in. You should really avoid using it, because OpenPGP has better mechanics to do separate signing and encryption keys. --allow-freeform-uid Disable all checks on the form of the user ID while generating a new one. This option should only be used in very special environments as it does not ensure the de-facto standard format of user IDs. --ignore-time-conflict GnuPG normally checks that the timestamps associated with keys and signatures have plausible values. However, sometimes a signature seems to be older than the key due to clock problems. This option makes these checks just a warning. --ignore-valid-from GnuPG normally does not select and use subkeys created in the future. This option allows the use of such keys and thus exhibits the pre-1.0.7 behaviour. You should not use this option unless you there is some clock problem. --ignore-crc-error The ASCII armor used by OpenPG is protected by a CRC checksum against transmission errors. Sometimes it happens that the CRC gets mangled somewhere on the transmission channel but the actual content (which is anyway protected by the OpenPGP protocol) is still okay. This option will let gpg ignore CRC errors. --lock-once Lock the databases the first time a lock is requested and do not release the lock until the process terminates. --lock-multiple Release the locks every time a lock is no longer needed. Use this to override a previous --lock-once from a config file. --lock-never Disable locking entirely. This option should be used only in very special environments, where it can be assured that only one process is accessing those files. A bootable floppy with a stand-alone encryption system will probably use this. Improper usage of this option may lead to data and key corruption. --no-random-seed-file GnuPG uses a file to store its internal random pool over invocations. This makes random generation faster; however sometimes write operations are not desired. This option can be used to achieve that with the cost of slower random generation. --no-verbose Reset verbose level to 0. --no-greeting Suppress the initial copyright message but do not enter batch mode. --no-secmem-warning Suppress the warning about "using insecure memory". --no-armor Assume the input data is not in ASCII armored format. --no-default-keyring Do not add the default keyrings to the list of keyrings. --skip-verify Skip the signature verification step. This may be used to make the decryption faster if the signature verification is not needed. --with-colons Print key listings delimited by colons. Note, that the output will be encoded in UTF-8 regardless of any --charset setting. --with-key-data Print key listings delimited by colons and print the public key data. --with-fingerprint Same as the command --fingerprint but changes only the format of the output and may be used together with another command. --fast-list-mode Changes the output of the list commands to work faster; this is achieved by leaving some parts empty. Some applications don't need the user ID and the trust information given in the listings. By using this options they can get a faster listing. The exact behaviour of this option may change in future versions. --fixed-list-mode Do not merge user ID and primary key in --with-colon listing mode and print all timestamps as seconds since 1970-01-01. --list-only Changes the behaviour of some commands. This is like --dry-run but different in some cases. The semantic of this command may be extended in the future. Currently it only skips the actual decryption pass and therefore enables a fast listing of the encryption keys. --no-literal This is not for normal use. Use the source to see for what it might be useful. --set-filesize This is not for normal use. Use the source to see for what it might be useful. --emulate-md-encode-bug GnuPG versions prior to 1.0.2 had a bug in the way a signature was encoded. This options enables a workaround by checking faulty signatures again with the encoding used in old versions. This may only happen for ElGamal signatures which are not widely used. --show-session-key Display the session key used for one message. See --override-session-key for the counterpart of this option. We think that Key-Escrow is a Bad Thing; however the user should have the freedom to decide whether to go to prison or to reveal the content of one specific message without compromising all messages ever encrypted for one secret key. DON'T USE IT UNLESS YOU ARE REALLY FORCED TO DO SO. --override-session-key &ParmString; Don't use the public key but the session key &ParmString;. The format of this string is the same as the one printed by --show-session-key. This option is normally not used but comes handy in case someone forces you to reveal the content of an encrypted message; using this option you can do this without handing out the secret key. --merge-only Don't insert new keys into the keyrings while doing an import. --allow-secret-key-import Allow import of secret keys. The import command normally skips secret keys because a secret key can otherwise be used to attack the trust calculation. --try-all-secrets Don't look at the key ID as stored in the message but try all secret keys in turn to find the right decryption key. This option forces the behaviour as used by anonymous recipients (created by using --throw-keyid) and might come handy in case where an encrypted message contains a bogus key ID. --enable-special-filenames This options enables a mode in which filenames of the form -&n, where n is a non-negative decimal number, refer to the file descriptor n and not to a file with that name. --no-expensive-trust-checks Experimental use only. --preserve-permissions Don't change the permissions of a secret keyring back to user read/write only. Use this option only if you really know what you are doing. --preference-list &ParmString Set the list of preferences to &ParmString;, this list should be a string similar to the one printed by the command "pref" in the edit menu. How to specify a user ID There are different ways on how to specify a user ID to GnuPG; here are some examples: 234567C4 0F34E556E 01347A56A 0xAB123456 Here the key ID is given in the usual short form. 234AABBCC34567C4 0F323456784E56EAB 01AB3FED1347A5612 0x234AABBCC34567C4 Here the key ID is given in the long form as used by OpenPGP. 1234343434343434C434343434343434 123434343434343C3434343434343734349A3434 0E12343434343434343434EAB3484343434343434 0xE12343434343434343434EAB3484343434343434 The best way to specify a key ID is by using the fingerprint of the key. This avoids any ambiguities in case that there are duplicated key IDs (which are really rare for the long key IDs). =Heinrich Heine <heinrichh@uni-duesseldorf.de> Using an exact to match string. The equal sign indicates this. <heinrichh@uni-duesseldorf.de> Using the email address part which must match exactly. The left angle bracket indicates this email address mode. +Heinrich Heine duesseldorf All words must match exactly (not case sensitive) but can appear in any order in the user ID. Words are any sequences of letters, digits, the underscore and all characters with bit 7 set. #34 Using the Local ID. This is a very low level method and should only be used by applications which really need it. The hash character indicates this method. An application should not assume that this is only a number. Heine *Heine By case insensitive substring matching. This is the default mode but applications may want to explicitly indicate this by putting the asterisk in front. Note that you can append an exclamation mark to key IDs or fingerprints. This flag which tells GnuPG to use exactly that primary or secondary key and don't try to figure out which secondary or primary key to use. RETURN VALUE The program returns 0 if everything was fine, 1 if at least a signature was bad, and other error codes for fatal errors. EXAMPLES gpg -se -r sign and encrypt for user Bob gpg --clearsign &ParmFile; make a clear text signature gpg -sb &ParmFile; make a detached signature gpg --list-keys show keys gpg --fingerprint show fingerprint gpg --verify gpg --verify Verify the signature of the file but do not output the data. The second form is used for detached signatures, where ENVIRONMENT HOME Used to locate the default home directory. GNUPGHOME If set directory used instead of "~/.gnupg". http_proxy Only honored when the option --honor-http-proxy is set. FILES ~/.gnupg/secring.gpg The secret keyring ~/.gnupg/secring.gpg.lock and the lock file ~/.gnupg/pubring.gpg The public keyring ~/.gnupg/pubring.gpg.lock and the lock file ~/.gnupg/trustdb.gpg The trust database ~/.gnupg/trustdb.gpg.lock and the lock file ~/.gnupg/random_seed used to preserve the internal random pool ~/.gnupg/options May contain options /usr[/local]/share/gnupg/options.skel Skeleton options file /usr[/local]/lib/gnupg/ Default location for extensions WARNINGS Use a *good* password for your user account and a *good* passphrase to protect your secret key. This passphrase is the weakest part of the whole system. Programs to do dictionary attacks on your secret keyring are very easy to write and so you should protect your "~/.gnupg/" directory very well. Keep in mind that, if this program is used over a network (telnet), it is *very* easy to spy out your passphrase! If you are going to verify detached signatures, make sure that the program knows about it; either be giving both filenames on the commandline or using - to specify stdin. BUGS On many systems this program should be installed as setuid(root). This is necessary to lock memory pages. Locking memory pages prevents the operating system from writing memory pages to disk. If you get no warning message about insecure memory your operating system supports locking without being root. The program drops root privileges as soon as locked memory is allocated.