# speedo.mk - Speedo rebuilds speedily.
# Copyright (C) 2008, 2014, 2019 g10 Code GmbH
#
# speedo is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# speedo is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <http://www.gnu.org/licenses/>.
# speedo builds gnupg-related packages from GIT and installs them in a
# user directory, thereby providing a non-obstrusive test environment.
# speedo does only work with GNU make. The build system is similar to
# that of gpg4win. The following commands are supported:
#
# make -f speedo.mk all pkg2rep=/dir/with/tarballs
# or
# make -f speedo.mk
#
# Builds all packages and installs them under PLAY/inst. At the end,
# speedo prints commands that can be executed in the local shell to
# make use of the installed packages.
#
# make -f speedo.mk clean
# or
# make -f speedo.mk clean-PACKAGE
#
# Removes all packages or the package PACKAGE from the installation
# and build tree. A subsequent make will rebuild these (and only
# these) packages.
#
# make -f speedo.mk report
# or
# make -f speedo.mk report-PACKAGE
#
# Lists packages and versions.
#
# The information reyured to sign the tarballs and binaries
# are expected in the developer specific file ~/.gnupg-autogen.rc".
# Here is an example:
#--8<---------------cut here---------------start------------->8---
# # Location of the released tarball archives. Note that this is an
# # internal archive and before uploading this to the public server,
# # manual tests should be run and the git release tagged and pushed.
# # This is greped by the Makefile.
# RELEASE_ARCHIVE=foo@somehost:tarball-archive
#
# # The key used to sign the released sources.
# # This is greped by the Makefile.
# RELEASE_SIGNKEY=6DAA6E64A76D2840571B4902528897B826403ADA
#
# # For signing Windows binaries we need to employ a Windows machine.
# # We connect to this machine via ssh and take the connection
# # parameters via .ssh/config. For example a VM could be specified
# # like this:
# #
# # Host authenticode-signhost
# # HostName localhost
# # Port 27042
# # User gpgsign
# #
# # Depending on the used token it might be necessary to allow single
# # signon and unlock the token before running the make. The following
# # variable references this entry. This is greped by the Makefile.
# AUTHENTICODE_SIGNHOST=authenticode-signhost
#
# # The name of the signtool as used on Windows.
# # This is greped by the Makefile.
# AUTHENTICODE_TOOL="C:\Program Files (x86)\Windows Kits\10\bin\signtool.exe"
#
# # To use osslsigncode the follwing entries are required and
# # an empty string must be given for AUTHENTICODE_SIGNHOST.
# # They are greped by the Makefile.
# AUTHENTICODE_KEY=/home/foo/.gnupg/my-authenticode-key.p12
# AUTHENTICODE_CERTS=/home/foo/.gnupg/my-authenticode-certs.pem
#
# If a tarball has not been published while building a release it
# may be stored in a directory specified by:
# OVERRIDE_TARBALLS=/home/foo/override-tarballs
#--8<---------------cut here---------------end--------------->8---
# We need to know our own name.
SPEEDO_MK := $(realpath $(lastword $(MAKEFILE_LIST)))
.PHONY : help native native-gui w32-installer w32-source w32-wixlib
.PHONY : git-native git-native-gui git-w32-installer git-w32-source
.PHONY : this-native this-native-gui this-w32-installer this-w32-source
help:
@echo 'usage: make -f speedo.mk TARGET'
@echo ' with TARGET being one of:'
@echo ' help This help'
@echo ' native Native build of the GnuPG core'
@echo ' native-gui Ditto but with pinentry and GPA'
@echo ' w32-installer Build a Windows installer'
@echo ' w32-source Pack a source archive'
@echo ' w32-release Build a Windows release'
@echo ' w32-wixlib Build a wixlib for MSI packages'
@echo ' w32-sign-installer Sign the installer'
@echo
@echo 'You may append INSTALL_PREFIX=<dir> for native builds.'
@echo 'Prepend TARGET with "git-" to build from GIT repos.'
@echo 'Prepend TARGET with "this-" to build from the source tarball.'
@echo 'Use STATIC=1 to build with statically linked libraries.'
@echo 'Use SELFCHECK=0 for a non-released version.'
@echo 'Use CUSTOM_SWDB=1 for an already downloaded swdb.lst.'
@echo 'Use WIXPREFIX to provide the WIX binaries for the MSI package.'
@echo ' Using WIX also requires wine with installed wine mono.'
@echo ' See help-wixlib for more information'
help-wixlib:
@echo 'The buildsystem can create a wixlib to build MSI packages.'
@echo ''
@echo 'On debian install the packages "wine"'
@echo ' apt-get install wine'
@echo ''
@echo 'Download the wine-mono msi:'
@echo ' https://dl.winehq.org/wine/wine-mono/'
@echo ''
@echo 'Install it:'
@echo ' wine msiexec /i ~/Downloads/wine-mono-4.9.4.msi'
@echo ''
@echo 'Download the wix toolset binary zip from:'
@echo ' https://github.com/wixtoolset/wix3/releases'
@echo 'The default folder searches for ~/w32root/wixtools'
@echo 'Alternative locations can be passed by WIXPREFIX variable'
@echo ' unzip -d ~/w32root/wixtools ~/Downloads/wix311-binaries.zip'
@echo ''
@echo 'Afterwards w32-release will build also a wixlib.'
# NB: we can't use +$(MAKE) here because we would need to define the
# dependencies of our packages. This does not make much sense given that
# we have a clear order in how they are build and concurrent builds
# would anyway clutter up the logs.
SPEEDOMAKE := $(MAKE) -f $(SPEEDO_MK) UPD_SWDB=1
native: check-tools
$(SPEEDOMAKE) TARGETOS=native WHAT=release WITH_GUI=0 all
git-native: check-tools
$(SPEEDOMAKE) TARGETOS=native WHAT=git WITH_GUI=0 all
this-native: check-tools
$(SPEEDOMAKE) TARGETOS=native WHAT=this WITH_GUI=0 all
native-gui: check-tools
$(SPEEDOMAKE) TARGETOS=native WHAT=release WITH_GUI=1 all
git-native-gui: check-tools
$(SPEEDOMAKE) TARGETOS=native WHAT=git WITH_GUI=1 all
this-native-gui: check-tools
$(SPEEDOMAKE) TARGETOS=native WHAT=this WITH_GUI=1 all
w32-installer: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=release WITH_GUI=0 installer
git-w32-installer: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=git WITH_GUI=0 installer
this-w32-installer: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=this WITH_GUI=0 \
CUSTOM_SWDB=1 installer
w32-wixlib: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=release WITH_GUI=0 wixlib
git-w32-wixlib: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=git WITH_GUI=0 wixlib
this-w32-wixlib: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=this WITH_GUI=0 \
CUSTOM_SWDB=1 wixlib
w32-source: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=release WITH_GUI=0 dist-source
git-w32-source: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=git WITH_GUI=0 dist-source
this-w32-source: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=this WITH_GUI=0 \
CUSTOM_SWDB=1 dist-source
w32-release: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=release WITH_GUI=0 SELFCHECK=0 \
installer-from-source
w32-sign-installer: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=release WITH_GUI=0 SELFCHECK=0 \
sign-installer
w32-release-offline: check-tools
$(SPEEDOMAKE) TARGETOS=w32 WHAT=release WITH_GUI=0 SELFCHECK=0 \
CUSTOM_SWDB=1 pkgrep=${HOME}/b pkg10rep=${HOME}/b \
installer-from-source
# Set this to "git" to build from git,
# to "release" from tarballs,
# to "this" from the unpacked sources.
WHAT=git
# Set target to "native" or "w32"
TARGETOS=
# Set to 1 to build the GUI tools
WITH_GUI=0
# Set to 1 to use a pre-installed swdb.lst instead of the online version.
CUSTOM_SWDB=0
# Set to 1 to really download the swdb.
UPD_SWDB=0
# Set to 0 to skip the GnuPG version self-check
SELFCHECK=1
# Set to 1 to build with statically linked libraries.
STATIC=0
# Set to the location of the directory with tarballs of
# external packages.
TARBALLS=$(shell pwd)/../tarballs
# Number of parallel make jobs in each package
MAKE_J=3
# Name to use for the w32 installer and sources
INST_NAME=gnupg-w32
# Use this to override the installaion directory for native builds.
INSTALL_PREFIX=none
# Set this to the location of wixtools
WIXPREFIX=$(shell readlink -f ~/w32root/wixtools)
# Read signing information from ~/.gnupg-autogen.rc
define READ_AUTOGEN_template
$(1) = $$(shell grep '^$(1)=' $$$$HOME/.gnupg-autogen.rc|cut -d= -f2)
endef
$(eval $(call READ_AUTOGEN_template,AUTHENTICODE_SIGNHOST))
$(eval $(call READ_AUTOGEN_template,AUTHENTICODE_TOOL))
$(eval $(call READ_AUTOGEN_template,AUTHENTICODE_KEY))
$(eval $(call READ_AUTOGEN_template,AUTHENTICODE_CERTS))
$(eval $(call READ_AUTOGEN_template,OSSLSIGNCODE))
$(eval $(call READ_AUTOGEN_template,OSSLPKCS11ENGINE))
$(eval $(call READ_AUTOGEN_template,SCUTEMODULE))
$(eval $(call READ_AUTOGEN_template,OVERRIDE_TARBALLS))
# All files given in AUTHENTICODE_FILES are signed before
# they are put into the installer.
AUTHENTICODE_FILES= \
dirmngr.exe \
dirmngr_ldap.exe \
gpg-agent.exe \
gpg-connect-agent.exe \
gpg-preset-passphrase.exe \
gpg-check-pattern.exe \
gpg-wks-client.exe \
gpg.exe \
gpgconf.exe \
gpgconf-w32.exe \
gpgme-w32spawn.exe \
gpgsm.exe \
gpgtar.exe \
gpgv.exe \
libassuan-0.dll \
libgcrypt-20.dll \
libgpg-error-0.dll \
libgpgme-11.dll \
libksba-8.dll \
libnpth-0.dll \
libsqlite3-0.dll \
pinentry-w32.exe \
scdaemon.exe \
zlib1.dll
# Directory names.
# They must be absolute, as we switch directories pretty often.
root := $(shell pwd)/PLAY
sdir := $(root)/src
bdir := $(root)/build
bdir6:= $(root)/build-w64
ifeq ($(INSTALL_PREFIX),none)
idir := $(root)/inst
else
idir := $(abspath $(INSTALL_PREFIX))
endif
idir6:= $(root)/inst-w64
stampdir := $(root)/stamps
topsrc := $(shell cd $(dir $(SPEEDO_MK)).. && pwd)
auxsrc := $(topsrc)/build-aux/speedo
patdir := $(topsrc)/build-aux/speedo/patches
w32src := $(topsrc)/build-aux/speedo/w32
# =====BEGIN LIST OF PACKAGES=====
# The packages that should be built. The order is also the build order.
# Fixme: Do we need to build pkg-config for cross-building?
speedo_spkgs = \
libgpg-error npth libgcrypt
ifeq ($(TARGETOS),w32)
speedo_spkgs += \
zlib bzip2 sqlite
ifeq ($(WITH_GUI),1)
speedo_spkgs += gettext libiconv
endif
endif
speedo_spkgs += \
libassuan libksba
ifeq ($(TARGETOS),w32)
speedo_spkgs += \
ntbtls
endif
speedo_spkgs += \
gnupg
ifeq ($(TARGETOS),w32)
ifeq ($(WITH_GUI),1)
speedo_spkgs += \
libffi glib pkg-config
endif
endif
ifeq ($(STATIC),0)
speedo_spkgs += \
gpgme
endif
ifeq ($(TARGETOS),w32)
ifeq ($(WITH_GUI),1)
speedo_spkgs += \
libpng \
gdk-pixbuf atk pixman cairo pango gtk+
endif
endif
ifeq ($(TARGETOS),w32)
speedo_spkgs += pinentry
ifeq ($(WITH_GUI),1)
speedo_spkgs += gpa gpgex
endif
else
ifeq ($(WITH_GUI),1)
speedo_spkgs += pinentry gpa
endif
endif
# =====END LIST OF PACKAGES=====
# Packages which are additionally build for 64 bit Windows. They are
# only used for gpgex and thus we need to build them only if we want
# a full installer.
speedo_w64_spkgs =
ifeq ($(WITH_GUI),1)
speedo_w64_spkgs += libgpg-error libiconv gettext libassuan gpgex
endif
# Packages which use the gnupg autogen.sh build style
speedo_gnupg_style = \
libgpg-error npth libgcrypt \
libassuan libksba ntbtls gnupg gpgme \
pinentry gpa gpgex
# Packages which use only make and no build directory
speedo_make_only_style = \
zlib bzip2
# Get the content of the software DB.
ifeq ($(CUSTOM_SWDB),1)
getswdb_options = --skip-download --skip-verify
else
getswdb_options =
endif
ifeq ($(SELFCHECK),0)
getswdb_options += --skip-selfcheck
endif
ifeq ($(UPD_SWDB),1)
SWDB := $(shell $(topsrc)/build-aux/getswdb.sh $(getswdb_options) && echo okay)
ifeq ($(strip $(SWDB)),)
ifneq ($(WHAT),git)
$(error Error getting GnuPG software version database)
endif
endif
# Version numbers of the released packages
gnupg_ver_this = $(shell cat $(topsrc)/VERSION)
gnupg_ver := $(shell awk '$$1=="gnupg22_ver" {print $$2}' swdb.lst)
libgpg_error_ver := $(shell awk '$$1=="libgpg_error_ver" {print $$2}' swdb.lst)
libgpg_error_sha1:= $(shell awk '$$1=="libgpg_error_sha1" {print $$2}' swdb.lst)
libgpg_error_sha2:= $(shell awk '$$1=="libgpg_error_sha2" {print $$2}' swdb.lst)
npth_ver := $(shell awk '$$1=="npth_ver" {print $$2}' swdb.lst)
npth_sha1 := $(shell awk '$$1=="npth_sha1" {print $$2}' swdb.lst)
npth_sha2 := $(shell awk '$$1=="npth_sha2" {print $$2}' swdb.lst)
libgcrypt_ver := $(shell awk '$$1=="libgcrypt18_ver" {print $$2}' swdb.lst)
libgcrypt_sha1 := $(shell awk '$$1=="libgcrypt18_sha1" {print $$2}' swdb.lst)
libgcrypt_sha2 := $(shell awk '$$1=="libgcrypt18_sha2" {print $$2}' swdb.lst)
libassuan_ver := $(shell awk '$$1=="libassuan_ver" {print $$2}' swdb.lst)
libassuan_sha1 := $(shell awk '$$1=="libassuan_sha1" {print $$2}' swdb.lst)
libassuan_sha2 := $(shell awk '$$1=="libassuan_sha2" {print $$2}' swdb.lst)
libksba_ver := $(shell awk '$$1=="libksba_ver" {print $$2}' swdb.lst)
libksba_sha1 := $(shell awk '$$1=="libksba_sha1" {print $$2}' swdb.lst)
libksba_sha2 := $(shell awk '$$1=="libksba_sha2" {print $$2}' swdb.lst)
ntbtls_ver := $(shell awk '$$1=="ntbtls_ver" {print $$2}' swdb.lst)
ntbtls_sha1 := $(shell awk '$$1=="ntbtls_sha1" {print $$2}' swdb.lst)
ntbtls_sha2 := $(shell awk '$$1=="ntbtls_sha2" {print $$2}' swdb.lst)
gpgme_ver := $(shell awk '$$1=="gpgme_ver" {print $$2}' swdb.lst)
gpgme_sha1 := $(shell awk '$$1=="gpgme_sha1" {print $$2}' swdb.lst)
gpgme_sha2 := $(shell awk '$$1=="gpgme_sha2" {print $$2}' swdb.lst)
pinentry_ver := $(shell awk '$$1=="pinentry_ver" {print $$2}' swdb.lst)
pinentry_sha1 := $(shell awk '$$1=="pinentry_sha1" {print $$2}' swdb.lst)
pinentry_sha2 := $(shell awk '$$1=="pinentry_sha2" {print $$2}' swdb.lst)
gpa_ver := $(shell awk '$$1=="gpa_ver" {print $$2}' swdb.lst)
gpa_sha1 := $(shell awk '$$1=="gpa_sha1" {print $$2}' swdb.lst)
gpa_sha2 := $(shell awk '$$1=="gpa_sha2" {print $$2}' swdb.lst)
gpgex_ver := $(shell awk '$$1=="gpgex_ver" {print $$2}' swdb.lst)
gpgex_sha1 := $(shell awk '$$1=="gpgex_sha1" {print $$2}' swdb.lst)
gpgex_sha2 := $(shell awk '$$1=="gpgex_sha2" {print $$2}' swdb.lst)
zlib_ver := $(shell awk '$$1=="zlib_ver" {print $$2}' swdb.lst)
zlib_sha1 := $(shell awk '$$1=="zlib_sha1_gz" {print $$2}' swdb.lst)
zlib_sha2 := $(shell awk '$$1=="zlib_sha2_gz" {print $$2}' swdb.lst)
bzip2_ver := $(shell awk '$$1=="bzip2_ver" {print $$2}' swdb.lst)
bzip2_sha1 := $(shell awk '$$1=="bzip2_sha1_gz" {print $$2}' swdb.lst)
bzip2_sha2 := $(shell awk '$$1=="bzip2_sha2_gz" {print $$2}' swdb.lst)
sqlite_ver := $(shell awk '$$1=="sqlite_ver" {print $$2}' swdb.lst)
sqlite_sha1 := $(shell awk '$$1=="sqlite_sha1_gz" {print $$2}' swdb.lst)
sqlite_sha2 := $(shell awk '$$1=="sqlite_sha2_gz" {print $$2}' swdb.lst)
$(info Information from the version database)
$(info GnuPG ..........: $(gnupg_ver) (building $(gnupg_ver_this)))
$(info Libgpg-error ...: $(libgpg_error_ver))
$(info Npth ...........: $(npth_ver))
$(info Libgcrypt ......: $(libgcrypt_ver))
$(info Libassuan ......: $(libassuan_ver))
$(info Libksba ........: $(libksba_ver))
$(info Zlib ...........: $(zlib_ver))
$(info Bzip2 ..........: $(bzip2_ver))
$(info SQLite .........: $(sqlite_ver))
$(info NtbTLS .. ......: $(ntbtls_ver))
$(info GPGME ..........: $(gpgme_ver))
$(info Pinentry .......: $(pinentry_ver))
$(info GPA ............: $(gpa_ver))
$(info GpgEX.... ......: $(gpgex_ver))
endif
# Version number for external packages
pkg_config_ver = 0.23
libiconv_ver = 1.14
gettext_ver = 0.18.2.1
libffi_ver = 3.0.13
glib_ver = 2.34.3
libpng_ver = 1.4.12
gdk_pixbuf_ver = 2.26.5
atk_ver = 1.32.0
pango_ver = 1.29.4
pixman_ver = 0.32.4
cairo_ver = 1.12.16
gtk__ver = 2.24.17
# The GIT repository. Using a local repo is much faster.
#gitrep = git://git.gnupg.org
gitrep = ${HOME}/s
# The tarball directories
pkgrep = https://gnupg.org/ftp/gcrypt
pkg10rep = ftp://ftp.g10code.com/g10code
pkg2rep = $(TARBALLS)
# For each package, the following variables can be defined:
#
# speedo_pkg_PACKAGE_git: The GIT repository that should be built.
# speedo_pkg_PACKAGE_gitref: The GIT revision to checkout
#
# speedo_pkg_PACKAGE_tar: URL to the tar file that should be built.
#
# Exactly one of the above variables is required. Note that this
# version of speedo does not cache repositories or tar files, and does
# not test the integrity of the downloaded software. If you care
# about this, you can also specify filenames to locally verified files.
# Filenames are differentiated from URLs by starting with a slash '/'.
#
# speedo_pkg_PACKAGE_configure: Extra arguments to configure.
#
# speedo_pkg_PACKAGE_make_args: Extra arguments to make.
#
# speedo_pkg_PACKAGE_make_args_inst: Extra arguments to make install.
#
# Note that you can override the defaults in this file in a local file
# "config.mk"
ifeq ($(WHAT),this)
else ifeq ($(WHAT),git)
speedo_pkg_libgpg_error_git = $(gitrep)/libgpg-error
speedo_pkg_libgpg_error_gitref = master
speedo_pkg_npth_git = $(gitrep)/npth
speedo_pkg_npth_gitref = master
speedo_pkg_libassuan_git = $(gitrep)/libassuan
speedo_pkg_libassuan_gitref = master
speedo_pkg_libgcrypt_git = $(gitrep)/libgcrypt
speedo_pkg_libgcrypt_gitref = master
speedo_pkg_libksba_git = $(gitrep)/libksba
speedo_pkg_libksba_gitref = master
speedo_pkg_ntbtls_git = $(gitrep)/ntbtls
speedo_pkg_ntbtls_gitref = master
speedo_pkg_gpgme_git = $(gitrep)/gpgme
speedo_pkg_gpgme_gitref = master
speedo_pkg_pinentry_git = $(gitrep)/pinentry
speedo_pkg_pinentry_gitref = master
speedo_pkg_gpa_git = $(gitrep)/gpa
speedo_pkg_gpa_gitref = master
speedo_pkg_gpgex_git = $(gitrep)/gpgex
speedo_pkg_gpgex_gitref = master
else ifeq ($(WHAT),release)
speedo_pkg_libgpg_error_tar = \
$(pkgrep)/libgpg-error/libgpg-error-$(libgpg_error_ver).tar.bz2
speedo_pkg_npth_tar = \
$(pkgrep)/npth/npth-$(npth_ver).tar.bz2
speedo_pkg_libassuan_tar = \
$(pkgrep)/libassuan/libassuan-$(libassuan_ver).tar.bz2
speedo_pkg_libgcrypt_tar = \
$(pkgrep)/libgcrypt/libgcrypt-$(libgcrypt_ver).tar.bz2
speedo_pkg_libksba_tar = \
$(pkgrep)/libksba/libksba-$(libksba_ver).tar.bz2
speedo_pkg_ntbtls_tar = \
$(pkgrep)/ntbtls/ntbtls-$(ntbtls_ver).tar.bz2
speedo_pkg_gpgme_tar = \
$(pkgrep)/gpgme/gpgme-$(gpgme_ver).tar.bz2
speedo_pkg_pinentry_tar = \
$(pkgrep)/pinentry/pinentry-$(pinentry_ver).tar.bz2
speedo_pkg_gpa_tar = \
$(pkgrep)/gpa/gpa-$(gpa_ver).tar.bz2
speedo_pkg_gpgex_tar = \
$(pkg10rep)/gpgex/gpgex-$(gpgex_ver).tar.bz2
else
$(error invalid value for WHAT (use on of: git release this))
endif
speedo_pkg_pkg_config_tar = $(pkg2rep)/pkg-config-$(pkg_config_ver).tar.gz
speedo_pkg_zlib_tar = $(pkgrep)/zlib/zlib-$(zlib_ver).tar.gz
speedo_pkg_bzip2_tar = $(pkgrep)/bzip2/bzip2-$(bzip2_ver).tar.gz
speedo_pkg_sqlite_tar = $(pkgrep)/sqlite/sqlite-autoconf-$(sqlite_ver).tar.gz
speedo_pkg_libiconv_tar = $(pkg2rep)/libiconv-$(libiconv_ver).tar.gz
speedo_pkg_gettext_tar = $(pkg2rep)/gettext-$(gettext_ver).tar.gz
speedo_pkg_libffi_tar = $(pkg2rep)/libffi-$(libffi_ver).tar.gz
speedo_pkg_glib_tar = $(pkg2rep)/glib-$(glib_ver).tar.xz
speedo_pkg_libpng_tar = $(pkg2rep)/libpng-$(libpng_ver).tar.bz2
speedo_pkg_gdk_pixbuf_tar = $(pkg2rep)/gdk-pixbuf-$(gdk_pixbuf_ver).tar.xz
speedo_pkg_atk_tar = $(pkg2rep)/atk-$(atk_ver).tar.bz2
speedo_pkg_pango_tar = $(pkg2rep)/pango-$(pango_ver).tar.bz2
speedo_pkg_pixman_tar = $(pkg2rep)/pixman-$(pixman_ver).tar.gz
speedo_pkg_cairo_tar = $(pkg2rep)/cairo-$(cairo_ver).tar.xz
speedo_pkg_gtk__tar = $(pkg2rep)/gtk+-$(gtk__ver).tar.xz
#
# Package build options
#
speedo_pkg_npth_configure = --enable-static
speedo_pkg_libgpg_error_configure = --enable-static --enable-install-gpg-error-config
speedo_pkg_w64_libgpg_error_configure = --enable-static --enable-install-gpg-error-config
speedo_pkg_libassuan_configure = --enable-static
speedo_pkg_w64_libassuan_configure = --enable-static
speedo_pkg_libgcrypt_configure = --disable-static
speedo_pkg_libksba_configure = --disable-static
speedo_pkg_ntbtls_configure = --enable-static
ifeq ($(STATIC),1)
speedo_pkg_npth_configure += --disable-shared
speedo_pkg_libgpg_error_configure += --disable-shared
speedo_pkg_libassuan_configure += --disable-shared
speedo_pkg_libgcrypt_configure += --disable-shared
speedo_pkg_libksba_configure += --disable-shared
endif
# For now we build ntbtls only static
speedo_pkg_ntbtls_configure = --disable-shared
ifeq ($(TARGETOS),w32)
speedo_pkg_gnupg_configure = \
--disable-g13 --enable-ntbtls
else
speedo_pkg_gnupg_configure = --disable-g13 --enable-wks-tools
endif
speedo_pkg_gnupg_extracflags = -g
# Create the version info files only for W32 so that they won't get
# installed if for example INSTALL_PREFIX=/usr/local is used.
ifeq ($(TARGETOS),w32)
define speedo_pkg_gnupg_post_install
(set -e; \
sed -n 's/.*PACKAGE_VERSION "\(.*\)"/\1/p' config.h >$(idir)/INST_VERSION; \
sed -n 's/.*W32INFO_VI_PRODUCTVERSION \(.*\)/\1/p' common/w32info-rc.h \
|sed 's/,/./g' >$(idir)/INST_PROD_VERSION )
endef
endif
# The LDFLAGS is needed for -lintl for glib.
ifeq ($(WITH_GUI),1)
speedo_pkg_gpgme_configure = \
--enable-static --enable-w32-glib \
--with-gpg-error-prefix=$(idir) \
LDFLAGS=-L$(idir)/lib
else
speedo_pkg_gpgme_configure = \
--disable-static --disable-w32-glib \
--with-gpg-error-prefix=$(idir) \
LDFLAGS=-L$(idir)/lib
endif
ifeq ($(TARGETOS),w32)
speedo_pkg_pinentry_configure = --disable-pinentry-gtk2
else
speedo_pkg_pinentry_configure = --enable-pinentry-gtk2
endif
speedo_pkg_pinentry_configure += \
--disable-pinentry-qt5 \
--disable-pinentry-qt \
--disable-pinentry-fltk \
--disable-pinentry-tty \
CPPFLAGS=-I$(idir)/include \
LDFLAGS=-L$(idir)/lib \
CXXFLAGS=-static-libstdc++
speedo_pkg_gpa_configure = \
--with-libiconv-prefix=$(idir) --with-libintl-prefix=$(idir) \
--with-gpgme-prefix=$(idir) --with-zlib=$(idir) \
--with-libassuan-prefix=$(idir) --with-gpg-error-prefix=$(idir)
speedo_pkg_gpgex_configure = \
--with-gpg-error-prefix=$(idir) \
--with-libassuan-prefix=$(idir) \
--enable-gpa-only
speedo_pkg_w64_gpgex_configure = \
--with-gpg-error-prefix=$(idir6) \
--with-libassuan-prefix=$(idir6) \
--enable-gpa-only
#
# External packages
#
# gcc 10.2 takes __udivdi3 from the exception handler DLL and thus
# requires it. This is a regression from gcc 8.3 and earlier. To fix
# this we need to pass -static-libgcc.
ifeq ($(TARGETOS),w32)
speedo_pkg_zlib_make_args = \
-fwin32/Makefile.gcc PREFIX=$(host)- IMPLIB=libz.dll.a \
LDFLAGS=-static-libgcc
speedo_pkg_zlib_make_args_inst = \
-fwin32/Makefile.gcc \
BINARY_PATH=$(idir)/bin INCLUDE_PATH=$(idir)/include \
LIBRARY_PATH=$(idir)/lib SHARED_MODE=1 IMPLIB=libz.dll.a
# Zlib needs some special magic to generate a libtool file.
# We also install the pc file here.
define speedo_pkg_zlib_post_install
(set -e; mkdir $(idir)/lib/pkgconfig || true; \
cp $(auxsrc)/zlib.pc $(idir)/lib/pkgconfig/; \
cd $(idir); \
echo "# Generated by libtool" > lib/libz.la \
echo "dlname='../bin/zlib1.dll'" >> lib/libz.la; \
echo "library_names='libz.dll.a'" >> lib/libz.la; \
echo "old_library='libz.a'" >> lib/libz.la; \
echo "dependency_libs=''" >> lib/libz.la; \
echo "current=1" >> lib/libz.la; \
echo "age=2" >> lib/libz.la; \
echo "revision=5" >> lib/libz.la; \
echo "installed=yes" >> lib/libz.la; \
echo "shouldnotlink=no" >> lib/libz.la; \
echo "dlopen=''" >> lib/libz.la; \
echo "dlpreopen=''" >> lib/libz.la; \
echo "libdir=\"$(idir)/lib\"" >> lib/libz.la)
endef
endif
ifeq ($(TARGETOS),w32)
speedo_pkg_bzip2_make_args = \
CC="$(host)-gcc" AR="$(host)-ar" RANLIB="$(host)-ranlib"
speedo_pkg_bzip2_make_args_inst = \
PREFIX=$(idir) CC="$(host)-gcc" AR="$(host)-ar" RANLIB="$(host)-ranlib"
endif
speedo_pkg_w64_libiconv_configure = \
--enable-shared=no --enable-static=yes
speedo_pkg_gettext_configure = \
--with-lib-prefix=$(idir) --with-libiconv-prefix=$(idir) \
CPPFLAGS=-I$(idir)/include LDFLAGS=-L$(idir)/lib
speedo_pkg_w64_gettext_configure = \
--with-lib-prefix=$(idir) --with-libiconv-prefix=$(idir) \
CPPFLAGS=-I$(idir6)/include LDFLAGS=-L$(idir6)/lib
speedo_pkg_gettext_extracflags = -O2
# We only need gettext-runtime and there is sadly no top level
# configure option for this
speedo_pkg_gettext_make_dir = gettext-runtime
speedo_pkg_glib_configure = \
--disable-modular-tests \
--with-libiconv=gnu \
CPPFLAGS=-I$(idir)/include \
LDFLAGS=-L$(idir)/lib \
CCC=$(host)-g++ \
LIBFFI_CFLAGS=-I$(idir)/lib/libffi-$(libffi_ver)/include \
LIBFFI_LIBS=\"-L$(idir)/lib -lffi\"
ifeq ($(TARGETOS),w32)
speedo_pkg_glib_extracflags = -march=i486
endif
ifeq ($(TARGETOS),w32)
speedo_pkg_libpng_configure = \
CPPFLAGS=\"-I$(idir)/include -DPNG_BUILD_DLL\" \
LDFLAGS=\"-L$(idir)/lib\" LIBPNG_DEFINES=\"-DPNG_BUILD_DLL\"
else
speedo_pkg_libpng_configure = \
CPPFLAGS=\"-I$(idir)/include\" \
LDFLAGS=\"-L$(idir)/lib\"
endif
ifneq ($(TARGETOS),w32)
speedo_pkg_gdk_pixbuf_configure = --without-libtiff --without-libjpeg
endif
speedo_pkg_pixman_configure = \
CPPFLAGS=-I$(idir)/include \
LDFLAGS=-L$(idir)/lib
ifeq ($(TARGETOS),w32)
speedo_pkg_cairo_configure = \
--disable-qt --disable-ft --disable-fc \
--enable-win32 --enable-win32-font \
CPPFLAGS=-I$(idir)/include \
LDFLAGS=-L$(idir)/lib
else
speedo_pkg_cairo_configure = \
--disable-qt \
CPPFLAGS=-I$(idir)/include \
LDFLAGS=-L$(idir)/lib
endif
speedo_pkg_pango_configure = \
--disable-gtk-doc \
CPPFLAGS=-I$(idir)/include \
LDFLAGS=-L$(idir)/lib
speedo_pkg_gtk__configure = \
--disable-cups \
CPPFLAGS=-I$(idir)/include \
LDFLAGS=-L$(idir)/lib
# ---------
all: all-speedo
report: report-speedo
clean: clean-speedo
ifeq ($(TARGETOS),w32)
STRIP = i686-w64-mingw32-strip
else
STRIP = strip
endif
W32CC = i686-w64-mingw32-gcc
-include config.mk
#
# The generic speedo code
#
MKDIR=mkdir
MAKENSIS=makensis
WINE=wine
SHA1SUM := $(shell $(topsrc)/build-aux/getswdb.sh --find-sha1sum)
ifeq ($(SHA1SUM),false)
$(error The sha1sum tool is missing)
endif
SHA2SUM := $(shell $(topsrc)/build-aux/getswdb.sh --find-sha256sum)
ifeq ($(SHA2SUM),false)
$(error The sha256sum tool is missing)
endif
BUILD_ISODATE=$(shell date -u +%Y-%m-%d)
BUILD_DATESTR=$(subst -,,$(BUILD_ISODATE))
# The next two macros will work only after gnupg has been build.
ifeq ($(TARGETOS),w32)
INST_VERSION=$(shell head -1 $(idir)/INST_VERSION)
INST_PROD_VERSION=$(shell head -1 $(idir)/INST_PROD_VERSION)
endif
# List with packages
speedo_build_list = $(speedo_spkgs)
speedo_w64_build_list = $(speedo_w64_spkgs)
# To avoid running external commands during the read phase (":=" style
# assignments), we check that the targetos has been given
ifneq ($(TARGETOS),)
# Determine build and host system
build := $(shell $(topsrc)/autogen.sh --silent --print-build)
ifeq ($(TARGETOS),w32)
speedo_autogen_buildopt := --build-w32
speedo_autogen_buildopt6 := --build-w64
host := $(shell $(topsrc)/autogen.sh --silent --print-host --build-w32)
host6:= $(shell $(topsrc)/autogen.sh --silent --print-host --build-w64)
speedo_host_build_option := --host=$(host) --build=$(build)
speedo_host_build_option6 := --host=$(host6) --build=$(build)
speedo_w32_cflags := -mms-bitfields
else
speedo_autogen_buildopt :=
host :=
speedo_host_build_option :=
speedo_w32_cflags :=
endif
ifeq ($(MAKE_J),)
speedo_makeopt=
else
speedo_makeopt=-j$(MAKE_J)
endif
# End non-empty TARGETOS
endif
# The playground area is our scratch area, where we unpack, build and
# install the packages.
$(stampdir)/stamp-directories:
$(MKDIR) -p $(root)
$(MKDIR) -p $(stampdir)
$(MKDIR) -p $(sdir)
$(MKDIR) -p $(bdir)
$(MKDIR) -p $(idir)
ifeq ($(TARGETOS),w32)
$(MKDIR) -p $(bdir6)
$(MKDIR) -p $(idir6)
endif
touch $(stampdir)/stamp-directories
# Frob the name $1 by converting all '-' and '+' characters to '_'.
define FROB_macro
$(subst +,_,$(subst -,_,$(1)))
endef
# Get the variable $(1) (which may contain '-' and '+' characters).
define GETVAR
$($(call FROB_macro,$(1)))
endef
# Set a couple of common variables.
define SETVARS
pkg="$(1)"; \
git="$(call GETVAR,speedo_pkg_$(1)_git)"; \
gitref="$(call GETVAR,speedo_pkg_$(1)_gitref)"; \
tar="$(call GETVAR,speedo_pkg_$(1)_tar)"; \
ver="$(call GETVAR,$(1)_ver)"; \
sha2="$(call GETVAR,$(1)_sha2)"; \
sha1="$(call GETVAR,$(1)_sha1)"; \
pkgsdir="$(sdir)/$(1)"; \
if [ "$(1)" = "gnupg" ]; then \
git=''; \
gitref=''; \
tar=''; \
pkgsdir="$(topsrc)"; \
fi; \
pkgbdir="$(bdir)/$(1)"; \
pkgcfg="$(call GETVAR,speedo_pkg_$(1)_configure)"; \
tmp="$(speedo_w32_cflags) \
$(call GETVAR,speedo_pkg_$(1)_extracflags)"; \
if [ x$$$$(echo "$$$$tmp" | tr -d '[:space:]')x != xx ]; then \
pkgextracflags="CFLAGS=\"$$$$tmp\""; \
else \
pkgextracflags=; \
fi; \
pkgmkdir="$(call GETVAR,speedo_pkg_$(1)_make_dir)"; \
pkgmkargs="$(call GETVAR,speedo_pkg_$(1)_make_args)"; \
pkgmkargs_inst="$(call GETVAR,speedo_pkg_$(1)_make_args_inst)"; \
pkgmkargs_uninst="$(call GETVAR,speedo_pkg_$(1)_make_args_uninst)"; \
export PKG_CONFIG="/usr/bin/pkg-config"; \
export PKG_CONFIG_PATH="$(idir)/lib/pkgconfig"; \
[ "$(TARGETOS)" != native ] && export PKG_CONFIG_LIBDIR=""; \
export SYSROOT="$(idir)"; \
export PATH="$(idir)/bin:$${PATH}"; \
export LD_LIBRARY_PATH="$(idir)/lib:$${LD_LIBRARY_PATH}"
endef
define SETVARS_W64
pkg="$(1)"; \
git="$(call GETVAR,speedo_pkg_$(1)_git)"; \
gitref="$(call GETVAR,speedo_pkg_$(1)_gitref)"; \
tar="$(call GETVAR,speedo_pkg_$(1)_tar)"; \
ver="$(call GETVAR,$(1)_ver)"; \
sha2="$(call GETVAR,$(1)_sha2)"; \
sha1="$(call GETVAR,$(1)_sha1)"; \
pkgsdir="$(sdir)/$(1)"; \
if [ "$(1)" = "gnupg" ]; then \
git=''; \
gitref=''; \
tar=''; \
pkgsdir="$(topsrc)"; \
fi; \
pkgbdir="$(bdir6)/$(1)"; \
pkgcfg="$(call GETVAR,speedo_pkg_w64_$(1)_configure)"; \
tmp="$(speedo_w32_cflags) \
$(call GETVAR,speedo_pkg_$(1)_extracflags)"; \
if [ x$$$$(echo "$$$$tmp" | tr -d '[:space:]')x != xx ]; then \
pkgextracflags="CFLAGS=\"$$$$tmp\""; \
else \
pkgextracflags=; \
fi; \
pkgmkdir="$(call GETVAR,speedo_pkg_$(1)_make_dir)"; \
pkgmkargs="$(call GETVAR,speedo_pkg_$(1)_make_args)"; \
pkgmkargs_inst="$(call GETVAR,speedo_pkg_$(1)_make_args_inst)"; \
pkgmkargs_uninst="$(call GETVAR,speedo_pkg_$(1)_make_args_uninst)"; \
export PKG_CONFIG="/usr/bin/pkg-config"; \
export PKG_CONFIG_PATH="$(idir6)/lib/pkgconfig"; \
[ "$(TARGETOS)" != native ] && export PKG_CONFIG_LIBDIR=""; \
export SYSROOT="$(idir6)"; \
export PATH="$(idir6)/bin:$${PATH}"; \
export LD_LIBRARY_PATH="$(idir6)/lib:$${LD_LIBRARY_PATH}"
endef
# Template for source packages.
# Note that the gnupg package is special: The package source dir is
# the same as the topsrc dir and thus we need to detect the gnupg
# package and cd to that directory. We also test that no in-source build
# has been done. autogen.sh is not run for gnupg.
#
define SPKG_template
$(stampdir)/stamp-$(1)-00-unpack:
@echo "speedo: /*"
@echo "speedo: * $(1)"
@echo "speedo: */"
@(set -e; cd $(sdir); \
$(call SETVARS,$(1)); \
if [ "$(WHAT)" = "this" ]; then \
echo "speedo: using included source"; \
elif [ "$(1)" = "gnupg" ]; then \
cd $$$${pkgsdir}; \
if [ -f config.log ]; then \
echo "GnuPG has already been build in-source" >&2 ;\
echo "Please run \"make distclean\" and retry" >&2 ;\
exit 1 ; \
fi; \
echo "speedo: unpacking gnupg not needed"; \
elif [ -n "$$$${git}" ]; then \
echo "speedo: unpacking $(1) from $$$${git}:$$$${gitref}"; \
git clone -b "$$$${gitref}" "$$$${git}" "$$$${pkg}"; \
cd "$$$${pkg}"; \
AUTOGEN_SH_SILENT=1 ./autogen.sh; \
elif [ -n "$$$${tar}" ]; then \
tar2="$(OVERRIDE_TARBALLS)/$$$$(basename $$$${tar})";\
if [ -f "$$$${tar2}" ]; then \
tar="$$$$tar2"; \
echo "speedo: /*"; \
echo "speedo: * Note: using an override"; \
echo "speedo: */"; \
fi; \
echo "speedo: unpacking $(1) from $$$${tar}"; \
case "$$$${tar}" in \
*.gz) pretar=zcat ;; \
*.bz2) pretar=bzcat ;; \
*.xz) pretar=xzcat ;; \
*) pretar=cat ;; \
esac; \
[ -f tmp.tgz ] && rm tmp.tgz; \
case "$$$${tar}" in \
/*) $$$${pretar} < $$$${tar} | tar xf - ;; \
*) wget -q -O - $$$${tar} | tee tmp.tgz \
| $$$${pretar} | tar x$$$${opt}f - ;; \
esac; \
if [ -f tmp.tgz ]; then \
if [ -n "$$$${sha2}" ]; then \
tmp=$$$$($(SHA2SUM) <tmp.tgz|cut -d' ' -f1);\
if [ "$$$${tmp}" != "$$$${sha2}" ]; then \
echo "speedo:"; \
echo "speedo: ERROR: SHA-256 checksum mismatch for $(1)";\
echo "speedo:"; \
exit 1; \
fi; \
elif [ -n "$$$${sha1}" ]; then \
tmp=$$$$($(SHA1SUM) <tmp.tgz|cut -d' ' -f1);\
if [ "$$$${tmp}" != "$$$${sha1}" ]; then \
echo "speedo:"; \
echo "speedo: ERROR: SHA-1 checksum mismatch for $(1)";\
echo "speedo:"; \
exit 1; \
fi; \
else \
echo "speedo:"; \
echo "speedo: Warning: No checksum known for $(1)";\
echo "speedo:"; \
fi; \
rm tmp.tgz; \
fi; \
base=`echo "$$$${tar}" | sed -e 's,^.*/,,' \
| sed -e 's,\.tar.*$$$$,,'`; \
mv $$$${base} $(1); \
patch="$(patdir)/$(1)-$$$${base#$(1)-}.patch";\
patchx="$(patdir)/$(1).patch"; \
if [ -x "$$$${patch}" ]; then \
echo "speedo: applying patch $$$${patch}"; \
cd $(1); "$$$${patch}"; \
elif [ -x "$$$${patchx}" ]; then \
echo "speedo: applying patch $$$${patchx}";\
cd $(1); "$$$${patchx}"; \
elif [ -f "$$$${patch}" ]; then \
echo "speedo: warning: $$$${patch} is not executable"; \
fi; \
else \
echo "speedo: unpacking $(1) from UNKNOWN"; \
fi)
@touch $(stampdir)/stamp-$(1)-00-unpack
$(stampdir)/stamp-$(1)-01-configure: $(stampdir)/stamp-$(1)-00-unpack
@echo "speedo: configuring $(1)"
ifneq ($(findstring $(1),$(speedo_make_only_style)),)
@echo "speedo: configure run not required"
else ifneq ($(findstring $(1),$(speedo_gnupg_style)),)
@($(call SETVARS,$(1)); \
mkdir "$$$${pkgbdir}"; \
cd "$$$${pkgbdir}"; \
if [ -n "$(speedo_autogen_buildopt)" ]; then \
eval AUTOGEN_SH_SILENT=1 w32root="$(idir)" \
"$$$${pkgsdir}/autogen.sh" \
$(speedo_autogen_buildopt) \
$$$${pkgcfg} $$$${pkgextracflags}; \
else \
eval "$$$${pkgsdir}/configure" \
--silent \
--enable-maintainer-mode \
--prefix="$(idir)" \
$$$${pkgcfg} $$$${pkgextracflags}; \
fi)
else
@($(call SETVARS,$(1)); \
mkdir "$$$${pkgbdir}"; \
cd "$$$${pkgbdir}"; \
eval "$$$${pkgsdir}/configure" \
--silent $(speedo_host_build_option) \
--prefix="$(idir)" \
$$$${pkgcfg} $$$${pkgextracflags}; \
)
endif
@touch $(stampdir)/stamp-$(1)-01-configure
# Note that unpack has no 64 bit version becuase it is just the source.
# Fixme: We should use templates to create the standard and w64
# version of these rules.
$(stampdir)/stamp-w64-$(1)-01-configure: $(stampdir)/stamp-$(1)-00-unpack
@echo "speedo: configuring $(1) (64 bit)"
ifneq ($(findstring $(1),$(speedo_make_only_style)),)
@echo "speedo: configure run not required"
else ifneq ($(findstring $(1),$(speedo_gnupg_style)),)
@($(call SETVARS_W64,$(1)); \
mkdir "$$$${pkgbdir}"; \
cd "$$$${pkgbdir}"; \
if [ -n "$(speedo_autogen_buildopt)" ]; then \
eval AUTOGEN_SH_SILENT=1 w64root="$(idir6)" \
"$$$${pkgsdir}/autogen.sh" \
$(speedo_autogen_buildopt6) \
$$$${pkgcfg} $$$${pkgextracflags}; \
else \
eval "$$$${pkgsdir}/configure" \
--silent \
--enable-maintainer-mode \
--prefix="$(idir6)" \
$$$${pkgcfg} $$$${pkgextracflags}; \
fi)
else
@($(call SETVARS_W64,$(1)); \
mkdir "$$$${pkgbdir}"; \
cd "$$$${pkgbdir}"; \
eval "$$$${pkgsdir}/configure" \
--silent $(speedo_host_build_option6) \
--prefix="$(idir6)" \
$$$${pkgcfg} $$$${pkgextracflags}; \
)
endif
@touch $(stampdir)/stamp-w64-$(1)-01-configure
$(stampdir)/stamp-$(1)-02-make: $(stampdir)/stamp-$(1)-01-configure
@echo "speedo: making $(1)"
ifneq ($(findstring $(1),$(speedo_make_only_style)),)
@($(call SETVARS,$(1)); \
cd "$$$${pkgsdir}"; \
test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \
if test "$$$${pkg}" = zlib -a "$(TARGETOS)" != w32 ; then \
./configure --prefix="$(idir)" ; \
fi ;\
$(MAKE) --no-print-directory $(speedo_makeopt) $$$${pkgmkargs} V=0)
else
@($(call SETVARS,$(1)); \
cd "$$$${pkgbdir}"; \
test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \
$(MAKE) --no-print-directory $(speedo_makeopt) $$$${pkgmkargs} V=0)
endif
@touch $(stampdir)/stamp-$(1)-02-make
$(stampdir)/stamp-w64-$(1)-02-make: $(stampdir)/stamp-w64-$(1)-01-configure
@echo "speedo: making $(1) (64 bit)"
ifneq ($(findstring $(1),$(speedo_make_only_style)),)
@($(call SETVARS_W64,$(1)); \
cd "$$$${pkgsdir}"; \
test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \
$(MAKE) --no-print-directory $(speedo_makeopt) $$$${pkgmkargs} V=0)
else
@($(call SETVARS_W64,$(1)); \
cd "$$$${pkgbdir}"; \
test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \
$(MAKE) --no-print-directory $(speedo_makeopt) $$$${pkgmkargs} V=0)
endif
@touch $(stampdir)/stamp-w64-$(1)-02-make
# Note that post_install must come last because it may be empty and
# "; ;" is a syntax error.
$(stampdir)/stamp-$(1)-03-install: $(stampdir)/stamp-$(1)-02-make
@echo "speedo: installing $(1)"
ifneq ($(findstring $(1),$(speedo_make_only_style)),)
@($(call SETVARS,$(1)); \
cd "$$$${pkgsdir}"; \
test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \
$(MAKE) --no-print-directory $$$${pkgmkargs_inst} install V=0;\
$(call speedo_pkg_$(call FROB_macro,$(1))_post_install))
else
@($(call SETVARS,$(1)); \
cd "$$$${pkgbdir}"; \
test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \
$(MAKE) --no-print-directory $$$${pkgmkargs_inst} install-strip V=0;\
$(call speedo_pkg_$(call FROB_macro,$(1))_post_install))
endif
touch $(stampdir)/stamp-$(1)-03-install
$(stampdir)/stamp-w64-$(1)-03-install: $(stampdir)/stamp-w64-$(1)-02-make
@echo "speedo: installing $(1) (64 bit)"
ifneq ($(findstring $(1),$(speedo_make_only_style)),)
@($(call SETVARS_W64,$(1)); \
cd "$$$${pkgsdir}"; \
test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \
$(MAKE) --no-print-directory $$$${pkgmkargs_inst} install V=0;\
$(call speedo_pkg_$(call FROB_macro,$(1))_post_install))
else
@($(call SETVARS_W64,$(1)); \
cd "$$$${pkgbdir}"; \
test -n "$$$${pkgmkdir}" && cd "$$$${pkgmkdir}"; \
$(MAKE) --no-print-directory $$$${pkgmkargs_inst} install-strip V=0;\
$(call speedo_pkg_$(call FROB_macro,$(1))_post_install))
endif
touch $(stampdir)/stamp-w64-$(1)-03-install
$(stampdir)/stamp-final-$(1): $(stampdir)/stamp-$(1)-03-install
@($(call SETVARS,$(1)); \
printf "%-14s %-12s %s\n" $(1) "$$$${ver}" "$$$${sha1}" \
>> $(bdir)/pkg-versions.txt)
@echo "speedo: $(1) done"
@touch $(stampdir)/stamp-final-$(1)
$(stampdir)/stamp-w64-final-$(1): $(stampdir)/stamp-w64-$(1)-03-install
@echo "speedo: $(1) (64 bit) done"
@touch $(stampdir)/stamp-w64-final-$(1)
.PHONY : clean-$(1)
clean-$(1):
@echo "speedo: uninstalling $(1)"
@($(call SETVARS,$(1)); \
(cd "$$$${pkgbdir}" 2>/dev/null && \
$(MAKE) --no-print-directory \
$$$${pkgmkargs_uninst} uninstall V=0 ) || true;\
if [ "$(1)" = "gnupg" ]; then \
rm -fR "$$$${pkgbdir}" || true ;\
else \
rm -fR "$$$${pkgsdir}" "$$$${pkgbdir}" || true;\
fi)
-rm -f $(stampdir)/stamp-final-$(1) $(stampdir)/stamp-$(1)-*
.PHONY : build-$(1)
build-$(1): $(stampdir)/stamp-final-$(1)
.PHONY : report-$(1)
report-$(1):
@($(call SETVARS,$(1)); \
echo -n $(1):\ ; \
if [ -n "$$$${git}" ]; then \
if [ -e "$$$${pkgsdir}/.git" ]; then \
cd "$$$${pkgsdir}" && \
git describe ; \
else \
echo missing; \
fi \
elif [ -n "$$$${tar}" ]; then \
base=`echo "$$$${tar}" | sed -e 's,^.*/,,' \
| sed -e 's,\.tar.*$$$$,,'`; \
echo $$$${base} ; \
fi)
endef
# Insert the template for each source package.
$(foreach spkg, $(speedo_spkgs), $(eval $(call SPKG_template,$(spkg))))
$(stampdir)/stamp-final: clean-pkg-versions
ifeq ($(TARGETOS),w32)
$(stampdir)/stamp-final: $(addprefix $(stampdir)/stamp-w64-final-,$(speedo_w64_build_list))
endif
$(stampdir)/stamp-final: $(addprefix $(stampdir)/stamp-final-,$(speedo_build_list))
touch $(stampdir)/stamp-final
clean-pkg-versions:
@: >$(bdir)/pkg-versions.txt
all-speedo: $(stampdir)/stamp-final
report-speedo: $(addprefix report-,$(speedo_build_list))
# Just to check if we catched all stamps.
clean-stamps:
$(RM) -fR $(stampdir)
clean-speedo:
$(RM) -fR PLAY
#
# Windows installer
#
# {{{
ifeq ($(TARGETOS),w32)
dist-source: installer
for i in 00 01 02 03; do sleep 1;touch PLAY/stamps/stamp-*-${i}-*;done
(set -e;\
tarname="$(INST_NAME)-$(INST_VERSION)_$(BUILD_DATESTR).tar" ;\
[ -f "$$tarname" ] && rm "$$tarname" ;\
tar -C $(topsrc) -cf "$$tarname" --exclude-backups --exclude-vcs \
--transform='s,^\./,$(INST_NAME)-$(INST_VERSION)/,' \
--anchored --exclude './PLAY' . ;\
tar --totals -rf "$$tarname" --exclude-backups --exclude-vcs \
--transform='s,^,$(INST_NAME)-$(INST_VERSION)/,' \
PLAY/stamps/stamp-*-00-unpack PLAY/src swdb.lst swdb.lst.sig ;\
[ -f "$$tarname".xz ] && rm "$$tarname".xz;\
xz -T0 "$$tarname" ;\
)
# Extract the two latest news entries. */
$(bdir)/NEWS.tmp: $(topsrc)/NEWS
awk '/^Notewo/ {if(okay>1){exit}; okay++};okay {print $0}' \
<$(topsrc)/NEWS >$(bdir)/NEWS.tmp
# Sort the file with the package versions.
$(bdir)/pkg-versions.sorted: $(bdir)/pkg-versions.txt
grep -v '^gnupg ' <$(bdir)/pkg-versions.txt \
| sort | uniq >$(bdir)/pkg-versions.sorted
$(bdir)/README.txt: $(bdir)/NEWS.tmp $(topsrc)/README $(w32src)/README.txt \
$(w32src)/pkg-copyright.txt $(bdir)/pkg-versions.sorted
sed -e '/^;.*/d;' \
-e '/!NEWSFILE!/{r $(bdir)/NEWS.tmp' -e 'd;}' \
-e '/!GNUPGREADME!/{r $(topsrc)/README' -e 'd;}' \
-e '/!PKG-COPYRIGHT!/{r $(w32src)/pkg-copyright.txt' -e 'd;}' \
-e '/!PKG-VERSIONS!/{r $(bdir)/pkg-versions.sorted' -e 'd;}' \
-e 's,!VERSION!,$(INST_VERSION),g' \
< $(w32src)/README.txt \
| sed -e '/^#/d' \
| awk '{printf "%s\r\n", $$0}' >$(bdir)/README.txt
$(bdir)/g4wihelp.dll: $(w32src)/g4wihelp.c $(w32src)/exdll.h $(w32src)/exdll.c
(set -e; cd $(bdir); \
$(W32CC) -DUNICODE -static-libgcc -I . -O2 -c \
-o exdll.o $(w32src)/exdll.c; \
$(W32CC) -DUNICODE -static-libgcc -I. -shared -O2 \
-o g4wihelp.dll $(w32src)/g4wihelp.c exdll.o \
-lwinmm -lgdi32 -luserenv \
-lshell32 -loleaut32 -lshlwapi -lmsimg32; \
$(STRIP) g4wihelp.dll)
w32_insthelpers: $(bdir)/g4wihelp.dll
$(bdir)/inst-options.ini: $(w32src)/inst-options.ini
cat $(w32src)/inst-options.ini >$(bdir)/inst-options.ini
extra_installer_options =
ifeq ($(WITH_GUI),1)
extra_installer_options += -DWITH_GUI=1
endif
# Note that we sign only when doing the final installer.
installer: all w32_insthelpers $(w32src)/inst-options.ini $(bdir)/README.txt
(set -e;\
cd "$(idir)"; \
if echo "$(idir)" | grep -q '/PLAY-release/' ; then \
for f in $(AUTHENTICODE_FILES); do \
if [ -f "bin/$$f" ]; then \
$(call AUTHENTICODE_sign,"bin/$$f","bin/$$f");\
elif [ -f "libexec/$$f" ]; then \
$(call AUTHENTICODE_sign,"libexec/$$f","libexec/$$f");\
else \
echo "speedo: WARNING: file '$$f' not available for signing";\
fi;\
done; \
fi \
)
$(MAKENSIS) -V2 \
-DINST_DIR=$(idir) \
-DINST6_DIR=$(idir6) \
-DBUILD_DIR=$(bdir) \
-DTOP_SRCDIR=$(topsrc) \
-DW32_SRCDIR=$(w32src) \
-DBUILD_ISODATE=$(BUILD_ISODATE) \
-DBUILD_DATESTR=$(BUILD_DATESTR) \
-DNAME=$(INST_NAME) \
-DVERSION=$(INST_VERSION) \
-DPROD_VERSION=$(INST_PROD_VERSION) \
$(extra_installer_options) $(w32src)/inst.nsi
@echo "Ready: $(idir)/$(INST_NAME)-$(INST_VERSION)_$(BUILD_DATESTR).exe"
# We use the installer target to ensure everything is done and signed
wixlib: installer $(bdir)/README.txt $(w32src)/wixlib.wxs
if [ -z "$$(which $(WINE))" ]; then \
echo "ERROR: For the w32-wixlib wine needs to be installed."; \
echo "ERROR: see 'help-w32-wixlib'"; \
exit 1; \
fi;
if [ ! -d "$(WIXPREFIX)" ]; then \
echo "ERROR: You must set WIXPREFIX to an installation of wixtools."; \
echo "ERROR: see 'help-w32-wixlib'"; \
exit 1; \
fi;
(if [ -z "$$WINEPREFIX" ]; then \
WINEPREFIX="$$HOME/.wine"; \
if [ ! -e "$$WINEPREFIX/dosdevices" ]; then \
echo "ERROR: No wine prefix found under $$WINEPREFIX"; \
exit 1; \
fi; \
fi; \
WINEINST=$$WINEPREFIX/dosdevices/k:; \
WINESRC=$$WINEPREFIX/dosdevices/i:; \
WINEBUILD=$$WINEPREFIX/dosdevices/j:; \
if [ -e "$$WINEINST" ]; then \
echo "ERROR: $$WINEINST already exists. Please remove."; \
exit 1; \
fi; \
if [ -e "$$WINESRC" ]; then \
echo "ERROR: $$WINESRC already exists. Please remove."; \
exit 1; \
fi; \
if [ -e "$$WINEBUILD" ]; then \
echo "ERROR: $$WINEBUILD already exists. Please remove."; \
exit 1; \
fi; \
echo "$(INST_NAME)" > $(bdir)/VERSION; \
echo "$(INST_VERSION)" >> $(bdir)/VERSION; \
MSI_VERSION=$$(echo $(INST_VERSION) | tr -s \\-beta .); \
(ln -s $(idir) $$WINEINST; \
ln -s $(w32src) $$WINESRC; \
ln -s $(bdir) $$WINEBUILD; \
$(WINE) $(WIXPREFIX)/candle.exe \
-dSourceDir=k: \
-dBuildDir=j: \
-dVersion=$$MSI_VERSION \
-out k:\\$(INST_NAME).wixobj \
-pedantic -wx i:\\wixlib.wxs ;\
$(WINE) $(WIXPREFIX)/lit.exe \
-out k:\\$(INST_NAME)-$(INST_VERSION)_$(BUILD_DATESTR).wixlib \
-bf \
-wx \
-pedantic \
k:\\$(INST_NAME).wixobj \
); \
(rm $$WINEINST; rm $$WINESRC; rm $$WINEBUILD;) \
)
define MKSWDB_commands
( pref="#+macro: gnupg22_w32_$(3)" ;\
echo "$${pref}ver $(INST_VERSION)_$(BUILD_DATESTR)" ;\
echo "$${pref}date $(2)" ;\
echo "$${pref}size $$(wc -c <$(1)|awk '{print int($$1/1024)}')k";\
echo "$${pref}sha1 $$(sha1sum <$(1)|cut -d' ' -f1)" ;\
echo "$${pref}sha2 $$(sha256sum <$(1)|cut -d' ' -f1)" ;\
) | tee $(1).swdb
endef
# Sign the file $1 and save the result as $2
define AUTHENTICODE_sign
set -e;\
if [ -n "$(AUTHENTICODE_SIGNHOST)" ]; then \
echo "speedo: Signing via host $(AUTHENTICODE_SIGNHOST)";\
scp $(1) "$(AUTHENTICODE_SIGNHOST):a.exe" ;\
ssh "$(AUTHENTICODE_SIGNHOST)" '$(AUTHENTICODE_TOOL)' sign \
/a /n '"g10 Code GmbH"' \
/tr 'http://rfc3161timestamp.globalsign.com/advanced' /td sha256 \
/fd sha256 /du https://gnupg.org a.exe ;\
scp "$(AUTHENTICODE_SIGNHOST):a.exe" $(2);\
echo "speedo: signed file is '$(2)'" ;\
elif [ "$(AUTHENTICODE_KEY)" = card ]; then \
echo "speedo: Signing using a card";\
$(OSSLSIGNCODE) sign \
-pkcs11engine $(OSSLPKCS11ENGINE) \
-pkcs11module $(SCUTEMODULE) \
-certs $(AUTHENTICODE_CERTS) \
-h sha256 -n GnuPG -i https://gnupg.org \
-ts http://rfc3161timestamp.globalsign.com/advanced \
-in $(1) -out $(2).tmp ; mv $(2).tmp $(2) ; \
elif [ -e "$(AUTHENTICODE_KEY)" ]; then \
echo "speedo: Signing using key $(AUTHENTICODE_KEY)";\
osslsigncode sign -certs $(AUTHENTICODE_CERTS) \
-pkcs12 $(AUTHENTICODE_KEY) -askpass \
-ts "http://timestamp.globalsign.com/scripts/timstamp.dll" \
-h sha256 -n GnuPG -i https://gnupg.org \
-in $(1) -out $(2) ;\
else \
echo "speedo: WARNING: Binaries are not signed"; \
fi
endef
# Help target for testing to sign a file.
# Usage: make -f speedo.mk test-authenticode-sign TARGETOS=w32 FILE=foo.exe
test-authenticode-sign:
(set -e; \
echo "Test signining of $(FILE)" ; \
$(call AUTHENTICODE_sign,"$(FILE)","$(FILE)");\
)
# Build the installer from the source tarball.
installer-from-source: dist-source
(set -e;\
[ -d PLAY-release ] && rm -rf PLAY-release; \
mkdir PLAY-release;\
cd PLAY-release; \
tar xJf "../$(INST_NAME)-$(INST_VERSION)_$(BUILD_DATESTR).tar.xz";\
cd $(INST_NAME)-$(INST_VERSION); \
$(MAKE) -f build-aux/speedo.mk this-w32-installer SELFCHECK=0;\
if [ -d "$(WIXPREFIX)" ]; then \
$(MAKE) -f build-aux/speedo.mk this-w32-wixlib SELFCHECK=0;\
fi; \
reldate="$$(date -u +%Y-%m-%d)" ;\
exefile="$(INST_NAME)-$(INST_VERSION)_$(BUILD_DATESTR).exe" ;\
cp "PLAY/inst/$$exefile" ../.. ;\
exefile="../../$$exefile" ;\
$(call MKSWDB_commands,$${exefile},$${reldate}); \
msifile="$(INST_NAME)-$(INST_VERSION)_$(BUILD_DATESTR).wixlib"; \
if [ -e "PLAY/inst/$${msifile}" ]; then \
cp "PLAY/inst/$$msifile" ../..; \
msifile="../../$$msifile" ; \
$(call MKSWDB_commands,$${msifile},$${reldate},"wixlib_"); \
fi \
)
# This target repeats some of the installer-from-source steps but it
# is intended to be called interactively, so that the passphrase can be
# entered.
sign-installer:
@(set -e; \
cd PLAY-release; \
cd $(INST_NAME)-$(INST_VERSION); \
reldate="$$(date -u +%Y-%m-%d)" ;\
exefile="$(INST_NAME)-$(INST_VERSION)_$(BUILD_DATESTR).exe" ;\
msifile="$(INST_NAME)-$(INST_VERSION)_$(BUILD_DATESTR).wixlib" ;\
echo "speedo: /*" ;\
echo "speedo: * Signing installer" ;\
echo "speedo: */" ;\
$(call AUTHENTICODE_sign,"PLAY/inst/$$exefile","../../$$exefile");\
exefile="../../$$exefile" ;\
msifile="../../$$msifile" ;\
$(call MKSWDB_commands,$${exefile},$${reldate}); \
if [ -e "$${msifile}" ]; then \
$(call MKSWDB_commands,$${msifile},$${reldate},"wixlib_"); \
fi; \
echo "speedo: /* (osslsigncode verify disabled) */" ;\
echo osslsigncode verify $${exefile} \
)
endif
# }}} W32
#
# Check availibility of standard tools and prepare everything.
#
check-tools: $(stampdir)/stamp-directories
#
# Mark phony targets
#
.PHONY: all all-speedo report-speedo clean-stamps clean-speedo installer \
w32_insthelpers check-tools clean-pkg-versions