* agent/command.c (server_local_s): Add fields 'greeting_seen' and
'connect_from_self'.
(io_monitor): Do not log connections from self.
(start_command_handler): Set flag 'connect_from_self'.
* agent/gpg-agent.c (check_own_socket_thread): Disable logging.
(do_start_connection_thread): Do not log conection start and
termination if IPC debugging is enabled.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (sserver_local_s): Change flags to use only one bit.
(option_handler): Make an atoi return 1 or 0.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp.c (my_log_monitor): New var.
(my_libassuan_log_handler): Run that monitor.
(setup_libassuan_logging): Add arg to set a log monitor and change all
callers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.
--
Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand. Use symbolic
representations instead of numeric for better readability.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/command-ssh.c (sexp_key_construct): Lowercase the algo name.
--
We need to use a lowercase version of the algo in S-expression.
Unfortunately Libgcrypt has no function for this, thus we need to
malloc and first.
Fixes-commit: ebf24e3
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/init.c (init_common_subsystems): Initialize libgcrypt.
* dirmngr/Makefile.am (dirmngr_ldap): Link with libgcrypt.
--
Most other modules already call gcry_check_version() after
init_common_subsystems() so may as well move initialization of libgcrypt
to here. Also fixes a warning in the system log from gpgconf --homedir.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
* agent/command-ssh.c (ssh_handler_request_identities): Skip a key with
error, not giving up to handle the request itself.
* agent/cvt-openpgp.c (extract_private_key): Support "ecdsa" key.
--
Note that "ecdsa" key is still in use by old versions of gpg-agent
through its SSH handling (until 2.1.14). With old versions of
gpg-agent, adding ECDSA key by ssh-add command, "ecdsa" key will be
created. So, "ecdsa" key should be supported.
For g10/gpg, "ecdsa" and "ecdh" was only used in some experimental
versions of libgcrypt, with parameters. We now use "ecc" for all cases
in released versions.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/util.h (get_pk_algo_from_key): New.
* common/sexputil.c (get_pk_algo_from_key): The implementation.
* agent/gpg-agent.c: Remove include of openpgpdefs.h.
* agent/command-ssh.c (struct ssh_key_type_spec): Use integer ALGO.
(ssh_key_types): Update with GCRY_PK_*.
(make_cstring, sexp_extract_identifier): Remove.
(sexp_key_construct): Use gcry_pk_algo_name to get ALGO string.
(ssh_key_to_blob): Use cadr to get value list.
(ssh_key_type_lookup): Lookup with integer ALGO.
(ssh_receive_key): Follow the change of ssh_key_type_lookup.
(ssh_send_key_public): Likewise. Use get_pk_algo_from_key to get ALGO.
--
This fixes the regresson introduced by the commit
894789c329.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/gpg-agent.c (get_agent_active_connection_count): New.
(do_start_connection_thread, start_connection_thread_ssh): Bump
ACTIVE_CONNECTIONS up and down.
* agent/command.c (cmd_getinfo): Add subcommand "connections".
--
The variable ACTIVE_CONNECTIONS is used to shutdown gpg-agent in a
friendly way. Before we switched to nPth a Pth provided count of
threads was used for this. During the migration to nPth
ACTIVE_CONNECTIONS was introduced and checked but never set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/command-ssh.c (ssh_identity_register): Add a key to sshcontrol
even if it is already in the private key store.
* tests/openpgp/ssh.scm: Test this.
GnuPG-bug-id: 2316
Signed-off-by: Justus Winter <justus@g10code.com>
CACHE_MODE_ANY is supposed to match any cache mode except
CACHE_MODE_IGNORE, but the code used '==' to compare cache modes.
* agent/cache.c (cache_mode_equal): New function.
(agent_set_cache): Use the new function to compare cache modes.
(agent_get_cache): Likewise.
* tests/openpgp/Makefile.am (TESTS): Add new test.
* tests/openpgp/issue2015.scm: New file.
GnuPG-bug-id: 2015
Signed-off-by: Justus Winter <justus@g10code.com>
* agent/protect.c (OCB_MODE_SUPPORTED): Remove macro.
(do_encryption): Always support OCB.
(do_decryption): Ditto.
(agent_unprotect): Ditto.
* dirmngr/server.c (is_tor_running): Unconditionally build this.
--
Although not technically required, it is easier to require them to
avoid bug reports due to too old library versions.
Signed-off-by: Werner Koch <wk@gnupg.org>
agent/command.c (cmd_updatestartuptty): Use session_env_list_stdenvnames
to get the list.
--
Debian-bug-id: 801247
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/name-value.c (struct name_value_container): Add field
'private_key_mode'.
(my_error): New. Use instead of gpg_error.
(nvc_new_private_key): New.
(nve_release): Add arg 'private_key_mode'.
(nvc_release): Call nve_release with private_key_mode flag.
(nvc_delete): Ditto.
(_nvc_add): Do no special case "Key:" in non-private_key_mode.
(nvc_get_private_key): Return error in non-private_key_mode.
(nvc_set_private_key): Ditto.
(nvc_parse): Factor all code out to ...
(do_nvc_parse): new. Add arg 'for_private_key'.
(nvc_parse_private_key): New.
* agent/findkey.c (write_extended_private_key): Replace nvc_parse by
nvc_parse_private_key.
(read_key_file): Ditto.
* common/t-name-value.c (private_key_mode): New variable.
(my_nvc_new): New. Replace all callers.
(test_key_extraction): Take mode in account.
(run_tests): Ditto.
(run_modification_tests): Ditto.
(parse): Ditto.
(main): Add option --parse and rename --parse to --parse-key.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/name-value.c, common/name-value.h: Rename symbol prefixes
from "pkc_" to "nvc_" and from "pke_" to "nve_". Change all callers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/private-keys.c: Rename to name-value.c.
* common/private-keys.h: Rename to name-value.h. Chage all users.
* common/t-private-keys.c: Rename to t-name-value.c.
* common/Makefile.am: Adjust accordingly.
--
The module is cool enough to be used for other purposes as well. Thus
we better change the name.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c, g10/call-agent.h (agent_export_key): Add
openpgp_protected flag.
* g10/export.c (receive_seckey_from_agent): Request openpgp_protected
secret keys from agent.
* agent/command.c (hlp_export_key): EXPORT_KEY help text: add a
brief description of the effect of --openpgp.
--
The --openpgp flag for gpg-agent's EXPORT_KEY actually forces
encryption in a certain (RFC 4880-compatible format). This changeset
exposes that functionality in internal functions, and clarifies
functionality in the agent's help text.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/gpg-agent.c (create_server_socket): Call chmod before listen.
* scd/scdaemon.c (create_server_socket): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
--
This is just in case of a improperly set umask. Note that a connect
requires a write permissions.
* common/homedir.c: Include sys/stat.h and zb32.h.
(w32_portable_app, w32_bin_is_bin): Change type from int to byte.
(non_default_homedir): New.
(is_gnupg_default_homedir): New.
(default_homedir): Set non_default_homedir.
(gnupg_set_homedir): Set non_default_homedir and make
the_gnupg_homedir and absolute directory name.
(gnupg_homedir): Return an absolute directory name.
(_gnupg_socketdir_internal): New.
(gnupg_socketdir): Implement /run/user/ based sockets.
* tools/gpg-connect-agent.c (get_var_ext): Replace now obsolete
make_filename by xstrdup.
* tools/gpgconf.c (main): Sue gnupg_homedir for the "homedir:" output.
--
If a [/var]/run/user/$(id -u)/ directory exists, a gnupg subdir is
created as needed and the permissions of the directories are checked.
If that all matches that directory name is returned instead of the
homedir.
To cope with non standard homedirs (via GNUPGHOME or --homedir) the
SHA-1 hash of the homedir is computed, left truncated to 120 bits,
zBase-32 encoded, prefixed with "d.", and appended to
"[/var]/run/user/$(id -u)/gnupg/". If that directory exists and has
proper permissions it is returned as socket dir - if not the homedir
is used. Due to cleanup issues, this directory will not be
auto-created but needs to be created by the user in advance.
The required permissions are: directory owned by the user, group and
others bits not set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (remove_socket): Do not remove the enclosing
directory.
* scd/scdaemon.c (cleanup): Ditto.
--
The socket directory is now below /run or at ~/.gnupg. Thus we should
not try to remove the directory of the socket. The auto-removal was
introduced at a time we used a temporary directory for the sockets.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_genkey): Add option --passwd-nonce.
(cmd_passwd): Return a PASSWD_NONCE in verify mode.
* g10/call-agent.c (agent_genkey): Add arg 'passwd_nonce_addr' and do
not send a RESET if given.
(agent_passwd): Add arg 'verify'.
* g10/keygen.c (common_gen): Add optional arg 'passwd_nonce_addr'.
(gen_elg, gen_dsa, gen_ecc, gen_rsa, do_create): Ditto.
(generate_subkeypair): Use sepeare hexgrip var for the to be created
for hexgrip feature. Verify primary key first. Make use of the
passwd nonce. Allow for a static passphrase.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_delete_key): Make the --force option depend on
--disallow-loopback-passphrase.
* g10/call-agent.c (agent_delete_key): Add arg FORCE.
* g10/delkey.c (do_delete_key): Pass opt.answer_yes to
agent_delete_key.
--
Unless the agent has been configured with
--disallow-loopback-passpharse an unattended deletion of a secret key
is now possible with gpg by using --batch _and_ --yes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oNoAllowLoopbackPinentry): New.
(opts): Add --no-allow-loopback-pinentry. Hide
description of --allow-loopback-pinentry.
(parse_rereadable_options): Set opt.allow_loopback_pinentry by
default.
(main): Replace allow-loopback-pinentry by no-allow-loopback-pinentry
in the gpgconf list.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Ditto.
--
Given that a user can anyway change that options in the gpg-agent.conf
file and that gpg needs to be invoked with --pinentry-mode=loopback
the former default does not make much sense - in that option is useful
at all. There was a discussion of this topic on gnupg-devel in April
without a clear result. So we try this new default and just in case
real problems are found for the majority of installations, we can
revert that. The new default is also aligned with GnuPG's policy to
make its use easier and only require users with very high security
standards to tweak certain options (those users have anyway modeled
their threat model and configured their software according to this).
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/findkey.c (write_extended_private_key): New function.
(agent_write_private_key): Detect if an existing file is in extended
format and update the key within if it is.
(read_key_file): Handle the new format.
* agent/keyformat.txt: Document the new format.
* common/Makefile.am: Add the new files.
* common/private-keys.c: New file.
* common/private-keys.h: Likewise.
* common/t-private-keys.c: Likewise.
* common/util.h (alphap, alnump): New macros.
* tests/migrations: Add test demonstrating that we can cope with the
new format.
--
GnuPG 2.3+ will use a new format to store private keys that is both
more flexible and easier to read and edit by human beings. The new
format stores name,value-pairs using the common mail and http header
convention.
This patch adds the parser and support code and prepares GnuPG 2.1 for
the new format.
Signed-off-by: Justus Winter <justus@g10code.com>
* agent/gpg-agent.c (create_private_keys_directory): Set permissions.
* common/sysutils.c (modestr_to_mode): New function.
(gnupg_mkdir): Use new function.
(gnupg_chmod): New function.
* common/sysutils.h (gnupg_chmod): New prototype.
* tests/migrations/from-classic.test: Test migration with existing
directory.
GnuPG-bug-id: 2312
Signed-off-by: Justus Winter <justus@g10code.com>
* agent/protect.c (do_encryption): Fix CBC hashing.
--
The buggy code included an extra closing parenthesis before
the (protected-at) term in the CBC hashing. We now do it by
explicitly hashing the protected stuff and append the rest of the
expression instead of a fixed closing parenthesis. Note that the OCB
hashing only differs that it does no include the protected part.
Fixes-commit: 4159567f7e
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/protect-tool.c (read_and_unprotect): Add arg ctrl and pass to
agent_unprotect.
(main): Allocate a simple CTRL object and pass it to
read_and_unprotect.
(convert_from_openpgp_native): Remove stub.
(agent_key_available, agent_get_cache): New stubs.
(agent_askpin): New emulation for the one in call-pinentry.c.
(agent_write_private_key): New to dump key.
* agent/Makefile.am (gpg_protect_tool_SOURCES): Add cvt-openpgp.c
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/protect.c (agent_protect): Add arg use_ocb. Change all caller
to pass -1 for default.
* agent/protect-tool.c: New option --debug-use-ocb.
(oDebugUseOCB): New.
(opt_debug_use_ocb): New.
(main): Set option.
(read_and_protect): Implement option.
* agent/protect.c (OCB_MODE_SUPPORTED): New macro.
(PROT_DEFAULT_TO_OCB): New macro.
(do_encryption): Add args use_ocb, hashbegin, hashlen, timestamp_exp,
and timestamp_exp_len. Implement OCB.
(agent_protect): Change to support OCB.
(do_decryption): Add new args is_ocb, aadhole_begin, and aadhole_len.
Implement OCB.
(merge_lists): Allow NULL for sha1hash.
(agent_unprotect): Change to support OCB.
(agent_private_key_type): Remove debug output.
--
Instead of using the old OpenPGP way of appending a hash of the
plaintext and encrypt that along with the plaintext, the new scheme
uses a proper authenticated encryption mode. See keyformat.txt for a
description. Libgcrypt 1.7 is required.
This mode is not yet enabled because there would be no way to return
to an older GnuPG version. To test the new scheme use
gpg-protect-tool:
./gpg-protect-tool -av -P abc -p --debug-use-ocb <plain.key >prot.key
./gpg-protect-tool -av -P abc -u <prot.key
Any key from the private key storage should work.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (SPEC_FLAG_WITH_CERT): New.
(ssh_key_types): Add OpenSSH cert types.
(stream_read_string): Allow a dummy read.
(ssh_receive_mpint_list): Pass SPEC by reference.
(ssh_receive_mpint_list): New arg CERT and use it.
(ssh_receive_key): Read certificate into an estream object and modify
parser to make use of that object.
--
This is a first step to support certificate via the agent. The only
effect of this change is the removal of an error message parsing the
certificate. Note that ssh-add sends the private key anyway first and
only then follows with the certificate+private key.
What we need to implement next is a way to store the certificate in
the agent and return it on request.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/pksign.c (agent_pksign_do): Use S-exp of public key, instead
of shadowed key.
--
Reported-by: Justus Winter
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/cvt-openpgp.c (convert_from_openpgp_main): Add an option not
to check existing key.
(convert_from_openpgp): Ditto.
(convert_from_openpgp_native): Call convert_from_openpgp_main with
dontcare_exist=0.
* agent/command.c (cmd_import_key): Call with dontcare_exist=force.
* common/stringhelp.c (utf8_charcount): Take additional parameter,
len. Process at most LEN bytes.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* agent/trustlist.c (istrusted_internal): Initialize 'err'.
--
There is a plausible path of execution so that a branch condition uses
the uninitialized value.
Found using the Clang Static Analyzer.
Signed-off-by: Justus Winter <justus@g10code.com>
* agent/pksign.c (agent_pksign_do): Use public key smartcard.
--
Since gcry_pk_verify can't handle shadowed private key, public
key SEXP should be prepared for smartcard.
* agent/genkey.c (agent_ask_new_passphrase): Use a separate malloc for
PI2. Check return value of the malloc function.
* agent/command-ssh.c (ssh_identity_register): Use a separate malloc
for PI2. Wipe PI2.
--
For whatever stupid reasons I once allocated only one memory area and
split that into PI and PI2. This is actually a common pattern with
malloc but here we used a made up object size and do not take the
extra alignment required into account. One of these not yet hit by
a (sig)bus PC/VAX hacker bugs.
Instead of trying to fix the alignment, it is better to use a second
calloc for the second struct.
GnuPG-bug-id: 2112
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (do_sign): Let verify signature by gpg-agent.
* agent/pksign.c (agent_pksign_do): Call gcry_pk_verify for RSA.
--
RSA signature verification should be done to prevent attacks against
RSA CRT implementations and not to return invalid signature to
adversary. Newer libgcrypt does so. For older libgcrypt and
smartcards, gpg-agent does signature verification.
* agent/cvt-openpgp.c (convert_from_openpgp_main): Only encrypted
parameters are stored as opaque.
(apply_protection): ARRAY members are all normal, non-opaque MPI.
(extract_private_key): Get public key as normal, non-opaque MPI.
Remove support of ECC key with '(flags param)'.
Remove support of "ecdsa" and "ecdh" keys of our experiment.
* agent/command.c (cmd_get_passphrase): Don't repeat passphrase for
pinentry loopback mode.
* agent/genkey.c (check_passphrase_constraints): Immediately return when
pinentry mode is loopback.
--
Fixes endless loop when inquiring a passphrase with
pinentry-mode=loopback that may not satisfy passphrase contraints.
* agent/cvt-openpgp.c (get_keygrip): Handle Curve25519.
(convert_secret_key, convert_transfer_key): Ditto.
* common/openpgp-oid.c (oidtable): Add Curve25519.
(oid_crv25519, openpgp_oid_is_crv25519): New.
* common/util.h (openpgp_oid_is_crv25519): New.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Handle the case
with Montgomery curve which uses x-only coordinate.
* g10/keygen.c (gen_ecc): Handle Curve25519.
(ask_curve): Change the API and second arg is to return subkey algo.
(generate_keypair, generate_subkeypair): Follow chage of ask_curve.
* g10/keyid.c (keygrip_from_pk): Handle Curve25519.
* g10/pkglue.c (pk_encrypt): Handle Curve25519.
* g10/pubkey-enc.c (get_it): Handle the case with Montgomery curve.
* scd/app-openpgp.c (ECC_FLAG_DJB_TWEAK): New.
(send_key_attr): Work with general ECC, Ed25519, and Curve25519.
(get_public_key): Likewise.
(ecc_writekey): Handle flag_djb_tweak.
--
When libgcrypt has Curve25519, GnuPG now supports Curve25519.
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
* agent/gpg-agent.c (main): Unset INSIDE_EMACS envvar.
--
The variable is set only temporarily when gpg is called from Emacs,
keeping it during the session makes no sense.
Signed-off-by: Daiki Ueno <ueno@gnu.org>
* agent/agent.h (LunderscorePROTO): New.
* common/util.h (GNUPG_GCC_ATTR_FORMAT_ARG): New.
* common/i18n.h (GNUPG_GCC_ATTR_FORMAT_ARG): New. Use for
i18n_localegettext. Expand LunderscorePROTO.
* agent/genkey.c (check_passphrase_constraints): Use xtryasprintf
again to keep the old translations.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* po/Makevars (XGETTEXT_OPTIONS): Add keyword "L_".
* common/i18n.c (i18n_localegettext): New stub.
* common/i18n.h: Expand the LunderscoreIMPL macro.
* agent/agent.h (L_): New.
(LunderscoreIMPL): New.
* agent/call-pinentry.c (setup_qualitybar): Add arg ctrl anc change
caller.
* agent/findkey.c (try_unprotect_cb): Add local var ctrl.
* agent/genkey.c (check_passphrase_constraints): Replace xtryasprintf
by xtrystrdup to avoid gcc warning. Unfortinately this changes the
string.
(agent_ask_new_passphrase): Cleanup the use of initial_errtext.
--
Static strings in gpg-agent need to be translated according to the
locale set by the caller. This is required so that a gpg-agent can be
started in one locale and a gpg can be run in another. If we don't do
this the static strings (prompt, buttons) are not or in the wrong
locale translated while dynamic strings (e.g. key description) uses
the locale of gpg.
This is only the first part of the change the actual local switching
still needs to be implemented.
Debian-bug-id: 788983
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (create_server_socket): Add arg "cygwin". Call
assuan_sock_set_flag if Assuan version is recent enough.
(main): Create ssh server socket with Cygwin flag set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (check_passphrase_constraints): Add parameter
failed_constraint and remove parameter silent. Update callers.
* agent/genkey.c (check_passphrase_constraints): Add parameter
failed_constraint and remove parameter silent. If FAILED_CONSTRAINT
is not NULL and OPT.ENFORCE_PASSPHRASE_CONSTRAINTS is FALSE, save the
error text in *FAILED_CONSTRAINT and don't call take_this_one_anyway
or take_this_one_anyway2. If FAILED_CONSTRAINT is NULL, act as if
SILENT was set.
(agent_ask_new_passphrase): Change initial_errtext's type from a const
char * to a char *. Pass it to check_passphrase_constraints. If it
contains malloc's memory, free it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Based on a patch provided by Watson Yuuma Sato <yuuma.sato@gmail.com>
in issue 2018.
* agent/gpg-agent.c (finalize_rereadable_options): Don't raise
max-cache-ttl to default-cache-ttl. Likewise for max-cache-ttl-ssh
and default-cache-ttl-ssh.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
This closes issue #2009.
* agent/agent.h (opt): Remove field ssh_support.
* agent/gpg-agent.c (ssh_support): New. Replace all opt.ssh_support
by this.
(main): Do not set ssh_support along with setting putty_support.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/g13.c: Make use of debug_parse_flag.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto
* agent/gpg-agent.c: Ditto. But do not terminate on "help"
* dirmngr/dirmngr.c: Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (start_connection_thread): Rename to ...
(do_start_connection_thread): this. Factor nonce checking out to ...
(start_connection_thread_std): this,
(start_connection_thread_extra): this,
(start_connection_thread_browser): and this.
--
Although not tested, the code did not worked on Windows becuase we
were checning the wrong nonce.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Add field "browser_socket".
* agent/command.c (cmd_setkeydesc): Use a different message for
restricted==2.
* agent/gpg-agent.c (oBrowserSocket): New.
(opts): Add --browser-socket.
(socket_name_browser, redir_socket_name_browser): New.
(socket_nonce_browser): New.
(cleanup): Cleanup browser socket.
(main): Implement option.
(start_connection_thread_browser): New.
(handle_connections): Add arg listen_fd_browser and use it.
--
This is very similar to --extra-socket but intended to be used by a web
browser session. AS of now it only displays a different "Note: in
the Pinentry than --extra-socket but it may eventually be tweaked for
the use by browser extensions making use of gpg-agent.
It is marked experimental and and thus may be removed in later
versions.
To better support the different "client classes", it would be useful
to add corresponsing cache classes so that each class has its own
cache.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Add field allow_emacs_pinentry.
* agent/call-pinentry.c (start_pinentry): Act upon new var.
* agent/gpg-agent.c (oAllowEmacsPinentry): New.
(opts): Add option --allow-emacs-pinentry.
(parse_rereadable_options): Set this option.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add new option.
--
gpgconf-comp and manual entry added by wk.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_getinfo): Add new sub-command.
--
The current output is:
> getinfo std_env_names
D GPG_TTY
D TERM
D DISPLAY
D XAUTHORITY
D XMODIFIERS
D GTK_IM_MODULE
D QT_IM_MODULE
D PINENTRY_USER_DATA
OK
Note that there is an invisible \x00 at the end of each line.
* agent/command.c (cmd_get_passphrase): Read from the user cache.
--
We used to read the passphrase with mode CACHE_MODE_NORMAL but we put
it into the cache with CACHE_MODE_USER. However, agent_get_cache does
not yet distinguish between them and thus this does not change
anything.
* agent/agent.h (agent_get_passphrase): Add arguments keyinfo and
cache_mode. Update callers.
* agent/call-pinentry.c (agent_get_passphrase): Add arguments keyinfo
and cache_mode. If KEYINFO and CACHE_MODE describe a cachable key,
then send SETKEYINFO to the pinentry.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* agent/agent.h (opt): Add field allow_external_cache.
* agent/call-pinentry.c (start_pinentry): Act upon new var.
* agent/gpg-agent.c (oNoAllowExternalCache): New.
(opts): Add option --no-allow-external-cache.
(parse_rereadable_options): Set this option.
--
Pinentry 0.9.2 may be build with libsecret support and thus an extra
checkbox is displayed to allow the user to get passwords out of an
libsecret maintained cache. Security aware user may want to avoid
this feature and may do this at runtime by enabling this option.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (start_pinentry): Add more strings.
--
We do this so that translations of these strings will be available at
the time a pinentry implements features which require these strings.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oDebugPinentry): New.
(opts): Add --debug-pinentry.
(parse_rereadable_options): Set that option.
* agent/call-pinentry.c (start_pinentry): Pass option to
assuan_set_flag.
--
This option is quite useful to see the IPC between gpg-agent and
Pinentry. Note that "debug 1024" is also required.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (PINENTRY_STATUS_PASSWORD_FROM_CACHE): New
constant.
(pinentry_status_cb): Add it to *FLAGS if PASSWORD_FROM_CACHE was
provided.
(agent_askpin): Pass "OPTION allow-external-password-cache" to the
pinentry. Always pass SETKEYINFO to the pinentry. If there is no
stable identifier, then use "--clear". If the password is incorrect
and PINENTRY_STATUS_PASSWORD_FROM_CACHE is set in *PINENTRY_STATUS,
then decrement PININFO->FAILED_TRIES.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* agent/call-pinentry.c (pinentry_status_cb): Or in
PINENTRY_STATUS_CLOSE_BUTTON; don't overwrite *FLAG.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* agent/call-pinentry.c (PINENTRY_STATUS_CLOSE_BUTTON): New constant.
(PINENTRY_STATUS_PIN_REPEATED): Likewise.
(close_button_status_cb): Rename from this...
(pinentry_status_cb): ... to this. Use the constants.
(agent_askpin): Rename local variable from close_button to
pinentry_status. Use symbolic constants rather than magic numbers.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* common/logging.h: Rename JNLIB_LOG_* to GPGRT_LOG_*.
* common/mischelp.h: Rename JNLIB_GCC_* to GPGRT_GCC_*.
--
JNLIB has no more meaning. Thus we switch to a GPGRT_ prefix in
anticipation that some code may eventually be moved to libgpg-error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (agent_askpin): Add args keyinfo and
cache_mode. Change all callers to pass (NULL,0) for them. Send
SETKEYINFO command.
* agent/findkey.c (unprotect): Pass the keygrip and the cache_mode for
the new args.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cvt-openpgp.c (apply_protection): Strip leading zeroes from
opaque MPIs to comply with the OpenPGP spec.
--
This patch is the protected private key counterpart to commit ab17f7b.
Thanks to andy_s for describing the problem.
GnuPG-bug-id: 1853
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (ssh_search_control_file): Check S before
upcasing it.
--
In contradiction to the comment we did not check the length of HEXGRIP
and thus the GPG_ERR_INV_LENGTH was never triggered.
Detected by Stack 0.3:
bug: anti-simplify
model: |
%cmp8 = icmp ne i32 %i.0, 40, !dbg !986
--> false
stack:
- /home/wk/s/gnupg/agent/command-ssh.c:1226:0
ncore: 2
core:
- /home/wk/s/gnupg/agent/command-ssh.c:1225:0
- buffer overflow
- /home/wk/s/gnupg/agent/command-ssh.c:1225:0
- buffer overflow
* agent/call-pinentry.c (unlock_pinentry): Add error logging. Map
error source of uncommon errors to Pinentry.
--
With this change it is possible to detect whether an error like
GPG_ERR_ASS_INV_RESPONSE has its origin in a call to Pinentry or comes
from another part of gpg-agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/pksign.c (agent_pksign_do): Use int.
* scd/app-openpgp.c (get_public_key): Likewise.
--
On 64-bit architecture, int and size_t might be different.
For the first argument for '%b', int is expected.
* common/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
Commit 91b826a388 was not enough to
avoid all sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that once and for
all almost all uses of "<< 24" and "<< 8" are changed by this patch to
use an inline function from host2net.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (get_default_pinentry_name): New.
(gnupg_module_name): Use that for the default pinentry.
(gnupg_module_name_flush_some): New.
* agent/gpg-agent.c (agent_sighup_action): Flush some module names.
* agent/call-pinentry.c (start_pinentry): Do not modify
opt.pinentry_program.
--
The idea with this change is that under Windows we can install a
simple native Windows pinentry as "pinentry-basic" and a full GUI
version may then later install pinentry-gtk etc which would then
automatically be used.
Unfortunately installing another pinentry from a different package
would clobber the GnuPG core directory which is not nice. To fix that
we would need to agree on standard installation directories for GUIs
to also look there.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cvt-openpgp.c (extract_private_key): Add arg "arraysize".
Make sure that R_FLAGS and R_CURVE are set to NULL.
--
Given that extract_private_key is not file local it is good to have some
extra asserts to protect against future wrong use.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cvt-openpgp.c (extract_private_key): New.
(convert_to_openpgp): Use extract_private_key.
* agent/findkey.c (agent_public_key_from_file): Use
extract_private_key.
--
This patch add support of ECC key with a curve name and flags. Since
same functionality is also needed for convert_to_openpgp, it was
factored out into the extract_private_key function.
* agent/divert-scd.c (divert_pkdecrypt): Support ECDH.
* scd/app-openpgp.c (get_algo_byte, store_fpr): Support ECDH.
(send_key_attr): Support ECDH. Fix EdDSA algorithm value.
(retrieve_key_material): Initialize fields.
(get_public_key, ecc_writekey, do_writekey): Support ECDH.
(ecdh_writekey): Remove.
(do_decipher): Support ECDH.
(parse_algorithm_attribute): Support ECDH. Fix EdDSA.
--
Following the gpg-agent protocol, SCDaemon's counter part is now
implemented.
* agent/gpg-agent.c (finalize_rereadable_options): New.
(main, reread_configuration): Call it.
--
This change should help to avoid surprising behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (setup_ssh_env): Move code to ...
* agent/gpg-agent.c (agent_copy_startup_env): .. new function. Change
calllers.
* agent/command.c (start_command_handler): Call that fucntion for
restricted connections.
--
A remote connection is and should not be able to setup the local
session environment. However, unless --keep-display is used we would
be left without an environment and thus pinentry can't be used. The
fix is the same as used for ssh-agent connection: We use the default
environment as used at the startup of the agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_learn): Add option --sendinfo.
* agent/learncard.c (agent_handle_learn): Add arg "send" andsend
certifciate only if that is set.
* g10/call-agent.c (agent_scd_learn): Use --sendinfo. Make INFO
optional.
(agent_learn): Remove.
* g10/keygen.c (gen_card_key): Replace agent_learn by agent_scd_learn.
--
The requirement of using --card-status on the first use of card on a
new box is a bit annoying but the alternative of always checking
whether a card is available before a decryption starts does not sound
promising either.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/scdaemon.c (ENAMETOOLONG): New.
(redir_socket_name): New.
(cleanup): Take care of a redirected socket.
(main): Pass redir_socket_name to create_server_socket.
(create_socket_name): Remove superfluous length check.
(create_server_socket): Add arg r_redir_name and implement
redirection. Replace assert for older Assuan by an error message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (ENAMETOOLONG): New.
(redir_socket_name, redir_socket_name_extra)
(redir_socket_name_ssh): New.
(remove_socket): Take care of the redir names.
(main): Pass the redir names to create_server_socket.
(create_socket_name): Remove length check - that is anyway done later.
(create_server_socket): Add arg r_redir_name and implement redirection
if Libassuan is at least 2.14.
* agent/agent.h (opt): Add field extra_socket.
(server_control_s): Add field restricted.
* agent/command.c: Check restricted flag on many commands.
* agent/gpg-agent.c (oExtraSocket): New.
(opts): Add option --extra-socket.
(socket_name_extra): New.
(cleanup): Cleanup that socket name.
(main): Implement oExtraSocket.
(create_socket_name): Add arg homedir and change all callers.
(create_server_socket): Rename arg is_ssh to primary and change
callers.
(start_connection_thread): Take ctrl as arg.
(start_connection_thread_std): New.
(start_connection_thread_extra): New.
(handle_connections): Add arg listen_fd_extra and replace the
connection starting code by parameterized loop.
* common/asshelp.c (start_new_gpg_agent): Detect the use of the
restricted mode and don't fail on sending the pinentry environment.
* common/util.h (GPG_ERR_FORBIDDEN): New.
* gl/: Remove entire tree.
* configure.ac: Remove gnulib tests and the gl/ Makefile.
(setenv): Add to AC_CHECK_FUNCS.
* autogen.rc (extra_aclocal_flags): Set to empty.
* Makefile.am (ACLOCAL_AMFLAGS): Remove -I gl/m4
(SUBDIRS): Remove gl/.
* agent/Makefile.am (common_libs): Remove ../gl/gnulib.a
* common/Makefile.am (t_common_ldadd): Ditto.
* dirmngr/Makefile.am (dirmngr_LDADD): Ditto.
(dirmngr_ldap_LDADD, dirmngr_client_LDADD): Ditto.
* g10/Makefile.am (needed_libs): Ditto.
* g13/Makefile.am (g13_LDADD): Ditto.
* kbx/Makefile.am (kbxutil_LDADD): Ditto.
($(PROGRAMS)): Ditto.
* scd/Makefile.am (scdaemon_LDADD): Ditto.
* sm/Makefile.am (common_libs): Ditto.
* tools/Makefile.am (common_libs, commonpth_libs): Ditto.
* agent/gpg-agent.c: Remove "mkdtemp.h"
* g10/exec.c: Ditto.
* scd/scdaemon.c: Ditto.
* tools/symcryptrun.c: Ditto.
* common/sysutils.c: Remove "setenv.h"
* common/t-timestuff.c: Use putenv if setenv is not available.
--
gnulib has always been a cause of trouble in GnuPG because we used
only a very few functions and the complex include machinery of gnulib
is quite complex and the cause for many build problems for example on
OS X. This is not gnulib's fault but due to our limited use of gnulib
and that we only rarely update the gnulib code to avoid regressions.
In part two we will address the functions
mkdtemp
setenv
unsetenv
strpbrk
which may bot be implemented on all platforms. They are not required
on a libc based system.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Also fixed some of my own copyright notices due to the termination of
my assignment. The one displayed by --version is kept at FSF because
we had contributors in 2014 with FSF assignments and it gives the FSF
some visibility.
* agent/command.c (cmd_export_key): Actually implement the cache_nonce
feature.
* g10/export.c (do_export_stream): Make use of a cache_nonce.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oDebugQuickRandom): New.
(opts): New option --debug-quick-random.
(main): Use new option.
* common/asshelp.c (start_new_gpg_agent): Add hack to pass an
additional argument for the agent name.
* tests/openpgp/defs.inc: Pass --debug-quick-random to the gpg-agent
starting parameters.
* tests/openpgp/version.test: Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (struct pin_entry_info_s): Add fields repeat_okay and
with_repeat.
* agent/call-pinentry.c (close_button_status_cb): Rewrite and check
for PIN_REPEAT. Change users to check only the relevant bit.
(agent_askpin): Support repeat logic of new Pinentries.
* agent/command-ssh.c (ssh_identity_register): Use the new repeat
feature.
* agent/genkey.c (agent_ask_new_passphrase): Ditto.
--
If we need to confirm a passphrase entry (e.g. for new passphrase) we
set a flag into the pinentry info block. The we try to use the new
pinentry command SETREPEATERROR; if that fails, we continue as usual.
If that succeeds we ask the pinentry to show the repeat (confirmation)
prompt and on successful return we set another flag in the pinentry
info block so that the caller can skip its own confirmation check. A
new status line from the pinentry indicates that the feature is
actually supported (it may not be supported on certain systems for
example when using the ncurses backend).
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Remove field use_standard_socket.
* agent/command.c (cmd_killagent): Always allow killing.
* agent/gpg-agent.c (main): Turn --{no,}use-standard-socket and
--write-env-file into dummy options. Always return true for
--use-standard-socket-p. Do not print the GPG_AGENT_INFO envvar
setting or set that envvar.
(create_socket_name): Simplify by removing non standard socket
support.
(check_for_running_agent): Ditto.
* common/asshelp.c (start_new_gpg_agent): Remove GPG_AGENT_INFO use.
* common/simple-pwquery.c (agent_open): Ditto.
* configure.ac (GPG_AGENT_INFO_NAME): Remove.
* g10/server.c (gpg_server): Do not print the AgentInfo comment.
* g13/server.c (g13_server): Ditto.
* sm/server.c (gpgsm_server): Ditto.
* tools/gpgconf.c (main): Simplify by removing non standard socket
support.
--
The indented fix to allow using a different socket than the one in the
gnupg home directory is to change Libassuan to check whether the
socket files exists as a regualr file with a special keyword to
redirect to another socket file name.
* agent/cache.c (last_stored_cache_key): New.
(agent_get_cache): Allow NULL for KEY.
(agent_store_cache_hit): New.
* agent/findkey.c (unprotect): Call new function and try to use the
last stored key.
* g10/revoke.c (create_revocation): Add arg CACHE_NONCE and pass to
make_keysig_packet.
(gen_standard_revoke): Add arg CACHE_NONCE and pass to
create_revocation.
* g10/keygen.c (do_generate_keypair): Call gen_standard_revoke with
cache nonce.
--
This patch adds two features:
1. The key for the last passphrase successfully used for unprotecting
a key is stored away. On a cache miss the stored away passphrase is
tried as well. This helps for the common GPG use case of having a
signing and encryption (sub)key with the same passphrase. See the
code for more comments.
2. The now auto-generated revocation certificate does not anymore
popup a passphrase prompt. Thus for standard key generation the
passphrase needs to be given only once (well, two with the
confirmation).
* agent/cvt-openpgp.c (get_keygrip): Special case EdDSA.
(convert_secret_key): Ditto.
(convert_transfer_key): Ditto.
(apply_protection): Handle opaque MPIs.
(do_unprotect): Check FLAG_OPAQUE instead of FLAG_USER1 before
unpacking an opaque mpi.
--
The key transfer protocol between gpg and gpg-agent uses gcrypt
algorithm numbers which merge all ECC algorithms into one. Thus it is
not possible to use the algorithm number to determine the EdDSA
algorithm. We need to known that because Libgcrypt requires the
"eddsa" flag with the curve "Ed25519" to actually use the Ed25519
signature specification.
The last fix is for correctness; the first case won't be used anyway.
* agent/protect.c (PROT_CIPHER): Rename to GCRY_CIPHER_AES128 for
clarity.
(do_decryption): Add args prot_cipher and prot_cipher_keylen. USe
them instead of the hardwired values.
(agent_unprotect): Change to use a table of protection algorithms.
Add AES-256 variant.
--
This patch will make a possible future key protection algorithm
changes smoother. AES-256 is also allowed although there is currently
no way to encrypt using it.
* agent/cvt-openpgp.c (convert_to_openpgp): Use the curve name instead
of the curve parameters.
* g10/export.c (canon_pubkey_algo): Rename to ...
(canon_pk_algo): this. Support ECC.
(transfer_format_to_openpgp): Expect curve name.
* agent/cvt-openpgp.c (do_unprotect): Return an s-exp also for
non-protected keys.
(convert_from_openpgp_main): Do not call agent_askpin for a
non-protected key.
* agent/cvt-openpgp.c (try_do_unprotect_arg_s): Add field "curve".
(get_keygrip): Add and use arg CURVE.
(convert_secret_key): Ditto.
(convert_transfer_key): Ditto.
(get_npkey_nskey): New.
(prepare_unprotect): Replace gcrypt functions by
get_npkey_nskey. Allow opaque MPIs.
(do_unprotect): Use CURVE instead of parameters.
(convert_from_openpgp_main): Ditto.
(convert_to_openpgp): Simplify.
* g10/import.c (one_mpi_from_pkey): Remove.
(transfer_secret_keys): Rewrite to use the curve instead of the
parameters.
* g10/parse-packet.c (parse_key): Mark protected MPIs with USER1 flag.
* common/openpgp-oid.c (openpgp_curve_to_oid): Allow the use of
"NIST P-256" et al.
* g10/keygen.c (ask_curve): Add arg ALGO.
(generate_keypair): Rewrite the ECC key logic.
* tests/openpgp/ecc.test: Provide the "ecc" passphrase.
* agent/cvt-openpgp.c (get_keygrip, convert_secret_key)
(convert_transfer_key): Follow newer (>= 1.6) libgcrypt API, which
does not distinguish the detail.
(do_unprotect, convert_from_openpgp_main): Don't call
map_pk_openpgp_to_gcry, as it's the value of libgcrypt API already and
not the value defined by OpenPGP.
(convert_to_openpgp): It's "ecc".
* agent/gpg-agent.c (map_pk_openpgp_to_gcry): Remove.
* g10/call-agent.c (agent_pkdecrypt): Fix off-by-one error.
* g10/pubkey-enc.c (get_it): Fix swapping the fields error.
* agent/gpg-agent.c (main): Make sure homedir is absolute.
* common/asshelp.c (lock_spawning): Create lock file with an absolute
name.
(start_new_gpg_agent): Use an absolute name for the socket and pass
option --homedir to the agent.
(start_new_dirmngr): Use an absolute name for the --homedir.
--
This patch makes gpg's --homedir option behave again like in older
versions. This is done by starting a new agent for each different
home directory. Note that this assumes --use-standard-socket is used
which is the default for 2.1.
* agent/cvt-openpgp.c (convert_to_openpgp): Fix use
gcry_sexp_extract_param.
* g10/export.c (do_export_stream): Provide a proper prompt to the
agent.
--
NB: The export needs more work, in particular the ECC algorithms.
* agent/command-ssh.c (ssh_read_key_public_from_blob): Use
es_fopenmem.
(ssh_handler_request_identities): Ditto.
(ssh_request_process): Ditto.
--
es_fopenmem is easier to understand than the more general function
es_mopen. Thus we better use the former for clarity.
* agent/command-ssh.c (ssh_key_type_spec): Add field name.
(ssh_key_types): Add human readable names.
(add_control_entry): Add arg SPEC and print key type as comment.
(ssh_identity_register): Add arg SPEC.
(ssh_handler_add_identity): Add var SPEC and pass ssh_receive_key.
* agent/command-ssh.c (SPEC_FLAG_IS_EdDSA): New.
(ssh_key_types): Add entry for ssh-ed25519.
(ssh_identifier_from_curve_name): Move to the top.
(stream_read_skip): New.
(stream_read_blob): New.
(ssh_signature_encoder_rsa): Replace MPIS array by an s-exp and move
the s-exp parsing to here.
(ssh_signature_encoder_dsa): Ditto.
(ssh_signature_encoder_ecdsa): Ditto.
(ssh_signature_encoder_eddsa): New.
(sexp_key_construct): Rewrite.
(ssh_key_extract): Rename to ...
(ssh_key_to_blob): .. this and rewrite most of it.
(ssh_receive_key): Add case for EdDSA.
(ssh_convert_key_to_blob, key_secret_to_public): Remove.
(ssh_send_key_public): Rewrite.
(ssh_handler_request_identities): Simplify.
(data_sign): Add rename args. Add new args HASH and HASHLEN. Make
use of es_fopenmen and es_fclose_snatch. Remove parsing into MPIs
which is now doe in the sgnature encoder functions.
(ssh_handler_sign_request): Take care of Ed25519.
(ssh_key_extract_comment): Rewrite using gcry_sexp_nth_string.
--
To make the code easier readable most of the Ed25591 work has been
done using a new explicit code path. Warning: Libgcrypt 1.6.1 uses a
non optimized implementation for Ed25519 and timing attacks might be
possible.
While working on the code I realized that it could need more rework;
it is at some places quite baroque and more complicated than needed.
Given that we require Libgcrypt 1.6 anyway, we should make more use of
modern Libgcrypt functions.
* agent/call-scd.c (start_scd): Replace int by assuan_fd_t.
(start_pinentry): Ditto.
* common/asshelp.c (start_new_gpg_agent): Replace int by assuan_fd_t.
* common/dotlock.c (GNUPG_MAJOR_VERSION): Include stringhelp.h for
prototypes on Windows and some other platforms.
* common/logging.c (fun_writer): Declare addrbuf only if needed.
* g10/decrypt.c (decrypt_message_fd) [W32]: Return not_implemented.
* g10/encrypt.c (encrypt_crypt) [W32]: Return error if used in server
mode.
* g10/dearmor.c (dearmor_file, enarmor_file): Replace GNUPG_INVALID_FD
by -1 as temporary hack for Windows.
* g10/export.c (do_export): Ditto.
* g10/revoke.c (gen_desig_revoke, gen_revoke): Ditto.
* g10/sign.c (sign_file, clearsign_file, sign_symencrypt_file): Ditto.
* g10/server.c (cmd_verify, gpg_server) [W32]: Return an error.
--
The gpg server mode is not actual working and thus we can avoid the
warnings by explicitly disabling the mode. We keep it working under
Unix, though.
* agent/command-ssh.c (setup_ssh_env): Fix env setting.
--
gniibe reported this to gnupg-devel on 2012-07-04:
[...]
(2) UPDATESTARTUPTTY doesn't work to switch TTY for pinentry for
SSH.
[...]
Current implementation:
In the function start_command_handler_ssh, the logic puts
priority on ctrl->session_env which is initialized by
agent_init_default_ctrl. There are always GPG_TTY and TERM
defined, because lines around 968 in gpg-agent.c, it says:
/* Make sure that we have a default ttyname. */
While UPDATESTARTUPTTY updates opt.startup_env, it doesn't
affect at all.
Here is a patch to point the issue. Tested and works for me.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 9f5578c29a)
* agent/gpg-agent.c (opts, main): Add option --no-allow-mark-trusted.
Put this option into the gpgconf-list.
(main): Enable opt.allow_mark_trusted by default.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Replace
allow-mark-trusted by no-allow-mark-trusted.
* agent/trustlist.c (agent_marktrusted): Always set the "relax" flag.
--
These changes have been in effect for the Gpg4win Windows version
since 2011-01-24 and thus first released with Gpg4win 2.1.0. Given
the current state of PKIX it does not make any sense to lure the Unix
user into false security by making it harder to trust self-signed or
CAcert certificates.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 90b419f3e9)
Resolved conflicts:
NEWS
agent/gpg-agent.c
* agent/gpg-agent.c [W32]: Include Several Windows header.
(opts): Change help text for enable-ssh-support.
(opts, main): Add option --enable-putty-support
(putty_support, PUTTY_IPC_MAGIC, PUTTY_IPC_MAXLEN): New for W32.
(agent_init_default_ctrl): Add and asssert call.
(putty_message_proc, putty_message_thread): New.
(handle_connections) [W32]: Start putty message thread.
* common/sysutils.c (w32_get_user_sid): New for W32 only
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add
--enable-ssh-support and --enable-putty-support. Make the
configuration group visible at basic level.
* agent/command-ssh.c (serve_mmapped_ssh_request): New for W32 only.
--
This patch enables support for Putty. It has been tested with Putty
0.62 using an Unix created ssh key copied to the private-keys-v1.d
directory on Windows and with a manually crafted sshcontrol file. It
also works with a smartcard key.
May thanks to gniibe who implemented a proxy in Python to test the
putty/gpg-agent communication.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 9f32499f99)
Resolved conflicts:
NEWS
agent/agent.h
agent/gpg-agent.c: Convert from pth to npth.
common/sysutils.c
common/sysutils.h
* agent/command-ssh.c (file_to_buffer)
(ssh_handler_request_identities): Open streams in binary mode.
(start_command_handler_ssh): Factor some code out to ..
(setup_ssh_env): new function.
--
This is for now a theoretical fix because there is no ssh client yet
which uses the GnuPG style IPC. OpenSSL for Cygwin uses only a quite
similar one. gniibe suggested to implement that IPC style in
Libassuan so that a Cygwin version of OpenSSL may be used with GnuPG.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit ed056d67c7)
Also fixed one typo.
* agent/gpg-agent.c (main): s/ttyname/gnupg_ttyname/.
--
This was not triggered by the latest mingw runtime but that has other
problems and thus I reverted to the same we used for gpg4win 2.1 which
is Debian Wheezy.
* common/sexputil.c (get_pk_algo_from_canon_sexp): Change to return a
string.
* g10/keygen.c (check_keygrip): Adjust for change.
* sm/certreqgen-ui.c (check_keygrip): Likewise.
* agent/pksign.c (do_encode_dsa): Remove bogus map_pk_openpgp_to_gcry.
* g10/misc.c (map_pk_openpgp_to_gcry): Remove.
(openpgp_pk_test_algo): Change to a wrapper for openpgp_pk_test_algo2.
(openpgp_pk_test_algo2): Rewrite.
(openpgp_pk_algo_usage, pubkey_nbits): Add support for EdDSA.
(openpgp_pk_algo_name): Rewrite to remove need for gcry calls.
(pubkey_get_npkey, pubkey_get_nskey): Ditto.
(pubkey_get_nsig, pubkey_get_nenc): Ditto.
* g10/keygen.c(do_create_from_keygrip): Support EdDSA.
(common_gen, gen_ecc, ask_keysize, generate_keypair): Ditto.
* g10/build-packet.c (do_key): Ditto.
* g10/export.c (transfer_format_to_openpgp): Ditto.
* g10/getkey.c (cache_public_key): Ditto.
* g10/import.c (transfer_secret_keys): Ditto.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Ditto.
* g10/mainproc.c (proc_pubkey_enc): Ditto.
* g10/parse-packet.c (parse_key): Ditto,
* g10/sign.c (hash_for, sign_file, make_keysig_packet): Ditto.
* g10/keyserver.c (print_keyrec): Use openpgp_pk_algo_name.
* g10/pkglue.c (pk_verify, pk_encrypt, pk_check_secret_key): Use only
OpenPGP algo ids and support EdDSA.
* g10/pubkey-enc.c (get_it): Use only OpenPGP algo ids.
* g10/seskey.c (encode_md_value): Ditto.
--
This patch separates Libgcrypt and OpenPGP public key algorithms ids
and in most cases completely removes the Libgcrypt ones. This is
useful because for Libgcrypt we specify the algorithm in the
S-expressions and the public key ids are not anymore needed.
This patch also adds some support for PUBKEY_ALGO_EDDSA which will
eventually be used instead of merging EdDSA with ECDSA. As of now an
experimental algorithm id is used but the plan is to write an I-D so
that we can get a new id from the IETF. Note that EdDSA (Ed25519)
does not yet work and that more changes are required.
The ECC support is still broken right now. Needs to be fixed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (main): Defer setting of socket_name_ssh to avoid
removal of the socket when it will die in create_server_socket for
socket_name.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
* agent/findkey.c (key_parms_from_sexp): Add algo name "ecc".
(agent_is_dsa_key): Ditto.
(agent_is_eddsa_key): New. Not finished, though.
* agent/pksign.c (do_encode_eddsa): New.
(agent_pksign_do): Use gcry_log_debug functions.
* agent/protect.c (agent_protect): Parse a flags parameter.
* g10/keygen.c (gpg_curve_to_oid): Move to ...
* common/openpgp-oid.c (openpgp_curve_to_oid): here and rename.
(oid_ed25519): New.
(openpgp_oid_is_ed25519): New.
(openpgp_oid_to_curve): New.
* common/t-openpgp-oid.c (test_openpgp_oid_is_ed25519): New.
* g10/build-packet.c (gpg_mpi_write): Write the length header also for
opaque MPIs.
(gpg_mpi_write_nohdr): New.
(do_key): Use gpg_mpi_write_nohdr depending on algorithm.
(do_pubkey_enc): Ditto.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Use
gpg_mpi_write_nohdr.
* g10/export.c (transfer_format_to_openpgp):
* g10/keygen.c (ecckey_from_sexp): Return the error.
(gen_ecc): Repalce arg NBITS by CURVE.
(read_parameter_file): Add keywords "Key-Curve" and "Subkey-Curve".
(ask_curve): New.
(generate_keypair, generate_subkeypair): Use ask_curve.
(do_generate_keypair): Also pass curve name.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Print
curve name.
* g10/parse-packet.c (mpi_read): Remove workaround for
Libcgrypt < 1.5.
(parse_key): Fix ECC case. Print the curve name.
* g10/pkglue.c (mpi_from_sexp): Rename to get_mpi_from_sexp.
(pk_verify, pk_check_secret_key): Add special case for Ed25519.
* g10/seskey.c (encode_md_value): Ditto.
* g10/sign.c (do_sign, hash_for, sign_file): Ditto.
--
Be warned that this code is subject to further changes and that the
format will very likely change before a release. There are also known
bugs and missing code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/pksign.c (do_encode_dsa): Remove Libgcrypt version check
--
Now that we have decided on a release plan for Libgcrypt 1.6 and given
all the improvements it makes more sense to make use of these
improvements than to clutter the GnuPG code with workarounds for older
Libgcrypt versions.
* agent/pksign.c (rfc6979_hash_algo_string): New.
(do_encode_dsa) [Libgcrypt >= 1.6]: Make use of RFC-6979.
--
Now that we have a good (and not NSA/NIST demanded ;-) specification
on how to use DSA without a random nonce, we take advantage of it and
thus avoid pitfalls related to a misbehaving RNG during signature
creation.
Note that OpenPGP has the option of using a longer hash algorithm but
truncated to what is suitable for the used DSA key size. The hash
used as input to RFC-6979 will also be one with an appropriate digest
length but not a truncated one. This is allowed by RFC-6979.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (APP_DECIPHER_INFO_NOPAD): New.
* scd/app-openpgp.c (do_decipher): Add arg R_INFO.
* scd/app-nks.c (do_decipher): Add arg R_INFO as a dummy.
* scd/app.c (app_decipher): Add arg R_INFO.
* scd/command.c (cmd_pkdecrypt): Print status line "PADDING".
* agent/call-scd.c (padding_info_cb): New.
(agent_card_pkdecrypt): Add arg R_PADDING.
* agent/divert-scd.c (divert_pkdecrypt): Ditto.
* agent/pkdecrypt.c (agent_pkdecrypt): Ditto.
* agent/command.c (cmd_pkdecrypt): Print status line "PADDING".
* g10/call-agent.c (padding_info_cb): New.
(agent_pkdecrypt): Add arg R_PADDING.
* g10/pubkey-enc.c (get_it): Use padding info.
--
Decryption using a card never worked in gpg 2.1 because the
information whether the pkcs#1 padding needs to be removed was not
available. Gpg < 2.1 too this info from the secret sub key but that
has gone in 2.1.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_preset_passphrase, pinentry_loopback): Use %zu
in format string.
* scd/ccid-driver.c (ccid_get_atr): Ditto.
* agent/command-ssh.c (stream_read_string): Init arg STRING_SIZE to
avoid maybe_unitialized warning.
--
Actually the first one might have been a problem on big endian
machines.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (struct control_file_s): Rename to
ssh_control_file_s.
(ssh_open_control_file, ssh_close_control_file)
(ssh_read_control_file, ssh_search_control_file): New.
(control_file_t): Rename and move to ...
* agent/agent.h (ssh_control_file_t): here.
* agent/command.c (do_one_keyinfo): Add args is_ssh, ttl, disabled,
and confirm. Rename unknown keytype indicator from '-' to 'X'. Extend
output.
(cmd_keyinfo): Add options --ssh-list and --with-ssh.
--
This extension allows the development of frontends to manage the
sshcontrol file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/Makefile.am (gpg_agent_DEPENDENCIES): Remove cruft from wrong
resolve conflict 2013-04-25.
(gpg_agent_DEPENDENCIES): Remove obsolete gpg_agent_res_deps
(gpg_agent_LDFLAGS): Remove obsolete gpg_agent_res_ldflags.
--
This fixes 88e24341e5. Thanks to
Christian Aistleitner for pinpointing this bug. Am sorry for accusing
automake to have introduced this bug; I should have washed my own eyes.
GnuPG-bug-id: 1511
* agent/command.c (cmd_import_key): Add option --unattended.
* agent/cvt-openpgp.c (convert_transfer_key): New.
(do_unprotect): Factor some code out to ...
(prepare_unprotect): new function.
(convert_from_openpgp): Factor all code out to ...
(convert_from_openpgp_main): this. Add arg 'passphrase'. Implement
openpgp-native protection modes.
(convert_from_openpgp_native): New.
* agent/t-protect.c (convert_from_openpgp_native): New dummy fucntion
* agent/protect-tool.c (convert_from_openpgp_native): Ditto.
* agent/protect.c (agent_unprotect): Add arg CTRL. Adjust all
callers. Support openpgp-native protection.
* g10/call-agent.c (agent_import_key): Add arg 'unattended'.
* g10/import.c (transfer_secret_keys): Use unattended in batch mode.
--
With the gpg-agent taking care of the secret keys, the user needs to
migrate existing keys from secring.gpg to the agent. This and also
the standard import of secret keys required the user to unprotect the
secret keys first, so that gpg-agent was able to re-protected them
using its own scheme. With many secret keys this is quite some
usability hurdle. In particular if a passphrase is not instantly
available.
To make this migration smoother, this patch implements an unattended
key import/migration which delays the conversion to the gpg-agent
format until the key is actually used. For example:
gpg2 --batch --import mysecretkey.gpg
works without any user interaction due to the use of --batch. Now if
a key is used (e.g. "gpg2 -su USERID_FROM_MYSECRETKEY foo"), gpg-agent
has to ask for the passphrase anyway, converts the key from the
openpgp format to the internal format, signs, re-encrypts the key and
tries to store it in the gpg-agent format to the disk. The next time,
the internal format of the key is used.
This patch has only been tested with the old demo keys, more tests
with other protection formats and no protection are needed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_import_key): Pass 0 instead of KEYLEN to
gcry_sexp_canon_len.
--
We used to pass KEYLEN to the gcry_sexp_canon_len for no good reason:
convert_from_openpgp is guaranteed to return a valid canonical
S-expression and KEYLEN would thus act only as an upper limit. This
is not a problem because usually the original input key is longer than
the returned unprotected key. A future patch may change this
assertion and thus we better fix this bug now.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oDisableCheckOwnSocket): New.
(disable_check_own_socket): New.
(parse_rereadable_options): Set new option.
(check_own_socket): Implement new option.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_keytocard): Decrement KEYDATALEN.
* agent/findkey.c (agent_public_key_from_file): Increment for ELEMS.
--
For ECDSA and ECDH, there are 6 elements.
* common/agent-opt.c: New.
* common/shareddefs.h: New.
* common/Makefile.am: Add new files.
* agent/agent.h: Include shareddefs.h.
(pinentry_mode_t): Factor out to shareddefs.h.
* agent/command.c (option_handler): Use parse_pinentry_mode.
* agent/command-ssh.c (SPEC_FLAG_IS_ECDSA): New.
(struct ssh_key_type_spec): Add fields CURVE_NAME and HASH_ALGO.
(ssh_key_types): Add types ecdsa-sha2-nistp{256,384,521}.
(ssh_signature_encoder_t): Add arg spec and adjust all callers.
(ssh_signature_encoder_ecdsa): New.
(sexp_key_construct, sexp_key_extract, ssh_receive_key)
(ssh_convert_key_to_blob): Support ecdsa.
(ssh_identifier_from_curve_name): New.
(ssh_send_key_public): Retrieve and pass the curve_name.
(key_secret_to_public): Ditto.
(data_sign): Add arg SPEC and change callers to pass it.
(ssh_handler_sign_request): Get the hash algo from SPEC.
* common/ssh-utils.c (get_fingerprint): Support ecdsa.
* agent/protect.c (protect_info): Add flag ECC_HACK.
(agent_protect): Allow the use of the "curve" parameter.
* agent/t-protect.c (test_agent_protect): Add a test case for ecdsa.
* agent/command-ssh.c (ssh_key_grip): Print a better error code.
--
The 3 standard curves are now supported in gpg-agent's ssh-agent
protocol implementation. I tested this with all 3 curves and keys
generated by OpenSSH 5.9p1.
Using existing non-ssh generated keys will likely fail for now. To fix
this, the code should first undergo some more cleanup; then the fixes
are pretty straightforward. And yes, the data structures are way too
complicated.
* agent/command-ssh.c: Remove dirent.h.
(control_file_s): Add struct item.
(rewind_control_file): New.
(search_control_file): Factor code out to ...
(read_control_file_item): New.
(ssh_handler_request_identities): Change to iterate over entries in
sshcontrol.
--
Formerly we scanned the private key directory for matches of entries
in sshcontrol. This patch changes it to scan the sshcontrol file and
thus considers only keys configured there. The rationale for this is
that it is common to have only a few ssh keys but many private keys.
Even if that assumption does not hold true, the scanning of the
sshcontrol file is faster than reading the directory and only then
scanning the ssh control for each directory entry.
* agent/command-ssh.c (SSH_CONTROL_FILE_NAME): New macro to replace
the direct use of the string.
(struct control_file_s, control_file_t): New.
(open_control_file, close_control_file): New. Use them instead of
using fopen/fclose directly.
* agent/gpg-agent.c (main): Pass new envar gnupg_SSH_AUTH_SOCK_by to
an invoked process.
--
This environment variable is useful for debugging if
--use-standard-socket is used (which is the default since 2.1).
Commonly you should have this in your init script (e.g. ~/.bashrc):
unset GPG_AGENT_INFO
unset SSH_AGENT_PID
SSH_AUTH_SOCK="${HOME}/.gnupg/S.gpg-agent.ssh"
export SSH_AUTH_SOCK
The problem is that gpg-agent won't be able to override the
SSH_AUTH_SOCK envvar if gpg-agent has been invoked as
gpg-agent --enable-ssh-support --daemon /bin/bash
To fix this you should instead use this code in the init script:
unset GPG_AGENT_INFO
unset SSH_AGENT_PID
if [ ${gnupg_SSH_AUTH_SOCK_by:-0} -ne $$ ]; then
export SSH_AUTH_SOCK="${HOME}/.gnupg/S.gpg-agent.ssh"
fi
This will work in all cases and thus allows to start gpg-agent for
testing purposes with a different homedir and use this gpg-agent as an
ssh-agent. Example:
GNUPGHOME=$(pwd) gpg-agent --enable-ssh-support --daemon /bin/bash
gnupg_SSH_AUTH_SOCK_by is set to the PID of the exec-ed process and
thus will work safely if called recursively.
* configure.ac (HAVE_BROKEN_TTYNAME): New ac_define set for Android
systems.
* common/util.h (gnupg_ttyname): New macro. Change all callers of
ttyname to use this macro instead.
(ttyname) [W32]: Rename to _gnupg_ttyname and use also if
HAVE_BROKEN_TTYNAME is defined.
* common/simple-pwquery.c (agent_send_all_options): Keep on using
ttyname unless HAVE_BROKEN_TTYNAME is set. This is because this file
may be used standalone.
* scd/command.c (MAXLEN_SETDATA): New.
(cmd_setdata): Add option --append.
* agent/call-scd.c (agent_card_pkdecrypt): Use new option for long
data.
* scd/app-openpgp.c (struct app_local_s): Add field manufacturer.
(app_select_openpgp): Store manufacturer.
(do_decipher): Print a note for broken cards.
--
Please note that I was not able to run a full test because I only have
broken cards (S/N < 346) available.
* findkey.c (agent_public_key_from_file): Fix use of
gcry_sexp_build_array.
--
A test case leading to a segv in Libgcrypt is
gpg-connect-agent \
"READKEY 9277C5875C8AFFCB727661C18BE4E0A0DEED9260" /bye
The keygrip was created by "monkeysphere s", which has a comment.
gcry_sexp_build_array expects pointers to the arguments which is quite
surprising. Probably ARG_NEXT was accidentally implemented wrongly.
Anyway, we can't do anything about it and thus need to fix the check
the users of this function.
Some-comments-by: Werner Koch <wk@gnupg.org>
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
* agent/trustlist.c (clear_trusttable): New.
(agent_reload_trustlist): Use new function.
(read_trustfiles): Require to be called with lock held.
(agent_istrusted): Factor all code out to ...
(istrusted_internal): new. Add ALREADY_LOCKED arg. Make sure the
table islocked. Do not print TRUSTLISTFLAG stati if called internally.
(agent_marktrusted): Replace calls to agent_reload_trustlist by
explicit code.
--
In contrast to pth, npth does not use recursive mutexes by default.
However, the code in trustlist.c assumed recursive locks and thus we
had to rework it.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
This is not yet fully implemented. It will eventually allow to
support pinpad equipped readers which do not support variable length
pin lengths.
* agent/protect.c (parse_shadow_info): Add optional arg R_PINLEN and
parse pinlen info. Change all callers to pass NULL for it.
* agent/command.c: Include asshelp.h.
(cmd_pkdecrypt, cmd_genkey, cmd_preset_passphrase)
(pinentry_loopback): Use print_assuan_status for INQUIRE_MAXLEN.
For the shared code parts it is cumbersome to pass an error sourse
variable to each function. Its value is always a constant for a given
binary and thus a global variable makes things a lot easier than the
former macro stuff.
* common/init.c (default_errsource): New global var.
(init_common_subsystems): Rename to _init_common_subsystems. Set
DEFAULT_ERRSOURCE.
* common/init.h: Assert value of GPG_ERR_SOURCE_DEFAULT.
(init_common_subsystems): New macro.
* common/util.h (default_errsource): Add declaration.
* kbx/keybox-defs.h: Add some GPG_ERR_SOURCE_DEFAULT trickery.
Since there isn't a way to prompt the user to insert the smartcard when
pinentry-mode=loopback, return GPG_ERR_CARD_NOT_PRESENT instead of
GPG_ERR_NO_PIN_ENTRY.
* agent/divert-scd.c (ask_for_card): Return GPG_ERR_CARD_NOT_PRESENT
when pinentry-mode=loopback.
Fix pinentry-mode=loopback when cancelling an inquire from scdaemon.
This is similar to commit 4f21f8d but for both protocol command
cancellation and pinentry cancellation.
* agent/call-scd.c (agent_card_pkdecrypt): Check for
GPG_ERR_ASS_CANCELED.
(agent_card_pksign): Ditto.
* agent/gpg-agent.c (get_agent_ssh_socket_name): Use
INVALID_HANDLE_VALUE instead of 0.
(handle_signal) [!HAVE_W32_SYSTEM]: Don't define.
(handle_connections): Port Windows code to NPTH.
* dirmngr/dirmngr.c (handle_connections): Port Windows code to NPTH.
* g13/g13.c (handle_connections): Port Windows code to NPTH.
* scd/scdaemon.c (handle_connections): Port Windows code to NPTH.
This status message is used to inform the client of the maximum length
of an inquired passphrase and is used in pinentry-mode=loopback.
* agent/command.c (pinentry_loopback): Send the INQUIRE_MAXLEN status
message before doing the inquire.
* agent/gpg-agent.c (main): Supply omitted "break" statement for
lc-messages option. Otherwise, control would fall through to the
following oXauthority case and use the same value there.
Similar to commit 29af488 but also fixes PKDECRYPT and PKSIGN.
* agent/call-scd.c (agent_card_pkdecrypt): Check for GPG_ERR_CANCELED
when returning from the PKDECRYPT operation of scdaemon and cancel the
inquire.
(agent_card_pksign): Ditto.
(cancel_inquire): New.
* agent/gpg-agent.c, dirmngr/dirmngr.c, g13/g13.c, scd/scdaemon.c
(USE_GCRY_THREAD_CBS): New macro, defined if
GCRY_THREAD_OPTION_VERSION is 0.
(fixed_gcry_pth_init) [!USE_GCRY_THREAD_CBS]: Don't define.
(main) [!USE_GCRY_THREAD_CBS]: Do not install thread callbacks.
Werner Koch