* g10/packet.h (PKT_pubkey_enc): Add field seskey_algo.
(struct pubkey_enc_list): Ditto.
* g10/misc.c (pubkey_get_nenc): Change value for Kyber from 4 to 3.
* g10/parse-packet.c (parse_pubkeyenc): Store the Kyber algo in the
new field and adjust data. Do not store the length byte in data[2].
* g10/build-packet.c (do_pubkey_enc): Take the session algo for Kyber
from the new field.
* g10/encrypt.c (write_pubkey_enc): Ses the seskey_algo.
* g10/mainproc.c (proc_pubkey_enc): Copy it.
* g10/pubkey-enc.c (get_it): Support Kyber decryption.
* g10/seskey.c (encode_session_key): Handle Kyber different from ECDH.
--
Having always the single byte in the packet data than to store and
retrieve it from an MPI is much easier. Thus this patch changes the
original internal format. With this chnages decryption of the slighly
modified test data works now. See the bug tracker for test data.
GnuPG-bug-id: 6815
* g10/mainproc.c (proc_encrypted): Force a decryption failure if any
error has been seen.
* g10/decrypt-data.c (aead_checktag): Issue an ERROR line.
--
GnuPG-bug-id: 7042
Note that gpg in any case returns a failure exit code but due to
double forking GPGME would not see it.
* g10/mainproc.c (check_sig_and_print): Don't abort computation in
the function, but returns an error.
(proc_tree): Break the loop, when check_sig_and_print returns an
error.
--
GnuPG-bug-id: 6512
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (proc_encrypted): Set complaince_de_vs also if
require-compliance is set.
--
Without this fix require-compliance would fail if no --status-fd was
used.
* g10/mainproc.c (proc_encrypted): Change compliance logic.
--
For the description of the proplem see
https://dev.gnupg.org/T6205#163306
GnuPG-bug-id: 6205
* g10/mainproc.c (proc_encrypted): Make symmetric + pubkey encryption
de-vs compliant.
* g10/mainproc.c (struct symlist_item): New.
(struct mainproc_context): Add field symenc_list.
(release_list): Free that list.
(proc_symkey_enc): Record infos from symmetric session packet.
(proc_encrypted): Check symkey packet algos
--
The original check was too strong because it is in fact compliant to
encrypt with a symmetric key and and public key. Thus decryption
should issue a compliance status.
In addition we now check that the cipher algorithms used to
symmetrically encrypt the session key are all compliant. This is
similar to our check for all public key encrypted session key packets.
GnuPG-bug-id: 6119
Fixes-commit: b03fab09e188f7bb10237d4f20455e4026737e4e
Backported from 2.2
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_symkey_enc): Issue new error code.
(proc_encrypted): Ditto.
--
This allows GPGME to return a better error message than "bad session
key" to the user. Technically we could get run into these errors also
in other cases but this more unlikley. For the command line use we
don't do anything to not change the expected output of the command
line interface.
GnuPG-bug-id: 5943
* g10/decrypt-data.c (decrypt_data): Add arg compliance_error. Adjust
all callers. Fail on compliance error only in --require-compliance
mode. Make sure to return an error if the buffer is missing; actually
that should be an assert.
* g10/mainproc.c (proc_encrypted): Delay printing of the compliance
mode status. Consult the compliance error now returned by
decrypt_data.
--
The actual case here is that we fail hard if a message has been AEAD
encrypted with one AEAD capable key and also with one passphrase. In
general the preference system takes care of not using AEAD if one
recipient's key does not support it. However, if the sender uses her
own AEAD-capable key _and_ a passphrase the message will be AEAD
encrypted. This change allows to decrypt that anyway along with a
warning message.
Note that this does currently not work in 2.3 due to a non-compliant
libgcrypt. We will however, backport this to 2.2.
* g10/options.h (opt): Add field flags.require_compliance.
* g10/gpg.c (oRequireCompliance): New.
(opts): Add --require-compliance.
(main): Set option.
* g10/mainproc.c (proc_encrypted): Emit error if non de-vs compliant.
(check_sig_and_print): Ditto.
* g10/encrypt.c (encrypt_crypt): Ditto.
--
Note that in the --encrypt and --verify cased other checks may kick in
earlier than this new --require-compliance controlled one.
* g10/mainproc.c (proc_tree): Call ask_for_detached_datafile
with MD2=NULL.
--
Here, c->mfx.md2 is always NULL, in fact. But, text-wise
(when searching the use of "mfx.md2"), before the change, it used
mfx.md2, which is irrelevant in the handling of PKT_ONEPASS_SIG.
Note that: One-Pass Signature is not available in PGP2.
This fix removes (text-wise) unmatch of the calls of functions
hash_datafile_by_fd hash_datafiles, and ask_for_detached_datafile.
Fixes-commit: 88a916cdd40e43312ffcde6bb1c157fe1c122f74
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (mainproc_context): New member
'seen_pkt_encrypted_mdc'.
(release_list): Clear 'seen_pkt_encrypted_mdc'.
(proc_encrypted): Set 'seen_pkt_encrypted_mdc'.
(have_seen_pkt_encrypted_aead): Rename to...
(have_seen_pkt_encrypted_aead_or_mdc): ...this and add check for
'seen_pkt_encrypted_mdc'.
(proc_plaintext): Do not enable extra hash contexts when decrypting
MDC input.
--
Avoiding extra hash contexts speeds up CFB/MDC decryption quite
a lot. For example, decrypting symmetric-key AES-256 encrypted
4 GiB file from RAM to /dev/null sees ~3.4x speed increase on
AMD Ryzen 5800X:
AES256.CFB encryption: 783 MB/s
AES256.CFB decryption: 386 MB/s (before)
AES256.CFB encryption: 1.3 GB/s (after patch)
Note, AEAD is still significantly faster:
AES256.OCB encryption: 2.2 GB/s
AES256.OCB decryption: 3.0 GB/s
GnuPG-bug-id: T5820
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/mainproc.c (proc_encrypted): Fix the condition to report
NO_SECKEY even when the key was not considered by get_session_key.
--
GnuPG-bug-id: 5562
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keydb.h (GETPASSWORD_FLAG_SYMDECRYPT): New.
(passphrase_to_dek_ext): Remove this obsolete prototype.
* g10/passphrase.c (passphrase_get): Add arg flags. Use new flag
value.
(passphrase_to_dek): Add arg flags and pass it on.
* g10/mainproc.c (proc_symkey_enc): Use new flag.
* sm/decrypt.c (pwri_decrypt): Use "passphrase".
--
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 03f83bcda5d1f8d8246bcc1afc603b7f74d0626b)
Note that we keep on using the term "passphrase" although "password"
would be better. There are however so many occurance of this and
given it is a bike shedding topic we fix that in the PO files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_seckey_default_or_card): Lookup a missing public
key from the current card via LDAP.
* g10/call-dirmngr.c: Include keyserver-intetnal.h.
(gpg_dirmngr_ks_get): Rename arg quick into flags. Take care of the
new LDAP flag.
* g10/keyserver-internal.h (KEYSERVER_IMPORT_FLAG_QUICK): New.
Replace the use of the value 1 for the former quick arg.
(KEYSERVER_IMPORT_FLAG_LDAP): New.
* g10/keyserver.c (keyserver_get_chunk): Increase the reserved line
length.
* dirmngr/ks-action.c (ks_action_get): Add arg ldap_only.
* dirmngr/server.c (cmd_ks_get): Add option --ldap.
--
This change makes it easy to start working with gnupg: Just insert the
smartcard or token provided to you and the first time you sign a
message the public key associated with the current card will be
imported and everything is set without any configuration.
This works only with an LDAP directory because it can be expected that
the public key has been put into the LDAP during card personalization.
Of course an LDAP server needs to be configured; in a Windows AD
domain this can be a mere "keyserver ldap:///" in dirmngr.conf. Other
configured keyservers are ignored.
Requirements for the card driver: The $SIGNKEYID attribute must exists
and a query for the KEY-FPR attribute needs to return the OpenPGP
fingerprint for that key. This is currently supported for OpenPGP
cards and certain PKCS#15 cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oPrintPKARecords): Remove.
(opts): Remove --print-pka-records.
(main): Remove "pka-lookups","pka-trust-increase" and other PKA stuff.
* g10/options.h (EXPORT_DANE_FORMAT): Remove.
(VERIFY_PKA_LOOKUPS, VERIFY_PKA_TRUST_INCREASE): Remove.
(KEYSERVER_HONOR_PKA_RECORD): Remove.
* g10/packet.h (pka_info_t): Remove.
(PKT_signature): Remove flags.pka_tried and pka_info.
* g10/parse-packet.c (register_known_notation): Remove
"pka-address@gnupg.org".
* g10/pkclist.c (check_signatures_trust): Remove PKA stuff.
* g10/call-dirmngr.c (gpg_dirmngr_get_pka): Remove.
* g10/export.c (parse_export_options): Remove "export-pka".
(do_export): Adjust for this.
(write_keyblock_to_output): Ditto.
(do_export_stream): Ditto.
(print_pka_or_dane_records): Rename to ...
(print_dane_records): this and remove two args. Remove PKA printing.
* g10/free-packet.c (free_seckey_enc, cp_pka_info): Adjust for removed
pka_info field.
* g10/getkey.c (get_pubkey_byname): Make AKL_PKA a dummy.
* g10/keyserver.c: Remove "honor-pka-record".
(keyserver_import_pka): Remove.
* g10/mainproc.c (get_pka_address): Remove.
(pka_uri_from_sig): Remove.
(check_sig_and_print): Remove code for PKA.
--
PKA (Public Key Association) was a DNS based key discovery method
which looked up fingerprint by mail addresses in the DNS. This goes
back to the conference where DKIM was suggested to show that we
already had a better method for this available with PGP/MIME. PKA was
was later superseded by an experimental DANE method and is today not
anymore relevant. It is anyway doubtful whether PKA was ever widely
used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_gcrypt_is_compliant): New.
(gnupg_rng_is_compliant): Also check library version.
* g10/mainproc.c (proc_encrypted): Use new function.
(check_sig_and_print): Ditto.
* sm/decrypt.c (gpgsm_decrypt): Ditto.
* sm/encrypt.c (gpgsm_encrypt): Ditto.
* sm/verify.c (gpgsm_verify): Ditto
--
This will eventually allow us to declare Libgcrypt 1.9 to be de-vs
compliant. GnuPG can use this information then for its own checks.
As of now GnuPG tests the version of the used library but that is a
bit cumbersome to maintain.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_symkey_enc): Do not continue with an unknown
algorithm.
--
Trying to encrypt data created with
printf "\x8c\x49\x05\x0e\x0a\x03\x01"
fails in version 2.2.19 with
gpg: packet(3) with unknown version 5
but with later versions with
gpg: encrypted with unknown algorithm 14
gpg: Ohhhh jeeee: ... this is a bug \
([...]/passphrase.c:433:passphrase_to_dek)
so we better catch this case earlier.
Reported-by: Tavis Ormandy
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.h (PK_ALGO_FLAG_RSAPSS): New.
* common/compliance.c (gnupg_pk_is_compliant): Add arg alog_flags and
test rsaPSS. Adjust all callers.
(gnupg_pk_is_allowed): Ditto.
* sm/misc.c (gpgsm_ksba_cms_get_sig_val): New wrapper function.
(gpgsm_get_hash_algo_from_sigval): New.
* sm/certcheck.c (gpgsm_check_cms_signature): Change type of sigval
arg. Add arg pkalgoflags. Use the PK_ALGO_FLAG_RSAPSS.
* sm/verify.c (gpgsm_verify): Use the new wrapper and new fucntion to
also get the algo flags. Pass algo flags along.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (check_sig_and_print): Add failsafe check for PK.
Pass KEYBLOCK down do check_signatures_trust. Protect existsing error
ocde in case the signature expired.
* g10/pkclist.c (is_in_sender_list): New.
(check_signatures_trust): Add args keyblock and pk. Add new uid based
checking code.
* g10/test-stubs.c, g10/gpgv.c: Adjust stubs.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): New options --auto-key-import,
--no-auto-key-import, and --no-include-key-block.
(gpgconf_list): Add them.
* g10/options.h (opt): Add field flags.auto_key_import.
* g10/mainproc.c (check_sig_and_print): Use flag to enable that
feature.
* tools/gpgconf-comp.c: Give the new options a Basic config level.
--
Note that the --no variants of the options are intended for easy
disabling at the command line.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (read_key_from_file): Rename to ...
(read_key_from_file_or_buffer): this and add new parameters. Adjust
callers.
(import_included_key_block): New.
* g10/packet.h (PKT_signature): Add field flags.key_block.
* g10/parse-packet.c (parse_signature): Set that flags.
* g10/sig-check.c (check_signature2): Add parm forced_pk and change
all callers.
* g10/mainproc.c (do_check_sig): Ditto.
(check_sig_and_print): Try the included key block if no key is
available.
--
This is is the second part to support the new Key Block subpacket.
The idea is that after having received a signed mail, it is instantly
possible to reply encrypted - without the need for any centralized
infrastructure.
There is one case where this does not work: A signed mail is received
using a specified signer ID (e.g. using gpg --sender option) and the
key block with only that user ID is thus imported. The next time a
mail is received using the same key but with a different user ID; the
signatures checks out using the key imported the last time. However,
the new user id is not imported. Now when trying to reply to that
last mail, no key will be found. We need to see whether we can update
a key in such a case.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (enum_sig_subpkt): Replace first arg by two args
so that the entire signature packet is available. Change all callers.
(parse_sig_subpkt): Ditto.
--
This patch is a prerequisite to support the new attestation key
signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Report status of STATUS_NO_SECKEY
only when some error occurred.
--
Fixes-commit: 6cc4119ec03be61c78189a0bec99372035289b91
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/dek.h (DEK): Use debugger friendly type of unsigned int.
* g10/mainproc.c (symkey_decrypt_seskey): Add another check.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (proc_encrypted): Only call get_session_key when
PKENC_LIST is not NULL.
Return GPG_ERR_BAD_KEY, instead of GPG_ERR_NO_SECKEY, when
it's encrypted only by symmetric key.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (check_sig_and_print): Print a hint on how to make
use of the preferred keyserver. Remove keyserver lookup just by the
keyid. Try a WKD lookup before a keyserver lookup.
--
The use of the the keyid for lookups does not make much sense anymore
since for quite some time we do have the fingerprint as part of the
signature.
GnuPG-bug-id: 4595
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Check ->result against -1.
When c->dek == NULL, put GPG_ERR_NO_SECKEY only when not set.
* g10/pubkey-enc.c (get_session_key): Set k->result by the result of
get_it.
When no secret key is available for some reasons, return the last
specific error, if any.
GnuPG-bug-id: 4561
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (print_pkenc_list): Simplify.
--
This changes the output from
# ------------------------ >8 ------------------------
gpg: encrypted with 2048-bit RSA key, ID D20073D46DF6C97D, created 2019-04-02
"Test with PIV card"
to
gpg: encrypted with rsa2048 key, ID D20073D46DF6C97D, created 2019-04-02
"Test with PIV card"
Signed-off-by: Werner Koch <wk@gnupg.org>
# ------------------------ 8< ------------------------
* g10/build-packet.c (gpg_mpi_write): New optional arg
R_NWRITTEN. Allow NULL for OUT. Change all callers.
(do_key): Support v5 keys.
(build_sig_subpkt_from_sig): Support 32 byte fingerprints.
* g10/parse-packet.c (parse_signature): First try to set the keyid
from the issuer fingerprint.
(parse_key): Support v5 keys.
(create_gpg_control): Better make sure to always allocate the static
size of the struct in case future compilers print warnings.
* g10/keyid.c (hash_public_key): Add v5 support.
(keyid_from_pk): Ditto.
(keyid_from_fingerprint): Ditto.
(fingerprint_from_pk): Ditto.
* g10/keygen.c (KEYGEN_FLAG_CREATE_V5_KEY): New.
(pVERSION, pSUBVERSION): New.
(add_feature_v5): New.
(keygen_upd_std_prefs): Call it.
(do_create_from_keygrip): Add arg keygen_flags and support the v5
flag.
(common_gen): Support the v5 flag.
(parse_key_parameter_part): New flags v4 and v5.
(parse_key_parameter_string): Add args for version and subversion.
(read_parameter_file): New keywords "Key-Version" and
"Subkey-Version".
(quickgen_set_para): Add arg 'version'.
(quick_generate_keypair, generate_keypair): Support version parms.
(do_generate_keypair): Support v5 key flag.
(generate_subkeypair): Ditto.
(generate_card_subkeypair): Preparse for keyflags.
(gen_card_key): Ditto.
* g10/sig-check.c (check_signature2): Add args extrahash and
extrahashlen.
(check_signature_end): Ditto.
(check_signature_end_simple): Ditto. Use them.
* g10/mainproc.c (proc_plaintext): Put extra hash infor into the
control packet.
(do_check_sig): Add args extrahas and extrahashlen and pass them on.
(issuer_fpr_raw): Support 32 byte fingerprint.
(check_sig_and_print): get extra hash data and pass it on.
--
Note that this is only basic support and requires more fine
tuning/fixing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (mainproc_context): New member
'seen_pkt_encrypted_aead'.
(release_list): Clear 'seen_pkt_encrypted_aead'.
(proc_encrypted): Set 'seen_pkt_encrypted_aead'.
(have_seen_pkt_encrypted_aead): New.
(proc_plaintext): Do not enable extra hash contexts when decryption
AEAD input.
--
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/mainproc.c (struct mainproc_context): It's now pubkey_enc_list.
(do_proc_packets): Remove the first arg CTRL. Fix call of
proc_pubkey_enc.
(release_list): Handle pubkey_enc_list.
(proc_pubkey_enc): Remove the first arg CTRL. Simply put the packet
to pubkey_enc_list.
(print_pkenc_list): Remove the last arg FAILED.
(proc_encrypted): Only call print_pkenc_list once.
Handle DEK here.
(proc_packets, proc_signature_packets, proc_signature_packets_by_fd)
(proc_encryption_packets): Fix call of do_proc_packets.
* g10/packet.h (struct pubkey_enc_list): Define.
* g10/pubkey-enc.c (get_it): Change the second argument K.
(get_session_key): Select session key by LIST, using enum_secret_keys.
* g10/gpgv.c (get_session_key): Change the second argument K.
* g10/test-stubs.c (get_session_key): Likewise.
--
Collect all PKT_PUBKEY_ENC packets, and then, process the
PKT_ENCRYPTED* packet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (get_pubkey_for_sig): New.
(get_pubkeyblock_for_sig): New.
* g10/mainproc.c (issuer_fpr_raw): Give global scope.
(check_sig_and_print): Use get_pubkeyblock_for_sig.
* g10/pkclist.c (check_signatures_trust): Use get_pubkey_for_sig.
* g10/sig-check.c (check_signature2): Ditto.
(check_signature_over_key_or_uid): Ditto.
--
GnuPG-bug-id: 4046
The whole getkey stuff is still a mess with way to much duplication
and missing caching of already fetched data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_plaintext): Sanitize verbose output.
--
This fixes a forgotten sanitation of user supplied data in a verbose
mode diagnostic. The mention CVE is about using this to inject
status-fd lines into the stderr output. Other harm good as well be
done. Note that GPGME based applications are not affected because
GPGME does not fold status output into stderr.
CVE-id: CVE-2018-12020
GnuPG-bug-id: 4012
* g10/mainproc.c (proc_encrypted): Print warning and later force an
error.
--
Note that when this error is triggered the plaintext from the literal
data packet has already been outputted before the BEGIN_DECRYPTION
status line. We fail only later to get more information. Callers
need to check and act upon the decryption error code anyway.
Thanks to Marcus for pointing out this case.
GnuPG-bug-id: 4000
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_pubkey_enc): Remove a comment.
--
GnuPG always uses the OpenPGP algo number in its status report.
We can find a function in GPGME, it's _gpgme_map_pk_algo.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (proc_encrypted): Print a hint for legacy ciphers w/o
MDC. Also print a dedicated status error code
Signed-off-by: Werner Koch <wk@gnupg.org>
