* common/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
Commit 91b826a388 was not enough to
avoid all sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that once and for
all almost all uses of "<< 24" and "<< 8" are changed by this patch to
use an inline function from host2net.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyring.c (keyring_get_keyblock): Whitelist allowed packet
types.
* g10/keydb.c (parse_keyblock_image): Ditto.
--
The keyring DB code did not reject packets which don't belong into a
keyring. If for example the keyblock contains a literal data packet
it is expected that the processing code stops at the data packet and
reads from the input stream which is referenced from the data packets.
Obviously the keyring processing code does not and cannot do that.
However, when exporting this messes up the IOBUF and leads to an
invalid read of sizeof (int).
We now skip all packets which are not allowed in a keyring.
Reported-by: Hanno Böck <hanno@hboeck.de>
Test data:
gpg2 --no-default-keyring --keyring FILE --export >/dev/null
With this unpacked data for FILE:
-----BEGIN PGP ARMORED FILE-----
mI0EVNP2zQEEALvETPVDCJDBXkegF4esiV1fqlne40yJnCmJeDEJYocwFPXfFA86
sSGjInzgDbpbC9gQPwq91Qe9x3Vy81CkyVonPOejhINlzfpzqAAa3A6viJccZTwt
DJ8E/I9jg53sbYW8q+VgfLn1hlggH/XQRT0HkXMP5y9ClURYnTsNwJhXABEBAAGs
CXRlc3QgdGVzdIi5BBMBCgAjBQJU0/bNAhsDBwsJCAcDAgEGFQgCCQoLBBYCAwEC
HgECF4AACgkQlsmuCapsqYLvtQP/byY0tM0Lc3moftbHQZ2eHj9ykLjsCjeMDfPx
kZUUtUS3HQaqgZLZOeqPjM7XgGh5hJsd9pfhmRWJ0x+iGB47XQNpRTtdLBV/WMCS
l5z3uW7e9Md7QVUVuSlJnBgQHTS6EgP8JQadPkAiF+jgpJZXP+gFs2j3gobS0qUF
eyTtxs+wAgAD
=uIt9
-----END PGP ARMORED FILE-----
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (write_fake_data): Take care of a NULL stored as
opaque MPI.
--
Reported-by: Hanno Böck <hanno@hboeck.de>
Test data:
gpg2 --no-default-keyring --keyring FILE --export
With this unpacked data for FILE:
-----BEGIN PGP ARMORED FILE-----
Version: GnuPG v2
Comment: Use "gpg --dearmor" for unpacking
mI0EGRkZGRkZGRkZGRkZGRkBGRkZGRkZGRkZGRkZGQAZGRkZGRkZGRkZGRkZGRkZ
GRkZInzgDbpa/9gQ4wq9////f3Vy81CkyVq3HQaqgZLZOeqPjM7XgGh5hJvAkpec
9wAAAgDHe0FVFbkppJZXP+gFs6z3gobS0qUFeyTtxs+wAgAD
=JDFT
-----END PGP ARMORED FILE-----
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.w32-manifest.in: New.
* g10/gpg-w32info.rc: Add manifest.
* g10/Makefile.am (EXTRA_DIST): Add manifest.
(gpg-w32info.o): Depend on manifest.
* configure.ac (BUILD_VERSION): New.
(AC_CONFIG_FILES): Add manifest.
--
There are no dependencies yet defined - we need to do this for the
libs first.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (MAX_KEY_PACKET_LENGTH): New.
(MAX_UID_PACKET_LENGTH): New.
(MAX_COMMENT_PACKET_LENGTH): New.
(MAX_ATTR_PACKET_LENGTH): New.
(parse_key): Limit the size of a key packet to 256k.
(parse_user_id): Use macro for the packet size limit.
(parse_attribute): Ditto.
(parse_comment): Ditto.
--
Without that it is possible to force gpg to allocate large amounts of
memory by using a bad encoded MPI. This would be an too easy DoS.
Another way to mitigate would be to change the MPI read function to
allocate memory dynamically while reading the MPI. However, that
complicates and possibly slows down the code. A too large key packet
is in any case a sign for broken data and thus gpg should not use it.
Reported-by: Hanno Böck
GnuPG-bug-id: 1823
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (list_config): Replace print_sanitized_string2 by
es_write_sanitized.
* common/stringhelp.c (print_sanitized_buffer2): Remove.
(print_sanitized_buffer, print_sanitized_utf8_buffer): Remove.
(print_sanitized_utf8_buffer, print_sanitized_utf8_string): Remove.
(print_sanitized_string): Remove.
* sm/certdump.c (print_dn_part, print_dn_parts): Remove arg FP.
(pretty_print_sexp, gpgsm_print_name2, gpgsm_print_name): Remove.
--
Mixing stdio and estream is never a good idea. This fix also allows
us to remove a lot of garbage.
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
GnuPG-bug-id: 1822
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_search_first, keydb_search_next): Skip legacy
keys.
* g10/keyring.c (keyring_get_keyblock): Handle GPG_ERR_LEGACY_KEY.
(prepare_search): Ditto.
(keyring_rebuild_cache): Skip legacy keys.
* g10/keyserver.c (keyidlist): Ditto.
* g10/trustdb.c (validate_key_list): Ditto.
--
This is not the most elegant way to handle it but it reduces the
chance for unwanted side effects.
GnuPG-bug-id: 1816
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.h (g10_errstr): Remove macro and change all occurrences by
gpg_strerror.
(G10ERR_): Remove all macros and change all occurrences by their
GPG_ERR_ counterparts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c: Include shareddefs.h.
(quick_generate_keypair): Support static passphrase.
(get_parameter_passphrase): New.
(do_generate_keypair): Use it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Fix order of args.
--
That bug has been here since the beginning. The entire function needs
a review or be be moved to Libgcrypt.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (GPG_ERR_OBJ_TERM_STATE): New.
* scd/iso7816.c (map_sw): Add this error code.
* scd/app-openpgp.c (do_getattr): Return the life cycle indicator.
* scd/app.c (select_application): Allow a return value of
GPG_ERR_OBJ_TERM_STATE.
* scd/scdaemon.c (set_debug): Print the DBG_READER value.
* g10/call-agent.c (start_agent): Print a status line for the
termination state.
(agent_scd_learn): Make arg "info" optional.
(agent_scd_apdu): New.
* g10/card-util.c (send_apdu): New.
(factory_reset): New.
(card_edit): Add command factory-reset.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (pct_expando): Reorder conditions for clarity.
* g10/sign.c (write_signature_packets): Fix notation data creation.
--
Also re-added the check for signature version > 3.
Reported-by: MFPA
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_learn): Add option --sendinfo.
* agent/learncard.c (agent_handle_learn): Add arg "send" andsend
certifciate only if that is set.
* g10/call-agent.c (agent_scd_learn): Use --sendinfo. Make INFO
optional.
(agent_learn): Remove.
* g10/keygen.c (gen_card_key): Replace agent_learn by agent_scd_learn.
--
The requirement of using --card-status on the first use of card on a
new box is a bit annoying but the alternative of always checking
whether a card is available before a decryption starts does not sound
promising either.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (can_handle_critical): Check content length
before calling can_handle_critical_notation.
--
The problem was found by Jan Bee and gniibe proposed the used fix.
Thanks.
This bug can't be exploited: Only if the announced length of the
notation is 21 or 32 a memcmp against fixed strings using that length
would be done. The compared data is followed by the actual signature
and thus it is highly likely that not even read of unallocated memory
will happen. Nevertheless such a bug needs to be fixed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Remove keyserver_options.other.
* g10/gpg.c (main): Obsolete option --honor-http-proxt.
* g10/keyserver.c (add_canonical_option): Replace by ...
(warn_kshelper_option): New.
(parse_keyserver_uri): Obsolete "x-broken-http".
--
Some of these options are deprecated for 10 years and they do not make
any sense without the keyserver helpers. For one we print a hint on
how to replace it:
gpg: keyserver option 'ca-cert-file' is obsolete; \
please use 'hkp-cacert' in dirmngr.conf
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import): Skip too large keys.
* kbx/keybox-file.c (IMAGELEN_LIMIT): Change limit from 2MB to 5MB.
--
The key which triggered the problem was 0x57930DAB0B86B067. With this
patch it can be imported. Keys larger than the now increased limit of
5MB will are skipped and the already existing not_imported counter is
bumped up.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (decrypt_data): Return an error code instead of
calling BUG().
--
This code path can be triggered by fuzzing gpg and thus with some
likeness also by corrupt messages for other reasons.
* g10/parse-packet.c (dump_sig_subpkt): Print regex subpacket
sanitized.
--
We may not use "%s" to print an arbitrary buffer. At least "%.*s"
should have been used. However, it is in general preferable to escape
control characters while printf user data.
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_attribute_subpkts): Check that the
attribute packet is large enough for the subpacket type.
--
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (get_parameter_algo): Map ECC algorithm strings
directly.
--
Interactive generation of the keys uses the OpenPGP algorithms numbers
but batch generation allows the use of strings.
Reported-by: Gaetan Bisson.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (stats_s): Add field v3keys.
(import): Update this field.
(import_print_stats): Print v3 key count.
(read_block): Skip v3 keys and return a count for them.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (sign_file): Use DSA or ECDSA and not DSA|EdDSA.
--
This error was introduced with
commit b7f8dec632
while separating EdDSA from ECDSA.
Found due to a related bug report from Brian Minton.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/openfile.c (open_sigfile): Factor some code out to ...
(get_matching_datafile): new function.
* g10/plaintext.c (hash_datafiles): Do not try to find matching file
in batch mode.
* g10/mainproc.c (check_sig_and_print): Print a warning if a possibly
matching data file is not used by a standard signatures.
--
Allowing to use the abbreviated form for detached signatures is a long
standing bug which has only been noticed by the public with the
release of 2.1.0. :-(
What we do is to remove the ability to check detached signature in
--batch using the one file abbreviated mode. This should exhibit
problems in scripts which use this insecure practice. We also print a
warning if a matching data file exists but was not considered because
the detached signature was actually a standard signature:
gpgv: Good signature from "Werner Koch (dist sig)"
gpgv: WARNING: not a detached signature; \
file 'gnupg-2.1.0.tar.bz2' was NOT verified!
We can only print a warning because it is possible that a standard
signature is indeed to be verified but by coincidence a file with a
matching name is stored alongside the standard signature.
Reported-by: Simon Nicolussi (to gnupg-users on Nov 7)
Signed-off-by: Werner Koch <wk@gnupg.org>
