* scd/apdu.c (apdu_strerror): Add missing status codes.
* scd/command.c (cmd_getinfo): New sub-command apdu_strerror.
--
This is quite handy for gpg-card's APDU command and avoids that we
need to duplicate the mapping table or put it into a shared file.
* scd/app.c (app_dump_state): Also print the refcount.
(maybe_switch_app): Make sure the app exists on the card.
--
When switching the current card and the card does not support the same
apps as the former, we now reset the app to the first one.
Testcase is to use a standard OpenPGP card and a P15 card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (is_same_serialno): New.
(check_application_conflict): Use this.
(select_application): Ditto.
(app_switch_current_card): Ditto.
* scd/app-openpgp.c (check_keyidstr): Ignore the card version and also
compare case insensitive.
--
This is required because we change what we emit as serialno of OpenPGP
cards but existing keys still use the old form of the serial
number (i.e. with a firmware version).
See-commit: 3a8250c02031080c6c8eebd5dea03f5f87f9ddd7
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_read_binary_ext): Add optional arg r_sw and
change callers.
(iso7816_read_record): Factor all code out to ...
(iso7816_read_record_ext): new.
* scd/app-p15.c (select_and_read_binary): Fallback to record reading.
(read_ef_aodf): Clear EOF error.
* scd/app.c (app_new_register): Call app_munge_serialno for Yubikeys.
(app_munge_serialno): Handle Yubikey serial numbers.
(card_get_serialno): Remove special Yubikey treatment. Drop arg
is_canonical.
(app_get_serialno): Clear ERRNO on error.
(card_get_dispserialno): New. Also change formatting of Yubikey and
OpenPGP numbers to match those printed on the card.
(app_get_dispserialno): New.
* scd/app-openpgp.c (do_getattr): Use app_get_dispserialno.
(yubikey_get_serialno): Remove.
* scd/app-piv.c (get_dispserialno): Remove.
(do_getattr): Use app_get_dispserialno.
--
This patch gets us back to a unique serial number for cards and
provides a stable serial number as printed for Yubikeys.
Because we use a slightly different serial number now for Yubikeys and
cards only supporting OpenPGP card we need to come up with another
change so that the version number of OpenPGP serial numbers are
ignored when comparing card serial numbers. This is so that existing
stub keys of gpg-agent will continue to work.
GnuPG-bug-id: 5100
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (get_revision_from_blurb): Fix detection of empty
string.
(gpgconf_versions): Print ksba revision.
--
The latest Libksba version support retrieving of the revision (commit)
id. We now use that or print a question mark.
Signed-off-by: Werner Koch <wk@gnupg.org>
* acinclude.m4 (GNUPG_CHECK_ENDIAN): Use AC_COMPILE_IFELSE instead of
AC_TRY_COMPILE. Use AC_RUN_IFELSE instead of AC_TRY_RUN.
(GNUPG_BUILD_PROGRAM): Use AS_HELP_STRING instead of AC_HELP_STRING.
* configure.ac: Use AC_USE_SYSTEM_EXTENSIONS instead of AC_GNU_SOURCE.
Use AS_HELP_STRING instead of AC_HELP_STRING.
(AC_ISC_POSIX): Replace by AC_SEARCH_LIBS.
(AC_TYPE_SIGNAL): Remove.
* m4/isc-posix.m4: Remove.
* m4/codeset.m4: Update from gnulib.
* m4/gettext.m4: Update from gnulib.
* m4/lcmessage.m4: Update from gnulib.
* m4/socklen.m4: Update from gnulib.
* m4/ldap.m4: Use AS_HELP_STRING instead of AC_HELP_STRING.
Use AC_LINK_IFELSE instead of AC_TRY_LINK.
Use AC_RUN_IFELSE instead of AC_TRY_RUN.
* m4/gpg-error.m4: Update from libgpg-error.
* m4/readline.m4: Update from libgpg-error.
* m4/npth.m4: Update from npth.
* m4/libassuan.m4: Update from libassuan.
* m4/libgcrypt.m4: Update from libgcrypt.
* m4/ksba.m4: Update from libksba.
* m4/ntbtls.m4: Update from ntbtls.
* common/signal.c [!HAVE_DOSISH_SYSTEM] (init_one_signal): Replace
RETSIGTYPE to void.
[!HAVE_DOSISH_SYSTEM] (got_fatal_signal, got_usr_signal): Likewise.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keydb.h (pref_hint): Change from union to struct and add field
'exact'. Adjust callers.
* g10/pkclist.c (algo_available): Take care of the exact hint.
* g10/sign.c (sign_file): Rework the hash detection from
recipient prefs.
--
This fixes a encrypt+sign case like: One recipient key has SHA512 as
highest ranked hash preference but the the signing key is a 256 bit
curve. Because we don't want to use a truncated hash with ECDSA, we
need to have an exact match - this is in particular important for
smartcard which check that the hash matches the curves.
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported-from-stable: aeed0b93ff660fe271d8f98f8d5ce60aa5bf3ebe
* tools/gpgconf.c (main): Use gnupg_homedir instead of
default_homedir. Check for existance of the directory.
--
Fixes-commit: 7d95f2e7e7a09e3d433d449b117e3470f9dd38c7
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_apdu): Add more pseudo APDUs.
* tools/card-misc.c (send_apdu): Handle them.
* tools/gpg-card.c (cmd_factoryreset): Use lock commands.
--
This is port of the code used with gpg-card-edit. Note that the
command "apdu" now also understands some extra keywords.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (reset_notify): Add option --keep-lock.
(do_reset): Add arg keep_lock.
(cmd_lock): Send progress status.
* g10/call-agent.c (agent_scd_apdu): Add more pseudo APDUs.
* g10/card-util.c (send_apdu): Ditto.
(factory_reset): Use lock commands.
--
This is required so that for example Kleopatra does not detect the
RESET and issues a SERIALNO of its own, thus conflicting with our
SERIALNO undefined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (print_digest_rejected_note): Do not print in quiet mode.
(print_sha1_keysig_rejected_note): Ditto.
--
GnuPG-bug-id: 4893
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (generate_pin): Use STRING random which is
sufficient for a passphrase.
(inq_cb): s/rc/err/. Do not print two errors in case generate_pin
fails. Lowercase strings as per GNU standards.
(setup_genpin): Fix translation test.
(setup_qualitybar): Ditto.
--
Our policy is to use VERY_STRONG for a long term public key but not
for symmetric keys.
The GNU standards to demand that strings start with a lowercase
because that seems to be needed if it follows a prefix of for example
"gpg:". I don't actually like this becuase we need different strings
in interactive and standard mode but the majory of strings in GnuPGare
written this way. If a translation is necessary it can be done with
an en_GB or so locale.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (agent_get_passphrase): Setup genpin.
(do_getpin): Update with new name for inquire callback.
(inq_quality): Rename to inq_cb and add genpin support.
(inq_cb): Renamed form inq_quality.
(generate_pin): New helper to generate a pin.
(agent_askpin): Fix some typos.
(setup_genpin): Provide new strings for pinentry.
--
This implements the gpg-agent side for generating a pin
especially for symmetric encryption using libgcrypt randomness
and checking it against the gpg-agent constraints.
* common/status.h (STATUS_CANCELED_BY_USER): New.
* g10/passphrase.c (passphrase_to_dek): Send STATUS_CANCELED_BY_USER
instead of STATUS_MISSING_PASSPHRASE when canceled is set.
--
This is to prevent further pinentry tries when the pinentry is canceled
by the user during symmetric decryption.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
* scd/apdu.c (apdu_send_direct): Use lock_slot.
--
With trylock_slot, it may return SW_HOST_BUSY. This may occur when
apdu_get_status is called by scd_update_reader_status_file.
Simply using lock_slot is much easier for user of apdu_send_direct.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (ccid_require_get_status): For VENDOR_SCM reader,
return 0 only at the initial call.
(bulk_in): Don't detect an error for VENDOR_SCM reader, just kicking
the loop, to invoke scd_update_reader_status_file, which calls
ccid_slot_status again.
(ccid_slot_status): Move the call of ccid_vendor_specific_setup to...
(ccid_get_atr): ... here.
--
For readers with interrupt transfer support, it is only intr_cb which
sets handle->powered_off to 1. Keeping this condition makes no race.
The function ccid_slot_status can also detect a communication error,
which causes apdu_close_reader (but not setting ->powered_off).
GnuPG-bug-id: 5121
Fixes-commit: 920f258eb6018ecec1d63bad6a0fb0772f72affa
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* doc/examples/vsnfd.prf: Rename to VS-NfD.prf.
* doc/examples/Automatic.prf: New.
* doc/Makefile.am (examples): Adjust.
* build-aux/speedo/w32/inst.nsi: Install gpg-check-pattern.exe and 3
example files.
* build-aux/speedo/w32/wixlib.wxs: Add new files.
--
Note that we renamed the existing example profile so that kleopatra
shows a nicer name. In fact the gpg4win installer just copies of
theses file but it is better to maintain them here.
gpg-check-pattern.exe can no be installed because we meanwhile have a
regex lib which works also on Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (main) <aApplyDefaults, aApplyProfile>: Create the
standard home directory.
--
This fixes a regression due to the fix for
GnuPG-bug-id: 4867
Before that change gpgsm implictly created the homedir while options
were collected. It is important to have this so that a login script
can create config files for new users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/openfile.c (try_make_homedir): Move core of the code to ...
* common/homedir.c (gnupg_maybe_make_homedir): new.
* sm/keydb.c (try_make_homedir): Implement using new function.
* common/homedir.c: Include i18n.h.
* po/POTFILES.in: Add common/homedir.c.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (get_default_pinentry_name): Try ../bin/pinentry.exe
--
In an installation layout where GnuPG is installed as a component
of another software it might be useful to have pinentry placed
in a different bin directory without the forced folder name of
Gpg4win.
(cherry picked from commit b4cb91d5fbe2b8917d76d12eb72aaac0d97ed596)
* tools/Makefile.am (gpgconf-w32): New target. Builds gpgconf with
subsystem windows.
* build-aux/speedo/w32/wixlib.wxs: Package it.
--
This allows us to create scripts that call gpgconf without opening
a console. Using subsystem windows is better then to just close
the console after start as it avoids the console flashing up.
(cherry picked from commit c366e04958481382c3f7b50f169120053186069b)
* common/gettime.c: Include locale.h.
(asctimestamp): Increase buffer. On Windows use setlocale.
--
GnuPG-bug-id: 5073
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (set_compliance_option): For AES256 and SHA256 in de-vs
mode.
* g10/encrypt.c (setup_symkey): Add extra compliance check.
(encrypt_simple): Avoid printing a second error oncplinace failure.
--
Because we used the RFC4880 mode as base for the de-vs mode we got
3DES as symmetric encryption algorithm. With the default gnupg mode
that was already used. The new extra compliance checks are added to
detect whether a --personal-cipher-preference or --cipher-algo option
tried to override the algorithms. They are still possible but now
non-compliant algorithms will throw an error.
Manual testing can be done with commands like this:
gpg --no-options --compliance=de-vs \
--personal-cipher-preferences "S1 S7" \
--pinentry-mode loopback -v --passphrase abc -ac </etc/motd
Here the command fails due to IDEA (S1) being the preferred cipher
algorithm. Using "--s2k-digest-algo SHA1" instead of
--personal-cipher-preferences will also fail.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (pct_expando): Catch special case of the empty string.
Also map a NULL to the empty string.
* g10/photoid.c (show_photos): Make an empty string used as command
fail.
--
This patch also fixes a segv when calling gpg wrongly like
gpg -N \-foo@example.org
GnuPG-bug-id: 5117
Signed-off-by: Werner Koch <wk@gnupg.org>
