* scd/apdu.c (get_status_reader): Add ON_WIRE arg, here.
(ct_get_status, pcsc_get_status_direct, pcsc_get_status_wrapped)
(pcsc_get_status, get_status_ccid, my_rapdu_get_status): Likewise.
(reset_pcsc_reader_wrapped, open_pcsc_reader_wrapped): Follow the
change.
(apdu_get_status_internal): It's lower-level driver which judge
it's not needed. Otherwise, it can't detect the removal.
* scd/ccid-driver.c (ccid_slot_status): After the POWERED_OFF check,
we can skip sending GetSlotStatus packet on wire, when no need.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Fixes-commit: c8eee4d396a751d41fd1ee1e1b87b851fca172a
* scd/ccid-driver.c (do_close_reader): Don't lock events, but check the
return value of libusb_cancel_transfer.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-common.h (struct app_ctx_s): Rename field to
periodical_check_needed.
* scd/scdaemon.c (update_usb): Rename from update_fdset_for_usb.
Don't use libusb_get_pollfds any more.
(scd_kick_the_loop): New.
(need_tick): Follow the rename.
(handle_connections): No libusb event handling here.
* scd/app.c (app_new_register): Follow the change of rename.
(select_application, scd_update_reader_status_file): Likewise.
* scd/ccid-driver.c (ccid_usb_thread_is_alive): New.
(intr_cb): Call scd_kick_the_loop.
(ccid_usb_thread): New. Thread to invoke INTERRUPT callback.
(ccid_open_usb_reader): Add thread invocation.
(ccid_require_get_status): Remove
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP.
(do_close_reader): Carefully handle handle->transfer.
(get_escaped_usb_string): Insert npth_unprotect/npth_protect.
(do_close_reader, bulk_out, bulk_in, abort_cmd, ccid_slot_status)
(ccid_transceive, ccid_transceive_secure): Likewise.
--
It found that libusb_get_pollfds is not supported on Windows.
Besides, it's a bit difficult to use for the select loop.
Thus, we use the thread named ccid_usb_thread, instead.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c(struct reader_table_s): Add require_get_status.
(apdu_connect): Change return value meaning. Call apdu_reset here.
* scd/app.c (app_new_register): Add require_get_status.
(select_application): Use the return value of apdu_connect.
(scd_update_reader_status_file): Call update_fdset_for_usb with
checking all_have_intr_endp.
(app_list_start, app_list_finish): Remove.
* scd/ccid-driver.c (struct ccid_driver_s): Add transfer.
(intr_cb): Don't call libusb_transfer in this callback.
(ccid_require_get_status): New.
(do_close_reader): Call libusb_transfer here.
* scd/scdaemon.c (update_fdset_for_usb): Remove the first argument.
--
With Gnuk Token, it works fine as expected. With Gemalto reader,
intr_cb is not called when card is removed. So, the macro
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP is not defined yet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (update_fdset_for_usb): Wake up the select(2).
(handle_connections): Use a kind of "self-pipe" technique.
--
Use pipe to wake up select(2). If UNIX-only, signal could be used. For
portability, "self-pipe" is better, here. Setup for non-blocking for
pipe fds are not needed, because speed of USB device insertion is
limited by human physical interaction; No one can do hundreds of
device insertion/removal-s per second.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keyring.c (compare_name): Fix KEYDB_SEARCH_MODE_MAIL* searches
in keyrings when the UID is a plain addr-spec.
--
Previously, 'gpg --list-key "<foo@example.org>"' failed if 1/ the
keyring format is used and 2/ the key's UID is a plain addr-spec
(cf. RFC2822 section 4.3), e.g. 'foo@example.org'.
GnuPG-bug-id: 2930
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgme/gpgme-defs.scm: Use our fake pinentry, and configure it
to supply the correct passphrase.
--
Previously, the GPGME tests used the fake pinentry distributed with
GPGME which is a Bourne shell script. Use the fake pinentry from
GnuPG instead.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgsm/verify.scm: Use 'call-with-binary-output-file' to avoid
automatic line-ending conversion.
--
Previously, Windows' automatic line-ending conversion turned '\n' into
'\r\n' when writing the sample to a file, making the signature
invalid.
Signed-off-by: Justus Winter <justus@g10code.com>
* agent/cache.c (agent_store_cache_hit): Make sure the update is
atomic.
--
Previously, the function freed the last key, and duplicated the new
key after doing that. There is a chance, however, that calling the
allocator surrenders control to a different thread, causing a double
free if a different thread also calls this function.
To make sure the update is atomic under the non-preemptive thread
model, we must make sure not to surrender control to a different
thread. Therefore, we avoid calling the allocator during the
update.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgme/wrap.scm: Skip tests that are not built.
--
Previously, all tests from GPGME's test suite that were not built
(e.g. because GPGME was not configured with QT) were marked as
failures.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgme/run-tests.scm: Qualify the test with the executable
extension.
--
Previously, the test suite could not locate the test executables on
Windows because the Windows-specific file extension was missing.
Signed-off-by: Justus Winter <justus@g10code.com>
* dirmngr/ks-engine-hkp.c (tor_not_running_p): New.
(map_host): Call that to print a warning.
(handle_send_request_error): Ditto and avoid marking the host dead.
Also print a tor_config_problem warning. Add arg CTRL; adjust callers
to pass that new arg.
* g10/call-dirmngr.c (ks_status_cb): Detect and print the new
warnings.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/http.c (connect_server): Change to return an gpg_error_t
and to store socket at the passed address.
(http_raw_connect, send_request): Adjust accordingly.
--
This change removes cruft from the code and allows to return the error
code from the name lookup.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-connect-agent.c (main): Use a gpgrt_stream_t for
'script_fp'. Adapt accordingly.
--
Werner asked me to make gpgconf use the platform abstractions that
were introduced after gpgconf's inception. After doing that, I
realized that 'read_line' is only used in two more places, one of
which this patch takes care of.
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (retrieve_options_from_file): Use a
gpgrt_stream_t for 'list_file'. Adapt accordingly.
(copy_file): Likewise for 'src' and 'dst'.
(change_options_file): Likewise for 'src_file' and 'dest_file'.
(change_options_program): Likewise for 'src_file' and 'dest_file'.
(gc_process_gpgconf_conf): Likewise for 'config'.
--
Werner asked me to make gpgconf use the platform abstractions that
were introduced after gpgconf's inception.
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (gc_component_change_options): Use
'gnupg_rename_file'. Also, block signals across all renames in an
attempt to make the whole process atomic.
--
Werner asked me to make gpgconf use the platform abstractions that
were introduced after gpgconf's inception.
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (change_options_file): Add comments explaining
the functions parameters.
(change_options_program): Likewise.
--
From reading those two functions it is not clear why we write the new
configuration to the source file, and read the current configuration
from the destination file. The identifiers are named for the benefit
of the callee.
Note that identifiers that require that much explanation are poorly
chosen.
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (gp_component_change_options): Improve error
handling when reading from stdin.
--
Previously, errors encountered while reading the configuration changes
were ignored.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/Makefile.am (XTESTS): Add new test.
* tests/openpgp/issue2929.scm: New file.
--
This test demonstrates a problem with the TOFU trust model when a new
key is created.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/Makefile.am (XTESTS): Re-add gpgconf.scm.
--
This partially reverts 25e0298238.
That change was not sufficiently motivated, and our continuous
integration server shows no recent distcheck failures.
Signed-off-by: Justus Winter <justus@g10code.com>
* Makefile.am (DISTCHECK_CONFIGURE_FLAGS): Also test gpgtar and
wks-tools. Disable ntbtls.
* tests/openpgp/Makefile.am (XTESTS): Temporary remove gpgconf.scm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/logging.c (do_logv): Remove extra parentheses in comparison.
* dirmngr/dns-stuff.c (resolve_addr_libdns): Init RES so that
dns_res_close is given a defined value in the error case.
* dirmngr/http.c (cookie_read, cookie_write) [HTTP_USE_NTBTLS]: Fix
format string char.
* dirmngr/ks-engine-hkp.c (ks_hkp_help): Remove duplicate "const".
* dirmngr/ks-engine-http.c (ks_http_help): Ditto.
* dirmngr/ks-engine-kdns.c (ks_kdns_help): Ditto.
* dirmngr/ks-engine-ldap.c (ks_ldap_help): Ditto.
* scd/app-p15.c (send_keypairinfo, do_getattr): Fix format string
char.
* tools/gpgconf-comp.c (gpg_agent_runtime_change): Init PID for the
error case.
(scdaemon_runtime_change): Ditto.
(dirmngr_runtime_change): Ditto.
* tools/gpgconf.c (query_swdb): Init VALUE_SIZE_UL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns.c (dns_nssconf_loadfile): Skip negation terms in
nsswitch.conf parser.
--
This small patch was submitted along with this comment:
We've been having issues over at Arch Linux with the new libdns
code. Our /etc/nsswitch.conf contains the following line:
hosts: files mymachines resolve [!UNAVAIL=return] dns myhostname
And it turns out dirmngr fails to parse the negation statement (the
bang in !UNAVAIL). This results in gnupg not being able to resolve
any name.
Looking at dirmngr/dns.c it was unclear to me how to properly handle
such negations. The dns_anyconf_scan calls used in
dns_nssconf_loadfile do not allow to store a negation bit easily...
In the meantime, I wrote the attached patch which ignores those
statements altogether. It makes libdns work as expected for us.
Commit log written by wk
* dirmngr/dns-stuff.c (libdns_init): Fallback to files,dns.
--
Signed-off-by: Phil Pennock <phil@pennock-tech.com>
ChangeLog entry by wk.
This fixed the problem:
Short version: macOS doesn't include /etc/nsswitch.conf and GnuPG's
dirmngr is hard-erroring when that file is missing, such that no DNS
operations succeed and --recv-key returns ENOENT type errors to the
caller.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/trustdb.c (check_regexp): Correctly print whether the
regexp matched or not.
--
This patch fixes the log message displayed when gpg attempts to
match the regexp associated with a trust signature with an user ID.
The current message interprets the 'ret' variable backwards, and
displays 'YES' when the regexp actually fails to match.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
--
Justus reported that the German translation for the key listing in
--edit-key does "usage: E" -> "Aufruf: E" which is clearly wrong. It
turnd out that this translation was once marked as fuzzy and
accidentally unfuzzied by me.
"Aufruf" (bug) -> "Nutzung"
"Leistungsfähigkeit" -> "Nutzung"
"Signaturfähigkeit" -> "Signaturnutzbarkeit" etc.
The last two are in the key generation menu. Also changed the key
code for "Umschalten der Signaturnutzbarkeit" from "U" to "S".
"Nutzung" is here better than "Fähigkeit" because the latter is more
connected to the property of the algorithm, where the former better
expresses an arbitrary choice.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c (parse_export_options): Add "backup" and its alias
"export-backup".
(do_export_one_keyblock): Export ring trust packets in backup mode.
* g10/import.c (parse_import_options): Add "restore" and its alias
"import-restore".
(read_block): Import ring trust packets.
--
These options are intended to, well, backup and restore keys between
GnuPG implementations. These options may eventually be enhanced to
backup and restore all public key related information.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/exectool.c (my_error_from_errno): Remove.
(copy_buffer_do_copy): Do without var RC.
(copy_buffer_flush): Ditto. Use ERRNO instead of es_write return
code.
(gnupg_exec_tool): Correctly return errors from es_read.
--
Fixes-commit: 55c9212a23
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): If the parameter for --faked-system-time
ends with a '!', freeze time at the specified point.
* common/gettime.c (gnupg_set_time): Allow to freeze the time
at an arbitrary time instead of only the current time.
* doc/gpg.texi: Update documentation for --faked-system-time.
--
This patch allows the user to modify the behavior of the
--faked-system-time option: by appending a '!' to the parameter,
time in GnuPG will be frozen at the specified time, instead of
advancing normally from that time onward.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* common/exectool.c (my_error_from_errno): New.
(copy_buffer_do_copy): Use separate vars for errno values and
gpg-error values for clarity. s/assert/log_assert/.
(copy_buffer_flush): Ditto.
(gnupg_exec_tool_stream): Use gpg_err_code when testing.
--
NB: It is surprising that es_write seems not to set ERRNO but only
returns the ERRNO value. Need to check whether this is really the
case.
Signed-off-by: Werner Koch <wk@gnupg.org>
