* g10/sign.c (sign_file): Use log_printf instead of stderr.
* g10/tdbdump.c (export_ownertrust): Use estream fucntions.
(import_ownertrust): Ditto.
* g10/tdbio.c (tdbio_dump_record): Ditto. Change arg to estream_t.
--
Reported-by: Guilhem Moulin <guilhem@fripost.org>
Needed for unattended key edits with --status-fd, because since 2.1
status prompts are preceded by es_fflush (in cpr.c:do_get_from_fd)
not fflush(3), so the standard output may not be flushed before each
prompt. (Which breaks scripts using select(2) to multiplex between
the standard and status outputs.)
His patch only affected print_and_check_one_sig_colon() but there are
many more places where stdio and estream are mixed. This patch now
replaces most of them in g10/. At some places stdio is still used,
but that is local to a function and should not have side effects.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
Commit 91b826a388 was not enough to
avoid all sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that once and for
all almost all uses of "<< 24" and "<< 8" are changed by this patch to
use an inline function from host2net.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.h (g10_errstr): Remove macro and change all occurrences by
gpg_strerror.
(G10ERR_): Remove all macros and change all occurrences by their
GPG_ERR_ counterparts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (pct_expando): Reorder conditions for clarity.
* g10/sign.c (write_signature_packets): Fix notation data creation.
--
Also re-added the check for signature version > 3.
Reported-by: MFPA
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Pass option names to obsolete_option without
double dash.
* g10/misc.c (obsolete_option, obsolete_scdaemon_option): Print double
dash only for command line options.
* g10/gpg.c: Add config options that should belong in scdaemon.conf
* g10/main.h, g10/misc.c (obsolete_scdaemon_option): New.
--
In gpg2, the following options are only relevant for scdaemon:
reader-port
ctapi-driver
pcsc-driver
disable-ccid
but in gpg1, they are options for gpg itself.
Some users of gpg1 might have these options in their
~/.gnupg/gpg.conf, which causes gpg2 to fail hard if it reads that
config file.
gpg2 should not fail hard, though giving a warning (and suggesting a
move to scdaemon.conf) seems OK.
This patch does *not* reintroduce any documentation for these options
in gpg.texi, even to indicate that they are "dummy" options, since
scdaemon.texi contains the appropriate documentation.
Debian-bug-id: 762844
- Program names factored out from obsolete_scdaemon_option to make
reuse without new translations easier. -wk
* g10/sig-check.c (do_check): Move some code to ...
* g10/misc.c (print_md5_rejected_note): new function.
* g10/mainproc.c (proc_tree, proc_plaintext): Enable MD5 workaround
only if option --allow-weak-digest-algos is used.
* g10/gpg.c (oRFC1991, oPGP2): Remove
(opts): Remove --pgp2 and --rfc1991.
* g10/options.h (CO_PGP2, CO_RFC1991): Remove. Remove all users.
(RFC2440, PGP2): Remove. Remove all code only enabled by these
conditions.
* tests/openpgp/clearsig.test: Remove --rfc1991 test.
--
The use of PGP 2.c is considered insecure for quite some time
now (e.g. due to the use of MD5). Thus we remove all support for
_creating_ PGP 2 compatible messages.
* g10/gpg.c (aQuickKeygen): New.
* g10/misc.c (is_valid_user_id): New stub.
* g10/keygen.c (quickgen_set_para): New.
(quick_generate_keypair): New.
--
Note that the validation of the specified user id has not yet been
implemented.
* g10/keyid.c (hash_public_key): Take care of NULL keys.
* g10/misc.c (pubkey_nbits): Ditto.
--
This problem was mainly due to our ECC code while checking for opaque
MPIs with the curve name.
* g10/photoid.c (show_photos): Set namehash.
* g10/misc.c (pct_expando): Add "%U" expando.
--
This makes is possible to extract all photos ids from a key to
different files.
* acinclude.m4 (GNUPG_GPG_DISABLE_ALGO): New.
* configure.ac: Add --enable-gpg-* options to disable non MUS
algorithms.
* g10/misc.c (map_cipher_openpgp_to_gcry): Implement these options.
(openpgp_pk_test_algo2): Ditto.
(map_md_openpgp_to_gcry): Ditto.
(openpgp_cipher_test_algo, openpgp_md_test_algo): Simplify.
--
We have a similar feature in GnuPG-1. Although we don't shrink the
size of the gpg binary by disabling algorithms (they are implemented
in Libgcrypt), this feature may still be useful for inerop testing.
* g10/misc.c (openpgp_pk_algo_name): Return a different string for
each ECC algorithm.
* g10/gpg.c (build_list_pk_test_algo): New wrapper to cope with the
different algo type enums.
(build_list_pk_algo_name): Ditto.
(build_list_cipher_test_algo): Ditto.
(build_list_cipher_algo_name): Ditto.
(build_list_md_test_algo): Ditto.
(build_list_md_algo_name): Ditto.
(my_strusage): Use them.
(list_config): Ditto. Add "pubkeyname".
(build_list): Add letter==1 hack.
* g10/misc.c (print_pubkey_algo_note): Use enum typedef for the arg.
(print_cipher_algo_note): Ditto.
(print_digest_algo_note): Ditto.
(map_md_openpgp_to_gcry): New.
(openpgp_md_test_algo): Rewrite.
(openpgp_md_algo_name): Rewrite to do without Libgcrypt.
* g10/cpr.c (write_status_begin_signing): Remove hardwired list of
algo ranges.
* g10/misc.c (map_cipher_openpgp_to_gcry): Use explicit mapping and
use enums for the arg and return value.
(map_cipher_gcry_to_openpgp): Ditto.
(openpgp_cipher_blocklen): Use constant macros.
(openpgp_cipher_test_algo): Use mapping function and prepare to
disable algorithms.
(openpgp_cipher_algo_name): Do not use Libgcrypt.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Replace
CGRY_CIPHER_* by CIPHER_ALGO_*.
* common/openpgpdefs.h (cipher_algo_t): Remove unused
CIPHER_ALGO_DUMMY.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sexputil.c (get_pk_algo_from_canon_sexp): Change to return a
string.
* g10/keygen.c (check_keygrip): Adjust for change.
* sm/certreqgen-ui.c (check_keygrip): Likewise.
* agent/pksign.c (do_encode_dsa): Remove bogus map_pk_openpgp_to_gcry.
* g10/misc.c (map_pk_openpgp_to_gcry): Remove.
(openpgp_pk_test_algo): Change to a wrapper for openpgp_pk_test_algo2.
(openpgp_pk_test_algo2): Rewrite.
(openpgp_pk_algo_usage, pubkey_nbits): Add support for EdDSA.
(openpgp_pk_algo_name): Rewrite to remove need for gcry calls.
(pubkey_get_npkey, pubkey_get_nskey): Ditto.
(pubkey_get_nsig, pubkey_get_nenc): Ditto.
* g10/keygen.c(do_create_from_keygrip): Support EdDSA.
(common_gen, gen_ecc, ask_keysize, generate_keypair): Ditto.
* g10/build-packet.c (do_key): Ditto.
* g10/export.c (transfer_format_to_openpgp): Ditto.
* g10/getkey.c (cache_public_key): Ditto.
* g10/import.c (transfer_secret_keys): Ditto.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Ditto.
* g10/mainproc.c (proc_pubkey_enc): Ditto.
* g10/parse-packet.c (parse_key): Ditto,
* g10/sign.c (hash_for, sign_file, make_keysig_packet): Ditto.
* g10/keyserver.c (print_keyrec): Use openpgp_pk_algo_name.
* g10/pkglue.c (pk_verify, pk_encrypt, pk_check_secret_key): Use only
OpenPGP algo ids and support EdDSA.
* g10/pubkey-enc.c (get_it): Use only OpenPGP algo ids.
* g10/seskey.c (encode_md_value): Ditto.
--
This patch separates Libgcrypt and OpenPGP public key algorithms ids
and in most cases completely removes the Libgcrypt ones. This is
useful because for Libgcrypt we specify the algorithm in the
S-expressions and the public key ids are not anymore needed.
This patch also adds some support for PUBKEY_ALGO_EDDSA which will
eventually be used instead of merging EdDSA with ECDSA. As of now an
experimental algorithm id is used but the plan is to write an I-D so
that we can get a new id from the IETF. Note that EdDSA (Ed25519)
does not yet work and that more changes are required.
The ECC support is still broken right now. Needs to be fixed.
Signed-off-by: Werner Koch <wk@gnupg.org>
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
* g10/keygen.c (keygen_set_std_prefs): Include IDEA only in PGP2
compatibility mode.
* g10/misc.c (idea_cipher_warn): Remove. Also remove all callers.
* common/status.h (STATUS_RSA_OR_IDEA): Remove. Do not emit this
status anymore.
--
To keep the number of actually used algorithms low, we want to support
IDEA only in a basically read-only way (unless --pgp2 is used during
key generation). It does not make sense to suggest the use of this
old 64 bit blocksize algorithm. However, there is old data available
where it might be helpful to have IDEA available.
* g10/misc.c (pubkey_get_npkey, pubkey_get_nskey)
(pubkey_get_nsig, pubkey_get_nenc): Map all RSA algo ids to
GCRY_PK_RSA.
--
The problem is that Libgcrypt has no more support for the alternate
RSA ids and thus if asking for the number of parameters, they will
return zero. Now, this leads to packing the key parameters into an
opaque MPI but because the algorithm id is actually known to GPG, it
assumes valid RSA parameters.
An example key with RSA_S is 0x5434509D.
Changed order of some conditional to make to put the special case into
the true branch. Indentation changes. Minor other changes to make the
ECC code more similar to the rest of our code.
It builds but many sefltests still fail. Need to fix that before
using it with an ECDH enabled libgcrypt.
[/]
2011-01-21 Werner Koch <wk@g10code.com>
* configure.ac: Need Libgcrypt 1.4.6 due to AESWRAP.
(HAVE_GCRY_PK_ECDH): Add new test.
[agent/]
2011-01-21 Werner Koch <wk@g10code.com>
* cvt-openpgp.c (GCRY_PK_ECDH) [!HAVE_GCRY_PK_ECDH]: New.
[include/]
2011-01-21 Werner Koch <wk@g10code.com>
* cipher.h (GCRY_PK_USAGE_CERT): Remove compatibility macros
because we now require libgcrypt 1.4.6.
(GCRY_PK_ECDH): Add replacement.
The following works:
gpg2 --gen-key (ECC)
gpg2 --list-keys
gpg2 --list-packets ~/.gnupg/pubring.gpg
gpg2 --list-packets <private key from http://sites.google.com/site/brainhub/pgpecckeys>
ECDH doesn't work yet as the code must be re-written to adjust for gpg-agent refactoring.
* configure.ac: Remove Camellia restriction.
* gpg.c (main), misc.c (openpgp_cipher_test_algo): Remove Camellia
restriction.
* misc.c (map_cipher_openpgp_to_gcry), main.h: Add macros for
openpgp_cipher_open, openpgp_cipher_get_algo_keylen, and
openpgp_cipher_get_algo_blklen to wrap around the corresponding gcry_*
functions, but pass the algorithm number through
map_cipher_openpgp_to_gcry. This is needed in case the gcry algorithm
number doesn't match the OpenPGP number (c.f. Camellia).
* encr-data.c, pubkey-enc.c, mainproc.c, cipher.c, encode.c, seskey.c,
passphrase.c, seckey-cert.c: Use new openpgp_cipher_* macros here.
(list_keyblock_print), pkclist.c (do_edit_ownertrust), keyedit.c
(menu_showphoto), photoid.c (generate_photo_id, show_photos), misc.c
(pct_expando): Add %v and %V expandos so that displaying photo IDs can
show the attribute validity tag (%v) and string (%V). Originally by
Daniel Gillmor.
doc/
* com-certs.pem: Added the current root certifcates of D-Trust and
S-Trust.
g10/
* status.c (write_status_begin_signing): New.
* sign.c (sign_file, sign_symencrypt_file): Call it.
* textfilter.c (copy_clearsig_text): Call it.
* call-agent.c (agent_scd_pksign): Pass --hash-rmd160 to SCD if
required.
* gpg.c (main): Let --no-use-agent and --gpg-agent-info print a
warning.
* misc.c (obsolete_option): New.
char * vs. unsigned char * warnings. The GNU coding standards used to
say that these mismatches are okay and better than a bunch of casts.
Obviously this has changed now.
* misc.c (openpgp_pk_algo_usage): Allow AUTH where SIGN is allowed.
* keygen.c (ask_passphrase): No need to allocated S2K in secure
memory.
* scdaemon.c (main): --pcsc-driver again defaults to pcsclite.
David Corcoran was so kind to remove the GPL incompatible
advertisng clause from pcsclite.
* apdu.c (apdu_open_reader): Actually make pcsc-driver option work.
to libgcrypt functions, using shared error codes from libgpg-error,
replacing the old functions we used to have in ../util by those in
../jnlib and ../common, renaming the malloc functions and a couple of
types. Note, that not all changes are listed below becuause they are
too similar and done at far too many places. As of today the code
builds using the current libgcrypt from CVS but it is very unlikely
that it actually works.
* misc.c (checksum_u16_nobug): Removed.
(checksum_u16): Removed the bug emulation.
(checksum_mpi): Ditto.
(checksum_mpi_counted_nbits): Removed and replaced all calls
with checksum_mpi.
* parse-packet.c (read_protected_v3_mpi): New.
(parse_key): Use it here to store it as an opaque MPI.
* seckey-cert.c (do_check): Changed the v3 unprotection to the new
why to store these keys.
(protect_secret_key): Likewise.
* build-packet.c (do_secret_key): And changed the writing.
restarting gpg. This is Debian bug 124219, though their supplied patch
will not do the right thing.
* main.h, tdbio.c (tdbio_set_dbname), misc.c (removed check_permissions),
keydb.c (keydb_add_resource), g10.c (main, check_permissions): Significant
reworking of the permission check mechanism. The new behavior is to check
everything in the homedir by checking the homedir itself. If the user
wants to put (possibly shared) keyrings outside the homedir, they are not
checked. The options file and any extension files are checked wherever
they are, as well as their enclosing directories. This is Debian bug
147760.
