* tests/openpgp/decrypt-sym.scm: New.
* tests/openpgp/samplemsgs/enc-sym-cfb-1.asc: New.
* tests/openpgp/samplemsgs/enc-sym-cfb-2.asc: New.
* tests/openpgp/samplemsgs/enc-sym-ocb-1.asc: New.
* tests/openpgp/samplemsgs/enc-sym-ocb-2.asc: New.
--
It's time to have some OCB tests in our suite so that we don't forget
to run the tests from our RNP interop tests. Also adds new tests for
CFB messages.
* common/homedir.c (unix_rootdir): Add ".enable" statement to
gpgconf.ctl
* tests/gpgconf.ctl.in: Use this statement.
* tests/cms/Makefile.am (OLD_TESTS_ENVIRONMENT): Enable .enable.
(TESTS_ENVIRONMENT): Ditto.
* tests/gpgme/Makefile.am (TESTS_ENVIRONMENT): Ditto.
* tests/migrations/Makefile.am (TESTS_ENVIRONMENT): Ditto.
* tests/openpgp/Makefile.am (TESTS_ENVIRONMENT): Ditto.
* tests/pkits/Makefile.am (TESTS_ENVIRONMENT): Ditto.
* tests/tpm2dtests/Makefile.am (TESTS_ENVIRONMENT): Ditto.
--
Without that it was required to delete the gpgconf.ctl to run manual
tests.
What a hack.
* g10/keyedit.c (find_userid_by_namehash, find_userid): Add argument
want_valid. Skip invalid user IDs if valid is wanted.
(keyedit_quick_revuid): Ask find_userid() for any matching user ID.
(keyedit_quick_set_primary): Use find_userid() to find the user ID to
mark as primary.
* tests/openpgp/quick-key-manipulation.scm: Change second call of the
quick-set-primary-uid test to specify the user ID by its hash.
--
This makes it possible to specify the user ID to mark as primary via its
UID hash when calling --quick-set-primary-uid.
GnuPG-bug-id: 6126
* g10/keyedit.c (find_userid_by_namehash, find_userid): New.
(keyedit_quick_revuid): Use find_userid() instead of iterating over the
nodes of the keyblock.
* tests/openpgp/quick-key-manipulation.scm: Add test for revoking a
user ID specified by its hash.
--
This makes it possible to specify the user ID to revoke as UID hash when
calling --quick-revoke-uid.
GnuPG-bug-id: 5936
* tests/gpgscm/init.scm (*exit-status*): New.
(exit): Set *exit-status*.
* tests/gpgscm/tests.scm (mkdtemp-autoremove): Check
exit-status and only remove the directory if not zero.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* Makefile.am (all-local): New to setup symlinks.
(distclean-local): New.
* tests/Makefile.am: Remove the gpgconf related targets. Just keep
gpgconf.ctl.in in EXTRA_DIST
* tests/cms/Makefile.am (GNUPG_BUILD_ROOT):
* tests/gpgme/Makefile.am (GPGSCM_PATH):
* tests/openpgp/Makefile.am (GNUPG_BUILD_ROOT):
* tests/pkits/Makefile.am (GNUPG_BUILD_ROOT):
* tests/tpm2dtests/defs.scm (tools): Revert to the former values.
* tests/openpgp/defs.scm (tools): Ditto.
--
This
Fixes-commit: 399ebf6d873d4178c1d527aa4df34bf16a76360e
Fixes-commit: 84fcd8e6eb7e0786399e1f6461c3f60b0db2d070
because we ran into problems with the idea of first doing a
test-install for the checks. "make distcheck" turned out to
be too problematic. Symlinks are a better way of doing this.
Also fixes
GnuPG-bug-id: 5634
* tests/openpgp/defs.scm: We expect that stuff is now installed.
(tools): Fix the names.
(intsalled?, bin-prefix): Remove.
(tool-hardcoded): Simplify.
(gpg-conf'): Simplify.
(GNUPG_BUILDDIR): Do not anymore set this envvar.
* tests/tpm2dtests/defs.scm: Ditto.
--
This simplifies things a bit.
* tests/gpgconf.ctl.in: New.
* tests/Makefile.am (EXTRA_DIST): Add new file.
(TESTINST_DIRS): New.
(clean-local): New.
(clean-local-testinst): New.
(check-recursive): New hook.
(bin/gpgconf.ctl): Run a test install.
* tests/cms/Makefile.am (TESTS_ENVIRONMENT): Set new envvar
GNUPG_BUILD_ROOT.
* tests/gpgme/Makefile.am (TESTS_ENVIRONMENT): Ditto.
* tests/openpgp/Makefile.am (TESTS_ENVIRONMENT): Ditto.
* tests/pkits/Makefile.am (TESTS_ENVIRONMENT): Ditto.
* tests/tpm2dtests/Makefile.am (TESTS_ENVIRONMENT): Ditto.
--
Right now this helps only with the global configuraion dir which is
now not set and thus the build host'ss own /etc/gnupg does not anymore
affect the build.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_cipher_is_allowed): Allow GCM for gpgsm
in decrypt mode.
* tests/cms/samplemsgs/pwri-sample.gcm.p7m: Remove duplicated authtag
--
We allow GCM in de-vs mode for decryption although this has not been
evaluation. It is decryption and thus no serious harm may happen.
* tests/cms/samplemsgs/: Add sample messages.
* sm/gpgsm.c (main): Use gpgrt_fcancel on decryption error.
* sm/decrypt.c (decrypt_gcm_filter): New.
(gpgsm_decrypt): Use this filter if requested. Check authtag.
--
Note that the sample message pwri-sample.gcm.p7m is broken: The
authtag is duplicated to the authEncryptedContentInfo. I used a
temporary code during testing hack to that test message out.
* common/comopt.c, common/comopt.h: New.
* common/Makefile.am: Add them.
* g10/gpg.c: Include comopt.h.
(main): Also parse common.conf.
* sm/gpgsm.c: Include comopt.h.
(main): Set a flag for the --no-logfile option. Parse common.conf.
* tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add
pseudo option "use_keyboxd".
(known_pseudo_options_gpg): Add pseudo option "use_keyboxd".
(known_options_gpgsm): Remove "use-keyboxd".
* tests/openpgp/defs.scm (create-gpghome): Create common.conf.
* doc/examples/common.conf: New.
--
Note that --use-keybox still works but prints a warning. We will
eventually remove this option becuase it was marked as an experimental
feature anyway.
It would be too confusing if gpg and gpgsm use different key storages.
Further, other components (e.g. dirmngr or gpg-wks-client) which call
gpg or gpgsm need to be aware that the keyboxd is used and pass that
option on the command line. Now that common.conf is always read (even
if --no-options is used) those tools will work instantly.
* tests/tpm2dtests/start_sw_tpm.sh: New.
* tests/tpm2dtests/Makefile.am: Add.
--
This accidentally got left out of the initial commit for testing
6720f1343 ("tpm2d: add tests for the tpm2daemon")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Added to Makefile and wrote tiny ChangeLog.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Detect TPM emulator and enable tests.
* tests/tpm2dtests/: New test suite.
* tests/Makefile.am: Run tests.
--
Add a set of tests that exercise tpm2daemon handling of keys and
verify compatibility with non-tpm based keys.
Running this test infrastructure requires a tpm emulator, which is
tested for during configuration. If an emulator is not found, the
tests won't be run since they require the presence of a TPM (although
the TPM handling code will still be built).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
- Fixed tests/Makefile.am for make distcheck.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: New option --allow-old-cipher-algos.
(set_compliance_option): Set --rfc4880bis explictly to SHA256 and
AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440.
* g10/options.h (opt): Add flags.allow_old_cipher_algos.
* g10/misc.c (print_sha1_keysig_rejected_note): Always print the note
unless in --quiet mode.
* g10/encrypt.c (setup_symkey): Disallow by default algos with a
blocklengt < 128.
(encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES.
* g10/pkclist.c (algo_available): Take care of old cipher also.
(select_algo_from_prefs): Use AES as implicit algorithm by default.
* tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos.
--
GnuPG-bug-id: 3415
* tests/openpgp/all-tests.scm (all-tests): Replace extended-key-format
mode with a new keyboxd mode.
* tests/openpgp/defs.scm (create-gpghome): Ditto.
* tests/openpgp/gpgv.scm: Adjust for keyboxd mode.
* tests/openpgp/issue2419.scm: Fix to allow setting a log-file into
gpg.conf for debugging.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/defs.scm (pipe:gpg): Remove stray dash.
--
The extra dash is problematic at export and import because this does
not export a single key as intended by the tests but does two key
lookups where the second fails because that userid is always "-". For
the current keyring and keybox code this does not matter because it is
ignored. The keyboxd code however is more picky and returns an error.
Fixes-commit: 9609cb20e4caee739b9fc4fd36797029d2970041
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Take care: Running under valgrind takes loooong and in some case you
may run into an valgrind internal error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/main.c: Switch to the new option parser.
* common/argparse.c, common/argparse.h: Remove.
* common/init.c (_init_common_subsystems): Do not call obsolete func.
* common/Makefile.am (common_sources): Remove those files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/keydb.h (struct kbnode_struct): Replace unused field RECNO by
new field TAG.
* g10/kbnode.c (alloc_node): Change accordingly.
* g10/import.c (import_one): Add arg r_valid.
(sec_to_pub_keyblock): Set tags.
(resync_sec_with_pub_keyblock): New.
(import_secret_one): Change return code to gpg_error_t. Return an
error code if sec_to_pub_keyblock failed. Resync secret keyblock.
--
When importing an invalid secret key ring for example without key
binding signatures or no UIDs, gpg used to let gpg-agent store the
secret keys anyway. This is clearly a bug because the diagnostics
before claimed that for example the subkeys have been skipped.
Importing the secret key parameters then anyway is surprising in
particular because a gpg -k does not show the key. After importing
the public key the secret keys suddenly showed up.
This changes the behaviour of
GnuPG-bug-id: 4392
to me more consistent but is not a solution to the actual bug.
Caution: The ecc.scm test now fails because two of the sample keys
don't have binding signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* gpgscm/scheme.c (gc_reservation_failure): Fix adding ";".
[!NDEBUG] (scheme_init_custom_alloc): Don't init seserved_lineno.
--
Picked from libgpg-error commit of:
8a9397896fd202dcfb3fb46259e43bc05a0ddd2e
In some build environment, NDEBUG is defined (although it's
bad practice). This change supports such a situation.
GnuPG-bug-id: 3959
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/defs.scm: Add "disable-scdaemon". Remove
"scdaemon-program".
* tests/gpgme/gpgme-defs.scm, tests/gpgsm/gpgsm-defs.scm: Likewise.
* tests/inittests, tests/pkits/inittests: Add "disable-scdaemon"
--
Before this change, running "make check" accesses USB device by
scdaemon on host computer. If there is any smartcard/token available,
it may affect test results. Because default key choice depends on
smartcard/token availability now and existing tests have nothing about
testing smartcard/token, disabling scdaemon is good.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
