* g10/getkey.c (get_best_pubkey_byname): Set new.uid always
to NULL after use.
--
pubkey_cmp is not guranteed to set new.uid.
So if the diff < 0 case is reached best is set to new.
If then diff > 0 is reached without modifying new.uid
e.g. if the key has no matching mboxes. new.uid is
free'd even though the uid is still referenced in
best.
GnuPG-Bug-Id: T4462
* g10/objcache.c: New.
* g10/objcache.h: New.
* g10/Makefile.am (common_source): Add them.
* g10/gpg.c: Include objcache.h.
(g10_exit): Call objcache_dump_stats.
* g10/getkey.c: Include objcache.h.
(get_primary_uid, release_keyid_list): Remove.
(cache_user_id): Remove.
(finish_lookup): Call the new cache_put_keyblock instead of
cache_user_id.
(get_user_id_string): Remove code for mode 2.
(get_user_id): Implement using cache_get_uid_bykid.
--
This generic caching module is better than the ad-hoc code we used in
getkey.c. More cleanup in getkey is still required but it is a
start. There is also a small performance increase with the new cache:
With a large keyring and --list-sigs I get these numbers:
| | before | after |
|------+------------+------------|
| real | 14m1.028s | 12m16.186s |
| user | 2m18.484s | 1m36.040s |
| sys | 11m42.420s | 10m40.044s |
Note the speedup in the user time which is due to the improved cache
algorithm. This is obvious, because the old cache was just a long
linked list; the new cache are two hash tables.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (struct keyid_list): Add field fprlen.
(cache_user_id): Set and test it.
(get_user_id_byfpr): Make static, add arg fprlen and use it.
(get_user_id_byfpr_native): Add arg fprlen and change all callers.
--
This was a regression in the 2.3 base.
GnuPG-bug-id: 3801
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR16)
(KEYDB_SEARCH_MODE_FPR20, KEYDB_SEARCH_MODE_FPR32): Remove. Switch
all users to KEYDB_SEARCH_MODE_FPR along with the fprlen value.
--
These search modes were added over time and there has until recently
be no incentive to remove the cruft. With the change for v5 keys I
finally went over all places and allowed the generic fingerprint mode
along with a given length of the fingerprint at all places.
Consequently the other modes can now be removed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/userids.c (classify_user_id): Support 32 byte fingerprints.
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR32): New.
(struct keydb_search_desc): Add field fprlen.
* kbx/keybox-defs.h (struct _keybox_openpgp_key_info): Add field
version and increase size of fpr to 32.
* kbx/keybox-blob.c: Define new version 2 for PGP and X509 blobs.
(struct keyboxblob_key): Add field fprlen and increase size of fpr.
(pgp_create_key_part_single): Allow larger fingerprints.
(create_blob_header): Implement blob version 2 and add arg want_fpr32.
(_keybox_create_openpgp_blob): Detect the need for blob version 2.
* kbx/keybox-search.c (blob_get_first_keyid): Support 32 byte
fingerprints.
(blob_cmp_fpr): Ditto.
(blob_cmp_fpr_part): Ditto.
(has_fingerprint): Add arg fprlen and pass on.
(keybox_search): Support KEYDB_SEARCH_MODE_FPR32 and adjust for
changed has_fingerprint.
* kbx/keybox-openpgp.c (parse_key): Support version 5 keys.
* kbx/keybox-dump.c (_keybox_dump_blob): Support blob version 2.
* g10/delkey.c (do_delete_key): Support KEYDB_SEARCH_MODE_FPR32.
* g10/export.c (exact_subkey_match_p): Ditto.
* g10/gpg.c (main): Ditto.
* g10/getkey.c (get_pubkey_byfprint): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
* g10/keydb.c (keydb_search_desc_dump): Support
KEYDB_SEARCH_MODE_FPR32 and adjust for changed KEYDB_SEARCH_MODE_FPR.
(keydb_search): Add new arg fprlen and change all callers.
* g10/keyedit.c (find_by_primary_fpr): Ditto.
* g10/keyid.c (keystr_from_desc): Ditto.
* g10/keyring.c (keyring_search): Ditto.
* g10/keyserver.c (print_keyrec): Ditto.
(parse_keyrec): Ditto.
(keyserver_export): Ditto.
(keyserver_retrieval_screener): Ditto.
(keyserver_import): Ditto.
(keyserver_import_fprint): Ditto.
(keyidlist): Ditto.
(keyserver_get_chunk): Ditto.
* g10/keydb.c (keydb_search): Add new arg fprlen and change all
callers.
* sm/keydb.c (keydb_search_fpr): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
--
This prepares the support for OpenPGP v5 keys. The new version 2 blob
format is needed for the longer fingerprints and we also use this
opportunity to prepare for storing the keygrip in the blob for faster
lookup by keygrip. Right now this is not yet functional.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (struct revocation_key): Add field 'fprlen'.
* g10/parse-packet.c (parse_revkeys): Set fprlen and allow for v5
keys. Also fix reading of unitialized data at place where
MAX_FINGERPRINT_LEN is used.
* g10/revoke.c (gen_desig_revoke): Allow for v5 keys and use fprlen.
Do an explicit compare to avoid reading unitialized data.
* g10/sig-check.c (check_revocation_keys): Use the fprlen.
* g10/getkey.c (merge_selfsigs_main): Do an explicit copy to avoid
reading unitialized data.
* g10/import.c (revocation_present): Use fprlen.
* g10/keyedit.c (show_key_with_all_names): Use fprlen.
(menu_addrevoker): Use fprlen. Allow for v5 keys.
* g10/keygen.c (keygen_add_revkey): Use fprlen.
(parse_revocation_key): Allow for v5 keys.
* g10/keyid.c (keyid_from_fingerprint): Allow for v5 keys. Print a
better error message in case of bogus fingerprints.
* g10/keylist.c (print_revokers): Use fprlen.
--
The reading of uninitialized data is harmless but we better fix it to
make valgrind happy. More serious was that we always passed
MAX_FINGERPRINT_LEN but we will need to support 20 and 32 octet
fingerprints and MAX_FINGERPRINT_LEN would be too large for a v4.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/mbox-util.c (mailbox_from_userid): Add arg subaddress and
implement. Change all callers to pass false for it.
* common/t-mbox-util.c (run_mbox_no_sub_test): New.
(run_filter): Add arg no_sub.
(main): Call new test and add option --no-sub.
--
Some stats: In the about 5300000 keys on the SKS servers we found 3055
unique mailboxes with a '+' in it. After removing leading and
trailing '+' as well as multiple '+' (e.g. "c++" or "foo+bar+baz")
2697 were left which seem to be valid sub-addresses.
To filter mailboxes out from a line delimited list with
user-ids (e.g. an SQL output), the command
t-mbox-util --verbose --filter
can be used; to output w/o sub-addresses add --no-sub.
GnuPG-bug-id: 4200
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (getkey_ctx_s): New field found_via_akl.
(get_pubkey_byname): Set it.
(only_expired_enc_subkeys): New.
(get_best_pubkey_byname): Add support to refresh expired keys from the
WKD.
--
A little drawback of that code is that if the WKD has no update for an
expired key each access of the key will trigger a WKD lookup (unless
cached by the dirmngr). To avoid this we need to record the last time
we have checked for an update but that would in turn require that we
update the keyring for each check. We defer this until we have a
better key database which allows for fast updates of meta data.
Testing the code is currently a bit cumbersome because it requires to
update a key in the WKD several times. Eventually we we need a
network emulation layer to provide sample data for the regression
tests.
GnuPG-bug-id: 2917
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (enum_secret_keys): Move to...
* g10/skclist.c (enum_secret_keys): ... here.
--
The function enum_secret_keys is not used by gpgv.c, but it is in
getkey.c. Extending enum_secret_keys will require change of gpgv.c,
so moving the function to the file for gpg is better.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (enum_secret_keys): Fix comment for usage of
enum_secret_keys, following the previous change.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (enum_secret_keys): Collecting keys in the context,
check duplicate to make sure returning only unique keys.
* g10/pubkey-enc.c (get_session_key): Now, it's the responsibility of
enum_secret_keys to free keys.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (get_pubkey_for_sig): New.
(get_pubkeyblock_for_sig): New.
* g10/mainproc.c (issuer_fpr_raw): Give global scope.
(check_sig_and_print): Use get_pubkeyblock_for_sig.
* g10/pkclist.c (check_signatures_trust): Use get_pubkey_for_sig.
* g10/sig-check.c (check_signature2): Ditto.
(check_signature_over_key_or_uid): Ditto.
--
GnuPG-bug-id: 4046
The whole getkey stuff is still a mess with way to much duplication
and missing caching of already fetched data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Make --pgp6 an alias for --pgp7.
* common/compliance.h (gnupg_compliance_mode): Remove CO_PGP6.
* g10/options.h (PGP6): Remove. Adjust all users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_user_id_string): Add arg R_NOUID. Change call
callers.
(get_user_id): Add arg R_NOUID. Change call callers.
* g10/mainproc.c (issuer_fpr_string): Make global.
* g10/keylist.c (list_keyblock_colon): Print a '?' for a missing key
also in --list-mode. Print the "issuer fpr" field also if there is an
issuer fingerprint subpacket.
--
Scripts used to rely on the "User ID not found" string even in the
--with-colons listing. However, that is not a good idea because that
string is subject to translations etc. Now we have an explicit way of
telling that a key is missing. For example:
gpg --list-sigs --with-colons | \
awk -F: '$1=="sig" && $2=="?" {if($13){print $13}else{print $5}}'
Prints all keyids or fingerprint of signing keys for which we do not
have the key in our local keyring.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (fixup_uidnode): Copy the AEAD prefs.
--
With this patch AEAD preferences are now properly created and
displayed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkeys): Do not use xmalloc.
--
We eventually need to get rid of all xmallocs so that gpg won't fail
easily when we make more use of the s server mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_handle): New field 'keep_lock'.
(keydb_release): Clear that flag.
(keydb_lock): New function.
(unlock_all): Skip if KEEP_LOCK is set.
* g10/getkey.c (get_keyblock_byfprint_fast): Call keep_lock if
requested.
--
That change is straightforward. It helps to avoid the race condition
that another gpg process inserts a key while the first process is
between the search and the insert.
A similar change is due for gpgsm.
Note that the key edit operations may still suffer from a race.
GnuPG-bug-id: 3446
* g10/getkey.c (get_pubkey_byfprint_fast): Factor most code out to ...
(get_keyblock_byfprint_fast): .. new function.
* g10/import.c (revocation_present): s/int rc/gpg_error_t err/.
(import_one): Use get_keyblock_byfprint_fast to get the keyblock and a
handle. Remove the now surplus keyblock fetch in the merge branch.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_handle): New field 'keep_lock'.
(keydb_release): Clear that flag.
(keydb_lock): New function.
(unlock_all): Skip if KEEP_LOCK is set.
* g10/getkey.c (get_keyblock_byfprint_fast): Call keep_lock if
requested.
--
That change is straightforward. It helps to avoid the race condition
that another gpg process inserts a key while the first process is
between the search and the insert.
A similar change is due for gpgsm.
Note that the key edit operations may still suffer from a race.
GnuPG-bug-id: 3446
* g10/getkey.c (get_pubkey_byfprint_fast): Factor most code out to ...
(get_keyblock_byfprint_fast): .. new function.
* g10/import.c (revocation_present): s/int rc/gpg_error_t err/.
(import_one): Use get_keyblock_byfprint_fast to get the keyblock and a
handle. Remove the now surplus keyblock fetch in the merge branch.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add KEYSERVER_AUTO_KEY_RETRIEVE to the default
keyserver options. Set the default for --auto-key-locate to
"local,wkd". Reset that default iff --auto-key-locate has been given
in the option file or in the commandline.
* g10/getkey.c (parse_auto_key_locate): Work on a copy of the arg.
--
GnuPG-bug-id: 3324
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_best_pubkey_byname): Change return type to
gpg_error_t. Use var name err instead of rc. Move a
gpg_error_from_syserror closer to the call.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_best_pubkey_byname): Init NEW.
--
We call free_user_id on NEW.uid and thus it needs to be initialized.
This fixes the ref-count or invisible segv bug from
GnuPG-bug-id: 3266
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (lookup): Return immediately on any other error than
GPG_ERR_NO_SECKEY from agent_probe_any_secret_key.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2204
* g10/getkey.c (getkey_end) [!W32]: Re-enable caching.
--
This change limits of the effects of commit
d3d640b9cc98dd0d06b49a2e4d46eb67af96fe29 to W32 system.
GnuPG-bug-id: 3097
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (getkey_end): Disable caching of the open keydb
handle.
--
This created a big regression for Windows because the keyring
is only released after the global ctrl is released. So if an operation
does a getkey and then tries to modify the keyring it will fail on
Windows with a sharing violation. We need to modify all
keyring write operations to also take the ctrl and close the
cached_getkey_kdb handle to make writing work. See:
https://dev.gnupg.org/T3097
GnuPG-Bug-Id: T3097
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* g10/call-agent.c (warn_version_mismatch): Revert.
(start_agent): Suppress version mismatch if relevant.
* g10/getkey.c (get_seckey_default_or_card): New.
* g10/skclist.c (build_sk_list): Use get_seckey_default_or_card.
--
The change of 97a2394, which prefers available card than default key
specified is too strong.
Fixes-commit: 97a2394ecafaa6f58e4a1f70ecfd04408dc15606
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keydb.h (KEYDB_HANDLE): Move typedef to ...
* g10/gpg.h: here.
(struct server_control_s): Add field 'cached_getkey_kdb'.
* g10/gpg.c (gpg_deinit_default_ctrl): Release that keydb handle.
* g10/getkey.c (getkey_end): Cache keydb handle.
(get_pubkey): Use cached keydb handle.
* kbx/keybox-search.c (keybox_search_reset): Use lseek instead of
closing the file.
--
Before this patch a "gpg --check-sigs" opened and closed the keybox
file for almost every signature check. By caching the keydb handle
and using lseek(2) this can be limited to just 2 times. This might
speed up things on Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
For proper operations as a server we need to avoid global variables.
Thus we need to pass the session state CTRL to most functions. Quite
a lot of changes but fortunately straightforward to do.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_best_pubkey_byname): Set released .UID to NULL.
--
Phil Pennock reported an assertion failure when doing
% gpg --auto-key-locate dane --locate-keys someone
gpg: Ohhhh jeeee: Assertion "uid->ref > 0" in \
free_user_id failed (free-packet.c:310)
on his keyring. This patch is not tested but a good guess.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (parse_auto_key_locate): Do not build parts depending
on USE_DNS_CERT.
--
This also removes USE_DNS_SRV from commented code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (getkey_next): Only ask 'lookup' for the exact match if
our caller requested the key. Fixes a crash in 'lookup'.
GnuPG-bug-id: 2848
Fixes-commit: 1d03cc77e1706f7da653153ad4b58c61e4fd2573
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/free-packet.c (free_attributes): Turn function into a nop for a
NULL arg.
(free_user_id): Ditto.
(free_compressed): Ditto.
(free_encrypted): Ditto.
(free_plaintext): Ditto.
(release_public_key_parts): Avoid extra check for NULL.
* g10/getkey.c (get_best_pubkey_byname): Ditto.
--
This change avoid surprises because it is common that function named
like free and taking a pointer also have similar semantics.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_best_pubkey_byname): Use the node returned by
'getkey_next' instead of doing another lookup.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/getkey.c (finish_lookup): Clarify that we do not return a
reference.
(lookup): Clarify the relation between RET_KEYBLOCK and RET_FOUND_KEY.
Check arguments. Actually release the node if it is not returned.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/getkey.c (getkey_next): Fix invocation of 'lookup'. If we want
to use RET_FOUND_KEY, RET_KEYBLOCK must be valid.
Fixes-commit: 8ea72a776a88f3c851e812d258355be80caa1bc1
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/getkey.c (pubkey_cmp): Make a copy of the user id.
(get_best_pubkey_byname): Free the user ids.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/getkey.c (get_best_pubkey_byname): If 'get_pubkey_byname' does
not return a getkey context, then it can return at most one key,
therefore there is nothing to rank. Also, always initialize '*retctx'
to be on the safe side.
GnuPG-bug-id: 2828
Fixes: ab89164be02012f1bf159c971853b8610e966301
Signed-off-by: Justus Winter <justus@g10code.com>
--
This fixes a few
if (foo)
/* A comment
with several
lines. */
{
}
Which has the problem that the block is visually not related to the
"if" and might thus falsely be considered a standalone block.
Also adds a asterisk on the left side of longer comments.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (struct pubkey_cmp_cookie): New type.
(key_is_ok, uid_is_ok, subkey_is_ok): New functions.
(pubkey_cmp): Likewise.
(get_best_pubkey_byname): Likewise.
* g10/keydb.h (get_best_pubkey_byname): New prototype.
* g10/keylist.c (locate_one): Use the new function.
* g10/pkclist.c (find_and_check_key): Likewise.
* tests/openpgp/Makefile.am (XTESTS): Add new test.
(TEST_FILES): Add new files.
* tests/openpgp/key-selection.scm: New file.
* tests/openpgp/key-selection/0.asc: Likewise.
* tests/openpgp/key-selection/1.asc: Likewise.
* tests/openpgp/key-selection/2.asc: Likewise.
* tests/openpgp/key-selection/3.asc: Likewise.
* tests/openpgp/key-selection/4.asc: Likewise.
--
When a name resembling a mail address is given to either --locate-keys
or --recipient, rank the search results and use only the most relevant
key.
This also lets us query which key will be used for encryption using
--locate-keys. However, note that --locate-keys may also return keys
incapable of encryption, though it will prefer keys that have an
encryption subkey.
GnuPG-bug-id: 2359
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/call-dirmngr.c (gpg_dirmngr_ks_get): Add arg 'quick'.
(gpg_dirmngr_wkd_get): Ditto.
* g10/keyserver.c (keyserver_get): Add arg 'quick'.
(keyserver_get_chunk): Add arg 'quick'.
(keyserver_import_fprint): Ditto. Change callers to pass 0 for it.
(keyserver_import_keyid): Ditto.
(keyserver_import_wkd): Ditto.
* g10/mainproc.c (check_sig_and_print): Call the 3 fucntions with
QUICK set.
--
Note that this option has not yet been implemented by dirmngr.
Dirmngr will simply ignore it for now.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (enum_secret_keys): At state 3 enumerate the keys in all
cases not just when --try-all-secrets is used.
--
Regression-due-to: 82b90eee100cf1c9680517059b2d35e295dd992a
Reported-by: Carola Grunwald
Signed-off-by: Werner Koch <wk@gnupg.org>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/gpg.c (oRecipientFile, oHiddenRecipientFile): New.
(opts): Add options --recipient-file and --hidden-recipient-file.
(main): Implement them. Also remove duplicate code from similar
options.
* g10/keydb.h (PK_LIST_FROM_FILE): New.
(PK_LIST_SHIFT): Bump up.
* g10/pkclist.c (expand_group): Take care of PK_LIST_FROM_FILE.
(find_and_check_key): Add and implement arg FROM_FILE.
(build_pk_list): Pass new value for new arg.
* g10/getkey.c (get_pubkey_fromfile): New.
* g10/gpgv.c (read_key_from_file): New stub.
* g10/test-stubs.c (read_key_from_file): New stub.
* g10/server.c (cmd_recipient): Add flag --file.
* g10/import.c (read_key_from_file): New.
* tests/openpgp/defs.scm (key-file1): New.
(key-file2): New.
* tests/openpgp/setup.scm: Add their private keys and import the
key-file1.
* tests/openpgp/encrypt.scm: Add new test.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (merge_selfsigs): Remove arg CTX. Add args REQ_USAGE
and WANT_EXACT.
(finish_lookup): Adjust caller. Set LOOKUP_NOT_SELECTED here...
(lookup): and not here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_KEY_CONSIDERED): New.
* g10/getkey.c: Include status.h.
(LOOKUP_NOT_SELECTED, LOOKUP_ALL_SUBKEYS_EXPIRED): New.
(finish_lookup): Add arg R_FLAGS. Count expired and revoked keys and
set flag. Check a requested usage before checking for expiraion or
revocation.
(print_status_key_considered): New.
(lookup): Print new status.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (parse_auto_key_locate): Add method "wkd".
(get_pubkey_byname): Implement that method. Also rename a variable.
* g10/call-dirmngr.c (gpg_dirmngr_wkd_get): New.
* g10/keyserver.c (keyserver_import_wkd): New.
* g10/test-stubs.c (keyserver_import_wkd): Add stub.
* g10/gpgv.c (keyserver_import_wkd): Ditto.
* g10/options.h (opt): Add field 'with_wkd_hash'.
(AKL_WKD): New.
* g10/gpg.c (oWithWKDHash): New.
(opts): Add option --with-wkd-hash.
(main): Set that option.
* g10/keylist.c (list_keyblock_print): Implement that option.
--
The Web Key Directory is an experimental feature to retrieve a key via
https. It is similar to OpenPGP DANE but also uses an encryption to
reveal less information about a key lookup.
For example the URI to lookup the key for Joe.Doe@Example.ORG is:
https://example.org/.well-known/openpgpkey/
hu/example.org/iy9q119eutrkn8s1mk4r39qejnbu3n5q
(line has been wrapped for rendering purposes). The hash is a
z-Base-32 encoded SHA-1 hash of the mail address' local-part. The
address wk@gnupg.org can be used for testing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-dirmngr.c (gpg_dirmngr_ks_list): Make R_KEYSERVER optional.
* g10/keyserver.c (keyserver_any_configured): New.
(keyserver_put): Remove arg keyserver because this will always receive
opt.keyserver which is anyway used when connecting dirmngr. Do not
check opt.keyserver.
(keyserver_import_cert): Replace opt.keyserver by
keyserver_any_configured.
* g10/mainproc.c (check_sig_and_print): Ditto.
* g10/import.c (revocation_present): Ditto.
* g10/getkey.c (get_pubkey_byname): Ditto.
* g10/gpgv.c (keyserver_any_configured): Add stub.
* g10/test-stubs.c (keyserver_any_configured): Add stub.
--
The keyserver should be configured in dirmngr.conf and thus we can't
use opt.keyserver in gpg to decide whether a keyserver has been
configured.
GnuPG-bug-id: 2147
Signed-off-by: Werner Koch <wk@gnupg.org>
--
When using tags (e.g. GNU global) to navigate the source code it is
way easier to have the documentation close to the function we are
looking at. Having the documentation in the header file would require
an extra manual lookup to understand the function.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c: Allow arg RET_KEYBLOCK to be NULL.
--
This change adds the expected behavior for the getkey_next function
to fix this NULL de-ref.
GnuPG-bug-id: 2212
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkeys): Fix double free.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Fixes-commit: 7195b943
Note: this error is not a security problem, because this code path is
currently never executed.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Werner pointed out that a special error message is not needed: the
error code (as displayed by gpg_strerror) will indicate what went
wrong.
* g10/keydb.h (struct pubkey): Rename to pubkey_s.
(pubkey_t): New. Change all struct pubkey_s to use this type.
* g10/getkey.c (get_pubkeys): Rename arg keys to r_keys.
--
It is common in GnuPG to use a suffix of _s for struct names. There
is no technical need for this (actually this pattern comes from pre
ANSI C compilers which had no separate namespaces) but it avoid
surprises when reading the code.
Adding the pubkey_t type is mainly to improve font locking by using
the common suffix _t for a typedefed type.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (parse_def_secret_key): Do not make strings passed to
log_debug translatable.
--
Debug output is intended to be used along with the source or to be
send to the developers. Thus translations are at best not helpful.
* g10/gpg.c (struct result): Move from here...
* g10/keydb.h (struct pubkey): ... to here. Update users.
* g10/gpg.c (check_user_ids): Move from here...
* g10/getkey.c (get_pubkeys): ... to here. Update users. Use
get_pubkey_byname to look up the keys (this also prunes invalid keys).
(pubkey_free): New function.
(pubkeys_free): New function.
* g10/gpg.c (main): Don't check for ambiguous key specifications.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Regression-due-to: e8c53fc
This change not only moves the checks for ambiguous key specifications
from gpg.c to getkey.c, it also disables the checks. The old code was
too divorced from the actual key lookups and, as such, it reproduced
the logic. Unfortunately, the reproduction was a poor one: despite
fixing some inconsistencies (e.g., 10cca02), it still didn't deal with
group expansion or the auto key lookup functionality. Given the
amount of instability introduced by this change, we (Neal & Werner)
decided it is better to defer introducing this functionality until
2.3.
* g10/getkey.c (parse_def_secret_key): Display the key that is
invalid, not the search description.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/getkey.c (parse_def_secret_key): Do not make debug messages
translatable. Make use of print_reported_error.
--
This patch also passes all required arguments to log_debug ;-).
Signed-off-by: Werner Koch <wk@gnupg.org>
