* scd/app.c (application_notify_card_reset): Add message for debug.
*scd/command.c (update_card_removed): Call release_application and set
SLOT -1 here.
(struct server_local_s): Remove app_ctx_marked_for_release.
(do_reset): Don't mark release but call release_application here.
(open_card): Remove app_ctx_marked_for_release handling.
(update_reader_status_file): Don't set SLOT here, so that it can be
released the APP by application_notify_card_reset in
update_card_removed.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (lock_table): Remove LAST_APP field.
(lock_reader, app_dump_state, application_notify_card_reset)
(release_application): Follow the change.
(check_conflict): New.
(check_application_conflict): Lock the slot and call check_conflict.
(select_application): Call check_conflict and not use LAST_APP.
--
We don't need LAST_APP field but just keep the application context by
APP field. Since we have a reference counter, it is possible if we
can deallocate or not.
* scd/apdu.c (apdu_close_reader): Call CLOSE_READER method even if we
got an error from apdu_disconnect.
* scd/app-common.h (no_reuse): Remove.
* scd/app.c (application_notify_card_reset): Deallocate APP here.
(select_application, release_application): Don't use NO_REUSE.
--
Reproducible scenario: Invoke gpg --card-edit session from a terminal.
Invoke another gpg --card-edit session from another. Remove a token.
Insert a token again. Type RET on both terminals. One of terminal
answers "Conflicting usage".
Perhaps, having NO_REUSE field was to avoid race conditions. Now,
APP can be safely deallocated by application_notify_card_reset.
Thanks to the2nd.
* common/util.h (GPG_ERR_OBJ_TERM_STATE): New.
* scd/iso7816.c (map_sw): Add this error code.
* scd/app-openpgp.c (do_getattr): Return the life cycle indicator.
* scd/app.c (select_application): Allow a return value of
GPG_ERR_OBJ_TERM_STATE.
* scd/scdaemon.c (set_debug): Print the DBG_READER value.
* g10/call-agent.c (start_agent): Print a status line for the
termination state.
(agent_scd_learn): Make arg "info" optional.
(agent_scd_apdu): New.
* g10/card-util.c (send_apdu): New.
(factory_reset): New.
(card_edit): Add command factory-reset.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-sc-hsm.c: New.
* scd/app.c (select_application, get_supported_applications): Register
new app.
--
Add a read/only driver for scdaemon that provides access to keys and
certificates on a SmartCard-HSM (www.smartcard-hsm.com).
The driver supports RSA and ECC keys on SmartCard-HSM cards and
USB-Sticks.
The driver does not yet support the MicroSD edition.
--
ChangeLog and FSF copyright year fix by wk.
* scd/app-common.h (APP_DECIPHER_INFO_NOPAD): New.
* scd/app-openpgp.c (do_decipher): Add arg R_INFO.
* scd/app-nks.c (do_decipher): Add arg R_INFO as a dummy.
* scd/app.c (app_decipher): Add arg R_INFO.
* scd/command.c (cmd_pkdecrypt): Print status line "PADDING".
* agent/call-scd.c (padding_info_cb): New.
(agent_card_pkdecrypt): Add arg R_PADDING.
* agent/divert-scd.c (divert_pkdecrypt): Ditto.
* agent/pkdecrypt.c (agent_pkdecrypt): Ditto.
* agent/command.c (cmd_pkdecrypt): Print status line "PADDING".
* g10/call-agent.c (padding_info_cb): New.
(agent_pkdecrypt): Add arg R_PADDING.
* g10/pubkey-enc.c (get_it): Use padding info.
--
Decryption using a card never worked in gpg 2.1 because the
information whether the pkcs#1 padding needs to be removed was not
available. Gpg < 2.1 too this info from the secret sub key but that
has gone in 2.1.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.h (struct pininfo_s): Rename from iso7816_pininfo_s.
Change meaning of MODE.
(pininfo_t): Rename from iso7816_pininfo_t.
* scd/sc-copykeys.c: Include "iso7816.h".
* scd/scdaemon.c, scd/command.c: Likewise.
* scd/ccid-driver.c: Include "scdaemon.h" and "iso7816.h".
(ccid_transceive_secure): Follow the change of PININFO_T.
* scd/app.c: Include "apdu.h" after "iso7816.h".
* scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp)
(iso7816_change_reference_data_kp): Follow the change of API.
* scd/apdu.c (struct reader_table_s): Change API of CHECK_KEYPAD,
KEYPAD_VERIFY, KEYPAD_MODIFY to have arg of PININFO_T.
(check_pcsc_keypad, check_ccid_keypad): Likewise.
(apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise.
(pcsc_keypad_verify, pcsc_keypad_modify, ct_send_apdu)
(pcsc_send_apdu_direct, pcsc_send_apdu_wrapped, pcsc_send_apdu)
(send_apdu_ccid, ccid_keypad_operation, my_rapdu_send_apdu, send_apdu)
(send_le): Follow the change of API.
* scd/apdu.h (apdu_check_keypad, apdu_keypad_verify)
(apdu_keypad_modify): Change the API.
* scd/app-dinsig.c, scd/app-nks.c, scd/app-openpgp.c: Follow the
change.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
* scd/app.c (select_application): Reorder application tests.
--
Although the DINSIG application is available on most German cards, it
is in reality not used. Thus showing the Geldkarte application is
more desirable for a good user experience.
The vreader table makes the code more clear by explicitly talking
about APDU slots and reader indices. It also accommodates for future
extensions.
* scd/scdaemon.h (server_control_s): Remove READER_SLOT.
* scd/scdaemon.c (scd_init_default_ctrl): Do not init READER_SLOT.
* scd/app.c (check_application_conflict): Add arg SLOT.
* scd/command.c (slot_status_s): Rename to vreader_s.
(server_local_s): Add field VREADER_IDX as replacement for
the READER_SLOT in server_control_s. Change all users.
(slot_table): Rename to vreader_table. Change all users.
(vreader_slot): New.
(do_reset, cmd_apdu): Map vreader to apdu slot.
(get_reader_slot): Rename to get_current_reader. Return -1 on error.
(open_card): Map vreader toapdu slot. Pass slot to
check_application_conflict.
(scd_command_handler): Init VREADER_IDX.
(update_reader_status_file): Reset SLOT field on error.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
progress_cb and progress_cb_arg.
(ccid_set_progress_cb): New.
(print_progress): New.
(ccid_transceive): Call print_progress for wait time extensions.
* apdu.c (struct reader_table_s): Add field set_progress_cb.
(new_reader_slot): Clear that field.
(open_ccid_reader): Set it to ..
(set_progress_cb_ccid_reader): ... new fucntion.
* app.c (print_progress_line): New.
(lock_reader): Add arg CTRL to set a progress callback and
change all callers to provide it.
(unlock_reader): Remove the progress callback.
* app.c (select_application): Cover up a slot mismatch error in
case it happens (it shouldn't happen).
(release_application): Use APP->slot. Lock the reader.
(application_notify_card_removed): Lock the reader.
char * vs. unsigned char * warnings. The GNU coding standards used to
say that these mismatches are okay and better than a bunch of casts.
Obviously this has changed now.
* gpg-agent.c: New option --write-env-file.
* gpg-agent.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
* estream.c: Use HAVE_CONFIG_H and not USE_CONFIG_H!
(es_func_fd_read, es_func_fd_write): Protect against EINTR.
* gpg-agent.texi (Agent UPDATESTARTUPTTY): New.
* scdaemon.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
(handle_connections): Include the file descriptor into the name of
the thread.
(show_file): Implement it.
* keyformat.txt: Define the created-at attribute for keys.
* ccid-driver.c: Replaced macro DEBUG_T1 by a new debug level.
(parse_ccid_descriptor): Mark SCR335 firmware version 5.18 good.
(ccid_transceive): Arghhh. The seqno is another bit in the
R-block than in the I block, this was wrong at one place.
* scdaemon.c: New options --debug-ccid-driver and
--debug-disable-ticker.
* app-openpgp.c (do_genkey, do_writekey): Factored code to check
for existing key out into ..
(does_key_exist): .. New function.
* gpg-connect-agent.c (add_definq, show_definq, clear_definq)
(handle_inquire): New.
(read_and_print_response): Handle INQUIRE command.
(main): Implement control commands.
(do_sign): Call it.
* iso7816.c (iso7816_manage_security_env): Allow passing DATA as
NULL to indicate an empty Lc.
* tlv.c (find_tlv): Check that a found object fits into the
buffer.
(find_tlv_unchecked): New as replacement for the old non-checking
variant.
* app.c (select_application): Keep on using the non-checking
variant.
* app-openpgp.c (get_one_do, dump_all_do): Ditto.
* acinclude.m4: Ditto.
* scdaemon.texi: Removed OpenSC specific options.
* app-p15.c: New. Basic support for pkcs15 cards without OpenSC.
There are quite a couple of things missing but at least I can use
my old TCOS cards from the Aegypten-1 development for signing.
* app.c (select_application): Detect pkcs15 applications.
* Makefile.am (scdaemon_SOURCES): Removed card.c, card-common.h
and card-p15.c because they are now obsolete. Added app-p15.c.
Removed all OpenSC stuff.
* command.c (do_reset, open_card, cmd_serialno, cmd_learn)
(cmd_readcert, cmd_readkey, cmd_pksign, cmd_pkdecrypt): Removed
all special cases for the old card.c based mechanisms.
* scdaemon.c, apdu.c: Removed all special cases for OpenSC.
%0A may pass through.
* agent.h (server_control_s): New field USE_AUTH_CALL.
* call-scd.c (agent_card_pksign): Make use of it.
* command-ssh.c (data_sign): Set the flag.
(ssh_send_key_public): New arg OVERRIDE_COMMENT.
(card_key_available): Add new arg CARDSN.
(ssh_handler_request_identities): Use the card s/n as comment.
(sexp_key_extract): Use GCRYMPI_FMT_STD.
(data_sign): Ditto.
* learncard.c (make_shadow_info): Moved to ..
* protect.c (make_shadow_info): .. here. Return NULL on malloc
failure. Made global.
* agent.h: Add prototype.
* xasprintf.c (xtryasprintf): New.
* app-openpgp.c (get_public_key): Make sure not to return negative
numbers.
(do_sign): Allow passing of indata with algorithm prefix.
(do_auth): Allow OPENPGP.3 as an alternative ID.
* app.c (app_getattr): Return just the S/N but not the timestamp.
* no-libgcrypt.c (gcry_strdup): New.
../g10/call-agent.c
(card_getattr_cb, agent_card_getattr): New.
* command-ssh.c (card_key_available): New.
(ssh_handler_request_identities): First see whether a card key is
available.
* app.c (app_getattr): Return APPTYPE or SERIALNO type even if the
application does dot support the getattr call.
* app.c (select_application): Return an error code and the
application context in an new arg.
* command.c (open_card): Adjusted for that. Don't use the
fallback if no card is present. Return an error if the card has
been removed without a reset.
(do_reset, cmd_serialno): Clear that error flag.
(TEST_CARD_REMOVAL): New. Use it with all command handlers.
(scd_update_reader_status_file): Set the error flag on all changes.
select returns with -1.
* tools.texi (gpg-connect-agent): New.
* app-openpgp.c (get_one_do): Never try to get a non cacheable
object from the cache.
(get_one_do): Add new arg to return an error code. Changed all
callers.
(do_getattr): Let it return a proper error code.
* app.c (select_application): Return an error code and the
application context in an new arg.
* command.c (open_card): Adjusted for that. Don't use the
fallback if no card is present. Return an error if the card has
been removed without a reset.
(do_reset, cmd_serialno): Clear that error flag.
(TEST_CARD_REMOVAL): New. Use it with all command handlers.
* scdaemon.c (ticker_thread): Termintate if a shutdown is pending.
* apdu.c: Added some PCSC error codes.
(pcsc_error_to_sw): New.
(reset_pcsc_reader, pcsc_get_status, pcsc_send_apdu)
(open_pcsc_reader): Do proper error code mapping.
* gpg-connect-agent.c: New.
* Makefile.am: Add it.
stable version 0.1.x.
* scdaemon.texi (Card applications): New section.
* scdaemon.c (main): New option --disable-application.
* app.c (is_app_allowed): New.
(select_application): Use it to check for disabled applications.
* ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New.
* ccid-driver.c (ccid_open_reader): Support the stable 0.1 version
of libusb.
(ccid_get_atr): Handle short messages.
* apdu.c (my_rapdu_get_status): Implemented.
