* scd/ccid-driver.c (ccid_slot_status): Handle LIBUSB_ERROR_TIMEOUT.
--
With SPR532, at the first connection, it fails by
LIBUSB_ERROR_TIMEOUT, but no retry.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct reader_table_s): Remove is_spr532.
(pcsc_vendor_specific_init): Send the ESC command for SPR532.
(pcsc_pinpad_verify, pcsc_pinpad_modify): Remove no_lc hack.
--
The "no_lc" hack lets PC/SC-lite send the ESC command for SPR532
internally, for pcsc_pinpad_verify. However, PC/SC-lite doesn't do
that for pcsc_pinpad_modify, unfortunately. Besides, I'm not sure
this hack works on Windows, which has different implementation of
PC/SC service.
It's better to send the ESC command by the driver explicitly, at the
initialization. Sending the ESC command results PCSC_E_NOT_TRANSACTED
error when a card is not active (that is the case, usually). We
ignore this error.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (intr_cb): Handle the case of multiple messages.
--
SPR532 USB Smart Card Reader (also know as SPR332) may send two
messages at once for a single interrupt transfer. An example transfer
observed was like: 50 03 50 02, which is considered valid, according
to the CCID specification.
GnuPG-bug-id: 5065
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (send_keypair_info): Emit the algo string as part
of a KEYPAIRINFO.
* scd/command.c (do_readkey): Ditto.
* scd/app-piv.c (do_readkey): Ditto.
* scd/app-nks.c (do_learn_status_core): Ditto.
(struct fid_cache_s): Add field algostr.
(flush_fid_cache): Release it.
(keygripstr_from_pk_file): Fill it and add it to the cache. Use a
single exit label.
* scd/app-help.c (app_help_get_keygrip_string_pk): Add new arg
r_algostr. Change all callers.
--
This is helpful so that callers do not need to parse the key for this
basic information. Use "scd readkey --info-only" to return the info
status line instead of the key material; using just --info returns the
info in addition to the key material.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (kdf_setup): Fix the default value.
* scd/app-openpgp.c (do_setattr): Support kdf-setup "off" by
Zeitcontrol. Make sure Gnuk and Yubikey work well.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (verify_chv2): Call verify_a_chv with chvno=1
when needed.
--
Confusingly, verify_chv2 has two different purposes; One for
verifying with CHV2 (in addition to CHV1), and the call by
CHECKPIN. For the latter, we should check CHV1.
Fixes-commit: af189be481
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_setattr): Call flush_cache_item always.
--
Only it was called when there was an object with KDF_DATA_LENGTH_MAX.
No matter the VALUELEN, it should be flushed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
The limit on 4 readers I introduced in 2003 is too low for some of our
use cases. 16 looks better. TODO: Return a useful error message in
gpg-card if the limit has been reached.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (data_objects): 0x00FA for binary data.
(do_getattr): Parse the data and send it in status lines.
(get_algorithm_attribute_string): New.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* cd/app-openpgp.c (data_objects): Add 0x00FA.
(do_getattr): Add KEY-ATTR-INFO.
--
See the section 4.4.3.11 Algorithm Information in the OpenPGP card
functional specification version 3.4.1.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (cmd_apdu): Add new option --data-atr.
* tools/gpg-card.c (cmd_apdu): Use that here. Also fix the --exlen
option and do not print the statusword in atr mode.
* tools/card-call-scd.c (scd_apdu): Detect atr mode anddon't assume a
status word.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_new_register): Do not use apdu_get_slot.
--
apdu_get_slot() may only be used after the APP has been initialized.
Thus we need to pass teh slot here directly.
Fixes-commit: 9f148360a2
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (cardtype_t): Add CARDTYPE_GNUK and
CARDTYPE_ZEITCONTROL.
* scd/app.c (strcardtype): Handle CARDTYPE_GNUK and
CARDTYPE_ZEITCONTROL.
(app_new_register): Detect Gnuk and Zeit Control implementation
by examining its ATR string.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (verify_chv2): Check availability of keys in
question.
--
With buggy Gnuk (<= 1.2.15), when no encr/auth keys are available,
it fails decrementing the signature error counter. This change
can avoid the issue.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (open_ccid_reader): Add arg r_cciderr.
(apdu_open_reader): Print a note on EPERM of the USB device.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.h (CCID_DRIVER_ERR_USB_*): New error codes.
* scd/apdu.h: New SW_HOST error codes.
* scd/apdu.c (host_sw_string): Print them
* scd/ccid-driver.c (map_libusb_error): New.
(ccid_open_usb_reader, bulk_in, abort_cmd): Map libusb error codes.
* scd/iso7816.c (map_sw): Map new codes to gpg-error.
--
This change will help to get low level error conditions from hipher
application code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_sethash): Add option --pss and allow for
--hash=null.
* agent/agent.h (struct server_control_s): Add digest.is_pss and
zero where needed.
* agent/pksign.c (agent_pksign_do): Allow for PSS with cards.
* scd/command.c (cmd_pksign): Add for --hash=none.
--
This is not a full implementaion of PSS but allows scdaemon card
drivers to detect already PSS formatted data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (close_pcsc_reader): Unlock the reader_table_lock.
(apdu_dev_list_finish): Release the context when no readers.
--
Fixes-commit: 46d185f603
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (close_pcsc_reader): Check if it's not in the loop.
--
GnuPG-bug-id: 4998
Reported-by: Kevin Locke
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/iso7816.c (CMD_UPDATE_BINARY): New.
(iso7816_update_binary): New.
* scd/app-nks.c (do_deinit): Factor some code out to...
(flush_fid_cache): new.
(do_writecert): New.
(app_select_nks): Register new handler.
--
This can be used with gpg-card to write the 3 extra certificates of a
Telesec TCOS Signature Card v2. The card with the qualified signature
is distributed with the keys for encryption and advanced signatures
but without the certificates. The certificates can be downloaded from
the website after an mail confirmation. Unpacked the downloaded
zipfile has these certificates:
auth_zert.crt
sig_zert.crt
enc_zert.crt
Using gpg-card issue these commands:
writecert NKS-NKS3.4531 <sig_zert.crt
writecert NKS-NKS3.45B1 <enc_zert.crt
writecert NKS-NKS3.4571 <auth_zert.crt
Don't mix that up, tight now there is no checking that the
certificates match the public key. I also need to write another patch
to actually implement signing and encryption with these nistp256
certificates.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_serialno): Set/clear card removed flags for all
connections using the current card.
--
This seems to solve the problems I had in gpg-card and ssh. I am not
sure why the old code was done this way - maybe an oversight when
adding support for multiple cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_getattr): New attrubute "UIF".
(do_learn_status): Use that.
--
Actually this is not just convenience but will make it easier to add
new keys to an openpgp card - we will need to change this only at one
place.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (select_all_additional_applications_internal): Re-select
first app. Add arg 'ctrl'.
--
Usually keygrip based access to the Yubikey does a switching back and
forth and thus keeps the card and scdaemon's internal state in sync.
However, if we do only a listing scdaemon did not reselect the first
application (e.g. OpenPGP) after adding other applications (e.g. PIV)
and thus led to wrong info returned in a listing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (get_dispserialno): Move more to the top.
(do_getattr): Add $DISPSERIALNO and SERIALNO. Make CHV-STATUS work
with NKS15.
(verify_pin): Use dedicated min. PIN lengths.
(parse_pwidstr): Support NKS15
--
GnuPG-bug-id: 4938
Signed-off-by: Werner Koch <wk@gnupg.org>
NIIBE Yutaka