* scd/scdaemon.c (debug_flags): Add "card".
* scd/scdaemon.h (DBG_CARD_VALUE, DBG_CARD): New.
--
Some information from parsing the card are often very helpful.
However, the card_io triggered APDU dumps are in most cases too heavy.
Thus this new debug flag.
* scd/command.c (scd_command_handler): Use gnupg_fd_t for the argument
but no INT2FD to listen. Use GNUPG_INVALID_FD.
* tpm2d/command.c (tpm2d_command_handler): Likewise.
* scd/scdaemon.c (start_connection_thread): Follow the change.
* tpm2d/tpm2daemon.c (start_connection_thread): Likewise.
* scd/scdaemon.h (scd_command_handler): Use gnupg_fd_t.
* tpm2d/tpm2daemon.h (tpm2d_command_handler): Likewise.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.h (opt): Add field opcsc_shared.
* scd/scdaemon.c (opcscShared): New.
(opts): Add "--pcsc-shared".
(main): Set flag.
* scd/apdu.c (connect_pcsc_card): Use it.
(pcsc_get_status): Take flag in account.
* scd/app-openpgp.c (cache_pin): Bypass in shared mode.
(verify_chv2: Do not auto verify chv1 in shared mode.
* scd/app-piv.c (cache_pin): By pass caceh in shared mode.
--
This option should in general not be used. The patch tries to limit
bad effects but using shared mode is somewhat dangerous depending on
the other PC/SC users.
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 21d9bd8b87a9f793a106095e3838eb71825189d7)
- Applied respective chnages also to gpg-card and keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (pincache_put): Add arg pinlen and change all callers
to provide it.
* scd/app-piv.c (cache_pin): New.
(pin_from_cache): New.
(ask_and_prepare_chv): Add args no_cache and r_unpaddedpinlen. Take
PIN from the cache. Return the unpadded length.
(verify_chv): Add arg ctrl. Cache the PIN.
(do_change_chv): Clear PIN cache.
--
The PIV pins are padded but we want to store the unpadded PIN. Thus
the changes to the function.
Code has has been tested by commenting the no_cache parameter because
we the current test certificate was created for PIV.9C which requires
a verification for each use. More testing is required.
GnuPG-bug-id: 4791
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (pincache_put): New. Uses a dummy key for now.
(pincache_get): New.
* scd/app.c (select_application): Flush the PIN cache.
(scd_update_reader_status_file): Ditto.
(maybe_switch_app): Call the new prep_reselect function.
(app_write_learn_status): Ditto.
* scd/app-openpgp.c (cache_pin): New helper to cache a PIN.
(verify_chv2): Call it.
(verify_chv3): Call it.
(clear_chv_status): Call it.
(do_change_pin): Call it.
* scd/app-common.h (struct app_ctx_s): Add function 'prep_select'.
* scd/app-openpgp.c (do_prep_reselect): New stub function.
(app_select_openpgp): Set new stub function.
* scd/app-piv.c (do_prep_reselect): New stub function.
(app_select_piv): Set new stub function.
* scd/app-common.h (struct app_ctx_s): Add parameter ctrl to setattr,
sign, auth, decipher, and check_pin. Change all implementations and
callers to pass such a parameter.
--
This is work in progress.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (struct app_ctx_s): Add func ptr 'reselect'.
* scd/app-piv.c (do_reselect): New.
(app_select_piv): Move AID constant to file scope.
* scd/app-openpgp.c (do_reselect): New.
(app_select_openpgp): Move AID constant to file scope.
* scd/app.c (apptype_from_name): New.
(check_application_conflict): Check against all apps of the card.
Always set current_apptype.
(select_additional_application): New.
(maybe_switch_app): New.
(app_write_learn_status, app_readcert, app_readkey, app_getattr)
(app_setattr, app_sign, app_auth, app_decipher, app_writecert)
(app_writekey, app_genkey, app_change_pin, app_check_pin): Use it here.
(app_do_with_keygrip): Force reselect on success.
(app_new_register): Move setting of CURRENT_APPTYPE to ...
(select_application): here so that it will be set to the requested
card.
* scd/command.c (open_card_with_request): Select additional
application if possible.
--
Noet that we will likely need to rework this even more so to get well
defined semantics for card access.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/scdaemon.h: Include app-common.h. Remove inclusion of that
header from all other files.
(card_t, app_t): Move typedef to ...
* scd/app-common.h: here. Use them in the defs.
--
In another patch we will need apptype_t in the ctrl object and thus we
need to reorganize things a bit now. Given that most files need
app-common anyway it makes sense to always include it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (struct card_ctx_s): New.
(struct app_ctx_s): Factor card specific fields out to card_ctx_s.
(app_get_slot): New.
* scd/scdaemon.h (card_t): New.
(struct server_control_s): Rename field app_ctx to card_ctx and change
all users.
* scd/app-dinsig.c: Use app_get_slot and adjust for chang in card
related fields.
* scd/app-geldkarte.c: Ditto.
* scd/app-nks.c: Ditto.
* scd/app-openpgp.c: Ditto.
* scd/app-p15.c: Ditto.
* scd/app-sc-hsm.c: Ditto.
* scd/app.c: Lost of changes to adjust for the changed data
structures. Change all callers.
(app_list_lock): Rename to card_list_lock.
(app_top): Remove.
(card_top): New.
(lock_app): Rename to lock_card and change arg type.
(unlock_app): Rename to unlock_card.
(app_dump_state): Print card and app info.
(app_reset): Rename to card_reset.
(app_new_register): Change for the new data structure.
(deallocate_card): Dealloc card and all apps.
(app_ref): Rename to card_ref.
(app_unref): Rename to card_unref.
(app_unref_locked): Rename to card_unref_locked.
(card_get_serialno): New.
* scd/command.c (cmd_pkdecrypt): Actually use the looked up card and
former app object and not the standard one from the context.
--
Although quite large, this is a straightforward change to separate
card/token related data from card application related data. Before
this change there was a one-to-one relation between card and
application and no way to represent several applications on a card.
The new data structure will allow for such a representation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_ref): New.
(app_unref): New.
(release_application): Renamed to ...
(app_unref_locked): this and remove arg locked_already. Change
callers to use this or app_ref.
* scd/command.c (open_card_with_request):
(cmd_pksign, cmd_pkauth, cmd_pkdecrypt): Use app_ref and app_unref
instead of accessing the counter directly.
--
This is better in case we need to debug stuff. There is a real change
however: We now lock and unlock the app before changing the reference
count.
The whole app locking business should be reviewed because we pass
pointers along without immediately bumping the refcount.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (struct app_ctx_s): Add with_keygrip function.
* scd/app-openpgp.c (do_with_keygrip): New.
* scd/app.c (app_do_with_keygrip): New.
* scd/command.c (cmd_keyinfo): New.
(send_keyinfo): New.
--
KEYGRIP_ACTION_LOOKUP is not yet used. It will be used for directly
asking PK* action to determine an APP.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (cmd_passwd): Add option --clear.
(send_status_printf): New.
* scd/app-common.h (APP_CHANGE_FLAG_CLEAR): New.
* scd/app-nks.c (do_change_pin): Return an error if that option is
used.
* scd/app-openpgp.c (do_change_pin): Ditto.
--
Card application may support this option to clear the PIN verification
status of a specific PIN.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/scdaemon.c (get_active_connection_count): New.
(start_connection_thread): Bump ACTIVE_CONNECTIONS up and down.
* scd/command.c (cmd_getinfo): Add subcommand "connections".
--
Apply gpg-agent change to scdaemon. See the commit in 2016-08-06:
40d16029ed8b334c371fa7f24ac762d47302826e
Then, add kicking the loop, so that main loop can notice the change of
the connection.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (select_application): Fix the logic if periodical check is
needed. If it is needed for newly found device(s), kick the loop.
(scd_update_reader_status_file): Return value if select(2) should be
called with timeout.
* scd/ccid-driver.c (ccid_require_get_status): Don't return 0 for
token with no interrupt transfer for now.
* scd/command.c (open_card_with_request): Fix scan by SERIALNO.
* scd/scdaemon.c (update_usb): Remove.
(handle_connections): Evaluate need_tick after handle_tick.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-common.h (struct app_ctx_s): Rename field to
periodical_check_needed.
* scd/scdaemon.c (update_usb): Rename from update_fdset_for_usb.
Don't use libusb_get_pollfds any more.
(scd_kick_the_loop): New.
(need_tick): Follow the rename.
(handle_connections): No libusb event handling here.
* scd/app.c (app_new_register): Follow the change of rename.
(select_application, scd_update_reader_status_file): Likewise.
* scd/ccid-driver.c (ccid_usb_thread_is_alive): New.
(intr_cb): Call scd_kick_the_loop.
(ccid_usb_thread): New. Thread to invoke INTERRUPT callback.
(ccid_open_usb_reader): Add thread invocation.
(ccid_require_get_status): Remove
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP.
(do_close_reader): Carefully handle handle->transfer.
(get_escaped_usb_string): Insert npth_unprotect/npth_protect.
(do_close_reader, bulk_out, bulk_in, abort_cmd, ccid_slot_status)
(ccid_transceive, ccid_transceive_secure): Likewise.
--
It found that libusb_get_pollfds is not supported on Windows.
Besides, it's a bit difficult to use for the select loop.
Thus, we use the thread named ccid_usb_thread, instead.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c(struct reader_table_s): Add require_get_status.
(apdu_connect): Change return value meaning. Call apdu_reset here.
* scd/app.c (app_new_register): Add require_get_status.
(select_application): Use the return value of apdu_connect.
(scd_update_reader_status_file): Call update_fdset_for_usb with
checking all_have_intr_endp.
(app_list_start, app_list_finish): Remove.
* scd/ccid-driver.c (struct ccid_driver_s): Add transfer.
(intr_cb): Don't call libusb_transfer in this callback.
(ccid_require_get_status): New.
(do_close_reader): Call libusb_transfer here.
* scd/scdaemon.c (update_fdset_for_usb): Remove the first argument.
--
With Gnuk Token, it works fine as expected. With Gemalto reader,
intr_cb is not called when card is removed. So, the macro
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP is not defined yet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (reader_table_lock, apdu_init): New.
(new_reader_slot): Serialize by reader_table_lock.
* scd/app.c (lock_app, unlock_app, app_new_register): Fix error code
usage.
(initialize_module_command): Call apdu_init.
* scd/scdaemon.c (main): Handle error for initialize_module_command.
--
This is a long standing bug. There are two different things; The
serialization of allocating a new SLOT, and the serialization of using
the SLOT. The latter was implemented in new_reader_slot by lock_slot.
However, the former was not done. Thus, there was a possible race where
a same SLOT is allocated to multiple threads.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (lock_app): Rename from lock_reader and use internal field
of APP.
(unlock_app): Likewise.
(app_dump_state): Use APP.
(application_notify_card_reset): Remove.
(check_conflict): Change API for APP, instead of SLOT.
(check_application_conflict): Likewise.
(release_application_internal): New.
(app_reset): New.
(app_new_register): New.
(select_application): Change API for APP, instead of SLOT.
(deallocate_app, release_application): Modify for manage link.
(report_change): New.
(scd_update_reader_status_file): Moved from command.c and
use APP list, instead of VREADER.
(initialize_module_command): Moved from command.c.
* scd/command.c (TEST_CARD_REMOVAL): Remove.
(IS_LOCKED): Simplify.
(vreader_table): Remove.
(vreader_slot, update_card_removed): Remove.
(do_reset): Call app_reset.
(get_current_reader): Remove.
(open_card): Add SCAN arg.
(cmd_serialno): No retry, since retry is done in lower layer in apdu.c.
No do_reset, since it is done in lower layer.
Add clearing card_removed flag.
(cmd_disconnect): Call apdu_disconnect.
(send_client_notifications): Modify for APP.
(update_reader_status_file): Remove.
--
APP is the abstraction of the card application. For management of
cards, it is better to focus on the APP instead of the physical reader.
This change makes support of multiple card/token easier.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
The vreader table makes the code more clear by explicitly talking
about APDU slots and reader indices. It also accommodates for future
extensions.
* scd/scdaemon.h (server_control_s): Remove READER_SLOT.
* scd/scdaemon.c (scd_init_default_ctrl): Do not init READER_SLOT.
* scd/app.c (check_application_conflict): Add arg SLOT.
* scd/command.c (slot_status_s): Rename to vreader_s.
(server_local_s): Add field VREADER_IDX as replacement for
the READER_SLOT in server_control_s. Change all users.
(slot_table): Rename to vreader_table. Change all users.
(vreader_slot): New.
(do_reset, cmd_apdu): Map vreader to apdu slot.
(get_reader_slot): Rename to get_current_reader. Return -1 on error.
(open_card): Map vreader toapdu slot. Pass slot to
check_application_conflict.
(scd_command_handler): Init VREADER_IDX.
(update_reader_status_file): Reset SLOT field on error.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
