* common/sysutils.c (gnupg_fopen) [W32]: Use _wfopen if needed. Use
new function in most places where fopen is used.
--
The config files in 2.2 are still read using fopen - we need to change
this to allow Unicode directory names. There is also one case where
files are written using the old fopen. The new option parser in 2.3
does not have this problem but at some places fopen is also still used.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_getcwd) [W32]: Use Unicode version.
--
gpgrt 1.40 has not yet been released, so to make getcwd work properly
on Windows we need to have the code here as well.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.c (ccid_require_get_status): For VENDOR_SCM reader,
return 0 only at the initial call.
(bulk_in): Don't detect an error for VENDOR_SCM reader, just kicking
the loop, to invoke scd_update_reader_status_file, which calls
ccid_slot_status again.
(ccid_slot_status): Move the call of ccid_vendor_specific_setup to...
(ccid_get_atr): ... here.
--
For readers with interrupt transfer support, it is only intr_cb which
sets handle->powered_off to 1. Keeping this condition makes no race.
The function ccid_slot_status can also detect a communication error,
which causes apdu_close_reader (but not setting ->powered_off).
GnuPG-bug-id: 5121
Fixes-commit: 920f258eb6018ecec1d63bad6a0fb0772f72affa
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 484bafda4dbf5ffe9e7c41ef24fbc5bd791a3b32)
* scd/command.c (reset_notify): Add option --keep-lock.
(do_reset): Add arg keep_lock.
(cmd_lock): Send progress status.
* g10/call-agent.c (agent_scd_apdu): Add more pseudo APDUs.
* g10/card-util.c (send_apdu): Ditto.
(factory_reset): Use lock commands.
--
This is required so that for example Kleopatra does not detect the
RESET and issues a SERIALNO of its own, thus conflicting with our
SERIALNO undefined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (NEED_KSBA_VERSION): Set to 1.3.5.
--
Minor update to make sure that important fixes are used. That version
was release in 2016 and thus before the new requirement for Libgcrypt
1.8.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (NEED_GPG_ERROR_VERSION): Require 1.27
* common/util.h: Remove compatibility macros.
--
This is just a minor change to align with the need for Libgcrypt 1.8.
The latter was first released in summer 2017 while Libgpg-error 1.27
was released earlier in spring that year.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (NEED_LIBGCRYPT_VERSION): Require 1.8.
* tools/gpgconf.c (show_version_libgcrypt): Remove conditional case
for Libgcrypt < 1.8.
* common/compliance.c (gnupg_rng_is_compliant): Ditto.
* agent/pksign.c: Ditto.
* agent/gpg-agent.c (thread_init_once): Ditto.
(agent_libgcrypt_progress_cb): Ditto.
* agent/command.c (cmd_getinfo): Ditto.
--
Libgcrypt 1.7 reached end-of-life more than a year ago. Thus there is
no reason to keep backward support for it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_CANCELED_BY_USER): New.
* g10/passphrase.c (passphrase_to_dek): Send STATUS_CANCELED_BY_USER
instead of STATUS_MISSING_PASSPHRASE when canceled is set.
--
This is to prevent further pinentry tries when the pinentry is canceled
by the user during symmetric decryption.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
(cherry picked from commit 31e47dfad0f40e31e8b3113b933696e8e4105136)
* g10/misc.c (print_digest_rejected_note): Do not print in quiet mode.
(print_sha1_keysig_rejected_note): Ditto.
--
GnuPG-bug-id: 4893
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit e08e1d62d089a154ec5d7c80cd58e8e3b18d2d6b)
* doc/examples/vsnfd.prf: Rename to VS-NfD.prf.
* doc/examples/Automatic.prf: New.
* doc/Makefile.am (examples): Adjust.
* build-aux/speedo/w32/inst.nsi: Install gpg-check-pattern.exe and 3
example files.
* build-aux/speedo/w32/wixlib.wxs: Add new files.
--
Note that we renamed the existing example profile so that kleopatra
shows a nicer name. In fact the gpg4win installer just copies of
theses file but it is better to maintain them here.
gpg-check-pattern.exe can no be installed because we meanwhile have a
regex lib which works also on Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/create.c: Include sysutuls.h
* g13/sh-dmcrypt.c: Ditto.
--
This is needed due to the recent switch from stat to gnupg_stat.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (main) <aApplyDefaults, aApplyProfile>: Create the
standard home directory.
--
This fixes a regression due to the fix for
GnuPG-bug-id: 4867
Before that change gpgsm implictly created the homedir while options
were collected. It is important to have this so that a login script
can create config files for new users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/openfile.c (try_make_homedir): Move core of the code to ...
* common/homedir.c (gnupg_maybe_make_homedir): new.
* sm/keydb.c (try_make_homedir): Implement using new function.
* common/homedir.c: Include i18n.h.
* po/POTFILES.in: Add common/homedir.c.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (get_default_pinentry_name): Try ../bin/pinentry.exe
--
In an installation layout where GnuPG is installed as a component
of another software it might be useful to have pinentry placed
in a different bin directory without the forced folder name of
Gpg4win.
* tools/Makefile.am (gpgconf-w32): New target. Builds gpgconf with
subsystem windows.
* build-aux/speedo/w32/wixlib.wxs: Package it.
--
This allows us to create scripts that call gpgconf without opening
a console. Using subsystem windows is better then to just close
the console after start as it avoids the console flashing up.
* common/gettime.c: Include locale.h.
(asctimestamp): Increase buffer. On Windows use setlocale.
--
GnuPG-bug-id: 5073
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (set_compliance_option): For AES256 and SHA256 in de-vs
mode.
* g10/encrypt.c (setup_symkey): Add extra compliance check.
(encrypt_simple): Avoid printing a second error oncplinace failure.
--
Because we used the RFC4880 mode as base for the de-vs mode we got
3DES as symmetric encryption algorithm. With the default gnupg mode
that was already used. The new extra compliance checks are added to
detect whether a --personal-cipher-preference or --cipher-algo option
tried to override the algorithms. They are still possible but now
non-compliant algorithms will throw an error.
Manual testing can be done with commands like this:
gpg --no-options --compliance=de-vs \
--personal-cipher-preferences "S1 S7" \
--pinentry-mode loopback -v --passphrase abc -ac </etc/motd
Here the command fails due to IDEA (S1) being the preferred cipher
algorithm. Using "--s2k-digest-algo SHA1" instead of
--personal-cipher-preferences will also fail.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit d1f2a6d9f71cf50318f4891c84aeedb975553896)
* g10/misc.c (pct_expando): Catch special case of the empty string.
Also map a NULL to the empty string.
* g10/photoid.c (show_photos): Make an empty string used as command
fail.
--
This patch also fixes a segv when calling gpg wrongly like
gpg -N \-foo@example.org
GnuPG-bug-id: 5117
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (is_weak_digest): New.
(print_digest_algo_note): Use it here.
* g10/sig-check.c (check_signature_end_simple): Use it.
* g10/sign.c (hash_for): Do not use recipient_digest_algo if it is in
the least of weak digest algorithm.
--
If a message is signed and encrypted to several recipients, the to be
used digest algorithm is deduced from the preferences of the
recipient. This is so that all recipients are able to check the the
signature. However, if the sender has a declared an algorithm as
week, that algorithm shall not be used - in this case we fallback to
the standard way of selecting an algorithm.
Note that a smarter way of selecting the algo is to check this while
figuring out the algorithm - this needs more testing and thus we do it
the simple way.
Reported-by: Phil Pennock
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 15746d60d492f5792e4a179ab0a08801b4049695
* agent/cvt-openpgp.c (convert_secret_key): Avoid adding 0x00 at the
beginning of MPI.
--
In master, we handle it as opaque MPI, but in 2.2, we use standard MPI
here.
GnuPG-bug-id: 5114
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (ccid_vendor_specific_setup): New. Limit
only for SPR532, excluding other readers by SCM.
(ccid_slot_status): Use ccid_vendor_specific_setup.
--
We follow the setup procedure of libccid implementation, which sends
the escape command for SPR532 only.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/sysutils.h (struct gnupg_dirent_s): New.
* common/sysutils.c: Include dirent.h.
(struct gnupg_dir_s): New.
(gnupg_opendir, gnupg_readdir, gnupg_closedir): New. Change all
callers of opendir, readdir, and closedir to use these functions.
--
GnuPG-bug-id: 5098
Backported-from-master: 7e22e08e2ab09cd3c2317f5e80e8ee47d46eff4b
* common/sysutils.c (gnupg_stat): New.
* common/sysutils.h: Include sys/stat.h.
--
Yet another wrapper for Unicode support on Windows.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 18e5dd7b03ced51611c9ba1345cf498a0aaf14a6)
* common/sysutils.c (any8bitchar) [W32]: New.
(gnupg_open): New. Replace most calls to open by this.
* common/iobuf.c (any8bitchar) [W32]: New.
(direct_open) [W32]: Use CreateFileW if needed.
--
This is yet another step for full Unicode support on Windows.
GnuPG-bug-id: 5098
(cherry picked from commit 4dcef0e17836e8725c31a3b76f2bf7144345c808)
* common/dotlock.c (any8bitchar) [W32]: New.
(dotlock_create_w32): Use strconcat and CreateFileW.
* common/t-dotlock.c: Source include dotlock.c and modify to allow
manual testing on Windows.
--
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit b47c355b18d9537ccc3dd3e80cc1825b018ecff7)
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 390497ea115e1aca93feec297a5bd6ae7b1ba6dd
* common/sysutils.c (gnupg_access): New. Replace all calls to access
by this wrapper.
* common/homedir.c (w32_shgetfolderpath): Change to return UTF-8
directory name.
(standard_homedir): Adjust for change.
(w32_commondir, gnupg_cachedir): Ditto.
--
Also use SHGetFolderPathW instead of SHGetFolderPathA on Windows.
This is required to correctly handle non-ascii filenames on Windows.
GnuPG-bug-id: 5098
(cherry picked from commit c94ee1386e0d5cdac51086c4d5b92de59c09c9b5)
* scd/ccid-driver.c (ccid_slot_status): Handle LIBUSB_ERROR_TIMEOUT.
--
Backport master commit of:
b1e8072320c19246962beb6d67dc5784b5a72364
With SPR532, at the first connection, it fails by
LIBUSB_ERROR_TIMEOUT, but no retry.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (intr_cb): Handle the case of multiple messages.
--
Backport master commit of:
7cbb513a2dc150a90a30c53316970df2a439d494
SPR532 USB Smart Card Reader (also know as SPR332) may send two
messages at once for a single interrupt transfer. An example transfer
observed was like: 50 03 50 02, which is considered valid, according
to the CCID specification.
GnuPG-bug-id: 5065
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
