* sm/call-dirmngr.c (gpgsm_dirmngr_lookup): Add optional arg URL and
adjust all callers.
* sm/certchain.c (oidstr_caIssuers): New.
(struct find_up_store_certs_s): Add additional fields.
(find_up_store_certs_cb): Store the fingerprint.
(find_up_via_auth_info_access): New.
(find_up): Try the AIA URI first.
--
Note that --auto-issuer-key-retrieve is required to use that.
GnuPG-bug-id: 4898
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (decrypt_data): Move aead algo detection up.
--
Note that the AEAD modes are not yet approved for --compliance=de-vs
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/main.h (DEFAULT_AEAD_ALGO): Set to OCB.
--
With the old code and using libgcrypt 1.9 would have switched from the
high performance OCB to the ugly EAX mode. We are free software, we
are OCB.
* dirmngr/validate.c (hash_algo_from_buffer): New.
(uint_from_buffer): New.
(check_cert_sig): Support rsaPSS.
* sm/certcheck.c (gpgsm_check_cert_sig): Fix small memory leak on
error.
--
Yes, I know that there is a lot of code duplication. In fact some of
the code is ugly and it would be better if we enhance Libgcrypt to
guarantee that returned memory buffers via gcry_sexp_extract_param are
allways Nul terminated and we should also enhance that function to
directly extract into an unsigned int or char *.
GnuPG-bug-id: 4538
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sexputil.c (hash_algo_to_string): New.
--
Libgcrypt expects lowercase names and it is cumbersome to downcase
those retrieved via gcry_md_algo_name. It is easier and also faster
to use a dedicated map function.
* scd/app-p15.c (make_pin_prompt): Factor some code out to ...
(get_dispserialno): this.
(do_getattr): Use new fucntion for a $DISPSERIALNO.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pubkey-enc.c (get_it): Remove check which mandates shorter
padding.
--
According to the section 8 of RFC 6637, the sender MAY use 21 bytes of
padding for AES-128 to provide 40-byte "m".
Reported-by: Metin Savignano
GnuPG-bug-id: 4908
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-p15.c (struct prkdf_object_s): New fields common_name and
serial_number.
(release_prkdflist): Free them.
(keygrip_from_prkdf): Parse cert and set them.
(any_control_or_space): New.
(make_pin_prompt): New.
(verify_pin): Construct a pretty PIN prompt.
(do_sign): Remove debug output.
--
The D-Trust card has the SerialNumber part of the Subject printed on
the front matter, we assume this is also possible with other cards and
thus we show this as serial number.
The holder of the card is also extracted from the card's subject.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (map_sw): Detect 0x63Cn status code.
--
I really wonder when that got lost and we ended up with a simple card
error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_select_mf): New.
* scd/app-p15.c (card_product_t): New.
(struct app_local_s): Add field 'card_product'.
(read_ef_tokeninfo): Detect D-Trust card.
(prepare_verify_pin): Switch to D-Trust AID.
(do_decipher): Restore a SE for D-TRust cards. Chnage the passing
indicator to 0x81.
--
Using what I learned from a USB trace running the Governikus Signer
Software on Windows this fixes the left over problem with the new
D-Trust card support.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.h (struct card_info_s): Add manufacturer fields.
* tools/card-call-scd.c (release_card_info): Release them.
(learn_status_cb): Parse MANUFACTURER attribute.
* tools/gpg-card.c (get_manufacturer): Remove.
(list_card): Use the new attribute.
* g10/call-agent.h (struct agent_card_info_s): Add manufacturer fields.
* g10/call-agent.c (agent_release_card_info): Release them.
(learn_status_cb): Parse MANUFACTURER attribute.
* g10/card-util.c (get_manufacturer): Remove.
(current_card_status): Use new attribute.
--
This does away with the duplicated OpenPGP vendor tables; they are now
at a better place (app-openpgp.c).
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (get_manufacturer): New..
(do_getattr): Add new attribute "MANUFACTURER".
(do_learn_status): Always print it.
--
This will make it easy to maintain the list of OpenPGP vendors at just
one place.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (prepare_verify_pin): Allow use without an AODF.
(verify_pin): Ditto.
(do_with_keygrip): Implement capability restrictions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_keyinfo): Use Gcrypt constants for CAP.
* scd/app-openpgp.c (do_with_keygrip): Adjust for them.
* scd/app-piv.c (do_with_keygrip): Ditto.
--
That makes it easier to read. An open question is whether we should
allow several capabilities and whether they are the ORed or ANDed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (struct prkdf_object_s): Add flag pin_verified.
(verify_pin): Make use of it.
--
Theee is still a problem with the APDUs we send: Switching between
signing and decryption does work but not in the other way.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_sign): Move keygrip_from_prkdf before PIN
verification.
(do_decipher): Add keygrip_from_prkdf.
--
This is required because that function may change the current file
which is set by prepare_verify_pin right before MSE. HAs alredy been
done on the backport to 2.2
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_decipher): New.
--
tested using the D-TRUSt card and a SCR3310 reader. The Kobil KAAN
Advanced, I used for the signing tests could not be used because it
supports only Short APDU Level exchange.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certdump.c (format_name_writer): Take care of a flush request.
--
We won't see a flush here so that fix does not solve a real bug but we
want to be correct. Note that this function seems to predate the
es_fopenmem function and thus in master (2.3) we should replace it
entirely.
GnuPG-bug-id: 4495
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from 2.2 commit 8d0d61aca3d2713df8a33444af3658b859d72be8)
* scd/app-help.c (app_help_get_keygrip_string_pk): Add optional arg
r_pkey and change all callers.
(app_help_get_keygrip_string): Ditto.
* scd/app-p15.c (struct cdf_object_s): Use bit flags
(struct aodf_object_s): Ditto. Add field 'fid'.
(struct prkdf_object_s): Ditto. Add fields keygrip, keyalgo, and
keynbits.
(parse_certid): Allow a keygrip instead of a certid aka keyref.
(read_ef_aodf): Store the FID.
(keygripstr_from_prkdf): Rename to ...
(keygrip_from_prkdf): this. Remove arg r_gripstr and implement cache.
Change callers to directly use the values from the object. Also store
the algo and length of the key ion the object.
(keyref_from_keyinfo): New. Factored out code.
(do_sign): Support SHA-256 and >2048 bit RSA keys.
(do_with_keygrip): New.
(app_select_p15): Register new function.
--
This has been tested with a D-Trust card featuring 3072 bit keys.
Note that non-repudiation key for a qualified signature does not yet
work because we do not yet support rsaPSS padding. Thus a gpgsm
--learn shows a couple of Bad Signature errors for this key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_read_binary): Factor code out to ...
(iso7816_read_binary_ext): new function. Add arg extended_mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
This removes almost all log_debug calls and uses opt.verbose and
log_info to show card information. Also avoid too long and thus
harder to read lines.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (read_ef_odf): Detect the home_DF on the fly. Silence
the garbage warning for null bytes.
(print_tokeninfo_tokenflags): New.
(read_ef_tokeninfo): Print manufacturer, label, and flags.
(app_select_p15): No need to use the app_get_slot macro.
(CARD_TYPE_CARDOS_50): New const.
(card_atr_list): Detect CardOS 5.0
--
The card under test is a "Test-Signaturkarte D-TRUST Card 3.1" for a
mere 49 Euro and no specs available. D-Trust is a branch of the
German Bundesdruckerei. Compare that to Telesec and Yubikey who have
always been nice enough to send bunches of sample cards without a need
to wade through lots of forms and not even asking for money. Guess
which cards I prefer.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/protect-tool.c (read_key): Detect simple extended key format.
--
This is a quick hack to get a useful error messages. The real fix is
to replace the protect tool by a more useful new tool.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certchain.c (is_cert_still_valid): Shortcut if tehre is no DP.
* common/audit.c (proc_type_verify): Print "n/a" if a cert has no
distribution point.
* sm/gpgsm.h (opt): Add field enable_issuer_based_crl_check.
* sm/gpgsm.c (oEnableIssuerBasedCRLCheck): New.
(opts): Add option --enable-issuer-based-crl-check.
(main): Set option.
--
If the issuer does not provide a DP and the user wants such an issuer,
we expect that a certificate does not need revocation checks. The new
option --enable-issuer-based-crl-check can be used to revert to the
old behaviour which requires that a suitable LDAP server has been
configured to lookup a CRL by issuer.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (check_keyidstr): Add optional arg r_use_auth to
test also for OpenPGP.3.
(do_sign): Enable that new mode.
--
This is very useful to allow gpgsm to use a certificate based on the
OpenPGP card's authentication key. That key is usually used for ssh
but it makes sense to use it also for user certificate based
authentication.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certreqgen.c (proc_parameters): Remove checking GCRY_PK_RSA.
--
This is an initial change to support ECC key generation.
GnuPG-bug-id: 4888
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgconf-comp.c (gpg_agent_runtime_change): Remove unused var.
(scdaemon_runtime_change): Ditto.
(dirmngr_runtime_change): Ditto.
(gc_component_check_options): Pass --homedir if needed.
(retrieve_options_from_program): Take care of --homedir.
--
This is related to bug 4882 but different due all the code changes.
GnuPG-bug-id: 4882
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (tdb_register_trusted_key): accept fingerprint as well
as long key ID.
* doc/gpg.texi: document that --trusted-key can accept a fingerprint.
--
GnuPG-bug-id: 4855
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Fixed uses or return and kept the old string to avoid breaking
translations.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (merge_selfsigs_main): Take a zero key creation time in
account.
--
Keys created at the Epoch have a creation time of 0; when figuring out
the latest signature with properties to apply to a key the usual
comparison A > B does not work if A is always 0. We now special case
this for the expiration and usage data.
Co-authored-by: gniibe@fsij.org
GnuPG-bug-id: 4670
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
