* app-openpgp.c: Made all strings translatable.
(verify_chv3) [GNUPG_MAJOR_VERSION]: Make opt.allow_admin
available for use in gnupg 2.
(verify_chv3): Reimplemented countdown showing to use only
functions from this module. Flush the CVH status cache on a
successful read.
(get_one_do): Hack to bypass the cache for cards versions > 1.0.
(store_fpr): Store the creation date for card version > 1.0.
there by the scdaemon which is a bit different to the direct
integration in gpg 1.3. In general they should all be maintained in
1.9 but while preparing 1.4 its okay to do it in 1.3. We just need to
take some care not to break 1.9 to heavily.
app-openpgp.c: Made all strings translatable.
(verify_chv3) [GNUPG_MAJOR_VERSION]: Make opt.allow_admin
available for use in gnupg 2.
(verify_chv3): Reimplemented countdown showing to use only
functions from this module.
issued, skip right to the CHV1/CHV2 PIN change. No need to show the
unblock or admin PIN change option. (card_edit): Add "admin" command to
add admin commands to the menu. Do not allow admin commands until "admin"
is given.
* app-openpgp.c (verify_chv3): Show a countdown of how many wrong admin
PINs can be entered before the card is locked.
* options.h, g10.c (main), app-openpgp.c (verify_chv3): Remove
--allow-admin.
error. However the backupfile has been created successfully.
* rsa.c (rsa_generate): Return the dummy list of factors only if
the caller asked for it.
* card_util.c (generate_card_keys): ask whether backup should be
created.
(card_store_subkey): Factored some code out to ..
* keygen.c (save_unprotected_key_to_card): .. new function.
(gen_card_key_with_backup): New.
(generate_raw_key): New.
(generate_keypair): New arg BACKUP_ENCRYPTION_DIR. Changed all
callers.
(do_generate_keypair): Divert to gen_card_key_with_backup when
desired.
* configure.ac: Check for readline. Make enable-card-support the
default. New option --without-readline. Allow the use of either
the development or the stable libusb.
* cardglue.h: Add members for CA fingerprints.
* cardglue.c (agent_release_card_info): Invalid them.
(learn_status_cb): Store them.
* app-common.h, app-openpgp.c, iso7816.c, iso7816.h
* apdu.c, apdu.h, ccid-driver.c, ccid-driver.h
* card-util.c: Updated from current gnupg-1.9.
* ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New.
* ccid-driver.c (ccid_open_reader): Support the stable 0.1 version
of libusb.
(ccid_get_atr): Handle short messages.
* apdu.c (my_rapdu_get_status): Implemented.
* apdu.c: Include <signal.h>.
* apdu.c (reader_table_s): Add function pointers for the backends.
(apdu_close_reader, apdu_get_status, apdu_activate)
(send_apdu): Make use of them.
(new_reader_slot): Intialize them to NULL.
(dump_ccid_reader_status, ct_dump_reader_status): New.
(dump_pcsc_reader_status): New.
(open_ct_reader, open_pcsc_reader, open_ccid_reader)
(open_osc_reader, open_rapdu_reader): Intialize function pointers.
(ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu)
(error_string): Removed. Replaced by apdu_strerror.
(get_ccid_error_string): Removed.
(ct_activate_card): Remove the unused loop.
(reset_ct_reader): Implemented.
(ct_send_apdu): Activate the card if not yet done.
(pcsc_send_apdu): Ditto.
* ccid-driver.h: Add error codes.
* ccid-driver.c: Implement more or less proper error codes all
over the place.
* apdu.c (apdu_send_direct): New.
(get_ccid_error_string): Add some error code mappings.
(send_apdu): Pass error codes along for drivers already supporting
them.
(host_sw_string): New.
(get_ccid_error_string): Use above.
(send_apdu_ccid): Reset the reader if it has not yet been done.
(open_ccid_reader): Don't care if the ATR can't be read.
(apdu_activate_card): New.
(apdu_strerror): New.
(dump_reader_status): Only enable it with opt.VERBOSE.
* iso7816.c (map_sw): Add mappings for the new error codes.
* apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader)
(reset_ccid_reader, open_osc_reader): Call dump_reader_status only
in verbose mode.
* app-openpgp.c (do_getattr): Fix for sending CA-FPR.
* app-openpgp.c (app_openpgp_readkey): Fixed check for valid
exponent.
* app-openpgp.c (do_setattr): Sync FORCE_CHV1.
* card-util.c (change_login): Kludge to allow reading data from a
file.
(card_edit): Pass ARG_STRING to change_login.
(card_status): Print CA fingerprints.
(change_cafpr): New.
(card_edit): New command CAFPR.
* errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes.
* errors.c (g10_errstr): New error codes G10ERR_NO_CARD,
G10ERR_CANCELED.
Changed all callers.
* cardglue.c (pin_cb): Use it here, so the machine interface can
tell whether the Admin PIN is requested.
* cardglue.c (agent_scd_checkpin): New.
* misc.c (openpgp_pk_algo_usage): Added AUTH usage.
* app-openpgp.c (check_against_given_fingerprint): New. Factored
out that code elsewhere.
(do_check_pin): New.
* card-util.c (card_edit): New command "passwd". Add logic to
check the PIN in advance.
(card_status): Add new args to return the serial number. Changed
all callers.
requested.
(genkey_status_cb): New.
(agent_scd_genkey): Implemented.
* keygen.c (generate_keypair): New arg CARD_SERIALNO and prepare
parameters for on card key generation. Changed all callers.
(do_generate_keypair): Add new arg card and merged casrd specific
changes from 1.9.
(proc_parameter_file): New arg card, apss it down to
do_generate_keypair and changed all callers.
(gen_card_key): New.
* g10.c: Include cardclue.h.
(main): s/app_set_default_reader_port/card_set_reader_port/.
* cardglue.c (card_set_reader_port): New to address include file
issues.
so that it can be used by getattr to update the structure.
(agent_scd_getattr): New.
* keylist.c (print_pubkey_info): Add FP arg for optional printing
to a stream. Changed all callers.
--change-pin. New options --ctapi-driver, --pcsc-driver and
--disable-ccid
* options.h (DBG_CARD_IO): New.
* cardglue.c, cardclue.h: Enhanced.
* card-util.c: New. Taken from current the gnupg 1.9 branch.
* app-common.h, app-openpgp.c, iso7816.c, iso7816.h, apdu.c
* apdu.h, ccid-driver.c, ccid-driver.h: New. Takem from the current
gnupg 1.9 branch withy minor changes to include directives.
* Makefile.am: Added these files.
