hardcoding key sizes. Bump default to 2048. Bump minimum down to 512,
where possible, but require --expert to get there. DSA is always 1024
unless --expert is given.
opt.s2k_digest_algo. This helps fix a problem with PGP 2.x encrypted
symmetric messages. Change all callers (encode.c, g10.c, keyedit.c,
keygen.c, passphrase.c, sign.c).
* armor.c, cardglue.c, getkey.c, import.c, keygen.c: Be consistent in some
more quoted strings. Always use 'user ID', not 'user id', "quotes" for
user IDs, etc.
error. However the backupfile has been created successfully.
* rsa.c (rsa_generate): Return the dummy list of factors only if
the caller asked for it.
* card_util.c (generate_card_keys): ask whether backup should be
created.
(card_store_subkey): Factored some code out to ..
* keygen.c (save_unprotected_key_to_card): .. new function.
(gen_card_key_with_backup): New.
(generate_raw_key): New.
(generate_keypair): New arg BACKUP_ENCRYPTION_DIR. Changed all
callers.
(do_generate_keypair): Divert to gen_card_key_with_backup when
desired.
* g10.c: Make -K an alias for --list-secret-keys.
* keylist.c (print_card_serialno): New. Taken from gnupg 1.9.11.
(list_keyblock_print): Make use of it.
* keyedit.c (show_key_with_all_names): Print the card S/N.
* keyedit.c (keyedit_menu): New command ADDCARDKEY.
* card-util.c (card_generate_subkey): New.
* keygen.c (generate_card_subkeypair): New.
(gen_card_key): New arg IS_PRIMARY; changed all callers.
* cardglue.c (open_card): Use shutdown code if possible.
(check_card_serialno): Ditto.
continuing confusion and make room for possible changes in devel.
* parse-packet.c (parse_plaintext): Show the hex value for the literal
packet mode since it may not be printable.
* keygen.c (make_backsig): Make sure that the backsig was built
successfully before we try and use it.
* status.h, status.c (get_status_string), plaintext.c (handle_plaintext):
New status tags PLAINTEXT and PLAINTEXT_LENGTH.
(list_one): Use const char* for i18n string helpers.
* keygen.c (do_generate_keypair, read_parameter_file): Really
close the files.
(do_generate_keypair): Create the secret key file using safe
permissions. Noted by Atom Smasher.
backsigs.
* getkey.c (merge_selfsigs_subkey): Find 0x19 backsigs on subkey selfsigs
and verify they are valid. If DO_BACKSIGS is not defined, fake this as
always valid.
* packet.h, parse-packet.c (parse_signature): Make parse_signature
non-static so we can parse 0x19s in self-sigs.
* main.h, sig-check.c (check_backsig): Check a 0x19 signature.
(signature_check2): Give a backsig warning if there is no or a bad 0x19
with signatures from a subkey.
generate_subkeypair): New is_subkey argument to set whether a generated
key is a subkey. Do not overload the ret_sk. This is some early cleanup
to do backsigs for signing subkeys.
* keygen.c (write_keybinding, do_generate_keypair, generate_subkeypair):
Keep track of the unprotected subkey secret key so we can make a backsig
with it.
* keygen.c (make_backsig): New function to add a backsig to a binding sig
of signing subkeys. Currently disabled. (write_keybinding): Call it here,
for signing subkeys only.
* sign.c (make_keysig_packet): Allow generating 0x19 signatures (same as
0x18 or 0x28, but used for backsigs).
* packet.h, build-packet.c (build_sig_subpkt): Add new SIGSUBPKT_SIGNATURE
type for embedded signatures.
present if --expert is set.
* plaintext.c (handle_plaintext): Make bytecount static so it works with
multiple literal packets inside a message.
* encode.c, helptext.c (keygen.algo, keygen.algo.elg_se), keygen.c
(ask_algo), sig-check.c (do_check_messages), skclist.c (build_sk_list):
Rename "ElGamal" to "Elgamal" as that is the proper spelling nowadays.
Suggested by Jon Callas.
runtime as it properly handles algorithms disabled at build or run time.
* getkey.c (merge_selfsigs_main): Properly handle expired user IDs when
the expired self-sig is not the only self-sig.
* misc.c (compress_algo_to_string): Return NULL on failure like all of the
other xxxx_algo_to_string() functions.
* mainproc.c (list_node): Minor spacing tweak to match --list-keys output.
* keylist.c (list_keyblock_print), mainproc.c (list_node): Mark revoked
subkeys as revoked. Requested by Matthew Wilcox. Revoked overrides
expiration when both apply.
* keyedit.c (show_prefs): Use compress algo constants.
(show_basic_key_info): Make revoked and expired tags translatable.
* g10.c (rm_group): Properly ungroup from a list of groups.
list of ultimately trusted keys.
* keygen.c (do_generate_keypair): Use it here so that the ultimate
ownertrust happens before the trustdb (might be) rebuilt. Also fix an
error where the newly generated pk is thought to be a subkey by the
trustdb.
* g10.c (main): Fix --export-all do actually do something different than
--export.
* pkclist.c (build_pk_list): Show all recipients rather than showing each
recipient as they are added.
* mainproc.c (proc_symkey_enc, proc_encrypted): Keep a count of the number
of passphrases that can decrypt a symmetric or mixed symmetric/pk message
and include it in the list of keys shown to the user.
requested.
(genkey_status_cb): New.
(agent_scd_genkey): Implemented.
* keygen.c (generate_keypair): New arg CARD_SERIALNO and prepare
parameters for on card key generation. Changed all callers.
(do_generate_keypair): Add new arg card and merged casrd specific
changes from 1.9.
(proc_parameter_file): New arg card, apss it down to
do_generate_keypair and changed all callers.
(gen_card_key): New.
* g10.c: Include cardclue.h.
(main): s/app_set_default_reader_port/card_set_reader_port/.
* cardglue.c (card_set_reader_port): New to address include file
issues.
adding a keyserver URL.
* keyedit.c (keyedit_menu, menu_set_keyserver_url): New command to set
preferred keyserver to specified (or all) user IDs.
* build-packet.c (build_sig_subpkt): Set preferred keyserver flag while
building a preferred keyserver subpacket.
* keylist.c (show_policy_url): Policy URLs might be UTF8.
* keyedit.c (menu_addrevoker): Fix leaking a few bytes.
(ask_algo): Provide key flags for DSA, Elgamal_e, and Elgamal subkeys.
(generate_keypair): Provide key flags for the default DSA/Elgamal keys.
* sig-check.c (signature_check, signature_check2, check_key_signature,
check_key_signature2): Allow passing NULLs for unused parameters in the x2
form of each function to avoid the need for dummy variables. getkey.c,
mainproc.c: Change all callers.
* trustdb.h, trustdb.c (read_trust_options): New. Returns items from the
trustdb version record.
* keylist.c (public_key_list): Use it here for the new "tru" record.
* gpgv.c (read_trust_options): Stub.
unhashed signature cache any longer.
* misc.c (pct_expando): Add two new expandos - signer's fingerprint (%g),
and signer's primary fingerprint (%p).
* Makefile.am: Include W32LIBS where appropriate.
* g10.c (main): Add --rfc2440 alias for --openpgp since in a few months,
they won't be the same thing.
* keyserver.c (parse_keyserver_uri): Accept "http" as an alias for "hkp",
since it is occasionally written that way. (keyserver_spawn): Use
ascii_isspace to avoid locale issues.
* keygen.c (ask_user_id): Make --allow-freeform-uid apply to the email
field as well as the name field, and allow mixing fields when it is set.
* options.skel: Use subkeys.pgp.net as the default keyserver.
* trustdb.c (validate_one_keyblock): Certifications on revoked or expired
uids do not count in the web of trust.
* signal.c (init_one_signal, pause_on_sigusr, do_block): Only use
sigprocmask() if we have sigset_t, and only use sigaction() if we have
struct sigaction. This is for Forte c89 on Solaris which seems to define
only the function call half of the two pairs by default.
(pause_on_sigusr): Typo. (do_block): If we can't use sigprocmask() and
sigset_t, try to get the number of signals from NSIG as well as MAXSIG,
and if we can't, fail with an explanation.
* signal.c, tdbio.c: Comment out the transaction code. It was not used in
this version, and was causing some build problems on quasi-posix platforms
(Solaris and Forte c89).
* keylist.c (list_keyblock_colon): Don't include validity values when
listing secret keys since they can be incorrect and/or misleading. This
is a temporary kludge, and will be handled properly in 1.9/2.0.
* mainproc.c (check_sig_and_print): Only show the "key available from"
preferred keyserver line if the key is not currently present.
* keyedit.c (sign_uids): Do not sign expired uids without --expert (same
behavior as revoked uids). Do not allow signing a user ID without a
self-signature. --expert overrides. Add additional prompt to the
signature level question. (menu_expire): When changing expiration dates,
don't replace selfsigs on revoked uids since this would effectively
unrevoke them. There is also no point in replacing expired selfsigs.
This is bug #181
* g10.c (add_notation_data): Make sure that only ascii is passed to
iscntrl. Noted by Christian Biere.
* getkey.c (classify_user_id2): Replaced isspace by spacep
* keygen.c (ask_user_id): Ditto. (get_parameter_algo): Ditto.
* keyedit.c (keyedit_menu): Ditto.
* tdbdump.c (import_ownertrust): Ditto. s/isxdigit/hexdigitp/.
* revoke.c (ask_revocation_reason):
* keyserver.c (keyserver_spawn): Dito.
getkey.c, keydb.c, openfile.c, plaintext.c, status.c, gpgv.c, keygen.c,
options.h, sig-check.c, tdbio.h, encode.c, mainproc.c, parse-packet.c,
signal.c, textfilter.c: Edit all preprocessor instructions to remove
whitespace before the '#'. This is not required by C89, but there are some
compilers out there that don't like it.
agent is to be used. Noted by Ingo Kl�cker.
(agent_get_passphrase): Inhibit caching when we have no
fingerprint. This is required for key generation as well as for
symmetric only encryption.
* passphrase .c (agent_get_passphrase): New arg CANCELED.
(passphrase_to_dek): Ditto. Passed to above. Changed all
callers to pass NULL.
* seckey-cert.c (do_check): New arg CANCELED.
(check_secret_key): Terminate loop when canceled.
* keyedit.c (change_passphrase): Pass ERRTEXT untranslated to
passphrase_to_dek and translate where appropriate.
* seckey-cert.c (check_secret_key): Ditto.
* keygen.c (ask_passphrase): Ditto.
* passphrase.c (agent_get_passphrase): Translate the TRYAGAIN_TEXT.
Switch the codeset to utf-8.
fully valid keys so that disabled keys are still counted in the web of
trust. (get_ownertrust_with_min): Do the same for the minimum ownertrust
calculation.
* parse-packet.c (dump_sig_subpkt): Show the notation names for
not-human-readable notations. Fix cosmetic off-by-one length counter.
* options.skel: Add explantion and commented-out
"no-mangle-dos-filenames".
* mainproc.c (proc_encrypted): Make string translatable.
* keyserver.c (keyserver_spawn): Quote ':', '%', and any 8-bit characters
in the uid strings sent to the keyserver helper.
* keyring.c (keyring_rebuild_cache): Lock the keyring while rebuilding the
signature caches to prevent another gpg from tampering with the temporary
copy.
* keygen.c (keygen_set_std_prefs): Include AES192 and AES256 in default
prefs.
* keyedit.c (show_prefs): Make strings translatable.
* keydb.c: Double the maximum number of keyrings to 40.
* gpgv.c (main): Fix bug #113 - gpgv should accept the
--ignore-time-conflict option.
* g10.c (main): --openpgp disables --pgpX. Double the amount of secure
memory to 32k (keys are getting bigger these days).
* Makefile.am: Makefile.am: Use @CAPLIBS@ to link in -lcap if we are using
capabilities.
(segfault). Noted by Marcus Brinkmann. Push and reinitialize textmode
filter for each file in a multiple file list.
* packet.h, getkey.c (fixup_uidnode), keyedit.c (show_prefs): Set and show
the keyserver no-modify flag.
* keygen.c (add_keyserver_modify): New. (keygen_upd_std_prefs): Call it
here. (keygen_set_std_prefs): Accept "ks-modify" and "no-ks-modify" as
prefs to set and unset keyserver modify flag.
disabled keys. Keys specified via keyid (i.e. 0x...) are always included.
* getkey.c (get_pubkey_byname, get_seckey_byname2, get_seckey_bynames),
keyedit.c (keyedit_menu, menu_addrevoker): Include disabled keys in these
functions.
* pkclist.c (build_pk_list): Do not include disabled keys for -r or the
key prompt. Do include disabled keys for the default key and
--encrypt-to.
* trustdb.h, trustdb.c (is_disabled): New skipfnc for skipping disabled
keys.
* gpgv.c (is_disabled): Stub.
* keygen.c (keygen_add_key_expire): Properly handle updating a key
expiration to a no-expiration value.
* keyedit.c (enable_disable_key): Comment.
* import.c (import_one): When in interactive mode and --verbose, don't
repeat some key information twice.
RECTYPE_TRUST records a bit.
* g10.c (main): Comment out --list-trust-path until it can be implemented.
* import.c (import_one): Warn when importing an Elgamal primary that this
may take some time (to verify self-sigs). (chk_self_sigs): Try and cache
all self-sigs so the keyblock is written to the keyring with a good rich
cache.
* keygen.c (ask_algo): Make the Elgamal sign+encrypt warning stronger, and
remove the RSA sign+encrypt warning.
Minimal isn't always best.
* sign.c (update_keysig_packet): Use the current time rather then a
modification of the original signature time. Make sure that this doesn't
cause a time warp.
* keygen.c (keygen_add_key_expire): Properly handle a key expiration date
in the past (use a duration of 0).
* keyedit.c (menu_expire): Use update_keysig_packet so any sig subpackets
are maintained during the update.
* build-packet.c (build_sig_subpkt): Mark sig expired or unexpired when
the sig expiration subpacket is added. (build_sig_subpkt_from_sig): Handle
making an expiration subpacket from a sig that has already expired (use a
duration of 0).
* packet.h, sign.c (update_keysig_packet), keyedit.c
(menu_set_primary_uid, menu_set_preferences): Add ability to issue 0x18
subkey binding sigs to update_keysig_packet and change all callers.
expiration date of a subkey. This is not the most optimal solution, but
it is minimal change on the stable branch.
* main.h, keygen.c (do_copy_key_flags): New function to copy key flags, if
any, from one sig to another. (do_add_key_expire): New function to add key
expiration to a sig. (keygen_copy_flags_add_expire): New version of
keygen_add_key_expire that also copies key flags.
(keygen_add_key_flags_and_expire): Use do_add_key_expire.
* import.c (fix_hkp_corruption): Comment.
algorithm name (CAST5, SHA1) rather than the short form (S3, H2).
* main.h, keygen.c (keygen_get_std_prefs), keyedit.c (keyedit_menu):
Return and use a fake uid packet rather than a string since we already
have a nice parser/printer in keyedit.c:show_prefs.
* main.h, misc.c (string_to_compress_algo): New.
* misc.c (checksum_u16_nobug): Removed.
(checksum_u16): Removed the bug emulation.
(checksum_mpi): Ditto.
(checksum_mpi_counted_nbits): Removed and replaced all calls
with checksum_mpi.
* parse-packet.c (read_protected_v3_mpi): New.
(parse_key): Use it here to store it as an opaque MPI.
* seckey-cert.c (do_check): Changed the v3 unprotection to the new
why to store these keys.
(protect_secret_key): Likewise.
* build-packet.c (do_secret_key): And changed the writing.