* tools/gpgconf.c (oStatusFD): New const.
(opts): New option --status-fd.
(statusfp): New var.
(set_status_fd): New.
(gpgconf_write_status): New.
(gpgconf_failure): New.
(main): Set status fd and replace exit by gpgconf_failure.
* tools/gpgconf-comp.c: Repalce exit by gpgconf_failure.
(gc_process_gpgconf_conf): Print a few warning status messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (aApplyProfile): New.
(opts): New command --apply-profile.
(main): Implement that command.
* tools/gpgconf-comp.c (option_check_validity): Add arg VERBATIM.
(change_options_program): Ditto.
(change_one_value): Ditto.
(gc_component_change_options): Ditto.
(gc_apply_profile): New.
--
Here is an example for a profile
--8<---------------cut here---------------start------------->8---
# foo.prf - Sample profile
[gpg]
compliance de-vs
default-new-key-algo brainpoolP256r1+brainpoolP256r1
[gpgsm]
enable-crl-checks
[gpg-agent]
default-cache-ttl 900
max-cache-ttl [] 3600
no-allow-mark-trusted
no-allow-external-cache
enforce-passphrase-constraints
min-passphrase-len 9
min-passphrase-nonalpha 0
[dirmngr]
keyserver hkp://keys.gnupg.net
allow-ocsp
--8<---------------cut here---------------end--------------->8---
Note that flags inside of brackets are allowed after the option name.
The only defined flag for now is "[default]". In case the value
starts with a bracket, it is possible to insert "[]" as a nop-flag.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/loadswdb.c (time_of_saved_swdb): Aslo return the "verified"
timestamp.
(dirmngr_load_swdb): Avoid unnecessary disk or network access witout
FORCE. Do not update swdb.lst if it did not change.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (query_swdb): Insert new field with the installed
version. Check that the supplied version does not contain a colon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (aQuerySWDB): New.
(opts): Add --query-swdb.
(valid_swdb_name_p): New.
(query_swdb): New.
(main): Implement command --query-swdb.
--
Right now this command is not very useful because dimngr has not yet
been changed to create the swdb.lst. For manual tests the swdb.lst
file from the Net can be used with these additional lines:
.filedate 20161102T130337
.verified 20161102T150000
--
The commands --help, --version, --dump-options are special in that
they can't be abbreciated on the command line. This is to avoid
problems with regular options with the same prefix.
Fixes-commit: 0a27d8a57c4c990fcada4278a1ce2e6fc9043e9
Signed-off-by: Werner Koch <wk@gnupg.org>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* tools/gpgconf.c (main) <aListDir>: Factor code out to ...
(list_dirs): new. Rewrite to use a table. Allow selection of a
items. Add "agent-ssh-socket".
--
This change makes the use of gpgconf in scripts easier. For example,
to set the envvar with the name of the socket used by ssh, it is now
possible to do this:
SSH_AUTH_SOCK="$(gpgconf --list-dirs agent-ssh-socket)"
which guarantees that the right name is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgsm-gencert.sh: remove deprecated script entirely. It is
fully replaced by gpgsm --gen-key
* doc/tools.texi: remove gpgsm-gencert.sh documentation
* .gitignore: no longer ignore gpgsm-gencert.sh manpage
* doc/Makefile.am: quit making the manpage
* tools/Makefile.am: quit distributing the script
* doc/howto-create-a-server-cert.texi: overhaul documentation to use
gpgsm --gen-key and tweak explanations
--
The commit deprecating gpgsm-gencert.sh
(81972ca7d53ff1996e0086702a09d4405bdc2a7e) dates back exactly 6 years.
https://codesearch.debian.net/results/gpgsm-gencert.sh
suggests that in all of debian it is only referenced in documentation
(for poldi and scute) and example files (libept), and isn't actually
used directly anywhere.
Furthermore, trying to use gpgsm-gencert.sh to make a simple webserver
certificate-signing request failed for me, following the examples in
doc/howto-create-a-server-cert.texi exactly.
It's time we ripped off this band-aid :)
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* doc/mkdefsinc.c: New.
* doc/Makefile.am: Include cmacros.am.
(EXTRA_DIST): Add mkdefsinc.c defsincdate.
(BUILT_SOURCES): Add defsincdate
(CLEANFILES): Add mkdefsinc and defs.inc.
(mkdefsinc): New rule.
(yat2m-stamp): Depend on defs.inc.
($(myman_pages) gnupg.7): Ditto.
(gnupg.texi): Remove rule to touch itself.
(dist-hook): New.
(defsincdate): New.
(defs.inc): New.
* doc/gnupg.texi: Remove inclusion of version.texi. Include defs.inc.
Also include defs.inc in all files used to build man files. Change
fixed directory names to those from defs.inc.
--
GnuPG-bug-id: 1661
Signed-off-by: Werner Koch <wk@gnupg.org>
--
GnuPG-bug-id: 1602
I added options shown with --help but missing in the man page.
However, --help won't show everything listed in the man age and
frankly there are even more options not listed anywhere (to see them
use --dump-options).
* agent/gpg-agent.c (oDebugQuickRandom): New.
(opts): New option --debug-quick-random.
(main): Use new option.
* common/asshelp.c (start_new_gpg_agent): Add hack to pass an
additional argument for the agent name.
* tests/openpgp/defs.inc: Pass --debug-quick-random to the gpg-agent
starting parameters.
* tests/openpgp/version.test: Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
This solves a problem where ccid was used, the card unplugged and then
scdaemon tries to find a new (plugged in) reader and thus will
eventually try PC/SC over and over again.
Also added an explicit --kill command to gpgconf.
