* g10/sig-check.c (check_signature2): Replace arg PK by R_PK and
change the semantics. Also clear the other R_ args on function entry,
use gpg_error() and change retturn type to gpg_error_t.
* g10/mainproc.c (do_check_sig): Add arg R_PK.
(list_node): Pass NULL for new arg.
(check_sig_and_print): Rework to make use of the returned PK.
--
The output
gpg: textmode signature, digest algorithm SHA256, key algorithm rsa2048
showed the pubkey algo of the primary key which was surprising.
Changed to print the algo of the subkey used for verification.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sig-check.c (check_signature2): Not only subkey, but also primary
key should have flags.valid=1.
--
The tweak of gpgv in e32c575e0f3704e7563048eea6d26844bdfc494b only makes
sense with this change.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/sig-check.c (check_key_signature2): If SIG->CLASS is
unsupported, show some debugging information. Don't use BUG to fail.
Just return GPG_ERR_BAD_SIGNATURE.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/sig-check.c (hash_uid_node): Rename from this...
(hash_uid_packet): ... to this. Take a PKT_user_id instead of a
KBNODE.
(check_key_signature2): Split the basic signature checking
functionality into...
(check_signature_over_key_or_uid): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/sig-check.c (check_signature_end): Break the basic signature
check into...
(check_signature_end_simple): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/sig-check.c (check_signature_metadata_validity): Use days if
useful.
--
Using days instead of a high number of seconds is for the majority of
users a better measurement.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
I am considering some changes and thus better start off by switching
to standard GNU indentation. This patch also changes comment lines
like
if (foo)
/* Comment on foo. */
{
to
if (foo)
{ /* Comment on foo. */
or
if (foo) /* Comment on foo. */
{
to make the brace of the opening block stand out immediately.
Further stars on the left are added to longer comments because that
makes the code easier to read by disabled hackers, when reading
without font locking, and for reading black-white printouts.
* g10/main.h: Add rejection_shown flag to each weakhash struct
* g10/misc.c (print_digest_algo_note, additional_weak_digest): Do not
treat MD5 separately; (print_digest_rejected_note): Use
weakhash.rejection_shown instead of static shown.
* g10/options.h (opt): Change from additional_weak_digests to
weak_digests.
* g10/sig-check.c: Do not treat MD5 separately.
* g10/gpg.c (main): Explicitly set MD5 as weak.
* g10/gpgv.c (main): Explicitly set MD5 as weak.
--
Previously, only one weak digest rejection message was shown, of
whichever was the first type encountered. This meant that if "gpg
--weak-digest SHA224" encountered both an MD5 digest and a SHA224
digest, it would only show the user that the MD5 digest was rejected.
In order to let the user know which algorithms were rejected, we
needed to move the "shown" flag into a per-weak-algorithm location.
Given this additional complication, it made no sense to continue to
treat MD5 specially, so it is added as a default weak algorithm in the
same opt.weak_digests data structure as any other.
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/main.h: Improve function documentation.
* g10/packet.h.h: Improve function documentation.
* g10/sig-check.c: Improve function documentation and some comments.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/misc.c (print_md5_rejected_note): Rename to ..
(print_digest_rejected_note): this. Parameterize function to take an
enum gcry_md_algos.
* g10/sig-check.c: Use print_digest_rejected_note() when rejecting
signatures.
--
76afaed65e3b0ddfa4923cb577ada43217dd4b18 allowed extra --weak-digests,
but removed the one call to print_md5_rejected_note(). This replaces
and generalizes that warning.
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/options.h: Add additional_weak_digests linked list to opts.
* g10/main.h: Declare weakhash linked list struct and
additional_weak_digest() function to insert newly-declared weak
digests into opts.
* g10/misc.c: (additional_weak_digest): New function.
(print_digest_algo_note): Check for deprecated digests; use proper
gcry_md_algos type.
* g10/sig-check.c: (do_check): Reject weak digests in addition to MD5.
* g10/gpg.c: Add --weak-digest option to gpg.
* doc/gpg.texi: Document gpg --weak-digest option.
* g10/gpgv.c: Add --weak-digest option to gpgv.
* doc/gpgv.texi: Document gpgv --weak-digest option.
--
gpg and gpgv treat signatures made over MD5 as unreliable, unless the
user supplies --allow-weak-digests to gpg. Signatures over any other
digest are considered acceptable.
Despite SHA-1 being a mandatory-to-implement digest algorithm in RFC
4880, the collision-resistance of SHA-1 is weaker than anyone would
like it to be.
Some operators of high-value targets that depend on OpenPGP signatures
may wish to require their signers to use a stronger digest algorithm
than SHA1, even if the OpenPGP ecosystem at large cannot deprecate
SHA1 entirely today.
This changeset adds a new "--weak-digest DIGEST" option for both gpg
and gpgv, which makes it straightforward for anyone to treat any
signature or certification made over the specified digest as
unreliable.
This option can be supplied multiple times if the operator wishes to
deprecate multiple digest algorithms, and will be ignored completely
if the operator supplies --allow-weak-digests (as before).
MD5 is still always considered weak, regardless of any further
--weak-digest options supplied.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Capitialized some comments, shorted a line in do_check, and changed
subject to name the option. -wk
* g10/sig-check.c (signature_check2): Avoid copying PK to RET_PK.
Instead, directly use the provided storage. If none is provided
allocate some.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/sign.c (sign_file): Use log_printf instead of stderr.
* g10/tdbdump.c (export_ownertrust): Use estream fucntions.
(import_ownertrust): Ditto.
* g10/tdbio.c (tdbio_dump_record): Ditto. Change arg to estream_t.
--
Reported-by: Guilhem Moulin <guilhem@fripost.org>
Needed for unattended key edits with --status-fd, because since 2.1
status prompts are preceded by es_fflush (in cpr.c:do_get_from_fd)
not fflush(3), so the standard output may not be flushed before each
prompt. (Which breaks scripts using select(2) to multiplex between
the standard and status outputs.)
His patch only affected print_and_check_one_sig_colon() but there are
many more places where stdio and estream are mixed. This patch now
replaces most of them in g10/. At some places stdio is still used,
but that is local to a function and should not have side effects.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.h (g10_errstr): Remove macro and change all occurrences by
gpg_strerror.
(G10ERR_): Remove all macros and change all occurrences by their
GPG_ERR_ counterparts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sig-check.c (do_check): Move some code to ...
* g10/misc.c (print_md5_rejected_note): new function.
* g10/mainproc.c (proc_tree, proc_plaintext): Enable MD5 workaround
only if option --allow-weak-digest-algos is used.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
to libgcrypt functions, using shared error codes from libgpg-error,
replacing the old functions we used to have in ../util by those in
../jnlib and ../common, renaming the malloc functions and a couple of
types. Note, that not all changes are listed below becuause they are
too similar and done at far too many places. As of today the code
builds using the current libgcrypt from CVS but it is very unlikely
that it actually works.
function as they may not have all their fields filled in.
* sig-check.c (signature_check2): Use new is_primary flag to check rather
than comparing main_keyid with keyid as this still works in the case of a
not fully filled in pk.
* keyedit.c (menu_addrevoker): The direct key signature for revocation
keys must be at least v4 to carry the revocation key subpacket. Add a PGP
2.x warning for revocation keys.
* g10.c (check_permissions): Rearrange strings to make translating easier
(don't incorporate string parts).
* keyedit.c (sign_uids): Make strings translatable.
* sig-check.c (check_key_signature2): Make string translatable.
2002-09-13 David Shaw <dshaw@jabberwocky.com>
* getkey.c (check_revocation_keys): Move....
* main.h, sig-check.c (check_revocation_keys): to here. Also
return the signature_check error code rather than 0/1 and cache
the sig result.
* sig-check.c (check_key_signature2): Divert to
check_revocation_keys if a revocation sig is made by someone other
than the pk owner.
* getkey.c (merge_selfsigs_main): Tidy.
2002-09-13 Werner Koch <wk@gnupg.org>
* g10.c (main) [__MINGW32__]: Activate oLoadExtension.
