* common/status.h (STATUS_FAILURE): New.
* g10/cpr.c (write_status_failure): New.
* g10/gpg.c (main): Call write_status_failure for all commands which
print an error message here.
* g10/call-agent.c (start_agent): Print an STATUS_ERROR if we can't
set the pinentry mode.
--
This status line can be used similar to the error code returned by
commands send over the Assuan interface in gpgsm. We don't emit them
in gpgsm because there we already have that Assuan interface to return
proper error code. This change helps GPGME to return better error
codes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse): Use an int to compare to -1. Use
buf32_to_ulong.
--
Regression-due-to: 0add91ae1c
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_signature): Change revkey's type from a struct
revocation_key ** to a struct revocation_key *. Update users.
--
revkey was a pointer into the raw data. But, C doesn't guarantee that
there is no padding. Thus, we copy the data.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse): We don't handle copying packets with a
partial body length to an output stream. If this occurs, log an error
and abort.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (dbg_copy_all_packets): Check that OUT is not
NULL.
(copy_all_packets): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse_signature): Make sure PKTLEN doesn't
underflow. Be more careful that a read doesn't read more data than
PKTLEN says is available.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* po/POTFILES.in (trust.c): Add missing file.
* po/de.po: Changed German validity strings.
* doc/help.de.txt: Ditto.
--
Note that I replaced "uneingeschränkt" in de.po to "ultimativ" to
make the output better readable.
* g10/packet.h: Add documentation for functions defined in
parse-packet.c.
* g10/parse-packet.c: Improve comments for many functions.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/packet.h (enum_sig_subpkt): Remove argument RET_N. Update
callers.
* g10/parse-packet.c (enum_sig_subpkt): Remove argument RET_N.
--
Remove the RET_N argument, because it is unused and because it is
meaningless: it's not clear whether it is an offset into SIG->HASHED
or SIG->UNHASHED.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (mpi_read): Improve documentation. Correctly
handle an EOF. On overflow, correctly return the number of bytes read
from the pipeline.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_read): Make control flow more obvious.
(iobuf_get_filelength): Likewise.
(iobuf_get_fd): Likewise.
(iobuf_seek): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_alloc): Check that BUFSIZE is not 0.
(iobuf_readbyte): Check that A is an input filter. Check that the
amount of read data is at most the amount of buffered data.
(iobuf_read): Check that A is an input filter.
(iobuf_writebyte): Check that A is not an input filter.
(iobuf_writestr): Check that A is not an input filter.
(iobuf_flush_temp): Check that A is not an input filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the head filter is a temp
filter, use IOBUF_BUFFER_SIZE for the new filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the pipeline is an output or
temp pipeline, the new filter shouldn't assume ownership of the old
head's internal buffer: the data was written before the filter was
added.
* common/t-iobuf.c (double_filter): New function.
(main): Add test cases for the above bug.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_temp_to_buffer): Flush each filter in the
pipeline and copy the data from the last (not the first) filter's
internal buffer.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (do_open): New function, which is a generalization of
iobuf_open, iobuf_Create, iobuf_openrw.
(iobuf_open): Call do_open.
(iobuf_create): Likewise.
(iobuf_openrw): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (iobuf_open_fd_or_name): Remove prototype. Replace
use with either iobuf_open or iobuf_fdopen_nc, as appropriate.
* common/iobuf.c (iobuf_open): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_cancel): Don't abort freeing a pipeline if
freeing a filter fails. This needs to a memory leak. Instead, keep
freeing and return the error code of the first filter that fails.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (underflow): Take additional parameter
clear_pending_eof. If not set, don't clear a pending eof when
returning EOF. Update callers.
(iobuf_peek): Fill the internal buffer, if needed, to be able to
better satisfy any request.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (underflow): Don't require that the buffer be empty.
When called, fill any available space.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_read_line): Be more careful with boundary
conditions.
* common/iobuf.h: Include <gpg-error.h>.
* common/t-iobuf.c: New file.
* common/Makefile.am (module_tests): Add t-iobuf.
(t_mbox_util_LDADD): New variable.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_temp_with_content): Set the filter type to
IOBUF_INPUT, not IOBUF_TEMP, which is only for output filters that
write into a dynamic buffer.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (struct iobuf_struct): Remove field desc.
* common/iobuf.c (iobuf_desc): New function. When a filter's
description is needed, use this instead of the filter's desc field.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (struct iobuf_struct): Clarify semantics of nofast.
Simplify use of nofast to implement just these semantics.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c: Move BLOCK_FILTER_INPUT,
BLOCK_FILTER_OUTPUT_BLOCK_FILTER_TEMP from here...
* common/iobuf.h: ... to here and rename to IOBUF_INPUT, IOBUF_OUTPUT
and IOBUF_TEMP, respectively. Where appropriate, use these macros
instead of a literal.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* kbx/keybox.h (KEYBOX_WITH_X509): Do not define.
* sm/Makefile.am (AM_CPPFLAGS): Define it here.
(common_libs): Change to libkeybox509.a
* g10/Makefile.am (AM_CFLAGS): remove KSBA_CFLAGS.
(gpg2_LDADD, gpgv2_LDADD): Remove KSBA_LIBS
* kbx/Makefile.am (noinst_LIBRARIES): Add libkeybox509.a.
(libkeybox509_a_SOURCES): New.
(libkeybox_a_CFLAGS): New.
(libkeybox509_a_CFLAGS): New.
(kbxutil_CFLAGS): New.
* kbx/keybox-search.c (has_keygrip) [!KEYBOX_WITH_X509]: Declare args
as unused.
--
There is no real need to link to Libksba in gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_get_passphrase): Don't repeat passphrase for
pinentry loopback mode.
* agent/genkey.c (check_passphrase_constraints): Immediately return when
pinentry mode is loopback.
--
Fixes endless loop when inquiring a passphrase with
pinentry-mode=loopback that may not satisfy passphrase contraints.
* common/status.h (INQUIRE_MAXLEN): New.
* g10/call-agent.c (default_inquire_cb): Send STATUS_INQUIRE_MAXLEN.
client when inquiring a passphrase over pinentry-loopback.
--
This is to inform a user about the maximum length of a passphrase. The
limit is the same that gpg-agent uses.
* g10/gpg.c (main): test for --command-fd during --gen-key parse.
When --command-fd is set then imply --batch to let gpg inquire a
passphrase rather than requiring a pinentry.
