* scd/app-openpgp.c (determine_rsa_response): Round bits up.
--
Co-authored-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Arnaud wrote:
Actually, when the incorrect expected response length (i.e. Le
field) is transmitted to the card, the card's answer is missing a
byte (i.e. ... 6101) so an additional command has to be sent to the
card to retrieve the last byte. Using the correct length avoids to
send the additional command to retrieve the missing byte, when the
computed length is wrong.
Note that an value of 65537 for E is pretty standard and thus we can
avoid the 6101 return code inmost cases.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (data_objects): Special DOs like "Login Data",
"URL", "Private DO N" can be longer size >= 256.
(struct app_local_s): Define bits for v3 card.
(get_cached_data): Use extcap.max_special_do for special DOs.
(app_select_openpgp): Detect if extcap_v3, kdf_do, and other bits.
--
GnuPG-bug-id: 3262
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (get_prompt_info): Change texts.
* agent/call-pinentry.c (struct entry_features): New.
(getinfo_features_cb): New.
(start_pinentry): Set new fucntion as status callback.
(build_cmd_setdesc): New. Replace all snprintf for SETDESC by this
one.
--
Suggested-by: Andre Heinecke
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/app-openpgp.c (get_prompt_info): Change wording and order
slightly.
--
The word "Card" was repeated too much in the prompt and moving
signatures to the bottom results in a more consistent layout
between the prompts with signcount and the prompts without.
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* scd/app-openpgp.c (get_disp_name): New.
(get_disp_serialno): New.
(get_prompt_info): New.
(build_enter_admin_pin_prompt): Rework the prompt texts. Factor some
code out to ...
(get_remaining_tries): New.
(verify_a_chv): Print a remaining counter also for the standard PIN.
Rework the prompt texts.
* agent/divert-scd.c (ask_for_card): Pretty format an OpenPGP serial
no.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_get_serial_and_stamp): Remove.
(app_get_serialno): New.
(app_write_learn_status): Use send_status_direct.
(app_getattr): Use app_get_serialno for SERIALNO and
send with send_status_direct.
* scd/app-openpgp.c (do_getattr): Likewise.
* scd/command.c (cmd_serialno): Don't send TIMESTAMP of 0.
(cmd_learn): Likewise. Don't inquire with TIMESTAMP of 0.
--
In the SERIALNO protocol, timestamp used to be considered, but had never
used at all. In the new implementation, removed card/token is always
detected and connection becomes invalid, no timestamp is required any
more. Examined scute and poldi as well for this protocol change.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/openpgp-oid.c (openpgp_is_curve_supported): Add optional arg
R_ALGO and change all callers.
* common/util.h (GPG_ERR_UNKNOWN_FLAG): New error code.
* g10/options.h (struct opt): Add field DEF_NEW_KEY_ALGO.
* g10/gpg.c (oDefaultNewKeyAlgo): New enum.
(opts): New option "--default-new-key-algo".
(main): Set the option.
* g10/keygen.c: Remove DEFAULT_STD_ FUTURE_STD_ constants and replace
them by ...
(DEFAULT_STD_KEY_PARAM, FUTURE_STD_KEY_PARAM): new string constants.
(get_keysize_range): Remove arg R_DEF and return that value instead.
Change all callers.
(gen_rsa): Use get_keysize_range instead of the removed
DEFAULT_STD_KEYSIZE.
(parse_key_parameter_part): New function.
(parse_key_parameter_string): New function.
(quick_generate_keypair): Refactor using parse_key_parameter_string.
(generate_keypair): Ditto.
(parse_algo_usage_expire): Ditto.
--
This new option is intended to be used in the forthcoming
--set-profile command of gpgconf. It allows to provide a gpg
configuration with custom defaults for a new key using the simple
commands which use the default algorithm set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (struct app_local_s): Remove max_cmd_data and
max_rsp_data fields as Extended Capabilities bits are different.
(get_cached_data) Use extcap.max_certlen_3.
(get_one_do): Don't use exmode=1.
(determine_rsa_response): New.
(get_public_key, do_genkey): Call determine_rsa_response.
(do_sign): Use keyattr[0].rsa.n_bits / 8, instead of max_rsp_data.
(do_auth): Use keyattr[2].rsa.n_bits / 8, instead of max_rsp_data.
(do_decipher): Likewise with Use keyattr[1].rsa.n_bits / 8.
(show_caps): Remove max_cmd_data and max_rsp_data.
(app_select_openpgp): Likewise.
--
OpenPGP card V3 had introduced incompatible change in Extended
Capabilities bits. We can work around by this change by not
using those bits.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_decipher): When it's x-coordinate only, add the
prefix 0x41.
--
Card should return fixed size bytes, either in format of
(04 || X || Y) or (X, x-coordinate only).
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (send_key_attr): Use curve instead of OID.
(ecdh_params): New.
(ecc_read_pubkey): Use ecdh_params. Use curve name.
(ecc_writekey): Likewise.
(ecc_curve): Rename from ecc_oid.
(parse_algorithm_attribute): Use ecc_curve.
* g10/call-agent.c (learn_status_cb): Use openpgp_is_curve_supported to
intern the curve name string.
* g10/card-util.c (card_status): Conver curve name to alias for print.
--
Now, sdcaemon answer for KEY-ATTR is in the canonical curve name
instead of the alias. Since it is used of key generation for
card encryption key with backup, it should be canonical name.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keygen.c (generate_keypair): For card key generation, fill
parameters by KEY-ATTR.
* scd/app-openpgp.c (ecc_read_pubkey): OID should be freed at last,
after its reference by OIDBUF is finished.
(ecc_writekey): Likewise.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (rsa_read_pubkey, ecc_read_pubkey): New.
(read_public_key): New.
(get_public_key, do_genkey): Use read_public_key.
--
With this change, since GENKEY updates the public key (pk[keyno].key) in
APP, READKEY will be possible after the command even for the old
card (version <= 0x0100).
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (get_public_key): Fix a message.
(change_keyattr_from_string, ecc_writekey): Call mpi_release sooner.
(do_genkey): Add ECC support.
--
In OpenPGP card specification 3.0, ECC is introduced. So far, do_genkey
only supported RSA. Since KDF spec. is needed to calculate the
fingerprint, it is hard coded in app-openpgp.c. But it's defined by
OpenPGP ECC (RFC-6637), and card does nothing with KDF in fact.
Co-authored-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/iso7816.c (do_generate_keypair): Use const char * for DATA.
(iso7816_generate_keypair, iso7816_read_public_key): Likewise.
* scd/app-openpgp.c (get_public_key): Follow the change.
(do_genkey): Ditto. Use ERR instead of RC. Use u32 for CREATED_AT.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (build_ecc_privkey_template): Size can be greater
than 128 when it comes with public key for curve of larger field.
--
Reported-by: Arnaud Fontaine <arnaud.fontaine@ssi.gouv.fr>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (ECC_FLAG_PUBKEY): New.
(send_key_attr, get_public_key, ecc_writekey, do_auth, do_decipher)
(parse_algorithm_attribute): Check ECC_FLAG_DJB_TWEAK.
(build_ecc_privkey_template): Add ECC_Q and ECC_Q_LEN.
Support offering public key when ECC_FLAG_PUBKEY sets.
(ecc_writekey): Supply ECC_Q and ECC_Q_LEN.
(parse_algorithm_attribute): Parse pubkey-required byte.
--
OpenPGPcard protocol specification version 3.2 supports algorithm
attributes for ECC key which specifies public key data is required for
"keytocard" command. This change supports the feature.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_genkey): Strip leading zeros for fingerprint
computation.
--
This bug is difficult to reproduce because the probability is 1/256,
and key generation takes long time. The regression was introduced
when we add the support for ECC.
GnuPG-bug-id: 2150
* scd/app-openpgp.c (do_decipher): Handle trancated cipher text.
Also fix xfree bug introduced.
--
In old format with no prefix, cipher text can be trancated when it
is parsed as MPI. Recover the value adding back zeros.
Fixes-commit: 11b2691edd
* scd/app-openpgp.c (do_decipher): Check 0x02 also for 16+1 byte long
INDATA.
(do_decipher): Fix integer arithmetic in void pointer.
(do_decipher): Add missing memcpy.
--
I have not tested this fix but it is obvious.
Fixes-commit: 11b2691edd
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (get_public_key): Improve error handling.
--
Found using the Clang Static Analyzer.
Signed-off-by: Justus Winter <justus@g10code.com>
* scd/app-openpgp.c (change_rsa_keyattr): New.
(change_keyattr_from_string): Use change_rsa_keyattr.
(rsa_writekey): Call change_rsa_keyattr when different size.
(ecc_writekey): Try to change key attribute.
* agent/cvt-openpgp.c (get_keygrip): Handle Curve25519.
(convert_secret_key, convert_transfer_key): Ditto.
* common/openpgp-oid.c (oidtable): Add Curve25519.
(oid_crv25519, openpgp_oid_is_crv25519): New.
* common/util.h (openpgp_oid_is_crv25519): New.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Handle the case
with Montgomery curve which uses x-only coordinate.
* g10/keygen.c (gen_ecc): Handle Curve25519.
(ask_curve): Change the API and second arg is to return subkey algo.
(generate_keypair, generate_subkeypair): Follow chage of ask_curve.
* g10/keyid.c (keygrip_from_pk): Handle Curve25519.
* g10/pkglue.c (pk_encrypt): Handle Curve25519.
* g10/pubkey-enc.c (get_it): Handle the case with Montgomery curve.
* scd/app-openpgp.c (ECC_FLAG_DJB_TWEAK): New.
(send_key_attr): Work with general ECC, Ed25519, and Curve25519.
(get_public_key): Likewise.
(ecc_writekey): Handle flag_djb_tweak.
--
When libgcrypt has Curve25519, GnuPG now supports Curve25519.
* common/openpgp-oid.c (openpgp_oid_to_curve): Add CANON argument.
* common/util.h: Update.
* g10/import.c (transfer_secret_keys): Follow the change.
* g10/keyid.c (pubkey_string): Likewise.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Likewise.
* parse-packet.c (parse_key): Likewise.
* scd/app-openpgp.c (send_key_attr, get_public_key): Likewise.
--
Change the function so that caller can select canonical name of curve
or name for printing. Suggested by wk.
* scd/app-openpgp.c (send_key_attr): Send KEYNO.
(get_public_key): Fix SEXP composing.
(ecc_writekey): Fix OID length calculation.
(ecc_oid): Prepend the length before query.
(parse_algorithm_attribute): Handle the case the curve is not available.
* g10/call-agent.h (struct agent_card_info_s): Add curve field.
* g10/call-agent.c (learn_status_cb): Use curve name.
* g10/card-util.c (card_status): Show pubkey name.
* scd/app-openpgp.c (struct app_local_s): Record OID and flags.
(store_fpr): Use ALGO instead of key type.
(send_key_attr): Use curve name instead of OID.
(get_public_key): Clean up by OID to curve name.
(ecc_writekey): Support any curves in libgcrypt.
(do_genkey, do_auth, ): Follow the change.
(ecc_oid): New.
(parse_algorithm_attribute): Show OID here.
* g10/card-util.c (do_change_keysize): Put "rsa".
* scd/app-openpgp.c (change_keyattr, change_keyattr_from_string):
Change the command format.
(rsa_writekey): Check key type.
(do_writekey): Remove "ecdh" and "ecdsa" support which was available
in experimental libgcrypt before 1.6.0.
