* scd/app-openpgp.c (pin2hash_if_kdf): DEK had been changed to pointer
to allocated memory, so, we need to use DEKLEN for the length.
--
GnuPG-bug-id: 7121
Fixes-commit: 20e85585ed
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_change_pin): Fix PIN length check. Add "R"
flag to the reset code prompt.
--
When using the reset code it was not possible to set a PIN of length
6. The "R" flags fixes a funny prompt.
Fixes-commit: efe325ffdf
* scd/app-openpgp.c (do_change_pin): Make sure new PIN length
is longer than MINLEN.
--
GnuPG-bug-id: 6843
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 2376cdff13)
* scd/app-openpgp.c (wipe_and_free_string, wipe_and_free): Enable
functions.
(pin2hash_if_kdf): Change interface. The input PIN is not anymore
changed. Further there are no more assumptions about the length of
the provided buffer.
(verify_a_chv): Adjust for changed pin2hash_if_kdf.
(verify_chv2): Ditto
(verify_chv3): Ditto.
(do_change_pin): Ditto.
(do_sign): Ditto.
--
Note that this a part of the patch
63bda3aad8 which we used in 2.4 to
implement a PIN cache. For easier backporting we need to add this
here.
* scd/app-openpgp.c (ecc_writekey): Remove the useless check and print
a diagnostic if the default params are used.
--
Note that here in 2.2 we use different default ECDH parameters than in
2.4 (AES192 instead of AES256 for 384 bit curves).
GnuPG-bug-id: 6378
* scd/app-openpgp.c (check_keyidstr): Ignore the card version and also
compare case insensitive.
(do_learn_status): Add mssing error handling.
--
This is required because we changed what we emit as serialno of
OpenPGP cards but existing keys still use the old form of the serial
number (i.e. with a firmware version). This is so that existing stub
keys of gpg-agent will continue to work.
GnuPG-bug-id: 5100
* scd/app-openpgp.c (do_readkey): Allow the keygrip for the keyid.
Use case insensitive match forthe keyid.
(do_readcert): Allow the keygrip for the keyid.
--
This patch is only to sync ths up with master.
* scd/app-openpgp.c (retrieve_fprtime_from_card): New.
(send_keypair_info): Add more to KEYPAIRINFO.
--
This is mainly needed to sync this version with master.
* scd/app-openpgp.c (wipe_and_free): New.
(wipe_and_free_string): New.
(get_disp_serialno): Remove. Replace callers by function
app_get_dispserialno.
(get_usage_string): New.
(send_keypair_info): Use new function.
--
The new function has the same behaviour. The wipe functions are
not yet used.
* cd/app-openpgp.c (data_objects): Add 0x00FA.
(do_getattr): Add KEY-ATTR-INFO.
--
See the section 4.4.3.11 Algorithm Information in the OpenPGP card
functional specification version 3.4.1.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 90d0072165)
Some parts where already here.
* scd/app-openpgp.c (do_getattr): New attrubute "UIF".
(do_learn_status): Use that.
--
Actually this is not just convenience but will make it easier to add
new keys to an openpgp card - we will need to change this only at one
place.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 11f0700282)
* scd/app-openpgp.c (struct app_local_s): Add ecc.algo field.
(send_key_attr): Use ecc.algo field.
(ecc_read_pubkey): Use ecc.algo field.
(ecc_writekey): Ed448 means EdDSA.
(parse_algorithm_attribute): Set ecc.algo field from card.
Add checking for Ed25519 for ECC_FLAG_DJB_TWEAK flag.
--
There used to be a possible support of Ed25519 with ECDSA, (instead of
EdDSA). To distinguish key for Ed25519 for EdDSA, we use the
flag: (flags eddsa). Ed448 has no support for ECDSA and defaults to
EdDSA even if no such flag.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit b743942a97)
* scd/app-openpgp.c (ecc_writekey): Use provided ECDH params to
compute the fingerprint. Add a default for use by gnupg 2.2.
(store_fpr): Add arg update.
(rsa_read_pubkey, ecc_read_pubkey): Add arg meta_update and avoid
writing the fingerprint back to the card if not set.
(read_public_key): Also add arg meta_update.
(get_public_key): Do not pass it as true here...
(do_genkey): ... but here.
--
This is based on commit c03ba92576 and
done here to ease backporting. There is no functional change.
GnuPG-bug-id: 6378
* scd/app-openpgp.c (data_objects): Capitalize the word for usage.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit e6b7e0ff99)
* g10/card-util.c (uif, cmdUIF): New.
(card_edit): Add call to uif by cmdUIF.
* scd/app-openpgp.c (do_getattr): Support UIF-1, UIF-2, and UIF-3.
(do_setattr): Likewise.
(do_learn_status): Learn UIF-1, UIF-2, and UIF-3.
--
GnuPG-bug-id: 4158
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 0cb65564e0)
Also included the relevant part from
commit 0240345728
Note that this patch is mainly to simplifying backporting and not to
support the UIF.
* scd/app-openpgp.c (struct app_local_s): Add new flag.
(get_cached_data): Force chace use if flag is set.
(app_select_openpgp): Avoid reading DO 6E multiple times.
--
The do not cache property of 6E was introduced so that we can change
for example key attributes without getting into with the cache.
However, for initial reading the cache makes a lot of sense and thus we
now use this hack to only temporary cache. A better strategy would be
to clear the cache when we change card data but that is more error
prone.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit d5fb598323)
* scd/iso7816.c (CMD_SELECT_DATA): New.
(iso7816_select_data): New.
* scd/app-openpgp.c (do_readcert): Allow OpenPGP.1 and OPENPGP.2
(do_writecert): Ditto.
(do_setattr): Add CERT-1 and CERT-2.
--
This has been tested with a Zeitcontrol 3.4 card. A test with a
Yubikey 5 (firmware 5.2.6) claiming to support 3.4 failed.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 37b1c5c200)
* scd/app-openpgp.c (do_change_pin): Allow prefixing the CHVNO with
"OPENPGP."
--
The generic keyref allows for better error detection in case a keyref
is send to a wrong card. This has been taken from master commit
3231ecdafd which has additional changed
for gpg-card-tool, which is only available there.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 6651a0640d)
* scd/app-openpgp.c (count_sos_bits): New. Count as sos_write does.
(store_fpr): For ECC, use count_sos_bits.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 95156ef9bf)
and
(cherry picked from commit f482e4bd12)
* scd/app-openpgp.c (struct app_local_s): s/extcap_v3/is_v3/.
s/max_certlen_3/max_certlen. Change users.
--
The extcap_v3 flag is set if the version is 3 or later and as such
does not only declare that the v3 extcap layout is used. Make this
clear by renaming.
Likewise for max_certlen_3.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit bbdb48ec0d)
* common/sexputil.c (get_rsa_pk_from_canon_sexp): Also allow private
keys.
(pubkey_algo_string): Ditto.
* scd/app-openpgp.c (do_writekey): Switch key attributes
--
The scd WRITEKEY command for OpenPGP cards missed proper support to
aautomagically switch key attributes based on the new key. We had
this only in GENKEY.
GnuPG-bug-id: 6378
* scd/app-openpgp.c (data_objects): 0x00FA for binary data.
(do_getattr): Parse the data and send it in status lines.
(get_algorithm_attribute_string): New.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Backported-from-master: eba2563dab
Backported-from-master: 43bbc25b0f
* scd/app-openpgp.c (struct app_local_s): Add field keyalgo.
(parse_algorithm_attribute): Store the new keyalgo field.
(change_keyattr): Change info message.
(change_keyattr_from_string): Rewrite to also accept a keyref and a
keyalgo string.
(do_genkey): Change the keyattr if a keyalgo string is given.
* scd/command.c (cmd_genkey): Add option --algo.
--
Having this feature makes it easier to use OpenPGP cards in a similar
way to other cards. Note that the explicit changing via SETATTR is
still supported.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit d7d75da505)
(cherry picked from commit b349adc5c0)
* scd/app-openpgp.c (parse_algorithm_attribute): Return the error.
(change_keyattr): Follow the change.
(app_select_openpgp): Handle the error of parse_algorithm_attribute.
--
Backport master commit of:
53eddf9b9e
This change allows following invocation of app_select_openpgp, which
may work well (if the problem is device side for initial connection).
GnuPG-bug-id: 5963
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.h (opt): Add field opcsc_shared.
* scd/scdaemon.c (opcscShared): New.
(opts): Add "--pcsc-shared".
(main): Set flag.
* scd/apdu.c (connect_pcsc_card): Use it.
(pcsc_get_status): Take flag in account.
* scd/app-openpgp.c (verify_chv2): Do not auto verify chv1 in shared
mode.
--
This option should in general not be used. The patch tries to limit
bad effects but using shared mode is somewhat dangerous depending on
the other PC/SC users.
(cherry picked from commit 5732e7a8e9)
* common/openpgp-oid.c (openpgp_curve_to_oid): Add optional arg R_NBITS.
Change all callers.
--
In particular for ed25519 and cv25519 it is quite useful to have an
ability to get the required algorithm.
(cherry picked from commit 24095101a5)
* scd/app-common.h (struct app_ctx_s): Add parameter ctrl to function
pointers for readkey, setattr, sign, auth, decipher, and check_pin.
--
This is a yet another patch to allow for easier backporting.
* scd/app-common.h (struct app_ctx_s): Rename unused field
card_version to cardversion.
* scd/app.c (app_new_register): Add code rom 2.3 to detect the Yubikey
and set cardversion.
(app_get_dispserialno): New.
* scd/app-openpgp.c (do_getattr): Use app_get_dispserialno.
* scd/app-common.h (cardtype_t): New.
(apptype_t): New.
(struct app_ctx_s): Change type of field apptype. Add fields
appversion and cardtype. Adjust all app-*.c for the new type.
* scd/app.c (supported_app_list): New.
(strapptype): New.
(apptype_from_name): New.
(app_dump_state): Use strapptype.
(app_write_learn_status): Ditto.
(app_getattr): Ditto.
(check_conflict): Use apptype_from_name and integer comparison.
* scd/app-openpgp.c: Replace app->card_version by app->appversion.
--
This is another patch to make backporting from 2.3 easier.
* scd/app-common.h (APP_WRITEKEY_FLAG_FORCE): New.
(APP_READKEY_FLAG_INFO): New.
(APP_LEARN_FLAG_KEYPAIRINFO): New.
(APP_LEARN_FLAG_MULTI): New.
(struct app_ctx_s): New forward declaration.
(struct app_ctx_s): Add members prep_reselect, reselect, and
with_keygrip.
(KEYGRIP_ACTION_SEND_DATA): New.
(KEYGRIP_ACTION_WRITE_STATUS): New.
(KEYGRIP_ACTION_LOOKUP): New.
(APP_CARD): New macro.
* scd/scdaemon.h: Include app-common.h and remove from all other
files.
(app_t): Move typedef to ...
* scd/app-common.h: here.
--
These changes will make it easier to backport changes from 2.3 to 2.2.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
It does not make sense to keep support form GnuPG 1 here given that we
don't intend to ever backport any of the current stuff to the legacy
version.
Signed-off-by: Werner Koch <wk@gnupg.org>
