* tests/fake-pinentries/README.txt and
tests/fake-pinentries/fake-pinentry.{sh,py,pl,php}}: New public
domain (CC0) files to encourage better test suite practices from
downstream developers.
* tests/fake-pinentries/COPYING (new): a copy of
https://creativecommons.org/publicdomain/zero/1.0/legalcode.txt
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* tests/gpgscm/scheme-private.h (struct scheme): Use (void *) for
alloc_seg.
* tests/gpgscm/scheme.c (alloc_cellseg): Use (void *) for cp. Use
(void *) for coercion of address calculation.
--
In old C language, (char *) means an address. In modern C, it's
specifically an address with alignment=1. It's good to use (void *) for
an address, because newer compiler emits warnings. Note: in this
particular case, it is just a warning and the code is safe against
invalid alignment, though.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/run-tests.scm (test::run-sync): Pass additional
arguments to the test.
(test::run-sync-quiet): Likewise.
(test::run-async): Likewise.
(run-tests-{parallel,sequential}-isolated): Create a tarball of the
gnupghome, then extract it for each test.
* tests/openpgp/setup.scm: Refactor into functions, add an interface
to tar-up the created environment, and untar it multiple times.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/pkglue.c (pk_verify): Fix Ed25519 signatrue values.
* tests/openpgp/verify.scm (msg_ed25519_rshort): New
(msg_ed25519_sshort): New.
("Checking that a valid Ed25519 signature is verified as such"): New.
--
About one out of 256 signature won't verify due to stripped zero
bytes. See the source comment for details.
Reported-by: Andre Heinecke
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oWithTofuInfo): New.
(opts): Add --with-tofu-info.
(main): Set opt.with_tofu_info.
* g10/options.h (struct opt): Add field WITH_TOFU_INFO.
* g10/tofu.c (show_statistics): Add optional arg OUTFP and enter
special mode if not NULL. Change all callers.
(tofu_write_tfs_record): New.
* g10/keylist.c (list_keyblock_colon): Do not print the tofu policy as
part of the "uid" record. Print a new "tfs" record if the new option
is set.
* tests/openpgp/tofu.scm (getpolicy): Change from UID to TFS record.
--
A separate option is required to avoid slowing down key listings.
Foer example the current code takes for a keylisting in tofu+pgp mode
17 seconds while it takes more than 5 minutes if the option is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.
--
Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand. Use symbolic
representations instead of numeric for better readability.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/options.h (struct opt): Remove field tofu_db_format.
* g10/gpg.h (server_control_s): Add fields tofu.batch_update_ref and
tofu.batch_update_started.
* g10/gpg.c (parse_tofu_db_format): Remove.
(main): Make option --tofu-db-format obsolete.
* g10/tofu.c: Major rework. Remove the pretty complicated and slower
split format and with that all the caching. Use the dbs struct
directly. Move global vars for batch update into CTRL. Change
calling conventions of some function to take CTRL or DBS pointers
instead of the former low-level database pointer.
--
The split database format might have been nice for use with Unison but
it bypasses the concept of a relational database by doing parts of
this itself and also risking deadlocks. Working with the Tofu
database for debugging or experiments is also not possible with parts
of the database logic implemented in gpg.
The Tofu support is quite new and we can assume that it is not in real
use now. Thus we better remove that now so that we do not need to
maintain it for all future.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tdbio.c (tdbio_set_dbname): This function explicitly checks for
the file size, but handled the case of a zero-sized file incorrectly
by returning success. Fix this by initializing the database in that
case.
* tests/openpgp/Makefile.am (XTESTS): Add new test.
* tests/openpgp/issue2417.scm: New file.
GnuPG-bug-id: 2417
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/Makefile.am (EXTRA_DIST): Explicitly add setup and
teardown scripts now that they no longer are included in the list of
tests.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/ffi.c (ffi_init): Rename 'mkdtemp'.
* tests/gpgscm/tests.scm (mkdtemp): New function that uses a sensible
location and template if no arguments are given.
(with-temporary-working-directory): Simplify accordingly.
(make-temporary-file): Likewise.
* tests/openpgp/run-tests.scm (run-tests-parallel-isolated): Likewise.
(run-tests-sequential-isolated): Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/Makefile.am (TESTS_ENVIRONMENT): Drop obsolete
variables, add 'srcdir', use absolute paths.
(TESTS): Rename to 'XTESTS' to avoid emitting the automake test
runner. Drop 'setup.scm' and 'finish.scm'.
(xcheck): New target that runs 'run-tests.scm', our Scheme test suite
runner. It will run each test in a clean environment, isolated from
the other tests.
(EXTRA_DIST): Adapt accordingly.
* tests/openpgp/README: Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
Previously, iobuf_peek on a file smaller than 'buflen' would hang.
* common/iobuf.c (underflow): Generalize by adding a target parameter.
(iobuf_peek): Use this to prevent looping here.
* tests/openpgp/Makefile.am (TESTS): Add new test.
* tests/openpgp/setup.scm (dearmor): Move function...
* tests/openpgp/defs.scm (dearmor): ... here.
* tests/openpgp/issue2419.scm: New file.
* tests/openpgp/samplemsgs/issue2419.asc: Likewise.
GnuPG-bug-id: 2419
Signed-off-by: Justus Winter <justus@g10code.com>
'transfer_secret_keys' collects statistics on a subkey-basis, while
the other code does not. This leads to inflated numbers when
importing secret keys. E.g. 'count' is incremented by the main
parsing loop in 'import', and again in 'transfer_secret_keys', leading
to a total of 3 if one key with two secret subkeys is imported.
* g10/import.c (import_secret_one): Adjust to the fact that
'transfer_secret_keys' collects subkey statistics.
* tests/openpgp/Makefile.am (TESTS): Add new test.
* tests/openpgp/issue2346.scm: New file.
* tests/openpgp/samplekeys/issue2346.gpg: Likewise.
GnuPG-bug-id: 2346
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (opexe_0): Include names of missing function
parameters in the error message.
Signed-off-by: Justus Winter <justus@g10code.com>
* agent/command-ssh.c (ssh_identity_register): Add a key to sshcontrol
even if it is already in the private key store.
* tests/openpgp/ssh.scm: Test this.
GnuPG-bug-id: 2316
Signed-off-by: Justus Winter <justus@g10code.com>
CACHE_MODE_ANY is supposed to match any cache mode except
CACHE_MODE_IGNORE, but the code used '==' to compare cache modes.
* agent/cache.c (cache_mode_equal): New function.
(agent_set_cache): Use the new function to compare cache modes.
(agent_get_cache): Likewise.
* tests/openpgp/Makefile.am (TESTS): Add new test.
* tests/openpgp/issue2015.scm: New file.
GnuPG-bug-id: 2015
Signed-off-by: Justus Winter <justus@g10code.com>
We use gpgtar to unpack test data, hence we always build it. If the
user opts out, we simply don't install it.
* configure.ac: Add comment.
* tests/migrations/Makefile.am (required_pgms): Make sure gpgtar is
built.
* tools/Makefile.am: Always build gpgtar, but do not install it if the
user used '--disable-gpgtar'.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/migrations/extended-pkf.scm: Skip test if gpgtar is not built.
* tests/migrations/from-classic.scm: Likewise.
* tests/openpgp/gpgtar.scm: Fix check for gpgtar.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/tests.scm (call-check): Capture stdout and stderr, and
return stdout if the child exited successfully, or include stderr in
the error.
* tests/openpgp/version.scm: Demonstrate this by checking the stdout.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (oRecipientFile, oHiddenRecipientFile): New.
(opts): Add options --recipient-file and --hidden-recipient-file.
(main): Implement them. Also remove duplicate code from similar
options.
* g10/keydb.h (PK_LIST_FROM_FILE): New.
(PK_LIST_SHIFT): Bump up.
* g10/pkclist.c (expand_group): Take care of PK_LIST_FROM_FILE.
(find_and_check_key): Add and implement arg FROM_FILE.
(build_pk_list): Pass new value for new arg.
* g10/getkey.c (get_pubkey_fromfile): New.
* g10/gpgv.c (read_key_from_file): New stub.
* g10/test-stubs.c (read_key_from_file): New stub.
* g10/server.c (cmd_recipient): Add flag --file.
* g10/import.c (read_key_from_file): New.
* tests/openpgp/defs.scm (key-file1): New.
(key-file2): New.
* tests/openpgp/setup.scm: Add their private keys and import the
key-file1.
* tests/openpgp/encrypt.scm: Add new test.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
This fixes problems with long socket names, e.g. when doing distcheck.
* tests/gpgscm/tests.scm (path-join): New function.
(with-temporary-working-directory): Honor 'TMP'.
(make-temporary-file): Likewise.
* tests/migrations/Makefile.am (TMP): Default to '/tmp'.
(TESTS_ENVIRONMENT): Set 'TMP'.
* tests/openpgp/Makefile.am (TMP): Default to '/tmp'.
(TESTS_ENVIRONMENT): Set 'TMP'.
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgtar.c (cmd_and_opt_values): New values.
(opts): New actions.
(parse_arguments): Handle new actions.
* tests/openpgp/gpgtar.scm: Test new interface.
Signed-off-by: Justus Winter <justus@g10code.com>