* common/comopt.c, common/comopt.h: New.
* common/Makefile.am: Add them.
* g10/gpg.c: Include comopt.h.
(main): Also parse common.conf.
* sm/gpgsm.c: Include comopt.h.
(main): Set a flag for the --no-logfile option. Parse common.conf.
* tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add
pseudo option "use_keyboxd".
(known_pseudo_options_gpg): Add pseudo option "use_keyboxd".
(known_options_gpgsm): Remove "use-keyboxd".
* tests/openpgp/defs.scm (create-gpghome): Create common.conf.
* doc/examples/common.conf: New.
--
Note that --use-keybox still works but prints a warning. We will
eventually remove this option becuase it was marked as an experimental
feature anyway.
It would be too confusing if gpg and gpgsm use different key storages.
Further, other components (e.g. dirmngr or gpg-wks-client) which call
gpg or gpgsm need to be aware that the keyboxd is used and pass that
option on the command line. Now that common.conf is always read (even
if --no-options is used) those tools will work instantly.
* g10/gpg.c: New option --allow-old-cipher-algos.
(set_compliance_option): Set --rfc4880bis explictly to SHA256 and
AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440.
* g10/options.h (opt): Add flags.allow_old_cipher_algos.
* g10/misc.c (print_sha1_keysig_rejected_note): Always print the note
unless in --quiet mode.
* g10/encrypt.c (setup_symkey): Disallow by default algos with a
blocklengt < 128.
(encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES.
* g10/pkclist.c (algo_available): Take care of old cipher also.
(select_algo_from_prefs): Use AES as implicit algorithm by default.
* tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos.
--
GnuPG-bug-id: 3415
* tests/openpgp/all-tests.scm (all-tests): Replace extended-key-format
mode with a new keyboxd mode.
* tests/openpgp/defs.scm (create-gpghome): Ditto.
* tests/openpgp/gpgv.scm: Adjust for keyboxd mode.
* tests/openpgp/issue2419.scm: Fix to allow setting a log-file into
gpg.conf for debugging.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/defs.scm (pipe:gpg): Remove stray dash.
--
The extra dash is problematic at export and import because this does
not export a single key as intended by the tests but does two key
lookups where the second fails because that userid is always "-". For
the current keyring and keybox code this does not matter because it is
ignored. The keyboxd code however is more picky and returns an error.
Fixes-commit: 9609cb20e4
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Take care: Running under valgrind takes loooong and in some case you
may run into an valgrind internal error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/defs.scm: Add "disable-scdaemon". Remove
"scdaemon-program".
* tests/gpgme/gpgme-defs.scm, tests/gpgsm/gpgsm-defs.scm: Likewise.
* tests/inittests, tests/pkits/inittests: Add "disable-scdaemon"
--
Before this change, running "make check" accesses USB device by
scdaemon on host computer. If there is any smartcard/token available,
it may affect test results. Because default key choice depends on
smartcard/token availability now and existing tests have nothing about
testing smartcard/token, disabling scdaemon is good.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (proc_encrypted): Require an MDC or AEAD
* tests/openpgp/defs.scm (create-gpghome): Use --ignore-mdc-error to
allow testing with the current files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/gnupg.scm (with-ephemeral-home-directory): Add
teadown-fn.
* tests/gpgsm/export.scm: Use -no-atexit version and stop-agent.
* tests/openpgp/decrypt-session-key.scm: Likewise.
* tests/openpgp/decrypt-unwrap-verify.scm: Likewise.
* tests/openpgp/defs.scm (have-opt-always-trust): Likewise.
(setup-environment-no-atexit): New.
(start-agent): Support no use of atexit.
* tests/gpgsm/gpgsm-defs.scm (setup-gpgsm-environment-no-atexit): New.
* tests/migrations/common.scm (untar-armored): Follow the change
of with-ephemeral-home-directory.
--
When gpg-agent detects homedir removal, it will automatically exit.
Then, call of 'gpgconf --kill all' will fail. So, stop-agent should
be called before the removal of homedir.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/defs.scm (create-gpghome): Add s2k-count.
--
My tests show only 2.5% improvement, but as we have that option now
let's use it.
real 9m12.604s
user 2m20.720s
sys 0m11.452s
real 8m3.815s
user 2m16.700s
sys 0m11.544s
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_scd): Support !BUILD_WITH_SCDAEMON.
* tests/openpgp/defs.scm (create-gpghome): Likewise.
* tests/gpgsm/gpgsm-defs.scm (create-gpgsmhome): Likewise.
--
We could modify gpg-agent to remove all support of scdaemon, with no
inclusion of call-scd.c, divert-scd.c, and learncard.c, but it would
not be worth to do that.
GnuPG-bug-id: 3316
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_scd): Support !BUILD_WITH_SCDAEMON.
* tests/openpgp/defs.scm (create-gpghome): Likewise.
* tests/gpgsm/gpgsm-defs.scm (create-gpgsmhome): Likewise.
--
We could modify gpg-agent to remove all support of scdaemon, with no
inclusion of call-scd.c, divert-scd.c, and learncard.c, but it would
not be worth to do that.
GnuPG-bug-id: 3316
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/tofu.scm (gettrust): Moved to the common defs.scm
module.
(checktrust): Likewise.
* tests/openpgp/defs.scm (gettrust): New function.
(checktrust): Likewise.
--
These functions will be re-used by the tests for the PGP trust
model.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* tests/openpgp/defs.scm (create-file): Unlink file first.
* tests/openpgp/shell.scm: Ask whether to import legacy test keys or
not, and whether to drop 'batch' from the configuration. Add paths to
all the programs to 'PATH'.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/all-tests.scm: Generalize a bit, and also add a
variant that uses the new extended key format.
* tests/openpgp/defs.scm (create-gpghome): Conditionally enable the
new extended key format.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (start-agent,stop-agent): Use gpg-conf which
will properly use the '--build-prefix' argument to make gpgconf use
tools from the build directory.
GnuPG-bug-id: 3165
Fixes-commit: 2c9d9ac55e
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgme/gpgme-defs.scm: Use the scdaemon from the build tree
when writing a 'gpg-agent.conf'.
* tests/gpgsm/gpgsm-defs.scm: Likewise.
* tests/openpgp/defs.scm: Likewise.
--
As of 97a2394eca gpg may query the
scdaemon for a signing key to use. To make sure that the agent calls
the right scdaemon, we provide the path explicitly in the
'gpg-agent.conf' that is used in the tests, similar to what we do for
the agent itself and the pinentry.
GnuPG-bug-id: 3165
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/all-tests.scm: Run each test twice, once with public
keys stored in a keybox, once with a keyring.
* tests/openpgp/defs.scm (create-gpghome): Create a public keyring to
make GnuPG use that instead of creating a keybox if '--use-keyring' is
given.
* tests/openpgp/setup.scm: Fix flag handling and usage.
--
This parametrizes the OpenPGP tests. With this change, the test suite
is able to detect problems with the keyring store, e.g. like the one
fixed in 22739433e9.
GnuPG-bug-id: 3080
Signed-off-by: Justus Winter <justus@g10code.com>
--
Locate every resource and every script used in the tests using a path
relative to the top of the source tree.
This is a purely mechanical change, mostly done using regular
expressions, with a few manual fixups here and there.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (have-opt-always-trust): Execute in empty
ephemeral home directory. This prevents gpg from picking up the
configuration from the current gnupghome (if any).
* tests/migrations/common.scm (untar-armored): Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (with-home-directory,
with-ephemeral-home-directory): Move...
* tests/gpgscm/gnupg.scm: ... to this new file.
* tests/gpgscm/main.c (main): Load the new file.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/4gb-packet.scm: Skip if we do not have BZIP2.
* tests/openpgp/defs.scm (have-compression-algo?): New function.
GnuPG-bug-id: 3028
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (with-ephemeral-home-directory): Set
GNUPGHOME and cwd to the ephemeral directory before calling the setup
function.
GnuPG-bug-id: 3047
Fixes-commit: 32b75fb774
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (with-ephemeral-home-directory): Create
configuration files when we enter the context.
* tests/openpgp/setup.scm: Do not use an ephemeral home directory.
Tests should always use the cwd.
* tests/gpgsm/setup.scm: Likewise.
* tests/gpgsm/export.scm: Add explicit constructor function.
* tests/openpgp/decrypt-session-key.scm: Likewise.
* tests/openpgp/decrypt-unwrap-verify.scm: Likewise.
--
Previously, ephemeral homedirectories lacked a configuration, hence
GnuPG tried to start backend daemons using their installed locations.
Fix this by explicitly creating a suitable configuration.
GnuPG-bug-id: 3047
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (stop-agent): Swap order of actions. Kill
all daemons using gpgconf.
* tools/gpgconf.c (main) <aRemoveSocketDir>: Try to remove known
socketfails on rmdir failure. Do no fail for ENONET.
--
Killing all daemons is not really required but it does not harm to be
prepared for the future.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/tests.scm (mkdtemp): Create temporary directories in
'/tmp' on UNIX, or in '%Temp' on Windows.
* tests/migrations/common.scm (run-test): Turn error into a warning.
* tests/openpgp/defs.scm (start-agent): Likewise.
--
This fixes the problem of GnuPG components being unable to communicate
because of too long GnuPG home directories in important build
environments like the Debian build servers despite the use of socket
directories.
This reverts d75d20909d.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/migrations/common.scm (run-test): Turn warning into an error.
* tests/openpgp/defs.scm (start-agent): Likewise.
--
We use separate directories to create the sockets in so that the
absolute path to the every socket fits into sun_path.
Fixes-commit: 7e19786a5d
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (gpg-conf'): Explicitly pass the build prefix
to gpgconf here...
(gpg-components): ... instead of only here.
--
Previously, gpgconf was not invoked with '--build-prefix' when
changing the configuration. This made tests using this facility fail
(e.g. the TOFU test). This only affected release builds, because in
development builds gpgconf picks up the build prefix from the
environment.
GnuPG-bug-id: 2979
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/tests.scm (mkdtemp): Do not magically obey the
environment variable 'TMP', make sure to always return an absolute
path.
* tests/gpgme/Makefile.am (TMP): Drop variable.
(TESTS_ENVIRONMENT): Drop 'TMP'.
* tests/gpgme/gpgme-defs.scm (create-gpgmehome): Start the agent. Do
not create private key store, the agent does that for us.
* tests/gpgsm/Makefile.am (TMP): Drop variable.
(TESTS_ENVIRONMENT): Drop 'TMP'.
* tests/gpgme/gpgme-defs.scm (create-gpgsmhome): Start the agent. Do
not create private key store, the agent does that for us.
* tests/migrations/Makefile.am (TMP): Drop variable.
(TESTS_ENVIRONMENT): Drop 'TMP'.
* tests/migrations/common.scm (gpgconf): New variable.
(run-test): Create and remove socket directory.
* tests/migrations/extended-pkf.scm (src-tarball): Remove variable.
(setup): Remove function.
(trigger-migration): Likewise.
Use 'run-test' to execute the test.
* tests/migrations/from-classic.scm (src-tarball): Remove variable.
(setup): Remove function.
Use 'run-test' to execute the tests.
* tests/openpgp/Makefile.am (TMP): Drop variable.
(TESTS_ENVIRONMENT): Drop 'TMP'.
* tests/openpgp/README: Do not mention 'TMP'.
* tests/openpgp/defs.scm (with-home-directory): New macro.
(create-legacy-gpghome): Do not create private key store, the agent
does that for us.
(start-agent): Make sure to terminate the right agent with 'atexit'.
--
Previously, the test suite relied upon creating home directories in
'/tmp'. This has been problematic in some build environments,
although POSIX mandates that '/tmp' must be available.
We now rely on 'gpgconf --create-socketdir' to create a suitable
socket directory for us. This allows us to get rid of some cruft. It
also aligns the environment the tests are run in closer with the
environment that we intend that GnuPG runs in.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm: Improve high-level inteface to gpgconf.
* tests/openpgp/gpgconf.scm: Adapt.
* tests/openpgp/tofu.scm: Use it to select the trust model.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/Makefile.am (XTESTS): Add new test.
* tests/openpgp/defs.scm (percent-encode): New function.
(gpg-conf): Generalize so that we can feed stdin.
(gpg-config): New function.
* tests/openpgp/gpgconf.scm: New file.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (with-ephemeral-home-directory): Make
hygienic, use define-macro, do not change to the ephemeral home
directory.
* tests/gpgsm/setup.scm: Change to the ephemeral home directory.
* tests/openpgp/setup.scm: Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (percent-decode): New function.
(bin-prefix): New variable.
(installed?): Likewise.
(tool-hardcoded): Use the new variables.
(gpg-conf): Use the new function to decode the values.
(gpg-components): Do not use '--build-prefix' when 'installed?'.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/Makefile.am (TEST_FILES): Add new file.
* tests/openpgp/defs.scm (plain-files): Add 'plain-large'.
(all-files): New variable.
(create-sample-files): New function.
(create-legacy-gpghome): Use new function.
* tests/openpgp/plain-large.asc: New file.
Signed-off-by: Justus Winter <justus@g10code.com>
* common/homedir.c (gnupg_build_directory): New variable.
(gnupg_module_name_called): Likewise.
(gnupg_set_builddir): New function.
(gnupg_set_builddir_from_env): Likewise.
(gnupg_module_name): Support locating components in the build tree.
* common/util.h (gnupg_set_builddir): New prototype.
* tests/openpgp/defs.scm (tools): Drop 'gpg and 'gpg-agent.
(tool): Rename to 'tool-hardcoded.
(gpg-conf): New function, with accessors for the results.
(gpg-components): New variable.
(tool): New function.
* tools/gpgconf.c (enum cmd_and_opt_values): New key.
(opts): New option '--build-prefix'.
(main): Handle new option.
--
This change makes sure that the components from the build tree are
used, and not some older installed version in PATH. It also lets us
make GPGME use components from the build tree, making it possible to
execute GPGME's test suite with them.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (gpg-has-option?): New function.
(have-opt-always-trust): Use a simpler test for that option. This way
that is less distracting when we run the tests with verbose=3.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (setup-legacy-environment): Do not call
'setup-environment' because that will start the agent, and hence
register the atexit function twice.
Fixes: a55393cb5f
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/tests.scm (log): New function.
* tests/openpgp/run-tests.scm (run-tests-parallel): Do not run the
startup and teardown scripts.
(run-tests-sequential): Likewise.
* tests/openpgp/setup.scm: Move all functions...
* tests/openpgp/defs.scm: ... here and make them less verbose.
(setup-environment): New function.
(setup-legacy-environment): Likewise.
(start-agent): Make less verbose, run 'stop-agent' at interpreter
exit.
(stop-agent): Make less verbose.
* tests/openpgp/finish.scm: Drop file.
* tests/openpgp/Makefile.am (EXTRA_DIST): Drop removed file.
* tests/openpgp/4gb-packet.scm: Use 'setup-environment' or
'setup-legacy-environment' as appropriate.
* tests/openpgp/armdetach.scm: Likewise.
* tests/openpgp/armdetachm.scm: Likewise.
* tests/openpgp/armencrypt.scm: Likewise.
* tests/openpgp/armencryptp.scm: Likewise.
* tests/openpgp/armor.scm: Likewise.
* tests/openpgp/armsignencrypt.scm: Likewise.
* tests/openpgp/armsigs.scm: Likewise.
* tests/openpgp/clearsig.scm: Likewise.
* tests/openpgp/conventional-mdc.scm: Likewise.
* tests/openpgp/conventional.scm: Likewise.
* tests/openpgp/decrypt-dsa.scm: Likewise.
* tests/openpgp/decrypt.scm: Likewise.
* tests/openpgp/default-key.scm: Likewise.
* tests/openpgp/detach.scm: Likewise.
* tests/openpgp/detachm.scm: Likewise.
* tests/openpgp/ecc.scm: Likewise.
* tests/openpgp/encrypt-dsa.scm: Likewise.
* tests/openpgp/encrypt.scm: Likewise.
* tests/openpgp/encryptp.scm: Likewise.
* tests/openpgp/export.scm: Likewise.
* tests/openpgp/finish.scm: Likewise.
* tests/openpgp/genkey1024.scm: Likewise.
* tests/openpgp/gpgtar.scm: Likewise.
* tests/openpgp/gpgv-forged-keyring.scm: Likewise.
* tests/openpgp/import.scm: Likewise.
* tests/openpgp/issue2015.scm: Likewise.
* tests/openpgp/issue2417.scm: Likewise.
* tests/openpgp/issue2419.scm: Likewise.
* tests/openpgp/key-selection.scm: Likewise.
* tests/openpgp/mds.scm: Likewise.
* tests/openpgp/multisig.scm: Likewise.
* tests/openpgp/quick-key-manipulation.scm: Likewise.
* tests/openpgp/seat.scm: Likewise.
* tests/openpgp/shell.scm: Likewise.
* tests/openpgp/signencrypt-dsa.scm: Likewise.
* tests/openpgp/signencrypt.scm: Likewise.
* tests/openpgp/sigs-dsa.scm: Likewise.
* tests/openpgp/sigs.scm: Likewise.
* tests/openpgp/ssh.scm: Likewise.
* tests/openpgp/tofu.scm: Likewise.
* tests/openpgp/use-exact-key.scm: Likewise.
* tests/openpgp/verify.scm: Likewise.
* tests/openpgp/version.scm: Likewise.
* tests/openpgp/issue2346.scm: Likewise and simplify.
--
The previous Bourne Shell-based test suite created the environment
before running all tests, and tore it down after executing them. When
we created the Scheme-based test suite, we kept this design at first,
but introduced a way to run each test in its own environment to
prevent tests from interfering with each other. Nevertheless, every
test started out with the same environment.
Move the creation of the test environment into each test. This gives
us finer control over the environment each test is run in. It also
makes it possible to run each test by simply executing it using gpgscm
without the use of the runner. Furthermore, it has the neat
side-effect of speeding up the test suite if run in parallel.
Signed-off-by: Justus Winter <justus@g10code.com>
