* tests/tpm2dtests/start_sw_tpm.sh: New.
* tests/tpm2dtests/Makefile.am: Add.
--
This accidentally got left out of the initial commit for testing
6720f1343 ("tpm2d: add tests for the tpm2daemon")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Added to Makefile and wrote tiny ChangeLog.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Detect TPM emulator and enable tests.
* tests/tpm2dtests/: New test suite.
* tests/Makefile.am: Run tests.
--
Add a set of tests that exercise tpm2daemon handling of keys and
verify compatibility with non-tpm based keys.
Running this test infrastructure requires a tpm emulator, which is
tested for during configuration. If an emulator is not found, the
tests won't be run since they require the presence of a TPM (although
the TPM handling code will still be built).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
- Fixed tests/Makefile.am for make distcheck.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: New option --allow-old-cipher-algos.
(set_compliance_option): Set --rfc4880bis explictly to SHA256 and
AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440.
* g10/options.h (opt): Add flags.allow_old_cipher_algos.
* g10/misc.c (print_sha1_keysig_rejected_note): Always print the note
unless in --quiet mode.
* g10/encrypt.c (setup_symkey): Disallow by default algos with a
blocklengt < 128.
(encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES.
* g10/pkclist.c (algo_available): Take care of old cipher also.
(select_algo_from_prefs): Use AES as implicit algorithm by default.
* tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos.
--
GnuPG-bug-id: 3415
* tests/openpgp/all-tests.scm (all-tests): Replace extended-key-format
mode with a new keyboxd mode.
* tests/openpgp/defs.scm (create-gpghome): Ditto.
* tests/openpgp/gpgv.scm: Adjust for keyboxd mode.
* tests/openpgp/issue2419.scm: Fix to allow setting a log-file into
gpg.conf for debugging.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/defs.scm (pipe:gpg): Remove stray dash.
--
The extra dash is problematic at export and import because this does
not export a single key as intended by the tests but does two key
lookups where the second fails because that userid is always "-". For
the current keyring and keybox code this does not matter because it is
ignored. The keyboxd code however is more picky and returns an error.
Fixes-commit: 9609cb20e4caee739b9fc4fd36797029d2970041
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Take care: Running under valgrind takes loooong and in some case you
may run into an valgrind internal error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/main.c: Switch to the new option parser.
* common/argparse.c, common/argparse.h: Remove.
* common/init.c (_init_common_subsystems): Do not call obsolete func.
* common/Makefile.am (common_sources): Remove those files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/keydb.h (struct kbnode_struct): Replace unused field RECNO by
new field TAG.
* g10/kbnode.c (alloc_node): Change accordingly.
* g10/import.c (import_one): Add arg r_valid.
(sec_to_pub_keyblock): Set tags.
(resync_sec_with_pub_keyblock): New.
(import_secret_one): Change return code to gpg_error_t. Return an
error code if sec_to_pub_keyblock failed. Resync secret keyblock.
--
When importing an invalid secret key ring for example without key
binding signatures or no UIDs, gpg used to let gpg-agent store the
secret keys anyway. This is clearly a bug because the diagnostics
before claimed that for example the subkeys have been skipped.
Importing the secret key parameters then anyway is surprising in
particular because a gpg -k does not show the key. After importing
the public key the secret keys suddenly showed up.
This changes the behaviour of
GnuPG-bug-id: 4392
to me more consistent but is not a solution to the actual bug.
Caution: The ecc.scm test now fails because two of the sample keys
don't have binding signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* gpgscm/scheme.c (gc_reservation_failure): Fix adding ";".
[!NDEBUG] (scheme_init_custom_alloc): Don't init seserved_lineno.
--
Picked from libgpg-error commit of:
8a9397896fd202dcfb3fb46259e43bc05a0ddd2e
In some build environment, NDEBUG is defined (although it's
bad practice). This change supports such a situation.
GnuPG-bug-id: 3959
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/defs.scm: Add "disable-scdaemon". Remove
"scdaemon-program".
* tests/gpgme/gpgme-defs.scm, tests/gpgsm/gpgsm-defs.scm: Likewise.
* tests/inittests, tests/pkits/inittests: Add "disable-scdaemon"
--
Before this change, running "make check" accesses USB device by
scdaemon on host computer. If there is any smartcard/token available,
it may affect test results. Because default key choice depends on
smartcard/token availability now and existing tests have nothing about
testing smartcard/token, disabling scdaemon is good.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/gpgscm/scheme.c (CASE): Use unused attribute for GCC > 6.
(FALLTHROUGH): New for fallthrough.
(Eval_Cycle): Use FALLTHROUGH. Remove not-needed comment of
fallthrough.
--
Since GCC combines C preprocessor macro expansion, the fallthrough
comment doesn't work well to suppress warnings for
-Wimplicit-fallthrough, near the macro CASE. To handle this
problem, we use GCC's extension of unused label and fallthrough
attributes.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (oAllowMultisigVerification)
(oAllowMultipleMessages, oNoAllowMultipleMessages): Remove.
(opts): Turn --allow-multisig-verification, --allow-multiple-messages
and --no-allow-multiple-messages into NOPs
* g10/options.h (struct opt): Remove flags.allow_multiple_messages.
* g10/mainproc.c (proc_plaintext): Assume allow_multiple_messages is
false.
--
These options are very old compatibility hacks and should not be used
anymore. We keep them as dummy options in case someone has them in
the conf file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Require an MDC or AEAD
* tests/openpgp/defs.scm (create-gpghome): Use --ignore-mdc-error to
allow testing with the current files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/gnupg.scm (with-ephemeral-home-directory): Add
teadown-fn.
* tests/gpgsm/export.scm: Use -no-atexit version and stop-agent.
* tests/openpgp/decrypt-session-key.scm: Likewise.
* tests/openpgp/decrypt-unwrap-verify.scm: Likewise.
* tests/openpgp/defs.scm (have-opt-always-trust): Likewise.
(setup-environment-no-atexit): New.
(start-agent): Support no use of atexit.
* tests/gpgsm/gpgsm-defs.scm (setup-gpgsm-environment-no-atexit): New.
* tests/migrations/common.scm (untar-armored): Follow the change
of with-ephemeral-home-directory.
--
When gpg-agent detects homedir removal, it will automatically exit.
Then, call of 'gpgconf --kill all' will fail. So, stop-agent should
be called before the removal of homedir.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (opts): Add new option.
(opt_set_iobuf_size): New var.
(set_debug): Set the option.
* tests/openpgp/armor.scm: Use this option to revert the buffer size
to the one which used to exhibit the tested bugs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/Makefile.am [DISABLE_REGEX] (EXTRA_DIST, XTESTS):
Conditionalize.
* tests/openpgp/all-tests.scm (all-tests): Input file is Makefile.
--
The feature is only valid with !DISABLE_REGEX.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/Makefile.am (XTESTS): Add trust-pgp-4.scm.
(EXTRA_DIST): Remove the test file from EXTRA_DIST.
--
Now that issue 2923 is fixed, the trust-pgp-4 test passes as
expected and we can enable it again. That should help prevent
a future regression on this issue.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* tests/openpgp/defs.scm (create-gpghome): Add s2k-count.
--
My tests show only 2.5% improvement, but as we have that option now
let's use it.
real 9m12.604s
user 2m20.720s
sys 0m11.452s
real 8m3.815s
user 2m16.700s
sys 0m11.544s
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_scd): Support !BUILD_WITH_SCDAEMON.
* tests/openpgp/defs.scm (create-gpghome): Likewise.
* tests/gpgsm/gpgsm-defs.scm (create-gpgsmhome): Likewise.
--
We could modify gpg-agent to remove all support of scdaemon, with no
inclusion of call-scd.c, divert-scd.c, and learncard.c, but it would
not be worth to do that.
GnuPG-bug-id: 3316
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_scd): Support !BUILD_WITH_SCDAEMON.
* tests/openpgp/defs.scm (create-gpghome): Likewise.
* tests/gpgsm/gpgsm-defs.scm (create-gpgsmhome): Likewise.
--
We could modify gpg-agent to remove all support of scdaemon, with no
inclusion of call-scd.c, divert-scd.c, and learncard.c, but it would
not be worth to do that.
GnuPG-bug-id: 3316
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/quick-key-manipulation.scm: Fix expiration time
comparison.
--
This is a bug fix for Amelia Earhart who is probably in UTC-12.
When expiration date is specified, GnuPG interprets it as noon of the
date in local time.
Before this fix, the test compared the value by 2145916800 which is
2038-01-01 00:00:00 in UTC with allowance of 1 day. When the test
was ran in UTC-12 timezone, it failed because of noon in the timezone
is midnight of the next day in UTC.
GnuPG-bug-id: 3393
Reported-by: Daniel Kahn Gillmor
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/quick-key-manipulation.scm: Fix expiration time
comparison.
--
This is a bug fix for Amelia Earhart who is probably in UTC-12.
When expiration date is specified, GnuPG interprets it as noon of the
date in local time.
Before this fix, the test compared the value by 2145916800 which is
2038-01-01 00:00:00 in UTC with allowance of 1 day. When the test
was ran in UTC-12 timezone, it failed because of noon in the timezone
is midnight of the next day in UTC.
GnuPG-bug-id: 3393
Reported-by: Daniel Kahn Gillmor
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/Makefile.am (XTESTS): Remove test.
(EXTRA_DIST): Add test file.
--
There are two problems with this test: First a syntax error in the
file name so that the test was not used at all. Second the test
currently returns FAIL.
Fixes-commit: c23a69970ba38edae9d3b2603825d18fbb732423
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/trust-pgp-1.scm: New file.
* tests/openpgp/trust-pgp-2.scm: New file.
* tests/openpgp/trust-pgp-3.scm: New file.
* tests/openpgp/trust-pgp-4.scm: New file.
* tests/openpgp/trust-pgp/common.scm: New file.
* tests/openpgp/trust-pgp/scenario1.asc: New file.
* tests/openpgp/trust-pgp/scenario2.asc: New file.
* tests/openpgp/trust-pgp/scenario3.asc: New file.
* tests/openpgp/trust-pgp/scenario4.asc: New file.
* tests/openpgp/trust-pgp/alice.sec.asc: New file.
* tests/openpgp/trust-pgp/bobby.sec.asc: New file.
* tests/openpgp/trust-pgp/carol.sec.asc: New file.
* tests/openpgp/trust-pgp/david.sec.asc: New file.
* tests/openpgp/trust-pgp/frank.sec.asc: New file.
* tests/openpgp/trust-pgp/grace.sec.asc: New file.
* tests/openpgp/trust-pgp/heidi.sec.asc: New file.
* tests/openpgp/Makefile.am (XTESTS): Add new tests.
(TEST_FILES): Add new files.
(EXTRA_DIST): Add new common file.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* tests/openpgp/tofu.scm (gettrust): Moved to the common defs.scm
module.
(checktrust): Likewise.
* tests/openpgp/defs.scm (gettrust): New function.
(checktrust): Likewise.
--
These functions will be re-used by the tests for the PGP trust
model.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* tests/gpgscm/scheme.c (CASE): Rearrange so that the case statement
is at the front.
(Eval_Cycle): Improve fallthrough annotations.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/README: Add quickstart instructions, how to use
shell.scm, remove no longer used MKDATA.
Signed-off-by: Justus Winter <justus@g10code.com>
* configure.ac: New option --enable-all-tests.
* tests/gpgscm/ffi.c (ffi_init): New gloabl var *run-all-tests*.
* tests/openpgp/all-tests.scm (all-tests): Use that var instead
of *maintainer-mode*.
* Makefile.am (AM_DISTCHECK_CONFIGURE_FLAGS): Add --enable-all-tests.
--
It is better to have a separate option to run all tests than to put
this on top of --enable-maintainer-mode. This way we can also make
sure to run all tests during "make distcheck".
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/tests.scm (test-pool): Add delimiter lines.
--
This is to make those summaries a bit more simlar to those from
automake.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Leak the maintainer mode flag into 'config.h'.
* tests/gpgscm/ffi.c: Pass it into the scheme environment.
* tests/openpgp/all-tests.scm: Only run tests against non-default
configurations (keyring, extended-key-format) in maintainer mode.
--
Werner is concerned that the tests do take up too much time and asked
me to reduce the runtime of the tests for normal users.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (create-file): Unlink file first.
* tests/openpgp/shell.scm: Ask whether to import legacy test keys or
not, and whether to drop 'batch' from the configuration. Add paths to
all the programs to 'PATH'.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/repl.scm (prompt-yes-no?): New function.
* tests/gpgscm/tests.scm (pathsep-split): Likewise.
(pathsep-join): Likewise.
(with-path): Use the new function.
Signed-off-by: Justus Winter <justus@g10code.com>
