* dirmngr/dirmngr.c (http_session_new): If the user isn't talking to
the HKPS pool, and they have not specified any hkp-cacert, then we
should default to the system CAs, rather than nothing.
* doc/dirmngr.texi: Document choice of CAs.
--
Consider three possible classes of dirmngr configuration:
a) no hkps:// keyserver URLs at all (communication with keyservers is
entirely in the clear)
b) hkps:// keyserver URLs, but no hkp-cacert directives
c) hkps:// keyserver URLs, and at least one hkp-cacert directive
class (a) provides no confidentiality of requests.
class (b) currently will never work because the server certificate
cannot be validated.
class (c) is currently supported as intended.
This patch allows users with configurations in class (b) to work as
most users expect (relying on the system certificate authorities),
without affecting users in classes (a) or (c).
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
o minor indentation fix
- wk
* dirmngr/dirmngr.h (struct opt): Add field allow_version_check.
* dirmngr/dirmngr.c (oAllowVersionCheck): New.
(opts): Add --allow-version-check.
(network_activity_seen): New variable.
(parse_rereadable_options): Set opt.allow_version_check.
(main) <aGPGConfList>: Do not anymore set the no change flag for
Windows. Add allow-version-check.
(netactivity_action): Set network_activity_seen.
(housekeeping_thread): Call dirmngr_load_swdb.
* tools/gpgconf-comp.c (gc_options_dirmngr): Add allow-version-check.
Make "use-tor" available at Basic level.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/loadswdb.c (time_of_saved_swdb): Aslo return the "verified"
timestamp.
(dirmngr_load_swdb): Avoid unnecessary disk or network access witout
FORCE. Do not update swdb.lst if it did not change.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oOverrideSessionKeyFD): New.
(opts): Add option --override-session-key-fd.
(main): Handle that option.
(read_sessionkey_from_fd): New.
--
The override-session-key feature was designed to mitigate the effect
of the British RIP act by allowing to keep the private key private and
hand out only a session key. For that use case the leaking of the
session key would not be a problem. However there are other use
cases, for example fast re-decryption after an initial decryption,
which would benefit from concealing the session key from other users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpgv.c (oEnableSpecialFilenames): New.
(opts): Add option --enable-special-filenames.
(main): Implement that option.
--
This is the same option we have in gpg. It allows to use commands
like
gpgv --enable-special-filenames -- '-&3' - <msg 3<msg.sig
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oCompliance): New.
(opts): Add "--compliance".
(parse_tofu_policy): Use a generic description string for "help".
(parse_compliance_option): New.
(main): Add option oCompliance. Factor out code for compliance
setting to ...
(set_compliance_option): new.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
These configuration files and instructions enable clean and simple
daemon supervision on machines that run systemd.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
- Removed the detailed ChangeLog entry because that is not needed for
doc changes.
- Added an entry to doc/examples/README.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
With commit d83ba4897b all system daemon
features have been removed and thus this should be reflected in the
man page.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (query_swdb): Insert new field with the installed
version. Check that the supplied version does not contain a colon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (aQuerySWDB): New.
(opts): Add --query-swdb.
(valid_swdb_name_p): New.
(query_swdb): New.
(main): Implement command --query-swdb.
--
Right now this command is not very useful because dimngr has not yet
been changed to create the swdb.lst. For manual tests the swdb.lst
file from the Net can be used with these additional lines:
.filedate 20161102T130337
.verified 20161102T150000
There were several different variant spellings of "passphrase". This
should fix them all for all English text.
I did notice that po/it.po contains multiple instances of
"passhprase", which also looks suspect to me, but i do not know
Italian, so i did not try to correct it.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* dirmngr/dirmngr.c (main): Add new --supervised command, which is a
mode designed for running under a process supervision system like
systemd or runit.
* doc/dirmngr.texi: document --supervised option.
--
"dirmngr --supervised" is a way to invoke dirmngr such that a system
supervisor like systemd can provide socket-activated startup, log
management, and scheduled shutdown.
When running in this mode, dirmngr:
* Does not open its own listening socket; rather, it expects to be
given a listening socket on file descriptor 3.
* Does not detach from the invoking process, staying in the
foreground instead.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* doc/gpg-agent.texi: document "gpgconf --kill gpg-agent" for manual
agent termination.
This was requested in a side-comment in https://bugs.debian.org/840669
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/options.h (DBG_MPI): New.
* g10/gpg.c (set_debug): Use macro or extra parens for binary operator.
* g10/parse-packet.c (set_packet_list_mode): Use dbg macro.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (get_socket_path): Rename to ...
(get_socket_name): this. This is to comply with the GNU coding guide.
Use xtrymalloc instead of malloc. Do not build for W32.
(map_supervised_sockets): Use strtokenize and set the the socket names
here.
(main): Adjust for above change. Do not close the socket.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (get_socket_path): New function for POSIX systems
to return the path for a provided unix-domain socket.
(map_supervised_sockets): New function to inspect $LISTEN_FDS and
$LISTEN_FDNAMES and map them to the specific functionality offered by
the agent.
(main): Add --supervised command. When used, listen on already-open
file descriptors instead of opening our own.
* doc/gpg-agent.texi: Document --supervised option.
--
"gpg-agent --supervised" is a way to invoke gpg-agent such that a
system supervisor like systemd can provide socket-activated startup,
log management, and scheduled shutdown.
When running in this mode, gpg-agent:
* Does not open its own listening socket; rather, it expects to be
given a listening socket on incoming file descriptors.
* Does not detach from the invoking process, staying in the
foreground instead. Unless otherwise specified, logs are sent to
stderr.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/gpg-agent.c (main): Provide defaults for 'extra-socket' and
'browser-socket', enable ssh socket by default, but do not emit the
'SSH_AUTH_SOCK' variable unless it has been explicitly requested.
* configure.ac (GPG_AGENT_{EXTRA,BROWSER}_SOCK_NAME): New definitions.
* doc/gpg-agent.texi: Update documentation.
--
This change enables the restricted, browser, and ssh socket by
default. Note that in all cases, the user has to do some additional
configuration to her setup to make use of these features. Therefore,
this should not break any existing setups, but makes it simpler to
discover and use these features.
Signed-off-by: Justus Winter <justus@g10code.com>
--
The commands --help, --version, --dump-options are special in that
they can't be abbreciated on the command line. This is to avoid
problems with regular options with the same prefix.
Fixes-commit: 0a27d8a57c4c990fcada4278a1ce2e6fc9043e9
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmgnr/cdblib.c: comment used unnecesary hyphenation
* dirmngr/crlcache.h: comment was iso-8859-1
* doc/contrib.text: list contributors using UTF-8 (now we can
acknowledge many more people using their preferred orthography)
At least one other files remains in a non-UTF-8 encoding, which i'm
not sure what to do with:
- build-aux/speedo/w32/inst.nsi is ISO-8859-1, but maybe Windows needs
it that way?
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/keygen.c (FUTURE_STD_): New constants.
(parse_expire_string): Handle special keywords.
(parse_algo_usage_expire): Allow "future-default". Simplify call to
parse_expire_string.
(quick_generate_keypair): Always allow an expiration date. Replace
former "test-default" by "future-default".
--
Using an expiration date is pretty common, thus we now allow the
creation of a standard key with expiration date.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c [HAVE_INOTIFY_INIT]: Include sys/inotify.h.
(oDisableCheckOwnSocket): New.
(opts): Add --disable-check-own-socket.
(disable_check_own_socket): New var.
(parse_rereadable_options): Set that var.
(my_inotify_is_name) [HAVE_INOTIFY_INIT]: New.
(handle_connections) [HAVE_INOTIFY_INIT]: New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c: Include "sqrtu32.h".
(struct tofu_dbs_s.s): Rename get_trust_gather_other_keys to
get_trust_gather_signature_stats. Add new field
get_trust_gather_encryption_stats.
(initdb): Create the encryptions table.
(ask_about_binding): Show the encryption statistics too.
(tofu_register): Rename from this...
(tofu_register_signature): ... to this and update callers.
(tofu_register_encryption): New function.
(write_stats_status): Add parameters encryption_count,
encryption_first_done and encryption_most_recent. Update callers.
Compute the trust using the euclidean distance of the signature and
signature count. Compare with twice the threshold. Include
encryption count information in the TFS and TOFU_STATS lines.
(show_statistics): Also get information about the encrypted messages.
* g10/trustdb.c (tdb_get_validity_core): Use it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/import.c (impex_filter_getval): Add properties for key packets.
* g10/export.c (export_drop_subkey): New var.
(cleanup_export_globals): Release that var.
(parse_and_set_export_filter): Add filter "drop-subkey".
(apply_drop_subkey_filter): New.
(do_export_stream): Run that filter.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oWithTofuInfo): New.
(opts): Add --with-tofu-info.
(main): Set opt.with_tofu_info.
* g10/options.h (struct opt): Add field WITH_TOFU_INFO.
* g10/tofu.c (show_statistics): Add optional arg OUTFP and enter
special mode if not NULL. Change all callers.
(tofu_write_tfs_record): New.
* g10/keylist.c (list_keyblock_colon): Do not print the tofu policy as
part of the "uid" record. Print a new "tfs" record if the new option
is set.
* tests/openpgp/tofu.scm (getpolicy): Change from UID to TFS record.
--
A separate option is required to avoid slowing down key listings.
Foer example the current code takes for a keylisting in tofu+pgp mode
17 seconds while it takes more than 5 minutes if the option is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (write_stats_status): Add arg FP to print a colon
formated line. Adjust for changed TOFU_STATS interface.
(show_statistics): Let the query return timestamps and use
gnupg_get-time to compute the "time ago" values.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (opts): Remove fields 'system_service' and
'system_daemon'.
* common/homedir.c (dirmngr_sys_socket_name): Remove.
(dirmngr_user_socket_name): Rename to ...
(dirmngr_socket_name): this. Change call callers.
* common/asshelp.c (start_new_dirmngr): Remove the system socket
feature.
* tools/gpgconf.c (list_dirs): Do not print "dirmngr-sys-socket".
* sm/server.c (gpgsm_server): Adjust for removed system socket feature.
* dirmngr/server.c (cmd_getinfo): Ditto.
(cmd_killdirmngr): Remove check for system daemon.
(cmd_reloaddirmngr): Ditto.
* dirmngr/dirmngr.c (USE_W32_SERVICE): Remove macro.
(aService): Remove.
(opts): Remove --service.
(w32_service_control): Remove.
(real_main, call_real_main) [W32]: Remove wrapper.
(main): Remove Windows system service feature. Remove system dameon
feature. Use only the "~/.gnupg/dirmngr_ldapservers.conf" file.
* dirmngr/certcache.c (load_certs_from_dir): Remove warning in the
system dameon case.
* dirmngr/crlcache.c (DBDIR_D): Always use "~/.gnupg/crls.d".
* dirmngr/ocsp.c (validate_responder_cert): Do not call
validate_cert_chain which was used only in system daemon mode.
* dirmngr/validate.c (validate_cert_chain): Always use the code.
--
We are now starting dirmngr as needed as a user daemon. The
deprecated system daemon mode does not anymore make sense. In case a
system wide daemon is required, it is better to setup a dedicated
account to run dirmngr and tweak socket permissions accordingly.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Add field 'sender_list'.
* g10/gpg.c: Include mbox-util.h.
(oSender): New.
(opts): Add option "--sender".
(main): Parse option.
--
This option will eventually be used for more advanced purposes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h: Include stdint.h.
(struct opt): Add field 'input_size_hint'.
* g10/gpg.c (oInputSizeHint): New.
(opts): Add --input-size-hint.
(main): Set opt.input_size_hint.
* g10/progress.c (write_status_progress): Use the hint.
--
This is a prerequisite to fix
GnuPG-bug-id: 2368
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Remove field tofu_db_format.
* g10/gpg.h (server_control_s): Add fields tofu.batch_update_ref and
tofu.batch_update_started.
* g10/gpg.c (parse_tofu_db_format): Remove.
(main): Make option --tofu-db-format obsolete.
* g10/tofu.c: Major rework. Remove the pretty complicated and slower
split format and with that all the caching. Use the dbs struct
directly. Move global vars for batch update into CTRL. Change
calling conventions of some function to take CTRL or DBS pointers
instead of the former low-level database pointer.
--
The split database format might have been nice for use with Unison but
it bypasses the concept of a relational database by doing parts of
this itself and also risking deadlocks. Working with the Tofu
database for debugging or experiments is also not possible with parts
of the database logic implemented in gpg.
The Tofu support is quite new and we can assume that it is not in real
use now. Thus we better remove that now so that we do not need to
maintain it for all future.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): initialize opt.emit_version to 0
* doc/gpg.texi: document different default for --emit-version
--
The version of GnuPG in use is not particularly helpful. It is not
cryptographically verifiable, and it doesn't distinguish between
significant version differences like 2.0.x and 2.1.x.
Additionally, it leaks metadata that can be used to distinguish users
from one another, and can potentially be used to target specific
attacks if there are known behaviors that differ between major
versions.
It's probably better to take the more parsimonious approach to
metadata production by default.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/keylist.c (list_keyblock_colon): Remove arg FPR. Always print
fingerprint records. For secret keys always print keygrip records.
--
The fingerprint should always be used thus we should always print it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* tools/gpgconf.c (main) <aListDir>: Factor code out to ...
(list_dirs): new. Rewrite to use a table. Allow selection of a
items. Add "agent-ssh-socket".
--
This change makes the use of gpgconf in scripts easier. For example,
to set the envvar with the name of the socket used by ssh, it is now
possible to do this:
SSH_AUTH_SOCK="$(gpgconf --list-dirs agent-ssh-socket)"
which guarantees that the right name is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (EXPORT_PKA_FORMAT): New.
* g10/keylist.c (list_keyblock_pka): Do not use DANE flag.
* g10/export.c: Include zb32.h.
(parse_export_options): Add options "export-pka" and "export-dane".
(do_export): Do not armor if either of these option is set.
(print_pka_or_dane_records): New.
(do_export_stream): Implement new options.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/mkdefsinc.c (print_filename): New.
(main): Use it here.
--
Our Jenkins uses an @ in directory names and thus our builds break.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oRecipientFile, oHiddenRecipientFile): New.
(opts): Add options --recipient-file and --hidden-recipient-file.
(main): Implement them. Also remove duplicate code from similar
options.
* g10/keydb.h (PK_LIST_FROM_FILE): New.
(PK_LIST_SHIFT): Bump up.
* g10/pkclist.c (expand_group): Take care of PK_LIST_FROM_FILE.
(find_and_check_key): Add and implement arg FROM_FILE.
(build_pk_list): Pass new value for new arg.
* g10/getkey.c (get_pubkey_fromfile): New.
* g10/gpgv.c (read_key_from_file): New stub.
* g10/test-stubs.c (read_key_from_file): New stub.
* g10/server.c (cmd_recipient): Add flag --file.
* g10/import.c (read_key_from_file): New.
* tests/openpgp/defs.scm (key-file1): New.
(key-file2): New.
* tests/openpgp/setup.scm: Add their private keys and import the
key-file1.
* tests/openpgp/encrypt.scm: Add new test.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoKeyring): New.
(opts): Add "--no-keyring".
(main): Do not register any keyring if the option is used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oImportFilter): New.
(opts): Add --import-filter.
(main): Handle option.
* g10/import.c: Include recsel.h, init.h, and mbox-util.h.
(import_keep_uid): New global var.
(cleanup_import_globals): New.
(parse_and_set_import_filter): New.
(filter_getval): New.
(apply_keep_uid_filter): New.
(import_one): Apply filter if set.
--
Funny new option. It can for example be used to export a key with
only one user id:
gpg --no-options --import --import-options import-export \
--import-filter keep-uid='mbox=wk@gnupg.org' \
< full-key.pub > key-with-one-uid.pub
More features will eventually be added.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/revoke.c (get_default_uid_revocation_reason): New.
* g10/keyedit.c (menu_revuid): Break out creation of uid revocation
into new function core_revuid.
* g10/keyedit.c (keyedit_quick_revuid): New. Selects key and
uid, invokes core_revuid.
* g10/gpg.c (main): Handle --quick-revuid argument.
* doc/gpg.texi: Document --quick-revuid.
--
This functionality is a counterpart to --quick-adduid, and will be
useful for projects that depend programmatically on gpg to revoke user
IDs (one such example is "monkeysphere-host revoke-servicename").
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
- Minor re-indentation work.
- Changed a "0 == memcmp" to "!memcmp"
- Removed tests/openpgp/quick-key-manipulation.test from the
Makefile. This test needs to be converted to gpgscm.
- Removed example from whats-new-in-2.1.txt because that is generated.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/yat2m.c (ATTR_PRINTF, ATTR_NR_PRINTF, ATTR_MALLOC): New.
(die, err, inf, xmalloc, xcalloc): New prototypes with attributes.
(get_section_buffer): Take care of !N_SECTIONS.
(proc_texi_cmd): Cast precision format arg.
(proc_texi_buffer): Do not set IN_CMD when not used afterwards.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (parse_import_options): Add option "import-export".
(write_keyblock_to_output): New.
(import_one): Implement option.
--
We are now in the import export business.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/Makefile.am (dist_pkgdata_DATA): Move qualified.txt and
com-certs.pem to ...
(EXTRA_DIST): here.
--
With Let's Encrypt there is no more need to push CA Cert.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (struct opt): Add field flags.rfc4880bis.
* g10/gpg.c (oRFC4880bis): new.
(opts): add --rfc4880bis.
(main): Implement that and print a warning.
--
This is option enables experimental features which may be dropped or
changed with the next release.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Remove deprecation warning.
--
Most options for the keyserver have been moved to dirmngr and thus it
does not make sense to favor "--keyserver-options auto-key-retrieve"
over the direct options --auto-key-retrieve and --no-auto-key-retrieve.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oDisableSignerUID): New.
(opts): New option '--disable-signer-uid'.
(main): Set option.
* g10/options.h (opt): Add field flags.disable_signer_uid.
* g10/sign.c: Include mbox-util.h.
(mk_notation_policy_etc): Embed the signer's uid.
* g10/mainproc.c (check_sig_and_print): Do not use WKD for auto key
retrieval if --disable-signer-uid is used.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_signature): Add field 'signers_uid'.
* g10/parse-packet.c (parse_signature): Set this field.
* g10/free-packet.c (free_seckey_enc): Free field.
(copy_signature): Copy field.
* g10/mainproc.c (akl_has_wkd_method): New.
(check_sig_and_print): Extend NEWSIG status. If WKD is enabled try to
locate a missing key via the signature's Signer's User ID sub-packet.
Do this right before trying a keyserver lookup.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add option "none" to --keyid-format.
* g10/options.h (KF_NONE): New.
* g10/keyid.c (format_keyid): Implement that.
(keystr): Use format "long" is KF_NONE is in use.
(keystr_with_sub): Ditto.
* g10/keylist.c (list_keyblock_print): Adjust indentaion for KF_NONE.
Factor some code out to ...
(print_key_line): new.
(print_fingerprint): Add mode 20.
* g10/mainproc.c (list_node): Use print_key_line. Replace MAINKEY by
flags.primary in the PK. Fix putting a " revoked..." string into the
colons format.
* g10/pkclist.c (do_edit_ownertrust): Use print_key_line. This
slightly changes the putput format.
* g10/revoke.c (gen_standard_revoke): Use print_key_line. This may
also put "expires: " into the output.
--
Due to user experience problems with the keyid and we better allow to
show the fingerprint instead. Note that we do not support v3 keys
anymore and thus there is no technical need for a user to know the
keyid.
GnuPG-bug-id: 2379
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (DEFAULT_STD_SUBKEYUSE): New.
(ask_keysize): Factor code out to ...
(get_keysize_range, fixup_keysize): new.
(parse_parameter_usage): Factor parsing out to ...
(parse_usagestr): new. Allow use of "encr" as alias for "encrypt".
(parse_subkey_algostr_usagestr): New.
(generate_subkeypair): Add new args. Implement unattended mode.
* g10/keyedit.c (keyedit_quick_sign): Factor some code out to ...
(find_by_primary_fpr): new.
(keyedit_quick_addkey): New.
* g10/gpg.c (aQuickAddKey): New.
(opts): Add --quick-addkey.
(main): Implement.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (AC_CHECK_FUNCS): Remove tests for funopen.
--
Meanwhile we are using the portable functions from libgpg-error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (show_statistics): Print TOFU STATS with formatting
characters.
--
We better leave the non-breaking space character in the status
messages so that the caller can make use of them.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_KEY_CONSIDERED): New.
* g10/getkey.c: Include status.h.
(LOOKUP_NOT_SELECTED, LOOKUP_ALL_SUBKEYS_EXPIRED): New.
(finish_lookup): Add arg R_FLAGS. Count expired and revoked keys and
set flag. Check a requested usage before checking for expiraion or
revocation.
(print_status_key_considered): New.
(lookup): Print new status.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_delete_key): Make the --force option depend on
--disallow-loopback-passphrase.
* g10/call-agent.c (agent_delete_key): Add arg FORCE.
* g10/delkey.c (do_delete_key): Pass opt.answer_yes to
agent_delete_key.
--
Unless the agent has been configured with
--disallow-loopback-passpharse an unattended deletion of a secret key
is now possible with gpg by using --batch _and_ --yes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oNoAllowLoopbackPinentry): New.
(opts): Add --no-allow-loopback-pinentry. Hide
description of --allow-loopback-pinentry.
(parse_rereadable_options): Set opt.allow_loopback_pinentry by
default.
(main): Replace allow-loopback-pinentry by no-allow-loopback-pinentry
in the gpgconf list.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Ditto.
--
Given that a user can anyway change that options in the gpg-agent.conf
file and that gpg needs to be invoked with --pinentry-mode=loopback
the former default does not make much sense - in that option is useful
at all. There was a discussion of this topic on gnupg-devel in April
without a clear result. So we try this new default and just in case
real problems are found for the majority of installations, we can
revert that. The new default is also aligned with GnuPG's policy to
make its use easier and only require users with very high security
standards to tweak certain options (those users have anyway modeled
their threat model and configured their software according to this).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (parse_auto_key_locate): Add method "wkd".
(get_pubkey_byname): Implement that method. Also rename a variable.
* g10/call-dirmngr.c (gpg_dirmngr_wkd_get): New.
* g10/keyserver.c (keyserver_import_wkd): New.
* g10/test-stubs.c (keyserver_import_wkd): Add stub.
* g10/gpgv.c (keyserver_import_wkd): Ditto.
* g10/options.h (opt): Add field 'with_wkd_hash'.
(AKL_WKD): New.
* g10/gpg.c (oWithWKDHash): New.
(opts): Add option --with-wkd-hash.
(main): Set that option.
* g10/keylist.c (list_keyblock_print): Implement that option.
--
The Web Key Directory is an experimental feature to retrieve a key via
https. It is similar to OpenPGP DANE but also uses an encryption to
reveal less information about a key lookup.
For example the URI to lookup the key for Joe.Doe@Example.ORG is:
https://example.org/.well-known/openpgpkey/
hu/example.org/iy9q119eutrkn8s1mk4r39qejnbu3n5q
(line has been wrapped for rendering purposes). The hash is a
z-Base-32 encoded SHA-1 hash of the mail address' local-part. The
address wk@gnupg.org can be used for testing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/mkdefsinc.c (main): Add double include guard. Set variable
gpgtwohack. Define macros gpgname and gpgvname.
* doc/gpg.texi: Remove macro definition for gpgname. Use Texinfo var
gpgtwohack to prepare the man pages. Use @gpgname everywhere.
* doc/gpgv.texi: Likewise.
* doc/Makefile.am (myman_pages): Remove gpg2.1 and gpgv2.1 but add
them depending on USE_GPG2_HACK.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgsm.texi: Document '--pinentry-mode' and '--passphrase-fd'.
* sm/Makefile.am (gpgsm_SOURCES): Add new files
* sm/call-agent.c (struct default_inq_parm_s): New definition.
(start_agent): Pass in the pinentry mode.
(default_inq_cb): Handle 'PASSPHRASE' and 'NEW_PASSPHRASE' inquiries.
Adapt all call sites to the new callback cookie.
* sm/gpgsm.c (cmd_and_opt_values): Add new values.
(opts): Add new options.
(main): Handle new options.
* sm/gpgsm.h (struct opt): Add field 'pinentry_mode'.
* sm/passphrase.c: New file.
* sm/passphrase.h: Likewise.
GnuPG-bug-id: 1970
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gpgsm.texi: Drop description.
* sm/gpgsm.c (cmd_and_opt_values): Drop enum value.
(opts): Drop argument.
(main): Drop argument handling.
* sm/gpgsm.h (struct opt): Drop field 'fixed_passphrase'.
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gnupg-module-overview.svg: New.
* doc/debugging.texi (Component interaction): New.
* doc/Makefile.am (EXTRA_DIST): Add PNG and PDF versions of
gnupg-module-overview.svg. Remove two eps files.
(BUILT_SOURCES): Add gnupg-module-overview.pdf and .png. Remove
gnupg-card-architecture.epsl
(gnupg_TEXINFOS): Add gnupg-module-overview.svg
(gnupg.dvi): New.
(DISTCLEANFILES): Remove build eps files.
--
Many thanks to Emanuel Schütze for helping with the redesign of the
module overview. The original file has been used by mere for years in
talks but was never a proper part of GnuPG.
The EPS files have been removed due to their size. Thus to build the
"dvi" target the convert tool is required.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg-agent.texi (Agent Options): Add comment to the description
of --debug-quick-random that rngd can also be used to quickly generate
key.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/revoke.c (gen_standard_revoke): Improve header text for the
file. Add info output.
--
GnuPG-bug-id: 1724
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add LIST_SHOW_USAGE.
--
The usage flags are often useful and they don't take away much space
in a key listing. Thus it is better to have them enabled by default.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_WARNING): New.
* g10/call-agent.c (warn_version_mismatch): New.
(start_agent): Call warn function.
* g10/call-dirmngr.c: Include status.h.
(warn_version_mismatch): New.
(create_context): Call warn function.
* sm/call-agent.c (warn_version_mismatch): New.
(start_agent): Call warn function.
(gpgsm_agent_learn): Call warn function.
* sm/call-dirmngr.c (warn_version_mismatch): New.
(prepare_dirmngr): Call warn function.
--
We have seen too often bug reports which are due to still running old
versions of the daemons. To catch this problematic use we now print
warning messages and also provide the warning via the status
interface.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (opt): Turn field 'keyserver' into an strlist.
* dirmngr/dirmngr.c (parse_rereadable_options): Allow multiple
--keyserver options.
* dirmngr/server.c (server_local_s): Add field 'tor_state'.
(release_uri_item_list): New.
(release_ctrl_keyservers): Use it.
(start_command_handler): Release list of keyservers.
(is_tor_running): New.
(cmd_getinfo): Re-implement "tor" subcommand using new fucntion.
(ensure_keyserver): Rewrite.
* g10/dirmngr-conf.skel: Add two keyserver options.
--
This feature is independent of --use-tor and automagically uses Tor if
available. The dirmngr.conf file needs to specify two keyservers to
make this work. For new installations this is done using the skeleton
file. This feature requires the Libassuan 2.4.2 to work.
This patch also fixes a memory leak of opt.keyserver en passant.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (menu_select_key): Take an additional argument, p.
Update callers. If P is a hex string, then assume that P is a key id
or fingerprint and select subkeys with matching key ids or
fingerprints.
* doc/gpg.texi: Update documentation for the key subcommand.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1423
Debian-bug-id: 610336
* g10/options.h (opt): Add field only_sign_text_ids.
* g10/gpg.c (enum cmd_and_opt_values): Add value oOnlySignTextIDs.
(opts): Handle oOnlySignTextIDs.
(main): Likewise.
* g10/keyedit.c (sign_uids): If OPT.ONLY_SIGN_TEXT_IDS is set, don't
select non-text based IDs automatically.
(keyedit_menu): Adapt the prompt asking to sign all user ids according
to OPT.ONLY_SIGN_TEXT_IDS.
* doc/gpg.texi: Document the new option --only-sign-text-ids.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1241
Debian-bug-id: 569702
* doc/gpg.texi: Update the description of some options which are
now enabled by default.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* g10/options.h: Add additional_weak_digests linked list to opts.
* g10/main.h: Declare weakhash linked list struct and
additional_weak_digest() function to insert newly-declared weak
digests into opts.
* g10/misc.c: (additional_weak_digest): New function.
(print_digest_algo_note): Check for deprecated digests; use proper
gcry_md_algos type.
* g10/sig-check.c: (do_check): Reject weak digests in addition to MD5.
* g10/gpg.c: Add --weak-digest option to gpg.
* doc/gpg.texi: Document gpg --weak-digest option.
* g10/gpgv.c: Add --weak-digest option to gpgv.
* doc/gpgv.texi: Document gpgv --weak-digest option.
--
gpg and gpgv treat signatures made over MD5 as unreliable, unless the
user supplies --allow-weak-digests to gpg. Signatures over any other
digest are considered acceptable.
Despite SHA-1 being a mandatory-to-implement digest algorithm in RFC
4880, the collision-resistance of SHA-1 is weaker than anyone would
like it to be.
Some operators of high-value targets that depend on OpenPGP signatures
may wish to require their signers to use a stronger digest algorithm
than SHA1, even if the OpenPGP ecosystem at large cannot deprecate
SHA1 entirely today.
This changeset adds a new "--weak-digest DIGEST" option for both gpg
and gpgv, which makes it straightforward for anyone to treat any
signature or certification made over the specified digest as
unreliable.
This option can be supplied multiple times if the operator wishes to
deprecate multiple digest algorithms, and will be ignored completely
if the operator supplies --allow-weak-digests (as before).
MD5 is still always considered weak, regardless of any further
--weak-digest options supplied.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Capitialized some comments, shorted a line in do_check, and changed
subject to name the option. -wk
* dirmngr/dirmngr.c (set_tor_mode): New.
(main, reread_configuration): Call it.
* dirmngr/http.c (http_raw_connect, send_request): Check whether TOR
mode is enabled if the FORCE_TOR flag is given.
--
The patch for http.c is a sanity check because tor mode is anyway
global as long as the Assuan socket wrappers are used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Check for sqlite3.
(SQLITE3_CFLAGS): AC_SUBST it.
(SQLITE3_LIBS): Likewise.
* g10/Makefile.am (AM_CFLAGS): Add $(SQLITE3_CFLAGS).
(gpg2_SOURCES): Add tofu.h and tofu.c.
(gpg2_LDADD): Add $(SQLITE3_LIBS).
* g10/tofu.c: New file.
* g10/tofu.h: New file.
* g10/options.h (trust_model): Define TM_TOFU and TM_TOFU_PGP.
(tofu_db_format): Define.
* g10/packet.h (PKT_signature): Add fields digest and digest_len.
* g10/gpg.c: Include "tofu.h".
(cmd_and_opt_values): Declare aTOFUPolicy, oTOFUDefaultPolicy,
oTOFUDBFormat.
(opts): Add them.
(parse_trust_model): Recognize the tofu and tofu+pgp trust models.
(parse_tofu_policy): New function.
(parse_tofu_db_format): New function.
(main): Initialize opt.tofu_default_policy and opt.tofu_db_format.
Handle aTOFUPolicy, oTOFUDefaultPolicy and oTOFUDBFormat.
* g10/mainproc.c (do_check_sig): If the signature is good, copy the
hash to SIG->DIGEST and set SIG->DIGEST_LEN appropriately.
* g10/trustdb.h (get_validity): Add arguments sig and may_ask. Update
callers.
(tdb_get_validity_core): Add arguments sig and may_ask. Update
callers.
* g10/trust.c (get_validity) Add arguments sig and may_ask. Pass them
to tdb_get_validity_core.
* g10/trustdb.c: Include "tofu.h".
(trust_model_string): Handle TM_TOFU and TM_TOFU_PGP.
(tdb_get_validity_core): Add arguments sig and may_ask. If
OPT.TRUST_MODEL is TM_TOFU or TM_TOFU_PGP, compute the TOFU trust
level. Combine it with the computed PGP trust level, if appropriate.
* g10/keyedit.c: Include "tofu.h".
(show_key_with_all_names_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/keylist.c: Include "tofu.h".
(public_key_list): Also show the PGP stats if the trust model is
TM_TOFU_PGP.
(list_keyblock_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/pkclist.c: Include "tofu.h".
* g10/gpgv.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* g10/test-stubs.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* doc/DETAILS: Describe the TOFU Policy field.
* doc/gpg.texi: Document --tofu-set-policy, --trust-model=tofu,
--trust-model=tofu+pgp, --tofu-default-policy and --tofu-db-format.
* tests/openpgp/Makefile.am (TESTS): Add tofu.test.
(TEST_FILES): Add tofu-keys.asc, tofu-keys-secret.asc,
tofu-2183839A-1.txt, tofu-BC15C85A-1.txt and tofu-EE37CF96-1.txt.
(CLEANFILES): Add tofu.db.
(clean-local): Add tofu.d.
* tests/openpgp/tofu.test: New file.
* tests/openpgp/tofu-2183839A-1.txt: New file.
* tests/openpgp/tofu-BC15C85A-1.txt: New file.
* tests/openpgp/tofu-EE37CF96-1.txt: New file.
* tests/openpgp/tofu-keys.asc: New file.
* tests/openpgp/tofu-keys-secret.asc: New file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/options.h (opt): Add field "print_dane_records".
* g10/gpg.c (oPrintDANERecords): new.
(opts): Add --print-dane-records.
(main): Set that option.
* g10/export.c (do_export): Remove EXPORT_DANE_FORMAT handling.
(do_export_stream): Add EXPORT_DANE_FORMAT handling.
* g10/keylist.c (list_keyblock_pka): Implement DANE record printing.
* g10/gpgv.c (export_pubkey_buffer): New stub.
* g10/test-stubs.c (export_pubkey_buffer): New stub.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (parse_rereadable_options): Do tilde expansion and
check for cert file existance in option --hkp-cacert.
--
GnuPG-bug-id: 2120
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_refresh): Change return type to
gpg_error_t. Use gpg_dirmngr_ks_list to print the name of the
keyserver to use.
(keyserver_search): Do not print the "no keyserver" error
message. The same error is anyway returned from dirmngr.
* g10/call-dirmngr.c (ks_status_parm_s): Add field "keyword".
(ks_status_cb): Handle other status keywords.
(gpg_dirmngr_ks_list): New.
* tools/gpgconf-comp.c (gc_options_gpg): Deprecate "keyserver".
(gc_options_dirmngr): Add "Keyserver" group and "keyserver".
--
Along with the corresponding dirmngr change this option allows to
configure the keyserver only in dirmngr.conf. Existing
configurations will continue to work. However, GUIs using gpgconf
now the keyserver option under the dirmngr (aka Key Acquirer) tab
unless they are in export mode in which the keyserver option is also
show for gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (oKeyServer): New.
(opts): Add "keyserver".
(parse_rereadable_options): Parse that options
(main): Add option to the gpgconf list.
* dirmngr/dirmngr.h (opt): Add field "keyserver".
* dirmngr/server.c (ensure_keyserver): New.
(make_keyserver_item): New. Factored out from
(cmd_keyserver): here. Call ensure_keyserver.
(cmd_ks_search): Call ensure_keyserver.
(cmd_ks_get): Ditto.
(cmd_ks_fetch): Ditto.
(cmd_ks_put): Ditto.
--
This option specifies the keyserver to be used if the client does not
set another keyserver. We want to fade out the use of --keyserver in
gpg.conf in favor of specifying it here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (print_and_check_one_sig): Add arg "extended" and
print an asterisk for the chosen selfsig.
(check_all_keysigs): Add arg "only_selfsig"
(keyedit_menu) <cmdCHECK>: Add optional arg "selfsig".
--
Using "check selfsig" prints only the self-signatures and indicates
the chosen selfsig with an asterisk.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Remove --no-sig-create-check.
* g10/options.h (struct opt): Remove field no_sig_create_check.
* g10/sign.c (do_sign): Always check unless it is RSA and we are using
Libgcrypt 1.7.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_FAILURE): New.
* g10/cpr.c (write_status_failure): New.
* g10/gpg.c (main): Call write_status_failure for all commands which
print an error message here.
* g10/call-agent.c (start_agent): Print an STATUS_ERROR if we can't
set the pinentry mode.
--
This status line can be used similar to the error code returned by
commands send over the Assuan interface in gpgsm. We don't emit them
in gpgsm because there we already have that Assuan interface to return
proper error code. This change helps GPGME to return better error
codes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* po/POTFILES.in (trust.c): Add missing file.
* po/de.po: Changed German validity strings.
* doc/help.de.txt: Ditto.
--
Note that I replaced "uneingeschränkt" in de.po to "ultimativ" to
make the output better readable.
* g10/keydb.h (KEYDB_RESOURCE_FLAG_GPGVDEF): New.
* g10/keydb.c (keydb_add_resource): Take care of new flag.
* g10/gpgv.c (main): Use new flag.
--
GnuPG-bug-id: 2025
Signed-off-by: Werner Koch <wk@gnupg.org>
--
The claim that VALIDSIG is the same as GOODSIG is simply wrong.
Attempt to clarify it. Also, the paragraph about primary-key-fpr and
sig-version was weirdly re-ordered during the org-mode conversion in
65eb98966a569a91c97d0c23ba5582a9a7558de0; repair it.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* tools/gpgsm-gencert.sh: remove deprecated script entirely. It is
fully replaced by gpgsm --gen-key
* doc/tools.texi: remove gpgsm-gencert.sh documentation
* .gitignore: no longer ignore gpgsm-gencert.sh manpage
* doc/Makefile.am: quit making the manpage
* tools/Makefile.am: quit distributing the script
* doc/howto-create-a-server-cert.texi: overhaul documentation to use
gpgsm --gen-key and tweak explanations
--
The commit deprecating gpgsm-gencert.sh
(81972ca7d5) dates back exactly 6 years.
https://codesearch.debian.net/results/gpgsm-gencert.sh
suggests that in all of debian it is only referenced in documentation
(for poldi and scute) and example files (libept), and isn't actually
used directly anywhere.
Furthermore, trying to use gpgsm-gencert.sh to make a simple webserver
certificate-signing request failed for me, following the examples in
doc/howto-create-a-server-cert.texi exactly.
It's time we ripped off this band-aid :)
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/agent.h (opt): Remove field ssh_support.
* agent/gpg-agent.c (ssh_support): New. Replace all opt.ssh_support
by this.
(main): Do not set ssh_support along with setting putty_support.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/server.c (option_handler): Add "offline".
(cmd_getinfo): Ditto.
* sm/certchain.c (is_cert_still_valid):
(do_validate_chain):
* sm/gpgsm.c (gpgsm_init_default_ctrl): Default "offline" to the value
of --disable-dirmngr.
* sm/call-dirmngr.c (start_dirmngr_ext): Better also check for
ctrl->offline.
--
Adding this option makes it easier to implement the corresponding
feature in gpgme.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Change arg for oDebug to a string.
(debug_flags): New; factored out from set_debug.
(set_debug): Remove "--debug-level help". Use parse_debug_flag to
print the used flags.
(main): Use parse_debug_flag for oDebug.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Under Windows the file names are determined at runtime. To have
somewhat useful names in the manuals, we provide replacements using
the strings "INSTDIR" and "APPDATA" for the installation directory and
the user specific application data.
* agent/agent.h (opt): Add field allow_emacs_pinentry.
* agent/call-pinentry.c (start_pinentry): Act upon new var.
* agent/gpg-agent.c (oAllowEmacsPinentry): New.
(opts): Add option --allow-emacs-pinentry.
(parse_rereadable_options): Set this option.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add new option.
--
gpgconf-comp and manual entry added by wk.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/mkdefsinc.c: New.
* doc/Makefile.am: Include cmacros.am.
(EXTRA_DIST): Add mkdefsinc.c defsincdate.
(BUILT_SOURCES): Add defsincdate
(CLEANFILES): Add mkdefsinc and defs.inc.
(mkdefsinc): New rule.
(yat2m-stamp): Depend on defs.inc.
($(myman_pages) gnupg.7): Ditto.
(gnupg.texi): Remove rule to touch itself.
(dist-hook): New.
(defsincdate): New.
(defs.inc): New.
* doc/gnupg.texi: Remove inclusion of version.texi. Include defs.inc.
Also include defs.inc in all files used to build man files. Change
fixed directory names to those from defs.inc.
--
GnuPG-bug-id: 1661
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Add field allow_external_cache.
* agent/call-pinentry.c (start_pinentry): Act upon new var.
* agent/gpg-agent.c (oNoAllowExternalCache): New.
(opts): Add option --no-allow-external-cache.
(parse_rereadable_options): Set this option.
--
Pinentry 0.9.2 may be build with libsecret support and thus an extra
checkbox is displayed to allow the user to get passwords out of an
libsecret maintained cache. Security aware user may want to avoid
this feature and may do this at runtime by enabling this option.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oDebugPinentry): New.
(opts): Add --debug-pinentry.
(parse_rereadable_options): Set that option.
* agent/call-pinentry.c (start_pinentry): Pass option to
assuan_set_flag.
--
This option is quite useful to see the IPC between gpg-agent and
Pinentry. Note that "debug 1024" is also required.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (KEYSERVER_HTTP_PROXY): New.
(KEYSERVER_USE_TEMP_FILES, KEYSERVER_KEEP_TEMP_FILES): Remove.
(KEYSERVER_TIMEOUT): New.
* common/keyserver.h (KEYSERVER_TIMEOUT): Remove.
* g10/keyserver.c (keyserver_opts): Remove obsolete "use-temp-files"
and "keep-temp-files". Add "http-proxy" and "timeout".
(parse_keyserver_options): Remove 1.2 compatibility option
"honor-http_proxy". Remove "use-temp-files" and "keep-temp-files"
code.
--
Note that many of these options where implicitly used by passing any
unknown option down to the former keyserver helpers. The don't exist
anymore thus we need to make them explicit. Another patch will convey
them to dirmngr. Temp files are not anymore used thus they can be
removed and will be ignored when used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oDebugIOLBF): new.
(opts): Add --debug-iolbf.
(main): Set option.
--
This option is convenient for debugging to make sure that debug output
to stderr is synced with output to stdout.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (check_sig_and_print): Emit STATUS_NEWSIG.
--
gpgsm does this for a long time but somehow it never made it into gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (set_packet_list_mode): Set mpi_print_mode.
* g10/misc.c (mpi_print): Do not print an extra leading zero.
--
This was in older versions possible using "--debug 4" but that was
disabled in 2.1 due to a conflict using this values also for
Libgcrypt. Now the values are dumped either with --debug 4 or using
--list-packets along with --verbose.
Because OpenPGP only uses unsigned integers an extra leading zero will
not be printed anymore.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aPrintPKARecords): Rename to oPrintPKARecords and do not
use it as a command.
* g10/keylist.c (list_keyblock): List PKA rceords also for secret
keys.
--
An option allows to use it more flexible. For example to select only
secret keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/certcache.c (cert_cache_init): Load certificates
from sysconfig dir instead of the homeidr.
* dirmngr/dirmngr.c (main): Removed parsing of obsolete
homedir_data option.
* dirmngr/dirmngr.h (opt): Removed homedir_data.
* doc/dirmngr.texi: Update and clarify certs directory doc.
--
Using the homedir for extra-certs and trusted-certs makes
little sense when dirmngr is used with a caller that
manages it's own store of certificates and can
provide those through the SENDCERT command.
You can use trusted-certs and extra-certs to provide
users with a base of locally available certificates that are
not already in store of the applications.
* common/homedir.c (get_default_pinentry_name): New.
(gnupg_module_name): Use that for the default pinentry.
(gnupg_module_name_flush_some): New.
* agent/gpg-agent.c (agent_sighup_action): Flush some module names.
* agent/call-pinentry.c (start_pinentry): Do not modify
opt.pinentry_program.
--
The idea with this change is that under Windows we can install a
simple native Windows pinentry as "pinentry-basic" and a full GUI
version may then later install pinentry-gtk etc which would then
automatically be used.
Unfortunately installing another pinentry from a different package
would clobber the GnuPG core directory which is not nice. To fix that
we would need to agree on standard installation directories for GUIs
to also look there.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
GnuPG-bug-id: 1602
I added options shown with --help but missing in the man page.
However, --help won't show everything listed in the man age and
frankly there are even more options not listed anywhere (to see them
use --dump-options).
* g10/keygen.c: Include shareddefs.h.
(quick_generate_keypair): Support static passphrase.
(get_parameter_passphrase): New.
(do_generate_keypair): Use it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (GPG_ERR_OBJ_TERM_STATE): New.
* scd/iso7816.c (map_sw): Add this error code.
* scd/app-openpgp.c (do_getattr): Return the life cycle indicator.
* scd/app.c (select_application): Allow a return value of
GPG_ERR_OBJ_TERM_STATE.
* scd/scdaemon.c (set_debug): Print the DBG_READER value.
* g10/call-agent.c (start_agent): Print a status line for the
termination state.
(agent_scd_learn): Make arg "info" optional.
(agent_scd_apdu): New.
* g10/card-util.c (send_apdu): New.
(factory_reset): New.
(card_edit): Add command factory-reset.
Signed-off-by: Werner Koch <wk@gnupg.org>
doc: Document no-allow-mark-trusted for gpg-agent
* doc/gpg-agent.texi: Change allow-mark-trusted doc to
no-allow-mark-trusted.
--
Since rev. 78a56b14 allow-mark-trusted is the default option
and was replaced by no-allow-mark-trusted to disable the
interactive prompt.
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* agent/agent.h (opt): Add field extra_socket.
(server_control_s): Add field restricted.
* agent/command.c: Check restricted flag on many commands.
* agent/gpg-agent.c (oExtraSocket): New.
(opts): Add option --extra-socket.
(socket_name_extra): New.
(cleanup): Cleanup that socket name.
(main): Implement oExtraSocket.
(create_socket_name): Add arg homedir and change all callers.
(create_server_socket): Rename arg is_ssh to primary and change
callers.
(start_connection_thread): Take ctrl as arg.
(start_connection_thread_std): New.
(start_connection_thread_extra): New.
(handle_connections): Add arg listen_fd_extra and replace the
connection starting code by parameterized loop.
* common/asshelp.c (start_new_gpg_agent): Detect the use of the
restricted mode and don't fail on sending the pinentry environment.
* common/util.h (GPG_ERR_FORBIDDEN): New.
* g10/import.c (stats_s): Add field v3keys.
(import): Update this field.
(import_print_stats): Print v3 key count.
(read_block): Skip v3 keys and return a count for them.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/openfile.c (open_sigfile): Factor some code out to ...
(get_matching_datafile): new function.
* g10/plaintext.c (hash_datafiles): Do not try to find matching file
in batch mode.
* g10/mainproc.c (check_sig_and_print): Print a warning if a possibly
matching data file is not used by a standard signatures.
--
Allowing to use the abbreviated form for detached signatures is a long
standing bug which has only been noticed by the public with the
release of 2.1.0. :-(
What we do is to remove the ability to check detached signature in
--batch using the one file abbreviated mode. This should exhibit
problems in scripts which use this insecure practice. We also print a
warning if a matching data file exists but was not considered because
the detached signature was actually a standard signature:
gpgv: Good signature from "Werner Koch (dist sig)"
gpgv: WARNING: not a detached signature; \
file 'gnupg-2.1.0.tar.bz2' was NOT verified!
We can only print a warning because it is possible that a standard
signature is indeed to be verified but by coincidence a file with a
matching name is stored alongside the standard signature.
Reported-by: Simon Nicolussi (to gnupg-users on Nov 7)
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_KEEP_OWNERTTRUST): New.
* g10/import.c (parse_import_options): Add "keep-ownertrust".
(import_one): Act upon new option.
--
This option is in particular useful to convert from a pubring.gpg to
the new pubring.kbx in GnuPG 2.1 or vice versa:
gpg1 --export | gpg2 --import-options keep-ownertrust --import
* doc/com-certs.pem: Remove certifciates.
--
They might be useful for the chain validation mode but I doubt that it
is used often enough to justify having all these expired certificates
in the store.
* g10/keygen.c: Remove unused PASSPHRASE related code.
(proc_parameter_file): Remove useless asking for a passphrase in batch
mode.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oDebugQuickRandom): New.
(opts): New option --debug-quick-random.
(main): Use new option.
* common/asshelp.c (start_new_gpg_agent): Add hack to pass an
additional argument for the agent name.
* tests/openpgp/defs.inc: Pass --debug-quick-random to the gpg-agent
starting parameters.
* tests/openpgp/version.test: Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (do_key): Remove support for building v3 keys.
* g10/parse-packet.c (read_protected_v3_mpi): Remove.
(parse_key): Remove support for v3-keys. Add dedicated warnings for
v3-key packets.
* g10/keyid.c (hash_public_key): Remove v3-key support.
(keyid_from_pk): Ditto.
(fingerprint_from_pk): Ditto.
* g10/options.h (opt): Remove fields force_v3_sigs and force_v4_certs.
* g10/gpg.c (cmd_and_opt_values): Remove oForceV3Sigs, oNoForceV3Sigs,
oForceV4Certs, oNoForceV4Certs.
(opts): Turn --force-v3-sigs, --no-force-v3-sigs, --force-v4-certs,
--no-force-v4-certs int dummy options.
(main): Remove setting of the force_v3_sigs force_v4_certs flags.
* g10/revoke.c (gen_revoke, create_revocation): Always create v4 certs.
* g10/sign.c (hash_uid): Remove support for v3-signatures
(hash_sigversion_to_magic): Ditto.
(only_old_style): Remove this v3-key function.
(write_signature_packets): Remove support for creating v3-signatures.
(sign_file): Ditto.
(sign_symencrypt_file): Ditto.
(clearsign_file): Ditto. Remove code to emit no Hash armor line if
only v3-keys are used.
(make_keysig_packet): Remove arg SIGVERSION and force using
v4-signatures. Change all callers to not pass a value for this arg.
Remove all v3-key related code.
(update_keysig_packet): Remove v3-signature support.
* g10/keyedit.c (sign_uids): Always create v4-signatures.
* g10/textfilter.c (copy_clearsig_text): Remove arg pgp2mode and
change caller.
--
v3 keys are deprecated for about 15 years and due the severe
weaknesses of MD5 it does not make any sense to keep code around to
use these old and broken keys. Users who need to decrypt old messages
should use gpg 1.4 and best re-encrypt them to modern standards.
verification of old (i.e. PGP2) created signatures is thus also not
anymore possible but such signatures have no values anyway - MD5 is
just too broken.
We have also kept support for v3 signatures until now. With the
removal of support for v3 keys it is questionable whether it makes any
sense to keep support for v3-signatures. What we do now is to keep
support for verification of v3-signatures but we force the use of
v4-signatures. The latter makes the --pgp6 and --pgp7 switch a bit
obsolete because those PGP versions require v3-signatures for
messages. These versions of PGP are also really old and not anymore
maintained so they have not received any bug fixes and should not be
used anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (stats_s): Remove field "imported_rsa".
(import_print_stats): Do not print separate value for RSA.
(import_one): Remove the RSA counter.
--
RSA is the standard key format and thus there is no more need to have
a separate counter. This is a remain from the RSA patent times.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Added --enable-large-secmem option.
* g10/options.h: Add opt.flags.large_rsa.
* g10/gpg.c: Contingent on configure option: adjust secmem size,
add gpg --enable-large-rsa, bound to opt.flags.large_rsa.
* g10/keygen.c: Adjust max RSA size based on opt.flags.large_rsa
* doc/gpg.texi: Document --enable-large-rsa.
--
This is a cherry-pick of 534e2876ac from
STABLE-BRANCH-1-4 against master
Some older implementations built and used RSA keys up to 16Kib, but
the larger secret keys now fail when used by more recent GnuPG, due to
secure memory limitations.
Building with ./configure --enable-large-secmem will make gpg
capable of working with those secret keys, as well as permitting the
use of a new gpg option --enable-large-rsa, which let gpg generate RSA
keys up to 8Kib when used with --batch --gen-key.
Debian-bug-id: 739424
Minor edits by wk.
GnuPG-bug-id: 1732
--
Due to todays reminder:
On Tue 2014-04-22 18:46:15 -0400, Daniel Kahn Gillmor wrote:
> With --trust-model=always, all keys and user IDs are considered
> automatically valid; they are not automatically trusted (setting
> universal ownertrust to anything other than "ultimate" would be
> insufficient to acheive the effect of --trust-model=always, due to
> --max-cert-depth and certificate path reachability).
>
> Thanks to Nicolai Josuttis for pointing out this documentation
error.
* agent/agent.h (opt): Remove field use_standard_socket.
* agent/command.c (cmd_killagent): Always allow killing.
* agent/gpg-agent.c (main): Turn --{no,}use-standard-socket and
--write-env-file into dummy options. Always return true for
--use-standard-socket-p. Do not print the GPG_AGENT_INFO envvar
setting or set that envvar.
(create_socket_name): Simplify by removing non standard socket
support.
(check_for_running_agent): Ditto.
* common/asshelp.c (start_new_gpg_agent): Remove GPG_AGENT_INFO use.
* common/simple-pwquery.c (agent_open): Ditto.
* configure.ac (GPG_AGENT_INFO_NAME): Remove.
* g10/server.c (gpg_server): Do not print the AgentInfo comment.
* g13/server.c (g13_server): Ditto.
* sm/server.c (gpgsm_server): Ditto.
* tools/gpgconf.c (main): Simplify by removing non standard socket
support.
--
The indented fix to allow using a different socket than the one in the
gnupg home directory is to change Libassuan to check whether the
socket files exists as a regualr file with a special keyword to
redirect to another socket file name.
* g10/gpg.c (aFullKeygen): New.
(opts): Add command --full-key-gen.
(main): Implement it.
* g10/keygen.c (DEFAULT_STD_ALGO): Replace wrong GCRY_PK_RSA although
the value is identical.
(DEFAULT_STD_CURVE): New.
(DEFAULT_STD_SUBALGO): New.
(DEFAULT_STD_SUBKEYSIZE): New.
(DEFAULT_STD_SUBCURVE): New.
(quick_generate_keypair): Use new macros here.
(generate_keypair): Add arg "full" and fix call callers. Do not ask
for keysize in non-full node.
(ask_user_id): Add arg "full" and simplify for non-full mode.
* g10/main.h (DEFAULT_CIPHER_ALGO): Chhange to AES or CAST5 or 3DES
depending on configure option.
* g10/gpg.c (main): Set opt.s2k_cipher_algo to DEFAULT_CIPHER_ALGO.
* doc/yat2m.c (variablelist): New.
(set_variable): New.
(macro_set_p): Also check the variables.
(proc_texi_cmd): Support the @value command.
(parse_file): Support the @set command.
(top_parse_file): Release variablelist.
* g10/gpg.c (oRFC1991, oPGP2): Remove
(opts): Remove --pgp2 and --rfc1991.
* g10/options.h (CO_PGP2, CO_RFC1991): Remove. Remove all users.
(RFC2440, PGP2): Remove. Remove all code only enabled by these
conditions.
* tests/openpgp/clearsig.test: Remove --rfc1991 test.
--
The use of PGP 2.c is considered insecure for quite some time
now (e.g. due to the use of MD5). Thus we remove all support for
_creating_ PGP 2 compatible messages.
* scd/app-sc-hsm.c: New.
* scd/app.c (select_application, get_supported_applications): Register
new app.
--
Add a read/only driver for scdaemon that provides access to keys and
certificates on a SmartCard-HSM (www.smartcard-hsm.com).
The driver supports RSA and ECC keys on SmartCard-HSM cards and
USB-Sticks.
The driver does not yet support the MicroSD edition.
--
ChangeLog and FSF copyright year fix by wk.
* g10/gpg.c (aQuickKeygen): New.
* g10/misc.c (is_valid_user_id): New stub.
* g10/keygen.c (quickgen_set_para): New.
(quick_generate_keypair): New.
--
Note that the validation of the specified user id has not yet been
implemented.
* g10/gpg.c: Add option --with-secret.
* g10/options.h (struct opt): Add field with_secret.
* g10/keylist.c (public_key_list): Pass opt.with_secret to list_all
and list_one.
(list_all, list_one): Add arg mark_secret.
(list_keyblock_colon): Add arg has_secret.
* sm/gpgsm.c: Add option --with-secret.
* sm/server.c (option_handler): Add option "with-secret".
* sm/gpgsm.h (server_control_s): Add field with_secret.
* sm/keylist.c (list_cert_colon): Take care of with_secret. Also move
the token string from the wrong field 14 to 15.
--
This option is useful for key managers which need to know whether a
key has a secret key. This change allows to collect this information
in one pass.
* g10/photoid.c (show_photos): Set namehash.
* g10/misc.c (pct_expando): Add "%U" expando.
--
This makes is possible to extract all photos ids from a key to
different files.
* g10/gpg.c (oLegacyListMode, opts, main): Add --legacy-list-mode.
* g10/options.h (struct opt): Add field legacy_list_mode.
* g10/keydb.h (PUBKEY_STRING_SIZE): New.
* g10/keyid.c (pubkey_string): New.
* g10/import.c (import_one, import_secret_one): Use pubkey_string.
* g10/keylist.c (print_seckey_info): Ditto.
(print_pubkey_info, print_card_key_info): Ditto.
(list_keyblock_print): Ditto.
* g10/mainproc.c (list_node): Ditto.
* g10/pkclist.c (do_edit_ownertrust, build_pk_list): Ditto.
* g10/keyedit.c (show_key_with_all_names): Ditto. Also change the
format.
(show_basic_key_info): Ditto.
* common/openpgp-oid.c (openpgp_curve_to_oid): Also allow "ed25519".
(openpgp_oid_to_curve): Downcase "ed25519"
--
For ECC it seems to be better to show the name of the curve and not
just the size of the prime field. The curve name does not anymore fit
into the "<size><letter>" descriptor (e.g. "2048R") and a fixed length
format does not work either. Thus the new format uses
"rsa2048" - RSA with 2048 bit
"elg1024" - Elgamal with 1024 bit
"ed25519" - ECC using the curve Ed25519.
"E_1.2.3.4" - ECC using the unsupported curve with OID "1.2.3.4".
unless --legacy-list-mode is given. In does not anymore line up
nicely in columns thus I expect further changes to this new format.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_strings): New.
(write_status_text): Replace code by a call to write_status_strings.
* g10/mainproc.c (proc_encrypted): Remove show_session_key code.
* g10/decrypt-data.c (decrypt_data): Add new show_session_key code.
--
This feature can be used to return the session key for just a part of
a file. For example to downloading just the first 32k of a huge file,
decrypting that incomplete part and while ignoring all the errors
break out the session key. The session key may then be used on the
server to decrypt the entire file without the need to have the private
key on the server.
GnuPG-bug-id: 1389
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Rename field no_version to emit_version.
* g10/gpg.c (main): Init opt.emit_vesion to 1. Change --emit-version
to bump up opt.emit_version.
* g10/armor.c (armor_filter): Implement different --emit-version
values.
--
GnuPG-bug-id: 1572
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/findkey.c (key_parms_from_sexp): Add algo name "ecc".
(agent_is_dsa_key): Ditto.
(agent_is_eddsa_key): New. Not finished, though.
* agent/pksign.c (do_encode_eddsa): New.
(agent_pksign_do): Use gcry_log_debug functions.
* agent/protect.c (agent_protect): Parse a flags parameter.
* g10/keygen.c (gpg_curve_to_oid): Move to ...
* common/openpgp-oid.c (openpgp_curve_to_oid): here and rename.
(oid_ed25519): New.
(openpgp_oid_is_ed25519): New.
(openpgp_oid_to_curve): New.
* common/t-openpgp-oid.c (test_openpgp_oid_is_ed25519): New.
* g10/build-packet.c (gpg_mpi_write): Write the length header also for
opaque MPIs.
(gpg_mpi_write_nohdr): New.
(do_key): Use gpg_mpi_write_nohdr depending on algorithm.
(do_pubkey_enc): Ditto.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Use
gpg_mpi_write_nohdr.
* g10/export.c (transfer_format_to_openpgp):
* g10/keygen.c (ecckey_from_sexp): Return the error.
(gen_ecc): Repalce arg NBITS by CURVE.
(read_parameter_file): Add keywords "Key-Curve" and "Subkey-Curve".
(ask_curve): New.
(generate_keypair, generate_subkeypair): Use ask_curve.
(do_generate_keypair): Also pass curve name.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Print
curve name.
* g10/parse-packet.c (mpi_read): Remove workaround for
Libcgrypt < 1.5.
(parse_key): Fix ECC case. Print the curve name.
* g10/pkglue.c (mpi_from_sexp): Rename to get_mpi_from_sexp.
(pk_verify, pk_check_secret_key): Add special case for Ed25519.
* g10/seskey.c (encode_md_value): Ditto.
* g10/sign.c (do_sign, hash_for, sign_file): Ditto.
--
Be warned that this code is subject to further changes and that the
format will very likely change before a release. There are also known
bugs and missing code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/yat2m.c (MAX_CONDITION_NESTING): New.
(gpgone_defined): Remove.
(condition_s, condition_stack, condition_stack_idx): New.
(cond_is_active, cond_in_verbatim): New.
(add_predefined_macro, set_macro, macro_set_p): New.
(evaluate_conditions, push_condition, pop_condition): New.
(parse_file): Rewrite to use the condition stack.
(top_parse_file): Set prefined macros.
(main): Change -D to define arbitrary macros.
--
This change allows the use of other conditionals than "gpgone" and
thus make "gpgtwoone" et al. actually work. It does now also track
conditionals over included files.
Signed-off-by: Werner Koch <wk@gnupg.org>
