* common/homedir.c (copy_dir_with_fixup): New.
(default_homedir): Use here.
(gnupg_set_homedir): And here .
--
This actually fixes a couple of cases for Windows. Both --home-dir
and GNUPGHOME. The interpretation of "c:" -> "c:/" might not be the
correct one but because we need an absolute dir anyway it is the less
surprising one. Note that this does not include a full syntax check
and fixup and thus it is very well possible that the result is not an
absolute directory.
GnuPG-bug-id: 3720
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (_gnupg_socketdir_internal): Enlarge PREFIX by 6
bytes for "/gnupg".
--
The temporary buffer was to short for the extra "/gnupg". However the
20 bytes for the UID is large enough for all 32 bit UIDs and would
only fail (detected) if a 64 bit UID is used.
Fixes-commit: 17efcd2a2a
Reported-by: Rainer Perske.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: (USE_RUN_GNUPG_USER_SOCKET): New ac_define.
* common/homedir.c (_gnupg_socketdir_internal): Add extra directories.
--
This allows to build GnuPG with an extra socketdir below /run. See
https://lists.gnupg.org/pipermail/gnupg-devel/2017-November/033250.html
for a longer explanation why this is sometimes useful.
Suggested-by: Rainer Perske
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (default_homedir): Strip trailing slashes.
(gnupg_set_homedir): Ditto.
--
is_gnupg_default_homedir() does not ignore trailing slashes when
comparing directory names. This can lead to multiple agents started
on the same directory if the homedir was specified with --homedir or
GNUPGHOME without or with a number of slashes.
We now make sure that the home directory name never ends in a
slash (except for the roo of course).
GnuPG-bug-id: 3295
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (_gnupg_socketdir_internal): Fix error handling.
--
Prior to 26086b36 the non-existance of the socket directory was
considered an error if a non-default home directory is used. Since
26086b36 we now create the directory on demand, but the function still
returned the fallback path. This made the agent bind the socket in
the socket directory, and the client trying to connect to the socket
in the home directory.
Fixes-commit: 26086b362f
Signed-off-by: Justus Winter <justus@g10code.com>
* common/homedir.c (_gnupg_socketdir_internal): Create the
sub-directory.
--
Although there is no auto cleanup (yet) this should be helpful. Let's
see whether possibly leaving stale directories around is better than
running into trouble when --create-socketdir was not used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: New option --enable-gnupg-builddir-envvar.
(ENABLE_GNUPG_BUILDDIR_ENVVAR): New ac_define.
* common/homedir.c (gnupg_set_builddir_from_env): Consider
ENABLE_GNUPG_BUILDDIR_ENVVAR.
* Makefile.am (DISTCHECK_CONFIGURE_FLAGS): Rename to ...
(AM_DISTCHECK_CONFIGURE_FLAGS): this to be future proof. Add option
--enable-gnupg-builddir-envvar.
--
Our regression test suite makes use of the envvar GNUPG_BUILDDIR. Now
the code in gnupg for evaluating this envvar is only included in a
development version (that is one with a "-betaNNN" suffix). For a
real release the envvar is not considered. However during a "make
distcheck" a "make check" is done for the build directory. Without
defining that envar we would try to run binaries in the install
directory ("_inst" sub-directory) which are not yet installed at that
time.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (gnupg_build_directory): New variable.
(gnupg_module_name_called): Likewise.
(gnupg_set_builddir): New function.
(gnupg_set_builddir_from_env): Likewise.
(gnupg_module_name): Support locating components in the build tree.
* common/util.h (gnupg_set_builddir): New prototype.
* tests/openpgp/defs.scm (tools): Drop 'gpg and 'gpg-agent.
(tool): Rename to 'tool-hardcoded.
(gpg-conf): New function, with accessors for the results.
(gpg-components): New variable.
(tool): New function.
* tools/gpgconf.c (enum cmd_and_opt_values): New key.
(opts): New option '--build-prefix'.
(main): Handle new option.
--
This change makes sure that the components from the build tree are
used, and not some older installed version in PATH. It also lets us
make GPGME use components from the build tree, making it possible to
execute GPGME's test suite with them.
Signed-off-by: Justus Winter <justus@g10code.com>
* dirmngr/dirmngr.h (opts): Remove fields 'system_service' and
'system_daemon'.
* common/homedir.c (dirmngr_sys_socket_name): Remove.
(dirmngr_user_socket_name): Rename to ...
(dirmngr_socket_name): this. Change call callers.
* common/asshelp.c (start_new_dirmngr): Remove the system socket
feature.
* tools/gpgconf.c (list_dirs): Do not print "dirmngr-sys-socket".
* sm/server.c (gpgsm_server): Adjust for removed system socket feature.
* dirmngr/server.c (cmd_getinfo): Ditto.
(cmd_killdirmngr): Remove check for system daemon.
(cmd_reloaddirmngr): Ditto.
* dirmngr/dirmngr.c (USE_W32_SERVICE): Remove macro.
(aService): Remove.
(opts): Remove --service.
(w32_service_control): Remove.
(real_main, call_real_main) [W32]: Remove wrapper.
(main): Remove Windows system service feature. Remove system dameon
feature. Use only the "~/.gnupg/dirmngr_ldapservers.conf" file.
* dirmngr/certcache.c (load_certs_from_dir): Remove warning in the
system dameon case.
* dirmngr/crlcache.c (DBDIR_D): Always use "~/.gnupg/crls.d".
* dirmngr/ocsp.c (validate_responder_cert): Do not call
validate_cert_chain which was used only in system daemon mode.
* dirmngr/validate.c (validate_cert_chain): Always use the code.
--
We are now starting dirmngr as needed as a user daemon. The
deprecated system daemon mode does not anymore make sense. In case a
system wide daemon is required, it is better to setup a dedicated
account to run dirmngr and tweak socket permissions accordingly.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c: Include sys/stat.h and zb32.h.
(w32_portable_app, w32_bin_is_bin): Change type from int to byte.
(non_default_homedir): New.
(is_gnupg_default_homedir): New.
(default_homedir): Set non_default_homedir.
(gnupg_set_homedir): Set non_default_homedir and make
the_gnupg_homedir and absolute directory name.
(gnupg_homedir): Return an absolute directory name.
(_gnupg_socketdir_internal): New.
(gnupg_socketdir): Implement /run/user/ based sockets.
* tools/gpg-connect-agent.c (get_var_ext): Replace now obsolete
make_filename by xstrdup.
* tools/gpgconf.c (main): Sue gnupg_homedir for the "homedir:" output.
--
If a [/var]/run/user/$(id -u)/ directory exists, a gnupg subdir is
created as needed and the permissions of the directories are checked.
If that all matches that directory name is returned instead of the
homedir.
To cope with non standard homedirs (via GNUPGHOME or --homedir) the
SHA-1 hash of the homedir is computed, left truncated to 120 bits,
zBase-32 encoded, prefixed with "d.", and appended to
"[/var]/run/user/$(id -u)/gnupg/". If that directory exists and has
proper permissions it is returned as socket dir - if not the homedir
is used. Due to cleanup issues, this directory will not be
auto-created but needs to be created by the user in advance.
The required permissions are: directory owned by the user, group and
others bits not set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (USE_GPG2_HACK): New ac_define am_conditional.
* common/homedir.c (gnupg_module_name): Replace use of macro
NAME_OF_INSTALLED_GPG.
* g10/keygen.c (generate_keypair): Ditto.
* g10/Makefile.am (bin_PROGRAMS): Remove.
(noinst_PROGRAMS): Add gpg or gpg2 and gpgv or gpg2.
(gpg2_hack_list): New.
(use_gpg2_hack): New.
(gpg2_SOURCES): Rename to gpg_SOURCES.
(gpgv2_SOURCES): Rename to gpgv_SOURCES.
(gpg2_LDADD): Rename to gpg_LDADD.
(gpgv2_LDADD): Rename to gpgv_LDADD.
(gpg2_LDFLAGS): Rename to gpg_LDFLAGS.
(gpgv2_LDFLAGS): Rename to gpgv2_LDFLAGS.
(install-exec-hook): Remove WinCE specific rules and add new rules.
(uninstall-local): Uninstall gpg/gpg2 and gpgv/gpgv2.
* tests/openpgp/Makefile.am (required_pgms): s/gpg2/gpg/.
* tests/openpgp/defs.inc: Ditto.
* tests/openpgp/gpgtar.test: Ditto.
* tests/openpgp/mkdemodirs: Ditto.
* tests/openpgp/signdemokey: Ditto.
* Makefile.am (DISTCHECK_CONFIGURE_FLAGS): Remove obsolete
--enable-mailto, add --enable-gpg2-is-gpg.
--
Although we need to duplicate some automake generated code this method
allows to easily switch the name of the installed target using the
configure option "--enable-gpg2-is-gpg".
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (check_portable_app): Remove error message.
--
It is sometimes useful to install just gpgv and no other parts. Our
test for a portable application returned an error if gpgconf is not
installed. That error is not required but was merely a debug aid.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/logging.h: Rename JNLIB_LOG_* to GPGRT_LOG_*.
* common/mischelp.h: Rename JNLIB_GCC_* to GPGRT_GCC_*.
--
JNLIB has no more meaning. Thus we switch to a GPGRT_ prefix in
anticipation that some code may eventually be moved to libgpg-error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (get_default_pinentry_name): New.
(gnupg_module_name): Use that for the default pinentry.
(gnupg_module_name_flush_some): New.
* agent/gpg-agent.c (agent_sighup_action): Flush some module names.
* agent/call-pinentry.c (start_pinentry): Do not modify
opt.pinentry_program.
--
The idea with this change is that under Windows we can install a
simple native Windows pinentry as "pinentry-basic" and a full GUI
version may then later install pinentry-gtk etc which would then
automatically be used.
Unfortunately installing another pinentry from a different package
would clobber the GnuPG core directory which is not nice. To fix that
we would need to agree on standard installation directories for GUIs
to also look there.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (w32_rootdir): Use Unicode fucntion not only for
WinCE.
--
This uses the same code We used for WindowsCE. It has not been tested
with a Unicode requiring installation directory.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (main): Make sure homedir is absolute.
* common/asshelp.c (lock_spawning): Create lock file with an absolute
name.
(start_new_gpg_agent): Use an absolute name for the socket and pass
option --homedir to the agent.
(start_new_dirmngr): Use an absolute name for the --homedir.
--
This patch makes gpg's --homedir option behave again like in older
versions. This is done by starting a new agent for each different
home directory. Note that this assumes --use-standard-socket is used
which is the default for 2.1.
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
* common/homedir.c (w32_bin_is_bin, w32_portable_app) [W32]: New.
(check_portable_app) [W32]: New.
(standard_homedir, default_homedir) [W32]: Support the portable flag.
(w32_rootdir, w32_commondir) [W32]: Ditto.
(gnupg_bindir, gnupg_cachedir, dirmngr_socket_name) [W32]: Ditto.
* common/logging.h (JNLIB_LOG_NO_REGISTRY): New.
* common/logging.c (no_registry): New variable.
(log_set_prefix, log_get_prefix): Set/get that variable.
(do_logv): Do not check the registry if that variable is set.
--
Beware: This code has not been tested because it is not yet possible
to build GnuPG 2.1 for Windows. However, the code will be the base
for an implementation in 2.0.
A portable use of GnuPG under Windows means that GnuPG uses a home
directory depending on the location of the actual binary. No registry
variables are considered. The portable mode is enabled if in the
installation directory of the the binary "gpgconf.exe" and a
file "gpgconf.ctl" are found. The latter file is empty or consists
only of empty or '#' comment lines.
Signed-off-by: Werner Koch <wk@gnupg.org>
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
