* agent/divert-scd.c (ask_for_card): Don't use SERIALNO to select
card, but use KEYGRIP.
GnuPG-bug-id: 4695
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (cmd_serialno): Add option --all.
(open_card_with_request): Implement that option.
* scd/app.c (select_all_additional_applications_internal): New.
(select_additional_application): Add mode to call new function.
--
This option is currently only useful for Yubikeys and basically
ignored with other cards. Its use is
SERIALNO --all
LEARN --force --multi
which will then print keypairinfo and other stuff for the OpenPGP and
PIV application of a Yubikey. Scute is going to use this to allow
using certificates from OpenPGP and PIV at the same time.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (select_additional_application): Return error for unknown
NAME.
--
ERR was only set but not used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (APP_LEARN_FLAG_MULTI): New.
* scd/command.c (cmd_learn): Add option --multi.
* scd/app.c (app_write_learn_status): Factor some code out to ...
(write_learn_status_core): new.
(app_write_learn_status): Implement flag --multi.
--
This new option is intended to return information about all active
applications of the current card. Thus if a "SERIALNO openpgp" and a
"SERIALNO piv" has been done in a session the command "LEARN --force
--multi" returns information about both applications.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (APP_LEARN_FLAG_KEYPAIRINFO): New flag macro..
* scd/command.c (cmd_learn): Pass that flag instead of a plain number.
* scd/app-nks.c (do_learn_status_core): Use new flag.
* scd/app-p15.c (do_learn_status): Ditto.
* scd/app-piv.c (do_learn_status): Ditto.
* scd/app-sc-hsm.c (do_learn_status): Ditto.
* scd/app.c (app_write_learn_status): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_add_resource): Call keybox_compress.
* sm/keydb.c (keydb_add_resource): Release the lock after a compress.
--
Note that in gpgsm we already did the compress run but we didn't
released the lock on the file. This might have been a reason for some
strange hangs.
GnuPG-bug-id: 4644
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-dump.c (_keybox_dump_file): Take deleted records in
account.
--
This also changes the numbering of the records to reflect the real
record number.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-update.c (keybox_compress): Change condition back.
Also use make_timestamp for CUT_TIME.
--
Fixes-commit: 824ca6f042dc69edaf67bf9d4e875be75babab00
Note that the original change was not backported to 2.2.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (akl_empty_or_only_local): New.
* g10/gpg.c (DEFAULT_AKL_LIST): New.
(main): Use it here.
(main) <aLocateExtKeys>: Set default AKL if none is set.
--
This better matches the expectations of the user. The used list in
this case is the default list ("local,wkd") with local ignored by the
command anyway.
GnuPG-bug-id: 4662
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (glo_ctrl): Add flag silence_parse_warnings.
* g10/keylist.c (list_all): Set that during secret key listsings.
* g10/parse-packet.c (unknown_pubkey_warning): If new flag is set do
not print info message normally emitted inh verbose mode.
(can_handle_critical_notation, enum_sig_subpkt): Ditto.
(parse_signature, parse_key, parse_attribute_subpkts): Ditto.
--
Those messages are annoying because they might be emitted due to
parsing public keys which are latter not shows because the secret part
is missing. No functional regressions are expected because --verbose
should not change anything.
Note that this suppression is only done if no arguments are given to
the command; that is if a listing of the entire keyring is requested.
Thus to see the earnings anyway, a listing of a single or group of
keys can be requested.
GnuPG-bug-id: 4627
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (verify_own_keys): Silence informational diagnostic.
--
This silences these notes with --quiet
gpg: Note: RFC4880bis features are enabled.
gpg: key EE65E8C75D41FD1D marked as ultimately trusted
GnuPG-bug-id: 4634
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (parse_key_parameter_part): Add arg R_KEYGRIP and
support the special algo "card".
(parse_key_parameter_string): Add args R_KEYGRIP and R_SUBKEYGRIP.
Handle the "card" algo. Adjust callers.
(parse_algo_usage_expire): Add arg R_KEYGRIP.
(quickgen_set_para): Add arg KEYGRIP and put it into the parameter
list.
(quick_generate_keypair): Handle algo "card".
(generate_keypair): Also handle the keygrips as returned by
parse_key_parameter_string.
(ask_algo): Support ed25519 from a card.
--
Note that this allows to create a new OpenPGP key from an initialized
OpenPGP card or from any other supported cards. It has been tested
with the TCOS Netkey card. Right now a stub file for the cards might
be needed; this can be achieved by running "gpgsm --learn" with the
card plugged in.
Example:
gpg --quick-gen-key foo@example.org card
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (ask_algo): Identify the standard keys.
--
The asterisks mark the usages of a key as retruned by scd via the
$AUTHKEYID et al. attributes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (do_getattr): Add new attributes.
--
Note that these were already added to 2.2 as part of
commit 23784f8bf0ac6d6c52cb2de2f99f46017a92c11a
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Add option.
(main): Set flag.
* g10/options.h: Add flags.use_only_openpgp_card.
* g10/call-agent.c (start_agent): Implement option.
--
With the previous patch we switch to autoselect an application
instead of requesting an openpgp card. This option allows to revert
this in case of use use cases which expected the former behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit c185f6dfbd1bfd809369da789239a371e9d1610e)
This was first added to the 2.2 branch.
* scd/app.c (select_additional_application): Initialize card of APP.
Break after the selection.
Don't free APP if success.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* doc/gpg-agent.texi: improve documentation of CARD entry in
GETEVENTCOUNTER description.
--
"stati" is unclear and confusing, and describing something in the
singular is almost always less ambiguous than leaving it in the
plural.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* Makefile.am (EXTRA_DIST): Add wixlib.wxs
* build-aux/speedo.mk (w32-wixlib): New target.
(w32-release): Build wixlib if WIXPREFIX is set.
(help): Add documentation.
* build-aux/speedo/w32/wixlib.wxs
--
This build a wixlib of the Windows binaries of GnuPG.
A wixlib is a module that can be linked into another
wix project to create an installer including this
module. Gpg4win uses the wixlib from GnuPG for
it's MSI Package.
To build the wixlib you need wine with wine-mono installed
and the wixtoolset.
When calling speedo set the variable WIXPREFIX to
the location containing the extracted toolset.
e.g.:
make -f build-aux/speedo.mk w32-wixlib WIXPREFIX=~/wix
* build-aux/speedo.mk (AUTHENTICODE_SIGNHOST): New.
(AUTHENTICODE_TOOL): New.
(AUTHENTICODE_FILES): New.
(installer): Sign listed files.
(AUTHENTICODE_SIGNHOST): New macro.
(sign-installer): Use that macro instead of direct use of osslsigncode.
--
This also adds code to support signing via a Token. Because there is
no specification of that token, I was not able to write a free driver
for it. Thus we resort to use a running Windows-10 instance with an
enabled ssh server to do the code signing.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit e6901c2bc802996c24335bcb35012ccb74b4ced0)
* configure.ac: New option --keyboxd-pgm.
(KEYBOXD_NAME, KEYBOXD_DISP_NAME): New ac_defines.
* common/util.h: Add substitutes for new error codes.
(GNUPG_MODULE_NAME_KEYBOXD): New.
* common/homedir.c (gnupg_module_name): Support
GNUPG_MODULE_NAME_KEYBOXD.
* common/asshelp.c (SECS_TO_WAIT_FOR_KEYBOXD): New.
(wait_for_sock): Support keyboxd.
(start_new_service): Ditto.
(start_new_keyboxd): New.
* tools/gpg-connect-agent.c: New options --keyboxd and
--keyboxd-program.
(start_agent): Implement new option.
--
This change allows us to test the new keyboxd using our standard
helper. It also provides the necessary code to start keyboxd on the
fly.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Report status of STATUS_NO_SECKEY
only when some error occurred.
--
Fixes-commit: 6cc4119ec03be61c78189a0bec99372035289b91
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/homedir.c (gpg_agent_socket_name): New.
* common/asshelp.c (start_new_service): New. Based on
start_new_gpg_agent.
(start_new_gpg_agent): Divert to start_new_service.
(start_new_dirmngr): Ditto.
--
This prepares for adding yet another service starting function.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp2.c (status_printf): Rename to status_no_printf.
(status_printf): New.
--
Using the the status identifier from status.h is a good idea for the
external API but for some inter-component status line a keyword is a
better way.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (agent_pkdecrypt): accept but do not require
NUL-terminated data from the agent.
* sm/call-agent.c (gpgsm_agent_pkdecrypt): accept but do not require
NUL-terminated data from the agent.
GnuPG-bug-id: 4652
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/photoid.c (exec_write, exec_read, exec_finish): Remove.
(setup_input_file): Rename from make_tempdir.
(expand_args): Drop support of 'o' and 'O'.
(fill_command_argv, run_with_pipe, create_temp_file) New.
(show_photo): New with gnupg_spawn_process_fd and gnupg_wait_process.
(show_photos): Call show_photo.
GnuPG-bug-id: 4362
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (bulk_in): Increase timeout by the multiplier
value as defined section 6.2.6 in CCID specification.
--
For TPDU level transfer, it was handled. This is fix for APDU level
transfer.
GnuPG-bug-id: 4646
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (ccid_transceive_apdu_level): Use bBWI=0 for APDU
level transfer.
(ccid_transceive): Use bBWI=0 or the value returend by WTX for TPDU
level transfer.
GnuPG-bug-id: 4654
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
