* g10/keygen.c (ask_key_flags_with_mask): Allow more than ECDH for
legacy curves.
(ask_algo): Tweak mapping of ECC to OpenPGP algos
(parse_key_parameter_part): Ditto.
(generate_subkeypair): Create the subkey with the time stored on the
card.
--
This fixes two problems with generating keys from a card:
1. The key usage is now set correctly for brainpool curves.
2. The add-key and --quick-add-key commands now also take the creation
time from the time stored on the card. Without that we would need
to update the creation time and fingerprint already stored on the
card which is a no-go if another key has already been created using
that on-card key.
Note: To create a key on a card without an OpenPGP keyblock use
gpg-card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.c: Include tlv.h.
(cmd_writecert): Add option --openpgp.
(cmd_readcert): Ditto.
--
We use the CERT object for this and encapsulate the key block in a CMS
object.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_apdu): Add optional arg 'options'.
* tools/gpg-card.c (cmd_apdu): New.
(enum cmdids): Add cmdAPDU.
(dispatch_command): Add command "apdu".
(interactive_loop): Ditto.
--
This command is hidden because it can be used to brick a card. The
command is basically the same as sending "scd apdu" in
gpg-connect-agent but here we do full decoding and printing in hex.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.c (cmd_list): Take care of the need_sn_cmd flag.
(cmd_factoryreset): Clear that flag.
(dispatch_command): Set flag after a reset and after a
CARD_NOT_PRESENT error.
--
* tools/card-call-scd.c (learn_status_cb): Return the full value for
UIF. Add info about SM, MCL3, and PD.
* tools/gpg-card.h (struct card_info_s): Add corresponding fields.
* tools/gpg-card.c (list_openpgp): Print capabilities. Print the
permanent flag for UIF.
(cmd_uif): Implement.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_getattr): New attrubute "UIF".
(do_learn_status): Use that.
--
Actually this is not just convenience but will make it easier to add
new keys to an openpgp card - we will need to change this only at one
place.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (select_all_additional_applications_internal): Re-select
first app. Add arg 'ctrl'.
--
Usually keygrip based access to the Yubikey does a switching back and
forth and thus keeps the card and scdaemon's internal state in sync.
However, if we do only a listing scdaemon did not reselect the first
application (e.g. OpenPGP) after adding other applications (e.g. PIV)
and thus led to wrong info returned in a listing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Now, it's only for
encrytion.
(pk_ecdh_decrypt): Use prepare_ecdh_with_shared_point and move decrypt
code path in original pk_ecdh_encrypt_with_shared_point here.
* g10/pkglue.h (pk_ecdh_encrypt_with_shared_point): Change API.
* g10/pkglue.c (pk_encrypt): Follow the change.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/ecdh.c (build_kdf_params): New.
(pk_ecdh_encrypt_with_shared_point): Use build_kdf_params, and check
things before extract_secret_x.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* dirmngr/dns.h (dns_strsection, dns_strclass)
(dns_strtype): Change APIs.
* dirmngr/dns.c (dns_p_lines): Use __dst for dns_strsection.
(dns_rr_print): Use __dst for dns_strclass and dns_strtype.
(dns_trace_dump): Likewise.
(dns_ai_print): Use __dst for dns_strtype.
(dns_strsection): Add an argument __dst for storage.
(dns_strclass, dns_strtype): Likewise.
(parse_packet): Use __dst for dns_strsection.
(send_query): Use __dst for dns_strtype.
(isection): Use __dst for dns_strsection.
(iclass): Use __dst for dns_strclass.
(itype): Use __dst for dns_strtype.
GnuPG-bug-id: 4934
Reported-by: Tomas Mraz
Fixes-commit: 455ef62d29
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* sm/misc.c (transform_sigval): Support EdDSA.
* sm/certreqgen.c (create_request): Support EdDSA cert creation.
* sm/certcheck.c (gpgsm_check_cert_sig): Map some ECC algo OIDs to
hash algos.
* sm/call-agent.c (struct sethash_inq_parm_s): New.
(sethash_inq_cb): New.
(gpgsm_agent_pksign): Add mode to pass plain data for EdDSA.
--
Tested using a parameter file
Key-Type: EdDSA
Key-Length: 1024
Key-Grip: 09D9AE3D494F7888C93BE5106AD8A734A87617F0
Key-Usage: sign
Serial: random
Name-DN: CN=dummy test ed25519
where the keygrip is from a gpg generated Ed25519 key. ECDSA was
tested using
Key-Type: ECDSA
Key-Length: 1024
Key-Grip: 8E06A180EFFE4C65B812150CAF19BF30C0689A4C
Key-Usage: sign
Serial: random
Name-DN: CN=dummy test nistp256
and RSA using
Key-Type: RSA
Key-Length: 2048
Key-Grip: C6A6390E9388CDBAD71EAEA698233FE5E04F001E
Key-Usage: sign
Serial: random
Name-DN: CN=dummy test rsa
The command used in all cases is
gpgsm -v --gen-key --batch a.parm >a.crt
gpgsm -v --import <a.crt
More support, in particular in the user interface, is required and
will follow soon.
GnuPG-bug-id: 4888
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (struct server_control_s): Add field digest.data.
* agent/gpg-agent.c (agent_deinit_default_ctrl): Free that field.
* agent/command.c (reset_notify): Ditto.
(start_command_handler): ditto.
(cmd_sethash): Add new option --inquire.
* agent/call-scd.c (agent_card_pksign): For now return an error if
inquire mode was used.
* agent/command-ssh.c (ssh_handler_sign_request): Make sure
digest.data is cleared.
* agent/divert-scd.c (divert_pksign): Implement inquire mode.
* agent/pksign.c (agent_pksign_do): Ditto.
--
This is required to support EdDSA according to RFC8410.
GnuPG-bug-id: 4888
* sm/certdump.c (gpgsm_get_serial): New.
* sm/certcheck.c (gpgsm_check_cert_sig): Support EdDSA signatures.
--
Note that this does not work with the self-signed RFC-8410 sample
certificate; see the code for comments.
The Ed488 case has not been tested due to a lack of support in
Libgcrypt.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.h (struct certlist_s): Add helper field pk_algo.
* sm/sign.c (gpgsm_sign): Store the public key algo. Take the hash
algo from the curve. Improve diagnostic output in verbose mode.
--
GnuPG-bug-id: 4098
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/decrypt.c (ecdh_decrypt): Support
dhSinglePass-stdDH-sha1kdf-scheme. Factor key derive code out to ...
(ecdh_derive_kek): new global function. Allow for hashs shorter than
the key.
(hash_ecc_cms_shared_info): Make file-only.
* sm/encrypt.c (ecdh_encrypt): Replace derive code by a call to the
new ecdh_derive_kek. Add test code to create data using
dhSinglePass-stdDH-sha1kdf-scheme.
* sm/gpgsm.h (opt): Add member force_ecdh_sha1kdf.
* sm/gpgsm.c: Add option --debug-force-ecdh-sha1kdf.
--
I did some test against
Governikus_Signer: 2.9.2.0
MCard security Provider: 2.4.0
Algorithm catalog from: 05.12.2019
using a Signature Card v2.0 and a nistp256 certificate. Encrypting
with Governikus used the stdDH-sha1kdf scheme which we can now
decrypt. Encrypting with GPGSM uses for that curve the recommended
scheme sha256kdf but Governikus was not able to decrypt this (no
usable error message). Encrypting using stdDH-sha1kdf with GPGSM by
using the new --debug-force-ecdh-sha1kdf option showed that
Governikus was able to decrypt this.
FWIW: RFC5753 (Use of Elliptic Curve Cryptography (ECC) Algorithms)
has this requirement:
Implementations that support EnvelopedData with the
ephemeral-static ECDH standard primitive:
- MUST support the dhSinglePass-stdDH-sha256kdf-scheme key
agreement algorithm, the id-aes128-wrap key wrap algorithm, and
the id-aes128-cbc content encryption algorithm; and
which Governikus seems not to fulfill.
GnuPG-bug-id: 4098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sexputil.c (cipher_mode_to_string): New.
* sm/decrypt.c (prepare_decryption): Show cipher algo and mode.
(gpgsm_decrypt): Show key algo and fingerprint
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sexputil.c (pubkey_algo_to_string): New.
* sm/certcheck.c (do_encode_md): Replace GCRY_PK_ECDSA by GCRY_PK_ECC.
* sm/certreqgen-ui.c (check_keygrip): Add all ECC algorithms.
* sm/gpgsm.c (our_pk_test_algo): Also allow EdDSA.
* sm/verify.c (gpgsm_verify): Map ECC algo to ECDSA. Use new pubkey
algo name function
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/verify.c (gpgsm_verify): Print the used algorithms.
--
Note that we now use the full fingerprint instead of the certificate
id. This better aligns with what we do in gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (learn_status_cb): Always fill chvinfo.
* tools/gpg-card.h (struct card_info_s): Increase size of chvinfo and
chvmaxlen.
* tools/gpg-card.c (list_nks): New.
(print_a_version): Support single part version numbers.
(list_card): Call list_nks.
--
Note that chvmaxlen is not yet used with NKS.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (get_dispserialno): Move more to the top.
(do_getattr): Add $DISPSERIALNO and SERIALNO. Make CHV-STATUS work
with NKS15.
(verify_pin): Use dedicated min. PIN lengths.
(parse_pwidstr): Support NKS15
--
GnuPG-bug-id: 4938
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/fingerprint.c (gpgsm_get_key_algo_info): Factor code out to ...
(gpgsm_get_key_algo_info2): new.
(gpgsm_pubkey_algo_string): New.
* sm/keylist.c (list_cert_colon): Put curve into field 17
(list_cert_raw): Print the unified key algotithm string instead of the
algo and size.
(list_cert_std): Ditto.
--
It is important to known whether a 256 bit ECC uses a NIST or a
Brainpool curve.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/decrypt.c (ecdh_decrypt): Add arg nbits and detect bare secret.
(prepare_decryption): Add arg nbits and pass on.
(gpgsm_decrypt): Pass size of curve to prepare_decryption.
--
GnuPG-bug-id: 4098
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (struct fid_cache_s): New.
(struct app_local_s): Add field 'fid_cache'.
(do_deinit): Release the cache.
(keygripstr_from_pk_file): Implement the cache.
(find_fid_by_keyref): New
(do_sign, do_decipher): Use new function.
(do_with_keygrip): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/decrypt.c (hash_ecc_cms_shared_info): Make global.
* sm/encrypt.c (ecdh_encrypt): New.
(encrypt_dek): Add arg PK_ALGO and support ECDH.
(gpgsm_encrypt): Pass PK_ALGO.
--
Note: This has only been tested with a messages created and decrypted
by GnuPG.
GnuPG-bug-id: 4098
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/minip12.c [TEST]: Remove test code. Include util.h, tlv.h. and
openpgpdefs.h. Remove the class and tag constants and replace them by
those from tlv.h.
(builder_add_oid, builder_add_mpi): New.
(build_key_sequence): Rename to ...
(build_rsa_key_sequence): this.
(build_ecc_key_sequence): New.
(p12_build): Call RSA or ECC builder.
(p12_raw_build): Ditto.
* sm/export.c (gpgsm_p12_export): Use correct armor header for ECC.
(sexp_to_kparms): Support ECC.
* sm/t-minip12.c: New to replace the former TEST code in minip12.h.
--
GnuPG-bug-id: 4921
* common/tlv-builder.c: New.
* common/tlv.c: Remove stuff only used by GnuPG 1.
(put_tlv_to_membuf, get_tlv_length): Move to ...
* common/tlv-builder.c: here.
* common/tlv.h (tlv_builder_t): New.
--
Such code should actually go into libksba and we will eventually do
that. However, for now it is easier to keep it here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/decrypt.c: Include tlv.h.
(string_from_gcry_buffer): New.
(hash_ecc_cms_shared_info): New.
(ecdh_decrypt): New.
(prepare_decryption): Support ECDH. Add arg pk_algo.
(gpgsm_decrypt): Lift some variables from an inner code block.
--
Note: This has only been tested with a single messages created by
OpenSSL and taken from the Mozilla bug tracker. In particular the
code to included UserKeyingMaterial (ukm) has not been tested.
GnuPG-bug-id: 4098
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c: Major rework to support non-RSA cards.
--
This is a fist step so support this ECC card. The code has been
reworked while taking care that old cards should keep on working.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (send_card_and_app_list): Detect no app case.
--
This is a minor nug fix to return a better error message.
Signed-off-by: Werner Koch <wk@gnupg.org>
